Thanks for shopping with Improvements! Chapin Secretary Desk Item #398643 Note: You will receive this desk in two boxes. To order, call 1-800-642-2112 West Chester, OH 45069 Made in China 1111 If you have any questions regarding this product, call 1-800-642-2112 and ask for our product specialists (Mon.-Fri. 9:00-5:00 EST) or e-mail: productspecialist@improvementscatalog.com See many more products on the Internet! www.improvementscatalog.com
PARTS LIST: A. Bottom Qty: 1 B. Left foot Qty: 2 C. Divider Qty: 1 D. Upper Shelf Qty: 1 E. Drawer Front Qty: 2 F. Right Drawer Side Qty: 2 G. Drawer Back Qty: 2 H. Drawer Bottom Qty: 2 I. Pull Down Door Qty: 1 J. Right Door Qty: 1 K. Left Door Qty: 1 L. Right Side Qty: 1 M. Left Side Qty: 1 N. Middle Shelf Qty: 1 O. Top Qty: 1 P. Adjustable Shelf Qty: 1 Q. Left Back Qty: 1 R. Right Back Qty: 1 S. Left Drawer Side Qty: 2 T. Right Foot Qty: 2
HARDWARE LIST: 1. Small Dowel Qty: 4 7 / 32 x 1 3 / 16 long 2. Large Dowel Qty: 24 5 / 16 x 1 3 / 16 long 3. Handle Qty: 5 4. Cam Bolt Qty: 14 5. Cam Lock Qty: 14 6. Screw 3 / 16 x 2 3 / 4 long Qty: 2 7. Bolt 1 / 4 x 1 1 / 2 long Qty: 4 8. Screw 5 / 32 x 1 long Qty: 16 9. Handle Screw 1 / 8 x 15 / 32 long Qty: 32 10. Support Screw 1 / 8 x 15 / 32 long Qty: 36 11. Desk Hinge Qty: 2 12. Door Hinge Qty: 4 13. Right Support Qty: 1 14. Left Support Qty: 1 15. Barrel Nut Qty: 4 16. Bolt 1 / 4 x 2 long Qty: 4 17. Roundhead Screw Qty: 28 1 / 8 x 15 / 32 long 18. Shelf Pin Qty: 4 19. Plastic Nut Qty: 2 20. Screw 5 / 32 x 1 long Qty: 2 21. Allen Wrench Qty: 1 22. Lock Washer Qty: 8 23. Flat Washer Qty: 8 Note: Read these instructions carefully before assembling. Tools required: Phillips screwdriver, flat screwdriver. Wait to dispose of the packing material until assembly is complete and all parts and hardware are accounted for. Two people might be required for assembly.
Step 1: Use Small Dowels (1), Lock Washers (22), Flat Washers (23) and Bolts (7) to attach the Feet (B, T) to the Bottom (A). Figure 1 1 4 7 4 22 4 23 4 Step 2: Attach Upper Divider (C) to the Upper Shelf (D) with Plastic Nuts (19), Screws (6) and Wood Dowels (2). Figure 2 2 2 6 2 19 2
Step 3: Use Screws (9) to attach the Handles (3) to the Left and Right Door (J, K). Figure 3 3 2 9 8 Step 4: Use Screws (8) to assemble TWO drawers (F, S, E, G, H). Use Screws (9) to attach the Handle (3) to the Drawer Front (E). Figure 4 3 2 8 16 9 8
Step 5: Use Screws (9) to attach the Handle (3) to the Pull Down Door (I). Figure 5 3 1 9 4 Step 6: Use Wood Dowels (2), Cam Locks (5) and Cam Bolts (4) to attach Side (M, L) to the Middle Shelf (N) and the Upper Shelf (D). Figure 6 2 12 4 8 5 8
Step 7: Use Wood Dowels (2), Barrel Nuts (15) Bolts (16), Lock Washers (22) and Flat Washers (23) to attach the Bottom (A) to the side panels. Figure 7 2 4 15 4 16 4 20 2 22 4 23 4
Step 8: Insert Wood Dowels (2) into the Side (L, M) and the Divider (C). Use Cam Locks (5) and Cam Bolts (4) to attach the Top (O) to the side panels and the divider. Figure 8 2 6 4 6 5 6 Step 9: Use Screws (9 and 10) to attach Hinges (11), Crank Hinges (12) and Supports (13, 14) to the Side (M, L) and the Middle Shelf (N). Figure 9 9 6 10 8 11 2 12 4 13 2
Step 10: Attach the Pull Down Door (I) to the Middle Shelf (N) with Hinges (11, 13, and 14) and Screws (9). Attach Left and Right Doors (K, J) to the side panels with Hinges (12) and Screws (10). Figure 10 9 6 10 12 Step 11: Use Roundhead Screws (17) to attach Backs (Q, R). Figure 11 17 28
Step 12: If the doors are not closing properly, adjust the Door Hinges (12) with a Philips screwdriver. Insert the Shelf Pins (18) into the Sides (M, L) and place the Adjustable Shelf (P) on the Pins. Insert the drawers. Figure 12 18 4
SAVE THESE INSTRUCTIONS ANTI-TIP HARDWARE MOUNTING INSTRUCTIONS FOR DRYWALL Needed for assembly (not included): Phillips screwdriver, drill, 7 / 32 drill bit. For safety reasons, we recommend that you install the included anti-tip hardware to help prevent the bookcase from unexpectedly tipping. The included materials are designed to mount the anti-tip hardware to drywall. Please consult a representative at a hardware/home improvement store. (A2) Long Screw Qty: 1 (B2) Short Screw 1 / 8 x 15 / 32 long Qty: 1 (C2) L-Bracket Qty: 1 (D2) Plastic Anchor Qty: 1 (E2) Zip Tie Qty: 1 STEP 1 Use Short Screw (B2) to attach the L-Bracket (C2) to the back of the desk near the top. STEP 2: - Set the unit in the desired location and mark the wall behind the bracket. - Move the desk aside, and ensure that there are no electrical, plumbing or ventilation systems directly behind this point in the wall. STEP 3: - Drill a 7 / 32 hole in the drywall. - Press the Plastic Anchor (D2) into the drywall. Ensure that the Anchor fits securely in the wall. - Using Long Screw (A2), attach the second L-Bracket (C2) to the wall. STEP 4: - Push the unit back against the wall so the L-bracket on the unit is in front of the L-bracket on the wall. - Using the Zip Tie (E2), connect the two brackets together as shown.