Product programme 2017 192256 Stainless steel worktops, lateral, back and front panels www.blanco-steelart.com BLANCO STEELART. Masterpieces in stainless steel. Exclusive and individual worktops from our high-tech manufactory.
Attractive prospects: stainless steel solutions at the highest level. BLANCO STEELART. Exclusive sinks and functional areas for every style of interior design. STEELART BLANCO Kitchen Technology s competence centre for stainless steel workmanship and advice. We take care of every detail for exclusive products associated with washing-up and food preparation. Thanks to our experience and passion in working with stainless steel, STEELART incorporates a high level of individual design in order that it can fulfil with certainty the specific wishes of discerning customers. The STEELART product ranges open up new design perspectives: with hand-crafted bowls and sink units, and custom-made stainless steel designs, you can achieve something out of the ordinary. After all, STEELART provides programme depth for more flexibility and functionality to suit. Thanks to a diverse range of high-class individual elements and matching details. We have compiled everything you need to know about custom-made STEELART stainless steel worktops on the following pages. You will find the range of exclusive STEELART bowls and sinks in the BLANCO catalogue or on our website at www.blanco-steelart.com. 2
CREATION Custom-made Designs Stainless steel BLANCO Durinox Worktops Stainless steel BLANCO Durinox 6-11 Specifications Weld-in bowls BLANCO ZEROX in BLANCO Durinox 12-13 Weld-in bowls BLANCO CLARON (R10) in stainless steel satin polish and satin matt 14-15 Back panels Stainless steel BLANCO Durinox 16 Stainless steel satin polish and satin matt Worktops Stainless steel satin polish and satin matt 18-23 Specifications Weld-in bowls and sinks BLANCO CLARON (R10) 24-27 Weld-in bowls and sinks BLANCO ZEROX (R0) 28-29 Weld-in sinks BLANCO DIVON II (R10) 30 Weld-in bowls BLANCO ANDANO (R22) 31 Weld-in bowls BLANCO SUPRA (R60) 32 Lateral panels Stainless steel satin polish and satin matt 34-35 Back and front panels Stainless steel satin polish and satin matt 36 Mixer Taps, Control Elements, Accessories Mixer taps and control elements 40-44 Accessories 45 Advice Cleaning and care 48-49 Technical information 50-51 Product data sheet for 12 und 13 mm worktops 52-53 form for stainless steel worktops 54 3
Harder. More elegant. More exclusive. The resistant Durinox surface by STEELART. Discover the unique material innovation from the STEELART high-tech manufactory: BLANCO Durinox. The new stainless steel surface offers a winning combination of real durability and a smooth, homogeneous matt surface effect. These unique characteristics make Durinox stainless steel worktops extremely scratchresistant. 4
BLANCO Durinox worktops, weld-in bowls and back panels The perfect combination: STEELART also offers BLANCO ZEROX weld-in bowls featuring the new stainless steel surface to match the Durinox worktop. 5
Stainless steel worktops R1 in BLANCO Durinox. WORKTOPS Durinox with edge radius R1 Unique material innovation: specially finished stainless steel surface in a velvety-matt look and with a homogeneous structure Highly resistant to scratches: more than twice as hard in comparison with conventional stainless steel surfaces Unbeatable planning freedom: Smooth version for any standard worktop size and freely planned weld-in elements In a perfectly matched finish with BLANCO ZEROX weld-in bowls Worktops BLANCO Durinox Stainless steel R1 Edge thickness 13 / 21 / 31 / 40 mm Edge thickness 50.5 / 59.5 mm Edge thickness 80 / 100 mm Stainless steel BLANCO Durinox with R1 Standard edge version R1 on one edge. Second, third, and fourth edges not processsed. Underside completely bonded with substrate (grey) coated on all sides and all-round edge band. On edge thicknesses of > 40 mm, the edge area is doubled. Max. length: 3700 mm. Other dimensions on request. Min. calculation base: 500 mm. BLANCO Durinox surface A13U* / A21U / A31U / A40U A50.5U / A59.5U A80U / A100U Stainless steel worktops R1 (price per running metre) up to 600 mm deep up to 650 mm deep up to 700 mm deep up to 800 mm deep up to 900 mm deep up to 1000 mm deep up to 1100 mm deep up to 1200 mm deep ES0501 ES0502 ES0503 ES0504 ES0505 ES0506 ES0507 ES0508 ES0509 ES0510 ES0511 ES0512 ES0513 ES0514 ES0515 ES0516 ES0517 ES0518 ES0519 ES0520 ES0521 ES0522 ES0523 ES0524 Edge specification Additional folding on each further visible edge ES0530 ES0530 ES0530 Your competent STEELART contact will be pleased to tell you more about the technical details and individual planning options. Further technical details see page 50 53. R1 edge design Planning information Please state which sides are visible. * The minimum worktop thickness is 13 mm. For more information on thin worktops see pages 50 53. If the given maximum lengths are exceeded, a screw connection must be included. See pages 7 and 50. * 13 mm worktops are made with an aluminium stabilising plate. 6
WORKTOPS Durinox with edge radius R1 Cut-outs and slopes Cut-out for inset hob or sink* Cut-out for flushmount built-in hob** Corner cut-out (only without edge finishing) Slope (without edge finishing) Sloped corner cut-out (only without edge finishing) Drill hole for tap up to Ø 36 mm EL0125 EL0124 EL0126 EL0127 EL0128 BLANCO Durinox worktops, weld-in bowls and back panels Connections 90 screw connection 45 screw connection SR0001 SR0002 Edge upstands per edge upstand Edge upstand*** Z40/22 Edge upstand*** C25-C40 Your competent STEELART contact will be pleased to tell you more about the technical details and individual planning options. Further technical details see page 50 53. * Please provide cut-out details. For hobs, please include the manufacturer's cut-out data sheet. ** Please include the manufacturer's cut-out data sheet. Must be checked when fitting in a 60-cm deep worktop. *** Edge upstands can only be carried out in DURINOX if they are attached to non-visible edges. Cut-outs and slopes Cut-out for inset hob or sink Corner cut-out (only without edge finishing) Slope (without edge finishing) Sloped corner cut-out (only without edge finishing) Connections 90 screw connection top view 90 screw connection bottom view 90 screw connection for 13 mm thin worktops top view 90 screw connection for 13 mm thin worktops bottom view Up-stands Edge folding Z40/22 C-edge folding 7
Beautifully shaped and elegant. The Durinox worktop with the exclusive chamfered edge design. An eye-catcher in any kitchen design: the unusual lines of the rounded worktop in the Durinox finish make it look extremely exciting and exclusive. The character of the thin worktop is also the result of the elegant chamfered edge design. The satin polish edge and bowl blend harmoniously with the velvety-matt stainless steel finish. 8
