Boring Milling. MAPAL competence Tools with ISO elements

Boring Milling MAPAL competence Tools with ISO elements

Perfect machining technology MAPAL stands for innovative machining solutions with the highest quality, precision and cost-effectiveness. Starting from fine bore machining, we offer our customers a comprehensive range of precision tools for machining cubic parts. In conjunction with tailored services we can design complete machining processes so that reliable, cost-effective manufacturing is guaranteed. ISO tools from MAPAL have achieved a leading role in the areas of boring, precision boring and milling. Building on its knowledge of fine machining, in recent years MAPAL has produced a wide range of cost-effective standard tools and a broad technological basis for customer-specific solutions. Our specialists tap major productivity potential for every machining task by means of a wide variety of design options and their deep process understanding. Dr. Jochen Kress

Reliable service worldwide Complete support from planning to the process Planning and organising the complete machining process Technical support during commissioning Reliable and cost-effective tool supply by means of tool management Worldwide availability The sound experience of MAPAL specialists is available to customers worldwide during the entire collaboration process up to and including process support. Depending on the customer's needs, individual custom tools are designed or the complete planning and process support taken over. However, support from MAPAL does not end with the start of production. Even during the production phase specialists from MAPAL assist the customer, optimise parameters or tool details, provide advice related to the process with their know-how and produce significant added value for the customer. With its complete range of services including tool management, MAPAL helps to keep production top notch: highly productive, costeffective and reliable. ISO tools and services from MAPAL are available worldwide. With production facilities, sales and service offices in all relevant markets of the world, short channels for delivery and support are guaranteed. The systematic know-how transfer between the subsidiaries ensures consistent quality collaboration at the highest technical level. Subsidiaries Representatives

Competent in the standard Broad standard programme of tools and indexable inserts Boring large diameters with short machining times High-performance milling cutters for a large number of machining tasks Precise, cost-effective indexable inserts The usage of high performance, cost-effective standard tools plays a significant role in process design. In this area MAPAL has produced and brought to market maturity a broad range of tools and indexable inserts in recent years. For boring large diameters with short machining times the tangential tools TSW and TFB have been further developed as a uniform and highly productive program for roughing and fine machining. In the milling area a high performance range of tools is available as standard for a large number of machining tasks. And finally there is a completely new, costeffective range of indexable inserts for ISO tools available from stock.

Leading process solutions Optimised processes with matched complete machining tools Reduced machining costs through ISO complete machining tools and hybrid tools Intelligent engineering guarantees process reliability and straightforward handling The latest manufacturing facilities for precision tools at the highest level During the planning of new machining processes as well as the optimisation of existing processes, the focus is on the assessment of the machining time and the Cost Per Part (CPP). By means of intelligent, multi-stage, multi-cutting edge ISO combination tools or complete machining tools, both the productive times and the non-productive times can be significantly reduced. Here the design of intelligent tool solutions is not limited to just the ISO area. To prepare a solution that is optimal for the customer, different machining systems are combined into socalled hybrid tools. ISO tools from MAPAL meet both the requirement for process reliability and the requirement for straightforward handling with intelligent and precise adapter solutions along with reliable, quick indexable insert mounting. The reliable principle of operation of MAPAL ISO tools is ensured by the latest design methods that make it possible to assess collisions or to determine tool restrictions even during the planning phase. Production in the latest manufacturing facilities guarantees maximum tool precision.

Demanding machining tasks require maximum productivity Components such as engine blocks, brakes, turbochargers or swivel bearings, and also many other cubic parts from the automotive and commercial vehicle industry, mechanical engineering and systems engineering or the energy and aerospace industry require accuracies in the machining process in the range from IT 9 to IT 7. It must be possible to optimally machine mostly cored parts with high stock removal, large bore diameters and varying structures while taking into account the tolerance parameters, the stability of the part and the performance of the machine. ISO tool solutions are predestined for these requirements and cover the complete range of workpiece materials, in particular cast parts. Due to the large selection of cutting geometries, insert shapes and cutting materials, they are versatile in use and offer significant rationalisation potential during boring or milling in pre-machining or fine machining. The replaceable indexable inserts make the reconditioning of tools particularly straightforward and reduce the tool costs and as a consequence the Cost Per Part (CPP). Requirements on innovative tool solutions For all materials For numerous applications Increase productivity and quality Reduce productive and non-productive times Reduce costs Easy handling Universal use Conservation of resources P M K N S The numerous possibilities continue with the list of workpiece materials. The applications range from machining castings and steel, through the machining of demanding, high-alloy materials such as titanium or inconel, to aluminium. Engine blocks 6

