Thanks for shopping with Improvements! Kitchen Work Cabinet Item #377635 To order, call 1-800-642-2112 West Chester, OH 45069 Made in Thailand 0912 Rev B If you have any questions regarding this product, call 1-800-642-2112 and ask for our product specialists (Mon.-Fri. 9:00-5:00 EST) or e-mail: productspecialist@improvementscatalog.com See many more products on the Internet! www.improvementscatalog.com Kitchen Work Cabinet White #377635 Current instructions at www.improvementscatalog.com 1-800-642-2112 Page 1 of 7
PARTS LIST: A. Cabinet Right Side Qty: 1 B. Towel Bar Qty: 1 C. Front Qty: 1 D. Frame Left Side Qty: 1 E. Frame Right Side Qty: 1 F. Frame Back Qty: 1 G. Drawer Front Qty: 1 H. Drawer Right Side Qty: 1 I. Drawer Left Side Qty: 1 J. Drawer Back Qty: 1 K. Drawer Bottom Qty: 1 L. Granite Top Qty: 1 M. Cabinet Left Side Qty: 1 N. Back Rail Qty: 1 O. Front Rail Qty: 1 P. Cabinet Back Qty: 1 Q. Base Qty: 1 Kitchen Work Cabinet White #377635 Current instructions at www.improvementscatalog.com 1-800-642-2112 Page 2 of 7
HARDWARE LIST: 1. Medium Hex Screw 30mm long Qty: 10 2. Long Hex Screw 40mm long Qty: 4 3. Allen Wrench Qty: 1 4. Handle Qty: 2 5. Handle Screw 20mm long Qty: 4 6. Pin Bracket Qty: 2 7. Caster Wheel Qty: 4 8. Short Flat Head Screw 12mm long Qty: 20 9. Long Flat Head Screw 25mm long Qty: 12 10. Short Hex Screw 25mm long Qty: 4 Note: Read these instructions carefully before assembling. Tools required: Phillips screwdriver, flat screwdriver. Find a clean, smooth area on which to work, such as a carpet, in order to avoid scratching the wood surfaces. Wait to dispose of the packing material until assembly is complete and all parts and hardware are accounted for. Two people might be required for assembly. Kitchen Work Cabinet White #377635 Current instructions at www.improvementscatalog.com 1-800-642-2112 Page 3 of 7
Step 1: Use Medium Hex Screws (1) to attach Towel Bar (B) to the Cabinet Right Side (A), and tighten with Allen Wrench (3). Figure 1 1 2 Step 2: Use Long Flat Head Screws (9) to attach Frame Right Side (E) and Frame Left Side (D) to the Frame Back (F). Use Short Hex Screws (10) to attach the Frame Right Side (E) and Frame Left Side (D) to the Front Door (C) as shown. Use Allen Wrench (3) to tighten all screws. Attach the Handle (4) to the Front (C) with the Handle Screws (5). Use the Short Flat Head Screws (8) to attach the Pin Bracket (6) to the back of the Front (C). Figure 2 10 4 4 1 5 2 6 2 8 4 9 4 Kitchen Work Cabinet White #377635 Current instructions at www.improvementscatalog.com 1-800-642-2112 Page 4 of 7
Step 3: Use Long Flat Head Screws (9) to assemble the Drawer Left Side (I) and Drawer Right Side (H) to the Drawer Back (J). Tighten the screws with Allen Wrench (3). Slide the Drawer Bottom (K) into the grooves in the Drawer Left Side (I), Drawer Right Side (H) and Drawer Back (J). Use Long Flat Head Screws (9) to attach the Drawer Front (G). Tighten all screws using Allen Wrench (3). Use Handle Screw (5) to attach the Handle (4) to the Drawer Front (G). Figure 3 4 1 5 2 9 8 Step 4: Place the Granite Top (L) upside down on a soft, clean surface. Use Medium Hex Screws (1) to loosely attach the Cabinet Left Side (M) to one of the wood rails on the Granite Top (L). Do not yet fully tighten the screws. Figure 4 1 2 Kitchen Work Cabinet White #377635 Current instructions at www.improvementscatalog.com 1-800-642-2112 Page 5 of 7
Step 5: Use Medium Hex Screws (1) to loosely attach the Back Rail (N) to the Cabinet Left Side (M). Do not yet fully tighten the screws. Hold the end of the Front Rail (O) in the slot of the Left Side Frame (M). Figure 5 1 2 Step 6: Use Medium Hex Screws (1) to loosely attach the Back Rail (N) to the Cabinet Right Side (A) and the other wood rail on the Granite Top (L). Do not yet fully tighten the screws. Hold the Front and frame assembly so the pin on the Pin Brackets (6) fit into the holes of the Cabinet Left and Right Sides, as shown in Figure 6. Insert Medium Hex Screws (1) through the wood piece on the Granite Top (L) to attach Right Side Panel (A) using Allen Wrench (3) to tighten the eight screws from Steps 4, 5, and 6. Slide the Back Panel (P) into the grooves of both Sides (A, M) and Back Rail (N). Figure 6 1 4 Kitchen Work Cabinet White #377635 Current instructions at www.improvementscatalog.com 1-800-642-2112 Page 6 of 7
Step 7: Use Short Flat Head Screws (8) to secure the Wheels (7) to the Base (Q). Set the Base on the bottom of the unit so the Back fits into the slot on the Base. Use Long Hex Screws (2) and Allen Wrench (3) to secure the Bottom Base (Q) to the Side Frames (A and M). Figure 7 2 4 7 4 8 16 Step 8: Turn the Garbage Cart upright, and slide the assembled drawer into the metal glides between Side Frames (A and M). Open the door to insert a wastebasket up to 14-1/2"W x 11"D x 18"H (not included) inside the frame assembly. Figure 8 Kitchen Work Cabinet White #377635 Current instructions at www.improvementscatalog.com 1-800-642-2112 Page 7 of 7