For utomotive pplications Description 65 C maximum total temperature operation Five sizes of utomotive grade shielded drum core inductors Inductance range from.8uh to uh Current range up to 56 mps Mechanical secure mounting for high shock and vibration environments Good thermal dispersion with thermal conductive epoxy Customized dual winding versions available upon request for SEPIC or Flyback configurations pplications utomotive Electronics (under the hood, interior/exterior) Telematics DC-DC converters Buck, boost, forward, and resonant converters Noise filtering and filter chokes Environmental Data Storage temperature range: - C to +65 C Operating temperature range: - C to +65 C (range is application specific) Solder reflow temperature: + C max. for seconds max. Complies with EC-Q standard RoHS /95/EC Packaging DR Series Supplied in tape and reel packaging, 3 (DR73), (DR74), 7 (DR4), (DR5), and 3 (DR7) per reel Part Number Rated OCL () Irms () Isat (3) Isat (4) DCR (5) K-factor (6) Inductance µh mperes mperes mperes (Ω) +/- Typ. DR73-R33-R.33.9 8.4 4.8.84..6 DR73-R-R..9 6. 8. 6.58.67 33.7 DR73-R5-R..36 5.39 6.73 5.38.97 7.5 DR73-R-R..5 4.8 4.93 3.95.6. DR73-3R3-R 3.3 3.8 3.59 4.35 3.48. 7.8 DR73-4R7-R 4. 4.86.9 3.5.8.33 4.4 DR73-6R8-R 6.8 6.63.6.96.37.4. DR73-8R-R 8. 8.6.3.74.9.53. DR73--R..7..39.9.64 9.8 DR73--R 5. 4.98.74...94 8. DR73--R..39.4.64.3.4 6.7 DR73-33-R 33. 3.84.5.35.8.83 5.5 DR73-4-R 47. 47.83...884.75 4.5 DR73-68-R 68. 66.89.845.937.749.397 3.8 DR73-8-R 8. 83.77.73.85.68.53 3.5 DR73--R.7.68.763..9 3. DR73-5-R 5..55.63.6.93.6 DR73--R 8.8.479..8.3. DR73-33-R 33 36.4.39.43.338.85.7 DR73-47-R 4 47.6.36.354.83.67.4 DR73-68-R 68 68.9..97.38 3.89. DR73-8-R 8 85.3.5.67.4 4.46. DR73--R 99.9.35.39.9 5.5. () Open Circuit Inductance test parameters: khz,.5v,.dc, tolerance is ± () Irms: DC current for an approximate T of C without core loss. Derating is necessary for C currents. PCB layout, trace thickness and width, air-flow, and proximity of other heat generating components will affect the temperature rise. It is recommended that the temperature of the part not exceed 65 C under worst case operating conditions verified in the end application. (3) Isat mperes peak for approximately 3 rolloff (@5 C) (4) Isat mperes peak for approximately % rolloff (@5 C) (5) DCR limits @ 5 C (6) K-factor: Used to determine B p-p for core loss (see graph). B p-p = K*L* I, B p-p(mt), K: (K factor from table), L: (Inductance in µh), I (Peak to peak ripple current in mps). (7) Part Number Definition: DRxxx-xxx-R DRxxx = Product code and size; -xxx = Inductance value in uh; R = decimal point; If no R is present, third character = # of zeros. -R suffix = RoHS compliant
