Atlantic ip40-ip65 Metal distribution switchboard Atlantic series is designed by metal cabinets combinations created for low Voltage electrical switchboards. This line of products show an innovative aesthetic, fulfilling the quality and safety concepts necessary in a tough market. This series has a large range to offer the possiblility of creating tailored distribuition swhitch boards: surface, flush-fit, watertight enclosures; with opaque or transparent doors, with an extensive modular capacity, linking structures its fabrication is made with the highest quality materials and due to its fast and simple assembling offer a full functionality as well as integrate any switchgear model. Certifications According to low Directive norm 2006/95/cE Norms: UnE-En 62208 FT-ATLANTIC-01 Technical features - Protection degree: Surface combinable cabinets without door: ip30 Surface combinable cabinets with door: ip40 Surface compact cabinets: ip40 Surface compact cabinets:ip65 Flush-fit cabinets: ip40 - Resistence to impact: Surface combinable cabinets without door: ik07 Surface and flush-fit cabinets with transparent door: ik09 Surface and flush-fit cabinets with opaque door: ik10 - Range of temperature under normal conditions: -25ºC / +40ºC. - Watertight maximum temperature: 80ºC. - Epoxi-polyester maximum temperature: 125ºC. Electrical properties - Rated operational voltage (U e ): 1000 V AC. - Rated insulation voltage (U i ): 1000 V AC. - Rated impulse withstand voltage (U imp ): 12KV (depending on accesorie). - Intensity (I e ): 630 A (surface) / 250 A (flush-fit) (depending on accesorie). - Rated short time withstand (I cw ): 23 KA 1s. - Rated peak withstand current (I pk ): 48 KA.
Product range Standard painting cycle --Degrease: Removing residual oils by means of phosphate immersions. --Lighten: Twice, first with tap water and second withy deminneralized water. --Passivization: Mixture of Hcl+nA cl and bath against rust getting in that sense the proper finish ready to be painted. --Dry: with hot air (through 100º C tunnel). --Painted: with tighten epoxi polyester RAL 9003 with thickness 80-120 μ. Painting system A1.02 according to UnE-En iso 12944-5 norm. --Baking chamber: adhesion by polymerisation 180º baking tunnel during 15-20 minutes. Standard --Surface combinable cabinets without door ip30. --Surface combinable cabinets with opaque or transparent door ip40. --Surface compact cabinet with opaque or transparent door ip40. --Surface compact cabinet with opaque or transparent door ip65. --Flush-fit cabinets with opaque or transparent door ip40. --Modular capacity for the whole product range: 48 72 96 120 168 144 192. Materials --Case, sides, upper and lower covers for surface cabinets and frames for flush-fit units made with cold rolled steel plate En10130+A1 of 1,2 mm thickness. --Case for flush-fit units made with 1,2 mm thickness galvanised steel. --Opaque door made with cold rolled steel plate En10130+A1; 1 mm thickness for surface cabinets and 1,2 mm thickness for flush-fit cabinets. --Transparent door made with templated security glass of 4 mm thickness in smoked colour. Finishing --Tighten epoxi polyester paint emboss coating RAL 9003, 80-120 μ. --For combinable cabinets, upper and lower cover with RAl7016 (anthracite grey). --Resistence against corrosion under norm UNE-EN62208. Clasification C4-M under norms ASIM B-117:97; ISO 9227:0 and ISO 12944-6-98. For higher resistance against corrosion, consult for aditional prime. Destined for creating electrical low voltage distribution