a Assembly and installation specifications Space requirements B height Space requirements D height Rear view D height 9.5 9.5 07 7 min. 7 9 min. 7.5 min. 7.5 min. Application 500 (0") 6 550 (") 8 8 8 96 7 0 Dimensions in millimeters (inch equivalents as noted) Subject to technical modifications without notice. 008 6
TANDEMBOX handle/handle with latch Product Description Basic component - For roll-outs behind high fronted drawer - Provides handle for opening interior roll-out - When enabled, handle with latch allows roll-out to open with drawer - Roll-out can be released from drawer front with the push of a button - Easily enabled / disabled with a coin - Minimum interior cabinet width (9-/") Handle ZIF.7005 Handle with latch ZIF.7007 Handle Operation Installation The interior roll-out may be openned using the handle. Handle also acts as a cushion between interior drawer and drawer front. Dimensions in millimeters 6 Subject to technical modifications without notice. 008
Handle with latch a Operation (latch enabled) Operation (latch disabled) Enable/disable With the latch enabled, the interior roll-out comes out with the drawer. With the latch disabled, the interior roll-out does not come out when the drawer is opened. A coin may be used to rotate the latch 80 degrees to enable or disable this feature. Operation (latch activated) Enable/disable Push to release Use coin to enable / disable Dimensions Installation Drawer front center line 7 min. 5 x 6.5 Center on front X X + 7 Dimensions in millimeters Subject to technical modifications without notice. 008 6
Accessories a Screws Deep thread system screws Deep thread wood screws Truss head wood screws Use to attach cabinet profiles Pilot bore Ø5 (/6") hole.5(7/6"), # POZI 66.50HG (/"), # POZI 66.00HG.5(9/6"), # POZI 66.50HG Use to attach cabinet profiles Pilot bore Ø.5 (/") hole #7x/", # Phillips 707N #7x9/6", # Phillips 707N Use to attach rear fixing brackets and drawer bottoms Pilot bore Ø.5 (/") hole #6x/", truss head 6TH Rear mount gallery bracket Side spacer For spacing out TANDEMBOX runners from the cabinet side for clearance on interior roll-out trays 66.00HG Symmetrical rear fixing bracket for drawers deeper than the standard D height. Can be used in combination with any of the standard height rear fixing brackets. Gray (R906) or INOX ZRR.5000 76 (") 6 (/") (-/") 9 (/8") 6 (-/") (/") (/") (/") 6 (-7/6") 8 (/6") 9 (/8") 5 (") 6 (/") Use pcs. per runner on 558 series, and pcs. per runner on all 559 series. Side spacer 6 (-/") T59.570 Universal bracket kit Bumpers POZI DRIVER and bits For bottom mount applications Zinc coated steel bracket - Includes () brackets - Includes (6) M screws 5.5 (") 6 (-7/6") M Cushions drawer closing Self-adhesive back, clear A POZI screwdriver (different from Phillips) is the most crucial tool you can use to assure that full torque is applied to all Blum mounting screws. POZI screws can be identified by the distinctive tick marks located in the center of the screw head recess. Universal bracket kit Installation screws 95.000 6TH 6(/") dia. x.5(/6") 0(/8") dia. x (/8") FX0 SJ5 #x" POZI bit insert # POZI DRIVER /" bit holder #x" POZI bit insert POZI BIT #x POZI DRIVER BIT HOLDER POZI BIT #x Dimensions in millimeters (inch equivalents as noted) 6 Subject to technical modifications without notice. 008
