08 36 13/HAS BuyLine 0053 COMMERCIAL STEEL AND ALUMINUM SECTIONAL DOORS Meeting the most demanding specifications. see us at.com
Commercial Insulated Sectional Doors Haas Door foamed-in-place polyurethane insulated doors (THERMAPRO, HAAS THERM and MISERTHERM ) combine the strength of steel construction with the energy efficiency of a polyurethane foam core. THERMAPRO Thermapro insulated sectional doors are 3 thick with pressure injected CFC-free polyurethane foam with a calculated R-value of 25.8. Model CHT-850 has tempered aluminum face sheets with 24-gauge stucco texture with V-grooves on the exterior and interior faces. Model CHT- 832 has galvanized steel face sheets with a 20-gauge flush smooth surface on the exterior face and a 26-gauge woodgrain texture with V-grooves on the interior (20-gauge is optional on the interior). Model CHT-816 has galvanized steel face sheets with 26-gauge woodgrain texture with V-grooves on the exterior and interior faces. Section joints are tongue-andgroove for wind resistance. Sections have 16-gauge steel end stiles and full vertical steel back-up plates for increased strength and solid face hardware attachment points. HAAS-THERM Haas-Therm insulated sectional doors are 1-3/4 thick with pressure injected CFC-free polyurethane foam with a calculated R-Value of 16.18. Model CHT-750 has tempered aluminum face sheets with 24-gauge stucco texture with V-grooves on the exterior and interior faces. Model CHT-732 has galvanized steel face sheets with a 20-gauge flush smooth surface on the exterior face and a 26-gauge woodgrain texture with V-grooves on the interior (20-gauge is optional on the interior). Model CHT-716 and CHT-712 have galvanized steel face sheets with 26-gauge woodgrain texture with V-grooves on the exterior and interior faces. Section joints are tongue-and-groove for wind resistance. Sections have 16-gauge steel end stiles (optional on some models) and full vertical steel back-up plates for increased strength and solid face hardware attachment points. MISER-THERM Polyurethane Door Thickness 1 3/8" 1 3/4" 3" Joint Detail Vinyl Top Weatherseal Thermal Break Polyurethane 2 Miser-Therm insulated sectional doors are 1-3/8 thick with pressure injected CFC-free polyurethane foam with a calculated R-Value of 13.45. Model CMT-632 has galvanized steel face sheets with a 20-gauge flush smooth surface on the exterior face and a 26- gauge woodgrain texture with V-grooves on the interior (20-gauge is optional on the interior). Model CMT-616 and CMT-612 have galvanized steel face sheets with 26-gauge woodgrain texture with V-grooves on the exterior and interior faces. Section joints are tongue-and-groove for wind resistance. Sections have 16-gauge steel end stiles (optional on some models) and full vertical steel back-up plates for increased strength and solid face hardware attachment points. Commercial Insulated Steel Door Selection Guide Bottom Detail Door Face Flush Flush V-Groove Steel Super Calculated Calculated Model Thickness Sheet Panel Panel Wood Grain End Heavy Heavy Std. R U Material Smooth Stucco Stiles Duty Duty Duty Value Value CHT-850 3" Alum. 25.8 0.039 CHT-832 3" Steel 25.8 0.039 CHT-816 3" Steel 25.8 0.039 CHT-750 1-3/4" Alum. 16.18 0.062 CHT-732 1-3/4" Steel 16.18 0.062 CHT-716 1-3/4" Steel 16.18 0.062 CHT-712 1-3/4" Steel 16.18 0.062 CMT-632 1-3/8" Steel 13.45 0.074 CMT-616 1-3/8" Steel 13.45 0.074 CMT-612 1-3/8" Steel 13.45 0.074 U-Shaped Astragal
