9
CONTENTS SAMET SAMET SOFT CLOSE DRAWER 11 NEW SMART BOX 12 NEW SMART BOX FEATURES 13 NEW SMART BOX 99MM HIGH DRAWERS 16 NEW SMART BOX 155MM HIGH DRAWERS 18 NEW SMART BOX 219MM HIGH DRAWERS 20 IN-BOX 22 IN-BOX 99MM HIGH DRAWERS 24 IN-BOX 155MM HIGH DRAWERS 26 IN-BOX 219MM HIGH DRAWERS 28 NEW SMART BOX INDUSTRIAL PACKS 30 NEW SMART BOX & IN-BOX DRAWER STABILIZER 32 NEW SMART BOX & IN-BOX ACCESSORIES & JIGS 34 NEW SMART BOX ASSEMBLY INSTRUCTIONS 37 IN-BOX ASSEMBLY INSTRUCTIONS 38 SMART SLIDE 39 SMART SLIDE FULL EXTENSION 40 SMART SLIDE FULL EXTENSION PUSH TO OPEN 42 SLIDEA 44 SLIDEA SINGLE EXTENSION DRAWER WITH LOCK 46 SLIDEA SINGLE EXTENSION DRAWER WITH PIN 48 SLIDEA SINGLE EXTENSION DRAWER WITH LOCK 50 SMART SLIDE DRAWER STABILIZER 52 SMART SLIDE ACCESSORIES 53 SAMET DRAWER JIGS 54 SAM BOX 58 SAM BOX 86MM 60 SAM BOX 118MM 62 SAM BOX 150MM 64 SAM BOX ACCESSORIES 66 SAM BOX DRAWER SOFT CLOSE MECHANISM 67 LOBEK EXPRO SOFT CLOSE DRAWER 68 EXPRO 105MM HIGH DRAWERS 69 EXPRO 185MM HIGH DRAWERS 70 EXPRO 225MM HIGH DRAWERS 71 DRAWER INSTALLATION INFORMATION 72 SAMET & LOBEK ROLLER RUNNERS 74
SAMET SOFT CLOSE DRAWER Samet - Europe s Finest For almost 40 years Samet have established themselves as one of the leading cabinet hardware manufacturers in Europe; in fact, Samet is one of the top five across the globe. Established in Turkey in 1973, Samet began by manufacturing furniture accessories. Today Samet manufactures more than 2400 products sold to a total of 90 countries across 5 continents. In Australia, Nessco has the exclusive distribution rights across the country. SAMET (08) 9333 4999 sales@nessco.com.au (03) 9706 8400 vicsales@nessco.com.au 11
SAMET NEW SMART BOX Introducing The New Smart Box The Smart Box Version 3 (V3) boasts an easy drawer locking system, requiring minimal effort in assembly and disassembly, greater stability due to increased rail profile strength and increased dynamic stability with drawers now available rated to 40kgs and 65kgs. The Smart Box V3 has been LGA quality certified and TSE approved, which are amongst the highest certifications in Europe. In 2010, the Smart Box V2 was awarded the MAKSDER award for Best Design in the category of Drawer Systems. 12 www.nessco.com.au
SAMET NEW SMART BOX FEATURES Smart Click Smart Click enables you to assemble the front panel in one single movement by simply pressing the red button on both sides. The front panel can be adjusted in four directions: up - down ± 2mm & left - right ± 1.5mm. Smart Fit Equipped with Smart Fit, you can easily release the Smart Box drawer with a single lift. No need for disassembling any screws or latches, just pull & lift. (08) 9333 4999 sales@nessco.com.au (03) 9706 8400 vicsales@nessco.com.au 13
SAMET NEW SMART BOX FEATURES 2 Greater Stability 1 Convenient Assembly 3 Even Quieter 7Reasons to buy the new and improved Smart Box design: ÎÎ Convenient Assembly due to the brake system now being located in the side of the drawer, making assembly easier and safer. ÎÎ Greater Stability due to the increased rail profile strength and a new synchronisation system allowing for greater control. ÎÎ Even quieter with an improved carrier system that allows the drawers to operate more smoothly and silently. ÎÎ Smoother Closing due to the soft close mechanism now being located on the drawer rail; the drawer will close slowly even if pushed fast. ÎÎ Improved Dynamic Loading Capacity. The drawers are now available in 40kg and 65kg dynamic loading capacity, meaning the drawers can carry more load than ever before. ÎÎ More Accessory Alternatives to add value to your space and storage. At Nessco we have a large range of accessories to suit all your requirements. ÎÎ Enhanced Safety through the improved rail and drawer-lock mechanism providing you peace of mind. 14 www.nessco.com.au
SAMET NEW SMART BOX FEATURES 6 More Accessory Alternatives 4 Smoother Closing 5 Improved Dynamic Loading Capacity 7 Enhanced Safety Lifetime Warranty The latest innovation Smart Box drawer systems manufactured by Samet are covered by a lifetime warranty that offers a full replacement guarantee on Smart Box drawer systems. In the unlikely event that you should experience any manufacturing quality issues with Smart Box drawer systems, you can rest assured that you will be covered by this lifetime warranty. The warranty covers the consumer for the replacement of faulty hardware only and does not cover the removal or installation costs of the defective product. Moreover, Samet does not cover consequential / incidental damages, incorrect installation, products exposed to loads in excess of specifications, used for purposes other than that for which they are intended, commercial usages such as hotels, restaurants etc. and vandalism. Samet will not be liable for any consequential or incidental damages resulting from or contributed to by the use, installation, performance or failure of products. (08) 9333 4999 sales@nessco.com.au (03) 9706 8400 vicsales@nessco.com.au 15
SAMET NEW SMART BOX 99MM HIGH DRAWERS Product Details 2 1 3 A See page 17 3 2 99mm High Drawers Soft closing system 40 and 65kg dynamic loading capacity ± 2mm up/down, ± 1.5mm right/left adjustable 68mm backboard height 270/300/350/400/450/500/550mm drawer length for 40kg 450/500/550/600/650mm drawer length for 65kg Smart Click: front panel toolless assembly/disassembly Smartfit easy toolless drawer removal and fitting Long service life 4 5 1 New Smart Box main package LOADING CAPACITY 40kg CODE NOMINAL SIZE PACKING SB127140211 270mm 1 Set SB127140221 300mm 1 Set SB127140231 350mm 1 Set SB127140241 400mm 1 Set SB127140251 450mm 1 Set SB127140261 500mm 1 Set SB127140271 550mm 1 Set New Smart Box main package LOADING CAPACITY 65kg CODE NOMINAL SIZE PACKING SB127142251 450mm 1 Set SB127142261 500mm 1 Set SB127142271 550mm 1 Set SB127142281 600mm 1 Set SB127142291 650mm 1 Set Front Connection Pieces CODE PRODUCT TYPE PACKING SB127904122 Zamac ø10 with dowels 500pcs MAIN PACKAGE INCLUDES: 1. New Smart Box Slide Right-Left 2. New Smart Box Sides Right-Left 3. Backboard Holder without Gallery Railing Right-Left 4. Front Connection Pieces Screw-On 5. Decorative Covers 16 www.nessco.com.au
SAMET NEW SMART BOX 99MM HIGH DRAWERS REQUIREMENT FOR CABINET PLACEMENT 17,5 Cabinet Internal Width Chipboard Back Dimensions Width=Cabinet Internal Width - 90 9 Chipboard Screw Ø3,5x16mm 99 32 51,5 For Ø10 Dowels Hole: Ø10x12 68 Chipboard Back Dimensions Thickness 16 or 18mm 16 Chipboard Screw Ø3,5x16mm 19 32 min. 32 min. 50 min. 52 13 Wooden Bottom Panel Width=Cabinet Internal Width - 81 Cabinet Internal Width - 35 CHIPBOARD BACK - DIMENSIONS / APPLICATION SLIDE SCREW LOCATION 1. Chipboard Base Dimensions 2. Chipboard Back Dimensions 68 CIW - 90 16 16-18 NS - 5 CIW CD= NS+3mm CD CIW NS Cabinet Depth Cabinet Internal Width Nominal Size CIW - 81 METAL BACKBOARD - APPLICATION CIW 16 MBW= CIW-29 CD= NS+3mm 3. Chipboard Base Dimensions NS - 15 4. Metal Back Panel without Gallery Railing Order Requirements: SB1279031*MBW To obtain your desired color please add one of the below-mentioned figures to the end of the seven-digit code. 1= White 3= Gray Calculation for 18mm thick side panels Example for cabinet width of 600mm Cabinet Internal Width= 564mm MBW= 564mm - 29mm= 535mm Order: sb12790311535 Color MBW Metal Back Panel without Gallery Railing CODE NOMINAL SIZE PACKING SB12790311235 300mm 25 Pcs SB12790311385 450mm 25 Pcs SB12790311435 500mm 25 Pcs SB12790311535 600mm 10 Pcs SB12790311735 800mm 10 Pcs SB12790311835 900mm 10 Pcs CD Cabinet Depth CIW Cabinet Internal Width NS Nominal Size MBW Metal Back Panel Width CIW - 81 *Special order of metal back panels can be made for drawers with wooden side panel thickness other than 18mm (08) 9333 4999 sales@nessco.com.au (03) 9706 8400 vicsales@nessco.com.au 17
