RASCH / SAFIX. Release Numbering at RASCH / SAFIX. Structure of families with additional functions. Summary of the forms
|
|
- Jack Warren
- 6 years ago
- Views:
Transcription
1 RASCH / SAFIX Release 2008 Automatic Search System of Fastenings RECHNERUNTERSTÜTZTES AUSWAHLSYSTEM FÜR SCHNELLEFESTIGER SYSTÈME AUTOMATIQUE DE RECHERCHE DE FIXATIONS Numbering at RASCH / SAFIX Structure of families with additional functions Summary of the forms RASCH/SAFIX Copyright A Raymond
2 INTRODUCTION RASCH / SAFIX (Automatic Search System of Fastenings) is first of all a catalogue of A.RAYMOND fastening solutions. As a computing support, it can be used in many languages. ased on the most up to date computing techniques, it complements the paper catalogue and can be used on both portable and office PC systemes in wide spread use. The catalogue offers many types of search, enabling you to find, amongst A.RAYMOND fasteners, the most suitable solutions. The five types of search and the three associated complimentary searches lead you to the product file, presenting everyone of the selected fastenings under the design shape associated to the many supplied informations (references and indexes, available materials and finishes, mounting tools, client references or names, constituant parts for mountings...) - The first type of search is based on a classification of fasteners functional family (clips, pipe clips, panels fasteners, hose couplings in total).the selection of the characteristics is made the choice of designs in a family tree of five levels, each one corresponding to a type of characteristic ( Families, number of tubes, types of fastener support...). - The second method is based on the elementary functions of the parts ( bolt fastenings, in a hole, on a plane surface...) which are their main functional families. - The third method enables you to search for parts beginning with an A.RAYMOND reference, a client reference or a client name. - The fourth method is programmed to search a component constituting the assembly or for non mounted assembly parts but which must be used together. - Finely, the fifth method is suited to the more knowledgeable. It offers the possibility to combine many methods of search and enables the use of "joker" characters at the time of the definition of certain characteristics. Three complimentary search methods are available, once the main search has started.these methods enable you to refine the product characteristics looked for, from complimentary functions to main functions (resistant to water run-off, vibration absorbing, connectable onto a connector...), the material characteristics, protections-colours and the dimensional criteria. The software has other functional annexes like printing, no matter which screen, listes of solutions or product files, on line help and product information, or posting of all the coordinates of the companies within the group. The software operates on a network and is able to be shared all of the posts connected. A.RAYMOND presents, with this software, an innovative search method in the industrial and computing areas. RASCH/SAFIX Copyright A.RAYMOND a-1
3 GENERAL STRUCTURE OF SAFIX Choice of language Preferences Prints Main Menu Catalogue information Functional help Types of search functional FAMILY basic FORM customer or A.Raymond REFERENCES PIECE OR ASSOCIALE part REFERENCE CODE Number of solutions found Additional criteria additional FUNCTIONS FORM MATERIAL, PROTECTION, COLOURS DIMENSIONNAL requirements Presentation MOSAIC PRODUCT FILE RASCH/SAFIX Copyright A.RAYMOND a-2
4 Numbering at RASCH / SAFIX example : A. RAYMOND - serial part number: or A. RAYMOND - serial part number (without material and surface protection-/colour code) 6 - digits A. RAYMOND - development number (partly): A. RAYMOND - development number 13 - digits E P _ A. RAYMOND - material code: A. RAYMOND - material code 3 - digits A. RAYMOND - surface protection- / colour code: A. RAYMOND - surface protection- / colour code 3 - digits RASCH / RA_hb_b_WE_ _E.xls / RASCH/SAFIX Copyright A.RAYMOND page - 1
5 Structure of family: NUTS A 1. A Nuts Subsequent Spot welding/ Fastening 2. A Cliping on C Pressing in D Screwing on E F Driving in G Into a hole H embedding/ bonding with a screw I moulding Crimping A Simple clip on 3. Clip on with self-positioner into a hole - C D Clip on with self- positioner onto a raised edge Clip on with retaining grips ST or ACME Metric pitch Self-tapping Extra-fine Threaded Hi-Lo MTscrew 4. A C D E F Smooth stem G stem H screw I PT-screw screw screw screw screw pitch screw I Z A ST 2,9 A 6,35 x 12 A M 4 x 0,70 A M 3,5 x 0,60 A NEF N*12 A 2,50 mm A T 4 A 3,2 A 1,8 A 3,00 - ST 3,5 M 5 x 0,80 M 4,0 x 0,70 2,75 mm T 5 3,9 2,2 3,50 C ST 3,9 C M 6 x 1,00 C M 5,0 x 0,80 C 2,80 mm C 4,2 C 2,5 C 4,00 D ST 4,2 D M 7 x 1,00 D 3,00 mm D 4,8 D 3,0 D 4,50 5. E ST 4,8 E M 8 x 1,25 E 4,00 mm E 5,3 E 3,5 E 5,00 F ST 5,5 F M 10 x 1,50 F 5,00 mm F 5,8 F 4,0 F 6,00 G ST 6,3 G M 12 x 1,75 G 6,00 mm G 7,2 G 5,0 H ST 8,0 H M 14 x 2,00 H 6,50 mm H 6,0 I M 16 x 2,00 I 7,0 J M 18 x 2,50 J 10,0 K M 20 x 2,50 this structure has been simplified for lack of space reasons A - With high prevailing torque D - Absorbing displacement of the screw G - Water splash proof J - Designed for automatic assembly - Protected screw point H - Oblique axis K - Anti-creep C - Two/ three screw positions F - Hole stopper I - Earthing clip L - Non paint scratching RASCH-SAFIX_family_tree_EN_ xls RASCH/SAFIX Copyright A RAYMOND C - 1 / 13
