HIGH POWER LED LIGHTS LED Flood Lights LED Floodlights operate efficiently and save power but also reduce maintenance and service costs as a result of their long life. Conventional floodlights require frequent lamp replacement and routinely need service during critical work periods. LED Floodlights will help save costs and increase efficiency by ensuring that work will never be stopped due to missing, broken, or burned out bulbs. Since LED Floodlights are not vibration sensitive nor do they have a light source that requires replacement, an extremely long life cycle is guaranteed. Additionally, LED Floodlights operate at a fraction of the temperature that conventional floodlights do and, therefore, are much safer to work with. Our Floodlights are manufactured using the newest and most up to date components available. The LED Floodlights use ceramic base and chip technology. The drivers are rubber mounted to vibration resistant housings. All fasteners, rings, and nuts, including the bracket, are made of high-quality marine grade A4 316 stainless steel. Floodlights are available in a variety of wattages from 10-80 watts, the halogen equivalent of 50-700 watts. A special ventilating gland is used in our manufacturing process to ensure that the air pressure inside the LED Floodlight housing will always be the same as the surrounding environment. This prevents fogging on both the inside and outside of the glass due to temperature differences. The attractive grey or white finish is achieved by using a double powder coat process, which eliminates the potential for corrosion from harsh or saltwater environments. All gaskets are specially designed and manufactured for use in harsh environments, and are saltwater, oil, and lubricant resistant. The high quality components used in the construction of our LED Floodlights ensures a lifetime of maintenance free performance.
HIGH POWER LED LIGHTS 10 Watt LED Flood Light 1.000 Lumens in Total FL020201-LV to FL020212-HV 1x 10 Watt Ceramic LED 10 Watt 100 Lms./ Watt Beam Angle: 80 3200K Warm White or Colour Rendering Index: >80 CRI 10V-30V/DC Low Power Version or AC85V-265V 50~60Hz High Power Version Aluminium: ZL102 Mn0.2~0.5, mg<=0.25, Si<=0.65 Affix Materials & mounting Bracket : A4 316 Stainless Steel 4mm 0.16 IP67 Dimensions: 114,5mm x 86 mm x 89mm (W x H x D) 4,55 x 3,4 x 3,5 (W x H x D) CE Certificate Number: B-E09110908 EN 55015: 2006+A1: 2007, SAA Certified Grey or White Finish
HIGH POWER LED LIGHTS 30 Watt LED Flood Light 3.000 Lumens in Total FL030304-HV to FL030314-LV 1x 30 Watt Ceramic LED 30 Watt 100 Lms./ Watt Beam Angle: 100 Colour Rendering Index: >80 CRI 10V-30V/DC Low Power Version or AC100V-305V 50~60Hz High Power Version Aluminium: ZL102 Mn0.2~0.5, mg<=0.25, Si<=0.65 Affix Materials & mounting Bracket : A4 316 Stainless Steel 4mm 0.16 IP67 Dimensions: 225mm x 185mm x 135mm (W x H x D) 8,85 x 7,3 x 5,3 (W x H x D) CE Certificate Number: B-E09110908 EN 55015: 2006+A1: 2007, SAA Certified Grey or White Finish