switchboards Supply Surface combinable cabinets IP30-IP40 They are supplied dismantled in a sole package which contains case, sides, upper and lower cover, cable entry lid and accessories bag. --Accessories bag: insulated caps for doors reversibility, wall support adjustments, mass continuity clamps, rail fixation rule and mounting instructions. Doors are supplied separatelly, in case of ordering, doors have already fitted two lockers and accessories bag. --Door accessories bag: hinge and locker elements, fixation screws, locking bolt and key. Surface compact cabinets IP40-IP65 & flush-fit cabinets IP40 They are supplied already mounted and in individual packaging which contains cabinet with door, lockers and accessories bag. --Accesories bag: insulated caps for doors reversibility, wall support adjustments (for surface cabinets), rail fixation rule, ket and mounting instructions. Covers and DIN rails. --They can be asked for in kits: Covers + DIN rails. --As an individual way: modular or blind covers and Din rails plus assembling supports for surface cabinets (48013), or flush-fit cabinets (48014). atlantic SERIES PAGE 2
SURfAcE combinables cabinets ip30 - ip40 Case --Cabinet totally assembled which is supplied dismounted in order to offer the installator the highest versatility making for easy assembling and wiring. --Case is a plain side which has two profiles where the components can be fitted. This profile has two horizontal lines of 25mm to fit cage nuts used for accessories fixation and a third line with circular 3mm diameter holes allowing to screw directly through the profile. --In the four depth corners and externally oriented there are four thigh-screw riveted for wall mounting support fixation. Sides --Sides assembling is made by clipped-on system. --Sides are reversibles and the contacting area between side and bottom has a flashing shape, guarranting the protection degree against water. Doors --Available opaque or transparent doors. --1mm thickness steel opaque door. --4 mm thickness tempered and security smoked glass with IDE serigraph for transparent door. --To fit them, it is supplied 4 c shape common elements, to fix the hinges and the cabinet lockers. this allows doors to be reversibles. Upper and lower covers --Clipped-on system on mounting of top and bottom framework. --RAl 7016 anthracite grey for covers. --They have a space of 440x106 mm in order to easy the pipe passage or tray installation. This width lenght agree with the rail easing in that sense the wiring distribution internally the cabinet. this hole is covered by the cale-entry lid. --Cable entry lid has a premoulded part with the tray and pipes dimension more used in order to facilitate the cuts. --This lid has a clipped-on system and it can be screwed in order to reinforce its fastening. Continuity mass and boost button --To promise the continuity of masses and protect the cabinet from indirect contacts, it is supplied 4 adjustments which attach the case with covers and sides. --Four fixing pressure plastic clips are supplied, giving in that way a higher stability to the cabinet and getting also the imposibility of dismounting the cabinet with a special tool according to the norm. Lock --Standar locker ¼ turn with 2 points of 5mm. All references has two lockers. --Another kind of locker are supplied as accessories. Possibility of join cabinets getting high magnitude and modular capacity atlantic SERIES PAGE 3