SAMET NEW SMART BOX 155MM HIGH DRAWER Product Details 2 7 3 A See page 19 6 7 3 155mm High Drawers 2 Soft closing system 40 and 65kg dynamic loading capacity ± 2mm up/down, ± 1.5mm right/left adjustable 116mm backboard height 270/300/350/400/450/500/550mm drawer length for 40kg 450/500/550/600/650mm drawer length for 65kg Smart Click: front panel toolless assembly/disassembly Smartfit easy toolless drawer removal and fitting Long service life 4 5 1 New Smart Box main package LOADING CAPACITY 40kg CODE NOMINAL SIZE PACKING SB127140211 270mm 1 Set SB127140221 300mm 1 Set SB127140231 350mm 1 Set SB127140241 400mm 1 Set SB127140251 450mm 1 Set SB127140261 500mm 1 Set SB127140271 550mm 1 Set New Smart Box main package LOADING CAPACITY 65kg CODE NOMINAL SIZE PACKING SB127142251 450mm 1 Set SB127142261 500mm 1 Set SB127142271 550mm 1 Set SB127142281 600mm 1 Set SB127142291 650mm 1 Set Front Connection Pieces CODE PRODUCT TYPE PACKING SB127904122 Zamac ø10 with dowels 500pcs MAIN PACKAGE INCLUDES: 1. New Smart Box Slide Right-Left 2. New Smart Box Sides Right-Left 3. Backboard Holder with Gallery Railing Right-Left 4. Front Connection Pieces Screw-On 5. Decorative Covers 6. Gallery Rail 7. Steel Side Panel Back Connectors CODE PRODUCT TYPE COLOUR SB12791221 Single Gallery Railing White Gallery Rails - STD CODE NOMINAL SIZE COLOUR SB127901411 270mm White SB127901421 300mm White SB127901431 350mm White SB127901441 400mm White SB127901451 450mm White SB127901461 500mm White SB127901471 550mm White SB127901481 600mm White SB127901491 650mm White Plexy Side Panel H:48 CODE LENGTH PACKING COLOUR SB127901113 350mm 10 Set/Ctn White SB127901114 400mm 10 Set/Ctn White SB127901115 450mm 10 Set/Ctn White SB127901116 500mm 10 Set/Ctn White SB127901153 350mm 10 Set/Ctn Trans SB127901154 400mm 10 Set/Ctn Trans SB127901155 450mm 10 Set/Ctn Trans SB127901156 500mm 10 Set/Ctn Trans Gallery Rails Easy Mount Screw Fix CODE NOMINAL SIZE COLOUR SB1279018511 270mm White SB1279018521 300mm White SB1279018531 350mm White SB1279018541 400mm White SB1279018551 450mm White SB1279018561 500mm White SB1279018571 550mm White SB1279018581 600mm White SB1279018591 650mm White Steel Side Panel H:48 CODE LENGTH PACKING COLOUR SB127900913 350mm 10 Set/Ctn White SB127900914 400mm 10 Set/Ctn White SB127900915 450mm 10 Set/Ctn White SB127900916 500mm 10 Set/Ctn White SB127900917 550mm 10 Set/Ctn White SB127900918 600mm 10 Set/Ctn White SB127900919 650mm 10 Set/Ctn White Gallery Rails Easy Mount Dowel Fix CODE NOMINAL SIZE COLOUR SB1279018611 270mm White SB1279018621 300mm White SB1279018631 350mm White SB1279018641 400mm White SB1279018651 450mm White SB1279018661 500mm White SB1279018671 550mm White SB1279018681 600mm White SB1279018691 650mm White 18 www.nessco.com.au
SAMET NEW SMART BOX 155MM HIGH DRAWER REQUIREMENT FOR CABINET PLACEMENT 14,5 Cabinet Internal Width Cabinet Internal Width -29 Chipboard Back Dimensions Width=Cabinet Internal Width - 90 9 64 Hole: Ø10 Depth: 12 Chipboard Screw Ø3,5x16mm min. 106 155 32 For Ø10 Dowels Hole: Ø10x12 116 Chipboard Back Dimensions Thickness 16 or 18mm 64 27 51,5 16 Chipboard Screw Ø3,5x16mm 13 min. 32 min. 52 17,5 Wooden Bottom Panel Width=Cabinet Internal Width - 81 Cabinet Internal Width - 35 CHIPBOARD BACK - DIMENSIONS / APPLICATION SLIDE SCREW LOCATION 1. Chipboard Base Dimensions 2. Chipboard Back Dimensions 116 CIW - 90 16 16-18 NS - 5 CIW CD= NS+3mm CD CIW NS Cabinet Depth Cabinet Internal Width Nominal Size CIW - 81 METAL BACKBOARD - APPLICATION CIW 16 MBW= CIW-29 CD= NS+3mm 3. Chipboard Base Dimensions NS - 15 4. Metal Backboard Side Panel H:48 Order Requirements:SB1279032*MBW To obtain your desired color please add one of the below-mentioned figures to the end of the seven-digit code. 1= White 3= Gray Calculation for 18mm thick side panels Example for cabinet width of 600mm Cabinet Internal Width= 564mm MBW= 564mm - 29mm= 535mm Order: sb12790311535 Color MBW Metal Back Panel with Gallery Railing CODE NOMINAL SIZE PACKING SB12790321235 300mm 25 Pcs SB12790321385 450mm 25 Pcs SB12790321435 500mm 25 Pcs SB12790321535 600mm 10 Pcs SB12790321735 800mm 10 Pcs SB12790321835 900mm 10 Pcs CD Cabinet Depth CIW Cabinet Internal Width NS Nominal Size MBW Metal Back Panel Width CIW - 81 *Special order of metal back panels can be made for drawers with wooden side panel thickness other than 18mm (08) 9333 4999 sales@nessco.com.au (03) 9706 8400 vicsales@nessco.com.au 19
SAMET NEW SMART BOX 219MM HIGH DRAWERS Product Details 2 7 3 A See page 21 6 7 3 219mm High Drawers 2 Soft closing system 40 and 65kg dynamic loading capacity ± 2mm up/down, ± 1.5mm right/left adjustable 180mm backboard height 270/300/350/400/450/500/550mm drawer length for 40kg 450/500/550/600/650mm drawer length for 65kg Smart Click: front panel toolless assembly/disassembly Smartfit easy toolless drawer removal and fitting Long service life 4 5 1 New Smart Box main package LOADING CAPACITY 40kg CODE NOMINAL SIZE PACKING SB127140211 270mm 1 Set SB127140221 300mm 1 Set SB127140231 350mm 1 Set SB127140241 400mm 1 Set SB127140251 450mm 1 Set SB127140261 500mm 1 Set SB127140271 550mm 1 Set New Smart Box main package LOADING CAPACITY 65kg CODE NOMINAL SIZE PACKING SB127142251 450mm 1 Set SB127142261 500mm 1 Set SB127142271 550mm 1 Set SB127142281 600mm 1 Set SB127142291 650mm 1 Set Front Connection Pieces CODE PRODUCT TYPE PACKING SB127904122 Zamac ø10 with dowels 500pcs MAIN PACKAGE INCLUDES: 1. New Smart Box Slide Right-Left 2. New Smart Box Sides Right-Left 3. Backboard Holder with Gallery Railing Right-Left 4. Front Connection Pieces Screw-On 5. Decorative Covers 6. Gallery Rail 7. Steel Side Panel Back Connectors CODE PRODUCT TYPE COLOUR SB12791241 Single Gallery Railing White Plexy Side Panel H:112 CODE LENGTH PACKING COLOUR SB127901213 350mm 10 Set/Ctn White SB127901214 400mm 10 Set/Ctn White SB127901215 450mm 10 Set/Ctn White SB127901216 500mm 10 Set/Ctn White SB127901253 350mm 10 Set/Ctn Trans SB127901254 400mm 10 Set/Ctn Trans SB127901255 450mm 10 Set/Ctn Trans SB127901256 500mm 10 Set/Ctn Trans Steel Side Panel H:112 CODE LENGTH PACKING COLOUR SB127901013 350mm 10 Set/Ctn White SB127901014 400mm 10 Set/Ctn White SB127901015 450mm 10 Set/Ctn White SB127901016 500mm 10 Set/Ctn White SB127901017 550mm 10 Set/Ctn White SB127901018 600mm 10 Set/Ctn White SB127901019 650mm 10 Set/Ctn White Back Connectors CODE PRODUCT TYPE COLOUR SB12791231 Double Gallery Railing White Gallery Rails - STD CODE NOMINAL SIZE COLOUR SB127901411 270mm White SB127901421 300mm White SB127901431 350mm White SB127901441 400mm White SB127901451 450mm White SB127901461 500mm White SB127901471 550mm White SB127901481 600mm White SB127901491 650mm White Gallery Rails Easy Mount Screw Fix CODE NOMINAL COLOUR SIZE SB1279018511 270mm White SB1279018521 300mm White SB1279018531 350mm White SB1279018541 400mm White SB1279018551 450mm White SB1279018561 500mm White SB1279018571 550mm White SB1279018581 600mm White SB1279018591 650mm White Gallery Rails Easy Mount Dowel Fix CODE NOMINAL COLOUR SIZE SB1279018611 270mm White SB1279018621 300mm White SB1279018631 350mm White SB1279018641 400mm White SB1279018651 450mm White SB1279018661 500mm White SB1279018671 550mm White SB1279018681 600mm White SB1279018691 650mm White 20 www.nessco.com.au
