PREMISE CONNECTIVITY
TM Keystone Work Area Outlet Systems Category 6+ Keystone Jacks Category 5e+ Keystone Jacks Category 3 Voice Grade Keystone Jacks Keystone Jack Accessories A Multimedia Connector Modules Single Gang Faceplates Single Gang Angled Faceplates Single Gang Stainless Steel Faceplates Single Gang Wall Mount Phone Plates Double Gang Faceplates Double Gang Angled Faceplates Double Gang Stainless Steel Faceplates 106 Type Faceplates and Adapters Decora Style Faceplates and Adapters Surface Mount Faceplate Boxes Drywall Mounting Brackets Modular Furniture Adapters Surface Mount Multimedia Boxes
AKEYSTONE Category 6+ Component Level Keystone Jacks Signamax Connectivity Systems new high-performance Category 6+ Keystone Jacks have been designed to meet the need for high-bandwidth applications, or to anticipate the need for extreme future requirements. Category 6+ connectors are slim in profile for the highest density applications, and are engineered to exceed all TIA/EIA-568-B.2-1 Category 6 component, permanent link and channel level requirements and are fully tested beyond 250 MHz. Jacks support both T568A and T568B wiring for maximum flexibility using an easy to read color-code wiring label and can be terminated using standard single position 110 or Krone termination tools. A new contact design provides enhanced plug to jack connection integrity and protects against damage caused by insertion of 4 or 6 position plugs and are rated for 750 plug insertions providing for the highest level of system reliability. Rear 110 type contacts have been redesigned to provide improved wire retention and ease of termination. Jacks feature the ability to mount either color-coded icon tabs for service identification or dust covers to protect unused jacks form dust and other contaminants. Jacks are available in eight colors and are supplied with three color-matched icon tabs and dust covers for voice or data identification. KJ458-C6C-RD KJ458-C6C-WH KJ458-C6C Category 6+ Component Level Keystone Jacks KJ458-C6C-YE KJ458-C6C Category 6+ Keystone Jack, T568A/B Wiring, Light Ivory Stantard color is Light Ivory. For others colors add the following to P/N; -BK=Black -BU=Blue -GN=Green -OR=Orange -RD=Red -WH=White -YE=Yellow Category 6+ Component Level Shielded Keystone Jacks KJS458-C6C Category 6+ Shielded Keystone Jack, T568A/B Wiring KJS458-C6C A1 PREMISE CONNECTIVITY
Category 6 Channel Level Keystone Jacks A KEYSTONE Signamax Connectivity Systems Category 6 Channel Level Keystone Jacks have been designed to meet the need for high-bandwidth applications. Category 6 connectors are slim in profile for the highest density applications, and are engineered to exceed all TIA/EIA-568-B.2-1 Category 6 permanent link and channel level requirements. Category 6 jacks are fully tested to 250 MHz. Category 6 channel level jacks support both T568A and T568B wiring for maximum flexibility using an easy to read color-code wiring label and can be terminated using standard single position 110 or Krone termination tools. New contact design provide enhanced plug to jack connection integrity and protects against damage caused by insertion of 4 or 6 position plugs and are rated for 750 plug insertions providing for the highest level of system reliability. These jacks feature the ability to mount either color-coded icon tabs for service identification or dust covers to protect unused jacks form dust and other contaminants. Jacks are available in eight colors and are supplied with three color-matched icon tabs and dust covers for voice or data identification. KJ458-C6-RD KJ458-C6-BU KJ458-C6 KJ458-C6-YE Category 6 Channel Level Keystone Jacks KJ458-C6 KJ458-C6-BK KJ458-C6-BU KJ458-C6-GN KJ458-C6-OR KJ458-C6-RD KJ458-C6-WH KJ458-C6-YE Category 6 Keystone Jack, T568A/B Wiring, Light Ivory Category 6 Keystone Jack, T568A/B Wiring, Black Category 6 Keystone Jack, T568A/B Wiring, Blue Category 6 Keystone Jack, T568A/B Wiring, Green Category 6 Keystone Jack, T568A/B Wiring, Orange Category 6 Keystone Jack, T568A/B Wiring, Red Category 6 Keystone Jack, T568A/B Wiring, White Category 6 Keystone Jack, T568A/B Wiring, Yellow KJ458-C6-BK TM A2