Commercial Steel Sectional Doors Haas Door Commercial Steel Sectional Doors (Models 220, 220-L, 220-S, 224, 224-L, 224-S, 224-E, 224-EL and 224-ES) provide an economical yet durable solution for many overhead sectional door applications. Models 220, 220-L and 220-S Commercial steel sectional doors are 2 thick and roll formed from 20 gauge galvanized steel in a semi-flush configuration with a smooth finish. Model 220 is not insulated. Model 220-L contains inserted, polystyrene foam insulation with a laminated vinyl type back panel. Model 220-S contains inserted, polystyrene foam insulation with a 26 gauge steel back panel. Section joints are tongue-and-groove for wind resistance. Sections have hot-dipped galvanized steel end stiles and intermediate stiles for increased strength and solid face hardware attachment points. Models 224, 224-L and 224-S Commercial steel sectional doors are 2 thick and roll formed from 24 gauge galvanized steel in a semi-flush configuration with a smooth finish. Model 224 is not insulated. Model 224-L contains inserted, polystyrene foam insulation with a laminated vinyl type back panel. Model 224-S contains inserted, polystyrene foam insulation with a 26 gauge steel back panel. Section joints are tongue-and-groove for wind resistance. Sections have hot-dipped galvanized steel end stiles and intermediate stiles for increased strength and solid face hardware attachment points. Joint Detail 26 Ga. Steel Backer Panel Polystyrene Models 224-E, 224-EL and 224-ES Commercial steel sectional doors are 2 thick and roll formed from nominal 24 gauge galvanized steel in a semi-flush configuration with a smooth finish. Model 224-E is not insulated. Model 224-EL contains inserted, polystyrene foam insulation with a laminated vinyl type back panel. Model 224-ES contains inserted, polystyrene foam insulation with a 26 gauge steel back panel. Section joints are tongue-and-groove for wind resistance. Sections have hot-dipped galvanized steel end stiles and intermediate stiles for increased strength and solid face hardware attachment points. U-Shaped Astragal Bottom Detail 4 Commercial Steel Sectional Door Selection Guide Door Face Vinyl- Steel- Steel Super Calculated Calculated Model Thickness Sheet Backed Backed End Heavy Heavy Std. R U Material Stiles Duty Duty Duty Value Value 220 2" Steel NA NA 220-L 2" Steel 7.35 0.136 220-S 2" Steel 7.35 0.136 224 2" Steel NA NA 224-L 2" Steel 7.35 0.136 224-S 2" Steel 7.35 0.136 224-E 2" Steel NA NA 224-EL 2" Steel 7.35 0.136 224-ES 2" Steel 7.35 0.136
Commercial Sectional Doors Models CA110 & CA-220 Haas Door Aluminum Sectional Doors (Models CA-220 and CA110) are strong, handsome and durable and the No. 1 choice of commercial and industrial architects. Ideal for fire houses, car washes, auto service centers, dealerships, and tire stores. Model CA-110 Narrow Line Frame Sections are assembled using 0.065 minimum aluminum alloy, tubular extrusions with bolt through construction. Sections are 1-3/4 thick. Any section height is available. Bottom rails, top rails and end stiles are 3 on doors up to 13-11 wide. Doors 14-0 wide and greater have 4 bottom rails. All doors wider than 12-0 have built in struts on each section. All aluminum is clear anodized as standard. Color anodizing and special paint finishes are optional. Panels for solid sections