Lighting Services Inc Job Name Here Fixture Type Here Ordering Information Here Designer/Firm Name Here L UME LEX 0 SERIES 1V LED XTM MM Elegant fixed downlight designed specifically for the most demanding architecture applications. Designed for the Xicato XTM mm LED module up to Watts Extremely tight color consistency (less than 2 MacAdam Ellipses) System efficiency up to lumens/watt Backed by Xicato s Five Year Color Consistency and Lumen Maintenance Warranty 0,000 hour life to 0% lumen output, L0 at F max ambient Choice of color temperature Color Rendering Index (CRI) of either (high) or (standard) Color Fidelity (Rf) (high) or (standard) Gamut Area Index (Rg) (high) or 1 (standard) Choice of lumen outputs (delivered lumens) Tested to LM and LM0 Protocols, TM-0 available Hidden integral electronic driver compatible with reverse phase (ELV compatible) dimmers down to % Field interchangeable optics ( - 0 ) modify the beam spread distribution Accessory holder accepts up to two size-a LSI filters and accessories Integral dimmer available Finishes: LSI Black, White, and Silver Fixture weight: lbs All modules are field replaceable MOUNTING OPTIONS Please review the ORDERING INFORMATION section on the next page on how to specify the following: Lumens/CRI/Wattage Color Temperature Optic - mm/beam spread LX0-XXXXX-XXXXXX-00-XXXXXX Lexan fitting for 1 and 2 circuit LSI track. With On/Off switch. LX0-XXXXX-XXXXXX-G-XXXXXX C-clamp for pipes from / to 2 O.D. With switch, -foot -wire grounding cord and NEMA -1P plug. 1/2 LX0-XXXXX-XXXXXX-00-EDXXXX LX0-XXXXX-XXXXXX-A-XXXXXX Lexan fitting for 1 and 2 circuit LSI track. Integral dimmer (for use with ED dimming driver %). Canopy for permanent mounting on standard octagonal junction boxes. LX0-XXXXX-XXXXXX-LT-LTXXXX Lexan fitting with LumenTalk dimmer (for use with LT dimming driver (<1%). LX0-XXXXX-XXXXXX-2G-XXXXXX Universal fitting for Unistrut Systems and any screw or bolt-up applications. With switch, -foot -wire grounding cord and NEMA -1P plug. 0/1 www.lightingservicesinc.com /1 /1 Other Options (Consult Factory): Stems, specify length ( - 1 ) Custom color, RAL palette Security/Worklite Fixture, use EF as mounting option (track mount only) /1
1/1" 1mm ORDERING INFORMATION Xicato XTM mm Fixture /1" 2mm /1 mm /1" 2mm 2 1/1" 2mm /1" mm /1" 1mm 1. Choose the desired LED Module (TS) for XTM (mm) 2. Choose the numeric code to designate the desired LED Rating Lumens/CRI/Wattage (0-) for 00// (0-) for 00//1 (0-) for 00//22 (-) for 00//22 (-) for 00//2 (-) for 00//. Choose the code to designate the desired Color Temperature (2) for 0K (0) for 000K () for 00K (0) for 000K (V) for Vibrant 000K For other CCT, consult factory. Use the following alpha-numeric code to designate the Optic (N1) for 0mm/ (NR) for 0mm/ (Field Reducer) (N2) for 0mm/ (N) for 0mm/0 (N) for 0mm/0. Select your Mounting Option (00) Track Fitting (LT) Lumentalk Fitting (2G) Unistrut Fitting (G) C-clamp Fitting (A) Canopy Fitting /1" mm. Choose other fixture Options: Coiled Cord is available only with 2G and G mounting options. Change 2G to 2C and G to C. (When a coiled cord is not specified, a straight cord is provided.). Choose