MODULAR Connection fitting for recess mounting Finish: Burnished : For recess mounting The plate should allways be installed so that the supporting plate butts against the end of the recess. For rapid release fastenings Min. wood thickness mm Length L mm Width B mm Milling depth mm 16 63 1 8.3 ±0.05 6.47.049 17 58 13 11.3 ±0.05 6.47.01 0 16 11.3 ±0.05 6.47.076 Semi locking, for semi-permanent fastings Min. wood thickness mm Length L mm Width B mm Milling depth mm 13 63 11 8.3 ±0.05 6.47.094 16 1 6.47.058 We reserve the right to alter specifications without notice (SEA Furniture Fittings 01). For push-fitting, for shelves MODULAR for shelves MODULAR for rapid release fastenings Note For front fitting, a MODULAR fitting for rapid release fastenings ( 6.47.01) is recommended. The plate should allways be installed so that the supporting plate butts against the end of the recess. Min. wood thickness mm Length L mm Width B mm Milling depth mm 17 58 13 11.3 ±0.05 6.47.003 FF.63
MODULAR Connecting screws Finish: Galvanized For one-sided installation in wood For Modular plate width mm For drilled hole mm Thread length L mm 11 13 Ø4 1.5 6.47.978 16.0 6.47.987 5.0 6.47.996 3.0 6.47.870 16 Ø5 16.0 6.47.889 3.0 6.47.898 Packing: 100 or 500 pcs. For double-sided installation in wood Wood thickness For Modular plate width mm For wood thickness mm 10 13 18 1 6.47.95 Packing: 100 or 500 pcs. For installation in metal, with self-tapping thread For Modular plate width mm For drilled hole mm Thread 11 13 Ø4. Ø3/16 6.47.969 16 Ø5. Ø7/3 6.47.861 Packing: 100 or 500 pcs. We reserve the right to alter specifications without notice (SEA Furniture Fittings 01). FF.64
Two-piece dowel connector, plug-in For press fitting with nylon bushing Two-piece Colour: Natural coloured For drilling hole Ø: 10 mm Version For drilling hole D mm Two-piece Ø10 67.1.70 Three-piece 67.1.730 Three-piece Drilling pattern With dowel headed screw and centring pin, -part Mateial: Steel dowel headed screw, nylon sleeve Finish: Galvanized dowel headed screw, brown sleeve For drilling hole Ø: 8 mm For drilling hole D mm Ø8 67..900 Packing: 100 pcs. We reserve the right to alter specifications without notice (SEA Furniture Fittings 01). Door panel connecting bolt For knocking in Spacer plate Door panel connecting bolt Material Finish Steel Chromatized 67.3.900 FF.65
Spacer plate for providing the required gap between the door and the panel Material Colour Plastic Transparent 67.3.093 Sleeve with internal threaded for drilled through-hole Ø5 mm Finish: Galvanized For drilling hole mm Length L mm Ø5 15 67.00.911 18 67.00.91 67.00.913 30 67.00.916 Threaded screw M4 for drilled through-hole Ø5 mm Finish: Nickel plated Type of head: Countersunk head Drive: PZ cross slot and and flat blade Length L mm 15 0.34.157 5 0.34.55 Countersunk head threaded sleeve for drilled through-hole Ø5 mm Finish: Nickel plated Drive: PZ cross slot and flat blade Length L mm For wood thickness mm 7 8 36 67.01.715 35 37 45 67.01.717 Packing: 100, 500 or,000 pcs. We reserve the right to alter specifications without notice (SEA Furniture Fittings 01). FF.66
Connecting screw and sleeve with M6 thread -pieces Material: Connecting screw steel with plastic head Finish: Bright Drive: Flat blade Length L mm For wood thickness mm Head colour 8 30 39 White 67.06.7 Brown 67.06.1 34 34 43 White 67.06.73 Brown 67.06.13 Flat head screw without tip with M6 thread Drive: Size 4 hexagon socket SW4 Length L mm Finish 60 Nickel plated 64.71.760 Burnished 64.71.160 Sleeve nut with flat head with M6 thread Drive: Size 4 hexagon socket SW4 We reserve the right to alter specifications without notice (SEA Furniture Fittings 01). Material Finish Steel Nickel plated 64.75.76 Burnished 64.75.16 Packing: 100 or,000 pcs. FF.67
