It's ideas that are decisive. Ideas in great shape. With the Frech difference.
The Frech profile: Performance, variety, innovation. Intensive consulting, design support and production administration from the very start High-performance prototype construction Our own form and tool construction Injection-moulding technology Clean-room technology Punching and forming technology Subassembly production Logistics Welcome to Frech a company that has a great deal to offer you from a single source: Tool construction and parts production, punching, forming and injectionmoulding competence, clean-room technology, subassemblies and systems plus creative combinations of all of them. Because that's the Frech difference: we combine all kinds of different competencies to realize innovative solutions in the most varied product sectors. Fresh ideas for product, process and production optimization that's our contribution to even better solutions. We develop together with you, bringing all kinds of different worlds together under one roof. Gerhard, Josef and Roland Frech
The Frech difference: Competencies combined. At Frech you have the option of interdisciplinary combination: sophisticated punched, formed and injection-molded parts Filigree or ultra-finely molded insertion components Micro-components Complete subassemblies and systems And with all these different possibilities, there's a lot you can do especially when you include the construction of readymade subassemblies. As you can see: Frech does a lot. What would you like to do together with us? We're ready.
Engineering with Frech: Function, economic efficiency, value. Frech is an interesting address whenever you need people to think things through with you for the creative and productive realization of parts or subassemblies that have to conform to the most stringent quality standards. We've made preparations for that too: with comprehensive 3D design, CAD/CAM technology, direct data acquisition and simulation programs that enable a clear prognosis about the product to be expected. But none of that would be worth much without decades of know-how. Anyone who optimizes new products year after year for economically efficient production has the kind of experience for which there is no substitute. A basis that creates trust, and is founded on sound facts. Frech processes over 300 tonnes of high-quality plastics each year 500 realized forming and injectionmolding tools and 400 punching tools are clear proof of our daily, "hands-on" approach. Creative engineering from Frech can give your products longer-lasting quality too.
Filling simulation and analysis of injection molding behavior Frech takes on more for you. Material selection production and function requirements Material selection for specific ambient conditions in later use Constructive production optimization to reduce costs Optimization of tolerances Constructive optimization of products or functions Parameter determination for optimal touch-and-feel. Stereolithography components and prototypes for initial function and compatibility tests
Mold and tool production at Frech: Expert. Precise. Perfect. Frech can do more for you too.
Frech realizes more for you too. CAD/CAM connection Wire and cavity-sinking EDM Milling technology For highest flexibility and short time to market Frech offers more for you too. Tool production for punching and forming technology and also follow-on composite tools injection-molded tools designed entirely by us
Plastic injection molding at Frech: Precise. Efficient. Versatile. Plastic injection molding isn't just plastic injection molding: anyone who produces as many different components for so many and varied sectors as we do has to deal far more intensively with this material that someone who produces series that are always exactly the same. Apart from pure injection-molded components we also produce extrusioncoated parts from massive to thin-walled, in highly complex shapes, and with a quality that remains absolutely constant.
Hardened precision blanks, partially coated with POM, wall thickness 0.5 mm Frame for sunshade made from metal wire, extrusioncoated with polyamide Frech masters more for you too. injection-molded parts from batch size 1 to infinity processing of standard thermoplastics to high-performance ones, such as PEEK, PPSU, etc... Duroplast injection molding (pourable) BMC (pressed mass) insertion components: extrusioncoating of metal components either with purchasing management or from our own production Plus very special requirements precisely to your wishes. Just ask us! Bushing ø 40 mm, PVC-coated Interlocking handle combination with adjustment guard and angle adjuster, made from polyamide
High-end with Frech: Clean-room technology included. Frech invests more for you too. Modular clean room in clean-room class 7 according to ISO 14644 GMP conformity with direct connection of injection-molding machines Also for blowing-extrusion parts For the highest demands on part purity, you can rely on state-of-the-art clean room technology from Frech. For applications where high-purity parts are absolutely essential such as in medical technology or sensor technology we not only offer the technology but also fully understand the production philosophy behind them. So if you're looking for a qualified producer of high-purity construction components who gives you high flexibility and high performance, you've already found one.