Testing standards i Blum, Inc. is ISO 900 certified which means that you are assured of consistent quality in every Blum product. As with all Blum hardware, TANDEMBOX exceeds the requirements of ANSI- BHMA standards for cycle life, static load and self-closing performance. Contact your local Blum representative for more details. TANDEMBOX drawer systems exceed ANSI/BHMA requirements for Grade rating Dynamic wear test Static load test Side pressure test kg kg kg 00,000 open/close cycles with a total weight of kg (75lb) on a 550 (") drawer. 0 times for 0 seconds each time when completely extended, with a 50 N force applied to the corner of the drawer front. 0 times for 0 seconds each time when completely extended, with a 50 N force applied to the side of the drawer front. Subject to technical modifications without notice. 008 65
Assembly, removal and adjustment Drawer assembly attach with 6TH attach with 6TH Drawer front attachment Drawer front removal Drawer gallery insertion Drawer gallery removal Drawer insertion Drawer removal Side adjustment Cam height adjustment Tilt adjustment 66 Subject to technical modifications without notice. 008
Double-wall BOXSIDE assembly SPACE CORNER assembly attach with 6TH attach with 6TH SPACE CORNER front attachment SPACE CORNER front removal SPACE CORNER with gallery SPACE CORNER insertion SPACE CORNER removal Subject to technical modifications without notice. 008 67
Assembly, removal and adjustment SPACE CORNER with SYNCROMOTION assembly Connecting link SYNCRO front bracket Corner front piece Connecting piece SPACE CORNER with SYNCROMOTION BLUMOTION assembly Roller assembly SPACE CORNER with SYNCROMOTION 5 7 6 8 6 Fold ratchet lever SPACE CORNER with SYNCROMOTION + - 5 + - + - Height Side adjustment Tilt Spring force adjustment - + - + + 68 Subject to technical modifications without notice. 008
Handle assembly (ZIF.7005) Handle and latch assembly (ZIF.7007) Attach Center Attach Center Latch activated Release Toggle activation Latch deactivated 80 Subject to technical modifications without notice. 008 69
Assembly, removal and adjustment Interior front assembly (ZIF.70M0) 0 min. Interior front assembly (ZIF.7B0) 6 5 Interior front assembly (ZIF.7D0 and double wall boxside) 5 8 0 7 9 6 Interior front assembly (ZIF.7D0 and single wall boxside) 5 8 7 9 6 Interior front assembly (ZIF.7D0 and double gallery) 5 8 9 6 7 70 Subject to technical modifications without notice. 008
ORGA-LINE cutlery tray assembly ORGA-LINE utensil tray assembly ORGA-LINE cross divider insertion ORGA-LINE food/bottle storage assembly ORGA-LINE plate holder Subject to technical modifications without notice. 008 7
Assembly aids Cabinet profile template Using the cabinet profile template For determining cabinet profile positions and pilot boring for wood screws. This template can be used with assembled or unassembled cabinets. Locates precise and level fixing points of cabinet profiles. Calibrated metric rail works with DYNALOG for locating profile position.. Determine runner locations from DYNAPLAN or by manual calculation.. Set templates on the bar by the scale.. Clamp assembly to the cabinet side.. Bore Ø.5mm pilot holes for front and middle mounting positions. 5. Fasten runners to cabinet with wood screws. Includes components -: [] Clamp assembly [] Templates [] Calibrated rail, length 000 (9") [] Extension drill bit for Ø.5 (/8") Profile template Ø.5 (/8") drill bit T65.5000.0 DB-.5mm Dimensions in millimeters (inch equivalents as noted) 7 Subject to technical modifications without notice. 008