SURfAcE compact cabinets ip40 SURfAcE compact cabinet ip65 Case --The case of the cabinet has U shape, formed by a sole piece composed by the bottom and the sides. --Case is a plain side which has two profiles where the components can be fitted. This profile has two horizontal lines of 25 mm to fit cage nuts used for accessories fixation and a third line with circular 3 mm diameter holes allowing to screw directly through the profile. --In the four depth corners and externally oriented there are four thigh-screw riveted for wall mounting support fixation. Upper and lower covers --The assembling of upper and lower covers is made by clipp-on system. --Covers are RAL 9003 the same as the bottom cabinet. --They have a space of 440x106 mm to facilitate the entrance for pipes and installation trays. This width lenght agree with the rail easing in that sense the wiring distribution internally the cabinet. This hole is covered by the cale-entry lid. --Cable entry lid has a premoulded part with the tray and pipes dimension more used in order to facilitate the cuts. --This lid has a clipped-on system and it can be screwed in order to reinforce its fastening. Doors for ip40 and ip65 --Available opaque or transparent doors. --1mm thickness steel opaque door. --4 mm thickness tempered and security smoked glass with IDE serigraph for transparent door. --Doors for IP65 cabinets with waterthigh promising the protection degree. --To fit them, it is supplied 4 c shape common elements, to fix the hinges and the cabinet lockers. This allows doors to be reversibles. Lock for IP40 and IP65 --Standar locker ¼ turn with 2 points of 5 mm. All references has two lockers. --Another kind of locker are supplied as accessories. Case --The cabinet case is formed by a sole piece showing two profiles where all equipment of the set can be attached. --Case is a plain side which has two profiles where the components can be fitted. This profile has two horizontal lines of 25 mm to fit cage nuts used for accessories fixation and a third line with circular 3 mm diameter holes allowing to screw directly through the profile --In the four depth corners and externally oriented there are four thigh-screw riveted for wall mounting support fixation. --In the upper and lower part are place the the cable entries of 500x80 mm. --Those cable entries are covered with metallic lids screwed to the case with sheet metal screws. the cover has watertight to promise the protection degree of ip65. --It is advisable that entrance of pipes and cables are made trough cable glands in order not to loose the protection degree of the cabinet. atlantic SERIES PAGE 4
flush-fit cabinets ip40 Case --Made in galvanished steel, totally protected against rust from the wall humidity. It is form by one folding piece with some premouldes entries of 100x50 mm easy to break down for cables and pipes entrance. --For wall fixation there are two flaps which allows a better fixation in the embeded. Possibility of joining flush-fit cabinets getting high magnitude and modular capacity Frame --The frame of the cabinet is used as chassis, and can fit all electrical switchgears over a working table independently the embeded base. --It has two lines with 25 mm rectangular promouldes where all equipment of the set is fitted with cage nuts and screws. --The cabinet sides has wide spaces for wiring, where it can be fitted 40 or 60 mm width pipes. In case of necesity of wiring under the structure of the frame, there is a space between frame and bottom of 30 mm. --Frame totally installed with switchgears it is assembled over the case previously embeded. The