*RoHS OMPLINT VRSIONS VILL eatures Lead free versions available RoHS compliant (lead free version)* Surface Mount SM package Standoff Voltage: 5. to 17 volts Power issipation: 6 watts 214 Transient Voltage Suppressor iode Series General Information The markets of portable communications, computing and video equipment are challenging the semiconductor industry to develop increasingly smaller electronic components. ourns offers Transient Voltage Suppressor iodes for surge and S protection applications, in compact chip package O-214 (SM) size format. The Transient Voltage Suppressor series offers a choice of Working Peak Reverse Voltage from 5 V up to 17 V and reakdown Voltage up to 2 V. Typical fast response times are less than 1. ns for unidirectional devices and less than 5. ns for bidirectional devices from V to Minimum reakdown Voltage. ourns hip iodes conform to J standards, are easy to handle with standard pick and place equipment and the flat configuration minimizes roll away. lectrical haracteristics (@ T = 25 Unless Otherwise Noted) Parameter Symbol Value Unit Minimum Peak Pulse Power issipation (T P = 1 ms) (Note 1,2) P PK 6 Watts Peak orward Surge urrent 8.3ms Single Half Sine Wave Superimposed on Rated Load I SM mps (Note 3) (J Method) Steady State Power issipation @ T L = 75 P M(V) 5. Watts Maximum Instantaneous orward Voltage @ I PP = 5 (or Unidirectional Units Only) V (Note 5) Volts Operating Temperature Range T J -55 to +15 Storage Temperature Range T STG -55 to +175 1. Non-repetitive current pulse, per Pulse Waveform graph and derated above T = 25 per Pulse erating urve. 2. Thermal Resistance Junction to Lead. 3. 8.3 ms Single Half-Sine Wave duty cycle = 4 pulses maximum per minute (unidirectional units only). 4. Single Phase, Half Wave, 6 Hz, resistive or inductive load. or capacitive load, derate current by 2 %. 5. V = 3.5 V on 214-T5. through 214-T9 and V = 5. V on 214-T through 214-T17. Reliable lectronic Solutions sia-pacific: Tel: +886-2 2562-4117 ax: +886-2 2562-4116 urope: Tel: +41-41 768 5555 ax: +41-41 768 551 The mericas: Tel: +1-951 781-55 ax: +1-951 781-57 www.bourns.com How To Order ommon ode hip iode Package 214 = SM/O-214 214 = SM/O-214 214 = SM/O-214 Model T = Transient Voltage Suppressor Series Working Peak Reverse Voltage 5. = 5. V RWM (Volts) 17 = 17 V RWM (Volts) Suffix = 5 % Tolerance evice = idirectional evice* = 5 % Tolerance idirectional evice = 1 % Tolerance Unidirectional evice* Terminations L = % Sn (lead free) lank = Sn/Pb 214 - T 5. *RoHS irective 22/95/ Jan 27 23 including nnex