Universal template Using the universal template Boring template can be used for boring drawer front. Locates all fixing positions. Ø5 (/6") & Ø0 (/8") stop collars included. Ø0 (/8") marking pin included. Universal template ZML.000 Set stops using the calibration. Pre-bore with Ø0mm bit or mark fixing locations. Ø5 (/6") drill bit Ø0 (/8") drill bit DB-5mm DB-0mm Attach INSERTA front fixing brackets and INSERTA gallery. Can mark/bore for multiple galleries. Box system front template Using the box system front template Position front template onto closed drawer. Line up the drawer front and mark the fixing locations with a light tap on either side. Bore Ø0mm holes and at tach INSERTA front fixing brackets. For marking all front fixing bracket positions including drawers with galleries. If galleries are used, place gallery template into rear bracket then adjust rod so it rests on the drawer bottom. Insert gallery marking gauges into front template and line up the drawer front. [] Box system template TANDEMBOX 58/59M ZML.580 [] Gallery marking template TANDEMBOX + gallery ZML.600 Hold the drawer front in place and tap it by hand to transfer the points of the templates to the back of the drawer front. Bore Ø0mm holes and at tach INSERTA front fixing brackets and INSERTA gallery rods. Dimensions in millimeters (inch equivalents as noted) Subject to technical modifications without notice. 008 7
BOXFIX M Features - For all TANDEMBOX heights and lengths - For cabinet widths of 00-00 (-/ to 7-/ ) - For back heights up to 50 (-/ ) BOXFIX M ZMM.50 Using BOXFIX M you can assemble TANDEMBOX faster than ever. Its easy setup, preset stops and comfortable work height all contribute to faster, more efficient assembly of TANDEMBOX plus BLUMOTION drawers. Additional stop MZS.00 Assembly of drawers Runner length and drawer width are set Precision increases efficiency Rear fixing brackets are attached to the drawer back Drawer back, bottom and sides are inserted and secured The drawer bottom is attached to the TANDEMBOX drawer sides using wood screws Set width Attach rear fixing bracket Secure parts Attach drawer profiles 7 Subject to technical modifications without notice. 008
Machines MINIPRESS P - Deluxe boring and insertion machine Features: Front adjustable boring distance with digital counter Pneumatic hold-down clamps Improved boring depth adjustment Improved positioning stops () Tool kit included Dust collection attachment Accepts optional 7 or 8 spindle boring heads Single phase - 0V power Laser center line optional. Three phase - 0V power Laser center line optional. Three phase - 0V power No laser center line option. M5.05.US M5.00.US M5.005.US MINIPRESS P - Standard boring and insertion machine Features: Front adjustable boring distance Improved boring depth adjustment Improved positioning stops () Tool kit included Dust collection attachment Accepts optional 7 or 8 spindle boring heads Single phase - 0V power Optional laser center line, digital counter and hold down clamps. M5.05.UB MINIPRESS M - 0V manual boring and insertion machine Features: 0V power with molded plug (portable) Does