For utomotive pplications DR Series Part Number Rated OCL () Irms () Isat (3) Isat (4) DCR (5) K-factor (6) Inductance µh mperes mperes mperes (Ω) +/- Typ. DR74-R33-R.33.88 7.6 8. 4.7.54 5.6 DR74-R-R..897 6.. 8.8.78 9. DR74-R5-R..3 5.55 8.36 6.69.9 3.9 DR74-R-R..33 4.8 6.3 4.9. 7.5 DR74-3R3-R 3.3 3.5 4.6 5.4 4.33.6 5.5 DR74-4R7-R 4. 4.68 3.4 4.38 3..4.5 DR74-6R8-R 6.8 6.5.9 3.68.94.34.5 DR74-8R-R 8. 8.5.66 3.7.54. 9. DR74--R. 9.6.56.97.37.43 8.5 DR74--R 5. 5.4.6.36.89.67 6.7 DR74--R..5.68.96.57. 5.6 DR74-33-R 33. 33..37.6.9.5 4.6 DR74-4-R 47. 46.56.4.37.99.9 3.9 DR74-68-R 68. 68.37.996.8.887.86 3. DR74-8-R 8. 8.45.879.34.87.367 3. DR74--R 98.5.8.99.743.49.7 DR74-5-R.9.66.748.598.648. DR74--R 8.9.544.66..96.8 DR74-33-R 33 38.9.435.54.4..5 DR74-47-R 4 47.5.383..336.93. DR74-68-R 68 68.8.35.35.8.86. DR74-8-R 8 85..79.37.6 3.63.9 DR74--R.7..9.34 4.9.8 DR4-R47-R.47.43 5.5 3.8 4.6.9 6.7 DR4-R-R..8.65. 7.6.3. DR4-R5-R..36 9.36 7. 3.7.49 9.3 DR4-R-R..4 7.64 4...7 7.6 DR4-3R3-R 3.3.79 6.94.85 9.48.9 6.4 DR4-4R7-R 4. 4.74 5.47 9.6 7.5.4 4.9 DR4-6R8-R 6.8 7.8 4.46 7.33 5.87. 4. DR4-8R-R 8. 8.88 3.87 6. 5.36.8 3.6 DR4--R..37 3.67 6.6 4.93.3 3.3 DR4--R 5. 4. 3. 5.3 4.5.44.9 DR4--R. 3..44 4.6 3.33.7.3 DR4-33-R 33. 34.3.98 3.4.74.8.9 DR4-4-R 47. 46.7.78.9.35.34.6 DR4-68-R 68. 69.77.454.369.895..3 DR4-8-R 8. 8.57.85.3.786.57. DR4--R 98.8.99...96. DR4-5-R 5.7.967.6.97.454.9 DR4--R 9.6.865.363.9.568.7 DR4-33-R 33 36.9.69.9.874.89.6 DR4-47-R 4 473..568.9.79.3.5 DR4-68-R 68 68..466.759.7.96.4 DR4-8-R 8 86.7.6.697.557.57.4 DR4--R..38.69.3.94.3 DR5-R47-R.47.453 8.47 33. 6.56.6 6.7 DR5-R-R..854 5.94 3.7 8.97.. DR5-R5-R..4.89 8.44 4.76.33 9.3 DR5-R-R...6 5.9.7.48 7.6 DR5-3R3-R 3.3.89 9.69.77..58 6.4 DR5-4R7-R 4. 4.9 7.67 9.76 7.8.9 4.9 DR5-6R8-R 6.8 6.3 6.8 8.74 6.99. 4.4 DR5-8R-R 8. 7.49 6.4 7.9 6.3.3 4. DR5--R. 9. 5.57 7. 5.77.7 3.6 () Open Circuit Inductance test parameters: khz,.5v,.dc, tolerance is ± () Irms: DC current for an approximate T of C without core loss. Derating is necessary for C currents. PCB layout, trace thickness and width, air-flow, and proximity of other heat generating components will affect the temperature rise. It is recommended that the temperature of the part not exceed 65 C under worst case operating conditions verified in the end application. (3) Isat mperes peak for approximately 3 rolloff (@5 C) (4) Isat mperes peak for approximately % rolloff (@5 C) (5) DCR limits @ 5 C (6) K-factor: Used to determine B p-p for core loss (see graph). B p-p = K*L* I, B p-p(mt), K: (K factor from table), L: (Inductance in µh), I (Peak to peak ripple current in mps). (7) Part Number Definition: DRxxx-xxx-R DRxxx = Product code and size; -xxx = Inductance value in uh; R = decimal point; If no R is present, third character = # of zeros. -R suffix = RoHS compliant