HIGH POWER LED LIGHTS 50 Watt LED Flood Light 5.000 Lumens in Total FL050506-HV to FL050516-LV 1x 50 Watt Ceramic LED 50 Watt 100 Lms./ Watt Beam Angle: 100 Colour Rendering Index: >80 CRI 10V-30V/DC Low Power Version or AC100V-305V 50~60Hz High Power Version Aluminium: ZL102 Mn0.2~0.5, mg<=0.25, Si<=0.65 Affix Materials & mounting Bracket : A4 316 Stainless Steel 4mm 0.16 IP67 Dimensions: 290mm x 236mm x 160mm (W x H x D) 11,4 x 9,3 x 6,3 (W x H x D) CE Certificate Number: B-E09110908 EN 55015: 2006+A1: 2007, SAA Certified Grey or White Finish
HIGH POWER LED LIGHTS 80 Watt LED Flood Light 8.000 Lumens in Total FL070707-HV & FL070717-HV 1x 80 Watt Ceramic LED 80 Watt 100 Lms./ Watt Beam Angle: 80 Colour Rendering Index: >80 CRI AC100-305V 50~60Hz High Power Version Aluminium: ZL102 Mn0.2~0.5, mg<=0.25, Si<=0.65 Affix Materials & mounting Bracket : A4 316 Stainless Steel 4mm 0.16 IP67 Dimensions: 285mm x 360mm x 115mm (W x H x D) 11,2 x 14,2 x 4,5 (W x H x D) CE Certificate Number: B-E09110908 EN 55015: 2006+A1: 2007, SAA Certified Grey or White Finish
NEW HIGH POWER LED LIGHTS 80 Watt LED Flood Light 10.400 Lumens in Total FLHQ-080-39GR-05HV to FLHQ-080-39GR-12HV 1 x 80 Watt Ceramic LED 80 Watt 140 Lms./ Watt Beam Angle: 50, 90 or 120 Colour Rendering Index: >85 CRI AC100-305V 50~60Hz Aluminium: ZL102 Mn0.2~0.5, mg<=0.25, Si<,<=0.65 Affix Material & Mounting Bracket: A4 316 Stainless Steel 4mm - 0.16 IP67 Dimensions: 322mm x 391mm x 114mm (W x H x D) 12,7 x 15,4 x 4,5 (W x H x D) CE Certificate Number: B-E09110908 EMC Directive 204/204108/EC EN 55015: 2006+A1: 2007
NEW HIGH POWER LED LIGHTS 120 Watt LED Flood Light 15.600 Lumens in Total FLHQ-120-39GR-05HV to FLHQ-120-39GR-12HV 1 x 120 Watt Ceramic LED 120 Watt 140 Lms./ Watt Beam Angle: 50, 90 or 120 Colour Rendering Index: >85 CRI AC100-305V 50~60Hz Aluminium: ZL102 Mn0.2~0.5, mg<=0.25, Si<,<=0.65 Affix Material & Mounting Bracket: A4 316 Stainless Steel 4mm 0.16 IP67 Dimensions: 322mm x 391mm x 114mm (W x H x D) 12,7 x 15,4 x 4,5 (W x H x D) CE Certificate Number: B-E09110908 EMC Directive 204/204108/EC EN 55015: 2006+A1: 2007
NEW HIGH POWER LED LIGHTS 180 Watt LED Flood Light 23.400 Lumens in Total FLLD-180-39GR-02HV & FLLD-180-39GR-06HV 1 x 180 Watt Ceramic LED 180 Watt 130 Lms./ Watt Beam Angle: 20 & 60 Colour Rendering Index: >85 CRI AC100-305V 50~60Hz Aluminium: ZL102 Mn0.2~0.5, mg<=0.25, Si<,<=0.65 Affix Material & Mounting Bracket: A4 316 Stainless Steel 6mm 0.24 IP67 Dimensions: 20 360mm x 358mm x 306mm 14.2 x 14.1 x 12.1 60 360mm x 358mm x 187mm 14.2 x 14.1 x 7.4 TUV Certified UL Certified SAA Certified *UL certification available on request
NEW HIGH POWER LED LIGHTS 400 Watt LED Flood Light 52.000 Lumens in Total FLLD-400-39GR-02HV & FLLD400-39GR-06HV 1 x 400 Watt Ceramic LED 400 Watt 130 Lms./ Watt Beam Angle: 20 & 60 Colour Rendering Index: >85 CRI AC100-305V 50~60Hz Aluminium: ZL102 Mn0.2~0.5, mg<=0.25, Si<,<=0.65 Affix Material & Mounting Bracket: A4 316 Stainless Steel 6mm 0.24 IP67 Dimensions: 20 671mm x 405mm x 374mm 26.4 x 15.9 x 14.7 60 671mm x 405mm x 204mm 26.4 x 15.9 x 8.1 TUV Certified UL Certified SAA Certified *UL certification available on request