SAMET NEW SMART BOX 219MM HIGH DRAWERS REQUIREMENT FOR CABINET PLACEMENT 14,5 Cabinet Internal Width Cabinet Internal Width -29 Chipboard Back Dimensions Width=Cabinet Internal Width - 90 9 Hole: Ø10 Depth: 12 128 Chipboard Screw Ø3,5x16mm 64 min. 170 219 180 32 51,5 For Ø10 Dowels Hole: Ø10x12 16 Chipboard Screw Ø3,5x16mm 64 27 min. 52 min. 32 13 17,5 CHIPBOARD BACK - DIMENSIONS / APPLICATION SLIDE SCREW LOCATION 1. Chipboard Base Dimensions 2. Chipboard Back Dimensions 180 CIW - 90 16-18 NS - 5 Wooden Bottom Panel Width=Cabinet Internal Width - 81 Cabinet Internal Width - 35 CIW 16 CD= NS+12mm CD Cabinet Depth CIW Cabinet Internal Width NS Nominal Size CIW - 81 METAL BACKBOARD - APPLICATION CIW 16 MBW= CIW-29 CD= NS + 12mm 3. Chipboard Base Dimensions NS - 15 4. Metal Backboard Side Panel H:112 Order Requirements: SB1279034*MBW To obtain your desired color please add one of the below-mentioned figures to the end of the seven-digit code. 1= White 3= Gray Calculation for 18mm thick side panels Example for cabinet width of 600mm Cabinet Internal Width= 564mm MBW= 564mm - 29mm= 535mm Order: sb12790311535 Color MBW Metal Back Panel with Gallery Railing CODE NOMINAL SIZE PACKING SB12790341235 300mm 25 Pcs SB12790341385 450mm 25 Pcs SB12790341435 500mm 25 Pcs SB12790341535 600mm 10 Pcs SB12790341735 800mm 10 Pcs SB12790341835 900mm 10 Pcs CD Cabinet Depth CIW Cabinet Internal Width NS Nominal Size MBW Metal Back Panel Width CIW - 81 *Special order of metal back panels can be made for drawers with wooden side panel thickness other than 18mm (08) 9333 4999 sales@nessco.com.au (03) 9706 8400 vicsales@nessco.com.au 21
SAMET IN-BOX Volume In-Box compliments the Smart Box family by allowing greater usability of inner drawers. Smart inner drawers allow easy organisation of your kitchen ingredients and offer greater use of space within your pantry. Experience the comfort of Smart inner boxes with full extension, optional depths, heavy load capacity, AIRBRAKE technology and separation units. 22 www.nessco.com.au
SAMET IN-BOX Composition Separation units allow you to make small spaces more efficient. Smart inner solutions allow you to simplify your pantry and drawer organisation using interchangeable internal dividers that are easy to mount and demount to suit your requirements. (08) 9333 4999 sales@nessco.com.au (03) 9706 8400 vicsales@nessco.com.au 23
SAMET IN-BOX 99MM HIGH DRAWERS Product Details 1 2 3 A See page 25 3 2 99mm High Drawers Soft closing system 40 and 65kg dynamic loading capacity White color 68mm backboard height 270/300/350/400/450/500/550mm drawer length for 40kg 450/500/550/600/650mm drawer length for 65kg Smart Click: front panel toolless assembly/disassembly Smartfit easy toolless drawer removal and fitting Long service life 4 6 4 5 1 4 New Smart Box main package LOADING CAPACITY 40kg CODE NOMINAL SIZE PACKING SB127140211 270mm 1 Set SB127140221 300mm 1 Set SB127140231 350mm 1 Set SB127140241 400mm 1 Set SB127140251 450mm 1 Set SB127140261 500mm 1 Set SB127140271 550mm 1 Set New Smart Box main package LOADING CAPACITY 65kg CODE NOMINAL SIZE PACKING SB127142251 450mm 1 Set SB127142261 500mm 1 Set SB127142271 550mm 1 Set SB127142281 600mm 1 Set SB127142291 650mm 1 Set MAIN PACKAGE INCLUDES: 1. In-Box Slide Right-Left 2. In-Box Side Right-Left 3. Backboard Holder without Gallery Railing Right-Left 4. Front Connection Pieces 5. Decorative Covers 6. In-Box Front Panel Front Panel CODE LENGTH PACKING COLOUR SB12791711069 1069mm 10 Set White Front Connectors CODE PRODUCT TYPE COLOUR SB12719164211 Without Gallery Railing White 24 www.nessco.com.au
SAMET IN-BOX 99MM HIGH DRAWERS REQUIREMENT FOR CABINET PLACEMENT Cabinet Internal Width Chipboard Back Dimensions Width=Cabinet Internal Width - 90 9 Chipboard Screw Ø3,5x16mm 99 68 32 19 min. 50 16 Chipboard Screw Ø3,5x16mm min. 52 min. 32 13 Wooden Bottom Panel Width=Cabinet Internal Width - 81 CHIPBOARD BACK - DIMENSIONS / APPLICATION SLIDE SCREW LOCATION 1. Chipboard Base Dimensions 2. Chipboard Back Dimensions 68 CIW - 90 CIW 16 16-18 CD= NS+12mm NS - 5 CD CIW NS Cabinet Depth Cabinet Internal Width Nominal Size CIW - 81 METAL BACKBOARD - APPLICATION CIW 16 MBW= CIW-29 CD= NS+12mm 3. Chipboard Base Dimensions NS - 15 4. Metal Back Panel without Gallery Railing Order Requirements: SB1279031*MBW To obtain your desired color please add one of the below-mentioned figures to the end of the seven-digit code. 1= White 3= Gray Calculation for 18mm thick side panels Example for cabinet width of 600mm Cabinet Internal Width= 564mm MBW= 564mm - 29mm= 535mm Order: sb12790311535 Color MBW Metal Back Panel without Gallery Railing CODE NOMINAL SIZE PACKING SB12790311235 300mm 25 Pcs SB12790311385 450mm 25 Pcs SB12790311435 500mm 25 Pcs SB12790311535 600mm 10 Pcs SB12790311735 800mm 10 Pcs SB12790311835 900mm 10 Pcs CD Cabinet Depth CIW Cabinet Internal Width NS Nominal Size MBW Metal Back Panel Width CIW - 81 *Special order of metal back panels can be made for drawers with wooden side panel thickness other than 18mm Calculation Method for Front Panel Dimensions: Cut Measurement = Cabinet Internal Width - 99 (08) 9333 4999 sales@nessco.com.au (03) 9706 8400 vicsales@nessco.com.au 25
SAMET IN-BOX 155MM HIGH DRAWERS Product Details 3 1 A See page 27 2 7 3 2 155mm High Drawers 8 Soft closing system 40 and 65kg dynamic loading capacity White color 116mm backboard height 270/300/350/400/450/500/550mm drawer length for 40kg 450/500/550/600/650mm drawer length for 65kg Smart Click: front panel toolless assembly/disassembly Smartfit easy toolless drawer removal and fitting Long service life 4 6 4 4 1 1 New Smart Box main package LOADING CAPACITY 40kg CODE NOMINAL SIZE PACKING SB127140211 270mm 1 Set SB127140221 300mm 1 Set SB127140231 350mm 1 Set SB127140241 400mm 1 Set SB127140251 450mm 1 Set SB127140261 500mm 1 Set SB127140271 550mm 1 Set New Smart Box main package LOADING CAPACITY 65kg CODE NOMINAL SIZE PACKING SB127142251 450mm 1 Set SB127142261 500mm 1 Set SB127142271 550mm 1 Set SB127142281 600mm 1 Set SB127142291 650mm 1 Set MAIN PACKAGE INCLUDES: 1. In-Box Slide Right-Left 2. In-Box Side Right-Left 3. Backboard Holder with Gallery Railing Right-Left 4. Front Connection Pieces Screw-On 5. Decorative Covers 6. In-Box Front Panel 7. Gallery Rail 8. Steel Side Panel Front Connectors CODE PRODUCT TYPE COLOUR SB1279164311 Single Gallery Railing White Gallery Rails - STD (must be used on In-Box) CODE NOMINAL SIZE COLOUR SB127901411 270mm White SB127901421 300mm White SB127901431 350mm White SB127901441 400mm White SB127901451 450mm White SB127901461 500mm White SB127901471 550mm White SB127901481 600mm White SB127901491 650mm White Back Connectors CODE PRODUCT TYPE COLOUR SB12791221 Single Gallery Railing White Plexy Side Panel H:48 CODE LENGTH PACKING COLOUR SB127901114 400mm 10 Set/ Ctn White SB127901115 450mm 10 Set/ Ctn White SB127901116 500mm 10 Set/ Ctn White SB127901154 400mm 10 Set/ Ctn Trans SB127901155 450mm 10 Set/ Ctn Trans SB127901156 500mm 10 Set/ Ctn Trans Front Panel CODE LENGTH PACKING COLOUR SB12791711069 1069mm 10 Set White Steel Side Panel H:48 CODE LENGTH PACKING COLOUR SB127900913 350mm 10 Set/Ctn White SB127900914 400mm 10 Set/Ctn White SB127900915 450mm 10 Set/Ctn White SB127900916 500mm 10 Set/Ctn White SB127900917 550mm 10 Set/Ctn White SB127900918 600mm 10 Set/Ctn White SB127900919 650mm 10 Set/Ctn White 26 www.nessco.com.au
SAMET IN-BOX 155MM HIGH DRAWERS REQUIREMENT FOR CABINET PLACEMENT Cabinet Internal Width -29 Chipboard Back Dimensions Width=Cabinet Internal Width - 90 9 Chipboard Screw Ø3,5x16mm min. 106 155 116 64 27 16 Chipboard Screw Ø3,5x16mm 13 min. 32 min. 52 Wooden Bottom Panel Width=Cabinet Internal Width - 81 CHIPBOARD BACK DIMENSIONS / APPLICATION SLIDE SCREW LOCATION 1. Chipboard Base Dimensions 2. Chipboard Back Dimensions 116 CIW - 90 16 16-18 NS - 3 CIW CD= NS+3mm CD CIW NS Cabinet Depth Cabinet Internal Width Nominal Size CIW - 81 METAL BACKBOARD - APPLICATION CIW 16 MBW= CIW-29 CD= NS+3mm 3. Chipboard Base Dimensions NS - 15 4. Metal Backboard Side Panel H:48 Order Requirements: SB1279032*MBW To obtain your desired color please add one of the below-mentioned figures to the end of the seven-digit code. 1= White 3= Gray Calculation for 18mm thick side panels Example for cabinet width of 600mm Cabinet Internal Width= 564mm MBW= 564mm - 29mm= 535mm Order: sb12790311535 Color MBW Metal Back Panel with Gallery Railing CODE NOMINAL SIZE PACKING SB12790321235 300mm 25 Pcs SB12790321385 450mm 25 Pcs SB12790321435 500mm 25 Pcs SB12790321535 600mm 10 Pcs SB12790321735 800mm 10 Pcs SB12790321835 900mm 10 Pcs CD Cabinet Depth CIW Cabinet Internal Width NS Nominal Size MBW Metal Back Panel Width CIW - 81 *Special order of metal back panels can be made for drawers with wooden side panel thickness other than 18mm Calculation Method for Front Panel Dimensions: Cut Measurement = Cabinet Internal Width - 99 (08) 9333 4999 sales@nessco.com.au (03) 9706 8400 vicsales@nessco.com.au 27