EDGE PROCESSING Durinox with chamfer Chamfered stainless steel worktops in BLANCO Durinox. Unique material innovation: specially finished stainless steel surface in a velvety-matt look and with a homogeneous structure Extremely resistant to scratches: more than twice as hard as conventional stainless steel surfaces Harmonious combination of velvety-matt Durinox finish and satin polish edge Elegant worktop, only 13 mm and 21 mm thin, in an exclusive chamfered edge design Worktop can also be rounded BLANCO Durinox worktops, weld-in bowls and back panels Worktops BLANCO Durinox with chamfer Edge processed with chamfer (price per linear metre) Surcharge on linear metre price worktop in R1 edge design (see page 6) Only possible on worktops 13 and 21 mm thick ES0670 Rounds Rounded corner with chamfer (satin polish edge finish) Curve with chamfer (satin polish edge finish) EL0143 EL0144 Your competent STEELART contact will be pleased to tell you more about the technical details and individual planning options. Further technical details see page 50 53. Chamfered finish Rounds thickness 13 mm* / 21 mm * 13 mm worktops are made with an aluminium stabilising plate. Rounded corner with radius R < 400 mm (with edge finishing) Curve with radius R > 400 mm (with edge finishing) 9
Sophisticated edge: solid, light, precise. WORKTOPS Durinox with SolidEdge The impressive SolidEdge stainless steel worktop in BLANCO Durinox boasts unique innovative features: The particularly robust stainless steel surface is extremely scratch-resistant It offers unbeatable freedom and safety during the planning stage: More stability on wider base units and hob cut-outs Worktops BLANCO Durinox Stainless steel SolidEdge Stainless steel BLANCO Durinox with SolidEdge Edge thickness 6 mm, slightly chamfered on one side. Second, third and fourth edges not processed. Underside completely bonded with substrate (grey) coated on all sides and all-round edge band (anthracite RAL 7015). Max. length: 3800 mm. Other dimensions on request. Min. calculation base: 500 mm. BLANCO Durinox surface. The surface of the 6 mm solid edge is finely brushed stainless steel (satin polish). SE12/25* SE12/35* SE20/25 SE20/35 SE30/25 SE30/35 Worktops stainless steel Durinox SolidEdge Overhang 25 mm (price per running metre) SE12/25* SE20/25 SE30/25 aluminium stabilising plate up to 600 mm deep up to 650 mm deep up to 700 mm deep up to 800 mm deep up to 900 mm deep up to 1000 mm deep up to 1100 mm deep up to 1200 mm deep ES0600 ES0601 ES0602 ES0603 ES0604 ES0605 ES0606 ES0607 ES0608 ES0609 ES0610 ES0611 ES0612 ES0613 ES0614 ES0615 ES0616 ES0617 ES0618 ES0619 ES0620 ES0621 ES0622 ES0623 Worktops stainless steel Durinox SolidEdge Overhang 35 mm (price per running metre) SE12/35* SE20/35 SE30/35 35 20 aluminium stabilising plate 6 up to 600 mm deep up to 650 mm deep up to 700 mm deep up to 800 mm deep up to 900 mm deep up to 1000 mm deep up to 1100 mm deep up to 1200 mm deep ES0640 ES0641 ES0642 ES0643 ES0644 ES0645 ES0646 ES0647 ES0648 ES0649 ES0650 ES0651 ES0652 ES0653 ES0654 ES0655 ES0656 ES0657 ES0658 ES0659 ES0660 ES0661 ES0662 ES0663 * Please observe the information on page 50 53. 10
WORKTOPS Durinox with SolidEdge Edge-version (price per running metre) additional edge specification SolidEdge overhang 25 mm for side / back edges additional edge specification SolidEdge overhang 35 mm for side / back edges ES0630 ES0631 BLANCO Durinox worktops, weld-in bowls and back panels Cut-outs and slopes Cut-out for inset hob or sink* Cut-out for flushmount built-in hob** Corner cut-out (without edge finishing) Slope (without edge finishing) Sloped corner cut-out (without edge finishing) Drill hole for tap up to Ø 36 mm EL0125 EL0124 EL0126 EL0127 EL0128 Connections 90 screw connection 45 screw connection SR0001 SR0002 Your competent STEELART contact will be pleased to tell you more about the technical details and individual planning options. For more technical information see page 50 53. * Please specify cut-out details. For hobs please include manufacturer s cut-out data specification. ** Please include the manufacturer's cut-out data sheet. Must be checked when fitting in a 60-cm deep worktop. Cut-outs and slopes Cut-out for inset hob or sink Corner cut-out (without edge finishing) Slope (without edge finishing) Sloped corner cut-out (without edge finishing) Connections 90 screw connection top view 90 screw connection bottom view 90 screw connection for 12 mm thin worktops top view 90 screw connection for 12 mm thin worktops bottom view Planning recommendation for worktops with SolidEdge Front-aligned specification: Planning recommendation for worktops with SolidEdge Fronts with integrated strip handles: Door front aluminium stabilising plate Base unit height base unit Door front aluminium stabilising plate Base unit height base unit Planning information Please indicate which sides are visible. If the indicated maximum lengths are exceeded, then a screw connection is to be included. See also page 50. The minimum worktop thickness is 12 mm. Information on thin worktops is given on pages 50 53. 11
WELD-IN BOWLS Durinox Weld-in bowls Durinox Bowl radius R0 Dimensions Scope of supply BLANCO ZEROX 180 in BLANCO Durinox Bowl 180 x 400 x 130 mm with 3½" InFino basket strainer and waste kit. separately (overview see page 44). BE0268 BLANCO ZEROX 340 in BLANCO Durinox Bowl 340 x 400 x 175 mm with 3½" InFino basket strainer and waste kit. separately (overview see page 44). BE0269 BLANCO ZEROX 400 in BLANCO Durinox Bowl 400 x 400 x 175 mm with 3½" InFino basket strainer and waste kit. BE0264 BLANCO ZEROX 450 in Bowl 450 x 400 x 175 mm with 3½" BLANCO Durinox InFino basket strainer and waste kit. BE0270 The bowls shown here are only available welded into a STEELART stainless steel worktop. The cut-out and the welding are included in the price. 12
SPECIFICATIONS Weld-in bowls Durinox Weld-in bowls Durinox bowl radius R0 Dimensions Scope of supply BLANCO ZEROX 500 in BLANCO Durinox Bowl 500 x 400 x 175 mm with 3½" InFino basket strainer and waste kit. BE0265 BLANCO Durinox worktops, weld-in bowls and back panels BLANCO ZEROX 550 in 550 Bowl 550 x 400 x 175 mm with 3½" BLANCO Durinox InFino basket strainer and waste kit. BE0271* 400 min.40 85 BLANCO ZEROX 700 in BLANCO Durinox Bowl 700 x 400 x 185 mm with 3½" InFino basket strainer and waste kit. BE0272 Planning recommendation In combination with BLANCO Durinox worktops and weld-in bowls, we recommend stainless steel satin matt surfaces for mixer taps and control elements. Planning information * If planning a 550 bowl in a 60-cm base unit, the side walls will have to be cut out (see page 50). Minimum distance of the drill hole (middle) for mixer tap is 60 mm, when drilling directly behind the bowl overflow. The bowls shown here are only available welded into a STEELART stainless steel worktop. The cut-out and the welding are included in the price. 13
WELD-IN BOWLS Stainless steel satin polish and satin matt finish Weld-in bowls Bowl radius R10 Dimensions Scope of supply BLANCO CLARON 180 Bowl 180 x 400 x 130 mm with 3½" InFino basket strainer and waste kit. Choice of stainless steel satin polish or satin matt finish. separately (overview see page 44). BE0237 BLANCO CLARON 340 Bowl 340 x 400 x 190 mm with 3½" InFino basket strainer and waste kit. Choice of stainless steel satin polish or satin matt finish. separately (overview see page 44). BE0238 BLANCO CLARON 400 Bowl 400 x 400 x 190 mm with 3½" InFino basket strainer and waste kit. Choice of stainless steel satin polish or satin matt finish. separately (overview see page 44). BE0239 BLANCO CLARON 450 Bowl 450 x 400 x 190 mm with 3½" InFino basket strainer and waste kit. Choice of stainless steel satin polish or satin matt finish. separately (overview see page 44). BE0240 BLANCO CLARON 500 Bowl 500 x 400 x 190 mm with 3½" InFino basket strainer and waste kit. Choice of stainless steel satin polish or satin matt finish. separately (overview see page 44). BE0241 The bowls shown here are only available welded into a STEELART stainless steel worktop. The cut-out and the welding are included in the price. 14