MULTI-PURPOSE LED UTILITY LIGHT OCEANUS 2.520 (white circuit) Lumens in Total The Oceanus LED utility light is designed to replace fluorescent fixtures in applications where long life and low power consumption are important considerations. 18Watts of power provides increased illumination without increasing power consumption. LED light output is available in the following configurations and voltages: Natural White 3900K in 85V-265V/AC or 10-30V/DC Natural White 3900K plus a small RED circuit for Night Time Illumination in 85V-265V/AC or 10-30V/DC CRI Color Rendering Index of >80CRI provides excellent color rendering and Natural Light appearance. Long service life ensures low operating costs and reduces maintenance costs. This utility light can be installed in either surface mount or recessed mount configuration. MPFL-010102-HV to MPFL-010103-LV SMD 18Watt 18 Watt 140 Lms./Watt Beam Angle: 160 + Red Circuit Colour Rendering Index: >80 CRI 10V-30V/DC Low Power Version & AC85V-265V 50~60Hz High Power Version Aluminium & Polycarbonate IP55 White Exterior Dimensions: Surface Mount: 445mm x 175mm (17,5 x 6,9 ) Recessed Mount: 403mm x 142mm (15,9 x 5,6 ) Installed Height Dimensions: 35mm (1,4 ) 20mm (0,8 ) Cut Out for Flush Mount: 370mm x 125mm (14,6 x 4,9 ) EN 55015: 2006+A1: 2007 EN 61000-3-2: 2006/A2: 2009 EN 61000-3-3: 2008
LED ROBUST TRI-PROOF LIGHT 30 & 60 Watt LED 30Watt 3.900 Lumens in Total 60Watt 7.800 Lumens in Total The LED Robust Tri-Proof Light is designed to replace fluorescent fixtures in applications where long life and low power consumption are important considerations. Available in 600mm, 2ft 30Watt and 1200mm, 4ft 60Watt Large Beam Angle 230 CRI Color Rendering Index of >85CRI provides excellent color rendering and natural light appearance Long service life ensures low operating costs and reduces maintenance costs Low profile fitting High impact cover IK10 5 years limited warranty RTPL-30W-39-60-HV & RTPL-60W-39-120-HV SMD 30Watt (600mm, 2ft) or 60Watt (1200mm, 4ft) 30Watt or 60Watt 130Lms./Watt Beam Angle: 230 Colour Rendering Index: >85 CRI AC85V-265V 50~60Hz Hard Anodized Aluminium, Polycarbonate & A4 316 Stainless Steel Parts IP66 Dimensions: 30Watt 600mm x 105mm x 100mm 23.6 x 4.1 x 3.9 60Watt 1200mm x 105mm x 100mm - 47.2 x 4.1 x 3.9 EN 55015: 2006/A2: 2009; EN 61000-3-3: 2008
30 & 70 Watt LED LED Curved Tri-Proof Light 30Watt 3.900 Lumens in Total 70Watt 9.100 Lumens in Total The LED Curved Tri-Proof Light is designed to replace fluorescent fixtures in applications where long life and low power consumption are important considerations. Available in 600mm, 2ft 30Watt and 1200mm, 4ft 70Watt Large Beam Angle 230 CRI/ Color Rendering Index of >80CRI provides excellent color rendering and natural light appearance Long service life ensures low operating costs and reduces maintenance costs Low profile fitting High impact cover IK10 CTPL-30W-39-60-LV, CTPL-30W-39-60-HV and CTPL-70W-39-120-HV SMD 30Watt (600mm, 2ft) or SMD 70Watt (1200mm, 4ft) 30Watt or 70Watt 130 Lms./Watt Beam Angle: 230 Colour Rendering Index: >80 CRI 10-30V/DC (600mm, 2ft 30Watt) or AC85-265V 50~60Hz Hard Anodized Aluminium, Polycarbonate & A4 316 Stainless Steel Parts IP65 Dimensions: 30Watt 600mmx100mmx50mm 23.6 x 0.39 x 0.19 70Watt 1200mmx100mmx50mm 47.24 x 0.39 x 0.19 EN 55015: 2006+A1: 2007 UL 1598 & UL 8750