Wood dowels Material: Beech Suitable for automatic feed Diameter mm Length L mm Pcs. per kg 5 5 300 67.8.06 6 5 150 67.8.15 30 1800 67.8.130 35 150 67.8.135 40 135 67.8.140 8 7 1140 67.8.7 30 1000 67.8.30 35 865 67.8.35 40 760 67.8.40 50 600 67.8.50 10 30 630 67.8.330 35 530 67.8.335 40 450 67.8.340 45 435 67.8.345 50 360 67.8.350 60 35 67.8.360 1 40 330 67.8.440 50 60 67.8.450 60 0 67.8.460 16 10 65 67.8.61 155 50 67.8.615 Packing: 10 kg. Wood biscuits, thickness 4 mm K 0 Straightening biscuits Information For any type ot biscuit connection, one or two K 0 straightening biscuits can be inserted between the wooden biscuits Size Groove depth mm Length L mm Width B mm 0 8 47 15 67.90.000 10 10 53 19 67.90.010 0 1 56 3 67.90.00 3 16 56 30 67.90.003 Packing: 1,000 pcs. Area of application: For fixing and exact tightening of connected parts Material Colour Thickness mm Plastic Red 3 67.91.00 Packing: 50 pcs. We reserve the right to alter specifications without notice (SEA Furniture Fittings 01). FF.68
CLAMEX Carcase connector Drill 6 mm hole for tightening element Cut 8 mm groove for RTA connector (biscuit jointer, setting D = 14.7 mm), alternatively x 4 mm recess Plug in RTA connector and secure with 3.5 x 15 mm Pan head screw Join workpieces and tighten with sw 4 Allen key Area of application: Powerful detachable biscuit joints, for coner, centre panel and surface joints,as well as mitred joints (6.01.007) of 30-150, for solid wood and board material Version: Clamex S-18 with metal latch: For structures that can be dismantled, including those in continuous use, e.g. in exhibition (up to 000 N), aligning studs (ribbed) prevent torsional movement and are used for lateral workpiece adjustment, no protruding parts on the surface (stackable) For wood thickness: Form 16 mm Material: Plastic, bolt zinc alloy Drive: Size 4 hexagon socket SW4 Adjustment facility: at side ±1 mm Version Packing CLAMEX S-18 with zinc alloy latch 1 pack 67.91.11 50, 50 or 1,000 sets 67.91.1 Order reference We recommend the use of the 8mm blade for the Classic C3 biscuit jointer for cutting the recess for the RTA connector. Please order Clamex drilling jig separately for mitred joints. We reserve the right to alter specifications without notice (SEA Furniture Fittings 01). Supplied with Pack: 18 pairs of RTA connectors including 75 Pan head screws 3x5 mm Marking jig 90, SW 4 Allen key Set: 50, 50 or 1,000 pairs of RTA connectors FF.69
Blade 8 mm for CLAMEX carcase connector Area of application: For 8 mm grooves, for the classic C3 biscuit jointer Dimension mm 100 x x 8 006.89.00 Packing: 1 pc. Drilling jig for CLAMEX carcase connector Area of application: For cutting mitred joints of 30 150 Version Drilling jig 001.6.600 Packing: 1 set. Angle beadings For mitre angle 90, plywood Area of application: For strong corner joints and neat front edges, for gluing in carcase clamp Colour: Natural colour Length: 50 mm For mitre angle 135, plywood For wood thickness mm Dim. A mm Dim. B mm 16 1 4 60.17.041 19 14 5 60.17.050 16 6 60.17.069 Packing: 00 pcs. Area of application: For strong corner joints and neat front edges, for gluing in carcase clamp Colour: Natural colour Length: 50 mm For wood thickness mm 19 60.17.158 Packing: 00 pcs. We reserve the right to alter specifications without notice (SEA Furniture Fittings 01). FF.70