6 Structure of family: PIPE AND CALE FASTENERS 1. Pipe and Cable Fasteners A 1 housing E 5 housings I 9 housings M 13 housings Q 17 housings U 21 housings Y 25 housings 2. 2 housings F 6 housings J 10 housings N 14 housings R 18 housings V 22 housings Z >25 C 3 housings G 7 housings K 11 housings O 15 housings S 19 housings W 23 housings D 4 housings H 8 housings L 12 housings P 16 housings T 20 housings X 24 housings housings Even surface with no 3. A No mount C Onto an edge D Into a hole E Onto a stud or screw F Special means of attachment G Composite - A With adhesive A Simple clip A Pressing in A Screwing on A For female mount - Clip with self-positioner Pushing onto a threaded Spot welding, bonding Punching in into a hole stud Clip with self-positioner onto a raised edge C Driving in C C Quarter turn C Locking from the side C 4. D Clip with retaining grips D Fastening with screws or other elements D Locking from above D E Deformable clip E Screwing in E Pushing onto a smooth stem E F Crimping Z F G Wedging in G H For male mount For male and female mount Male and/or female + other standard Other standard Subsequent embedding/moulding Other male shapes Other female shapes this structure has been simplified for lack of space reasons A - Vibration absorbing F - Resistant to water run-off K - Connectable into female fastening P - Connectable onto a connector bracket - With locking lid L - Connectable onto T-rivet Q - Non paint scratching C - Self locking H - Pivoting with respect to the mount M - Connectable into housing for T_rivet R - in-one-piece parts rotating between elements D - Self positionning I - Pivoting between parts N - Connectable onto threaded stud E - Displacement absorbing J - Connectable onto male fastening O - Connectable into housing for threaded stud RASCH-SAFIX_family_tree_EN_ xls RASCH/SAFIX Copyright A RAYMOND C - 2 / 13
7 Structure of family: PANEL FASTENERS C 1. C Panel fasteners One panel edge + one Two non-parallel drilled One drilled panel + A fabric on 2. A Two drilled panels C Several panel edges drilled panel E panels F a stud+ T-rivet G mount Z Onto a Clipping on then pressing in or U shape for 2 touching Locking onto a T- A Pressing into 1 part A A A Punching in, screwing in A A cylindrical punching in parallel edges rivet - mount Pressing on and Fastening and clipping W shape for 2 nontouching parallel edges Punching in twice locking onto a mount Onto a flat 3. Pressing into 2 parts onto 2 parallel panels threaded stud Fastening and clipping S shape for 2 opposing C Locking then pressing in C onto 2 perpendicular C C Pressing in twice parallel edges panel edges Pressing and locking D Quarter turn into 1 part D onto an edge D For 3 edges Z 1/4 turn mounting with E Quarter turn into 2 parts E folding tab E F Punching in F Pushing laterally F G H I Pressing in and punching Pressing in twice Screwing in G H For 1 embedded edge For pressing together 2 parallel edges For 2 perpendicular edges For 2 aligned parallel edges J Spot welding or bonding A Fir tree buttons C D Metallic fir tree clips utton-head studs Spring loaded clips this structure has been simplified for lack of space reasons A - Resistant to water run-off - Insulating clip RASCH-SAFIX_family_tree_EN_ xls RASCH/SAFIX Copyright A RAYMOND C - 3 / 13
8 Structure of family: TRIM AND MOULDING FASTENERS D 1. D Trim and moulding fasteners 2. Locking A Pressing in C Pressing in onto a Clipping on Pushing E Quarter turn G I K in 2 parts threaded off-centre laterally M stud With folding tabs Locking Pushing Flat head onto a D Punching in F H Clipping on J Screwing in L onto smooth O pressing in T- stem rivet Positioning then sliding A - Resistant to water run-off RASCH-SAFIX_family_tree_EN_ xls RASCH/SAFIX Copyright A RAYMOND C - 4 / 13
9 Structure of family: FASTENERS FOR SMOOTH PINS E 1. E Fasteners for smooth pins 2. A Stem + protruding support Stem + massive part C Stem + closed part 3. A Stem end visible - - Stem end not visible A Circular A Circular A 4. Rectangular Rectangular Z C Oblong C Circular Rectangular Oblong Z Z this structure has been simplified for lack of space reasons A - Allowing rotation - Resistant to water run-off C - Insulating clip D - Multiple RASCH-SAFIX_family_tree_EN_ xls RASCH/SAFIX Copyright A RAYMOND C - 5 / 13
10 Structure of family: PLUG UTTON - GROMMET F 1. F Plug button - grommet 2. A Mount with hole Untergrund mit Loch, Kabelbündel A Circular hole A Circular hole Square or rectangular hole Square or rectangular hole 3. C Oblong hole C Oblong hole D Circular/Rectangular D Circular/Rectangular I Several holes I Several holes Z Z A Pressing in A Pressing in Holding, screwing in Holding, screwing in 4. C Spot welding, bonding C Spot welding, bonding D Crimping D Crimping E Quarter turn E Quarter turn Z Z 5. - A Single assembled strand Several separate strand this structure has been simplified for lack of space reasons - RASCH-SAFIX_family_tree_EN_ xls RASCH/SAFIX Copyright A RAYMOND C - 6 / 13