SAMET IN-BOX 219MM HIGH DRAWERS Product Details 3 1 A See page 29 2 8 3 2 219mm High Drawers 9 Soft closing system 40 and 65kg dynamic loading capacity White color 180mm backboard height 270/300/350/400/450/500/550mm drawer length for 40kg 450/500/550/600/650mm drawer length for 65kg Smart Click: front panel toolless assembly/disassembly Smartfit easy toolless drawer removal and fitting Long service life 4 6 4 7 4 5 1 New Smart Box main package LOADING CAPACITY 40kg CODE NOMINAL SIZE PACKING SB127140211 270mm 1 Set SB127140221 300mm 1 Set SB127140231 350mm 1 Set SB127140241 400mm 1 Set SB127140251 450mm 1 Set SB127140261 500mm 1 Set SB127140271 550mm 1 Set Front Panel CODE LENGTH PACKING COLOUR SB12791711069 1069mm 10 Set White New Smart Box main package LOADING CAPACITY 65kg CODE NOMINAL SIZE PACKING SB127142251 450mm 1 Set SB127142261 500mm 1 Set SB127142271 550mm 1 Set SB127142281 600mm 1 Set SB127142291 650mm 1 Set Top Gallery Railing Bar CODE LENGTH PACKING COLOUR SB12790471 1115mm 10 Set White MAIN PACKAGE INCLUDES: 1. In-Box Slide Right-Left 2. In-Box Side Right-Left 3. Backboard Holder with Gallery Railing Right-Left 4. Front Connection Pieces Screw-On 5. Decorative Covers 6. In-Box Front Panel 7. In-Box Front Rail 8. Gallery Rail 9. Steel Side Panel Front Connectors CODE PRODUCT TYPE COLOUR SB1279164411 Double Gallery Railing White Plexy Side Panel H:112 CODE LENGTH PACKING COLOUR SB127901213 350mm 10 Set/Ctn White SB127901214 400mm 10 Set/Ctn White SB127901215 450mm 10 Set/Ctn White SB127901216 500mm 10 Set/Ctn White SB127901253 350mm 10 Set/Ctn Trans SB127901254 400mm 10 Set/Ctn Trans SB127901255 450mm 10 Set/Ctn Trans SB127901256 500mm 10 Set/Ctn Trans Steel Side Panel H:112 CODE LENGTH PACKING COLOUR SB127901013 350mm 10 Set/Ctn White SB127901014 400mm 10 Set/Ctn White SB127901015 450mm 10 Set/Ctn White SB127901016 500mm 10 Set/Ctn White SB127901017 550mm 10 Set/Ctn White SB127901018 600mm 10 Set/Ctn White SB127901019 650mm 10 Set/Ctn White Gallery Rails - STD (must be used on In-Box) NOMINAL CODE COLOUR SIZE Gallery Rails Easy Mount Screw Fix NOMINAL CODE SIZE COLOUR Gallery Rails Easy Mount Dowel Fix NOMINAL CODE COLOUR SIZE SB127901411 270mm White SB1279018511 270mm White SB1279018611 270mm White SB127901421 300mm White SB1279018521 300mm White SB1279018621 300mm White Back Connectors SB127901431 350mm White SB127901441 400mm White SB1279018531 350mm White SB1279018541 400mm White SB1279018631 350mm White SB1279018641 400mm White CODE PRODUCT TYPE COLOUR SB127901451 450mm White SB1279018551 450mm White SB1279018651 450mm White SB12791231 Double Gallery Railing White SB127901461 500mm White SB1279018561 500mm White SB1279018661 500mm White SB127901471 550mm White SB1279018571 550mm White SB1279018671 550mm White SB127901481 600mm White SB1279018581 600mm White SB1279018681 600mm White SB127901491 650mm White SB1279018591 650mm White SB1279018691 650mm White 28 www.nessco.com.au
SAMET IN-BOX 219MM HIGH DRAWERS REQUIREMENT FOR CABINET PLACEMENT Cabinet Internal Width-29 Chipboard Back Dimensions Width=Cabinet Internal Width - 90 9 64 min. 170 219 180 Chipboard Screw Ø3,5x16mm 64 16 Chipboard Screw Ø3,5x16mm 13 27 min. 52 min. 32 Wooden Bottom Panel Width=Cabinet Internal Width - 81 CHIPBOARD BACK DIMENSIONS / APPLICATION SLIDE SCREW LOCATION 1. Chipboard Base Dimensions 2. Chipboard Back Dimensions 180 CIW - 90 16-18 NS - 3 CIW 16 CD= NS+12mm CD Cabinet Depth CIW Cabinet Internal Width NS Nominal Size CIW - 81 METAL BACKBOARD - APPLICATION CIW 16 MBW= CIW-29 CD= NS + 12mm 3. Chipboard Base Dimensions NS - 15 4. Metal Backboard Side Panel H:112 Order Requirements: SB1279034*MBW To obtain your desired color please add one of the below-mentioned figures to the end of the seven-digit code. 1= White 3= Gray Calculation for 18mm thick side panels Example for cabinet width of 600mm Cabinet Internal Width= 564mm MBW= 564mm - 29mm= 535mm Order: sb12790311535 Color MBW Metal Back Panel with Gallery Railing CODE NOMINAL SIZE PACKING SB12790341235 300mm 25 Pcs SB12790341385 450mm 25 Pcs SB12790341435 500mm 25 Pcs SB12790341535 600mm 10 Pcs SB12790341735 800mm 10 Pcs SB12790341835 900mm 10 Pcs CD Cabinet Depth CIW Cabinet Internal Width NS Nominal Size MBW Metal Back Panel Width CIW - 81 *Special order of metal back panels can be made for drawers with wooden side panel thickness other than 18mm Calculation Method for Front Panel Dimensions: Cut Measurement = Cabinet Internal Width - 99 Calculation Method for Front Panel Dimensions: Cut Measurement = Cabinet Internal Width - 53 (08) 9333 4999 sales@nessco.com.au (03) 9706 8400 vicsales@nessco.com.au 29
SAMET NEW SMART BOX INDUSTRIAL PACKS Product Details See page 21 Industrial Packs Improved soft closing system guarantees smooth running Dynamic load capacity: 40kg ± 2 mm vertical and ± 1,5 mm horizontal adjustment Finish: White Wooden backboard thickness option: 18 mm Drawer Length for 40 Kg: 400/450/500mm Smart-Click: Tool free assembly and removal of front panel Smart-Fit: Simple and tool free assembly, as well as removal of drawer The improved stability guarantees a long product durability New Smart Box Industrial Packs LOADING CAPACITY 40kg CODE DESCRIPTION NOMINAL SIZE HEIGHT 400STD 99x400 STD 40kg Industrial Smart Box Set (kit) 400mm 99mm 400MED 155x400 MED 40kg 1 Gallery Industrial Smart Box Set (kit) 400mm 155mm 400POT 219x400 POT 40kg 1 Gallery Industrial Smart Box Set (kit) 400mm 219mm 400POTI 219x400 POT 40kg 1 Gallery & Infill Industrial Smart Box Set (kit) 400mm 219mm 450STD 99x450 STD 40kg Industrial Smart Box Set (kit) 450mm 99mm 450MED 155x450 MED 40kg 1 Gallery Industrial Smart Box Set (kit) 450mm 155mm 450POT 219x450 POT 40kg 1 Gallery Industrial Smart Box Set (kit) 450mm 219mm 450POTI 219x450 POT 40kg 1 Gallery & Infill Industrial Smart Box Set (kit) 450mm 219mm 500STD 99x500 STD 40kg Industrial Smart Box Set (kit) 500mm 99mm 500MED 155x500 MED 40kg 1 Gallery Industrial Smart Box Set (kit) 500mm 155mm 500POT 219x500 POT 40kg 1 Gallery Industrial Smart Box Set (kit) 500mm 219mm 500POTI 219x500 POT 40kg 1 Gallery & Infill Industrial Smart Box Set (kit) 500mm 219mm MAIN PACKAGE INCLUDES: 1. New Smart Box Slide Left 2. New Smart Box Slide Right 3. Sides Left 4. Sides Right 5. Gallery Rails 6. Decorative Covers 7. Top Gallery Railing Holder 8. Bottom Gallery Railing Holder 9. Front Connection Pieces 10. Side Panels 11. Backboard Holder with Gallery Railing Left 12. Backboard Holder with Gallery Railing Right A. Metal Backboard 30 www.nessco.com.au
SAMET NEW SMART BOX INDUSTRIAL PACKS New Smart Box Drawer 1-2 New Smart Box Slide Right-Left 3-4 New Smart Box Side Right-Left 6 Decorative Cover x 2 Pcs. 9 Front Connection Pieces x 2 Pcs. 11-12 Without Gallery Railing Backboard Holder Right-Left New Smart Box Drawer with Single Gallery Railing 1-2 New Smart Box Slide Right-Left 3-4 New Smart Box Side Right-Left 5 Gallery Railing Bar x 1 Set 6 Decorative Cover x 2 Pcs. 7 Top Gallery Railing Holder x 2 Pcs. 9 Front Connection Pieces x 2 Pcs. 11-12 Single Gallery Railing Backboard Holder Right-Left New Smart Box Drawer with Double Gallery Railing 1-2 New Smart Box Slide Right-Left 3-4 New Smart Box Side Right-Left 5 Gallery Railing Bar x 2 Set 6 Decorative Cover x 2 Pcs. 7 Top Gallery Railing Holder x 2 Pcs. 8 Bottom Gallery Railing Holder x 2 Pcs. 9 Front Connection Pieces x 2 Pcs. 11-12 Double Gallery Railing Backboard Holder Right-Left New Smart Box Drawer Side Panel H:48 1-2 New Smart Box Slide Right-Left 3-4 New Smart Box Side Right-Left 5 Gallery Railing Bar x 1 Set 6 Decorative Cover x 2 Pcs. 7 Top Gallery Railing Holder x 2 Pcs. 9 Front Connection Pieces x 2 Pcs. 10 Side Panel H=48 x 1 Set 11-12 Single Gallery Railing Backboard Holder Right-Left New Smart Box Drawer Side Panel H:112 1-2 New Smart Box Slide Right-Left 3-4 New Smart Box Side Right-Left 5 Gallery Railing Bar x 1 Set 6 Decorative Cover x 2 Pcs. 7 Top Gallery Railing Holder x 2 Pcs. 9 Front Connection Pieces x 2 Pcs. 10 Side Panel H=112 x 1 Set 11-12 H: 112 Side Panel Backboard Holder Right-Left (08) 9333 4999 sales@nessco.com.au (03) 9706 8400 vicsales@nessco.com.au 31
