Single Pole OptoMOS Relay Parameter Rating Units Blocking Voltage 6 V P Load Current 9 ma Max On-resistance Ω Features V rms Input/Output Isolation 6V P Blocking Voltage 1% Solid State Small 4-Pin Package Low Drive Power Requirements (TTL/CMOS Compatible Arc-Free With No Snubbing Circuits No EMI/RFI Generation Machine Insertable, Wave Solderable Applications Instrumentation Multiplexers Data Acquisition Electronic Switching I/O Subsystems Meters (Watt-Hour, Water, Gas Medical Equipment Patient/Equipment Isolation Security Aerospace Industrial Controls Description The G is a single-pole normally-open (1-Form-A Solid State Relay with an enhanced input to output isolation barrier of V rms. Clare s patented OptoMOS architecture makes available the optically coupled technology necessary to activate the output s efficient MOSFET switches. Control of the isolated output is accomplished by means of the highly effective GaAlAs infrared LED at the input. Approvals UL - File # E7627 EN/IEC 69-1 compliant Ordering Information Part Number G GV GR GRTR Pin Configuration Description 4-Pin DIP (1/Tube 4-Pin DIP V-Bend (1/Tube 4-Pin Surface Mount (1/Tube 4-Pin Surface Mount (1/Reel 1 + Control 4 Load 2 3 Control Load Switching Characteristics of Normally Open (Form A Devices CONTROL + I 9% LOAD 1% + T ON T OFF DS--R2 www.clare.com 1
Absolute Maximum Ratings Parameter Ratings Units Peak Blocking Voltage 6 V P Reverse Input Voltage V Input Control Current ma Peak (1ms 1 A Input Power Dissipation 1 1 mw Total Package Dissipation 2 mw Absolute Maximum Ratings are stress ratings. Stresses in excess of these ratings can cause permanent damage to the device. Functional operation of the device at conditions beyond those indicated in the operational sections of this data sheet is not implied. Isolation Voltage, Input to Output V rms Operational Temperature -4 to +8 ºC Storage Temperature -4 to +1 ºC 1 Derate Linearly 1.33 mw/ºc 2 Derate Linearly 3. mw/ºc Electrical absolute maximum ratings are at ºC Electrical Characteristics Parameters Conditions Symbol Min Typ Max Units Output Characteristics @ C Load Current Continuous - I L - - 9 Peak t=1ms I LPK - - 3 ma On-resistance 1 I L =9mA R ON - 3 Ω Off-State Leakage Current V L =6V I LEAK - - 1 μa Switching Speeds Turn-On =ma, V L =1V T ON - - Turn-Off T OFF - - ms Output Capacitance =ma, V L =V, f=1mhz C OUT - - pf Input Characteristics @ C Input Control Current I L =9mA -. 2 Input Dropout Current -.2 - - ma Input Voltage Drop =ma V F.9 1.2 1.4 V Reverse Input Current V R =V I R - - 1 μa Coon Characteristics @ C Input to Output Capacitance - C I/O - 3 - pf 1 Within 1 second of time. 2 www.clare.com R2
PERFORMANCE DATA* 3 Typical LED Forward Voltage Drop (N=, T A =ºC, =ma 3 Typical On-Resistance Distribution (N=, T A =ºC, I L =9mA DC 3 Typical Blocking Voltage Distribution (N=, T A =ºC 3 3 3 Device Count (N 2 1 Device Count (N 2 1 Device Count (N 2 1 1.17 1.19 1.21 1.23 1. LED Forward Voltage Drop (V 34.3 34.6 34.9 3.2 3. 3.8 36.1 On-resistance (Ω 777 782 787 792 797 82 87 Blocking Voltage (V P Typical for Switch Operation (N=, T A =ºC, I L =9mA DC Typical for Switch Dropout (N=, T A =ºC, I L =9mA DC Typical Turn-On Time (N=, T A =ºC, I L =9mA DC, =2mA Device Count (N 2 1 Device Count (N 2 1 Device Count (N 2 1.3.4..6.7.8.9 LED Current (ma.33.34.3.36.37.38.39 LED Current (ma.64.68.72.76.8.84.88 Turn-On (ms Device Count (N 3 3 2 1 Typical Turn-Off Time (N=, T A =ºC, I L =9mA DC, =2mA.22.24.26.28.3 Turn-Off (ms Load Current (ma Typical Load Current ( =2mA 1 9 8 7.4.3.3. 6 4 3 2 1.2..1. -4-2 2 4 6 8 1 12-4 Temperature (ºC Leakage (μa Typical Leakage (Measured Across Pins 3 & 4-2 2 4 6 8 1 Temperature (ºC Blocking Voltage (V P 9 9 8 8 7 7 6 6-4 Typical Blocking Voltage -2 2 4 6 8 1 Temperature (ºC Turn-On (ms. 4. 4. 3. 3. 2. 2. 1. 1.. -4 Typical Turn-On =7mA DC =ma =1mA -2 2 4 6 8 1 Temperature (ºC Turn-Off (ms 1..9.8.7.6..4.3.2.1-4 Typical Turn-Off =7mA DC, =ma -2 2 4 6 8 1 Temperature (ºC *The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact our application department. R2 www.clare.com 3