11 Structure of family: FASTENERS FOR LINKAGE ASSEMLIES G 1. G Fasteners for linkage assemblies Translation lock and rotation 2. A Translation lock C Full embedding lock D all and socket joint Z guide A - Allowing rotation - Resistant to water run-off C - Insulating clip D - Multiple RASCH-SAFIX_family_tree_EN_ xls RASCH/SAFIX Copyright A RAYMOND C - 7 / 13
12 Structure of family: QUICK CONNECTORS H 1. H Quick Connectors No products in family 'H' in RASCH/SAFIX (special quick connector catalogue is avaiable upon request) 2. A 'SAE'-Quick connectors 'SAE'-Spigots C Tube connection (T-/L-Type) Z Various 3. A Ø 7,89 Ø 9,49 C Ø 9,89 D Ø 11,80 E Ø 16,00 F Ø 18,00 Z Various 4. A Assemblies Single parts Without additional functions With additional functions 5. A H ody J Spigot K L Retaining ring M Spacer N O connection (T- Z Retaining spring/-clip Protection cap/ -plug Tube /L-Type) Various RASCH-SAFIX_family_tree_EN_ xls RASCH/SAFIX Copyright A RAYMOND C - 8 / 13
13 Structure of family: GLASS SUPPORTS I 1. I Glass supports 2. A An edge + a hole A panel + an edge 3. A Riveting Pressing in A Adhesion Pushing onto a T-rivet C Positioning D Clipping on RASCH-SAFIX_family_tree_EN_ xls RASCH/SAFIX Copyright A RAYMOND C - 9 / 13
14 Structure of family: WASHER SYSTEMS J 1. J Washer Systems 2. A Frontnozzles Rearnozzles C Accessories 3 - and more 3 - and more 3. A 1 - stream 2 - stream C D Fan-spray stream A 1 - stream 2 - stream C D Fan-spray stream A Connectors Check-Valves Zusatzfunktionen: A - Without Check-Valves C - Non-Heated - With integrated Check-Valve D - Heated RASCH-SAFIX_family_tree_EN_ xls RASCH/SAFIX Copyright A RAYMOND C - 10 / 13
15 Structure of family: OTHERS X 1. X RASCH-SAFIX_family_tree_EN_ xls RASCH/SAFIX Copyright A RAYMOND C - 11 / 13
16 Structure of family: ADAPTERS Y 1. Y Adapters Fastening onto stud + Fastening onto stud + Fastening onto stud + Fastening into a hole + Fastening into a hole + A For 2 even surfaces G hole H clip I stud P stud Q standard R Fastening onto even Fastening onto stud + surface + hole J standard S Fastening onto even Fastening onto stud + 2. C surface + clip K others T Fastening onto even Fastening onto edge + D surface + stud L clip U E F Fastening onto even surface + standard Fastening onto even surface + others M N O Fastening onto edge + stud Fastening onto edge + standard Fastening onto edge + others Fastening into a hole + othersm Standard + standard Standard + others others + others - A Single clip A Straight clip - A Pressing in + stud A Into a hole + standard - Double clip Square clip Pressing in + smooth stem 3. C Staggered anchoring Quarter turn + smooth C Double clip C plate stem D Square anchoring plate D Other clips D Riveting + smooth stem E Straight anchoring plate Into a hole + T-rivet this structure has been simplified for lack of space reasons - RASCH-SAFIX_family_tree_EN_ xls RASCH/SAFIX Copyright A RAYMOND C - 12 / 13
17 Structure of family: SPECIAL DESIGN FASTENERS Z 1. Z Special design fasteners 2. A Can lid Tensioning clip C Screw cup E Plastic connector brackets RASCH-SAFIX_family_tree_EN_ xls RASCH/SAFIX Copyright A RAYMOND C - 13 / 13
18 SUMMARY OF THE FORMS For tubular component Onto an edge Into a round hole Into a square or oblong hole Into other shaped holes Anti-vibration system Fastening for female Fastening for male Part to be fastened Part to be Fastening for Fastening screwed in nut mouldings onto an even surface??????????? RASCH / RA_HED4.XLS / RASCH/SAFIX Copyright A.RAYMOND page D - 1
BX2173 Installation Instructions Ford Focus (including the 2.3L engine) 2003 Ford Focus SVT
BX2173 Installation Instructions 2000-04 Ford Focus (including the 2.3L engine) 2003 Ford Focus SVT Serial No. The front fascia, coolant line bracket and anti-pollution devices are removed for baseplate
More informationFREE CLIMBER 4400 ASSEMBLY INSTRUCTIONS 27694B
FREE CLIMBER 4400 ASSEMBLY INSTRUCTIONS 27694B 1 TOOLS REQUIRED: CLAW HAMMER KNIFE 1/2 WRENCH OR SOCKET 1. USE KNIFE TO REMOVE ALL PLASTIC STRAPS FROM AROUND PALLET AND CARTON. STRAP 2. USE CLAW HAMMER
More informationFLOE DOCK FURNITURE WARNING ASSEMBLY INSTRUCTIONS
FLOE DOCK FURNITURE ASSEMBLY INSTRUCTIONS KIT P/N 510-00400-02 KIT P/N 510-00405-02 KIT P/N 510-00406-02 KIT P/N 510-00410-02 WARNING IT IS THE INSTALLER S RESPONSIBILITY TO PROPERLY INSTALL this chair
More informationFig. 2 DORMA-Glas Stand/Issue 02/03 Seite/Page 1/7
FSW Installation instructions Track rail 75 x 72 mm 1. Ceiling substructure and installation of the track rail (Fig. 1): The track rail must be bolted over its entire length (including the stacking track
More informationModel No: TC10. Parts Information: Tyre Changer - Automatic
Page 1 of 11 1 TC10.01 BODY 2 TC10.02 COLUMN 3 TC10.03 HORIZONTAL ARM ASS'Y 4 TC10.04 WASHER 5 TC10.05 RUBBER FOOT 6 TC10.06 COVER 7 TC10.07 SCREW M14x42 8 TC10.08 PRESS COVER 9 TC10.09 STOP-UP 10 TC10.10
More informationFastener Type Chart. Fastener Categories. Sheet Metal Screws Fully threaded screws with a point for use in sheet metal. Abbreviated SMS.
Fastener Categories Wood Screws Machine Screws Thread Cutting Machine Screws Screws with a smooth shank and tapered point for use in wood. Abbreviated WS. Screws with threads for use with a nut or tapped
More informationRH-412 STEEL DOORS INSTALLATION INSTRUCTIONS
RH-412 STEEL DOORS INSTALLATION INSTRUCTIONS By following the steps outlined below, the assembly, installation and adjustment of the steel doors, will be a simple process. Let s start with the Driver Side.
