TYPICAL AND PATTERNS FOR MAX-RIB S MAX-RIB (PATTERN #1) @ 1'-8" O.C. (MAX.) ROLL TAPE SEALANT @ SEAMS MAX-RIB @ 1'-8" O.C. (MAX.) ROLL TAPE SEALANT @ SEAMS MAX-RIB TRIM (PATTERN #3) NOTE: TAPE SEALANT ON WALL SEAMS AND BOTH SIDES OF CLOSURE IS OPTIONAL. 1
TYPICAL AND PATTERNS FOR MESA MESA 1 3 4 2 1 FASTENER SEQUENCE (PATTERN #1) @ 1'-8" O.C. (MAX.) (SEE NOTE #3) ROLL TAPE SEALANT @ SEAMS (SEE NOTE 2) MESA 1 3 4 5 2 1 FASTENER SEQUENCE @ 1'-8" O.C. (MAX.) (SEE NOTE #3) ROLL TAPE SEALANT @ SEAMS (SEE NOTE #2) MESA TRIM 1 3 4 2 1 FASTENER SEQUENCE (PATTERN #3) FASTENER PATTERN #1 At intermediate supports: 1 1/2" on each side of major ribs. FASTENER PATTERN #2 At base, eave, ridge & lap: 1 1/2" on each side of major ribs. NOTES: 1.) TAPE SEALANT NOT REQUIRED FOR WALL SEAMS OR BOTH SIDES OF CLOSURE. 2.) TAPE SEALANT NOT REQUIRED FOR 3:12 OR GREATER SLOPES. 3.) S MAYBE REQUIRED FOR ENGINEERING DIAPHRAGM BRACING. 2
BASE TRIM DETAIL BASE FRAME COLUMN BASE FRAME COLUMN (RECOMMENDED) FASTENER (RECOMMENDED) FASTENER FINISHED FLOOR RODENT GUARD BASE FLASHING FRAME COLUMN RODENT GUARD (P-RG) FINISHED FLOOR FASTENER BASE FLASHING "B" (P-BFB) (RECOMMENDED) BASE FLASHING BASE FLASHING "A" BASE AND DRIP FLASHING (P-DF) 3
OUTSIDE CORNER DETAIL (PATTERN #1) @ BETWEEN @ 1'-8" O.C. (MAX) POST RIB OUTSIDE CORNER TRIM RIB @ BETWEEN @ 1'-8" O.C. (MAX) POST OUTSIDE CORNER TRIM OUTSIDE CORNER TRIM 4
INSIDE CORNER DETAIL (PATTERN #1) (PATTERN #1) POST @ BETWEEN @ 1'-8" O.C. (MAX) INSIDE CORNER TRIM POST INSIDE CORNER TRIM INSIDE CORNER TRIM (P-IC) 5
WINDOW & DOOR JAMB DETAIL FRAME DOOR STOP DOOR DOOR AND EDGE CAP (P-DEC) (PATTERN #1) @ 1'-8" O.C. (MAX.) ANGLE TRIM "J" CHANNEL WALK DOOR & WINDOW (P-DWT) FRAME ANGLE TRIM "J" CHANNEL (P-JC) DOOR "J" CHANNEL DOOR STOP ANGLE TRIM (P-A) 6
WINDOW & DOOR JAMB DETAIL DOOR STOP DOOR (PATTERN #1) @ BETWEEN @ 1'-8" O.C. (MAX) WALK DOOR & WINDOW TRIM DOOR STOP DOOR (PATTERN #1) @ BETWEEN @ 1'-8" O.C. (MAX) DOOR AND EDGE CAP 7
OVERHEAD DOOR JAMB DETAIL DOOR JAMB (PATTERN #1) @ BETWEEN @ 1'-8" O.C. (MAX) OVERHEAD DOOR FLASHING DOOR JAMB OVERHEAD DOOR FLASHING OVERHEAD DOOR FLASHING (P-JFA) DOOR JAMB FLASHING (P-JFB) 8
OVERHEAD DOOR HEADER DETAIL (RECOMMENDED) HEADER OVERHEAD DOOR FLASHING FIELD WORK AS REQ'D "J" CHANNEL (P-JC) HEADER ANGLE TRIM (P-A) OVERHEAD DOOR FLASHING (RECOMMENDED) FIELD WORK AS REQ'D OVERHEAD DOOR FLASHING (P-JFB) 9
EAVE DETAIL w/ TAPE SEALANT TOP & BOTTOM EAVE TRIM (SPECIFY DESIRED PITCH) EAVE TRIM (PATTERN #3) MAX RIB/MESA BUILDING LINE PURLIN OUTSIDE CLOSURE (RECOMMENDED) "J" CHANNEL FASTENER EAVE TRIM W/ TAPE SEALANT TOP AND BOTTOM SOFFIT TRIM MAX RIB/MESA FASTENER PURLIN OUTSIDE CLOSURE ANGLE TRIM 10
SOFFIT AND VENTED EAVE DETAIL MAX RIB w/ TAPE SEALANT TOP & BOTTOM EAVE TRIM @ 1'-0" O.C. FASCIA BOARD (PATTERN #3) OUTSIDE CLOSURE (RECOMMENDED) MAX-RIB SOFFIT TRIM MAX RIB/MESA w/ TAPE SEALANT TOP & BOTTOM EAVE TRIM @ 1'-0" O.C. "J" CHANNEL ANGLE VENTED AREA (OPTIONAL) 11