premoulds has oval shape, which allows to correct the deviation from the embeded. Doors --Available opaque or transparent doors. --1,2 mm thickness steel opaque door. --4 mm thickness tempered and security smoked glass with IDE serigraph for transparent door. --Doors total plain for boosting the embeded aesthetic. --They are attached to the frame by means of internal hinghes which allows all doors to be reversibles. Lock --Standar locker ¼ turn with 2 points of 5 mm. All references has two lockers. --Another kind of locker are supplied as accessories. atlantic SERIES PAGE 5
Lid + Din rail kits (for surface and flush-fit cabinets) DIN rail for surface cabinets --Standars capacity per rail 24 modules. --Fixation system of Omega rail through clip-on supports. --Height adjustment supports one a variation in height of the Omega rail of 45 mm. The support has three pre-marked positions which are suitable for the three standard heights over the electrical switchgears. --The variation of this height can be made in the premounting or once the set is fitted in the cabinet. --In order to fit properly the rails over the case profiles, it is supplied a rule where the position of the holes to be used are marked depending on the number of rails need to be fitted. DIN Rail DIN for flush-fit cabinets --Standard capacity per rail 24 modules. --Rail fitted directly to the case through M6 cage nuts and M6x10 screws. --In order to fit properly the rails over the case profiles, it is supplied a rule where the position of the holes to be used are marked depending on the number of rails need to be fitted. Distance between rail and lid: 50,5 mm Distance between lid and door --Surface cabinets: 45,5 mm --Flush-fit cabinets: 33,5 mm Modular lids Plastic lids: --Hinged, closed by clipp-on system; in order to open the lid, it is neccesary to use a tool according to the norm. Manufactured in ABS colour RAL 9003. - Modular: 150 and 200 mm height with 24 modules capacity. - Blinds: 50, 150 and 200 mm height. Metalic lids: --Fix, screwed to the cabinet structure through M6 cage nuts and M6x10 anti-rotation screws. --Manufactured in cold steel plate and painted in RAL 9003 - Modular: 150 and 200 mm height with capacity for 24 modules; 300 and 400 mm height with capacity for 48 (2x24) modules. - Ciegas: 50, 150, 200, 300 and 400 mm heights. Lid and DIN rail kits Capacity modular cabinet lids SUrface flush-fit PLastic METalic COMBINABLE IP40 COMPACT IP40 COMPACT IP65 FLUSH-FIT IP40 surface FLUSH-FIT surface FLUSH-FIT 48 MOD. 40ENL48-72 40SUP48-72PO-PT 65SUP48-72PO-PT 40EMP48-72PO-PT S48P200 E48P200 S48M200 E48M200 72 MOD. 96 MOD. 120 MOD. 40ENL48-72 40SUP48-72PO-PT 65SUP48-72PO-PT 40EMP48-72PO-PT S72P150 E72P150 S72M150 E72M150 40ENL72-96 40SUP72-96PO-PT 65SUP72-96PO-PT 40EMP72-96PO-PT S72P200 E72P200 S72M200 E72M200 40ENL72-96 40SUP72-96PO-PT 65SUP72-96PO-PT 40EMP72-96PO-PT S96P150 E96P150 S96M150 E96M150 40ENL96-120 40SUP96-120PO-PT 65SUP96-120PO-PT 40EMP96-120PO-PT S96P200 E96P200 S96M200 E96M200 40ENL96-120 40SUP96-120PO-PT 65SUP96-120PO-PT 40EMP96-120PO-PT S120P150 E120P150 S120M150 E120M150 40ENL120-168 40SUP120-168PO-PT 65SUP120-168PO-PT 40EMP120-168PO-PT S120P200 E120P200 S120M200 E120M200 168 MOD. 40ENL120-168 40SUP120-168PO-PT 65SUP120-168PO-PT 40EMP120-168PO-PT S168P150 E168P150 S168M150 E168M150 144 MOD. 40ENL144-192 40SUP144-192PO-PT 65SUP144-192PO-PT 40EMP144-192PO-PT S144P200 E144P200 S144M200 E144M200 192 MOD. 40ENL144-192 40SUP144-192PO-PT 65SUP144-192PO-PT 40EMP144-192PO-PT S192P150 E192P150 S192M150 