Connecting brackets Universal brackets Area of application: For connecting cabinet elements, for attaching rear panels, for inset and surface mounted furniture part : For screw fixing, cover cap for pushing on (for universal bracket for 3 mm series drilled holes) Version Material Finish For 5 mm series drilled holes For 3 mm series drilled holes For 5 mm series drilled holes Universal bracket Steel Bright galvanized 64.8.955 For 3 mm series drilled holes Universal bracket Steel Bright galvanized 64.5.99 Plastic coated white 64.5.73 Cover cap Plastic Brown 64.5.19 Black 64.5.39 White aluminium 64.5.59 White 64.5.79 Packing: 50 or 00 pcs. For 3 mm series drilled holes, plastic coated white We reserve the right to alter specifications without notice (SEA Furniture Fittings 01). Bracket Finish: Galvanized Material thickness: mm Angle: 90 Dimension mm 5 x 5 x 4 60.6.991 40 x 40 x 40 60.6.993 Packing: 1 pc. FF.71
Brackets Finish: Galvanized Material thickness: mm Angle: 90 Dimension mm 5 x 5 x 17 60.8.961 30 x 30 x 17 60.8.96 40 x 40 x 17 60.8.963 50 x 50 x 17 60.8.964 75 x 75 x 17 60.8.965 Packing: 1 pc. Finish: Nickel plated Version With Slots 558.1.943 Packing: 1 or 50 pcs. Profiled plate for machined-recess installation Area of application: As bed or sofa frame connectors Finish: Bright Insatllation: For machined-recess installation and screwing, for hooking onto raised head countersunk chipboard screws Height For hooking onto screw 46 Ø3.0 71.53.000 Packing: 100 or 00 pcs. We reserve the right to alter specifications without notice (SEA Furniture Fittings 01). FF.7
Keku Suspension fittings Information The at KEKU constitutive room system KEKU R (shop fittings) you will find in section 11. Area of application: For fastening panels to frame sructures Material: Plastic (Makrolon) Colour: Black Temperature range: -100 ºC to +135 ºC Note Do not treat with chemical solutions or aggressive greases Do not adjust by hammering EH Frame component For screw-fixing to substructures Chipboard screws with countersunk head Ø4.0mm 6.49.365 VARIANTA countersunk head Ø3.0 mm or 6.49.366 Packing: 00 pcs. We reserve the right to alter specifications without notice (SEA Furniture Fittings 01). For groove mounting and screw-fixing to substructures Countersunk chipboard screws Ø4.0 mm 6.49.360 Packing: 00 pcs. FF.73
EHS Frame component For screw-fixing to substructures, with side guide : For screw-fixing to substructures with Ø4 mm chipboard screws or VARIANTA Ø3 mm or 5 mm special screws Function The side guide 1 Prevent the workpiece from slipping sideways Keep the workpiece edge parallel 3 Creates a lateral connection in conjunction with the panel Chipboard screws with countersunk head Ø4.0mm 6.49.367 Varianta countersunk head Ø3.0 mm or 6.49.368 Packing: 00 pcs. Panel component with lip Chipboard screws with countersunk head Ø 4.0mm 6.49.356 Varianta countersunk head Ø3.0 mm or 6.49.357 Packing: 00 pcs. Panel component without lip for panels that are frequently removed Note The combined use of panel components with and without lip reduces the overall snap-in function. Chipboard screws with countersunk head Ø4.0mm 6.49.350 VARIANTA countersunk head Ø3.0 mm or 6.49.351 Packing: 00 pcs. We reserve the right to alter specifications without notice (SEA Furniture Fittings 01). FF.74