SPECIFICATIONS Weld-in bowls stainless steel satin polish and satin matt finish Weld-in bowls Bowl radius R10 Dimensions Scope of supply BLANCO CLARON 550 550 Bowl 550 x 400 x 190 mm with 3½" InFino basket strainer and waste kit. Choice of stainless steel satin polish or satin matt finish. min.40 R10 400 85 BE0254* BLANCO Durinox worktops, weld-in bowls and back panels BLANCO CLARON 700 Bowl 700 x 400 x 190 mm with 3½" InFino basket strainer and waste kit. Choice of stainless steel satin polish or satin matt finish. BE0242 BLANCO CLARON 400-T Drainer 400 x 400 x 30 mm with C-overflow for drainage (not to close), including waste fitting and connection to one bowl to combine. Slope of drainer: 24 mm 30 mm. Choice of stainless steel satin polish or satin matt finish. BE0274 BLANCO CLARON 550-T Drainer 550 x 400 x 18 mm with 1½" InFino basket strainer (not to close), including waste fitting and connection to one bowl to combine. Slope of drainer: 10 mm 17 mm. Choice of stainless steel satin polish or satin matt finish. BE0243 BLANCO CLARON with the tap ledge lowered Bowl 457 x 432 x 175 mm with 3½" BE0263** InFino basket strainer and overflow imprint and 2 tap holes of 35 mm diameter, including manual waste and overflow fitting. Level of worktop to tap ledge: 35 mm Choice of stainless steel satin polish or satin matt finish. Recommended mixer tap: BLANCO ELOSCOPE-F II BLANCO CLARON XL 60 SteamerPlus Bowl 530 x 420 x 190 mm mm with 3½" InFino basket strainer and waste kit. Choice of stainless steel satin polish or satin matt finish. BE0275*** BLANCO CLARON 550 Steamer Edition R10 550 min.40 332 85 Bowl 550 x 332 x 190 mm with 3½" InFino basket strainer and waste kit. Choice of stainless steel satin polish or satin matt finish. BE0255* Planning information BLANCO CLARON bowls are available in either satin polish or satin matt. Minimum distance of the drill hole (middle) for mixer tap is 60 mm, when drilling directly behind the bowl overflow. * If planning a 550 bowl in a 60-cm base unit, the side walls will have to be cut out (see page 50). ** Due to the step height of 35 mm, a pop-up is not recommended. If required, please order the pop-up waste with a round knob (overview on page 44). *** Must be checked if being installed in a 60 cm deep worktop. The bowls shown here are only available welded into a STEELART stainless steel worktop. The cut-out and the welding are included in the price. 15
BACK PANELS Durinox Back panels in BLANCO Durinox Stainless steel BLANCO Durinox Back panel with sealing tape on top and bottom. Sides covered with stainless steel. Max. size: 3800 x 1200 mm. BLANCO Durinox surface R1 radius Back panel in BLANCO Durinox Minimum calculated amount per piece Price per square metre RW0201 Edge design Additional edging each additional visible edge (corners welded) RW0210 Cut-outs and slopes Corner cut-out (only without edge finishing) Centre cut-out (only without edge finishing) Cut-out for connections Slope (without edge finishing) RW0212 RW0213 RW0214 RW0215 Cut-outs and slopes Corner cut-out (only without edge finishing) Centre cut-out (only without edge finishing) Cut-out for connections Slope (without edge finishing) 16
One billion spheres for a unique surface. BLANCO Durinox worktops, weld-in bowls and back panels BLANCO Durinox : stainless steel has never been this resistant. BLANCO Durinox an innovation in stainless steel that impresses absolutely. Extremely hard and highly resistant to scratches. The Durinox stainless steel surfaces obtain these special characteristics in a new finishing process that is used in aerospace technology and has now been extensively developed by BLANCO. The material is shaped by being blasted with around a billion stainless steel spheres at a speed of slightly less than 300 km/h. This results in unique work surfaces that set new standards in looks and feel. 17
WORKTOPS Stainless steel satin polish and satin matt finish with edge radius R1 Innovative and unique BLANCO STEELART demonstrates its competence in stainless steel with the edge version, R1. The radius of just 1 mm is typical of the high standard of production and gives the worktop a clear, linear impression. Worktops stainless steel satin polish and satin matt finish with edge radius R1 Edge thickness 13 / 21 / 31 / 40 mm Edge thickness 50.5 / 59.5 mm Edge thickness 80 / 100 mm Stainless steel R1 Standard edge version R1 on one side. Second, third and fourth edges not processed. Underside completely bonded with substrate (grey) coated on all sides and all-round edge band. On edge thicknesses of > 40 mm, the edge area is doubled. Max. length: 3800 mm. Other dimensions on request. Min. calculation base: 500 mm. Choice of satin polish or satin matt. A13U* / A21U / A31U / A40U A50.5U / A59.5U A80U / A100U Worktops stainless steel R1 (price per running metre) up to 600 mm deep up to 650 mm deep up to 700 mm deep up to 800 mm deep up to 900 mm deep up to 1000 mm deep up to 1100 mm deep up to 1200 mm deep ES0100 ES0101 ES0102 ES0104 ES0105 ES0106 ES0107 ES0108 ES0109 ES0110 ES0111 ES0113 ES0114 ES0115 ES0116 ES0117 ES0118 ES0119 ES0120 ES0122 ES0123 ES0124 ES0125 ES0126 Edge specification Additional folding on each further visible edge ES0130 ES0130 ES0130 Your competent STEELART contact will be pleased to tell you more about the technical details and individual planning options. Further technical details see page 50 53. R1 edge design Planning information Please state which sides are visible. * The minimum worktop thickness is 13 mm. For more information on thin worktops see pages 50 53. If the given maximum lengths are exceeded, a screw connection must be included. See pages 21 and 50. * 13 mm worktops are made with an aluminium stabilising plate. 18
WORKTOPS Stainless steel satin polish and satin matt finish with edge radius R3 Stainless steel worktops satin polish and satin matt Worktops stainless steel satin polish and satin matt finish with edge radius R3 Edge thickness 13 / 21 / 31 / 40 mm Edge thickness 50.5 / 59.5 mm Edge thickness 80 / 100 mm Stainless steel R3 Standard rim version R3 on one edge. Second, third and fourth edges not processed. Underside completely bonded with substrate (grey) coated on all sides and all-round edge band. On edge thicknesses of > 40 mm, the edge area is doubled. Max. length: 3800 mm. Other dimensions on request. Min. calculation base: 500 mm. Choice of satin polish or satin matt. A13U* / A21U / A31U / A40U A50.5U / A59.5U A80U / A100U Worktops stainless steel (price per running metre) up to 600 mm deep up to 650 mm deep up to 700 mm deep up to 800 mm deep up to 900 mm deep up to 1000 mm deep up to 1100 mm deep up to 1200 mm deep ES0300 ES0301 ES0302 ES0304 ES0305 ES0306 ES0307 ES0308 ES0309 ES0310 ES0311 ES0313 ES0314 ES0315 ES0316 ES0317 ES0318 ES0319 ES0320 ES0322 ES0323 ES0324 ES0325 ES0326 Edge specification Additional folding on each further visible edge ES0330 ES0330 ES0330 Your competent STEELART contact will be pleased to tell you more about the technical details and individual planning options. Further technical details see page 50 53. R3 edge design Planning information Please state which sides are visible. * The minimum worktop thickness is 13 mm. For more information on thin worktops see pages 50 53. If the given maximum lengths are exceeded, a screw connection must be included. See pages 21 and 50. * 13 mm worktops are made with an aluminium stabilising plate. 19
