Standard drawer runner program i 230M Single extension, Blumatic self-closing drawer runners s: 250mm (10") to 650mm (26") 230 series drawer runners Cabinet profile Drawer profile Rear mount sockets available for frame applications Single extension, bottom mounted Durable epoxy coating in cream or white Smooth running synthetic rollers on tempered steel axles Captive RH profiles/tolerance LH profiles 1/2" side clearance Double warning lift out stop 230E Single extension drawer runners with stay-closed detents s: 700mm (28") to 800mm (32") 230M series have Blumatic self-closing action. Angled drawer and cabinet profiles create a parallel drop 3/32". 230E series have stay-closed detents in the drawer profiles that hold the drawer in the closed position. Cabinet profile Drawer profile Rear mount sockets available for frame applications 430E Full extension drawer runners with stay-closed detents s: 250mm (10") to 800mm (32") Rear mount sockets are not available for 430 series. For frame cabinets, block out under cabinet profiles. 430 series drawer runners Cabinet profile Intermediate profile Drawer profile Full extension, bottom mounted Durable epoxy coating in cream or white Smooth running synthetic rollers on tempered steel axles Double captive profiles 1/2" side clearance Lock out stops to prevent drawer removal Intermediate profiles lock out for easy drawer installation 1-1/4" over extension Detents in the drawer and intermediate profiles hold the drawer closed Millimeter to inch equivalents 1 1.5 2 3 4 5 5.5 6 7 8 9 9.5 10 11 12 13 13.5 14 15 16 17 17.5 18 19 20 20.5 21 22 23 24 24.5 25.4 1 17 /32 1 /16 3 /32 1 /8 5 /32 3 /16 7 1 /32 /4 9 /32 5 /16 11 /32 3 /8 13 /32 7 /16 15 /32 1 /2 /32 9 /16 19 /32 5 /8 21 /32 11 /16 23 /32 3 /4 25 /32 13 /16 27 /32 7 /8 29 /32 15 /16 31 /32 1 3
STANDARD 230M Series Bottom mounted single extension drawer runners Specifications Runner 230M6500 230M6000 230M5500 230M5000 230M4500 230M4000 230M3500 230M3000 230M2500 Nominal Inches 26" 24" 22" 20" 18" 16" 14" 12" 10" Frame Cabinet * Maximum 714 664 614 564 514 464 414 364 314 (28 1 /8") (26 1 /8") (24 3 /16") (22 3 /16") (20 1 /4") (18 1 /4") (16 1 /4") (14 5 /16") (12 5 /16") 677 627 577 527 477 427 377 327 277 (26 11 /16") (24 11 /16") (22 3 /4") (20 3 /4") (18 13 /16") (16 13 /16") (14 13 /16") (12 7 /8") (10 7 /8") Panel Cabinet * 653 603 553 503 453 403 353 303 253 (25 3 /4") (23 3 /4") (21 13 /16") (19 13 /16") (17 7 /8") (15 7 /8") (13 7 /8") (11 15 /16") (9 15 /16") Suggested Drawer 650 600 550 500 450 400 350 300 250 (25 5 /8") (23 5 /8") (21 11 /16") (19 11 /16") (17 3 /4") (15 3 /4") (13 3 /4") (11 13 /16") (9 13 /16") * For overlay drawer fronts. Space requirements for inset drawers will vary according to front thickness. A trial is recommended. ** At suggested drawer length. Extension Loss** 127 120 110 102 95 85 85 85 59 (4 15 /16") (4 11 /16") (4 5 /16") (4") (3 3 /4") (3 3 /8") (3 3 /8") (3 3 /8") (2 5 /16") Cabinet & Drawer 650 600 550 500 450 400 350 300 250 (25 5 /8") (23 5 /8") (21 11 /16") (19 11 /16") (17 3 /4") (15 3 /4") (13 3 /4") (11 13 /16") (9 13 /16") 96 128 128 96 128 37 9 2 Colors: White or R901 cream 230M6500 (26") 230M6000 230M5500 (24") (22") 64 230M5000 230M4500 (20") (18") 230M Rear Mount Socket 602320 602300 602301 L&R set RH socket LH socket 96 64 32 192 230M4000 230M3500 230M3000 230M2500 (16") (14") (12") (10") IMPORTANT: The Blumatic design lowers the drawer into the closed position. Consult the minimum reveal table to make sure the drawer front clears the countertop overhang when the drawer opens. Overhang IMPORTANT-Install #6 FH wood screw to attain max. load capacity #6 FH Wood Screw Hole 13.5 (1/2") # 6 Scr Reveal System Screw Hole or #7 FH wood screw System FH wood 18.5 (3/4") 3 (1/8") Rise 9 (3/8") 37(1-7/16") Heigh Adjus Slot Cabinet front Overhang Reveal 16 ( 5 /8") 1 ( 1 /32") 32 (1 1 /4") 48 (1 7 /8") 2 ( 3 /32") 3 ( 1 /8") 4
Front Drawer and cabinet specifications Frame Cabinet Installation Panel Cabinet Installation Socket Range 25 to 62 (1" to 2-7/16") Cabinet Install screw in flange* Install at least one center screw* 18 (3/4") 13.5 (1/2") Min. Top Clearance(1) 16 (5/8") 32mm Increment 37 (1-7/16") Drawer Max. Drawer Height(1) 20 (13/16") *To achieve maximum weight capacity 612TH 602300 RH 602301 LH Rear Mount Sockets Extension Loss 4 (3/16") Drawer Mounting Attach through sides or bottom Position profiles flush with front of drawer box. Interior Cabinet Width Drawer Width = Interior Cabinet Width - 25(1") Drawer width Drawer length 15 (9/16") Min. Top Clearance (1) Opening Tolerance Max. Drawer Height (1) 19 (3/4") Side Clearance 12.5 (1/2") Captive Cabinet Screws 606N (#6 x 5/8") or System screws Rear Mount Socket Location 612TH Min. (3) recommended 21 (7/8") 18.5 (3/4") 32 (1-1/4") 53 38 (2-1/8") (1-1/2") 4 (3/16") Drawer Screws 606N (#6 x 5/8") min. 3 per profile 7 (9/32") 33.5 (1-11/32") Dotted line shows front frame (1) top clearance and maximum drawer height when drawer is of recommended length and tilting to remove is not desired. 5