NEW SMART BOX & IN-BOX DRAWER STABILIZER Product Details 1 Stabilizer 2 Front Panel 3 Wooden Floor Drawer Front Stabilizer Recommended for the application with cabinets of 600mm width or more. Used if the front panel of the drawer is a timber. Drawer Front Stabilizer CODE PACKING COLOUR SB12790461 250 pcs Grey FRONT PANEL HOLE DIMENSIONS WOODEN FLOOR HOLE DIMENSIONS Recommened fixing is to locate the mechanism in the middle of the front panel. Use Ø3.5mm diameter chipboard screw when fixing the mechanism 32 www.nessco.com.au
NEW SMART BOX & IN-BOX ACCESSORIES & JIGS Product Details Smart Distance Bracket SLIDE SCREW LOCATION Smart distance bracket is used for In-Box applications of Smart drawer slides. Ø6mm Euro Screw is recommended to be used as fixing screw. When calculating the drawer dimensions the thickness of the distance bracket should be considered as S=25mm. Smart Distance Bracket CODE ORIENTATION PACKING COLOUR SB12790763 Right 50 pcs Grey SB12790764 Left 50 pcs Grey Product Details The vertical and horizontal adjustments are made as shown; by assembling the front panel marking template to the drawer in the cabinet. Drawer Front Panel Marking Template This template provides direct application to mark the front panels of Smart Box drawers without any measurement. It can be used for drawers without, with single and with double gallery railing and side panel H: 48 and H: 112 models. Front panel can be horizontally and vertically adjusted on the template. Drawer Front Panel Marking Template CODE PACKING SB12799908 1 Set / Box, 10 Sets / Ctn (08) 9333 4999 sales@nessco.com.au (03) 9706 8400 vicsales@nessco.com.au 33
NEW SMART BOX & IN-BOX ACCESSORIES & JIGS Product Details Drawer Inside Dividing Systems Adjustable cross dividing and lateral dividers. Various color options. Easy to remove and position. IN-BOX SIDE PANEL H:48 IN-BOX SIDE PANEL H:112 1 2 Lateral Divider CODE HEIGHT PACKING COLOUR SA127901731 120mm 20 Pcs / Ctn White SA127901741 185mm 20 Pcs / Ctn White Adjustable Aluminium Cross Dividing Panel CODE HEIGHT LENGTH PACKING COLOUR SA127901810 116mm 1200mm 10 Pcs / Ctn White SA127901910 180mm 1200mm 10 Pcs / Ctn White 3 Aluminium Cross Dividing Panel CODE HEIGHT LENGTH PACKING COLOUR SA127901814 116mm 1200mm 10 Pcs / Ctn White SA127901914 180mm 1200mm 10 Pcs / Ctn White Cross Dividing Connector CODE HEIGHT PACKING COLOUR SA127901711 120mm 50 Pcs / Ctn White SA127901721 185mm 50 Pcs / Ctn White 34 www.nessco.com.au
NEW SMART BOX & IN-BOX ACCESSORIES & JIGS Product Details Bottle Holder Applicable with all drawers used with gallery railings. For bottles with a diameter of Ø30- Ø100mm. The usage is recommended for bottom gallery railings with double gallery railing drawers. 1 2 3 Bottle Holder CODE PACKING COLOUR SA127902011 20 Pcs/Box, 80 Pcs/Ctn White Adjustable Gallery Railing CODE LENGTH PACKING COLOUR SA1121981 1104mm 10 Pcs/ Ctn White Adapter for Gallery Railing CODE PACKING COLOUR SA1121991 50 Pcs/Box, 200 Pcs/Ctn White Product Details Sink Cabinet Set for 900 1200mm drawers. Various color options. Can be easily assembled. Sink Cabinet CODE LENGTH PACKING COLOUR SB1271231 900-1200mm 1 Set / Ctn White SB1271233 900-1200mm 1 Set / Ctn Grey *For sink cabinet with wire 500mm. Note: NS = 500mm (slide length) NS-3 ICW-81 (08) 9333 4999 sales@nessco.com.au (03) 9706 8400 vicsales@nessco.com.au 35
SAMET NEW SMART BOX ASSEMBLY INSTRUCTIONS New Smart Box Drawer Assembly & Mounting 1 2 3 4 5 Wooden Drawer Bottom Wooden Backboard Wooden Backboard Mounting Mounting of Front Connecting part 6 7 8 9 10 Front Panel Mounting Wooden Drawer Floor Mounting Decorative Cover Mounting Slide Mounting to Cabinet Drawer Mounting to Slide 11 12 Drawer Mounting to Slide Removal of the drawer from the runner 13 14 Removal of Front Panel *For front panel removal push the red button as indicated on the picture. Removal of Front Panel Click! Adjustment Mounting of wooden drawer base without using screws 1 2 Wooden drawer base is supported to the front panel The claws have to be mounted as shown on the picture. Adjusting mechanism If the lock slots shut down due to a failure; 1. Press the red button as shown on the picture 2. Turn the screw driver as shown on the picture 8 8 Mounting Gallery Railings 1 2 3 4 5 Mounting of Dowel Mounting of Gallery Railing Mounting of Gallery Railing Holders Mounting of Gallery Railing Mounting of Gallery Raling Decorative Cover Easy Installation Borders Group 1 2 3 4 5 Dowelled Type Mounting Screwed Type Mounting Mounting of Gallery Railing Mounting of Gallery Railing Mounting of Gallery Railing Ø10mm Ø2mm 36 www.nessco.com.au
SAMET IN-BOX ASSEMBLY INSTRUCTIONS In-Box Drawer Mounting & Fixing 1 2 3 4 5 Wooden Drawer Bottom Wooden Backboard Wooden Backboard Mounting Mounting of front connectors 6 7 8 9 10 Mounting of front connector group Wooden Drawer Floor Mounting Mounting of front panel stabilizer Mounting of Gallery Railing Holders Mounting of Gallery Railing 11 12 13 14 15 Mounting of Gallery Raling Decorative Cover Decorative Cover Mounting Cabinet Mounting of the Drawer to the Cabinet Click! Removing the Drawer In-Box Side Panel H:112 1 2 3 Side Panel Mounting Side Panel Mounting Crush the pcs as shown. (08) 9333 4999 sales@nessco.com.au (03) 9706 8400 vicsales@nessco.com.au 37
SAMET SMART SLIDE Traditional Aesthetics If you prefer wood sided drawers, Smart Slide is a perfect solution. Smart Slide complements the Smart range by offering the benefits of Airbrake technology with a heavy 30kg dynamic load capacity. The concealed nature of Smart Slide offers a traditional aesthetic look and feel for your kitchen and bathroom environments. 38 www.nessco.com.au
SAMET SMART SLIDE Contemporary Solutions Push to Open Smart Slide is the latest technology by Samet that offers a contemporary look and feel in your environment. With the Push to Open Smart Slide you can create sleek surfaces that bring natural elegance to your furniture. (08) 9333 4999 sales@nessco.com.au (03) 9706 8400 vicsales@nessco.com.au 39
SAMET SMART SLIDE FULL EXTENSION Product Details Full Extension Drawer Concealed, full extension wooden drawer slide Forward adjustment is enabled by screw-on Push Open mechanism Easy removal / fitting with Smart Lock With Smart Lock, Right/Left and Up/Down freehand adjustment 30kg dynamic load capacity Maximum 19mm wooden side application 250/300/350/400/450/500/600mm drawer length Long service life Smart Slide Drawer Slide (right-left) CODE NOMINAL SIZE PACKING SL12722221 250mm 6 Pcs SL12722222 300mm 6 Pcs SL12722223 350mm 6 Pcs SL12722224 400mm 6 Pcs SL12722225 450mm 6 Pcs SL12722226 500mm 6 Pcs SL12722227 550mm 6 Pcs SL12722228 600mm 6 Pcs Smart Lock (right-left) CODE ORIENTATION PACKING SL12790781 Right 100 Pcs SL12790782 Left 100 Pcs 40 www.nessco.com.au