214 Transient Voltage Suppressor iode Series lectrical haracteristics (@T = 25 unless otherwise noted) Maximum Maximum Maximum Unidirectional evice idirectional evice Working Peak Reverse Reverse Reverse reakdown Voltage Reverse Leakage Voltage Surge Part Part Part Part V R (Volts) Voltage @ V RWM @IRSM urrent Number Marking Number Marking Min. Max. @ I T (m) V RWM (Volts) I R (u) V RSM (Volts) I RSM (mps) 214-T5.* K 214-T5.* 6.4 7.55 1 5. 8 9.6 62.5 214-T5. K 214-T5. 6.4 7.25 1 5. 8 9.2 65.2 214-T6.* K 214-T6.* 6.67 8.45 1 6. 8 11.4 52.6 214-T6. KG 214-T6. G 6.67 7.67 1 6. 8 1.3 58.3 214-T6.5* KH 214-T6.5* H 7.22 9.14 1 6.5 5 12.3 48.7 214-T6.5 KK 214-T6.5 K 7.22 8.3 1 6.5 5 11.2 53.6 214-T7.* KL 214-T7.* L 7.78 9.86 1 7. 2 13.3 45.1 214-T7. KM 214-T7. M 7.78 8.95 1 7. 2 12. 5. 214-T7.5* KN 214-T7.5* N 8.33 1.8 1. 7.5 14.3 42. 214-T7.5 KP 214-T7.5 P 8.33 9.58 1. 7.5 12.9 46.5 214-T8.* KQ 214-T8.* Q 8.89 11.3 1. 8. 5 15. 4. 214-T8. KR 214-T8. R 8.89 1.2 1. 8. 5 13.6 44.1 214-T8.5* KS 214-T8.5* S 9.44 11.9 1. 8.5 2 15.9 37.7 214-T8.5 KT 214-T8.5 T 9.44 1.8 1. 8.5 2 14.4 41.7 214-T9.* KU 214-T9.* U 1. 12.8 1. 9. 1 16.9 35.5 214-T9. KV 214-T9. V 1. 11.5 1. 9. 1 15.4 39. 214-T1* KW 214-T1* W 11.1 14.1 1. 1 5. 18.8 31.9 214-T1 KX 214-T1 X 11.1 12.8 1. 1 5. 17. 35.3 214-T11* KY 214-T11* Y 12.2 15.4 1. 11 5. 2.1 29.9 214-T11 KZ 214-T11 Z 12.2 14.4 1. 11 5. 18.2 33. 214-T12* L 214-T12* 13.3 16.9 1. 12 5. 22. 27.3 214-T12 L 214-T12 13.3 15.3 1. 12 5. 19.9 3.2 214-T13* L 214-T13* 14.4 18.2 1. 13 5. 23.8 25.2 214-T13 LG 214-T13 G 14.4 16.5 1. 13 5. 21.5 27.9 214-T14* LH 214-T14* H 15.6 19.8 1. 14 5. 25.8 23.3 214-T14 LK 214-T14 K 15.6 17.9 1. 14 5. 23.2 25.8 214-T15* LL 214-T15* L 16.7 21.1 1. 15 5. 26.9 22.3 214-T15 LM 214-T15 M 16.7 19.2 1. 15 5. 24.4 24. 214-T16* LN 214-T16* N 17.8 22.6 1. 16 5. 28.8 2.8 214-T16 LP 214-T16 P 17.8 2.5 1. 16 5. 26. 23.1 214-T17* LQ 214-T17* Q 18.9 23.9 1. 17 5. 3.5 19.7 214-T17 LR 214-T17 R 18.9 21.7 1. 17 5. 27.6 21.7 214-T18* LS 214-T18* S 2. 25.3 1. 18 5. 32.2 18.6 214-T18 LT 214-T18 T 2. 23.3 1. 18 5. 29.2 2.5 214-T2* LU 214-T2* U 22.2 28.1 1. 2 5. 35.8 16.7 214-T2 LV 214-T2 V 22.2 25.5 1. 2 5. 32.4 18.5 214-T22* LW 214-T22* W 24.4 3.9 1. 22 5. 39.4 15.2 214-T22 LX 214-T22 X 24.4 28. 1. 22 5. 35.5 16.9 214-T24* LY 214-T24* Y 26.7 33.8 1. 24 5. 43. 14. 214-T24 LZ 214-T24 Z 26.7 3.7 1. 24 5. 38.9 15.4 214-T26* M 214-T26* 28.9 36.8 1. 26 5. 46.6 12.4 214-T26 M 214-T26 28.9 32.2 1. 26 5. 42.1 14.2 214-T28* M 214-T28* 31.1 39.4 1. 28 5. 5. 12. 214-T28 MG 214-T28 G 31.1 35.8 1. 28 5. 45.4 13.2 214-T3* MH 214-T3* H 33.3 42.4 1. 3 5. 53.5 11.2 214-T3 MK 214-T3 K 33.3 38.3 1. 3 5. 48.4 12.4 214-T33* ML 214-T33* L 36.7 46.9 1. 33 5. 59. 1.2 214-T33 MM 214-T33 M 36.7 42.2 1. 33 5. 53.3 11.3 Notes: 1. Suffix denotes a 5 % tolerance device. 2. Suffix denotes a bidirectional device.* 4. No suffix denotes a 1 % tolerance unidirectional device.* 5. or bidirectional devices with a V R of 1 volts or less, the I R limit is double. 3. Suffix denotes a 5 % tolerance bidirectional device. 6. or unidirectional devices with a V max. of 3.5 V at an I of 35,.5 Sine Wave of 8.3 ms Pulse Width.