For utomotive pplications DR Series Part Number Rated OCL () Irms () Isat (3) Isat (4) DCR (5) K-factor (6) Inductance µh mperes mperes mperes (Ω) +/- Typ. DR5--R 5. 4.67 4.45 5.7 4.58.7.9 DR5--R..65 3.95 4.74 3.79.35.4 DR5-33-R 33. 3.47 3.9 3.86 3.9.53.9 DR5-4-R 47. 47.83.59 3.3.6.8.6 DR5-68-R 68. 68.48.5.635.8..3 DR5-8-R 8. 8.86.5.6.95.35. DR5--R 97.6.745.3.77.78. DR5-5-R..9.785.48.73.9 DR5--R.8.4.469.75.46.7 DR5-33-R 33 35..998.94.955.543.6 DR5-47-R 4 466.3.86.6.85.79.5 DR5-68-R 68 683.3.673.834.667..4 DR5-8-R 8 83.6.63.758.6.36.4 DR5--R 99.8.55.695.556.78.4 DR7-R47-R.47.43. 56. 44.8. 4.3 DR7-R-R..77 9.. 3..7. DR7-R5-R..7 5.3 3. 4.9.7 7.9 DR7-R-R..9.5 5.5.4. 6.5 DR7-3R3-R 3.3 3.5 9.59 8.7 4.93.68 4.8 DR7-4R7-R 4. 4.58 8.4 6.5 3.8.94 4. DR7-6R8-R 6.8 6.7 7.3 3.3.67. 3.4 DR7-8R-R 8. 8.33 6.33. 9.74.6 3. DR7--R. 9.63 6.. 8.96.7.9 DR7--R 5. 4.9 4.83 9.3 7.3.7.3 DR7--R..47 3.98 7.57 6.5..9 DR7-33-R 33. 3. 3. 6. 4.98..6 DR7-4-R 47. 47.9.6 5.9 4.7.9.3 DR7-68-R 68. 68..333 4.8 3.34.5. DR7-8-R 8. 83.9.8 3.84 3.7.55. DR7--R.8.888 3.46.77.75.9 DR7-5-R 5..54.83.6.69.7 DR7--R 9.8.53.35.88.398.6 DR7-33-R 33 38.3..93.54.6.5 DR7-47-R 4 474.5.87.6.9.9.4 DR7-68-R 68 676.6.736.33.6.5.3 DR7-8-R 8 84.6.637..978.54.3 DR7--R 998.7.598..878.75.3 () Open Circuit Inductance test parameters: khz,.5v,.dc, tolerance is ± () Irms: DC current for an approximate T of C without core loss. Derating is necessary for C currents. PCB layout, trace thickness and width, air-flow, and proximity of other heat generating components will affect the temperature rise. It is recommended that the temperature of the part not exceed 65 C under worst case operating conditions verified in the end application. (3) Isat mperes peak for approximately 3 rolloff (@5 C) (4) Isat mperes peak for approximately % rolloff (@5 C) (5) DCR limits @ 5 C (6) K-factor: Used to determine B p-p for core loss (see graph). B p-p = K*L* I, B p-p(mt), K: (K factor from table), L: (Inductance in µh), I (Peak to peak ripple current in mps). (7) Part Number Definition: DRxxx-xxx-R DRxxx = Product code and size; -xxx = Inductance value in uh; R = decimal point; If no R is present, third character = # of zeros. -R suffix = RoHS compliant Mechanical Diagrams DR73 Series FRONT VIEW RECOMMENDED PCB LYOUT SCHEMTIC 7.6.. 7.6.5 3.55 3.5 8. Dimensions in Millimeters. = Inductance value in uh. R = decimal point. If no R is present third character = # of zeros wwllyy = (date code) R = revision level
For utomotive pplications DR Series Mechanical Diagrams DR74 Series FRONT VIEW RECOMMENDED PCB LYOUT SCHEMTIC 7.6...5 7.6 4.35 3.5 8. DR4 Series FRONT VIEW RECOMMENDED PCB LYOUT 5... 4.5 DR4 5.5 3.85 3.8. DR5 Series FRONTVIEW RECOMMENDED PCBLYOUT SCHEMTIC 5. DR5.. 6. 5.5 3.85. 3.8 DR7 Series FRONT VIEW RECOMMENDED PCB LYOUT SCHEMTIC. DR7 5.. 8.. 5.5 3.85 3.8 Dimensions in Millimeters. = Inductance value in uh. R = decimal point. If no R is present third character = # of zeros wwllyy = (date code) R = revision level