AKEYSTONE Category 5e+ Component Level Keystone Jacks Category 5e+ Component Level Keystone Jacks exceed component, permanent link and channel level requirements as defined in TIA/EIA-568- B.2 and are fully tested to 155 MHz and provide a sound platform for supporting all today's network operating systems including Gigabit Ethernet. These jacks install easily with insulation displacement technology (IDC) to provide a gas-tight wire-to-connector interface. Category 5e+ jacks can be terminated with industry standard 110 or Krone termination tools and feature color-coding for both T568A and T568B wiring. Jacks feature the ability to mount either color-coded icon tabs for service identification or dust covers to protect unused jacks form dust and other contaminants. Jacks are available in eight colors and are supplied with three color-matched icon tabs and dust covers for voice or data identification. KJ458-C5E-RD KJ458-C5E-OR KJ458-C5E Category 5e+ Component Level Keystone Jacks KJ458-C5E KJ458-C5E-BK KJ458-C5E-BU KJ458-C5E-GN KJ458-C5E-OR KJ458-C5E-RD KJ458-C5E-WH KJ458-C5E-YE Category 5e+ Keystone Jack, T568A/B Wiring, Light Ivoy Category 5e+ Keystone Jack, T568A/B Wiring, Black Category 5e+ Keystone Jack, T568A/B Wiring, Blue Category 5e+ Keystone Jack, T568A/B Wiring, Green Category 5e+ Keystone Jack, T568A/B Wiring, Orange Category 5e+ Keystone Jack, T568A/B Wiring, Red Category 5e+ Keystone Jack, T568A/B Wiring, White Category 5e+ Keystone Jack, T568A/B Wiring, Yellow KJ458-C5E-YE Category 5e+ Component Level Shielded Keystone Jacks KJS458-C5E Category 5e+ Shielded Keystone Jack, T568A/B Wiring KJS458-C5E Category 5e+ Feed-Thru Coupler KRJ45/5S KRJ45/5S-SH Category 5e+ Panel Mount Feed-Thru Coupler, Black Category 5e+ Shielded Panel Mount Feed-Thru Coupler A3 PREMISE CONNECTIVITY KRJ45/5S
Category 3 Voice Grade Keystone Jacks The 6-position, 6-conductor connector is designed for business system applications. The connector utilizes IDC termination, accepts 22-24 AWG solid wire, and provides maximum flexibility in designing voice and low speed data distribution systems. Termination can be done using 110 punch down tools, or by using the termination cap for fast and easy termination. The KJJ series jack can either be end, or mid-span terminated, to suit the application. Category 3 Voice Grade Keystone Jacks KJ126-C3 KJJ126-C3U Category 3 RJ-12 6 Wire Keystone Jack, USOC Wiring Category 3 Toolless RJ-12 6 Wire Keystone Jack, USOC Wiring KJ126-C3U KJJ Series KJJ126-C3U A KEYSTONE Keystone Jack Accessories A number of accessories are available for Signamax Keystone Jacks. Designation icons and dust covers can be specified, for providing both port protection and color-coding. The universal wiring fixture is compatible with both Category 5e and 6 connectors. It helps to facilitate wire orientation and termination on-site. Keystone Jack Dust Covers and Icon Tabs DCC-50-XX DDC-50D-XX Designation Dust Cover, Data, Package of 50 DDC-50V-XX Designation Dust Cover, Voice, Package of 50 DDC-50B-XX Designation Dust Cover, Blank, Package of 50 DIT-50D-XX Designation Icon Tabs, Data, Package of 50 DIT-50V-XX Designation Icon Tabs, Voice, Package of 50 DIT-50B-XX Designation Icon Tabs, Blank, Package of 50 For standard colors substitute XX in P/N. BK=Black BU=Blue GN=Green OR=Orange RD=Red WH=White YE=Yellow IV=Light Ivory DIT-50-XX Keystone Jack Termination Fixture KJ-TF Keystone Jack Termination Fixture KJ-TF TM A4