Tools with ISO elements Introduction Suspension Brakes Turbochargers Connecting rods Compressors Large engines Gearbox housing: mechanical engineering / system engineering Wind power 7

ISO tools from MAPAL the leading technology The high customer requirements are met by MAPAL from the design to the manufacture of the tools by means of extensive know-how and the latest technology. For this reason ISO tools from MAPAL are leading in the custom sector and standard sector. The combination of continuous product innovations and a wealth of experience from more than 15 years gives the tools their high performance with the objective of achieving higher part qualities, better tool lives and increased productivity. Precision, performance and innovative technology Process solutions Perfectly yours MAPAL precision in design and production Advantages of MAPAL ISO tools Reduction of the manufacturing costs per unit due to short machining times Combination tools for the reduction of the number of tools required High process reliability Maximum cost-effectiveness due to tangential technology Technology available worldwide To reduce productive and non-productive times simultaneously, MAPAL offers particularly high performance complete machining tools. Reduced cycle times, lower energy consumption and the related higher cost-effectiveness are the result. These effects are achieved by innovative processes such as helix milling or interpolation turning. Among the success stories of processes optimised by MAPAL specialists there are some applications where it was possible to save up to 60 % of the machining time. The latest 3D design and computer-aided studies make it possible to develop and design complex tangential tools. The data on the insert seats and chip spaces exactly defined in this manner and other machining tasks are sent via a CAM interface to the controller for high-accuracy, highperformance 5-axis machining centres. In this way MAPAL ISO tools are produced with monitoring and control by experienced staff. Highly accurate manufacturing tolerances are required and met. This aspect guarantees a real multi-cutting edge capability and the high performance of the tools. 8

Tools with ISO elements Introduction Maximum cost-effectiveness Always the right cutting edge Finishing machining possible due to tangential technology Crucial for the high performance of the MAPAL ISO tools is tangential technology. Compared to the usage of radially mounted indexable inserts, this technology permits the usage of several cutting edges with the same power consumption. So that, higher machining values and a higher machining volume are possible. Tangential tools also feature very smooth running. As a result excellent tool lives and very good part qualities are achieved. In the area of ISO boring and milling tools MAPAL offers a wide selection of geometries and cutting materials. Due to the comprehensive programme it is ensured that the right cutting edge can be used for every application. Along with the different shapes and sizes, this programme also includes cutting materials such as carbide, ceramic and PCD or PcBN-tipped inserts. This variety has a positive effect on cost-effectiveness and the efficiency of the usage of resources. Depending upon the application, up to eightcutting edges on the indexable inserts ensure the cutting material is utilised optimally. The indexable inserts are straightforward and reliable to change. The combination of highly accurate inserts and a precise insert seat in the tool body guarantees a consistent machining result after every insert change. To be able to achieve very high accuracies, particularly during bore machining, MAPAL uses a special, simple adjusting system that is accurate to the μ. 9

Significant advantages due to innovative tool solutions The perfect interaction TSW/TFB tools The MAPAL tangential roughing tools TSW and tangential fine boring tools TFB are designed as a complete programme from pre-machining to fine machining, especially for large bore diameters. The TSW roughing tools feature an indexable insert with six usable cutting edges. The special effect of the arc shaped land is even more apparent on indexable inserts for the TFB fine boring tools. Using these tools, machining results of reaming quality are achieved with significantly shorter machining times than one or two-cutting edge boring tools. For example: During the pre-machining of cylinder bores in engine blocks made of GG25 using a tangential roughing tool, it was possible to reduce the machining time from 16 seconds to eight seconds. Prior to the conversion it was necessary to divide the high stock removal over two boring tools. 50 % less machining time more from page 18 Win in every process complex combination tools For example: It was possible to reduce the total machining time for a gearbox housing made of grey cast iron from 46 minutes to 18 minutes. This saving was possible due to the usage of various MAPAL ISO tools for the combination machining and for the interpolation turning. 60 % less machining time The optimisation of each individual machining step in a machining process results in the most cost-effective result in the end. During the machining of large numbers of parts, around two thirds of the non-productive time and a third of the productive time is avoided. Accordingly, there is significant potential for reducing the process time by means of reduced tool changing and movement times. MAPAL has the know-how and the facilities to exploit this potential by means of complex combination tools and modern machining technologies. The combination of different machining systems into so-called hybrid tools also opens up numerous possibilities. more examples from page 127 10