SAMET SMART SLIDE FULL EXTENSION REQUIREMENT FOR CABINET PLACEMENT Cabinet Internal Width DIW=(ICW-45) ±0,5 min. 7 Ø3,5 Chipboard Screw or Ø6 Euro Screw *For 19mm, the formula (DIW = ICW 46mm) should be used while the horizontal adjustment kept in the internal position. *max.18 Ø6 7 10-12 11 23 min. 31,5 12 min. 41 DD=(NS-10) +0-2 NS CD=NS+min.3 SLIDE SCREW LOCATION 250-300mm 350-400mm 450-500 550-600mm CD Cabinet Depth CIW Cabinet Internal Width NS Nominal Size MBW Metal Back Panel Width (08) 9333 4999 sales@nessco.com.au (03) 9706 8400 vicsales@nessco.com.au 41
SAMET SMART SLIDE FULL EXTENSION PUSH TO OPEN Product Details Push Open Full Extension Drawer Concealed, single extension wooden drawer slide 3mm backward and forward adjustment is enabled by screw on Push Open mechanism Easy removal and mounting permitted by SmartLock The SmartLock System provides a ±1,5mm horizontal and +2mm upwards adjustment opportunity Dynamic load capacity: 30 Kg Maximum up to 19mm wooden side application Drawer Length alternatives: 250/300/350/400/450/500/550 /600mm Improved stability guarantees product durability Smart Slide Drawer Slide (right-left) CODE NOMINAL SIZE PACKING SL12722421 250mm 6 Pcs SL12722422 300mm 6 Pcs SL12722423 350mm 6 Pcs SL12722424 400mm 6 Pcs SL12722425 450mm 6 Pcs SL12722426 500mm 6 Pcs SL12722427 550mm 6 Pcs SL12722428 600mm 6 Pcs Smart Lock (right-left) CODE ORIENTATION PACKING SL12790781 Right 100 Pcs SL12790782 Left 100 Pcs 42 www.nessco.com.au
SAMET SMART SLIDE FULL EXTENSION PUSH TO OPEN REQUIREMENT FOR CABINET PLACEMENT Cabinet Internal Width DIW=(ICW-45) ±0,5 min. 7 *For 19mm, the formula (DIW = ICW 46mm) should be used while the horizontal adjustment kept in the internal position. Ø3,5 Chipboard Screw or Ø6 Euro Screw Ø6 *max.18 7 10-12 min. 31,5 11 12 min. 34 23 DD=(NS-10) +0-2 NS CD=NS+min.3 SLIDE SCREW LOCATION 250-300mm 350-400mm 450-500 550-600mm CD Cabinet Depth CIW Cabinet Internal Width NS Nominal Size MBW Metal Back Panel Width (08) 9333 4999 sales@nessco.com.au (03) 9706 8400 vicsales@nessco.com.au 43
SAMET SLIDEA A Lifetime of Elegance A very special drawer that has the finest details all taken into consideration by Samet - Slidea. The Slidea drawer system has an opening and closing service life of over 80,000 cycles. It also features a slim design and is durable and elegant. The oil brake and stable moving slide systems allow for longevity and ease of use. 44 www.nessco.com.au
SAMET SLIDEA Design, Quality & a Long Lifespan, Combined as One Push to Open Slidea offers the most contemporary look and feel for your environment. With Push to Open Slidea you can create sleek surfaces that bring natural elegance to your furniture. (08) 9333 4999 sales@nessco.com.au (03) 9706 8400 vicsales@nessco.com.au 45
SAMET SLIDEA SINGLE EXTENSION WITH LOCK Product Details Single Extension Drawer with Lock (16mm) Concealed, single extension wooden drawer slide Easy removal/fitting with clip system +2,5mm up adjustment option with clip system Max 16mm wooden side application 350/400/450/500mm drawer length Long service life Oil brake soft close Slidea Drawer Slide (right-left) CODE NOMINAL SIZE PACKING SL12722823 350mm 12 Pcs SL12722824 400mm 12 Pcs SL12722825 450mm 12 Pcs SL12722826 500mm 12 Pcs Slidea Lock (right-left) CODE ORIENTATION PACKING SL12790791 Right 100 Pcs SL12790792 Left 100 Pcs 46 www.nessco.com.au
SAMET SLIDEA SINGLE EXTENSION WITH LOCK REQUIREMENT FOR CABINET PLACEMENT CIW +1 DIW=(CIW-42) - 0 max.16 Ø3,5 Chipboard Screw or Ø6 Euro Screw Ø6 7 10-12 min. 25 11 min. 34 DD=NS-10 37 32 10 Ø6 2 NS CD=NS+min.5 SLIDE SCREW LOCATION 250mm 300-350-400mm 9 64 450mm 500mm min.34mm 550-600mm 37 32 96 96 64 CD Cabinet Depth CIW Cabinet Internal Width NS Nominal Size MBW Metal Back Panel Width (08) 9333 4999 sales@nessco.com.au (03) 9706 8400 vicsales@nessco.com.au 47
5 DRAWER SAMET SLIDEA SINGLE EXTENSION WITH PIN Product Details Single Extension Drawer with Pin (16mm) Concealed, single extension wooden drawer slide Easy removal/fitting with clip system +2,5mm up adjustment option with clip system Max 16mm wooden side application 360/385/410/435/460/485/510mm drawer length Long service life No lock needed Oil brake soft close Slidea Drawer Slide (right-left) CODE NOMINAL SIZE PACKING SL1272292360 360mm 12 Set SL1272292385 385mm 12 Set SL1272292410 410mm 12 Set SL1272292435 435mm 12 Set SL1272292460 460mm 12 Set SL1272292485 485mm 12 Set SL1272292510 510mm 12 Set DRAWER DIMENSIONS AA BB AA BB 9 12 6 Ø8 Ø6 10-12 11 Ø6 a b NOMINAL SIZE NS FITTING PINS A EXIT SAFETY B 360mm 275mm 255mm 385mm 285mm 265mm 410mm 300mm 280mm 435mm 310mm 290mm 460mm 335mm 315mm 485mm 350mm 330mm 10 510mm 360mm 340mm 7 48 www.nessco.com.au
SAMET SLIDEA SINGLE EXTENSION WITH PIN REQUIREMENT FOR CABINET PLACEMENT CIW +1 DIW=(CIW-42) - 0 max.16 Ø3,5 Chipboard Screw or Ø6 Euro Screw Ø6 7 10-12 min. 25 11 min. 34 DD=NS-10 37 32 10 Ø6 2 NS CD=NS+min.5 SLIDE SCREW LOCATION 260 mm 285-310-335 360-385-410 mm 435-460 mm 9 64 485-510 mm 535-560 mm 37 32 96 96 64 CD Cabinet Depth CIW Cabinet Internal Width NS Nominal Size MBW Metal Back Panel Width (08) 9333 4999 sales@nessco.com.au (03) 9706 8400 vicsales@nessco.com.au 49
SAMET SLIDEA PUSH-OPEN SINGLE EXTENSION WITH LOCK Product Details Push-Open Single Extension Drawer with Lock (16mm) Concealed, single extension wooden drawer slide Easy removal/fitting with clip system +2,5mm up adjustment option with clip system Max 16mm wooden side application 350/400/450/500mm drawer length Long service life Slidea Drawer Slide (right-left) CODE NOMINAL SIZE PACKING SL12723513 350mm 12 Pcs SL12723514 400mm 12 Pcs SL12723515 450mm 12 Pcs SL12723516 500mm 12 Pcs Slidea Lock (right-left) CODE ORIENTATION PACKING SL12790791 Right 100 Pcs SL12790792 Left 100 Pcs 50 www.nessco.com.au
SAMET SLIDEA PUSH-OPEN SINGLE EXTENSION WITH LOCK REQUIREMENT FOR CABINET PLACEMENT CIW +1 DIW=(CIW-42) - 0 max.16 Ø3,5 Chipboard Screw or Ø6 Euro Screw Ø6 7 10-12 min. 25 11 min. 34 DD=NS-10 37 32 10 Ø6 2 NS CD=NS+min.5 SLIDE SCREW LOCATION 250mm 300-350-400mm 9 64 450mm 500mm min.34mm 550-600mm 37 32 96 96 64 CD Cabinet Depth CIW Cabinet Internal Width NS Nominal Size MBW Metal Back Panel Width (08) 9333 4999 sales@nessco.com.au (03) 9706 8400 vicsales@nessco.com.au 51
SAMET SMART SLIDE DRAWER STABILIZER Product Details Gear Whell Fixing Part - Left Stabilizer Bar Fixing Part - Right Rack Left Gear Wheel Drawer Stabilizer For drawers with 900 1200mm dimensions additional stabilizers are recommended Rack Right RACK MOUNTING DIMENSIONS NS CD MIN 500 530 CD CIW NS DD NS Cabinet Depth Cabinet Internal Width Nominal Size Drawer Depth Nominal Size DIW=ICW-45 CD min=ns + 30mm Bar Length=ICW-63mm min 12 Drawer Stabilizer CODE NOMINAL SIZE PACKING COLOUR SA127901322 500mm 20 Sets Grey ASSEMBLING 1 2 3 4 According to the height of the drawer, Rack Mounting Connection holes (using the above-mentioned dimensions), have to be drilled on the right and left side of the cabinet. For this procedure the hand tamplet should be used. Racks are screwed to right and left sides of the cabinet The fixing body should be mounted based on the dimensions shown above by using a chip board screw (Ø3.5X25 ) Mount the gear wheel to the bar and place the drawer into the cabinet. 52 www.nessco.com.au
SAMET SMART SLIDE ACCESSORIES & JIGS Product Details Smart Distance Bracket SLIDE SCREW LOCATION Smart distance bracket is used for In-Box applications of Smart drawer slides Ø6mm Euro Screw is recommended to be used as fixing screw When calculating the drawer dimensions the thickness of the distance bracket should be considered as S=25mm Smart Distance Bracket CODE ORIENTATION PACKING COLOUR SB12790763 Right 50 pcs Grey SB12790764 Left 50 pcs Grey PREPARING A DRAWER SMART LOCK HOLE AXIS SMART LOCK (SMART SLIDE) Simply pull the latches and remove the drawer. The Smart Lock System permits easy horizontal and vertical adjustment of the Smart Slide drawers. (08) 9333 4999 sales@nessco.com.au (03) 9706 8400 vicsales@nessco.com.au 53