AKEYSTONE Keystone Multimedia Modules Signamax Connectivity Systems offers a wide range of keystone connector modules designed to create a customized multimedia solution in any single or double gang faceplate or surface mount box. Applications include high end audio/video systems, satellite systems, CTV, CCTV, DVD, and VCR, for home, classroom and office environments. Fiber optic systems are supported with ST, SC and small form-factor connectors LC and MT-RJ. Keystone Blank Modules Blank Modules cover up unused port opening on all Signamax keystone faceplates and surface mount boxes. Blank Modules are sold in packages of 10. CMK-BL CMK-BL Blank Keystone Module F-Type Connector Modules F-Type feed-thru modules are compatible with all Signamax keystone faceplates and surface mount boxes. Connectors are 75 ohm and rated for 1 GHz performance. CMK-F F-Type Keystone Connector Module Model CMK-F BNC Connector Module BNC Modules are compatible with all Signamax keystone faceplates and surface mount boxes. The BNC modules provide one feed-thru connection. CMK-BNC BNC Keystone Connector Module Model CMK-BNC RCA-110 Connector Modules CMK-110RCAW CMK-110RCAY The RCA to 110 modules enable transmission of audio/video signals over Category 5, 5e or 6 UTP cabling and features 110 type IDC terminations on rear for quick, easy installation. RCA modules are offered in three colors to indicate media type; Red - Right Audio, White - Left Audio and Yellow - Video. CMK-110RCAW CMK-110RCAR CMK-110RCAY RCA White Stripe to 110 Connector Module RCA Red Stripe to 110 Connector Module RCA Yellow Stripe to 110 Connector Module CMK-110RCAR A5 PREMISE CONNECTIVITY
RCA Feed-Thru and Solder Type Connector Modules Modules are available with RCA connectors in both feed-thru and solder type versions. All RCA modules are offered in three colors to indicate media type; Red - Right Audio, White - Left Audio and Yellow - Video. CMK-RCAW A KEYSTONE CMK-RCAW CMK-RCAR CMK-RCAY CMK-RCASW CMK-RCASR CMK-RCASY RCA White Stripe Feed-Thru Connector Module RCA Red Stripe Feed-Thru Connector Module RCA Yellow Stripe Feed-Thru Connector Module RCA White Stripe Solder-Tail Connector Module RCA Red Stripe Solder-Tail Connector Module RCA Yellow Stripe Solder-Tail Connector Module CMK-RCAY CMK-RCAR SVHS -110 and Feed-Thru Connector Modules The SVHS to 110 modules enables connection to your video systems using Category 5, 5e or 6 UTP cabling and feature 110 type IDC terminations of rear for quick, easy installation. These modules provide a cost effective alternative to running S-Video cabling. Other SVHS modules provide a feed-thru female to female connector. CMK-110SVHS CMK-110SVHS CMK-SVHS SVHS to 110 Connector Module SVHS Feed-Thru Connector Module CMK-SVHS 3-Way Binding Post Connector Modules 3-Way Binding Post Modules provide termination options for banana plugs, speaker tips, spade tips or bare wire. Binding post modules are available with red or black color-code. CMK-RA CMK-RA CMK-BA Red 3-Way Binding Post Connector Module Black 3-Way Binding Post Connector Module CMK-BA Fiber Optic Connector Modules Fiber Optic Modules bring ST. SC, LC and MT-RJ fiber connectors to the workstation. Fiber couplers are provided with phosphor bronze sleeves suitable for both multimode and singlemode applications. CMK-ST CMK-SC CMK-ST CMK-SC CMK-MTRJ CMK-LC ST MM/SM Fiber Connector Module SC MM/SM Fiber Connector Module MT-RJ MM/SM Fiber Connector Module LC MM/SM Fiber Connector Module CMK-MTRJ CMK-LC TM A6