Implant packaging: lid with film hinge, extrusion coated Medical technology at Frech: Fit. Healthy. Vital. Frech performs more for you too. Handle, made from several components, with extrusion-coated insertion components made from PEEK References in all sectors of medical technology broad experience with special technological plastics for medicine technology broad production spectrum ranging from mini-implants to intelligent packaging solutions Housing for electrode handles, made from PPSU 4 components made cheaply using a family tool
Punching and forming at Frech: Power. Skill. Safety. Whatever you produce yourself, you have complete control over. Certainly if you've been making it for decades, like we have. That way you always have parts produced with a special difference and not just with brute force. Starting with punching technology, Frech has gradually developed forming technology and invested in production installations that enable punching and forming on the same machining unit the ideal basis for the broadest possible production spectrum. Frech forms more for you too. Hydraulic presses 10 to 45 tonnes punching presses from 5 to 100 tonnes 1.200 mm 10 mm
Subassembly production at Frech: Painstaking. Accurate. Certified. Spindle brake, completely assembled and produced from different materials: Duroplast/Thermoplast combination, spring elements made from POM, clamp elements from fiberglass-reinforced polyamide. Assembly of complex subassemblies: the important thing here is to match the perfection of the individual components with perfect assembly. We created the preconditions for high-quality assembly years ago, and have continuously improved on them since. Whether it's seemingly simple consumer products such as multiple power socket extensions with integrated child protection or sophisticated handles for minimal invasive surgi-cal instruments, products from Frech function, retain their value and are fun to use. Naturally for you, but also for your customers. And that's what counts the most. Frech assembles more for you too. Assembly lines for all requirements with state-of-the-art machinery and testing equipment. manual semiautomatic fully automatic Subassembly solutions from a single source: tool production, punching and forming technology, purchasing management and semi-automatic assembly all from Frech.
Frech Over the Years. At a Glance. 1970 Firm founded by Josef Frech in Königsheim, as "Frech Stanztechnik" 1976 Punching shop extended, tool production begins 1982 Renewed extension of tool shop, injection molding technology introduced 1989 Planning and construction of new production plant with adjoining administration wing Engineering Development of child safety features 1990 New production building opened in the Königsheimer Lindenwiesen 1995 Planning and construction of a warehouse for raw materials and prefabricated parts 1996 Certification to DIN ISO 9002 Injection molding in the most varied materials and an enormous range of colours and designs 2003 Firm becomes an AG. General partner Josef Frech, limited partners Gerhard Frech and Roland Frech. Certification to DIN ISO 9001:2000 2004 Expansion and modernisation of the administration wing 2006 Introduction of clean-room technology. Modular clean-room with three injection-molding machines
All from Frech. What you can rely on: Safety Quality as a daily attitude benefits every single product at Frech. Reliability Punctuality has long been one of our core values. Innovation Punching and forming technology including tool production Our ambition is product and customer-oriented product improvement. Performance State-of-the-art production technology enables effective work. Quality Safe proocesses, care, precise documentation: for repeatable results. Assembly including purchasing management Certification DIN ISO 9001:2000 Continuity Two Frech generations guarantee personal management continuity and personal corporate responsibility. Futureproof Packaging and customer-specific logistics With Frech you can look forward tomorrow thanks to steady investments and corporate development that keeps a steady eye on the future.
FRECH KG Josef Frech KG Lindenwiesen 5 78598 Königsheim Germany Phone +49 (0) 07429 / 9400-0 FAX +49 (0) 07429 / 9400-30 info@joseffrech.de More information and the latest technical information available at www.joseffrech.de www.kms-netpoint.de ID DF99E 032007