Adjusting screw with M8 or M thread Rigid, for glide inserts, steel thread Finish/Colour: Black, thread galvanized Version: With acceptance Ø30 mm Thread M8 650.22.381 M 650.22.382 Packing: 1 or 0 pcs. With ball joint, for glide inserts Area of application: For adaptation on uneveness of floors, steel thread Finish/Colour: Black, thread galvanized Version: With acceptance Ø30 mm SW 13 hexagon Thread M8 650.22.391 M 650.22.392 Packing: 1 or 0 pcs. Order information Please order glide inserts with acceptance 30 mm for different floors separately. With steel foot plate SW 17 hexagon glide Finish/Colour: Nickel plated, glide black Installation: With M screw, steel galvanized Thread length mm 20 651.02.909 Packing: 1 or 0 pcs. FF.21
Adjusting screw with M8 or M thread With plastic foot plate SW 17 hexagon Colour: Black Installation: With M screw, steel galvanized Thread length mm 30 651.01.304 50 651.01.500 Packing: 1 or 0 pcs. With ball joint and hexagon socket Diameter D mm Dim. B mm 25 651.08.301 30 651.08.302 Packing: 0 pcs. Adjusting screw with M8 thread M8 screw on plate Material: Steel Finish: Galvanized Internal thread M8 651.14.900 With knock-in T-nut SW 8 square Packing: 500 pcs. protective cap Colour: Black protective cap Drive: Slot recess at top, SW 8 square at bottom For drilling: Ø mm Length mm 45 637.05.001 70 637.05.0 Packing: 0 pcs. FF.22
With wood mounting block Size protective cap Colour: White protective cap Drive: SW 8 square at bottom Installation: Screw fixing Screw length SW 8 square Mounting height mm Screw length mm 55 30 637.12.229 80 70 637.12.265 0 637.12.283 Packing: 0 pcs. Adjusting screw with M thread SW 8 square SW 5 square Material: Stainless steel base plate, plastic glide Finish/Colour: Base plate ground, glide black Drive: SW 5 hexagon socket at top, SW 8 square surface at bottom Load bearing capacity: 150 kg Thread length mm 60 637.00.020 Packing: 1 or 25 pcs. Screw on bracket for adjusting screw with M thread Material: Steel Finish: Galvanized Version Drilling: M at top, Ø.5 mm at bottom 637.30.980 Packing: 1 or 150 pcs. FF.23
M Ceiling clamping screw Material: Steel screw, plastic plate Finish: Screw galvanized Colour: White plate Version: With swivelling plate and centring tip SW 14 square Thread length mm 60 637.01.717 Packing: 1 or 0 pcs. Adjusting screw with M thread Load capacity: 300 kg (static) Drive: SW 4 hexagon socket or slot recess Version: With swivelling base plate Length L mm Hexagon socket Slot recess 60 637.03.009 637.02.009 70 637.03.018 637.02.018 80 637.03.027 637.02.027 90 637.02.036 0 637.03.045 637.02.045 120 637.03.054 637.02.054 Packing: 1, 0 or 200 pcs. Protective cap for adjusting screw with M thread Colour: Transparent Installation Pushing onto base plate 637.02.090 Packing: 1, 0 or 500 pcs. FF.24
Fixing elements with M internal thread Finish: Galvanized screw on bracket and plate, bright knock-in T-nut and screw in socket Screw on bracket Screw on bracket 637.07.004 Packing: 1 or 0 pcs. Screw on plate Screw on plate 637.09.008 Packing: 1 or 0 pcs. Knock-in T-nut Knock-in T-nut 031.00.301 Packing: 1 or 500 pcs. Screw in socket Screw in socket 030.00.502 Packing: 1 or 0 pcs. FF.25
Plinth adjusting fitting with screw on bracket Material: Steel Finish: Galvanized Load bearing capacity 130 kg Drive: Slot recess Version: Swivelling base plate Adjusting range: +25 mm Threaded spindle: M x 0 mm Installation Screw fixing 637.30.941 Packing: 1, 20 or 0 pcs. Protective cap for plinth adjusting fitting with screw on bracket Colour: Transparent Installation Pushing onto base plate 637.02.090 Packing: 1, 0 or 500 pcs. FF.26
Plinth adjusting fitting with screw on bracket Load bearing capacity 150 kg Drive: SW 5 hexagon socket Version: With swivelling base plate Adjusting range: +25 mm Threaded spindle: M x 70 mm Installation Installation Groove mounting and screw fixing 637.23.900 Packing: 1, 0 or 500 pcs. Adjustable plinth foot Colour: Black Height adjustment: +15 mm For plinth height mm 80 637.17.302 0 637.17.303 120 637.17.304 150 637.17.305 Packing: 1 or 0 pcs. Plinth height Colour: Black Adjusting range: -5 to + mm Installation: With M fixing screw or 3 chipboard screws with countersunk head Ø3.5 mm For plinth height mm 80 637.45.308 0 637.45.326 120 637.45.344 150 637.45.371 Packing: 1 or 200 pcs. FF.27
