Help Manual of Single Window NOC Clearance For PMC Architect Console PUNE MUNICIPAL CORPORATION
Table of Contents 1. Introduction... 3 2. Architect Help -step by step... 3 2.1 Link from PMC Website... 3 2.2 Login Screen for Architect:... 4 3. Submission of Proposal to PMC... 7 3.1 Preapproval... 7 3.1.1 New Application... 8 3.1.2 Scrutiny Pending... 18 3.1.3 Scrutiny Done... 19 3.1.4 Rejected proposal... 19 3.1.5 Drawing verified... 20 jagdish.sonawane SoftTech Engr. Pvt. Ltd. Page 2
1. Introduction SWC (Single Window Clearance) is the combination of the approval process of internal NOC & building permission for approval of architectural plans. It is an application customized for efficient management and approval of the drawings. It helps in attaining standardization and hence transparency in the total process of building permission. The complete building approval management system will be a web based system where Architects submit the plans and proposal basic data on line. In built Customized workflow available for approval based on power delegation. The proposal will be finally approved or rejected after different levels of scrutiny. 2. Architect Help -step by step In this section Architect/LE/SE able to access website of PMC & get prepare to submit proposal online. 2.1 Link from PMC Website A. Direct Link: Architects/ LE can access the PMC online submission directly also from the given URL (http://203.153.37.242/bpams/pmc/subscriberlogin.aspx) B. From Pune Corporation Website Please go to corporation website in left hand menu you will find online services menu in that link are given for Building Sanctions / Registrations. By clicking on this you will directed to the login page of PMC SWC system. SoftTech Engr. Pvt. Ltd. Page 3
2.2 Login Screen for Architect: Please get login id and password from DCR Cell / Corporation, by filling providing Architect Registration Form. On this page there are a) Login b) Citizen Search c) Registration a) Citizen Search SoftTech Engr. Pvt. Ltd. Page 4
b) Registration For Registrations as Owner/Developer/Structural Engineers to PMC, here is online facility to register with PMC. Registration details will issued after submitting require document & fees the. View & Edit Details of Owner/Developer/Structural Engineers SoftTech Engr. Pvt. Ltd. Page 5
C. Login in console Enter the user name and password click on login. As architect logged in to system through valid user ID and password, architect will be entered in his console. Here Architect can view status page or Dash board of his proposals submitted to PMC SoftTech Engr. Pvt. Ltd. Page 6
online on basis of Proposal type. In that list appear on the selected option shown as Rejected, Pending and Approved cases. Link is provided on the file number for details. Architect Dashboard Architect can view all submitted proposal on this page & also know the status of proposal. Here proposals are sorted on the basis of type & status. 3. Submission of Proposal to PMC 3.1 Preapproval In Pune Corporation Architect should get preapproval of proposal before submitting MRTP & mandatory document of final proposal which helps in getting fast approval from PMC. In this Architect should provide Proposal drawing along with the some basic information. The Architect should fill the following details in Preapproval. A. Application Summary B. Application Details C. Owner Details D. Drawings E. Plot Details F. Building Details G. Area Details SoftTech Engr. Pvt. Ltd. Page 7
3.1.1 New Application Click On New Application at top of right hand side to create new proposal Following window will appear Enter the Project Name in Project title field. Select PreApproval from Permission Type SoftTech Engr. Pvt. Ltd. Page 8
After selecting Preapproval you can view Project Type, Case Type, Proposal Type Fill the details & click on create Application. Your application for new Proposal is creates Your application automatically store in Draft link in Preapproval section on dashboard page. ADCR number generated at the time of creating application keep this number in record for further reference. On this page architect can view summary & status of Application For Every New Created application architect need to fill all details in SoftTech Engr. Pvt. Ltd. Page 9
a) Application Details b) Owner Details c) Drawings d) Plot Details e) Building Details f) Area Details a) Application Details In this form architect should fill all mandatory details require for submission of proposal. In this form architect should fill Proposal details in case Information section and site details in Site Address And click on save button your information will save successfully after you getting message of data save Successfully b) Owner Details Fill all mandatory details of owners. And click on save button your information will save successfully after you getting message of data save Successfully SoftTech Engr. Pvt. Ltd. Page 10
c) Drawings The Drawing can be attached in this form or menu by using the select file in attachment section. After clicking on select file pop will open in that window select the file which you want to attach for submission. Note: This drawing should be in PreDCR format by using PreDCR software. After successful attachment file will listed here. SoftTech Engr. Pvt. Ltd. Page 11
d) Plot Details As architect clicking on plot detail following page will be appeared. There are four deferent parts in this form- Plot detail, Plot abutting detailed, Addition in net plot area. Fill all details require in - Plot detail, Plot abutting detailed, Addition in net plot area. Architect can see drop down button and with the help of drop down button architect can select area zone,location type,village,plot use,plot sub use After successful input, click on save button your information will save successfully after you getting message of data save Successfully SoftTech Engr. Pvt. Ltd. Page 12
SoftTech Engr. Pvt. Ltd. Page 13
e) Building Details Building Details Page: Architect needs to provide the number of building along with details with use/sub-use. Click on Building Details screen will appear (See below screen B1). Click on Add Building enter details of the building(s) being proposed.( See below Screen B2) After putting information click on save Button Building information will be save in tabular format (See below Screen B3). SoftTech Engr. Pvt. Ltd. Page 14
Screen B1 Screen B2 SoftTech Engr. Pvt. Ltd. Page 15
Screen B3 f) Area Details Here Architect need to give Area Details based on the number of plots, Click on Area Details on left hand side menu screen will appear (See below screen A1). Insert plot Name & select type from 7/12 & PRC Click on Extract table will appear insert area of plot in concern fields (See below A2). Screen A1 SoftTech Engr. Pvt. Ltd. Page 16
Screen A2 After putting information click in table please click on save Button for saving plot details. If want put another plot details please click on Add Plot and do same process as above for new plot. Final Submission of Proposal for Preapproval After filling all the details the Architect can send the proposal to the inward clerk by clicking on the Submit Application appears at the top of left-hand side menu. As clicking on submit option following message will be prompted for the information that is mandatory. If check box colour is red it shows some information is missing. Please fill this mandatory information If checkbox colour is black click on Proceed Button to submit application to Scrutiny cell.(see below screen F1). After successful submission system shows alert message (See below screen F2). Proposal is submitted to DCR cell it comes automatically in Scrutiny pending tab in PreApproval Dash board SoftTech Engr. Pvt. Ltd. Page 17
Screen F1 Screen F2 3.1.2 Scrutiny Pending After successful submission of proposal, it comes under this tab in dashboard /Home page. Proposal is in DCR console for auto scrutiny of drawing through AutoDCR software. After AutoDCR scrutiny proposal moves to Scrutiny done. SoftTech Engr. Pvt. Ltd. Page 18
3.1.3 Scrutiny Done Scrutiny done has shown the done cases which is approved by the officer. As clicking on the scrutiny done option approved case list will be opened. 3.1.4 Rejected proposal Architect can know his rejected proposal status through rejected proposal option. As clicking on the rejected proposal option, list will be appeared. SoftTech Engr. Pvt. Ltd. Page 19
3.1.5 Drawing verified Clicking on drawing verified option, architect can know the drawing status. When architect click on the drawing verified option following screen will be appeared. That will show the proposal number, architect can know the discretion and report of drawing after clicking file number. SoftTech Engr. Pvt. Ltd. Page 20