Features/Benefits IP68 sealed to endure harsh environments,000,000 life cycle Longer solder leads for ease of wire installation Multiple housing styles Up to 5 resistive load Wirelead options available RoHS compliant Typical pplications Control Grips Off-Road Panels Heavy Equipment Industrial Instruments Lifts Conveyor Controls Specifications FUNCTION: SPST, SPDT Double Break (Form Z) Momentary CONTCT RRNGEMENT: and MOUNTING TYPE: Threaded front mount TORQUE SPEC FOR THREDED BODY: Do not exceed 50 in-lbs (5.65 N-m) Mechanical OPERTING LIFE:,000,000 cycles TOTL TRVEL:.6 ± 0.5 mm OPERTING POINT 0.9 ± 0.5 mm OVER TRVEL: 0.5 min. OPERTING FORCE: 8N ±.5N VIBRTION: 0-500 Hz 0g Max SHOCK: 50g ms sawtooth wave Electrical CONTCT RTING: Option Q Silver / VDC resistive (00,000 cycles) 5/ VDC resistive (5,000 cycles) / VDC resistive (5,000 cycles) Option G Gold over Silver 0m/5 VDC resistive (,000,000 cycles) DIELECTRIC STRENGTH: 000 V C for min. INSULTION RESISTNCE: G Ω @ 500 VDC INITIL CONTCT RESISTNCE 50 mω max (without wire leads) BOUNCE TIME: <5 ms Materials HOUSING: PBT/PC BSE: PBT CP: PBT CTUTOR: PBT INTERNL SEL: Silicone rubber TERMINLS: Copper with silver nickel inlay, silver plating MOVBLE CONTCT: Copper alloy, gold over silver plating TERMINL SEL: Epoxy Operating Environment OPERTING TEMPERTURE: -0 C to +85 C ESD PROTECTION: 5KV min. Process Environment SELING: IP68 NOTE: Specifications and materials listed above are for switches with standard options. For information on specific and custom switches, please contact Customer Service. Build--Switch To order, simply select desired option from each category and place in the appropriate box. P N P 8 E Designation PNP Operating Force 8 8 Newtons ctuator Style S Standard E Extended (D housing style only) ctuator Color * Black (STD) Red 5 Yellow Housing Style T Standard threaded mount D Dome bezel Housing Color * dditional colors availble, please contact Customer Service Black (STD) Terminal Seal E Epoxy ll models are epoxy sealed Contact Material Q Silver (STD) G Gold over silver Termination 0 PC Pin (G contact material) 0 Solder Lug (STD) W x WG UL569 wire (overmolded) W x WG UL569 wire (overmolded) W x WG UL569 wire (overmolded) Circuit C SPDT W SPST NC Y SPST NO Third ngle Projection -55
,95 [.90] 9,5 [.60] 0,5 MX [.00] 5/- UNS- STNDRD VIEW [.69] 6,6 [.60] [.09],85 [.9],9 [.] 5, [.09],8 [.5] 0, [.06] 0,8 [.5] OPERTING FORCE OPERTING FORCE 8 8 N CTUTOR STYLE S STNDRD E EXTENDED (D HOUSING STYLE ONLY),6 [.0] 7, [.8] [.69] 8,0 [.9] 8,5 [.] [.69],55 [.79] 9,5 [.60] SCLE : SCLE : CTUTOR COLOR CTUTOR COLOR Black Red 5 Yellow -56
T STNDRD THREDED MOUNT,75 REF [.896],6 TYP [.55],95 REF [.90] HOUSING STYLE 9,5 [.60] 6,6 [.60] 0,5 [.00] MX [.69] [.09] 5,9 [.],8 TYP [.5] 5/- UNS-,85 TYP [.9] 0,7 TYP [.08] PC TERMINLS,7 TYP [.06] 0,TYP [.06] 0,8 [.5],9 TYP [.] EPOXY SELED X 65 7,9 [.] 65 [.95] ( & ) SCLE 9: ( & ) SCLE 9: 0,9 [.05] PC HOLE PTTERN BORD VIEW X,67REF [.066] X,58REF [.],95 [.59],5 [.77] [.95] TYP [.] PNEL CUTOUT, [.8] D DOME BEZEL, [.8] [.689] [.] [.69] PNEL CUTOUT,6 [.0] 0,5 [.00],6 [.8] 0,8 REF [.89],6 TYP [.55],65 TYP [.8] REF [.87] 5,5 [.5] 5/- UNS-,8 [.5] 0,7 TYP [.08],7TYP [.06] 0, TYP [.06],9 [.] X,67REF [.066] X 65 PC TERMINLS PC HOLE PTTERN BORD VIEW 0,9 [.05] 7,9 [.] X,58REF [.] 65 [.95] [.95] TYP EXTENDED CP,55 [.79] 9,5 [.60] 0,8 [.5] TNGENT TO FLT -57
HOUSING COLOR COLOR Black (STD) CIRCUIT W SPST NC Y SPST NO C SPDT C SPDT WIRES RED RED WIRES WIRES BLCK RED COMMON WIRES RED RED TERMINTION 0 PC PIN 0 SOLDER LUG (STD) X,5 [.75] X X 0,7 [.08],5 [.0] X,85 [.9] X X, [.07] X, [.09] X, [.09] X,65 [.8] X X, [.07] W x WG UL569 wire (overmolded) W x WG UL569 wire (overmolded) W x WG UL569 wire (overmolded) 6,88 REF [.665] 6,88 REF [.665] 0,8±,7 [.000±.500] WG UL569 WIRE SEE SCHEMTIC -58
Q G CONTCT MTERIL CONTCT MTERIL Silver (STD) Gold over silver TERMINL SEL E EPOXY ll models are epoxy sealed HRDWRE HEX NUT 707000 Nickel-plated LOCKWSHER 70000 PNEL GSKET 85D0000 5/- UNS-B THD 5.06 [0.59].00 [0.7].7 [0.558].00 [0.55]. [0.77] 0.0 CHMFER SIDES.98 [0.078] 0.89 [0.05] 0.5 [0.0] 0.56 [0.0] -59