EDGE SPECIFICATION Stainless steel satin polish and satin matt finish with chamfer Exclusive and distinctive The exclusive chamfered edge design adds a striking touch to the worktop. It is particularly elegant in combination with a 13-mm worktop. Stainless steel satin polish and satin matt finish with chamfer Edge specification chamfer (price per running metre) Additional charge on worktop price R1 per running metre (see page 18) Only available with the surface finishes stainless steel satin polish and satin matt. ES0170 Stainless steel chamfer recommended for edge thicknesses to 13 mm* / 21 mm recommended for edge thicknesses > 21-100 mm Your competent STEELART contact will be pleased to tell you more about the technical details and individual planning options. Further technical details see page 50 53. * 13 mm worktops are made with an aluminium stabilising plate. Calculation examples Chamfered stainless steel island worktop Stainless steel worktop : length 2,400 mm, depth 1,200 mm Quantity cut-out worktop incl. folding on 1 edge A40U ES0108 2.4 m additional folding on sides 2 + 3 + 4. ES0130 3 Chamfer additional charge per running metre ES0170 7.2 m Cut-out for lay-on element EL0125 1 Bowl BLANCO CLARON 500 BE0241 1 1 x drill hole for tap 1 Edge 1-4: A40U F3.5 20
WORKTOPS Stainless steel satin polish and satin matt finish Cut-outs and slopes Cut-out for inset hob or sink* Cut-out for flushmount built-in hob** Corner cut-out (without edge finishing) Slope (without edge finishing) Sloped corner cut-out (without edge finishing) Drill hole for tap up to Ø 36 mm Connections 90 screw connection 45 screw connection Curves Rounded corner (with edge finishing) Curve (with edge finishing) EL0125 EL0124 EL0126 EL0127 EL0128 SR0001 SR0002 EL0129 EL0132 Stainless steel worktops satin polish and satin matt Up-stands per piece Edge folding Z40/22, lateral sides closed Edge folding C25-C40 EL0133 EL0142 Profiled edges per worktop Profiled edge P8Z*** visually coordinated with ZEROX bowls with radius R0 Profiled edge P8C*** visually coordinated with CLARON bowls with radius R10 EL0136 EL0137 Your competent STEELART contact will be pleased to tell you more about the technical details and individual planning options. Further technical details see page 50 53. * Please provide cut-out details. For hobs, please include the manufacturer's cut-out data sheet. ** Please include the manufacturer's cut-out data sheet. Must be checked when fitting in a 60-cm deep worktop. *** Where the zone is limited (wet area), the minimum distance to the finished worktop edge is 40 mm (see also page 53). Cut-outs and slopes Curves Cut-out for inset hob or sink Corner cut-out (without edge finishing) Slope (without edge finishing) Sloped corner cut-out (without edge finishing) Rounded corner (with edge finishing) Curve (with edge finishing) Connections 90 screw connection top view 90 screw connection bottom view 90 screw connection for 13 mm thin worktops top view 90 screw connection for 13 mm thin worktops bottom view Profiled edges Up-stands Profiled edge P8Z Inner corner R = 0 mm Profiled edge P8C Inner corner R = 10 mm Edge upstand Z40/22 C-C-upstand 21
Sophisticated edge: solid, light, precise. The SolidEdge stainless steel worktop impresses with innovative technology for safe and simple kitchen planning. versatile planning: in a floating effect or as a lay-on planning safety: the perfect solution for any requirement increased stability on wider base units and hob cut-outs integration of all bowl and sink models WORKTOPS Stainless steel satin polish and satin matt finish with SolidEdge Worktops stainless steel satin polish and satin matt finish with SolidEdge Stainless steel SolidEdge Edge thickness 6 mm, slightly chamfered on one side. Second, third and fourth edges not processed. Underside completely bonded with substrate (grey) coated on all sides and all-round edge band (anthracite RAL 7015). Max. length: 3800 mm. Other dimensions and versions on request. Min. calculation base: 500 mm. Choice of satin polish or satin matt. SE12/25* SE12/35* SE20/25 SE20/35 SE30/25 SE30/35 Worktops stainless steel SolidEdge overhang 25 mm (price per running metre) SE12/25* SE20/25 SE30/25 aluminium stabilising plate up to 600 mm deep up to 650 mm deep up to 700 mm deep up to 800 mm deep up to 900 mm deep up to 1000 mm deep up to 1100 mm deep up to 1200 mm deep ES0400 ES0401 ES0402 ES0403 ES0404 ES0405 ES0406 ES0407 ES0408 ES0409 ES0410 ES0411 ES0412 ES0413 ES0414 ES0415 ES0416 ES0417 ES0418 ES0419 ES0420 ES0421 ES0422 ES0423 Worktops stainless steel SolidEdge overhang 35 mm (price per running metre) SE12/35* SE20/35 SE30/35 35 20 aluminium stabilising plate 6 up to 600 mm deep up to 650 mm deep up to 700 mm deep up to 800 mm deep up to 900 mm deep up to 1000 mm deep up to 1100 mm deep up to 1200 mm deep ES0440 ES0441 ES0442 ES0443 ES0444 ES0445 ES0446 ES0447 ES0448 ES0449 ES0450 ES0451 ES0452 ES0453 ES0454 ES0455 ES0456 ES0457 ES0458 ES0459 ES0460 ES0461 ES0462 ES0463 * Please observe the information on page 50 53. 22
WORKTOPS Stainless steel satin polish and satin matt finish with SolidEdge Edge-version (price per running metre) additional edge processing SolidEdge overhang 25 mm for side / back edges additional edge processing SolidEdge overhang 35 mm for side / back edges ES0430 ES0431 Cut-outs and slopes Cut-out for inset hob or sink* Cut-out for flushmount built-in hob** Corner cut-out (without edge finishing) Slope (without edge finishing) Sloped corner cut-out (without edge finishing) Drill hole for tap up to Ø 36 mm Connections 90 screw connection 45 screw connection EL0125 EL0124 EL0126 EL0127 EL0128 SR0001 SR0002 Stainless steel worktops satin polish and satin matt Your competent STEELART contact will be pleased to tell you more about the technical details and individual planning options. Further technical details see page 50 53. * Please specify cut-out details. For hobs please include manufacturer s cut-out data specification. ** Please include the manufacturer's cut-out data sheet. Must be checked when fitting in a 60-cm deep worktop. Cut-outs and slopes Cut-out for inset hob or sink Corner cut-out (without edge finishing) Slope (without edge finishing) Sloped corner cut-out (without edge finishing) Connections 90 screw connection top view 90 screw connection bottom view 90 screw connection for 12 mm thin worktops top view 90 screw connection for 12 mm thin worktops bottom view Planning recommendation for worktops with a front-aligned specification Planning recommendation for fronts with integrated strip handles Door front aluminium stabilising plate Base unit height base unit Door front aluminium stabilising plate Base unit height base unit Planning information Please indicate which sides are visible. If the indicated maximum lengths are exceeded, then a screw connection is to be included. See also page 50. The minimum worktop thickness is 12 mm. Information on thin worktops is given on pages 50 53. 23
SPECIFICATIONS Weld-in bowls stainless steel satin polish and satin matt finish Weld-in bowls Bowl radius R10 Dimensions Scope of supply BLANCO CLARON 180 Bowl 180 x 400 x 130 mm with 3½" InFino basket strainer and waste kit. BE0237 BLANCO CLARON 340 Bowl 340 x 400 x 190 mm with 3½" InFino basket strainer and waste kit. BE0238 BLANCO CLARON 400 Bowl 400 x 400 x 190 mm with 3½" InFino basket strainer and waste kit. BE0239 BLANCO CLARON 450 Bowl 450 x 400 x 190 mm with 3½" InFino basket strainer and waste kit. BE0240 BLANCO CLARON 500 Bowl 500 x 400 x 190 mm with 3½" InFino basket strainer and waste kit. BE0241 The bowls shown here are only available welded into a STEELART stainless steel worktop. The cut-out and the welding are included in the price. 24