the letter code for Dimming Type: (TE) Trailing Edge (Reverse Phase) (%) (ED) Integral Dimming (%) (LT) Lumentalk (<1%) (LT fitting only) () 0-V (%) (A fitting only). Choose the desired Voltage: (1) for 1V (20) for 2-V (2) for 2V. Choose a Finish for your fixture: Black (B) White (W) Silver (S) Example: LX0 - TS - 2 N1-00 - TE 1 B FIXTURE LED MODULE LED RATING COLOR TEMP OPTIC FITTING DIMMING VOLTAGE FINISH Color Temperature & Center Point Tolerance. Don t forget your Accessories! Color Temp Center Point Tolerance 0K 0K +/- 0K 000K K +/- 0K 00K K +/- 0K 000K 000K +/- 0K Chromaticity Specifications Rg- Gamut LED Ra- CRI Rf- Fidelity Area T1-TS - 1 T1-TS - ACCESSORIES Hood SPT A ANG Hood SPT A Backer Ring A Louver Hex A Glass Color Filters A Spread Lens A0, A2, A, A Beam Softener A Light Blocking Screens A01S, A02S, A0S Color and Spread Gels A LX-N-REF-CLR (0mm/ ) LX-NRD-REF-CLR (0mm/ ) Field Reducer LX-N-REF-CLR (0mm/ ) LX-N0-REF-CLR (0mm/0 ) LX-N0-REF-CLR (0mm/0 ) www.lightingservicesinc.com Solid State 0/1
LUMELEX 0 SERIES XICATO XTM MM PERFORMANCE The performance characteristics of the LumeLEX family of products can be customized based on the LED module and the optic (reflector) selected. Each available LED module is defined by four characteristics the color rendering index (CRI), the correlated color temperature (CCT), the power that it uses (watts), and its available lumens. Note that available lumens is a theoretical value that represents the light output of the module on its own no fixture or optic attached. In the LSI part number, the LED module is specified with a letter and a number that immediately follow the product series number. For example, in the part number LX0-TS-2N1-00-TE1B, the TS-2 represents an LED module with an output of 00 lumens, a CRI of, a power usage of watts and a color temperature of 0K. The available optics (reflectors) are characterized by size, beam angle, and in some cases the characteristics of the field angle (narrow or wide). The optic is specified by the two characters that follow the LED designation in the part number. For example, the N1 in TS-2N1-00- TE1B is a 0mm diameter optic that has a -Degree beam. Additional parameters, such as Center Beam Candle Power (CBCP), Delivered Lumens, and Efficiency (Lumens per Watt) are all shown in a table that is organized by LED module and optic combination. CBCP = Center Beam Candle Power LED Module Absolute range of values are +/- % of typical value, and are for all color temperatures Optic (Reflector) Lumens/CRI/Wattage N1 NR N2 N N 00// 00//1 01 2 00//22 01 2 00//22 1 0 1 00//2 1 0 1 00// 200 1 2 1 Delivered Lumens LED Module Optic (Reflector) Lumens/CRI/Wattage N1 NR N2 N N 00// 1 1 00//1 2 1 00//22 2 1 00//22 0 1 00//2 0 1 00// 0 0 1 Efficiency = Lumens Per Watt LED Module Optic (Reflector) Lumens/CRI/Wattage N1 NR N2 N N 00// 2 1 2 2 2 00//1 1 00//22 2 2 2 2 00//22 1 1 00//2 1 2 2 0 00// 1 LED Module Lumens/CRI/Wattage 00// 00//1 00//22 00//22 00//2 00// Letter Code 0-0- 0- - - - Nominal Fixture Power (+/- %), Watts 1 22 22 2 Maximum Inrush Current Amps Minimum Power Factor 0.2 0.2 0.2 0.2 0.2 0.2 Inrush current is instantaneous current drawn by the LED only when fixture is initially powered on or instantaneously changed from full dim to full bright. For more details see Dimming Application Sheet, IS-0. 0/1 www.lightingservicesinc.com