PERFORMANCE DATA* LED Forward Voltage Drop (V 1.8 1.6 1.4 1.2 1. Typical LED Forward Voltage Drop =ma =1mA =ma.8-4 -2 2 4 6 8 1 12 Temperature (ºC Turn-On (ms Typical Turn-On vs. LED Forward Current =9mA DC 2. 1.8 1.6 1.4 1.2 1..8.6.4.2 1 2 3 3 4 4 LED Forward Current (ma Turn-Off (ms Typical Turn-Off vs. LED Forward Current =9mA DC.7.6..4.3.2.1 1 2 3 3 4 4 LED Forward Current (ma Typical On-Resistance =ma DC, =2mA 7 3. Typical for Switch Operation =ma DC 3. Typical for Switch Dropout =ma DC 6 2. 2. On-resistance (Ω 4 3 2 LED Current (ma 2. 1. 1.. LED Current (ma 2. 1. 1.. 1-4 -2 2 4 6 8 1 Temperature (ºC. -4-2 2 4 6 8 1 Temperature (ºC. -4-2 2 4 6 8 1 Temperature (ºC Load Current (ma Typical Load Current vs. Load Voltage (T A =ºC, =2mA 9 6 3-3 -6-9 -3. -2. -1. 1. 2. 3. Load Voltage (V Load Current (A 1..9.8.7.6..4.3.2.1 1μs Energy Rating Curve 1μs 1ms 1ms 1ms 1s 1s 1s Time *The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact our application department. 4 www.clare.com R2
Manufacturing Information Soldering For proper assembly, the component must be processed in accordance with the current revision of IPC/JEDEC standard J-STD-2. Failure to follow the recoended guidelines may cause permanent damage to the device resulting in impaired performance and/or a reduced lifetime expectancy. Washing Clare does not recoend ultrasonic cleaning or the use of chlorinated solvents. MECHANICAL DIMENSIONS 4-Pin PDIP ( G Suffix.991 (.39 3.3 ±. (.13 ±.2.4 (.1 PC Board Pattern (Top View 6 -.8 DIA. (6 -.31 DIA. 2.4 ±.127 (.1 ±. 6.3 ±.127 (. ±. PIN #1 7.62 ±.127 (.3 ±. 4.72 ±.127 (.18 ±. 9º (ALL.47 ±.76 (.18 ±.3 1.61 (.6.8 2.4 ±.127 (.2 (.1 ±. 3.17 (.1 9º (ALL 9.144 ±.8 (.36 ±.2 7.62 ±.4 (.3 ±.1 6.3 ±.127 (. ±. (inches 4-Pin PDIP V Package.991 (.39.4 (.1 1.16 ±.8 (.4 ±.2 3.3 ±. (.13 ±.2 PC Board Pattern (Top View 6 -.8 DIA. (6 -.31 DIA. 2.4 ±.127 (.1 ±. 6.3 ±. (. ±.2 1.16 ±.127 (.4 ±. 4.72 ±. (.18 ±.2 9º (ALL.47 ±.76 (.18 ±.3 1.61 (.6 2.4 ±. (.1 ±.2 2.92 (.1.127 (. 9º (ALL 7.62 ±.4 (.3 ±.1 6.3 ±.127 (. ±. (inches R2 www.clare.com
MECHANICAL DIMENSIONS 4-Pin Surface Mount ( GR Suffix 2.4 ±.127 (.1 ±. 6.3 ±.127 (. ±. 9. (.37 3.3 ±. (.13 ±.2 7.62 ±.4 (.3 ±.1.63 ±.4 (. ±.1 Recoended PCB Land Pattern 2.287 (.9.9 (.37 8.8 (.346 9º ± 1º (ALL PIN #1.991 (.39 4.72 ±.127 (.18 ±..4 (.1 3.48 ±.76 (.137 ±.3 1.6 (.63 2.4 ±.127 (.1 ±. 2.287 ±.127 (.9 ±..12 min /.4 max (.4 min /.1 max (inches Tape and Reel Packaging for 4-Pin PDIP Low Profile Package 33.2 Dia (13. Dia Top Cover Tape Thickness.12 Max (.4 Max W = 16. (.63 K = 4.2 (.16 K 1 = 3.7 (.146 P = 12. (.472 A = 1.1 (.394 B =. (.197 Embossed Carrier (inches Embossment NOTE: Tape dimensions not shown comply with JEDEC Standard EIA-481-2 For additional information please visit our website at: www.clare.com Clare, Inc. makes no representations or warranties with respect to the accuracy or completeness of the contents of this publication and reserves the right to make changes to specifications and product descriptions at any time without notice. Neither circuit patent licenses nor indemnity are expressed or implied. Except as set forth in Clare s Standard Terms and Conditions of Sale, Clare, Inc. assumes no liability whatsoever, and disclaims any express or implied warranty, relating to its products including, but not limited to, the implied warranty of merchantability, fitness for a particular purpose, or infringement of any intellectual property right. The products described in this document are not designed, intended, authorized or warranted for use as components in systems intended for surgical implant into the body, or in other applications intended to support or sustain life, or where malfunction of Clare s product may result in direct physical harm, injury, or death to a person or severe property or environmental damage. Clare, Inc. reserves the right to discontinue or make changes to its products at any time without notice. 6 Specification: DS--R2 Copyright 27, Clare, Inc. All rights reserved. Printed in USA. 1/24/7