SPECIFICATIONS Weld-in bowls stainless steel satin polish and satin matt finish Weld-in bowls Bowl radius R10 Dimensions Scope of supply BLANCO CLARON 550 550 Bowl 550 x 400 x 190 mm with 3½" InFino basket strainer and waste kit. R10 BE0254* 400 min.40 85 BLANCO CLARON 700 Bowl 700 x 400 x 190 mm with 3½" InFino basket strainer and waste kit. BE0242 BLANCO CLARON 400-T Drainer 400 x 400 x 30 mm with C-overflow for drainage (does not close), including waste fitting and connection to one bowl to combine. Slope of drainer: 24 mm 30 mm. Choice of stainless steel satin polish or satin matt finish. BLANCO CLARON 550-T Drainer 550 x 400 x 18 mm with 1½" InFino basket strainer (not to close), incl. waste fitting. Slope of drainer: 10 mm - 17 mm. BE0274 BE0243 Specifications satin polish and satin matt BLANCO CLARON with the tap ledge lowered Bowl 457 x 432 x 175 mm with 3½" InFino basket strainer and overflow imprint and 2 tap holes of 35 mm diameter, including manual waste and overflow fitting. Level of worktop to tap ledge: 35 mm Recommended mixer tap: BLANCO ELOSCOPE-F II BE0263** BLANCO CLARON XL 60 SteamerPlus Bowl 530 x 420 x 190 mm with 3½" InFino basket strainer and waste kit. Choice of stainless steel satin polish or satin matt finish. BE0275*** BLANCO CLARON 550 Steamer Edition R10 550 Bowl 550 x 332 x 190 mm with 3½" InFino basket strainer and waste kit. BE0255* 332 min.40 85 Planning information BLANCO CLARON bowls are available in either satin polish or satin matt. Minimum distance of the drill hole (middle) for mixer tap is 60 mm, when drilling directly behind the bowl overflow. * If planning a 550 bowl in a 60-cm base unit, the side walls will have to be cut out (see page 50). ** Due to the step height of 35 mm, a pop-up is not recommended. If required, please order the pop-up waste with a round knob (overview on page 44). *** Must be checked if being installed in a 60 cm deep worktop. The bowls shown here are only available welded into a STEELART stainless steel worktop. The cut-out and the welding are included in the price. 25
SPECIFICATIONS Weld-in sinks stainless steel satin polish and satin matt finish Weld-in bowls Bowl radius R10 Dimensions Scope of supply BLANCO CLARON 180/395-T Bowl 180 x 400 x 130 mm with drainer, 3½" InFino basket strainer and waste kit. Available as a left- or right-hand version. BE0247* Slope of drainer: 13 mm - 20 mm. BLANCO CLARON 340/380-T Bowl 340 x 400 x 190 mm with drainer, 3½" InFino basket strainer and waste kit. Available as a left- or right-hand version. BE0248* Slope of drainer: 13 mm - 20 mm. BLANCO CLARON 450/490-T Bowl 450 x 400 x 190 mm with drainer, 3½" InFino basket strainer and waste kit. Available as a left- or right-hand version. BE0249* Slope of drainer: 13 mm - 20 mm. Planning information *For use in thin worktops, please observe the technical planning information (product data sheet see page 52/53). BLANCO CLARON sinks are available in either satin polish or satin matt. Minimum distance of the drill hole (middle) for mixer tap is 60 mm, when drilling directly behind the bowl overflow. Optional accessories for BLANCO CLARON 280 445 Stainless steel colander, suitable for all CLARON main and additional bowls 219 649 Cutting board, white satinised glass, stackable on colander 225 335 Stainless steel drainer, suitable for all CLARON main bowls 219 650 Cutting board, white satinised glass, stackable on drainer 225 333 Wooden chopping board, Walnut with stainless steel handle, to match bowls of CLARON 223 074 Cutting board, ash compound for CLARON XL 60 SteamerPlus 233 106 The bowls shown here are only available welded into a STEELART stainless steel worktop. The cut-out and the welding are included in the price. 26
SPECIFICATIONS Weld-in sinks stainless steel satin polish and satin matt finish Weld-in bowls Bowl radius R10 Dimensions Scope of supply BLANCO CLARON 400/T-FLOW one-sided BLANCO CLARON sink 400 x 400 x 190 mm with a smoothly tapering drainer on one side. 3½" InFino basket strainer and waste kit. Available as a left- or right-hand version. BE0250* Slope of drainer: 0 mm - 10 mm. BLANCO CLARON 400/T-FLOW two-sided Slope of drainer: 0 mm - 10 mm. BLANCO CLARON sink 400 x 400 x 190 mm with a smoothly tapering drainer on both sides. 3½" InFino basket strainer and waste kit. BE0251* BLANCO CLARON 500/T-FLOW one-sided Slope of drainer: 0 mm - 10 mm. BLANCO CLARON sink 500 x 400 x 190 mm with a smoothly tapering drainer on one side. 3½" InFino basket strainer and waste kit. Available as a left- or right-hand version. BE0252* Specifications satin polish and satin matt BLANCO CLARON 500/T-FLOW two-sided BLANCO CLARON sink 500 x 400 x 190 mm with a smoothly tapering drainer on both sides. 3½" InFino basket strainer and waste kit. BE0253* Slope of drainer: 0 mm - 10 mm. Planning information *For use in thin worktops, please observe the technical planning information (product data sheet see page 52/53). Note the special dimensions of BLANCO CLARON T-FLOW. Please discuss the technical details and planning options with your competent STEELART contact. BLANCO CLARON T-FLOW sinks are available in either satin polish or satin matt. BLANCO CLARON T-FLOW sinks cannot be welded in BLANCO Durinox worktops. BLANCO CLARON T-FLOW sinks cannot be combined with standards BLANCO CLARON bowls. Optional accessories for BLANCO CLARON T-FLOW Stainless steel colander, suitable for all CLARON main and additional bowls 219 649 Cutting board, white satinised glass, stackable on colander 225 335 Stainless steel drainer, suitable for all CLARON main bowls 219 650 Cutting board, white satinised glass, stackable on drainer 225 333 The bowls shown here are only available welded into a STEELART stainless steel worktop. The cut-out and the welding are included in the price. 27
SPECIFICATIONS Weld-in bowls stainless steel satin polish and satin matt finish Weld-in bowls Bowl radius R0 Dimensions Scope of supply BLANCO ZEROX 180 Bowl 180 x 400 x 130 mm with 3½" InFino basket strainer and waste kit. BE0221 BLANCO ZEROX 340 Bowl 340 x 400 x 175 mm with 3½" InFino basket strainer and waste kit. BE0222 BLANCO ZEROX 400 Bowl 400 x 400 x 175 mm with 3½" InFino basket strainer and waste kit. BE0223 BLANCO ZEROX 450 Bowl 450 x 400 x 175 mm with 3½" InFino basket strainer and waste kit. BE0224 BLANCO ZEROX 500 Bowl 500 x 400 x 175 mm with 3½" InFino basket strainer and waste kit. BE0225 BLANCO ZEROX 550 550 Bowl 550 x 400 x 175 mm with 3½" InFino basket strainer and waste kit. BE0256** 400 min.40 85 BLANCO ZEROX 700 Bowl 700 x 400 x 185 mm with 3½" InFino basket strainer and waste kit. BE0229 The bowls shown here are only available welded into a STEELART stainless steel worktop. The cut-out and the welding are included in the price. 28