LUMELEX 0 SERIES XICATO XTM MM OPTICS 1 / (2mm) LX-N-REF-CLR (N1) (0mm/ ) Faceted reflectively coated metal optic. Tool-less twist and lock installation. Clear finish. 2 (2mm) LX-NRD-REF-CLR (NR) (0mm/ ) Field reducer. Proprietary field reducing baffle. Clear finish. 2 / (0mm) 2 / (0mm) 1 / (2mm) LX-N-REF-CLR (N2) (0mm/ ) Faceted reflectively coated metal optic. Tool-less twist and lock installation. Clear finish. 1 / (2mm) LX-N0-REF-CLR (N) (0mm/0 ) Faceted reflectively coated metal optic. Tool-less twist and lock installation. Clear finish. 2 / (0mm) 2 / (0mm) 1 / (2mm) LX-N0-REF-CLR (N) (0mm/0 ) Faceted reflectively coated metal optic. Tool-less twist and lock installation. Clear finish. 2 / (0mm) www.lightingservicesinc.com Solid State 0/1
LUMELEX 0 SERIES XICATO XTM MM PHOTOMETRIC DATA LED RATING: - N1-0mm DIA Optic Beam Spread (minimum) Center Beam Candlepower 00 CRI NR- 0mm DIA Optic (FR: Field Reducer) Beam Spread (minimum) Center Beam Candlepower 0 CRI N2-0mm DIA Optic Beam Spread (minimum) Center Beam Candlepower CRI N- 0mm DIA Optic Beam Spread (minimum) 0 Center Beam Candlepower CRI N- 0mm DIA Optic Beam Spread (minimum) 0 Center Beam Candlepower CRI LED RATING: - N1-0mm DIA Optic Beam Spread (minimum) Center Beam Candlepower 000 CRI NR- 0mm DIA Optic (FR: Field Reducer) Beam Spread (minimum) Center Beam Candlepower 00 CRI N2-0mm DIA Optic Beam Spread (minimum) Center Beam Candlepower 00 CRI N- 0mm DIA Optic Beam Spread (minimum) 0 Center Beam Candlepower 00 CRI N- 0mm DIA Optic Beam Spread (minimum) Center Beam Candlepower 0 CRI All Max. Footcandles at 0 Beam Axis All Max. Footcandles at 0 Beam Axis LED RATING: - N (0 ) 0 11 2 2 1 LED RATING: - N (0 ) 1 2 1 0 0 2 1 1 N2 ( ) 1 0 2 2 1 1 NR ( ) FR 0 2 0 0 1 1 1 0 0 2 2 22 1 1 1 N1 ( ) 000 1 1 2 0 0 1 0 2 2 2 2 All Distances in Feet 2 0 2 Photometric Data based on LED Rating: - (00 Lumens/CRI/2watts) N (0 ) 0 2 2 1 0 1 1 2 1 1 N (0 ) 00 0 22 2 1 2 22 1 1 1 N2 ( ) 00 2 1 2 1 1 2 2 1 1 1 NR ( ) FR 00 0 1 00 1 0 2 1 2 2 1 2 2 2 N1 ( ) 000 000 2222 1 00 0 2 0 1 2 2 0 1 2 All Distances in Feet 2 0 2 1 2 1 1 1 1 1 1 22 2 2 2 1 2 1 1 1 1 1 1 22 2 2 2 Photometric Data based on LED Rating: - (00 Lumens/CRI/2watts) 0/1 www.lightingservicesinc.com
LUMELEX 0 ACCESSORIES HOOD SPT A 2 inch deep hood BACKER RING A Stainless steel ring to hold gel when no other size A accessories are being used. ANG HOOD SPT A 2 inch deep angled hood 1. LIGHT BLOCKING SCREENS A Stainless steel mesh screens used alone or in combinations will block from approximately % to 0% of the transmitted light without changing color temperature of the light. No. % of Light Blocked A01S A02S 0 A0S 0 SPREAD LENSES AND BEAM SOFTENER No. Description % of Light Transmission 0 Spread Lens/Clear ( X 0 ) 2 Spread Lens/Clear ( X 0 ) Spread Lens/Clear (0 X 0 ) Spread Lens/Clear ( X 0 ) Beam Softener/Clear 0 ( X ) LOUVER HEX A 1/ thick Hexcell black metal louver used for thin profile. 1. Figures vary based upon LED Module/Optic being used and relationship of screen(s) to LED Module/Optic and to each other. 0/1 www.lightingservicesinc.com