AKEYSTONE Keystone Faceplates Signamax Connectivity Systems offers one of the broadest selections of field configurable, flush mount faceplates and multimedia surface mount boxes. From single gang faceplates to multimedia surface mount multi-port boxes; Signamax has the solutions to fit your needs. Single Gang Faceplate without Labeling Windows Single gang faceplates are available in 1-, 2-, 3-, 4- or 6-port versions and allow for mounting any combination of keystone jacks and multimedia modules. SKF-1 SKF-2 SKF-3 SKF-4 SKF-6 1-Port Single Gang Keystone Faceplate 2-Port Single Gang Keystone Faceplate 3-Port Single Gang Keystone Faceplate 4-Port Single Gang Keystone Faceplate 6-Port Single Gang Keystone Faceplate Single Gang Faceplate with Labeling Windows Single gang faceplates are available in 1-, 2-, 3-, 4- or 6-port versions and allow for mounting any combination of keystone jacks and multimedia modules. These faceplates feature a top and bottom designation labeling window for convenient faceplate identification. Plates are supplied with mounting screws, label cards and clear covers. SKFL-1 SKFL-2 SKFL-3 SKFL-4 SKFL-6 1-Port Single Gang Keystone Faceplate w/labeling 2-Port Single Gang Keystone Faceplate w/labeling 3-Port Single Gang Keystone Faceplate w/labeling 4-Port Single Gang Keystone Faceplate w/labeling 6-Port Single Gang Keystone Faceplate w/labeling A7 PREMISE CONNECTIVITY
Single Gang Angled Faceplate with Labeling Windows Single gang angled faceplates are available in 2- and 6-port versions. These plates allow an angled cable exit to prevent damage and help maintain the bend radius of patch cords. Faceplates feature a top and bottom designation labeling window for convenient faceplate identification. Plates are supplied with mounting screws, label cards and clear covers. SKFLA-2 A KEYSTONE SKFLA-2 SKFLA-4 2-Port Single Gang Angled Keystone Faceplate 4-Port Single Gang Angled Keystone Faceplate SKFLA-4 SSKF-2 SSKF-4 SSKF-1 SSKF-6 SSKF-3 Single Gang Brushed Stainless Steel Faceplates Single gang brushed stainless steel faceplates allow mounting any combination of keystone jacks and multimedia modules. These faceplates allow for flush mounting of jacks and for a clean appearance. Stainless steel faceplates are ideal for use in environments that require greater durability and a sanitary, easy-to-clean solution. SSKF-1 SSKF-2 SSKF-3 SSKF-4 SSKF-6 1-Port Single Gang Stainless Steel Keystone Faceplate 2-Port Single Gang Stainless Steel Keystone Faceplate 3-Port Single Gang Stainless Steel Keystone Faceplate 4-Port Single Gang Stainless Steel Keystone Faceplate 6-Port Single Gang Stainless Steel Keystone Faceplate SSKF-1P Brushed Stainless Steel Keystone Wall Mount Phone Plate Stainless steel wall mount phone plate provides a clean, easy to install method for mounting any wall mountable phone. Plates are standard sized and with durable mounting posts. SSKF-1P Stainless Steel Keystone Wall Mount Telephone Plate TM A8
AKEYSTONE Double Gang Faceplate without Labeling Windows Double gang faceplates are available in 6-, 8- and 12-port versions and allow for mounting any combination of keystone jacks and multimedia modules. DKF-6 DKF-12 6-Port Double Gang Keystone Faceplate 12-Port Double Gang Keystone Faceplate DKF-6 DKF-12 Double Gang Faceplates with Labeling Windows Double gang faceplates are available in 8- and 12-Pport versions and allow for mounting any combination of keystone jacks and multimedia modules. These faceplates feature a top and bottom designation labeling window for convenient faceplate identification. Plates are supplied with mounting screws, label cards and clear covers. DGFK-8 DGFK-12 8-Port Double Gang Keystone Faceplate w/labeling 12-Port Double Gang Keystone Faceplate w/labeling DGFK-8 DGFK-12 A9 PREMISE CONNECTIVITY