SPECIFICATIONS Weld-in bowls stainless steel satin polish and satin matt finish Weld-in bowls Bowl radius R0 Dimensions Scope of supply BLANCO ZEROX 180/395-T Bowl 180 x 400 x 130 mm with drainer, 3½" InFino basket strainer and waste kit. Available as a left- or right-hand version. BE0244* Slope of drainer: 13 mm - 20 mm. BLANCO ZEROX 340/380-T Bowl 340 x 400 x 175 mm with drainer, 3½" InFino basket strainer and waste kit. Available as a left- or right-hand version. BE0245* Slope of drainer: 13 mm - 20 mm. BLANCO ZEROX 450/490-T Bowl 450 x 400 x 175 mm with drainer, 3½" InFino basket strainer and waste kit. Available as a left- or right-hand version. BE0246* Specifications satin polish and satin matt Slope of drainer: 13 mm - 20 mm. Planning information * Please observe the technical information (product data sheet see page 52/53) when using in thin worktops to 21 mm inclusive. ** If planning a 550 bowl in a 60-cm base unit, the side walls will have to be cut out. (see page 50). BLANCO ZEROX bowls and sinks are available in either satin polish or satin matt. Minimum distance of the drill hole (middle) for mixer tap is 60 mm, when drilling directly behind the bowl overflow. The bowls shown here are only available welded into a STEELART stainless steel worktop. The cut-out and the welding are included in the price. 29
SPECIFICATIONS Weld-in sinks stainless steel satin polish and satin matt finish Weld-in sinks Bowl radius R10 Dimensions Scope of supply BLANCO DIVON II 45 S Bowl 368 x 370 x 195 mm with drainer, 3½" InFino basket strainer and waste kit. Available as a left- or right-hand version. SP0226* Slope of drainer: 9 mm - 14 mm. BLANCO DIVON II 5 S Bowl 450 x 370 x 195 mm with drainer, 3½" InFino basket strainer and waste kit. Available as a left- or right-hand version. SP0224* Slope of drainer: 9 mm - 14 mm. BLANCO DIVON II 6 S Bowls 350 x 370 x 195 mm and 170 x 370 x 135 mm with drainer, 3½" InFino basket strainer and waste kit. Available as a left- or right-hand version. SP0225* Slope of drainer: 9 mm - 14 mm. BLANCO DIVON II 8 Bowls 368 x 370 x 195 mm, 3½" InFino basket strainer and waste kit. Available as a left- or right-hand version. SP0227* BLANCO DIVON II 8 S Bowls 350 x 370 x 195 mm with drainer, 3½" InFino basket strainer and waste kit. Available as a left- or right-hand version. SP0228* Slope of drainer: 9 mm - 14 mm. Planning information * Please observe the technical information (product data sheet see page 52/53) when using in thin worktops to 21 mm inclusive. BLANCO DIVON II sinks are only available in a satin polish finish. Optional accessories for BLANCO DIVON II and BLANCO ANDANO BLANCO DIVON II Stainless steel colander to match DIVON additional and main bowls 231 396 BLANCO DIVON II glass chopping board silver, made of safety glass 230 970 BLANCO ANDANO Ash compound chopping board 230 700 BLANCO ANDANO glass cutting board 227 697 BLANCO ANDANO stainless steel colander 227 692 The bowls shown here are only available welded into a STEELART stainless steel worktop. The cut-out and the welding are included in the price. 30
SPECIFICATIONS Weld-in bowls stainless steel satin polish and satin matt finish Weld-in bowls Bowl radius R22 Dimensions Scope of supply BLANCO ANDANO 180 Bowl 180 x 400 x 130 mm with 3½" InFino basket strainer and overflow imprint. BE0259 The matching pop-up is not included in the scope of delivery. If required, please order the retrofit set with pop-up separately (overview see page 44). BLANCO ANDANO 340 Bowl 340 x 400 x 190 mm with 3½" InFino basket strainer and overflow imprint. BE0260 The matching pop-up is not included in the scope of delivery. If required, please order the retrofit set with pop-up separately (overview see page 44). BLANCO ANDANO 400 Bowl 400 x 400 x 190 mm with 3½" InFino basket strainer and overflow imprint. The matching pop-up is not included in the scope of delivery. If required, please order the retrofit set with pop-up separately (overview see page 44). BE0261 Specifications satin polish and satin matt BLANCO ANDANO 450 Bowl 450 x 400 x 190 mm with 3½" InFino basket strainer and overflow imprint. BE0266 The matching pop-up is not included in the scope of delivery. If required, please order the retrofit set with pop-up separately (overview see page 44). BLANCO ANDANO 500 Bowl 500 x 400 x 190 mm with 3½" InFino basket strainer and overflow imprint. BE0262 The matching pop-up is not included in the scope of delivery. If required, please order the retrofit set with pop-up separately (overview see page 44). BLANCO ANDANO 700 Bowl 700 x 400 x 190 mm with 3½" InFino basket strainer and overflow imprint. BE0267 The matching pop-up is not included in the scope of delivery. If required, please order the retrofit set with pop-up separately (overview see page 44). Planning information BLANCO ANDANO bowls are only available in a satin polish finish. The bowls shown here are only available welded into a STEELART stainless steel worktop. The cut-out and the welding are included in the price. 31
SPECIFICATIONS Weld-in bowls stainless steel Weld-in bowls Bowl radius R60 Dimensions Scope of supply BLANCO SUPRA 180 Bowl 180 x 340 x 130 mm with 3½" basket strainer and waste kit. BE0202 BLANCO SUPRA 340 Bowl 340 x 400 x 175 mm with 3½" basket strainer and waste kit. BE0209 BLANCO SUPRA 400 Bowl 400 x 400 x 175 mm with 3½" basket strainer and waste kit. BE0206 BLANCO SUPRA 450 Bowl 450 x 400 x 175 mm with 3½" basket strainer and waste kit. BE0207 BLANCO SUPRA 500 Bowl 500 x 400 x 175 mm with 3½" basket strainer and waste kit. BE0208 Planning information BLANCO SUPRA bowls are only available in a satin polish finish. Other BLANCO bowl and sink designs are available on request. Please contact your local STEELART partner. The bowls shown here are only available welded into a STEELART stainless steel worktop. The cut-out and the welding are included in the price. 32
Pure design. Impeccable contours. Exlusive stainless steel worktops. Specifications satin polish and satin matt 33
LATERAL PANELS Stainless steel satin polish and satin matt finish Trims in thicknesses Stainless steel lateral panel Panel in thickness 50 mm Panel in thickness 100 mm 12.5 / 21.5 / 31.5 / 40.5 mm Stainless steel lateral trims for island solutions Glued evenly over entire surface, inside at front and back of trim folded up to 15 mm and annex by 105 mm. No height adjustment. Stainless steel lateral panels for island solutions Glued evenly over entire surface, inside of panel covered to 105 mm at front and back. Choice of satin polish or satin matt. Panel for island solution reversible reversible reversible up to 500 mm deep up to 700 mm deep up to 900 mm deep up to 1100 mm deep up to 1300 mm deep EW045 EW046 EW047 EW048 EW049 EW070 EW071 EW072 EW073 EW074 EW080 EW081 EW082 EW083 EW084 Edge specification Chamfer (add. price per panel) EW142 EW142 EW140 EW140 EW141 EW141 Optional Stainless steel cover on complete inside of panel EW201 EW201 EW201 EW201 EW201 EW201 Further technical details see page 51. 34
LATERAL PANELS Stainless steel satin polish and satin matt finish Trims in thicknesses Stainless steel lateral panel Panel in thickness 50 mm Panel in thickness 100 mm 12.5 / 21.5 / 31.5 / 40.5 mm Stainless steel lateral trims for in-line and full-length cabinets Glued evenly over entire surface, inside at front of trim folded up to 15 mm and annex by 105 mm. No height adjustment. Stainless steel lateral panels for in-line and full-length cabinets Glued evenly over entire surface, inside of panel covered to 105 mm at front. Choice of satin polish or satin matt. Panel for in-line and full-length cabinets reversible right left right left up to 1000 mm deep up to 1200 mm deep up to 1400 mm deep up to 1600 mm deep up to 1800 mm deep up to 2000 mm deep up to 2200 mm deep up to 2400 mm deep EW090 EW091 EW092 EW093 EW094 EW095 EW096 EW097 EW001 EW002 EW003 EW004 EW005 EW006 EW007 EW008 EW009 EW010 EW011 EW012 EW013 EW014 EW015 EW016 EW017 EW018 EW019 EW020 EW021 EW022 EW023 EW024 EW025 EW026 EW027 EW028 EW029 EW030 EW031 EW032 Edge specification Chamfer (add. price per panel) EW152 EW152 EW150 EW150 EW151 EW151 Optional Stainless steel cover on complete inside of panel EW201 EW201 EW201 EW201 EW201 EW201 Further technical details see page 51. Stainless steel table with panel legs One-piece tables with welded panel legs are available on enquiry. T Lateral and back panels satin polish and satin matt 35