GABLE / RAKE START DETAIL @ 1'-0" O.C. ROLL TAPE SEALANT GABLE TRIM (PATTERN # 3) (PATTERN #1) OUTSIDE CLOSURE (RECOMMENDED) PURLIN RAFTER STITCH FASTENER GABLE TRIM PURLIN TAPE SEALANT RAFTER OUTSIDE CLOSURE (RECOMMENDED) GABLE TRIM (P-RF) 12
GABLE / RAKE END DETAIL FIELD CUT AS REQ'D TAPE SEALANT @1'-0" O.C. GABLE TRIM (PATTERN #1) RAFTER (PATTERN #3) (PATTERN #3) OUTSIDE CLOSURE (RECOMMENDED) GABLE TRIM PURLIN TAPE SEALANT FIELD CUT AS REQUIRED RAFTER OUTSIDE CLOSURE (RECOMMENDED) GABLE TRIM (P-RF) 13
SHINGLED RAKE DETAIL SHINGLES FELT SHINGLED RAKE DECKING FASCIA BOARD (1'-0" CENTERS) SHINGLES FELT SHINGLED RAKE DECKING (1'-0" CENTERS) FASCIA BOARD SHINGLED RAKE TRIM (P-SRT) 14
RIDGE DETAIL (PATTERN #3) RIDGE CAP RIDGE OUTSIDE CLOSURE w/ TAPE SEALANT TOP & BOTTOM ROOF LINE PURLIN RIDGE CAP OUTSIDE CLOSURE w/ TAPE SEALANT TOP & BOTTOM PURLIN RIDGE CAP 15
SLIDING DOOR DETAIL TRACK SUPPORT FLAT HEAD WOOD FASTENER DOOR COVER FLASHING DOOR COVER (NATIONAL B) FLASHING (P-DTCB) DOOR TRACK TRACK BOARD ON DOOR DOOR COVER FLASHING (NATIONAL A) (P-DTCA) DOOR COVER FLASHING TRACK SUPPORT FLAT HEAD WOOD FASTENER DOOR COVER FLASHING (CANNONBALL TOP MOUNT) DOOR TRACK TRACK BOARD ON DOOR DOOR COVER FLASHING (CANNONBALL) (P-DTC-CB) 16
SLIDING DOOR JAMB DETAIL @1'-8" O.C. POST DOOR JAMB TRIM @ ; BETWEEN S@ 1'-0" O.C. (MAX.) @1'-8" O.C. POST DOOR JAMB (P-SDJ) @ ; BETWEEN S@ 1'-0" O.C. (MAX.) DOOR JAMB TRIM CORNER SLIDING DOOR JAMB (P-CSD) 17
GABLE END / ZEE FLASHING DETAIL /TRANSLUCENT * 1/8" MIN. CLEARANCE BETWEEN AND ZEE FLASHING. ZEE FLASHING (PATTERN #3) OUTSIDE CLOSURE /TRANSLUCENT ZEE FLASHING OUTSIDE CLOSURE ZEE FLASHING (P-ZF) 18
HIGHSIDE TIE-IN DETAIL HIGHSIDE TIE-IN TRIM OUTSIDE CLOSURE W/ TAPE SEALANT TOP AND BOTTOM (PATTERN #3) HIGHSIDE TIE-IN TRIM OUTSIDE CLOSURE W/ TAPE SEALANT TOP AND BOTTOM HIGHSIDE TIE-IN TRIM (P-SWF) 19
RAKE TIE-IN RAKE TIE-IN TRIM @1'-0" O.C. TAPE SEALANT RAFTER (PATTERN #1) RAKE TIE-IN TRIM @ 1'-0" O.C. RAFTER TAPE SEALANT RAKE TIE-IN TRIM (P-EWF) 20
W/ TAPE SEALANT TOP AND BOTTOM GAMBREL UPPER (PATTERN #3) OUTSIDE CLOSURE W/ TAPE SEALANT TOP AND BOTTOM SPEC. GAMBREL UPPER W/ TAPE SEALANT TOP AND BOTTOM MAX-RIBMESA GAMBREL LOWER (* SPECIFY PITCH) SPEC. GAMBREL LOWER (PATTERN #3) OUTSIDE CLOSURE W/ TAPE SEALANT TOP AND BOTTOM (* SPECIFY PITCH) 21
VALLEY DETAIL VALLEY TRIM * (HIGH RIBS ONLY) ROLL TAPE SEALANT TOP & BOTTOM & 3/16 DOUBLE BEAD TAPE SEALANT BETWEEN CLOSURE RIBS PEEL AND STICK WEATHER PROOFING PANCAKE HEAD WOOD SCREW DECKING VALLEY TRIM DECKING PEEL AND STICK WEATHER PROOFING PANCAKE HEAD WOOD SCREW *NOTE: USE HIGH RIB OF CLOSURE ONLY! PLACE CLOSURE SQUARE TO RUN WITH TAPE ON TOP AND BOTTOM. RUN 3/16" DOUBLE BEAD TAPE SEALANT BETWEEN HIGH RIBS FULL LENGTH OF VALLEY. VALLEY TRIM (SPECIFY ROOF PITCH) (P-VF) 22