E192M150 CapACITY modular SUPPLIED WITH 48 MOD. 2 modular lids 200 mm + 1 blind lid 50 mm + 2 DIN rails 3 modular lids 150 mm + 3 DIN rails 72 MOD. 3 modular lids 200 mm + 1 blind lid 50 mm + 3 DIN rails 4 modular lids 150 mm + 1 blind lid 50 mm + 4 DIN rails 96 MOD. 4 modular lids 200 mm + 1 blind lid 50 mm + 4 DIN rails 5 modular lids 150 mm + 2 blind lids 50 mm + 5 DIN rails 120 MOD. 5 modular lids 200 mm + 1 blind lid 50 mm + 5 DIN rails 168 MOD. 7 modular lids 150 mm + 7 DIN rails 144 MOD. 6 modular lids 200 mm + 1 blind lid 50 mm + 6 DIN rails 192 MOD. 8 modular lids 150 mm + 1 blind lid 50 mm + 8 DIN rails atlantic SERIES PAGE 6
DIN rail kits ReferencE DescripTIOn 48013 Din rail 24 modules + assembling support SURFACE 48014 Din rail 24 modules + assembling support FLUSH-FIT Hinged plastic lids lid HEiGHt (mm) BLINDS ReferencE MODULAR MODULES 50 TC50 - - 150 TC150 TM150 24 200 TC200 TM200 24 Fix metalic lids lid HEiGHt (mm) REFERENCE MODULES BLINDS MODULAR 50 TCM50F - - 150 TCM150F TMM150F 24 200 TCM200F TMM200F 24 300 TCM300F TMM300F 2X24 400 TCM400F TMM400F 2X24 Numerous module combinations for the same size cabinet Surface combinable cabinet IP30-IP40 REFERENCE REFERENCE DOORS dimensions CABINET USEFUL SPACE CABLE ENTRACE Modular CAPACITY WEIGHT KG MAX. load. Kg. POWER DISSIPATION ACCORDING TO TEMPERATURE INCREASE OF ºc p(w)* (AxBxC) (DxE) (FxG) CABINET DOOR 20 25 30 35 40 40ENL48-72 PO40SUP48-72 670x510x212 450x538 440x106 48-72 13,03 6,28 20 65,00 85,80 107,60 130,40 153,90 PT40SUP48-72 670x510x212 450x538 440x106 48-72 13,03 4,87 20 65,00 85,80 107,60 130,40 153,90 40ENL72-96 PO40SUP72-96 670x710x212 650x538 440x106 72-96 17,52 7,90 30 82,80 109,30 137,10 166,10 196,10 PT40SUP72-96 670x710x212 450x538 440x106 72-96 17,52 8,46 30 82,80 109,30 137,10 166,10 196,10 40ENL96-120 PO40SUP96-120 670x910x212 850x538 440x106 96-120 21,59 9,69 40 104,30 137,70 172,70 209,20 247,00 PT40SUP96-120 670x910x212 450x538 440x106 96-120 21,59 9,77 40 104,30 137,70 172,70 209,20 247,00 40ENL120-168 PO40SUP120-168 670x1110x212 1050x538 440x106 120-168 25,44 11,42 50 126,80 167,30 209,90 254,30 300,20 PT40SUP120-168 670x1110x212 1050x538 440x106 120-168 25,44 11,72 50 126,80 167,30 209,90 254,30 300,20 40ENL144-192 PO40SUP144-192 670x1310x212 1250x538 440x106 144-192 29,67 12,62 60 129,20 170,50 213,90 259,10 305,90 PT40SUP144-192 670x1310x212 1250x538 440x106 144-192 29,67 13,45 60 129,20 170,50 213,90 259,10 305,90 Cabinet supplied without doors. Cabinet supplied empties, without lids neither DIN rails atlantic SERIES PAGE 7
Surface compact cabinets IP40 REFEREnce dimensions CABINET USEFUL SPACE CABLE ENTRACE modular capacity weight KG MAX. load. Kg. POWER DISSIPATION ACCORDING TO TEMPERATURE INCREASE OF ºc p(w)* (AxBxC) (DxE) (FxG) 20 25 30 35 40 40SUP48-72PO 670x510x212 450x538 440X106 48-72 15,46 20 65,00 85,80 107,60 130,40 153,90 40SUP48-72PT 670x510x212 450x538 440X106 48-72 16,10 20 65,00 85,80 107,60 130,40 153,90 40SUP72-96PO 670x710x212 650x538 440X106 72-96 17,88 30 82,80 109,30 137,10 166,10 196,10 40SUP72-96PT 670x710x212 650x538 440X106 72-96 18,82 30 82,80 109,30 137,10 166,10 196,10 40SUP96-120PO 670x910x212 850x538 440X106 96-120 20,29 40 104,30 137,70 172,70 209,20 247,00 40SUP96-120PT 670x910x212 850x538 440X106 96-120 21,97 40 104,30 137,70 172,70 209,20 247,00 40SUP120-168PO 670x1110x212 1050x538 440X106 120-168 24,06 50 126,80 167,30 209,90 254,30 300,20 40SUP120-168PT 670x1110x212 1050x538 440X106 120-168 25,02 50 126,80 167,30 209,90 254,30 300,20 40SUP144-192PO 