Ordering number : ENA040A SB01-1C Schottky Barrier Diode 10V, 0.1A, Low IR, Single CP http://onsemi.com Applications High frequency rectification (switching regulators, converters, choppers) Features Low forward voltage (VF max=0.v) Fast reverse recovery time (trr max=10ns) Low switching noise Low leakage current and high reliability due to highly reliable planar structure Specifications Absolute Maximum Ratings at Ta= C Parameter Symbol Conditions Ratings Unit Repetitive Peak Reverse Voltage VRRM 10 V Nonrepetitive Peak Reverse Surge Voltage VRSM 1 V Average Output Current IO 100 ma Surge Forward Current IFSM 0Hz sine wave, 1 cycle A Junction Temperature Tj -- to +1 C Storage Temperature Tstg -- to +1 C Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the Recommended Operating Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect device reliability. Package Dimensions unit : mm (typ) 01A-004.9 0.1 Product & Package Information Package : CP JEITA, JEDEC : SC-9, TO-6, SOT-, TO-6AB Minimum Packing Quantity :,000 pcs./reel Packing Type: TB Marking. 1. 0. SB01-1C-TB-E 0. 1 0.9 0.4 TB LOT No. F LOT No. 1.1 0.0 0. 1 : Anode : No Contact : Cathode CP Electrical Connection 1 Semiconductor Components Industries, LLC, 01 September, 01 111 TKIM/406SB MSIM TB-000004 No.A040-1/6
SB01-1C Electrical Characteristics at Ta= C Parameter Symbol Conditions Ratings min typ max Unit Reverse Voltage VR IR=00μA 10 V Forward Voltage VF IF=100mA 0. V Reverse Current IR VR=V 0 μa Interterminal Capacitance C VR=10V, f=1mhz pf Reverse Recovery Time trr IF=IR=100mA, See specified Test Circuit. 10 ns Rth(j-a)1 40 C / W Thermal Resistance Mounted in Cu-foiled area of 16mm 0.mm Rth(j-a) on glass epoxy board 0 C / W trr Test Circuit Duty 10% 10μs 0Ω 100Ω 10Ω --V 100mA 100mA trr 10mA Ordering Information Forward Current, I F -- ma -- mw Average Forward Power Dissipation, P F (AV) 1000 100 10 Ta=1 C C IF -- VF 0 0.4 0.8 1. 1.6.0.4 Forward Voltage, V F -- V ID004 10 100 80 60 40 0 (1)Rectangular wave θ=60 ()Rectangular wave θ=10 ()Rectangular wave θ=180 (4)Sine wave θ=180 Rectangular wave θ 60 PF(AV) -- IO 60 0 0 0 40 60 80 100 10 Average Output Current, I O -- ma ID006 (1) () (4) Sine wave 180 () Interterminal Capacitance, C -- pf Reverse Current, I R -- μa 1000 100 10 0.1 0 0 100 1 10 1 10 IR -- VR Ta=1 C 100 C C 0 C C Reverse Voltage, V R -- V C -- VR ID00 f=1mhz 10 100 Reverse Voltage, V R -- V ID00 No.A040-/6
SB01-1C Surge Forward Current, I FSM (Peak) -- A 6 4 1 IFSM -- t Current waveform 0Hz sine wave 0 0.01 0.1 Time, t -- s IT008 I S 0ms t NoA040-/6
SB01-1C Embossed Taping Specification SB01-1C-TB-E No.A040-4/6
SB01-1C Outline Drawing SB01-1C-TB-E Land Pattern Example Mass (g) Unit 0.01 * For reference mm Unit: mm 0.8.4 0.9 0.9 NoA040-/6
SB01-1C ON Semiconductor and the ON logo are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of SCILLC s product/patent coverage may be accessed at www.onsemi.com/site/pdf/patent-marking.pdf. SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Typical parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including Typicals must be validated for each customer application by customer s technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PS No.A040-6/6