BACK PANELS Stainless steel satin polish and satin matt finish Stainless steel back panels Stainless steel Back panel with sealing tape on top and bottom. Sides covered with stainless steel. Max. size: 3800 x 1200 mm. Choice of satin polish or satin matt finish. Radius R1 Radius R3 Back panel stainless steel Minimum calculated amount per piece Price per square metre RW0103 RW0104 Edge design Additional edging each additional visible edge (corners welded) RW0110 RW0110 Cut-outs and slopes Corner cut-out (without edge finishing) Centre cut-out (without edge finishing) Cut-out for connections Slope (without edge finishing) Curve (with edge finishing) RW0126 RW0130 RW0135 RW0127 RW0132 RW0126 RW0130 RW0135 RW0127 RW0132 Cut-outs and slopes Corner cut-out (without edge finishing) Centre cut-out (without edge finishing) Cut-out for connections Slope (without edge finishing) Curve (with edge finishing) 36
Special things are created when a craft becomes art. Individual made-to-measure creations in stainless steel. Lateral and back panels satin polish and satin matt 37
The fascination of system design. Harmonious match in form and finish. 38
BLANCO STEELART system design control elements with tap, soap dispenser and pop-up to match the STEELART sink centre. They appeal for their continuous design and the unique surface match between the control elements and the characteristic STEELART stainless steel surfaces. The STEELART system accessory with a design-orientated lay-on drainer and large chopping board in high-quality walnut appeals for its innovative technology and elegant looks. Mixer taps, Control elements, Accessories 39
Control elements in STEELART system design BLANCOCULINA-S Duo System design with professional standards. CLARON system design Exclusive design mixer tap Separate control element to position freely Comfortable locking of the hose with a precise magnetic holder Spray in high-quality metal Perfectly matched to STEELART bowls, especially BLANCO CLARON and FLOW BLANCOCULINA-S Duo Stainless steel satin matt Stainless steel satin polish Chrome Mixer tap with spray BLANCOCULINA-S Duo High pressure Stainless steel satin matt 519 784 BLANCOCULINA-S Duo High pressure Stainless steel satin polish 519 783 BLANCOCULINA-S Duo High pressure Chrome 519 782 Soap dispenser BLANCO PIONA Stainless steel satin matt 515 992 BLANCO PIONA Stainless steel satin polish 515 991 BLANCO PIONA Chrome 517 667 You will find the matching pop-up on page 44. 40
BLANCO LINEE Clear. Uncompromising. Consistent. Control elements in STEELART system design CLARON system design Consistently clear shapes High spout, also available with high-quality metal pull-out spray Perfectly matched to STEELART bowls, especially BLANCO CLARON and FLOW BLANCO LINEE Stainless steel satin matt Stainless steel satin polish Chrome Mixer tap BLANCO LINEE High pressure Stainless steel satin matt 517 596 BLANCO LINEE High pressure Stainless steel satin polish 517 595 BLANCO LINEE High pressure Chrome 517 594 Mixer tap with spray BLANCO LINEE-S High pressure Stainless steel satin matt 517 593 BLANCO LINEE-S High pressure Stainless steel satin polish 517 592 BLANCO LINEE-S High pressure Chrome 517 591 Soap dispenser BLANCO PIONA Stainless steel satin matt 515 992 BLANCO PIONA Stainless steel satin polish 515 991 BLANCO PIONA Chrome 517 667 Mixer taps, Control elements, Accessories You will find the matching pop-up on page 44. 41
Control elements in the 10-mm radius look BLANCO LEVOS Perfect elegance CLARON system design Consistently elegant shapes High spout with high-quality pull-out spray Perfectly matched to STEELART bowls, especially BLANCO CLARON and FLOW BLANCO LEVOS Stainless steel satin matt Stainless steel satin polish Chrome Mixer tap with spray BLANCO LEVOS-S High pressure Stainless steel satin matt 514 919 BLANCO LEVOS-S High pressure Stainless steel satin polish 514 918 BLANCO LEVOS-S High pressure Chrome 514 917 Soap dispenser BLANCO LEVOS Stainless steel satin matt 517 587 BLANCO LEVOS Stainless steel satin polish 517 586 BLANCO LEVOS Chrome 517 585 You will find the matching pop-up on page 44. 42
BLANCO QUADRIS Consistently linear Control elements in the familiar ZEROX look ZEROX system design: Consistently linear shapes Steep spout, also available with high-quality pull-out spray Perfectly matched to STEELART bowls, especially BLANCO ZEROX BLANCO QUADRIS Stainless steel satin matt Stainless steel satin polish Chrome Mixer tap with spray BLANCO QUADRIS-S High pressure Stainless steel satin polish 514 608 BLANCO QUADRIS-S High pressure Stainless steel satin polish 514 607 BLANCO QUADRIS-S High pressure Chrome 514 606 Soap dispenser BLANCO QUADRIS Stainless steel satin matt 517 590 BLANCO QUADRIS Stainless steel satin polish 517 589 BLANCO QUADRIS Chrome 517 588 You will find the matching pop-up on page 44. Mixer taps, Control elements, Accessories 43
POP-UPS Model Stainless steel satin matt Stainless steel satin polish Chrome BLANCO QUADRIS Pop-up Pop-up Stainless steel satin matt 221 943 Pop-up Stainless steel satin polish 221 942 Pop-up Chrome 221 902 BLANCO LEVOS Pop-up Pop-up Stainless steel satin matt 221 941 Pop-up Stainless steel satin polish 221 940 Pop-up Chrome 221 901 Pop-up round Pop-up Stainless steel satin matt 222 118 Pop-up Stainless steel satin polish 222 115 Pop-up Chrome 221 339 Remote drain control Remote drain control Stainless steel 119 293 44
ACCESSORIES Accessories Stainless steel colander, suitable for all CLARON / ZEROX main and additional bowls 219 649 Cutting board, white satinised glass, stackable on colander suitable for all CLARON / ZEROX main and additional bowls 420 x 200 mm 225 335 Stainless steel drainer, suitable for all CLARON / ZEROX main bowls 219 650 Cutting board, white satinised glass, stackable on drainer suitable for all CLARON / ZEROX main bowls 420 x 240 mm 225 333 Lay-on drainer in stainless steel for all CLARON / ZEROX single and double bowls 223 067 280 445 Wooden chopping board Walnut with stainless steel handle, to match bowls of CLARON / ZEROX stackable on lay-on drainer 223 074 Cutting board, ash compound for CLARON XL 60 SteamerPlus 233 106 Set with wooden chopping board and lay-on drainer: 516 185 Mixer taps, Control elements, Accessories Bowl connection 2 x 3½" if using 2 bowls with 3½" basket strainers 225 088 Bowl connection 3 x 3½" or 2 x 3½" - 1 x 1½" if using 3 bowls with 3½" basket valves or 2 bowl with 3½" basket valve and 1 drainer with 1½" valve 225 089 Bowl connection 2 x 3½" or 1 x 3½" - 1 x 1½" if using 2 bowls with 3½" basket valves or 1 bowl with 3½" basket valve and 1 drainer with 1½" valve 225 087 45