SAMET DRAWER JIGS Product Details Smart Drilling Jig Mark the slide s axis for screw positioning on the cabinet (see figure 1) Align the Smart Drill Jig according to the marked axis (see figure 2) The drilling jag has to be placed into the leading edge on the cabinet s inside wall. Then screwing holes with Ø2mm should be drilled. Euro screws require a Ø5mm diameter drill (see figure 3) Use the screw holes to mount the slide (see figure 4) Smart Drilling Jig CODE SCREW PACKING SB12799902 Chipboard 1 pcs SB12799904 Euro 1 pcs Figure 1 Figure 2 Figure 3 Figure 4 54 www.nessco.com.au
SAMET DRAWER JIGS Product Details Smart Lock Template To mount the Smart Slide lock (locking and adjustment mechanism) Ø2mm diameter assembly holes are required (see figure 1 and figure 2) To fix the runner to the drawer (back panel) clamp holes with a drill of Ø6mm are required (see figure 3) Attention: While drilling, place the assembly template on the drawer s relevant surface (see figure 1 and figure 3) Smart Lock Template CODE PACKING SB12799903 1 Pcs/Box, 10 Pcs/Crt Figure 1 Figure 2 b a 4 1 b a 2 4 Figure 3 * Slide back retaining hole. a b 3 4 b 2 4 a (08) 9333 4999 sales@nessco.com.au (03) 9706 8400 vicsales@nessco.com.au 55
SAMET DRAWER JIGS Smart Drilling Jig with Ruler The ruler allows to easily drill screw holes in both assembled and disassembled cabinets (See figure 1, 2 and 3) When drilling slide connection holes to assembled cabinets both inside and outside surface of the cabinet bottom can be used as the reference plane (See figure 2 and 3) The locking device allows the fixing of the drilling jig to the cabinet (see Detail C) By moving the template, the assembling of both the normal and inside drawers can be done. Moreover, an adjustability of up to 40mm is provided for inside Drawers (see Detail B) The drilling jig can be used for Smarbox, Smart Slide Single Extension, Smart Slide Full Extension, as well as Sambox drawer slides Assembling holes require a Ø2mm diameter drill Smart Drilling Jig with Ruler CODE SCREW PACKING SB12799901 Chipboard 1 set SB12799906 Euro 1 set SB12799910 Euro 1 set Figure 1 Figure 2 Disassembled Cabinets Assembled Cabinets Detail C Detail A Detail B Figure 3 Assembled Cabinets Sam Box Detail A Detail B Detail C Smart Slide Single Extension After adjusting the desired measures on the ruler, the position is fixed by screwing the hut (see figure 1) The adjustable template allows the assembling of both normal and inside Drawers. Scale needs to be on 0 position for normal drawers (see figure 1) The drilling jig is fixed by using the locking device as indicated by the arrows (see figure 2) Smart Slide Full Extension Smart Box 56 www.nessco.com.au
SAMET DRAWER (08) 9333 4999 sales@nessco.com.au (03) 9706 8400 vicsales@nessco.com.au 57
SAMET SAM BOX An Elegant & Simple Drawer for a Clean, Sleek Look Sam Box is the traditional drawer system released by Samet. Sam Box offers an economical yet aesthetically pleasing solution for your drawers. With varying heights and colours available plus a dynamic loading capacity of 25kg, Sam Box is well suited for use in kitchens, bathrooms and office furniture. 58 www.nessco.com.au
SAMET SAM BOX Practical Drawer Solutions Self-closing feature 3 different drawer side heights: 86, 118 and 150mm 250/300/350/400/450/500/550mm slide lengths Electrostatic paint; cream, black, white & metallic grey Durable steel runner with nylon rollers 25 kg. load capacity Safety pull-out stop system Horizontal and vertical front adjustment (08) 9333 4999 sales@nessco.com.au (03) 9706 8400 vicsales@nessco.com.au 59
SAMET SAM BOX 86MM Product Details Sam Box 86mm Aesthetic steel appearance Automatic closure system at a 70mm opening length Drawer Length: 300/350/400/450/500/550mm Finish: Electrostatic (White) Silent running wheel system The improved stability guarantees a long product durability Dynamic load capacity: 25 Kg Safety system to avoid derailing Vertical and horizontal adjustment opportunity ±1,5mm horizontal and ±1mm vertical adjustment opportunity 4 Sam Box Drawer Set Slide CODE LENGTH PRODUCT TYPE PACKING COLOUR SM1121121 86 x 300mm STD 10 Set / Ctn White SM1121131 86 x 350mm STD 10 Set / Ctn White SM1121141 86 x 400mm STD 10 Set / Ctn White SM1121151 86 x 450mm STD 10 Set / Ctn White SM1121161 86 x 500mm STD 10 Set / Ctn White SM1121171 86 x 550mm STD 10 Set / Ctn White Soft Close option for Sam Box now available. See pg 67 for more information. Decorative Cover CODE MATERIAL PACKING COLOUR SM1121821 Plastic 200 Pcs/Box White Connecting Fittings CODE MATERIAL SCREW PACKING SM1121819 Steel Countersunk 200 Pcs/Box SM1121813 Steel Ø 10mm 200 Pcs/Box 60 www.nessco.com.au
SAMET SAM BOX 86MM MINIMUM INTERNAL CABINET DIMENSIONS min. 24 min. 54 32 10,5 min. 5 8,5 MINIMUM DIMENSION REQUIREMENTS SLIDE SCREW LOCATION Drawer Back Panel Width = Cabinet Internal Width - 31mm Drawer Back Panel Height = Minimum 71mm (for 16mm chipboards) Drawer Wooden Floor Width = Cabinet Internal Width - 31mm Drawer Wooden Floor Length = Side Length - 1mm BACK PANEL APPLICATION 32 34,5 A xmm 9 * A= 34,5 - xmm Chipboard Back Dimensions (08) 9333 4999 sales@nessco.com.au (03) 9706 8400 vicsales@nessco.com.au 61
SAMET SAM BOX 118MM Product Details Sam Box 118mm Aesthetic steel appearance Automatic closure system at a 70mm opening length Drawer Length: 300/350/400/450/500/550mm Finish: Electrostatic (White) Silent running wheel system The improved stability guarantees a long product durability Dynamic load capacity: 25 Kg Safety system to avoid derailing Vertical and horizontal adjustment opportunity ±1,5mm horizontal and ±1mm vertical adjustment opportunity 4 Sam Box Drawer Set Slide CODE LENGTH PRODUCT TYPE PACKING COLOUR SM1121221 118 x 300mm STD 5 Set / Ctn White SM1121231 118 x 350mm STD 5 Set / Ctn White SM1121241 118 x 400mm STD 5 Set / Ctn White SM1121251 118 x 450mm STD 5 Set / Ctn White SM1121261 118 x 500mm STD 5 Set / Ctn White SM1121271 118 x 550mm STD 5 Set / Ctn White Soft Close option for Sam Box now available. See pg 67 for more information. Decorative Cover CODE MATERIAL PACKING COLOUR SM1221821 Plastic 200 Pcs/Box White Connecting Fitting CODE MATERIAL SCREW PACKING SM1221819 Steel Countersunk 200 Pcs/Box SM1221813 Steel Ø 10mm 200 Pcs/Box 62 www.nessco.com.au
SAMET SAM BOX 118MM MINIMUM INTERNAL CABINET DIMENSIONS min. 24 min. 86 64 min. 5 10,5 8,5 MINIMUM DIMENSION REQUIREMENTS SLIDE SCREW LOCATION Drawer Back Panel Width = Cabinet Internal Width - 31mm Drawer Back Panel Height = Minimum 103mm (for 16mm chipboards) Drawer Wooden Floor Width = Cabinet Internal Width - 31mm Drawer Wooden Floor Length = Side Length - 1mm BACK PANEL APPLICATION 32 32 34,5 A 9 xmm 9 * A= 34,5 - xmm Chipboard Back Dimensions (08) 9333 4999 sales@nessco.com.au (03) 9706 8400 vicsales@nessco.com.au 63
SAMET SAM BOX 150MM Product Details Sam Box 150mm Aesthetic steel appearance Automatic closure system at a 70mm opening length Drawer Length: 300/350/400/450/500/550mm Finish: Electrostatic (White) Silent running wheel system The improved stability guarantees a long product durability Dynamic load capacity: 25 Kg Safety system to avoid derailing Vertical and horizontal adjustment opportunity ±1,5mm horizontal and ±1mm vertical adjustment opportunity 4 Sam Box Drawer Set Slide CODE LENGTH PRODUCT TYPE PACKING COLOUR SM1121321 150 x 300mm STD 5 Set / Ctn White SM1121331 150 x 350mm STD 5 Set / Ctn White SM1121341 150 x 400mm STD 5 Set / Ctn White SM1121351 150 x 450mm STD 5 Set / Ctn White SM1121361 150 x 500mm STD 5 Set / Ctn White SM1121371 150 x 550mm STD 5 Set / Ctn White Soft Close option for Sam Box now available. See pg 67 for more information. Decorative Cover CODE MATERIAL PACKING COLOUR SM1121821 Plastic 200 Pcs/Box White Connecting Fittings CODE MATERIAL SCREW PACKING SM1121819 Steel Countersunk 200 Pcs/Box SM1121813 Steel Ø 10mm 200 Pcs/Box 64 www.nessco.com.au