More informationWELDING POSITIONER PARTS BREAKDOWN DRAWING GP-200
WELDING POSITIONER PARTS BREAKDOWN 10 DRAWING GP-200 1 GP-200-001 FRAME 1 2 GK-160-012 5/16"-18UNC x 5/8" CARRIAGE BOLT 6 3 GK-136-055 5/16"Ø LOCK WASHER 6 4 GK-109-052 5/16"-18UNC HEX NUT 10 5 GP-200-002
More informationDublin Stalls Installation Instructions
Dublin Stalls Installation Instructions RAMM Horse Fencing and Stalls 13150 Airport Hwy. Swanton, OH 43558-9615 1-800-434-8456 Rev. 9/13/17 Part Identification Round Track Bracket (4) (Not Painted) Round
More informationClearview Railing System Installation Instructions
Clearview Railing System Installation Instructions Disclaimer: AGS Stainless, Inc. has its Clearview Railing Systems designed by a professional engineer to meet the requirements of the latest national
More informationWARNING. BX Saturn SC Saturn SC Saturn SL, SL Saturn SL2, SW Saturn SW1 Installation Instructions
Please read BOTH these Installation Instructions and the General Instructions before attempting to install or operate this equipment. 1. Blue Ox towing products and accessories are intended to be installed
More informationQuill Stop V2 Installation Guide 11/16/2014
Thank you for purchasing the Quill Stop for the Sieg X3 (Grizzly G0463) and SX3 (Grizzly G0619) mills. Your feedback is always appreciated. Please email questions and comments to gregpriest@cox.net. What
More informationFortress Fe Posts must always be secured to the deck framing. Fortress Fe Posts should never be attached to only the deck boards.
Installation Instructions for Fortress Horizontal Cable Panel System with UB-05 Brackets and Fe Posts It is the responsibility of the installer to meet all code and safety requirements, and to obtain all
More informationSE5a Instrument Board part 2 - rev 1.1
SE5a Instrument Board part 2 - rev 1.1 Fuel (Petrol) Valve This valve uses two circular name plates, eight brass screws, one black plastic base, copper wire and two black plastic risers. You can pick any
More informationINSTALLATION INSTRUCTIONS RH 412 STEEL DOORS
By following the steps outlined below, the assembly, installation and adjustment of the steel doors, will be a simple process. Let s start with the Driver Side. Note: Having the hood open makes the job
More informationBIFOLD FUTON FRAME TRINITY ARM. Seat Rails and Slats x 1. *Note: Use 4pc of 100mm Bolts and 4pc of 60mm Bolts to attach the arms to the Stretchers.
1A Parts in this box. 2pc with extra holes 2pc with extra holes & plastic stoppers Arms x 2 Back Rails and Slats x 1 Full Size: Slat Supports x 6 3pc are longer for the Back deck Back Side Rails x 2 Seat
More informationTIRE RACK INSTALLATION INSTRUCTIONS Dodge Sprinter
Aluminess Products Inc 9402 Wheatlands Ct. #A Santee, CA 92071 619-449-9930 TIRE RACK INSTALLATION INSTRUCTIONS 07-11 Dodge Sprinter Please read before beginning Stainless steel hardware may bind together
More informationStar Trac Turbo Trainer Assembly & Setup
Star Trac Turbo Trainer Use the following procedures to unpack and assemble your Turbo Trainer manufactured by Star Trac. UNPACKING AND PARTS LIST Position the shipping carton so the Heavy End logo is
More information32 Gallon Perforated Square Receptacle
32 Gallon Perforated Square Receptacle 992-031 24 5/" 24 5/" 39 1/2" 30 1/2" ITEM NO. PART NUMBER DESCRIPTION QTY. 1 653-006 Receptacle Base 1 2 653-045 32 Gallon Perforated Side 4 3 653-011 Arch Lid 1
More informationHandout Activity: HA043
Handout Activity: HA043 Student/Intern information: Name Date Class Summary There are many different fasteners used in automotive applications, including screws, bolts, studs & nuts. Washers & chemical
More informationSection D ACCELERATOR
Section D ACCELERATOR 1D Index No. Part No. Description 1. 47-021476-001 Ball Accelerator Box 2. 11-051019-001 Hex Hd. Cap Screw (10 mm x 25 mm) 3. 11-052018-001 Flat Washer (10.5 mm x 21 mm x 2 mm) 4.
More informationR/L, AND LXE TYPE CABLE
OFS Fitel Figure 1. FOR CROSSPLY, R/L, AND LXE TYPE CABLE 636-299-110-05 Comcode: 847 815 297 12A1 Cable Clamp Issue 2 March 2002 2002 OFS Fitel All Rights Reserved Printed in U.S.A. Page 1 of 6 12A1 CABLE
More informationTR FASTENINGS Marine Fasteners
Marine Fasteners TR FASTENINGS EXPERTS IN MARINE FASTENERS AND FIXINGS RE-FIT & MAINTENANCE Marine Fasteners 1. 1. Stayblack finish socket button head A4/316 consul bolts with nylon washer. Used for consul
More informationPlease read BOTH these Installation Instructions and the General Instructions prior to installing or operating this equipment.
2012-14 Chevy Captiva Sport Attachment Tab Height: 21-1/2 Serial Number Attachment Tab Width: 18-1/2 Please read BOTH these and the General Instructions prior to installing or operating this equipment.
More informationAssembly and installation help
Assembly and installation help A supplement to the directions The Purpose of this tutorial is to expand (not replace) upon the directions that come with the system and to help provide shortcuts, the first
More informationBX2520 Installation Instructions 2004 Mazda 3
BX2520 Installation Instructions 2004 Mazda 3 Serial No. The headlight assembly, front fascia, horn bracket and windshield washer reservoir are removed for baseplate installation. Drilling is required.
More informationINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS R5 STEP BOARD APPLICATION: 2009-2017 Dodge Ram 1500 Quad / Crew Cab 2010-2017 Dodge Ram 2500/3500 Crew Cab PART NUMBER: 28-51040, 28-51045, 28-51050, 28-51055 ITEM QUANTITY DESCRIPTION
More informationPlease read BOTH these Installation Instructions and the General Towing Instructions before attempting to install or operate this equipment.