STANDARD 230E Series Bottom mounted single extension drawer runners Specifications Runner 230E8000 230E7500 230E7000 Nominal Inches 32" 30" 28" Frame Cabinet * Maximum 852 802 752 (33 9 /16") (31 9 /16") (29 9 /16") 805 755 705 (31 3 /4") (29 3 /4") (27 3 /4") Panel Cabinet * 803 753 703 (31 5 /8") (29 5 /8") (27 11 /16") Suggested Drawer 800 750 700 (31 1 /2") (29 1 /2") (27 9 /16") * For overlay drawer fronts. Space requirements for inset drawers will vary according to front thickness. A trial is recommended. ** At suggested drawer length. Extension Loss** 152 145 135 (6") (5 23 /32") (5 5 /16") Cabinet & Drawer 800 750 700 (31 1 /2") (29 1 /2") (27 9 /16") 128 128 128 128 96 128 9 37 2 Colors: White or R901 cream 230E8000 (32") 230E7500 230E7000 (30") (28") 230E Rear Mount Socket IMPORTANT-Install #6 FH wood screw to attain max. load capacity #6 FH Wood Screw Hole System Screw Hole or #7 FH wood screw 13.5 (1/2") 601962-VH21 601960 601961 L&R set RH socket LH socket 9 (3/8") 37(1-7/16") 18.5 (3/4") Cabinet front 6
Front Drawer and cabinet specifications Frame Cabinet Installation Panel Cabinet Installation Socket Range 3 to 50 (1/8" to 1-15/16") Cabinet Install screw in flange* Install at least one center screw* 18 (3/4") 13.5 (1/2") Min. Top Clearance(1) 16 (5/8") 32mm Increment 37 (1-7/16") Drawer Max. Drawer Height(1) 22 (7/8") *To achieve maximum weight capacity 612TH 601962-VH21 (L&R set) Rear Mount Socket Extension Loss 6 (1/4") Drawer Mounting Attach through sides or bottom Position profiles flush with front of drawer box. Interior Cabinet Width Drawer Width = Interior Cabinet Width - 25 (1") Drawer width Drawer length 15 (9/16") Min. Top Clearance(1) Opening Tolerance Max. Drawer Height(1) 21 (13/16") Side Clearance 12.5 (1/2") Captive Cabinet Screws 606N (#6 x 5/8") or System screws Rear Mount Socket Location 612TH Min. (3) recommended 21 (7/8") 18.5 (3/4") 32 (1-1/4") 53 38 (2-1/8") (1-1/2") 6 (1/4") Drawer Screws 606N (#6 x 5/8") min. 3 per profile 7 (9/32") 33.5 (1-11/32") Dotted line shows front frame (1) top clearance and maximum drawer height when drawer is of recommended length and tilting to remove is not desired. 7
Assembly tools MINIFIX For precise positioning of cabinet profile fixing screws. For 230M, 230E and 430E runners MINIFIX 65.3300 18 Drawer front adjusters and marking gauge Drawer front adjuster Nylon housing with pre-mounted 8-32 steel nut. For 4-sided drawers. Adjusts height and side-toside by 5 (3/16"). Installation of drawer front adjuster using marking gauges 1 2 10.5 Ø20 1. Bore for front adjusters. Insert marking gauges into drawer front. 2. Align the drawer front to make marks in the drawer box. 8-32 thread Drawer front adjuster 295.1000 3 4 MINIPRESS Ram Ø20 Drill bit MZM.0095 10.5 MOI.ZB20.02 Ø20 Marking gauge For marking center holes for knock-in drawer front adjusters, 295.1000. For wooden 4-sided drawers. 3. Mark fixing positions with a light tap onto the drawer front. 4. Drill Ø5 (3/16") holes through the drawer box. 10 Ø20 5 6 Marking gauge 65.2950 5. Insert drawer front adjusters manually or with a MINIPRESS insertion ram (MZM.0095) 6. Install and adjust drawer front. 12
68 62 30 Special application Standard Series with roll-out tray mounted to Blum Universal Drawer Brackets 295.4000 Universal Drawer Bracket 295.4000 Universal Drawer Bracket Mounting Screw M4 x 1/4" Mounting Screw M4 x 1/4" 16 (5/8") 30 (1-3/16") 18 (3/4") 62 (2-1/2") 612TH Screws 612TH Screws Roll-out tray with 230M runner Roll-out tray with 430E runner For mounting Blum runners to the floor of a cabinet (roll-out tray). Attach to cabinet with Blum 612TH screws, (#6 x 1 /2" trusshead) 16 48 64 M4 tapped holes Zinc coated (4) per set with M4 screws Universal bracket kit 295.4000 1.5 68 POZI screwdriver and bits a critical tool in full torque application A POZI screwdriver (different from Phillips) is the most crucial tool you can use to assure that full torque is applied to all Blum adjustment screws. POZI screws can be identified by the distinctive tick marks located in the center of the screwhead recess. Tick marks Hand screwdriver #2 POZI DRIVER POZI DRIVER 1 /4" Hex drive for power drivers Magnetic bit holder BIT HOLDER #2 x 1 x 1 /4" POZI drive insert POZI BIT #2x1 13