214 Transient Voltage Suppressor iode Series lectrical haracteristics (@T = 25 unless otherwise noted) Maximum Maximum Maximum Unidirectional evice idirectional evice Working Peak Reverse Reverse Reverse reakdown Voltage Reverse Leakage Voltage Surge Part Part Part Part V R (Volts) Voltage @ V RWM @IRSM urrent Number Marking Number Marking Min. Max. @ I T (m) V RWM (Volts) I R (u) V RSM (Volts) I RSM (mps) 214-T36* MN 214-T36* N 4 5.7 1. 36 5. 64.3 9.3 214-T36 MP 214-T36 P 4 46. 1. 36 5. 58.1 1.3 214-T4* MQ 214-T4* Q 44.4 56.3 1. 4 5. 71.4 8.4 214-T4 MR 214-T4 R 44.4 51.1 1. 4 5. 64.5 9.3 214-T43* MS 214-T43* S 47.8 6.5 1. 43 5. 76.7 7.8 214-T43 MT 214-T43 T 47.8 54.9 1. 43 5. 69.4 8.6 214-T45* MU 214-T45* U 5 63.3 1. 45 5. 8.3 7.5 214-T45 MV 214-T45 V 5 57.5 1. 45 5. 72.7 8.3 214-T48* MW 214-T48* W 53.3 67.5 1. 48 5. 85.5 7. 214-T48 MX 214-T48 X 53.3 61.3 1. 48 5. 77.4 7.7 214-T51* MY 214-T51* Y 56.7 71.8 1. 51 5. 91.1 6.6 214-T51 MZ 214-T51 Z 56.7 65.2 1. 51 5. 82.4 7.3 214-T54* N 214-T54* 6 76. 1. 54 5. 96.3 6.2 214-T54 N 214-T54 6 69 1. 54 5. 87.1 6.9 214-T58* N 214-T58* 64.4 81.6 1. 58 5. 13 5.8 214-T58 NG 214-T58 G 64.4 74.6 1. 58 5. 93.6 6.4 214-T6* NH 214-T6* H 66.7 84.5 1. 6 5. 17 5.6 214-T6 NK 214-T6 K 66.7 76.7 1. 6 5. 96.8 6.2 214-T64* NL 214-T64* L 71.1 9.1 1. 64 5. 114 5.3 214-T64 NM 214-T64 M 71.1 81.8 1. 64 5. 13 5.8 214-T7* NN 214-T7* N 77.8 98.6 1. 7 5. 125 4.8 214-T7 NP 214-T7 P 77.8 89.5 1. 7 5. 113 5.3 214-T75* NQ 214-T75* Q 83.3 16 1. 75 5. 134 4.5 214-T75 NR 214-T75 R 83.3 95.8 1. 75 5. 121 4.9 214-T78* NS 214-T78* S 86.7 11 1. 78 5. 139 4.3 214-T78 NT 214-T78 T 86.7 99.7 1. 78 5. 126 4.7 214-T85* NU 214-T85* U 94.4 12 1. 85 5. 151 3.9 214-T85 NV 214-T85 V 94.4 19 1. 85 5. 137 4.4 214-T9* NW 214-T9* W 127 1. 9 5. 16 3.8 214-T9 NX 214-T9 X 116 1. 9 5. 146 4.1 214-T* NY 214-T* Y 111 141 1. 5. 179 3.4 214-T NZ 214-T Z 111 128 1. 5. 162 3.7 214-T11* P 214-T11* 122 154 1. 11 5. 196 3. 214-T11 P 214-T11 122 14 1. 11 5. 177 3.4 214-T12* P 214-T12* 133 169 1. 12 5. 214 2.8 214-T12 PG 214-T12 G 133 153 1. 12 5. 193 3.1 214-T13* PH 214-T13* H 144 182 1. 13 5. 231 2.6 214-T13 PK 214-T13 K 144 165 1. 13 5. 29 2.9 214-T15* PL 214-T15* L 167 212 1. 15 5. 268 2.2 214-T15 PM 214-T15 M 167 192 1. 15 5. 243 2.5 214-T16* PN 214-T16* N 178 226 1. 16 5. 287 2.1 214-T16 PP 214-T16 P 178 25 1. 16 5. 259 2.3 214-T17* PQ 214-T17* Q 189 239 1. 17 5. 34 2. 214-T17 PR 214-T17 R 189 218 1. 17 5. 275 2.2 Notes: 1. Suffix denotes a 5 % tolerance device. 4. No suffix denotes a 1 % tolerance unidirectional device.* 2. Suffix denotes a bidirectional device.* 5. or bidirectional devices with a V R of 1 volts or less, the I R limit is double. 3. Suffix denotes a 5 % tolerance bidirectional device. 6. or unidirectional devices with a V max. of 3.5 V at an I of 35,.5 Sine Wave of 8.3 ms Pulse Width.