2005-08 Pontiac G6 GT Please read BOTH these and the General Towing Instructions before attempting to install or operate this equipment. 1. Blue Ox towing products and accessories are intended to be installed
More informationSECTION 9: PARTS. Table Breakdown REF PART # DESCRIPTION REF PART # DESCRIPTION
SECTION 9: PARTS Table Breakdown 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 23 25 17 26 27 8 1 P0675001 CAP SCREW M8-1.25 X 30 15 P0675015 SUPPORT BLOCK 2 P0675002 TABLE SUPPORT BLOCK
More informationDepending on the size you ordered you will have either 5 Foot sections which will build the 10 Foot frame or 6 Foot sections which will build the 12
XL Quilting Frame 1 Depending on the size you ordered you will have either 5 Foot sections which will build the 10 Foot frame or 6 Foot sections which will build the 12 Foot frame Printed 2 June 2014 Updated
More informationASSEMBLY AND ADJUSTMENT
EDGE MONITOR ARM EDGE Rev A 2/17 Model EDGE-SLV Model EDGE-BLK Model EDGE-WHT ASSEMBLY AND ADJUSTMENT EDGE MONITOR ARM PARTS AND TOOLS PLEASE REVIEW these instructions before beginning the assembly and
More informationBushwacker Jeep Flat Style Fender Flares Front Pair
Bushwacker Jeep Flat Style Fender Flares Front Pair Note: These instructions involve cutting parts of your vehicle. Please read all instructions prior to starting. Installation Time: 3-4 Hours Tools Required:
More informationelemento In general 2 Weights 2 Parts of the Elemento... 2 Mounting the Elemento.. 3 Placing the power cable... 4 Placing the controls...
elemento In general 2 Weights 2 Parts of the Elemento..... 2 Mounting the Elemento.. 3 Placing the power cable... 4 Placing the controls.... 4 Attaching the brace..5 Placing the arm 6 Adjusting the force..
More informationSpring Loaded All Season Roll-Up Doors
Spring Loaded All Season Roll-Up Doors STAND-OFF MOUNTING METHOD INSTALLATION INSTRUCTIONS READ THIS FIRST Carefully examine the crate(s) for damage before opening. If the carton is damaged, immediately
More informationTOYOTA TACOMA BED EXTENDER Preparation. Part Number: PT
Preparation Part Number: PT392-35120 Kit Contents 1 1 Curved Tube Assembly - Right 2 1 Curved Tube Assembly - Left 3 3 Center Tube 4 1 Hardware Bag 5 1 Installation Instructions 6 1 Care Card Hardware
More informationLeafy Greens Spinner Construction Manual
Leafy Greens Spinner Construction Manual University of Houston Conrad N. Hilton College Food Science Lab Materials list: Base and Armature Approximately 8-1 PVC cut into sections o 3-22.5 o 2-7 o 2-4 o
More informationFABA. Installation Instructions. Conductor Bar System. Publication #FABA-03 3/1/04 Part Number: Copyright 2004 Electromotive Systems
FABA Conductor Bar System Installation Instructions Publication #FABA-03 3/1/04 Part Number: 005-1062 Copyright 2004 Electromotive Systems 1S 100 Z Installation Instructions Contents: Basic Diagram - -
More information12. Wings, Flaps, Ailerons and Struts
12. Wings, Flaps, Ailerons and Struts Fit Aileron Hinges Reference: Drawing 20270K2 Photo 12.1 Parts Required: 2007092 Aileron LS 200809N Aileron RS 2001394 Hinge 3/16 A1 (4) 2001694 Hinge Pin (4) PH0059N
More informationFRONT BUMPER INSTALLATION INSTRUCTIONS Toyota 4Runner
Aluminess Products Inc 9402 Wheatlands Ct. #A Santee, CA 92071 619-449-9930 FRONT BUMPER INSTALLATION INSTRUCTIONS 2003-2009 Toyota 4Runner Please read before beginning Stainless steel hardware may bind
More informationFortress Railing Overview ACTUAL FREIGHT CHARGES APPLY TO ALL FORTRESS RAIL ORDERS
Fortress Railing Overview 4 3 1 Fe 26 Iron Railing Systems Fortress Use the steps below for the following pages to complete your rail Vertical Cable and Glass Options Available Fortress Iron Railing System
More informationService installation of hardtop Installing hardtop
Service installation of hardtop Installing hardtop â Lower side windows as far as they will go. â Retract (if necessary unscrew) radio aerial. â Switch off ignition. â If necessary, remove wind deflector.
More information(2) 25mm x 20mm x 5mm Adhesive Backed Foam Pads. 100mm x 50mm x 1.0mm Adhesive Backed Foam. (2) Spacer Plates. Passenger/Right Side Frame Mounting
PARTS LIST: 1 Grille Guard 10 12mm Lock Washers 1 Driver/Left Frame Mounting 16 12mm x 32mm OD x 3mm Flat Washers 1 Passenger/Right Frame Mounting 8 12mm Hex Nuts 1 Driver/Left Side Top Support 2 10-1.50mm
More informationHYDRAULIC CONTROL DETAILS PARTS LIST
Always give model number, serial number and part number when ordering repair parts. HYDRAULIC CONTROL DETAILS PARTS LIST REF NO. PART NUMBER DESCRIPTION 1 101939 Hydraulic Tank 2 101940 Hydraulic Tank
More informationIntroduction. Rocky Mountain Westy Swing Away Carrier Kit Installation Instructions
Rocky Mountain Westy Swing Away Carrier Kit Installation Instructions Introduction Thank you for purchasing the Rocky Mountain Westy Swing Away Carrier Kit. We pride ourselves in the products we develop
More informationSuited to vehicle/s SIDE RAIL 2 DOOR (SWB) SIDE RAIL 4 DOOR (LWB) WARNING
Part Number Product Description Suited to vehicle/s Fitting Kit Number 4450200 SIDE RAIL 2 DOOR (SWB) 6172268 4450210 SIDE RAIL 4 DOOR (LWB) 6172253 ALSO, NOTE THE FOLLOWING: WARNING This product must
More informationINSTALLATION INSTRUCTIONS CONTOURED LIGHT BAR APPLICATION: CHEVY EQUINOX/ GMC TERRAIN PART NUMBERS: ,
INSTALLATION INSTRUCTIONS CONTOURED LIGHT BAR APPLICATION: 2010-2014 CHEVY EQUINOX/ GMC TERRAIN PART NUMBERS: 32-21020, 32-21025 ITEM QUANTITY DESCRIPTION TOOLS NEEDED 1 1 CONTOUR BAR TORQUE WRENCH 2 1
More informationIsuzu D-Max Part Numbers Black Polished
SB007 Sports Bar Fitting Instructions Isuzu D-Max 0 Part Numbers - 55000 - Black - 5000 - Polished Installation Time: 0 min (Approximately) PLEASE KEEP INSTRUCTIONS IN GLOVE BOX FOR FURTHER USE RECOMMENDED
More informationaluminium profile system
aluminium profile system 63 AME System aluminium profiles overview series profiles introduction 80x80 x80 x80/180 x Aluminium profiles are provided with longitudinal grooves which can be used in conjunction
More informationClamping devices 521
Clamping devices 521 522 Product overview Clamping devices Adjustable straps K0001 Hook clamps K0012 Goose-neck straps with long slot K0002 Page 526 Hook Clamps with collar K0013 Page 535 Equipped clamps
More informationCRYSTEEL S. this manual must be included with the vehicle after completing the installation.