not require pressurized air positioning stops included Tool kit included Dust collection attachment Accepts optional 7 or 8 spindle boring heads 0V power Boring distance stop kit optional. No laser center line option. M5.056.US MINIDRILL P -Standard boring machine Features: Front adjustable boring distance Improved positioning stops () Tool kit included Dust collection attachment Accepts optional 7 or 8 spindle boring heads Single phase- 0V power Optional laser center line, digital counter and hold down clamps. Three phase - 0V power Optional laser center line, digital counter and hold down clamps. Three phase - 0V power Optional digital counter and hold down clamps. No laser center line option. M5.05.50 M5.00.50 M5.005.50 Optional items (See Assembly aids brochure for more) Boring distance stop kit (MINIPRESS M only) MZS.00 Laser center line kit Digital counter kit Hold down clamp kit MZR.500.0 MZE.0 M5.070.US Subject to technical modifications without notice. 008 75
Assembly aids 7-spindle head 8-spindle head For line boring and pre-boring holes for Blum hardware. The 7-spindle head bores 7 holes mm apart, parallel to the fence. For use with the Blum MINIPRESS. For line boring and pre-boring holes for Blum hardware. The 8-spindle head bores 8 holes mm apart, perpendicular to the fence. Bores for TANDEMBOX front fixing brackets and galleries. For use with the Blum MINIPRESS.? 7-spindle head MZK.000.US 8-spindle head MZK.8000.US MINISTICK Enables fast setup for drawer front boring. Eliminates the need for multiple fence stops. Includes components - [] RH & LH MINISTICK mechanism [] upper drawer stop [] bottom drawer stop MINISTICK MZS.000 5 5 5 5 st pin - bore location for front bracket 5 rd pin - second bore location for front bracket 5th pin - bore location for INSERTA gallery 5 SYNCROMOTION boring template Essential tool for drawers using SYNCROMOTION To bore the Ø5mm holes for the center SYNCRO bracket mounting locations To bore the Ø5mm holes for the corner front fixing bracket mounting location SYNCROMOTION boring template Part no. ZML.00 Dimensions in millimeters (inch equivalents as noted) 76 Subject to technical modifications without notice. 008
Drill bits Drill bits for the MINIPRESS/MINIDRILL and boring heads. Left handed bits are easily identified by their signature Blum orange color. Ø5mm drill bit (RH) Ø5mm drill bit (LH) Ø0mm drill bit (RH) Ø0mm drill bit (LH) Ø.85mm drill bit (LH) M0.ZB05.D M0.ZB05.D M0.ZB0.0 M0.ZB0.0 Self-centering pilot bit for hand drills. VPB-5 Ø5mm drill bit Ø.85mm self-centering pilot bit Ø0mm drill bit SPACE CORNER profile template Using the SPACE CORNER profile template Mark the cabinet profile height position on the cabinet. Line up the SPACE CORNER profile template and prebore holes. Template for preboring TANDEMBOX profiles in a SPACE CORNER. SPACE CORNER template T65.550 Attach the cabinet profiles. Dimensions in millimeters (inch equivalents as noted) Subject to technical modifications without notice. 008 77