LUMELEX 0 SERIES GELS As the foremost innovator in accent lighting, LSI offers a complete range of pre-cut Gels to modify the spread and color of light for the LumeLEX LED Series. LumeLEX SPREAD GELS (FOR LumeLEX 0) Size: A ( mm diameter) Spread Gel GEL-L1-A GEL-L-A GEL-L-A GEL-L-A GEL-L0-A GEL-L0-A GEL-L0-A GEL-L0-A GEL-L0B-A GEL-L0B2-A GEL-L0B1-A GEL-L0B-A GEL-LB-A GEL-L0B0-A GEL-R1-A 1 Spread Gel Spread Gel Spread Gel Spread Gel 0 Spread Gel 0 Spread Gel 0 Spread Gel 0 Spread Gel 0 by Spread Gel 0 by 0.2 Spread Gel 0 by 1 Spread Gel 0 by Spread Gel by Spread Gel 0 by 0 Spread Gel Beam Softener LumeLEX COLOR GELS (FOR LumeLEX 0) Size: A ( mm diameter) GEL-R2-A GEL-R-A GEL-R-A GEL-R-A GEL-R1-A GEL-R-A GEL-R2-A GEL-R2-A GEL-R2-A GEL-R-A GEL-R2-A GEL-R1-A GEL-R2-A GEL-R1-A GEL-R-A GEL-R-A GEL-R1-A GEL-R-A GEL-R-A GEL-R1-A GEL-R0-A Gel Color Bastard Amber Pale Yellow Straw Straw Tint Medium Straw Golden Amber Orange Red Light Red Medium Red Lavender Booster Blue Sea Blue Azure Blue Primary Green Light Grey Medium Grey Light Frost Tough Silk Lt. Hamburg Frost Blue Diffusion Rose Gold Size: A ( mm diameter) Gel Color GEL-R-A Canary GEL-R-A Half Blue GEL-R1-A Shell Pink GEL-R-A Sapphire Blue GEL-R-A Pale Grey GEL-R01-A Storaro Red GEL-R0-A Storaro Green GEL-R0-A Storaro Violet GEL-R2-A Full Blue GEL-R-A Third Blue GEL-R-A Eighth Blue (Boosts 0K to 00K) GEL-R1-A Tough 1/ Minusgreen GEL-R-A Roscosun (1/ CTO) (Reduces 00K to 00K) GEL-R1-A Full Straw (CTS) GEL-R-A Quarter Straw (CTS) GEL-R0-A CalColor 0 Cyan GEL-R1-A CalColor 1 Green GEL-R0-A CalColor 0 Green GEL-R0-A CalColor 0 Pink GEL-R0-A CalColor 0 Pink GEL-R0-A CalColor 0 Lavender * Backer Ring A required to hold gels when no other rimmed A accesories are used. 0/1 www.lightingservicesinc.com
COLOR MEDIA COLOR FILTERS As the foremost innovator in accent lighting, LSI offers a complete range of permanent fade-free glass color filters, which are available in nine stock diameters. All glass color filters are rimmed in a seamless aluminum ring and are slotted for heat expansion. Size Diameter LSI Fixture Series AAA 2 / LumeLEX /0/1/, SSLCX1, SSLGR1, LumeLEX MAR-S AA LumeLEX 2 (with LX2-Holder or LX2-Barndoor), LumeLEX 2, LumeLEX, LumeLEX, A 1/2 LumeLEX 0, SSL20, SSLCX0, SSLGR0CL, SSLGR, B 1/ LumeLEX MAR-L C / LumeLEX, LumeLEX, SSL2, SSLCX, SSLCX, SSLGRCL Special Glass Color Filters LSI will fabricate, on special order, glass color filters in most sizes and shapes. FS Color Filter Samples To facilitate selection of glass color filters, LSI supplies a complete set of 1 / X 1 / labeled glass and dichroic samples in a handy carrying case. 1 % of Light No. Color Transmission 02 Medium Pink 0 Deep Pink 0 Flesh Pink 0 Pale Lavender 1 0 Surprise Pink 1 0 Lilac Warm Red Strawberry Ruby Magenta 1 1 Light Amethyst 2 1 Medium Amethyst 1 1 Deep Amethyst 1 Olive 1 1 Light Green Medium Green 2 Deep Green 22 Silver green 2 Yellow Green 2 Emerald Green 2 Light Turquoise 2 Medium Turquoise 0 2 Deep Turquoise 1 2 Light Blue 0 Medium Blue 2 Daylight Gene Moore Blue 1 Grey Light Blue Green 1 Light Amber 0 Medium Amber 1 Deep Amber 2 Straw Gold Canary Yellow Lemon 1 Pumpkin 2 Tangerine Orange 2 Pink Gold 0 Bronze 1 Brass 2 Autumn Tan Leaf Brown 1 Butter Pecan Toasted Almond 1 Notes: 1. Values given are approximate due to slight variations in glass color and thickness. 0/1 www.lightingservicesinc.com