Website: www.tbei.com E-mail: sales@tbei.com CRYSTEEL S Grain Tipper mounting and operating instructions this manual must be included with the vehicle after completing the installation. Web Site E-Mail
More informationDura-Lock Roof System
DLR-14 Dura-Lock Roof System Assembly and Installation Instructions Read the instructions before starting the job. They explain the steps required to produce a finished product that will meet factory specifications.
More information50, ,000 18,800 8,000. CODE 04 ER (ER ) UPC Chuck/W ITS Central Chuck. CODE 04 ER (ER ) UPC Pallet For Alignment
CODE 04 ER-007826 (ER-017777) UPC Pallet For Alignment CODE 04 ER-007823 (ER-016092) UPC Chuck/W ITS Central Chuck Application To align angular position and to determine the center of UPC chucks. Please
More informationSECTION 7. SAFETYING
9/8/98 AC 43.13-1B SECTION 7. SAFETYING 7-122. GENERAL. The word safetying is a term universally used in the aircraft industry. Briefly, safetying is defined as: Securing by various means any nut, bolt,
More informationIF YOU DON T SEE IT HERE
www.smithfast.com Drills & Taps & Bits Screws Cotter Drilling Bolts / Hex Capscrews Lag Carraige Hitch Grade 8 Machine Grade Elevator 5 Sheet Spring Metal Roll Grade Eye 2 Square Taper Head set A325 Hex
More informationSTYLE BAR & TONNEAU COVER INSTALLATION
STYLE BAR & TONNEAU COVER INSTALLATION INSTALLATION MANUAL: 2005 to '09 Mustang P/N: 10-8002-C12071B Saleen Performance, Inc. 1225 East Maple Rd., MI 48083 800-888-8945 www.saleen.com 1 IF YOU ARE NOT
More informationFord Pick Up Rear leaf Spring Kit Installation Instructions
1948-1956 Ford Pick Up Rear leaf Spring Kit Installation Instructions 1-800-984-6259 www.totalcostinvolved.com Parts 48 inch leaf (2) springs (4) U-bolts 3/8-24 x l 1/4bolts (16) & nuts (2) 1/2-20 x 4
More informationHorizontal Cable Systems
ALUMINUM RAILING INSTALLATION INSTRUCTIONS v2012 orizontal Cable Systems 1) Check Contents Of Packages: Verify that all parts have arrived and that they match the packing list. 1A) Coastal applications:
More informationB Connectors. Automation. Structural Framing System Connectors & Fasteners
BContents B Connectors Gussets... 2 End Fasteners... 4 Anchor Fasteners... 5 Angle Brackets... 6 45 Support Brackets... 8 Butt Fasteners... 9 Hinged Support Brackets... 10-13 Joining Plates... 14-18 Nuts
More informationBX1965 Installation Instructions 2004 Chrysler Sebring Convertible
BX1965 Installation Instructions 2004 Chrysler Sebring Convertible Serial No. The headlight assembly, front fascia, horn bracket and windshield washer reservoir are removed for baseplate installation.
More informationMOTORIZED STANDARD SHADE WITH CABLES Installation Instructions
Tools Needed Drill Measuring Tape Pencil 2 Level Plumb Line ¼ Masonry Drill Bit Hammer Linesmans Pliers Cable Cutters Phillips & Flat-Head Screw Driver 11/32 Socket or Open End Wrench 5/32 Allen Wrench
More informationThe Phoenix. Professional Quilting Frame. Copyright January 1, 2016 Jim M. Bagley, GraceWood, Inc (Reproduction Prohibited) Version 2.
The Phoenix Professional Quilting Frame Copyright January 1, 2016 Jim M. Bagley, GraceWood, Inc (Reproduction Prohibited) Version 2.1 1 The Phoenix Professional Quilting Frame Parts List Box 1...3 Box
More informationPlease read BOTH these Installation Instructions and the General Instructions prior to installing or operating this equipment.
Attachment Tab Height: 19-1/2 Attachment Tab Width: 19 Serial Number Please read BOTH these and the General Instructions prior to installing or operating this equipment. 1. Blue Ox towing products and
More information8' x 22' Cash Hut INSTALLATION INSTRUCTIONS
PARTS IST J I G A A J I C F D E B B K H A A K H G A Posts w/ Feet (4pcs) J eft End Panels (Front & Back) [4'3"x7'8"] (2pcs) B 22' Peak Trusses (2pcs) K Right End Panels (Front & Back) C 8' Centre Truss
More informationMain Drive Components
Pipe and Bolt Threading Machine Main Drive Components 0 0 Rear Centering Head Centering Jaw Set Spiral Pins () 00 Centering Scroll Retaining Ring 0 Rear Bearing 0 Oil Ball Valve () # - x / Screw Motor
More informationCable Tray Kit: - Cable Tray - Cable Tray Cover - Power Block Support (x2) Top Support Kit: (x2) - 2 Top Supports. Quantities are per bench
Parts Included (per back to back bench) Column Kit: (x2) - 1 LH & 1 RH Column - Control Box - Hand Switch Cable Tray Kit: - Cable Tray - Cable Tray Cover - Power Block Support (x2) Depth Support Kit: -
More informationFortress Fe Posts must always be secured to the deck framing. Fortress Fe Posts should never be attached to only the deck boards.