Tools with ISO elements Introduction Eight cutting edges on the disc milling cutter LTHU indexable inserts High stability, a soft cut and a large number of cutting edges characterise the MAPAL tangential milling programme. The disc and shoulder milling cutters fitted with the 4+4-cutting edge indexable inserts of type LTHU are a highlight. These peripheral ground indexable inserts combined with the highly accurate MAPAL fixed insert seats in the tool achieve real multi-cutting edge capability during roughing and semi-finishing. On the milling cutters shown below all eight cutting edges can be used in the same machining direction and offer excellent cost-effectiveness. For example: During the milling of the disc slot and the pad seat on a car brake caliper, it was possible to significantly reduce the Cost Per Part (CPP) for the milling process using a disc milling cutter with eight-cutting edge LTHU indexable inserts. Costs per part reduced by 66 % more on the milling cutter range from page 64, more on indexable inserts from page 121 Machine extensively and quickly the MAPAL helix milling cutter For roughing different, in particular large diameters on a workpiece, circular milling is often used. However, a circular milling cutter often requires a large number of cycles until all the machining is complete. This means a low material removal rate and a long machining time. The alternative is the MAPAL helix milling cutter: it superimposes an axial feed movement on the circular movement. With the specially arranged tangential indexable inserts, the tool plunges into the workpiece at full cutting depth. Up to 50 % higher material removal rates secure significant efficiency advantages compared to conventional circular milling. For example: Compared to a porcupine milling cutter, by changing to the MAPAL helix milling cutter it was possible to increase the material removal rate during the machining of a bore with a diameter of 1,300 mm in a GG25 housing from 1,450 to 2,150 cm³/min. Material removal rate increased by 48 % more on helix milling from page 194 11

12

Tools with ISO elements Introduction Index Boring 15 Milling 35 Indexable inserts 67 Innovative 127 complete solutions Cartridges 137 Accessories and spare parts 155 Technical appendix 173 13

14

Tools with ISO elements Boring Boring Introduction Boring tools for pre-machining and fine machining Pre-machining places major challenges on machining manufacture. For this reason a costeffective pre-machining tool is important in the machining process. With a background of fine machining and many years of experience related to bore machining, MAPAL has obtained sound know-how that is manifested in the innovative and very productive boring tools with ISO elements. ISO combination tools tap new productivity potential on a daily basis also in conjunction with other product groups. The tangential roughing and fine boring tools were specially developed for pre-machining and fine machining large diameters; today these tools are available as standard. Programme overview boring 16 Tangential roughing tools TSW 18 Application notes TSW 19 Designation key and series TSW 20 Tangential fine boring tools TFB 26 Application notes TFB 27 Designation key and series TFB 28 Through bore Suitable for open bores. Not suitable for machining shoulders if a 90 angle is required. Blind bore Suitable for closed bores and machining shoulders taking into account the cutting edge length. Internal cooling Tools designed with internal coolant supply. 15

Tools with ISO elements Boring Programme overview Boring tools with ISO elements Programme overview 1 2 Standard tools 1 TFB tangential fine boring tool 2 TSW tangential roughing tool The MAPAL tangential roughing tools TSW and tangential fine boring tools TFB are designed as a complete range from the pre-machining to fine machining especially of large bore diameters. 3 Hybrid tools MAPAL hybrid tools combine different machining systems for maximum productivity. Example: combination tool with solid carbide drill and ISO countersink step. 4 Multi-step capability and tangential technology The multi-stage design reduces the tools needed and shortens the machining time. The tangential technology ensures particularly quiet running. In combination with guide pads, the tools achieve very high positioning accuracy. 5 Modular construction of ISO combination tools The modular design of ISO combination tools offers many advantages. For example, entire part families can be machined with fewer tools as only part of the tool needs to be changed. By using connections, for instance a highly accurate HSK-C connection, particularly complex tools can be constructed. Even more machining steps are combined into one tool and the productivity increased even further. 7 Fixed insert seat and cartridge High accuracy manufacturing tolerances on insert seats and indexable inserts guarantee the real multi-cutting edge capability of the ISO tools with fixed insert seats. Cartridges with standard dimensions or in a compact design further increase the flexibility of MAPAL ISO tools. 8 Boring tools with radial technology Depending on the requirements of the part and machining situation, ISO boring tools are also designed with radial indexable inserts. 2 1 3 6 External machining tools ISO tools for external machining are individually adapted to the machining task. Whether turning diameters, chamfering or producing special external contours, MAPAL ISO tools are the right solution. The usage of tangential indexable inserts also increases the performance of the tools here. 8 7 16