Double Gang Angled Faceplate with Labeling Windows Double gang angled faceplates are available in an 8-port version. This plate allows an angled cable exit to prevent damage and help maintain the bend radius of patch cords. Faceplate features a top and bottom designation labeling window for convenient faceplate identification. Faceplate is supplied with mounting screws, label cards and clear covers. DKFLA-8 A KEYSTONE DKFLA-8 8-Port Double Gang Angled Keystone Faceplate Double Gang Stainless Steel Faceplates Double gang brushed stainless steel faceplates are available in 8- and 12-port versions allow for flush mounting of jacks and for a clean appearance. Stainless steel faceplates are ideal for use in environments that require greater durability and a sanitary, easy-to-clean solution. DSKF-8 DSKF-8 DSKF-12 8-Port Double Gang Stainless Steel Keystone Faceplate 12-Port Double Gang Stainless Steel Keystone Faceplate DSKF-12 SKF-106 106A-2 106A-4 106 Type Faceplates and Keystone Adapters The 106 Type Faceplates with 2- and 4-Port Adapters are compatible with all Signamax keystone jacks and multimedia modules. The 106 type plates and adapters are ideal to coordinate electrical wiring devices with structured wiring outlets. SKF-106 Single Gang 106 Type Faceplate 106A-2 2-Port 106 Type Keystone Adapter 106A-4 4-Port 106 Type Keystone Adapter TM A10
AKEYSTONE SKFD-1 DKFD-2 DA-2 Decora Style Faceplates and Keystone Adapters Decora Style Faceplates and Adapters are compatible with all Signamax keystone jacks and multimedia modules, Faceplates are available in single and double gang versions. Adapters are available in a 2-, 3- or 4-ports and are ideal for combining data, voice, audio and video in one outlet location. DA-3 DA-4 SKFD-1 DKFD-2 DA-2 DA-3 DA-4 Single Gang Decora Style Faceplate Double Gang Decora Style Faceplate 2-Port Decora Style Keystone Adapter 3-Port Decora Style Keystone Adapter 4-Port Decora Style Keystone Adapter SMB1-SG Surface Mount Faceplate Boxes Surface mount faceplate boxes are available to accommodate both single gang and double gang faceplates. Boxes provide knock outs on all sides for easy cable entry and are supplied with mounting hardware. SMB1-SG SMB1-DG Single Gang Surface Mount Faceplate Box Double Gang Surface Mount Faceplate Box SMB1-DG Drywall Faceplate Mounting Brackets Drywall brackets provide a quick and secure installation of single and double-gang faceplates. This not only speeds installation time, but makes moves & adds much easier to accomplish. The 12 gauge material thickness is reinforced at the mounting-tab, to remain in proper position, throughout the life of the installation. Device plate mounting holes are pre-tapped for plate fastening. SGF-MB SGF-MB DGF-MB Single Gang Drywall Mounting Bracket Double Gang Drywall Mounting Bracket DGF-MB A11 PREMISE CONNECTIVITY
Modular Furniture Keystone Adapters Modular furniture adapters accept all Signamax jacks and multimedia modules and are available in 2- and 4-port versions. Adapters fit into standard modular furniture openings. FAK-3 A KEYSTONE FAK-3 3- Port Modular Furniture Adapter FAK-4 4- Port Modular Furniture Adapter FAK-4 SMK-1 1-, 2-, and 4-Port Surface Mount Multimedia Boxes Surface mount multimedia boxes are available in a 1-, 2- and 4-port versions and support all Signamax keystone jacks and multimedia modules. SMK-1 SMK-2 SMK-4 1- Port Surface Mount Multimedia Box 2- Port Surface Mount Multimedia Box 4- Port Surface Mount Multimedia Box SMK-2 12-Port Surface Mount Multimedia Box The 12-port surface mount multimedia box provides the ability to mix and match up 12 copper, fiber or other media types in one location. The box can be mounted over a single or double gang NEMA wall box. The box is designed to accommodate industry-standard surface raceway for a clean transition to the box. Individual connectors ports can be color-coded using icons, and additional labeling areas are provided to suit the application. SMK-4 SMK-12 12 Port Surface Mount Multimedia Box SMK-12 TM A12