DOCUMENT PRELIMINAIRE RELAIS STATIQUE A MOSFET POUR COURANT CONTINU Montage rail DIN Technologie à base de MOSFET dernière génération. Très faible résistance à l état passant. Protection contre les surtensions intégrée. Affichage de la commande (LED verte) Applications : Feux routiers Petits moteurs, électroaimants, luminaires, éléments chauffants Appareils de mesure Page 1/ UK XKLD36 Plage de tension de commande Tension de sortie permanente max. Courant nominal sans dissipateur -3VDC 4V (6V crête) ADC Tensions d utilisation Plage de courant de charge Plage de tension de commande Isolations Connexions Dimensions (LxHxP en mm) Poids 12-24-36VDC to A -3VDC 2.kV Borniers à vis 12.2 x 76.4 x 3 3g Fig. 1 HIGH SIDE WIRING DIAGRAM (Load connected to - ) Fig. 2 LOW SIDE WIRING DIAGRAM (Load connected to + ) D2 selection : VRRM > Uep, IFav > Ie, trr<1µs Red paths should be as short as possible! D2 selection : VRRM > Uep, IFav > Ie, trr<1µs Red paths should be as short as possible! Fig. 3 INTERNAL DIAGRAM Proud to serve you Data given at Tambient=2 C and subject to modification without previous notice
Page 2/ UK CONTROL INPUT CHARACTERISTICS INPUT CIRCUIT Nominal control voltage Ucnom 12-24VDC Nominal control current Icnom 9-2mADC Control voltage range Uc 3VDC Current consumption Ic 7-26mADC See fig. Releasing voltage Ucoffmax 1VDC Max. reverse voltage -Ucmax 3VDC Input impedance Rin See fig. POWER OUTPUT CHARACTERISTICS POWER CIRCUIT Mains Nominal voltage Uenom 12-24-36VDC Mains voltage range Ue -4VDC Non-repetitive peak voltage Uep 6V Overvoltage protection Reverse voltage drop (internal diode) D1 -Ue Pulse = 6W 1.2/µs Permanent =.W.82VDC Maximum nominal currents Ie A Non-repetitive peak overload current @Ie=A @Uc= See fig. 7 for limits Iepeak A @ms See fig. 8 Min. load current Iemin.1mA Max. leakage current Ielk.1mADC @Uep @Tjmax Max. on-state resistance RDSon 14m @Tj=2 C 22.4m @Tj=12 C @Iemax Typ. output capacitance Cout 36pF Junction/case thermal resistance per power element Relay/ambient thermal resistance vertically mounted Rthjc 1K/W @1MHz @VDS=2V @Uc= Total = 1 power elements Rthra 22K/W @ Tra=6 C Relay thermal time constant Tthra 2min @ Tra=6 C Control inputs/power outputs insulation voltage Uimp 2.kV Inputs/case insulation voltage Uimp 2.kV Outputs/case insulation voltage Uimp 2.kV Isolation resistance Rio 1G Isolation capacitance Cio <8pF Maximum junction temperature Tjmax 17 C Storage ambient temperature Tstg -4->+ C Operating ambient temperature Tamb -2->+9 C See fig. 7 Max. case temperature Tc C
Page 3/ UK TIME CHARACTERISTICS Fig. 4 TIME DIAGRAMS TIME CHARACT. Turn on time ton 1µs Turn on delay tdon µs Turn off time toff µs Turn off delay tdoff 1µs Max. On-Off frequency F(on-off) 1 to 7Hz depending on the circuit configuration : please consult us GENERAL INFORMATION Display LED (control) Green MISC. Housing Mounting Noise level Weight UL94V DIN RAIL No audible noise 3g STANDARDS GENERAL Standards Protection level Protection against direct touch CE marking UL, culus and VDE approvals IEC6947-1 IP None Yes Pending E.M.C. IMMUNITY TYPE OF TEST STANDARD LEVEL EFFECT E.S.D. (Electrostatic discharges) EN6-4-2 Pending? Radiated electromagnetic fields EN6-4-3 Pending? Fast transients bursts EN6-4-4 Pending No effect Electric chocks EN6-4- Pending? Voltage drop EN6-4-11 - E.M.C. EMISSION Radiated and conducted disturbances NFEN11 Pending
Page 4/ UK CHARACTERISTIC CURVES Fig. INPUT CHARACTERISTIC Fig. 6 ON-STATE VOLTAGE DROP VS TEMPERATURE Ic (madc) 3 2 2 1 @2 C RDSon (mω) 3 3 2 2 1 1 2 2 3 Uc (VDC) - 1 Junction Temperature ( C) Fig. 7 LOAD CURRENT LIMIT VS TEMPERATURE Permanent current Ie (ADC) 4 WF42 WF32 Power dissipated (W) 3.9 3 27. 3 2.2 2 14 2 8.96 1.4 2.24.6 No heatsink SKH Option 2 3 4 6 7 8 9 1 Ambient temperature ( C) Fig. 8 CURRENT OVERLOAD CHARACTERISTIC (ITSM) Not available
Page / UK DIMENSIONS AND ACCESSORIES Fig. 9 DIMENSIONS 76,4±,4 3 ±,4 29 ±,2 ±,4 12,2 Fig. ACCESSORIES