ATEX 40 Watt LED Flood / Canopy Light 40Watt 5.200 Lumens in Total The LED Flood/Canopy Light is available in a 40, 80 and 120Watt version. The light is made of high quality materials and uses a special reflector which prevent blinding when facing the light just of center. The lens is made of the high impact glass. The light is ATEX Ex explosion proof certified for Europe, manufactured to all CE standards and UL 1598 & UL 8750 certified for the United States. The high lumen output and the high color rendering index provides an excellent natural appearance. FLEX-040-39GR-HV 24pcs USA Bridgelux Chip 40Watt 130 Lms./ Watt Beam Angle: 80 Colour Rendering Index: >80 CRI AC90-305V 50~60Hz Aluminium: ZL102 Mn0.2~0.5~mg<=0.25~Si<=0.65 Affix Material & Mounting Bracket: A4 316 Stainless Steel IP68 Highest Ingress Protection Rating Dimensions: 200mm x 200mm x 130mm (W x H x D) 7.85 x 7.85 x 5.1 (W x H x D) EN 55015: 2006+A1: 2007, Anti Explosive LED Fixture II 2G Ex eb mb IIA T4 GB III 2D Ex tb IIIC T(95 ) Db ATEX Explosion Proof Certified for Europe Cert.No.: IEP 14 ATEX 0219 UL 1598 & UL 8750
ATEX 80 Watt LED Flood / Canopy Light 80Watt 10.400 Lumens in Total The LED Flood/Canopy Light is available in a 40, 80 and 120Watt version. The light is made of high quality materials and uses a special reflector which prevent blinding when facing the light just of center. The lens is made of the high impact glass. The light is ATEX Ex explosion proof certified for Europe, manufactured to all CE standards and UL 1598 & UL 8750 certified for the United States. The high lumen output and the high color rendering index provides an excellent natural appearance. FLEX-080-39GR-HV 60pcs USA Bridgelux Chip 80Watt 130 Lms./ Watt Beam Angle: 80 Colour Rendering Index: >80 CRI AC90-305V 50~60Hz Aluminium: ZL102 Mn0.2~0.5~mg<=0.25~Si<=0.65 Affix Material & Mounting Bracket: A4 316 Stainless Steel 4mm 0.16 IP68 Highest Ingress Protection Rating Dimensions: 300mm x 300mm x 150mm (W x H x D) 11.8 x 11.8 x 5.9 (W x H x D) EN 55015: 2006+A1: 2007, Anti Explosive LED Fixture II 2G Ex eb mb IIA T4 GB ATEX Explosion Proof Certified for Europe III 2D Ex tb IIIC T(95 ) Db UL 1598 & UL 8750 Cert.No.: IEP 14 ATEX 0219
ATEX 120 Watt LED Flood / Canopy Light 120Watt 15.600 Lumens in Total The LED Flood/Canopy Light is available in a 40, 80 and 120Watt version. The light is made of high quality materials and uses a special reflector which prevent blinding when facing the light just of center. The lens is made of the high impact glass. The light is ATEX Ex explosion proof certified for Europe, manufactured to all CE standards and UL 1598 & UL 8750 certified for the United States. The high lumen output and the high color rendering index provides an excellent natural appearance. FLEX-120-39GR-HV 96pcs USA Bridgelux Chip 120Watt 130 Lms./ Watt Beam Angle: 80 Colour Rendering Index: >80 CRI AC90-305V 50~60Hz Aluminium: ZL102 Mn0.2~0.5~mg<=0.25~Si<=0.65 Affix Material & Mounting Bracket: A4 316 Stainless Steel 4mm 0.16 IP68 Highest Ingress Protection Rating Dimensions: 400mm x 400mm x 160mm (W x H x D) 15.8 x 15.8 x 6.3 (W x H x D) EN 55015: 2006+A1: 2007, Anti Explosive LED Fixture II 2G Ex eb mb IIA T4 GB III 2D Ex tb IIIC T(95 ) Db ATEX Explosion Proof Certified for Europe Cert.No.: IEP 14 ATEX 0219 UL 1598 & UL 8750