670x1310x212 1250x538 440X106 144-192 31,75 60 129,20 170,50 213,90 259,10 305,90 40SUP144-192PT 670x1310x212 1250x538 440X106 144-192 32,68 60 129,20 170,50 213,90 259,10 305,90 Cabinets supplied empties, without lids neither DIN rail. Surface compact cabinets IP65 REFEREnce dimensions CABINET USEFUL SPACE CABLE ENTRACE modular capacity weight KG MAX. load. Kg. POWER DISSIPATION ACCORDING TO TEMPERATURE INCREASE OF ºc p(w)* (AxBxC) (DxE) (FxG) 20 25 30 35 40 65SUP48-72PO 670x510x212 450x538 500X80 48-72 16,17 20 65,00 85,80 107,60 130,40 153,90 65SUP48-72PT 670x510x212 450x538 500X80 48-72 19,08 20 65,00 85,80 107,60 130,40 153,90 65SUP72-96PO 670x710x212 650x538 500X80 72-96 21,00 30 82,80 109,30 137,10 166,10 196,10 65SUP72-96PT 670x710x212 650x538 500X80 72-96 23,25 30 82,80 109,30 137,10 166,10 196,10 65SUP96-120PO 670x910x212 850x538 500X80 96-120 24,53 40 104,30 137,70 172,70 209,20 247,00 65SUP96-120PT 670x910x212 850x538 500X80 96-120 25,71 40 104,30 137,70 172,70 209,20 247,00 65SUP120-168PO 670x1110x212 1050x538 500X80 120-168 29,34 50 126,80 167,30 209,90 254,30 300,20 65SUP120-168PT 670x1110x212 1050x538 500X80 120-168 31,03 50 126,80 167,30 209,90 254,30 300,20 65SUP144-192PO 670x1310x212 1250x538 500X80 144-192 34,16 60 129,20 170,50 213,90 259,10 305,90 65SUP144-192PT 670x1310x212 1250x538 500X80 144-192 35,59 60 129,20 170,50 213,90 259,10 305,90 Cabinets supplied empties, without lids neither DIN rail. Flush-fit cabinets ip40 REFEREnce dimensions CABINET USEFUL SPACE CAse to embed modular capacity weight KG MAX. load. Kg. POWER DISSIPATION ACCORDING TO TEMPERATURE INCREASE OF ºc p(w)* (AxBxC) (DxE) (FxGxH) 20 25 30 35 40 40EMP48-72PO 737x597x120 450x538 660x520x100 48-72 15,55 20 43,80 57,90 72,60 87,90 103,80 40EMP48-72PT 737x597x120 450x538 660x520x100 48-72 15,97 20 43,80 57,90 72,60 87,90 103,80 40EMP72-96PO 737x797x120 650x538 660x720x100 72-96 20,49 30 55,70 73,60 92,30 111,80 132,00 40EMP72-96PT 737x797x120 650x538 660x720x100 72-96 21,24 30 55,70 73,60 92,30 111,80 132,00 40EMP96-120PO 737x997x120 850x538 660x920x100 96-120 25,07 40 67,40 89,00 111,60 135,20 159,60 40EMP96-120PT 737x997x120 850x538 660x920x100 96-120 26,54 40 67,40 89,00 111,60 135,20 159,60 40EMP120-168PO 737x1197x120 1050x538 660x1120x100 120-168 29,64 50 78,90 104,10 130,60 158,20 186,80 40EMP120-168PT 737x1197x120 1050x538 660x1120x100 120-168 31,85 50 78,90 104,10 130,60 158,20 186,80 40EMP144-192PO 737x1397x120 1250x538 660x1320x100 144-192 33,24 60 90,20 119,10 149,40 180,90 213,60 40EMP144-192PT 737x1397x120 1250x538 660x1320x100 144-192 35,74 60 90,20 119,10 149,40 180,90 213,60 Cabinets supplied empties, without lids neither DIN rail. * Calculation obtained according to Norm CEI890:1997 + mistake corrections 1998; Method to determine by extrapolation of low tension derivated from serie (PTTA). atlantic SERIES PAGE 8
armarios surface de combinable superficie enlazable cabinets ip40 SURfAcE compact cabinets ip40 SURfAcE compact cabinets ip40 SURfAcE compact cabinets ip65 Dimensions Surface cabinets: Combinables IP40, Compacts IP40, Compacts IP65 SEctiOn DEtAil (z) flush-fit. SEctiOn DEtAil (z) SURfAcE ip40. SEctiOn DEtAil (z) SURfAcE ip65. atlantic SERIES PAGE 9
armarios de superficie enlazable ip40 flush - fit cabinets ip40 Dimensions Flush-fit cabinets IP40 detail A-A premoulded cable EntRiES in All SiDES Head Office. Polígono Industrial Villanueva de Gállego. Sector 2, Parcela H. 50830 Villanueva de Gállego - Zaragoza (Spain) Phone: +34 976 451 080. E-mail: ide@ide.es. www.ide.es