SAMET SAM BOX 150MM MINIMUM INTERNAL CABINET DIMENSIONS min. 24 64 min. 118 42,5 min. 5 8,5 MINIMUM DIMENSION REQUIREMENTS SLIDE SCREW LOCATION Drawer Back Panel Width = Cabinet Internal Width - 31mm Drawer Back Panel Height = Minimum 135mm (for 16mm chipboards) Drawer Wooden Floor Width = Cabinet Internal Width - 31mm Drawer Wooden Floor Length = Side Length - 1mm BACK PANEL APPLICATION 32 32 32 34,5 A 9 * A= 34,5 - xmm Chipboard Back Dimensions (08) 9333 4999 sales@nessco.com.au (03) 9706 8400 vicsales@nessco.com.au 65
SAMET SAM BOX ACCESSORIES Product Details Sam Box Gallery Railing Profiles 8 Different sizes and 3 different color versions for dimensions between 250 mm and 600 mm The front panel can easily be assembled and adjusted The internal space can be divided as needed The internal space dividers are tool free adjustable Usable with Sambox metal and wooden drawers 4 1 - Adjustable Gallery Railing CODE LENGTH PACKING SM11279081111 250mm 20 Set SM11279081121 300mm 20 Set SM11279081131 350mm 20 Set SM11279081141 400mm 20 Set SM11279081151 450mm 20 Set SM11279081161 500mm 20 Set SM11279081171 550mm 20 Set SM11279081181 600mm 20 Set 2 - Gallery Railing CODE LENGTH COLOUR PACKING SM111219811 1104mm White 10 Pcs / Ctn 3 - Gallery Railing Single Adapter CODE C0LOUR PACKING SM111219911 White 50 Pcs / Box 200 Pcs / Ctn 4 - Gallery Railing Double Adapter CODE C0LOUR PACKING SM1112199111 White 50 Pcs / Box 200 Pcs / Ctn Product Details Sam Box Folder Suspender The front panel can easily be assembled and adjusted The internal space can be divided as needed The internal space dividers are tool free adjustable Usable with Sambox metal and wooden drawers 4 Folder Suspender CODE LENGTH PACKING SM1127151 500mm 20 Set SM1127161 550mm 20 Set 66 www.nessco.com.au
SAMET SAM BOX DRAWER SOFT CLOSE MECHANISM Product Details Sam Box Drawer Soft Close Mechanism It is used to add soft closing function to Sam Box drawers Same product can be used at right and left sides It is advised to use two products for each drawer over 600mm Sam Box Soft Close Mechanism CODE C0LOUR PACKING SM112180 Grey 20 Pcs DRIVE PART ASSEMBLY SOFT CLOSE MECHANISM ASSEMBLY DRAWER HEIGHT 54mm 86mm 118mm 150mm FITTING PINS (A) 26mm 58mm 90mm 122mm After the adjustment process is done, use the fixing screw to retain the mechanism. (08) 9333 4999 sales@nessco.com.au (03) 9706 8400 vicsales@nessco.com.au 67
LOBEK EXPRO SOFT CLOSE DRAWER SYSTEM Silent and Revolutionary "Lobek's Expro Box System will allow you to have all of the comfort and convenience of a soft close drawer to suit your budget. It features a 40kg weight rating and also height and side adjustment. There is also a range of accessories to suit the Lobek drawer to make the most out of your space." LOBEK Characteristic Alteration Lobek s Expro Soft Close Drawer Systems offer different solutions for differing storage needs, with varying depth and functionality. Optional accessories combine to make each draw a tailored solution designed to meet your needs. 68 www.nessco.com.au
LOBEK EXPRO 105MM HIGH DRAWER Product Details Expro 99mm High Drawers Soft close mechanisms Minimum height 105mm Expro Soft Close Drawer - 105mm CODE COLOUR LENGTH MIN. INSTALL LENGTH MIN. INSTALL HEIGHT LK270EXP105 White 270mm 280mm 105mm LK300EXP105 White 300mm 305mm 105mm LK350EXP105 White 350mm 355mm 105mm LK400EXP105 White 400mm 405mm 105mm LK450EXP105 White 450mm 455mm 105mm LK500EXP105 White 500mm 505mm 105mm LK550EXP105 White 550mm 555mm 105mm MAIN PACKAGE INCLUDES: 1x Drawer Roller Runners & Sides 1x Drawer Sides 2x Front Connectors 1x Rear Connectors BOTTOM & BACK PANEL MEASUREMENT 16MM DENSITY PANEL REQUIREMENT SPACE FOR DRAWER 2 1 LW Inside cabinet width 105mm LW 1 Bottom panel width = Inside cabinet width -75±0.5 Bottom panel length = Runner length -10mm 2 Back panel = 70mm Back panel = Inside cabinet width -84±0.5 NL+5mm NL: Nominal length RUNNER INSTALLATION 37 224 32 32 9 9 56 5 Basic length : 300, 350, 400, 450, 500, 550 (08) 9333 4999 sales@nessco.com.au (03) 9706 8400 vicsales@nessco.com.au 69
LOBEK EXPRO 185MM HIGH DRAWER Product Details Expro 185mm High Drawer Soft close mechanisms Minimum height 185mm Expro Soft Close Drawer - 185mm CODE COLOUR LENGTH MIN. INSTALL LENGTH MIN. INSTALL HEIGHT LK270EXP185 White 270mm 280mm 185mm LK300EXP185 White 300mm 305mm 185mm LK350EXP185 White 350mm 355mm 185mm LK400EXP185 White 400mm 405mm 185mm LK450EXP185 White 450mm 455mm 185mm LK500EXP185 White 500mm 505mm 185mm LK550EXP185 White 550mm 555mm 185mm MAIN PACKAGE INCLUDES: 1x Drawer Roller Runners 1x Drawer Sides 2x Front Connectors 1x Gallery Railings 1x Rear Connectors BOTTOM & BACK PANEL MEASUREMENT 16MM DENSITY PANEL REQUIREMENT SPACE FOR DRAWER 2 1 LW Inside cabinet width 185mm LW 1 Bottom panel width = Inside cabinet width -75±0.5 Bottom panel length = Runner length -10mm 2 Back panel = 70mm Back panel = Inside cabinet width -84±0.5 NL+5mm NL: Nominal length RUNNER INSTALLATION 37 224 32 32 9 9 56 5 Basic length : 300, 350, 400, 450, 500, 550 70 www.nessco.com.au
LOBEK EXPRO 225MM HIGH DRAWER Product Details Expro 225mm High Drawer Soft close mechanisms Minimum height 225mm Expro Soft Close Drawer - 185mm CODE COLOUR LENGTH OPTIONAL EXTRA MIN. INSTALL LENGTH MIN. INSTALL HEIGHT LK400EXP225 White 400mm 405mm 225mm LK450EXP225 White 450mm 455mm 225mm LK500EXP225 White 500mm 505mm 225mm LK550EXP225 White 550mm 555mm 225mm MAIN PACKAGE INCLUDES: 1x Drawer Roller Runners 1x Drawer Sides Infills CODE LENGTH COLOUR LK231-500B-WH 500mm White 2x Front Connectors 1x Gallery Railings 1x Rear Connectors BOTTOM & BACK PANEL MEASUREMENT 16MM DENSITY PANEL REQUIREMENT SPACE FOR DRAWER 2 1 LW Inside cabinet width 225mm LW 1 Bottom panel width = Inside cabinet width -75±0.5 Bottom panel length = Runner length -10mm 2 Back panel = 70mm Back panel = Inside cabinet width -84±0.5 NL+5mm NL: Nominal length RUNNER INSTALLATION 37 224 32 32 9 9 56 5 Basic length : 300, 350, 400, 450, 500, 550 (08) 9333 4999 sales@nessco.com.au (03) 9706 8400 vicsales@nessco.com.au 71
LOBEK DRAWER INSTALLATION INFORMATION Lobek Expro 105mm High Drawer Installation Guide Inside cabinet dimension Front panel mounting positions Front fixing bracket positions Back panel mounting positions B size overlay Front fixing bracket mounting Front panel removing Front panel height adjustment ±2mm Front panel side adjustment: right 1mm Front panel side adjustment: left 1mm Drawer mounting Drawer mounting Fuction of soft closing 72 www.nessco.com.au
LOBEK DRAWER INSTALLATION INFORMATION Lobek Expro 185mm & 225mm High Drawer Installation Guide Inside cabinet dimension Front panel mounting positions Front fixing brackets positions Back panel mounting positions B size overlay Front fixing brackets mounting Front panel removing Front panel height adjustment: ±2mm Front panel side adjustment: right 1mm Front panel side adjustment: left 1mm Drawer mounting Heightened draw-rod installing Drawer mounting Function of soft closing (08) 9333 4999 sales@nessco.com.au (03) 9706 8400 vicsales@nessco.com.au 73
SAMET & LOBEK ROLLER RUNNERS Drawer Roller Runner - White CODE DESCRIPTION CAPACITY LENGTH COLOUR DRSE250 Drawer Roller Runner 25kg 250 White DRSE300 Drawer Roller Runner 25kg 300 White DRSE350 Drawer Roller Runner 25kg 350 White DRSE400 Drawer Roller Runner 25kg 400 White DRSE450 Drawer Roller Runner 25kg 450 White DRSE500 Drawer Roller Runner 25kg 500 White DRSE550 Drawer Roller Runner 25kg 550 White Drawer Roller Runner - Black CODE DESCRIPTION CAPACITY LENGTH COLOUR DRSE250B Drawer Roller Runner 25kg 250 Black DRSE300B Drawer Roller Runner 25kg 300 Black DRSE350B Drawer Roller Runner 25kg 350 Black DRSE400B Drawer Roller Runner 25kg 400 Black DRSE450B Drawer Roller Runner 25kg 450 Black DRSE500B Drawer Roller Runner 25kg 500 Black DRSE550B Drawer Roller Runner 25kg 550 Black 74 www.nessco.com.au
DRAWER (08) 9333 4999 sales@nessco.com.au (03) 9706 8400 vicsales@nessco.com.au 75