Stainless steel work surfaces: the material, cleaning and care. BLANCO STEELART stainless steel worktops are manufactured from high-quality nickel-chromium steel. Stainless steel is the classic material and its material property means that it offers almost boundless design options. The seamless integration of sinks and additional functional elements creates the elegant impression that everything is cast in a single piece. The advantages at a glance: Exclusive, aesthetically appealing, timeless and easy to combine Hygienic surface Suitable for contact with food and resilient against common household acids and alkalis Anti-corrosive Easy to clean BLANCO STEELART offers stainless steel work surfaces in three different finishing qualities: BLANCO Durinox, satin polish and satin matt finish. The main differences relate to the use and maintenance characteristics, as well as to the degree of shine. Find out more on the following pages. 46
MATERIAL CHARACTERISTICS BLANCO Durinox The material characteristics: Unique material innovation: specially finished stainless steel surface in velvety-matt look with a homogenous structure Extremely scratch-resistant: more than twice as hard as conventional stainless steel surfaces STEELART stainless steel Satin Polish and Satin Matt satin polish surface satin matt surface The material characteristics: Satin polish stainless steel: maximum shine with a linear finish Satin matt stainless steel: matt finish Not scratch-resistant: every stainless steel surface shows signs of use, known as a "patina", over time. Regular maintenance, e.g. using BLANCO POLISH, makes the surface increasingly robust: scratches merge into the surface; the surface becomes less impervious to fingerprints. Thanks to its smoother texture, the finely brushed surface BLANCO STEELART Satin Polish is easier to clean and care for than the more roughly sand brushed surface BLANCO STEELART Satin Matt. Tips for everyday use: Under unfavourable conditions, objects which fall onto the work surface can damage the surface. Do not place excessively hot saucepans or pans directly on the worktop. Do not cut food directly on the worktop, in order to prevent deep scratch marks. We recommend our cutting boards which are available as optional extras for this purpose. Avoid sliding hard or sharp-edged objects (e.g. heavy cooking utensils) over the worktop. General cleaning and maintenance recommendations for STEELART stainless steel worktops: Avoid cleaning agents containing chloric and hydrochloric acid. Regularly remove dirt and limescale deposits. Avoid direct, prolonged contact with rusting iron objects (e.g. cast iron pans). Do not use steel wool, only sponges for stainless steel (soft side). 47 Advice and Service Technical information
Cleaning and Care. Stainless steel surfaces satin polish and satin matt. 1. Deep cleaning (for satin polish surface finishes) 2. Day-to-day cleaning: We recommend that you clean and care for your worktop every 1-2 weeks with BLANCO POLISH. BLANCO POLISH makes daily cleaning easier and removes heavy dirt and limescale deposits. It seals the surface (water repellent property) and removes slight signs of wear and tear (scratches). BLANCO POLISH: Removes scratches Removes rust, marks and stains Water just rolls off the surface after use Prevents finger prints and other marks and dirt from settling Leaves a satin matt shine Care kit for stainless steel worktops, consisting of: 1 x BLANCO microfibre cloth 1 x BLANCO POLISH 1 x VILEDA sponge scratchless : 118 009 A soft sponge or a damp cloth together with a normal cleaning agent are sufficient for daily cleaning. To remove limescale you may also use cleaning agents containing vinegar or lemon juice. BLANCO household tip: Clean with vinegar water (20% vinegar, 80% water) or with lemon juice dissolved in water. Special information Always clean in the direction of the grain and never in a circular motion because this can cause lasting changes to the structure of the surface. Intensive polishing of one point produces local changes to the degree of shine (especially with satin matt finish). Avoid cleaning agents containing chloric and hydrochloric acid. Regularly remove dirt and limescale deposits. Avoid direct, prolonged contact with rusting iron objects (e.g. cast iron pans). Do not use steel wool, only sponges for stainless steel (soft side). 48
Cleaning and Care. BLANCO Durinox stainless steel surfaces. 1. Deep cleaning We recommend deep-cleaning the worktop before using it for the first time, and after that every 3 4 weeks. 1. Apply a few drops of undiluted BLANCO Durinox Liquid to a soft sponge (e.g. the stainless steel sponge by VILEDA). BLANCO Durinox Liquid is a special deep cleaner. It removes serious dirt and limescale deposits, and makes daily cleaning easier. BLANCO Durinox Liquid: Loosens rust, marks and stains Makes it easier to remove fingerprints 2. Clean the worktop using circular movements and with pressure on the surface. BLANCO Durinox Liquid 250 ml bottle code 520 833 3. Then remove all traces of the cleaning product and loosened dirt from the stainless steel surface with a microfibre cloth and plenty of water. 4. Wipe the worktop dry with a clean cotton or microfibre cloth. BLANCO Durinox Care Set for Durinox stainless steel worktops, consisting of: 1 x microfibre cloth 1 x BLANCO Durinox Liquid 250 ml 1 x sponge, non-scratch 2. Daily cleaning code 520 836 All that is required for daily cleaning is a soft sponge or damp microfibre cloth. To remove limescale and light dirt, you can also use BLANCO Durinox Liquid or a vinegar or lemon cleaner. Special information Do not use any abrasive scouring products (e.g. scouring milk, scouring powder, BLANCO POLISH) to clean BLANCO Durinox stainless steel surfaces. 49 Advice and Service Technical information
TECHNICAL INFORMATION Stainless steel worktops Chamfer Different chamfering is recommended for edge thicknesses to 13 mm / 21 mm and edge thicknesses > 21 to 100 mm. 13 mm worktops are made with an aluminium stabilising plate Weld-in bowls 550 series BLANCO CLARON 550 + 550-T BLANCO ZEROX 550 If fitting a 550 model in a 60-cm wide base unit, the side walls will have to be cut out. If fitting a 550-T model in a 30-cm wide base unit, the side walls will have to be cut out, too. Screw connection 90 Worktops from 13 mm thickness 80 150 Minimum distance to welded items 80 mm. When two worktops abut with opposing grinding directions, this may create the effect of them having different surfaces. top view bottom view without aluminium stabilising plate Worktops from 21 to 100 mm thickness 80 80 top view bottom view Screw connection 45 Worktops from 13 mm thickness top view bottom view without aluminium stabilising plate Worktops from 21 to 100 mm thickness top view bottom view 50
TECHNICAL INFORMATION Stainless steel worktops and lateral panels Cut-out for inset hob or sink On worktops with SolidEdge edging, the minimum space to the cut-out increases at the front and side to 65 mm (25 mm overhang) or 75 mm (35 mm overhang). The recommended minimum worktop width is 650 mm. 50 50 The cut-out is based on the stainless steel, not on the core material. Please observe the manufacturer's instructions for installation. Lateral trims 12.5-40.5 mm for in-line and full-length cabinets for island solutions No height adjustment on lateral trims (12.5 40.5 mm). With height adjustment for uneven floors (+ 10 mm) for panels with 50 mm and 100 mm thickness. The panels are fitted on-site. We recommend sealing the underside with silicone. Other dimensions available on request. Lateral panels 50 mm The chamfer width of the panel is based on the chamfer width of the worktop (2.5 mm or 3.5 mm). Installation by screw attachment to on-site base units (no supporting function). Lateral panels 100 mm 51 Advice and Service Technical information