214 Transient Voltage Suppressor iode Series Product imensions Recommended Pad Layout G H imension G H SM (O-214) 4.6-4.57 (.16 -.18) 3.3-3.94 (.13 -.155) 1.96-2.21 (.77 -.87).15 -.31 (.6 -.112) 5.21-5.59 (.25 -.22).5 -.2 (.2 -.8) 2.1-2.62 (.8 -.13).76-1.52 (.3 -.6) imension (Max.) (Min.) (Min.) Physical Specifications SM (O-214) 2.69 (.16) 2.1 (.83) 1.27 (.5) MM IMNSIONS: (INHS) ase..molded plastic per UL lass 94V- Polarity...athode band indicates unidirectional device No cathode band indicates bidirectional device Weight...3 ounces /.93 grams MM IMNSIONS: (INHS)
214 Transient Voltage Suppressor iode Series Rating and haracteristic urves Pulse erating urve Maximum Non-Repetitive Surge urrent Peak Pulse erating in Percent of Peak Power or urrent 75 5 25 Pulse Waveform I P, Peak Pulse urrent (%) 1 x Waveform as efined by R... 25 5 75 125 15 175 2 mbient Temperature ( ) 5 TR=1 µs Peak value (IRSM) Half value= IRSM 2 T=25 TP Pulse width (TP) is defined as that point where the peak current decays to 5 % of IPSM. 1 x waveform as defined by R... 1. 2. 3. 4. T, Time (ms) Peak orward Surge urrent (mps) 12 8 6 4 Pulse Width 8.3 ms 2 Single Half Sine-Wave (J Method) 1 2 5 1 2 5 Typical Junction apacitance apacitance (p) idirectional Number of ycles at 6 Hz Unidirectional T = 25 1 Standoff Voltage (Volts) Pulse Rating urve Steady State Power erating urve P P, Peak Power (KW) 1 1. 5. mm Lead reas T = 25 Non-repetitive Pulse Waveform Shown in Pulse Waveform Graph.1.1 µs 1. µs 1 µs µs 1. ms 1 ms TP, Pulse Width RM(V) Steady State Power issipation (W) 5. 4. 3. 2. 1. 6 Hz Resistive or Inductive Load. 25 5 75 125 15 175 2 TL, Lead Temperature ( )
214 Transient Voltage Suppressor iode Series Packaging Information The product will be dispensed in Tape and Reel format (see diagram below). P P 1 d Index Hole T 12 W 2 1 P Trailer evice Leader nd 1 pitches (min.) 1 pitches (min.) irection of eed Start MM IMNSIONS: (INHS) evices are packed in accordance with I standard RS-481- and specifications shown here. Item Symbol SM (O-214) arrier Width 4.94 ±.1 (.194 -.4) arrier Length 5.57 ±.1 (.21 -.4) arrier epth 2.36 ±.1 (.93 -.4) Sprocket Hole d 1.55 ±.5 (.61 -.2) Reel Outside iameter 33 (12.992) 5. Reel Inner iameter 1 MIN. (1.969) 13. ±.2 eed Hole iameter 2 (.512 -.8) Sprocket Hole Position 1.75 ±.1 (.69 -.4)) Punch Hole Position 5.5 ±.5 (.217 -.2) Punch Hole Pitch P 4. ±.1 (.157 -.4) 4. ±.1 Sprocket Hole Pitch P (.157 -.4) 2. ±.5 mbossment enter P 1 (.79 -.2) Overall Tape Thickness T.3 ±.1 (.12 -.4) Tape Width W 12. ±.2 (.472 -.8) 18.4 Reel Width W 1 MX. (.724) Quantity per Reel -- 3, W 1 RV. 4/6