Installation Instructions for FortressCable H-Series Cable Panel System With UB-05 Brackets and Fe Posts It is the responsibility of the installer to meet all code and safety requirements, and to obtain
More informationPlease read BOTH these Installation Instructions and the General Towing Instructions before attempting to install or operate this equipment.
Serial Number BX3231 2005-08 Pontiac G6 GT Please read BOTH these and the General Towing Instructions before attempting to install or operate this equipment. 1. Blue Ox towing products and accessories
More informationBig Block Installation Manual For Systems without A/C
Big Block Installation Manual For Systems without A/C Billet Specialties, Inc. 500 Shawmut Ave. La Grange, IL 60526 Tech Line (708) 588-0505 Fax (708) 588-7181 Hardware List For Chevrolet Big Block Tru
More informationTOYOTA TACOMA BED EXTENDER Preparation. Part Number: PT General Applicability All 2012 and newer Tacoma models
Preparation Part Number: PT392-35120 Kit Contents 1 1 Curved Tube Assembly - Right 2 1 Curved Tube Assembly - Left 3 3 Center Tube 4 1 Hardware Bag 5 1 Installation Instructions 6 1 Care Card Hardware
More informationINSTALLATION INSTRUCTIONS 1PC FRONT BUMPER JEEP JK WRANGLER
INSTALLATION INSTRUCTIONS PARTS LIST: 1 1PC Bumper 2 8mm x 25mm Hex Bolts 1 Bull Nose Hoop 2 8mm x 16mm Hex Bolts 1 Fairlead Mounting Bracket 6 8mm x 24mm x 2mm Flat Washers 8 12mm x 35mm Hex Bolts 4 8mm
More informationMECHANICAL ASSEMBLY John Wiley & Sons, Inc. M. P. Groover, Fundamentals of Modern Manufacturing 2/e
MECHANICAL ASSEMBLY Threaded Fasteners Rivets and Eyelets Assembly Methods Based on Interference Fits Other Mechanical Fastening Methods Molding Inserts and Integral Fasteners Design for Assembly Mechanical
More informationASSORTMENTS BRONZECLASSWB Above assortment with one #99901 Cabinet, 17 extra dividers, all drawers pre-labeld inside and out.
ASSORTMENTS 34 s BRONZECLASS Body Shop Fastener Starter 71 of the most popular items - Over 1700 pieces. Fasteners Only - No Bins Box Qty. 1 Inside of drawer BRONZECLASSWB Above assortment with one #99901
More informationInstallation Instruction
Tools Needed for Assembly Stud finder (for wood stud wall) Pencil Mark Electric drill Wood Stud Wall Installation Step 1. Locate the Wood Studs Installation Instruction Drill bit (for wood stud wall) Masonry
More informationGiraud Tool Company, Inc.
Motor Upgrade for Gracey Trimmer This package is intended to allow the user to upgrade their Gracey trimmer with a higher rpm motor and convenience features not found in the production offering. This upgrade
More informationABSORB 350 Crash Cushion Product Specifications
ABSORB 350 Crash Cushion Product Specifications Product Specification: ABSORB 350 TL-2 Non Re-directive, Gating, Crash Cushion Applied to Permanent or Portable Concrete Barrier I. General The ABSORB 350
More informationV Installation instructions, accessories. Auxiliary seat. Volvo Car Corporation Gothenburg, Sweden V70 (00-08) 2002
Installation instructions, accessories Instruction No 8624018 Version 1.3 Part. No. 30749269, 30749270, 30749271, 30749272, 30749273, 30749274 Auxiliary seat M8901699 Volvo Car Corporation Auxiliary seat-
More informationIndex Pipe Hangers and Straps
Index Pipe Hangers and Straps Fig. 1 Standard Clevis Hanger MSS-SP-69, Type 1 WW-H-171E, Type 1 Page 14 Fig. 1CI Clevis Hanger for A.W.W.A. Page 16 Fig. 81 Clevis Hanger WW-H-171E, Type 12 Page 70 Fig.
More informationINSTALLATION INSTRUCTIONS GRILLE GUARD RAM 1500 PART # 5058/5058-2
INSTALLATION INSTRUCTIONS GRILLE GUARD PART # 5058/5058-2 PARTS LIST: Qty Description Qty Description 1 Grille Guard 8 12-1.75mm x 35mm Hex Bolts 2 Upper Frame Mounting s (for trucks without tow hooks
More informationSection D ACCELERATOR
Section D ACCELERATOR December 2009 1D Index 1. 47-021476-001 Ball Accelerator Box 2. 11-051019-001 Hex Hd. Cap Screw (10 mm x 25 mm) 3. 11-052018-001 Flat Washer (10.5 mm) 4. 47-021249-004 Ball Cushion
More informationEDGE2 DUAL MONITOR ARM
EDGE2 DUAL MONITOR ARM EDGE2 Rev A 2/17 Model EDGE2-SLV Model EDGE2-BLK Model EDGE2-WHT ASSEMBLY AND ADJUSTMENT EDGE2 DUAL MONITOR ARM PARTS AND TOOLS PLEASE REVIEW these instructions before beginning
More information25000 Series Lo-T TM Butterfly Control Valve Instructions
November 2001 25000 Series Lo-T TM Butterfly Control Valve Instructions Instruction No. 25.1:IM PRELIMINARY STEPS Before installation, note the flow direction arrow on the valve body. The flow should enter
More informationSimplex Baseboard System Baseboard System
Simplex Baseboard System Baseboard System I Complete installation programme I Trouble-free and time-saving installation I Various connection kits for all types of pipe Our service to you I Simplex Products
More informationPreference Collection 5543 Central Console INSTALLATION GUIDE
Preference Collection 5543 Central Console INSTALLATION GUIDE WARNING Failure to install the 5543 as described in this installation guide may cause the unit to collapse, resulting in serious injury to
More informationINSTALLATION GUIDE 2009-CURRENT HUMMER H3T PRODUCT CODE:
INSTALLATION GUIDE 2009-CURRENT HUMMER H3T PRODUCT CODE: 268 June 22, 2010 TOOLS NEEDED COMPONENTS INCLUDED P2 Tip 3/8" Drill Rubber Gasket(s) x 2 Bracket(s) x 2 1/2" Drill Bit Bulkhead Flange #2 Phillips
More informationBX1956 Installation Instructions Chrysler PT Cruiser (Include Turbo)
BX1956 Installation Instructions 2001-04 Chrysler PT Cruiser (Include Turbo) Serial No. The front fascia and metal bumper are removed for baseplate installation. Factory metal bumper will not be reinstalled.