3Watt LED Chart Light White/RED both Colors Dimmable with 50cm Flexible Gooseneck The LED Chart Light is designed for quick and convenient use during night time operations. With just one switch you can switch from the white light to the red light for night illumination to prevent destroying your night vision. Both white and red colors are dimmable. When the light is dimmed in white and changed to red, the red light also comes on in a dimmed mode. As the light is powered by LED it does not generate a lot of heat and van easily be changed in position by the 50cm long flexible gooseneck without burning your hand. As the LED s are not sensitive for vibrations long life time is guaranteed. CHFL-3-39/R-BL-LV SMD 3Watt 100 Lms./ Watt Beam Angle: 120 & Red LED both dimmable 10-30V/DC Aluminium IP44 EN 55015: 2006/A1: 2007; EN 61000-3-3: 2008
15, 21 & 30 Watt LED Down Lights The Recessed LED Down Light is designed to replace PLC Down Lights in applications where long life and low power consumption are important considerations. Available in 15, 21 and 30Watt Beam Angle 140 Easy installation with spring clips CRI Natural Light Color Rendering Index of >85CRI provides excellent color rendering and Natural Light appearance Long service life ensures low operating costs and reduces maintenance costs. RLDL-15-39WH-HV, RLDL-21-39WH-HV & RLDL-30-39WH-HV 1piece Sharp COB LED 15, 21 or 30Watt 15Watt, 21Watt or 30Watt Efficiency: >95% 100 Lms./ Watt Beam Angle: 140 Colour Rendering Index: >85 CRI AC90-305V 50~60Hz Aluminium: ZL102 Mn0.2~0.5~mg<=0.25~Si<=0.65 IP44 Powder Coated White Mounting: Spring clip Dimensions: Ø140 x 60mm 15Watt, Ø190 x 60mm 21Watt, Ø230 x 80mm 30Watt Ø5,5 x 3,2 15Watt, Ø7,5 x 3,2 21Watt and Ø9 x 3,2 30Watt EN 55015: 2006+A1: 2007,
12Watt & 18Watt Ultra Slim LED Ceiling Light 12Watt 1.200 Lumens in Total 18Watt 1.800 Lumens in Total The Ultra Slim LED Ceiling Lights are designed to replace incandescent fixtures in applications where long life and low power consumption are important considerations. Large Beam Angle 140 CRI Color Rendering Index of >80DRI provides excellent color rendering and natural light appearance Long service life ensures low operating costs and reduces maintenance costs Low profile fitting only 42mm/1.65 height High impact cover IK10 These LED ceiling lights can be installed in either surface mount or recessesed mount configuration USLC-12W-30-SQ-HV & USLC-18W-30-SQ-HV SMD 12Watt 250x250mm & SMD 18Watt 300x300mm 12Watt & 18Watt 100 Lms./ Watt Beam Angle: 160 3000K Warm White Colour Rendering Index: >85 CRI AC90-305V 50~60Hz Polycarbonate Lens & Aluminium Back Side Impact Rating: IK10 IP55 Exterior Dimensions: Surface Mount: 12Watt Square 250mm x 250mm 9.85 x9.85 18Watt Square 300mm x 300mm 11.8 x11.8 Recessed Mount: 12Watt Square 230mm x 230mm 9.06 x9.06 18Watt Square 280mm x 280mm 11.03 x11.03 Installed Height Dimensions: Surface Mount: 12Watt Square 40mm 1.58 18Watt Square 40mm 1.58 Recessed Mount: 12Watt Square 24mm 0.95 18Watt Square 24mm 0.95 Cut Out for Recessed Mount: 12Watt Square 13.5mm 0.54 18Watt Square 13.5mm 0.54 EN 55015: 2006/A1: 2007; EN 61000-3-3: 2008