Ordering number : EN181B SD168 Bipolar Transistor V, A, Low VCE(sat), NPN Single PCP http://onsemi.com Applications Strobe DC-DC converters, relay drivers, hammer drivers, lamp drivers, motor drovers Features Low saturation voltage High hfe Large current capacity Very small size making it easy to provide highdensity, small-sized hybrid IC s Halogen free compliance Specifications Absolute Maximum Ratings at Ta= C Parameter Symbol Conditions Ratings Unit Collector-to-Base Voltage VCBO 6 V Collector-to-Emitter Voltage VCEO V Emitter-to-Base Voltage VEBO 6 V Collector Current IC A Collector Current (Pulse) ICP 8 A Package Dimensions unit : mm (typ) B-4 Top View 4. 1.6 1. SD168G-TD-E SD168G-TD-H SD168F-TD-E SD168F-TD-H Continued on next page. Product & Package Information Package : PCP JEITA, JEDEC : SC-6, SOT-89, TO-4 Minimum Packing Quantity : 1, pcs./reel Packing Type: TD Marking.4. 1. 4..4 TD DK LOT No. RANK 1.. Electrical Connection. 1 1 : Base : Collector : Emitter Bottom View PCP Semiconductor Components Industries, LLC, 1 September, 1 81 TKIM/199TH (KT)/KI/4MW, TS No.181-1/6
SD168 Continued from preceding page. Parameter Symbol Conditions Ratings Unit Collector Dissipation PC mw When mounted on ceramic substrate (mm.8mm) 1. W Junction Temperature Tj 1 C Storage Temperature Tstg -- to +1 C Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the Recommended Operating Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect device reliability. Electrical Characteristics at Ta= C Parameter Symbol Conditions Ratings min typ max Unit Collector Cutoff Current ICBO VCB=V, IE=A 1 na Emitter Cutoff Current IEBO VEB=V, IC=A 1 na DC Current Gain hfe1 VCE=V, IC=.A 1* 6* hfe VCE=V, IC=A 9 Gain-Bandwidth Product ft VCE=1V, IC=mA 1 MHz Output Capacitance Cob VCB=1V, f=1mhz 4 pf Collector-to-Emitter Saturation Voltage VCE(sat) IC=A, IB=6mA mv Base-to-Emitter Saturation Voltage VBE(sat) IC=A, IB=6mA 1. V Turn-ON Time ton ns Storage Time tstg See specified Test Circuit. ns Fall Time tf 4 ns * : The SD168 is classified by.a hfe as follows : Rank E F G hfe 1 to 16 to 8 to 6 Switching Time Test Circuit PW=1μs D.C.=% tr, tf ms IB1 IB OUTPUT INPUT Ω 1Ω VR 1μF 1μF + + Ω VBE= --V VCC=1V IC=1IB1= --1IB=A Ordering Information Device Package Shipping memo SD168G-TD-E PCP 1,pcs./reel Pb Free SD168G-TD-H PCP 1,pcs./reel Pb Free and Halogen Free SD168F-TD-E PCP 1,pcs./reel Pb Free SD168F-TD-H PCP 1,pcs./reel Pb Free and Halogen Free 4 1 8mA 1mA IC -- VCE 6mA 4mA ma ma 1mA 1mA ma. 1.6 1..8.4 1mA IC -- VCE 8mA 6mA 4mA ma I B =..4.6.8 Collector-to-Emitter Current, V CE -- V ITR1 I B =.4.8 1. 1.6. Collector-to-Emitter Voltage, V CE -- V ITR14 No.181-/6
SD168 4 1 IC -- VBE V CE =V DC Current Gain, h FE 1 1 hfe -- IC VCE=V Gain-Bandwidth Product, f T -- MHz 1 1.4.8 1. 1.6. Base-to-Emitter Voltage, V BE -- V ITR1 ft -- IC V CE =1V Output Capacitance, Cob -- pf 1 1 1 1 ITR16 1 Collector Current, I C -- ma Cob -- VCB f=1mhz 1 1 1 1 ITR1 Collector Current, I C -- ma VCE(sat) -- IC I C / I B = 1 1 1 ITR18 1.8 1.6 Collector-to-Base Voltage, V CB -- V PC -- Ta Collector-to-Emitter Saturation Voltage, V CE (sat) -- V.1 Collector Dissipation, P C -- W 1.4 1..8.6.4. Mounted on a ceramic board (mm.8mm) No heat sink.1 1 ITR19 A S O 1 I C I CP.1 DC operation 1ms Single Mounted on a ceramic board (mm.8mm) 1 Collector-to-Emitter Voltage, V CE -- V ITR111 1ms 1ms 4 6 8 1 1 14 16 Ambient Temperature, Ta -- C ITR11 No.181-/6
SD168 Bag Packing Specification SD168G-TD-E, SD168G-TD-H, SD168F-TD-E, SD168F-TD-H No.181-4/6
SD168 Outline Drawing Land Pattern Example SD168G-TD-E, SD168G-TD-H, SD168F-TD-E, SD168F-TD-H Mass (g) Unit.8 * For reference mm Unit: mm. 1. 1.8.9 4 4.. 1. No.181-/6
SD168 ON Semiconductor and the ON logo are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of SCILLC s product/patent coverage may be accessed at www.onsemi.com/site/pdf/patent-marking.pdf. SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Typical parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including Typicals must be validated for each customer application by customer s technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PS No.181-6/6