DYNALOG a What is DYNALOG? DYNALOG is cabinet planning software from BLUM for use with the TANDEMBOX drawer system. It contains DYNACAT (an electronic product catalog) as well as DYNAPLAN (software with all important tools for cabinet planning and dimension calculation). In DYNASHOP (shopping basket), you can merge data from both applications into a ready-to-order project. No need to bother with trial applications We have ensured that all DYNALOG planning results will function in the real world. The program will automatically carry out collision checks for all possible installation situations and applications, which saves costly trial applications. Easy to learn DYNALOG makes computer planning easy. It is easy to learn and apply even if you don t use it every day. 78 Subject to technical modifications without notice. 008
Part number index i Page No. 95.000 6 58M70I 9 58M70S 9 58M50I 9, 5, 58M50S 9, 5, 58M00I 9, 5, 58M00S 9, 5, 58M50I 9, 5, 9, 58M50S 9, 5, 9, 58M500I 9, 5, 9,, 9-5 58M500S 9, 5, 9,, 9-5 58M500IG 5, 5 58M500SG 5, 5 58M550I 9, 5, 9,, 9-5 58M550S 9, 5, 9,, 9-5 58M550IG 5, 5 58M550SG 5, 5 59M600I 9, 5, 9,, 7-59M600S 9, 5, 9,, 7-59M650I 9, 5, 9,, 7-59M650S 9, 5, 9,, 7-58N00I 7 58N00S 7 58N50I 7 58N50S 7 58N500I 7 58N500S 7 58N550I 7 58N550S 7 558.70B 9 558.50B 9, 5, 558.00B 7, 9, 5, 558.50B 7, 9, 5, 9, 558.500B 7, 9, 5, 9,, 9-55 558.550B 7, 9, 5, 9,, 9-55 559.50B 9, 5, 9, 559.500B 9, 5, 9,, 9-55 559.550B 9, 5, 9,, 9-55 559.600B 9, 5, 9,, 7-559.650B 9, 5, 9,, 7-606N or 606P 6 6TH 6 66.50HG 6 66.00HG 6 66.50HG 6 707N 6 707N 6 BIT HOLDER 6 DB-0mm 7 DB-.5mm 7 DB-5mm 7 DYNALOG 78 FX0 6 M0.ZB05.D 77 M0.ZB05.D 77 M0.ZB0.0 77 M0.ZB0.0 77 M 6 M5.056.US 75 M5.070.US 75 M5.00.50 75 M5.00.US 75 M5.005.50 75 M5.005.US 75 M5.05.50 75 M5.05.UB 75 M5.05.US 75 MZE.0 75 MZK.000.US 76 MZK.8000.US 76 MZL.00 76 MZR.500.0 75 MZS.000 76 MZS.00 75 MZS.00 7 POZI BIT 6 POZI DRIVER 6 SJ5 6 T59.570 6 T65.5000.0 7 T65.550 77 VPB-5 77 Z0B000S.0 5 Z0D000S 9,, 5, 55 Z0D000S.5 Z0M000S.0 9, 9, 5 Z0M000S.5 Z0N000.6Z 5, 5 Z0N000S.0 7, 5, 5 ZA08A 9, 5, 9, ZD00E0A6 ZM00E0A6 Z6H7SE0, 7 Z6H67SE0, 7 Z6H57SE0, 7 Z6M7SE0 6 Z6M67SE0 6 Z6M57SE0 6 Z7H8I.E 0 Z7H8S.E 0 Z7H68I.E 0, 5, 55 Z7H68S.E 0, 5, 55 Z7H58I.E 0, 5, 55 Z7H58S.E 0, 5, 55 Z7H568I.E 0,, 7 Z7H568S.E 0,, 7 Z7H68I.E 0,, 7 Z7H68S.E 0, 7 Z0H000A 0, 7, 55 Z0H077A 0, 7, 55 ZH00I.0 0 ZH00S.0 0 Z6.C70I 55 Z6.C70S 55 Z6.C50I 55 Z6.C50S 55 ZFI.0BZI6 0 ZFI.0BZI7 0 ZFI.0BZS7 0 ZFZ.8G0I ZIF.7005 9, 6 ZIF.7007 9, 6 ZIF.7008 9, ZIF.70M0 9 ZIF.7B0 5 ZIF.7D0 9, ZML.000 7 ZML.00 ZML.580 7 ZML.600 7 ZMM.50 7 ZRG.09U 6, 9,, ZRG.96V.IC 5, ZRG.6V.IC 5, ZRG.96V.IC 5, 9, ZRG.6V.IC 5, 9,, 5, 55 ZRG.96V.IC 5, 9,, 5, 55 ZRG.56V.IC 5, 9,, 9, ZRG.596V.IC 5, 9,, 9, ZRM.5500 59 ZRR.5000 6 ZRU.00E0.0 6, ZRU.00F0 6, ZRU.00Z0.0 6, ZRU.0BE 6, ZSF.0E.M 7 ZSF.5E.D 9 ZSF.50.0 7, 9, 5, 9,, 9-55 ZSF.90 7, 9, 5, 9,, 9-55 ZSI.00Q ZSI.00SI ZSI.00Q ZSI.00SI ZSI.00SI ZSI.500BIN 0, ZSI.500BIA 0 ZSI.500FI, 6 ZSI.500FI -, 6 ZSI.500KIA 0, ZSI.500MI - ZSI.550BIN 0, ZSI.550BIA 0 ZSI.550FI ZSI.550FI - ZSI.550KIA 0, ZSI.550MI - ZST.500BB 60 ZST.550BB 60 ZSZ.0M0, 6 ZTH.050 6, 0,
Information is also available on these other Blum products: AVENTOS lift systems BLUMOTION for doors Concealed hinges: CLIP top, CLIP, MODUL, and COMPACT DYNAMIC SPACE Machine and assembly aids METABOX drawer system ORGA-LINE organization system POCKET DOOR hardware STANDARD drawer runners SOLO concealed runners TANDEM concealed runners TANDEMBOX plus BLUMOTION drawer system Blum, Inc. 77 Old Plank Rd. Stanley, NC 86 800-8-6788 70-87-5 fax 70-87-0799 sales.us@blum.com www.blum.com Technical specifications subject to change without notice. LIT.00.0.08 008 Printed in USA