Accessories for adjustable plinth foot Plinth clip Adjustable cabinet leg Screw Fixing Groove mounting The height can be adjusted up to 30 mm Made from the quality plastic polypropylene, which is elastic and durable even being directly exposed to moisture, humidity or water Maximum weight: 150 kg/4 pcs. With Knock down style, the adjustable legs are easy to install Colour: Black Furniture leg for wooden panel Installation Screw fixing 637.45.906 Groove mounting 637.45.915 Packing: 1, 0 or 500 pcs. H = 0-130 mm or 140-170 mm M x 33 mm fixing screw Material: Steel Finish: Galvanized Length mm 33 637.45.997 Packing: 1 or 0 pcs. black (polypropylene) Load capacity: Max. 150 kg/4 pcs. Adjustable height: 30 mm Adjustable mm 0 130 637.15.012 140 170 637.15.014 Packing: Leg 4 pcs., clip 2 pcs. Clip for wooden panel Cover cap Colour: White Diameter mm 24 637.45.791 Packing: 1, 0 or 1,000 pcs. black (polypropylene) Installation: Screw fixing to front panel Packing: 1 pc. 637.15.019 FF.28
Organizational Kitchen Fittings Kitchen Cabinet Accessories Furniture leg for aluminium panel Aluminium front panel for adjustable cabinet leg H = 0-130 mm or 140-170 mm black (polypropylene) Load capacity: Max. 150 kg/4 pcs. Adjustable height: 30 mm Adjustable mm 0 130 637.15.002 140 170 637.15.004 Packing: Leg 4 pcs., clip 2 pcs. Material: Aluminium Support with: 1 panel, 1 side corner Dimension (H x L) mm 0 x 4,000 713.29.911 120 x 4,000 713.29.921 150 x 4,000 713.29.931 Packing: 1 set Side corner for aluminium front panel Clip for aluminium panel Installation: Slide-in to front panel Material Plastic black (polypropylene) 637.15.009 Packing: 1 pc. (polypropylene) Finish: Aluminium coloured Installation: Insert panel into groove Dimension (H x L) mm 0 713.29.991 120 713.29.992 150 713.29.993 Packing: 1 pc. FF.29
Plinth sealing profile, harpoon-type fixing Plinth sealing strip with lip (combination of hard and soft) Installation: Press fitting into carcase side panel Function This strip reliably prevents moisture from penetrating the front edges of the plinth panels. Round profile Function This strip reliably prevents moisture from penetrating the front edges of the plinth panels. The soft PVC sealing lip adapts perfectly to the floor surface. Colour Screw fixing Grey-brown 716.99.1 White 716.99.708 Light grey 716.99.501 Brown 716.99.0 Packing: 80 m Curved profile (combination of hard and soft) Colour For panel thickness 16 mm 19 mm Grey-brown 713.22.161 713.22.191 White 713.22.766 713.22.791 Light grey 713.22.561 713.22.591 Brown 713.22.168 713.22.195 Transparent 713.22.060 713.22.097 Packing: 2.5 m Colour Screw fixing Grey-brown 716.97.090 White 716.97.790 Light grey 716.97.590 Brown 716.97.190 Packing: 2.5 m FF.30
Plinth adjusting fitting system for self confection Area of application: For easy cutting to length and mounting of dimension individually frameworks Height adjustment mm Version: Feet sleeve concealed, adjustable range for uneven floors, therefore consistent appearance Frame profile Adjustment foot with sleeve Area of application: For basically construction of frameworks Version: For cutting to length Material: Aluminium Finish Bright 637.60.030 Packing: 3 m Area of application: Suitable as corner Corner connector Area of application: Connecting of two with 45 mitre cutted frame profiles Material: Zinc alloy Version: With 2 pre-mounted clamp screws Finish Bright 637.60.0 Packing: 1 pc. and centre foot, use per 1 m profile length one centre foot Material: Aluminium/ plastic foot and sleeve, zinc alloy clamping piece Finish/Colour: Foot and sleeve grey, clamping piece bright Version: With insertion acceptance and clamping piece Dimensions: Sleeve round Ø40 mm, sleeve square 35 x 35 mm Height mm Version Silver coloured anodized Packing: 1 pc. Nickel plated matt 0 Round 637.60.911 637.60.611 Square 637.60.921 637.60.621 150 Round 637.60.912 637.60.612 Square 637.60.922 637.60.622 FF.31
Cover profile Centre foot for plinth adjusting fitting system Area of application: Covering of frame profiles Material: Aluminium Version: Clipping into frame profile with plastic clips Finish Silver coloured anodized 637.60.931 Nickel plated matt 637.60.631 Packing: 3 m Order information Please order plastic clips separately. Plastic clip Installation information All 500 mm should be inserted one clip. Area of application: Connecting of cover profile with frame profile Version: Pressing into frame profile Colour Natural coloured 637.60.440 Packing: or 0 pcs. Material: Aluminium Finish: Silver coloured anodized Height adjustment: 14 mm Version: Piecewise as custom-made product Installation: Plug fit, additional screw fixing Frame width: Max. 3,900 mm Supplied with fixing material Height H mm 80 637.84.933 0 637.84.935 150 637.84.940 200 637.84.945 Packing: 1 pair FF.32