For utomotive pplications DR Series Packaging Information DR73 Series. ±. 4. Ø.+./-. Ø. Min..75±. Bo DR73 7.±. 6. ±.3 = 7.9mm B= 7.9 mm K= 3.8mm Ko SECTION - o. Parts packaged on 3" Diameter reel,,3 parts per reel. DR74 Series. ±. 4. Ø. +./-. Ø. Min..75±. Bo DR74 7.±. 6. ±.3 = 7.9 mm B= 7.9 mm K= 4. mm Ko SECTION - o. Parts packaged on 3" Diameter reel,, parts per reel. DR4 Series.5 dia +./-...5 dia min.75 = 3. mm B= 3.mm K= 4.9 mm K SECTION - B DR4-6..5 4. +/-.3 Parts packaged on 3" Diameter reel, 7 parts per reel. DR5 Series.5 dia +./-...5 dia min.75 = 3. mm B= 3. mm K= 6.3 mm K SECTION - B DR5-6..5 4. +/-.3 Parts packaged on 3" Diameter reel, parts per reel. DR7 Series.5 dia +./-...5 dia min.75 = 3.mm B= 3. mm K= 8.3mm K SECTION - B DR7-..5 4. +/-.3 Dimensions are in millimeters. Parts packaged on 3" Diameter reel, 3 parts per reel.
For utomotive pplications DR Series Temperature Rise vs. Watt Loss DR 73 series DR 74 series 3 3.4.8..6..4.8.3.36.4.44.48.5.56.6.64.68 To t a l L o ss (W )...3.4.5.6.7.8.9.. Total Loss (W) DR 4 series DR 5 series 3 3...3.4.5.6.7.8.9...3...3.4.5.6.7.8.9...3 To t a l L o ss (W ) Total Loss (W) DR 7 series 8 3...3.4.5.6.7.8.9...3.4.5 Total Loss (W)
For utomotive pplications DR Series Inductance Characteristics OCL vs Isat/DR 73 series OCL vs Isat/DR 74 series % % % % % % 9 % 9 % 8 8 % % ofo C L % % % - 5 % ofo CL % % % - 5 % % 3 % 3 % % 5 % 5 % % 3 % % % % % 8 9 % % % % 3 % % % 3 % % % % % 8 9 % % % % % of Isat % of Isat OCL vs Isat/DR 4 series OCL vs Isat/DR 5 series % % % % % % 9 9 8 % 8 % CL % ofo % % % % - 5 CL % ofo % % % % - 5 3 % % 5 3 % % % 5 % 3 % % % % % 8 9 % % % % 3 % % % % % 3 % % % % % 8 9 % % % % 3 % % % of Isat % of Isat OCL vs Isat/DR 7 series % % % CL 9 % 8 % % - 5 % ofo % % % 3 % % % 5 % % 8 % 9 % % % 3 % % % % % 8 % 9 % % % of Isat
For utomotive pplications DR Series Inductance Characteristics DR 73 series DR 74 series MHz MHz.. khz khz khz khz. khz khz khz khz...... DR 4 series DR 5 series. MHz khz khz khz khz. MHz khz khz khz khz...... DR 7 series MHz. khz khz khz khz.. PM-439 3/7 Cooper Electronic Technologies 7 Visit us on the Web at www.cooperbussmann.com 5 Broken Sound Pkwy. Suite F Boca Raton, FL 33487 Tel: +-56-998- Toll Free: +-888-44-645 Fax: +-56-4-66 This bulletin is intended to present product design solutions and technical information that will help the end user with design applications. Cooper Electronic Technologies reserves the right, without notice, to change design or construction of any products and to discontinue or limit distribution of any products. Cooper Electronic Technologies also reserves the right to change or update, without notice, any technical information contained in this bulletin. Once a product has been selected, it should be tested by the user in all possible applications. Life Support Policy: Cooper Electronic Technologies does not authorize the use of any of its products for use in life support devices or systems without the express written approval of an officer of the Company. Life support systems are devices which support or sustain life, and whose failure to perform, when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in significant injury to the user.