More informationEP-60 END OF CAR JUNCTION BOX KIT and ASSEMBLY AND INSTALLATION INSTRUCTIONS
EP-60 END OF CAR JUNCTION BOX KIT 786282 and 786438 ASSEMBLY AND INSTALLATION INSTRUCTIONS Figure 1 EP-60 End of Car Junction Box Kit Item No. Qty. Description P/N Kit No. 786282 Kit No. 786438 1 2 Screw,
More informationLCD LIFT Flat Panel Display System Installation Manual. Table of Contents
LCD LIFT Flat Panel Display System Installation Manual Table of Contents Page Installation Overview... 2 Trim Ring Installation... 3 LCD Lift Installation....4 Actuator Switch Installation.5 Top Plate
More informationDO35 MAINTENANCE INSTRUCTIONS
CUSTOMER INFORMATION SHEET NO. 038 DO35 MAINTENANCE INSTRUCTIONS (DO35 V3 LAUNCHED PRODUCTION JUNE 2017) Table of Contents 1.0 Replacing Spindle Bushes V3... 22 2.0 Replacing Locking Mechanism V3... 6
More informationInstallation for Full Size Polaris Ranger Crew Doors
Installation for Full Size Polaris Ranger Crew Doors Order of Installation: Heater Doors Wiper on to Windshield Windshield Top & Back Panel Note: Most of the steps in these instructions need to be repeated
More informationROMAN AND. Roller Lift System Continuous Cord Loop GETTING STARTED BRACKET INFORMATION INSIDE MOUNT. A few simple tools are required:
ROMAN AND WOVEN WOOD SHADES Roller Lift System Continuous Cord Loop GETTING STARTED BRACKET INFORMATION A few simple tools are required: The brackets you received with your product are REQUIRED for proper
More informationinstallation instructions WC Frame 1180mm with Dual Flush Cistern
installation instructions WC Frame 1180mm with Dual Flush Cistern (C,D,E) K F/G N L M 12 13 14 16 1 2 11 A 5 6 Q O Y 3 C 10 E D B P,Z,AA R T V S 4 U 2 No. Part no. Description Quantity A WC Frame with
More information1/2/2016. Lecture Slides. Screws, Fasteners, and the Design of Nonpermanent Joints. Reasons for Non-permanent Fasteners
Lecture Slides Screws, Fasteners, and the Design of Nonpermanent Joints Reasons for Non-permanent Fasteners Field assembly Disassembly Maintenance Adjustment 1 Introduction There are two distinct uses
More informationDAEDALUS TECHNOLOGIES, INC. MAKING TECHNOLOGY MORE ACCESSIBLE
DAEDALUS TECHNOLOGIES, INC. MAKING TECHNOLOGY MORE ACCESSIBLE DAESSY Mounting System Frame Clamps for Wheelchair Mounting Frame Clamp Inner Piece Styles When ordering a complete DAESSY Wheelchair mounting
More informationBX Toyota Tacoma (Includes Prerunner) Installation Instructions
Attachment Tab Height: 11.5 Attachment Tab Width: 30.5" Serial Number Please read BOTH these and the General Instructions prior to installing or operating this equipment. 1. Blue Ox towing products and
More informationHardware & Ironmongery Ramp and door fasteners Door stops Nuts, bolts & washers
Hardware & Ironmongery Ramp and door fasteners Door stops Nuts, bolts & washers Hinge Nuts Spring Bolt Washers Bolts - Hinge Contents Ramp and door accessories: Hinges, spring bolts, antiluce plates, gas
More informationParts Manual. Models 521 SSE (621502X37NA) 521 SSR (621503X37NA) &
Parts Manual Models 521 SSE (621502X37NA) 521 SSR (621503X37NA) 1740273 & 1740275 11.2006 Table Of Contents PRODUCT COMPONENTS PAGES Handle Group... 4 Engine Group... 6 Frame Group... 8 Auger Housing
More informationWASP Extended Shuttle Fitting. Process Overview
Process Overview Tools needed; metric Hex key set Remove Wasp Plate sealer from all power and pneumatic supplies; situate the unit on a clear work area for access. Ensure the Wasp plate sealer has cooled
More informationIDR assembly instructions:
IDR assembly instructions: Required Tools: 2 X 12mm Open End Wrench 14mm open end wrench #2 Phillips Head Screw Driver (Drill with adjustable torque clutch recommended) 8mm nut driver (Supplied in IDR-AK)
More informationFlat Style Fender Flares Rear Pair. Jeep. Included in Hardware Kit:
Jeep Flat Style Fender Flares Rear Pair STEP 1 PRIOR TO INSTALLATION A) Bushwacker only approves installing the fl ares according to these written instructions with the hardware provided. WARNING: Failure
More informationbridges Installation Manual
bridges Installation Manual 0 OHSAS 800:007 CGSB #0HS-009 ISO 900:008 CGSB #96- ISO 00:00 CGSB #EMS-00 Global Contract Inc. 6 Petrolia Road North York, Ontario, MJ X8 Visit us on the Internet at globalcontract.com
More information