are 0.040 stucco embossed or 0.050 smooth aluminum. A wide variety of glazing materials are available. Model CA-220 Heavy Duty Frame Sections are assembled using 0.065 minimum aluminum alloy, tubular extrusions with bolt through construction. Sections are 1-3/4 thick. Any section height is available. Bottom rails, top rails and end stiles are 4 on doors up to 17-11 wide. Doors 18-0 wide and greater have a 6 bottom rails, top rail and end stiles. All doors wider than 12-0 have built in struts on each section. Doors greater than 18-0 have an additional T shaped cap strut on all sections. All aluminum is clear anodized as standard. Color anodizing and special paint finishes are optional. Panels for solid sections are 0.040 stucco embossed or 0.050 smooth aluminum. A wide variety of glazing materials are available. Commercial Aluminum Rail/Stile Dimensions Models CA-220 CA-110 Width up to 8' 0" to 16' 2" 8' 0" to 16' 2" 8' 0" to 16' 2" 8' 0" to 16' 2" 8' 0" to 16' 2" Center Stiles 2 1/2" 2 1/2" 2 1/2" 1 5/16" 1 5/16" End Stiles 4" 4" 4" 3" 3" Top Stiles 4" 4" 4" 3" 3" Meeting Rail 4" 4" 4" 2 1/2" 2 1/2" Bottom Rail 4" 6" 6" 3" 4" Commercial Aluminum Panels Door Width Panels Width Up to 8' 11" 2 9' 0" to 11' 11" 3 12' 0" to 15' 11" 4 16' 0" to 19' 11" 5 20' 0" to 21' 11" 6 22' 0" to 24" 2" 8 6
Track Detail and Space Requirements "C" "C" "D" HEADROOM "A" PLUS "B" 2" 12" RADIUS 15" RADIUS 20" RADIUS 32" RADIUS 'C' 'A' 'B' 'A' 'B' 'A' 'B' 'A' 'B' UP TO 8'-0" 13" 4" 16" 7" 21" 12" 30" 21" 114" 8'-1" TO 10'-0" 13" 4" 16" 7" 21" 12' 30" 21" 138" 10'-1" TO 12'-0" 15" 4" 18" 7" N/A N/A N/A N/A 162" 12'-1" TO 14'-0" 15" 4" 18" 7" N/A N/A N/A N/A 186" 14'-1" TO 16'-0" N/A N/A 18" 7" N/A N/A N/A N/A 210" 3" 'A' 15" RADIUS 'B' 'C' 17" 7" 117" UP TO 8'-0" 8'-1" TO 10'-0" 17" 7" 141" 10'-1" TO 12'-0" 19" 7" 165" 12'-1" TO 14'-0" 19" 7" 189" 14'-1" TO 16'-0" 19" 7" 213" 16'-1" TO 18'-0" 19" 7" 237" 18'-1" TO 20'-0" 20" 7" 261" HEADROOM "A" (FRONT MOUNT) PLUS "B" 2" FRONT MOUNT REAR MOUNT 6" LHR 3" LHR 6" LHR 3" LHR 'C' 'A' 'B' 'A' 'B' 'A' 'D' 'A' 'D' UP TO 8'-0" 11" 1" 9" -1" 6" 5" 3.5" 6" 114" 8'-1" TO 10'-0" 11" 1" 9" -1" 6" 5" 3.5" 6" 138" 10'-1" TO 12-0 13" 1" 11" -1" 6" 5" 3.5" 7" 162" 12'-1" TO 14-0 13" 1" 11" -1" 6" 5" 3.5" 7" 186" 14'-1" TO 16-0 13" 1" 11" -1" 6" 5" 3.5" 7" 210" 3" FRONT MOUNT REAR MOUNT 'C' 'A' 'B' 'A' 'D' UP TO 8'-0" 13" 1" 7" 6" 117" 8'-1" TO 10'-0" 13" 1" 7" 6" 141" 10'-1" TO 12-0 15" 1" 7" 7" 165" 12'-1" TO 14'-0" 15" 1" 7" 7" 189" 14'-1" TO 16'-0" 15" 1" 7" 7" 213" 16'-1" TO 18'-0" 15" 1" 7" 7" 237" 18'-1" TO 20'-0" 17" 1" 7" 8" 261" SPRING COUNTERBALANCE (REAR MOUNT) Regular Lift Low Headroom MINUS HIGH LIFT PLUS 18" HEADROOM EQUALS HIGH LIFT PLUS "A" HIGH LIFT 2" PLUS HIGH LIFT 54" HL OR 120" HL 164" HL LESS OR LESS OR LESS 'A' 'A' 'A' UP TO 11'-0" 9" 13" N/A 11'-1" TO 16'-0" 12" 13" 15" 3" 54" HL OR 120" HL 164" HL LESS OR LESS OR LESS 'A' 'A' 'A' UP TO 11'-0" 9" 13" N/A 11'-1" TO 18'-0" 12" 13" 15" 18'-1" TO 20'-0" 13" 13" 15" Opening Width Jamb High Lift Sideroom Clearence 2" Track = 3-3/4" 3" Track = 4-1/4" Add 1" for LHR Add 1/2" @ Header Opening Width Reverse Angle Weatherseal Vertical Lift 1" Sideroom Clearence 2" Track = 3-3/4" 3" Track = 4-1/4" Add 2" for LHR Add 2" @ Header ANGLE OR BRACKET MOUNTED - WOOD REVERSE ANGLE MOUNTED - STEEL 320 Sycamore Wauseon, OH 43567 Tel: 1-866-637-3667 Fax: 1-800-874-4227 www.haasdoor.com