COLOR MEDIA DICHROIC COLOR FILTERS In addition to our complete line of glass color filters, LSI now offers dichroic glass color filters that achieve purer, more saturated, richer color by selective wavelength transmission. Since these filters reflect rather than absorb the unwanted color wavelengths, a higher intensity of colored light can be obtained with fewer or lower wattage fixtures. In addition, this selective transmission allows for very accurate color matching from filter to filter. All standard LSI filter sizes are available in a wide palette of well chosen dichroic colors that can be used with all LSI fixtures that accept accessories. LSI dichroic glass color filters have the added benefit of being rimmed for extra durability to allow for frequent usage without fear of breakage or edge chipping. Size Diameter LSI Fixture Series AAA 2 / LumeLEX /0/1/, SSLCX1, SSLGR1, LumeLEX MAR-S AA LumeLEX 2 (with LX2-Holder or LX2-Barndoor), LumeLEX 2, LumeLEX, LumeLEX, A 1/2 LumeLEX 0, SSL20, SSLCX0, SSLGR0CL, SSLGR, B 1/ LumeLEX MAR-L C / LumeLEX, LumeLEX, SSL2, SSLCX, SSLCX, SSLGRCL Special Glass Color Filters LSI will fabricate, on special order, dichroic glass color filters in most sizes and shapes not exceeding a diameter circle overall. FS Color Filter Samples To facilitate selection of glass color filters, LSI supplies a complete set of 1 / X 1 / labeled glass and dichroic samples in a handy carrying case. Technical Data Dichroic color filters are created in a vacuum chamber by multi-layer vapor deposits of different minerals onto low expansion, chemically resistant Borosilicate glass. Deposits are made in alternating layers of varying microscopic thickness which allow very narrow color wavelengths to be selectively transmitted and all other wavelengths to be reflected. LSI does not recommend using dichroic color filters with lamps or fixtures that have beam spreads greater than 0 because a secondary color aura is created by the wide angular transmitted wavelengths that are different than the desired color wavelength. Since there is mainly transmission and reflection of the color wavelengths by the dichroic filter and very little absorption, the dichroic filter can be used with many high temperature lights that normally would not accept color filters. % of Light No. Color Transmission 01 Light Pink 02 Medium Pink 0 Hot Pink 0 Pale Pink Deep Magenta 2 Lavender 2 Vivid Magenta 1 Lavender Accent 1 Lilac 1 Purple Fusion Sky Blue Sea Blue 22 Cyan 2 Light Blue Green 0 2 Primary Blue 2 2 Medium Red Blue 1 2 Deep Purple 1 2 Peacock Blue 2 Mediterranean Blue 2 Boost Blue 1 0 Light Yellow Green 1 Fern Green 2 Turquoise Primary Green 1 Industrial Green 0 Yellow 0 1 Amber 1 2 Amber Blush Bastard Amber 1 Goldenrod Bright Straw 0 Medium Orange 1 1 Orange 0 Flame Red 2 1 Primary Red 2 www.lightingservicesinc.com Solid State 0/1