KEKU Push-in fittings Area of application: For fastening panels to frame sructures Material: Plastic (Makrolon) Colour: Black Temperature range: -100 ºC to +135 ºC Note Do not treat with chemical solutions or aggressive greases Do not adjust by hammering Not for suspended loads such as ceiling panel AS Frame component for screw-fixing to subframes Chipboard screws with countersunk head Ø4.0mm 6.50.368 VARIANTA countersunk head Ø3.0 mm or 6.50.377 Packing: 00 pcs. We reserve the right to alter specifications without notice (SEA Furniture Fittings 01). ASR Frame component for screw-fixing to subframes Chipboard screws with countersunk head Ø4.0mm 6.50.390 VARIANTA countersunk head Ø3.0 mm or 6.50.391 Packing: 00 pcs. FF.75
AS Panel component for screw- fixing to panels Chipboard screws with countersunk head Ø4.0mm 6.50.359 VARIANTA countersunk head Ø3.0 mm or 6.50.358 Packing: 00 pcs. KEKU AD Double partition fitting Double partition fittings are used for: Attaching sound insulating material to door leaf Constructing cavity-type doors Double partitions on carbinet sides in door alcoves Connecting frame elements Linking elements Constructing sandwich elements Installing lightweight partition Mounting wall elements (carbinet construction) Door installation as panel construction Material: Plastic (Makrolon) Colour: Black Temperature range: -100 ºC to +135 ºC Note Do not treat with chemical solutions or aggressive greases Do not adjust by hammering AD 15 Angeled component for panel distance of 15 mm, screw-fixing to subframes Chipboard screws with countersunk head Ø4.0mm 6.51.380 VARIANTA countersunk head Ø3.0 mm or 6.51.381 Packing: 00 pcs. We reserve the right to alter specifications without notice (SEA Furniture Fittings 01). FF.76
AD 30 Angeled component for panel distance of 30 mm, screw-fixing to subframes Chipboard screws with countersunk head Ø4.0mm 6.51.390 VARIANTA countersunk head Ø3.0 mm or 6.51.391 Packing: 00 pcs. Panel component with lip, for screw-fixing to panels Chipboard screws with countersunk head Ø4.0mm 6.49.356 VARIANTA countersunk head Ø3.0 mm or 6.49.357 Packing: 00 pcs. EH Spacer plate 1.5 mm We reserve the right to alter specifications without notice (SEA Furniture Fittings 01). HOSPA Chipboard screws 6.49.353 VARIANTA Countersunk screws 6.49.355 Packing: 400 pcs. FF.77
Bed fitting for beds with central tie bar, disengageable : For screw fixing Supplied with 1 supporting bracket 1 retaining plate Finish Chromatized 73.03.510 Packing: 10 or 100 pcs. Bed fitting with cranked hook-in part Striking plate (Height 100 mm) Hook-in part (Height 100 mm) Mounting: Left and right hand : For screw fixing Supplied with (per unit) 4 Striking plates 4 Hook-in parts Striking plate Hook-in part (Height 130 mm) (Height 130 mm) Height mm Finish 100 Yellow galvanized 71.03.510 Chromatized 71.03.910 130 Yellow galvanized 71.03.530 Chromatized 71.03.930 Packing: 10 or 30 pcs. We reserve the right to alter specifications without notice (SEA Furniture Fittings 01). FF.78
Bed plinth connector for single and double beds Bed side panel Connecting screw Bed plinth Bed plinth connector For plinth thickness of 19 mm Wing nut For plinth thickness of 3 mm Finish: Galvanized Mounting: For right and left hand use : For screw-fixing Plinth thickness mm 19 73.07.937 3 73.07.946 Packing: 4 or 40 pcs. Order reference Please order connecting screw and wing nut separately. Angled bracket We reserve the right to alter specifications without notice (SEA Furniture Fittings 01). Finish: Galvanized Material thickness: 1.4 mm Angle: 90 Dimension mm x 5 x 130 71.0.901 Packing: 1 pc. FF.79