LOT NUMBER: DTE PURHSED: / / Ottoman Gaming hair Model #W-502D DULT SSEMBLY REQUIRED If you have any questions regarding assembly or if parts are missing, DO NOT return this item to the store where it was purchased. Please call our toll-free customer service number and have your instructions and parts list ready to provide the model name, part name or factory number: 866-632-6632 Pacific Standard Time: 8:30 a.m. - 4:30 p.m., Monday - Friday Or visit our website www.levelupgear.com Or e-mail your request to: parts@whalenfurniture.com THIS INSTRUTION BOOKLET ONTINS IMPORTNT SFETY INFORMTION. PLESE RED ND KEEP FOR FUTURE REFERENE. Whalen Furniture Mfg., Inc. Page 1 Factory # 16406
Parts and Hardware List Please read completely through the instructions and verify that all parts listed are present before beginning assembly. - Right Side Panel (1) B- Left Side Panel (1) - Backrest (1) D- Seat ushion (1) E- Back Panel (1) F- Front Panel (1) G- Bottom Panel (1) (1)- Floor Leveler (4) (2)- Metal Bracket (8) (3)- Side Panel Fastener (2) (4) 5/8 llen Bolt (16+1 extra) (5) M5 llen Wrench (1) Tools required: llen Wrench (provided). Whalen Furniture Mfg., Inc. Page 2 Factory # 16406
ssembly Instructions NOTE: Please do not fully tighten all bolts until you finish assembling all parts. Once assembled, go back and fully tighten all bolts. This will make it easier during assembly of unit. 1. Unpack the unit and confirm that you have all the hardware and required parts listed. 2. Tightly screw the Floor Levelers (1) into the threaded inserts underneath the Left and Right Side Panels ( and B) by rotating clockwise. 1 1 B 3. Locate the Right Side Panel () and place it on a scratch free surface with cleats facing up, as shown. 4. lign and attach 4 Metal Brackets (2) to the Right Side Panel () using the 5/8 llen Bolts (4) provided. Make sure the right angle side of Metal Bracket (2) points outward. 5. Repeat the same procedure with Left Side Panel (B). 4 2 Whalen Furniture Mfg., Inc. Page 3 Factory # 16406
ssembly Instructions 6. lign and attach the Back Panel (E) to the Right Side Panel () ensuring the cleat will face the floor, using two 5/8 llen Bolts (4) though the Metal Brackets (2) and into the threaded inserts on the Back Panel (E), as shown below. 7. Repeat last step to fasten the Front Panel (F) at the other end. F E 4 4 8. lign and attach Left Side Panel (B) to the last assembly, using four 5/8 llen Bolts (4) through the installed Metal Brackets (2) into place. DO NOT fully tighten the bolts. E 4 B F Whalen Furniture Mfg., Inc. Page 4 Factory # 16406
ssembly Instructions 9. Place the Seat ushion (D) onto the upper cleats of Side Panels ( and B) with the thick edge facing forward. B D 10. Snugly fit the tilt pivots pre-attached on the Backrest () between the slots of both Side Panels ( and B). You may require applying pressure to the Side Panels to make it fit properly. /B B Whalen Furniture Mfg., Inc. Page 5 Factory # 16406
ssembly Instructions 11. Rotate and position the Backrest () onto the Seat ushion (D). Secure the Backrest () to both Side Panels ( and B) by using two Fasteners (3) provided. Make sure the flat washer is located between the bolt and metal spacer. 3 D 12. Pivot the Backrest () to the upright position and remove the Seat ushion (D). Go back and securely tighten all the bolts with the llen Wrench (5) provided. 13. Now, tilt and rest the Bottom Panel (G) onto the bottom cleats of assembled frame for storage. G D F F Whalen Furniture Mfg., Inc. Page 6 Factory # 16406
ssembly Instructions 14. Replace the Seat ushion (D) to finish the assembly. 15. If necessary, adjust the Floor Levelers (1) on the bottom of Side Panels ( and B) to level the unit. D are and Maintenance Use a soft, clean cloth that will not scratch the surface when dusting. Use of furniture polish is not necessary. Should you choose to use polish, test in an inconspicuous area first. Using solvents of any kind on your furniture may damage the finish. Never use water to clean your furniture as it may cause damage to the finish. Stains or marks from crayons or ink markers will be difficult to remove. In the event that your furniture is stained or otherwise damaged during use, we recommend that you call a professional to repair your furniture. heck bolts/screws periodically and tighten them if necessary. We hope you enjoy your purchase for many years and thank you for choosing Whalen Furniture! QULITY GURNTEE We are confident that you will be delighted with your Whalen Furniture purchase. Should this product be defective in workmanship or materials, or fail under normal use, we will repair or replace it for up to one (1) year from date of purchase. Every Whalen Furniture product is designed to meet your highest expectations. We guarantee that you will immediately see the value of our fine furniture. This warranty gives you specific legal rights and you may also have other rights which vary from State to State. ustomer Service: 866-632-6632 8:30 a.m. - 4:30 p.m., PST, Monday to Friday www.levelupgear.com Whalen Furniture Mfg., Inc. Page 7 Factory # 16406
IF YOU NEED TO REQUEST NY PRTS PLESE USE THE LIST BELOW Ottoman Gaming hair (W-502D) *W-502D--RSP Right Side Panel *W-502D-G-BP Bottom Panel *W-502D-B-LSP Left Side Panel *W-502D-1-FL Floor Leveler *W-502D--B Backrest *W-502D-2-MB Metal Bracket *W-502D-D-S Seat ushion *W-502D-3-SPF Side Panel Fastener (2-1/2" L Bolt) *W-502D-E-BP Back Panel *W-502D-4-5/8B 5/8" llen Bolt *W-502D-F-FP Front Panel *W-502D-5-M5W M5 llen Wrench