Tools with ISO elements Boring Programme overview Exact adjustment Boring Introduction For the cases in which high accuracy indexable inserts and precision milled insert seats are insufficient for the required accuracy, MAPAL uses an adjustment system specially developed for ISO inserts. Here the insert sits on an adjusting wedge with a large contact area. This feature is completely embedded in the tool body and as a result offers the indexable insert a stable seat. The adjusting wedge has an angled surface and can be moved using a lefthand - right-hand threaded adjusting screw. This design produces an indirect, very accurate and easy to use setting feature. As a consequence MAPAL ISO tools achieve accuracies not normally achieved using ISO tools. 4 5 Best machining results due to arc shaped land Due to the normal clearance angle on ISO indexable inserts there is only limited support for the tool during bore machining. Tools then tend to vibration; this vibration effects the surface finish and tool life expectancy. To counteract this problem, MAPAL developed the arc shaped land. This special geometry is a support surface on the cutting edge that supports the tool in the bore and is comparable to an arc land chamfer on fixed reamers. 6 17

Tools with ISO elements Boring Tangential roughing tools TSW Tangential roughing tools TSW The MAPAL tangential roughing tools set new standards in relation to stability and performance, particularly in the case of higher stock removal. An innovative, six-cutting edge indexable insert with special support chamfer prevents chatter and vibration. Perfect multi-cutting edge capability with increased stability is ensured by the tangential installation of the indexable inserts in precision insert seats on the front face. Tangential roughing tools Series TSW 101/111 and TSW 201/211 The ground clamping geometry combined with the tangential installation position on the face of the tool body results in a highly positive rake angle and therefore a soft cut and very quiet tool cutting behaviour. This property is further supported by a special support surface on the cutting edges, an arc shaped land, which supports the tool in the bore like an arc land chamfer on reamers. Along with the excellent cutting behaviour of the tangential roughing tools, the necessary drive power required is also reduced, as the machining forces are comparatively low. As a result the tools can also be used on machines with lower torques. It is, however, much more important that, with the same drive power, it is possible to fit more cutting edges to the tools, so that the feeds are increased and machining times drastically reduced. The diameter range of the tools from the standard series is 37-280 mm, larger diameters are also possible as a custom solution. Two insert sizes available in different substrates cover the entire diameter range. The TSW are available in a monoblock design and as a modular system for larger diameters. The TSW tools are also designed with two different contact angles on the insert seats. The contact angle is 0 on the TSW 101/201 tools for blind bores and 10 on the TSW 111/211 tools for through bores. Features Six-cutting edge tangential indexable insert Soft cutting behaviour Reduced drive power Tool life increased by up to 30 % High cutting depths Six to eight times faster than boring tools 18 The indexable insert has six cutting edges (marked in red) that are used by rotating and turning.

Tools with ISO elements Boring Tangential roughing tools TSW Application notes TSW monoblock ø 37-120 mm TSW modular design ø 60-280 mm Boring TSW / TFB Tool holders Tangential roughing head Length General figures for determining the maximum tool length 350 HSK 100 300 SK 50 / HSK 80 250 SK 40 / HSK 63 200 150 In case of unfavourable diameter-length ratios a pilot bore is recommended. lmax 100 50 0 40 60 80 100 120 140 160 180 200 220 240 260 280 Diameter Ordering example TSW 111 Pre-machining of a through bore in GGG40 The following are required: Nominal diameter 88.5 mm Depth of the bore 138.0 mm Material GGG40 Machine spindle HSK-A100 Number of cutting edges (pay attention to machine performance, see page 176) Z = 4 Tool model for the stated machining application: d=88,5 Z=4 TSW111-ø 088.50-Z4-200.0-A100 (L 2 =55) 5 L 1 =200 L B =138 2 Selected indexable inserts see page 99 WTHQ090608H03L10B041-HP455 19

Tools with ISO elements Boring Designation key Designation key for tangential roughing tools TSW Tools: TSW monoblock / TSW roughing heads l h d 1 d 1 TSW 101 and 111 TSW 201 and 211 T S W 1 0 1 - Ø 1 0 0. 0 0 - Z 4 Tool type Tool diameter d 1 and number of teeth TSW 101 + 111 TSW 201 + 211 TSW 101 + 111 TSW 201 + 211 Monoblock design TSW 101 = 0 contact angle for blind bores and bores with shoulders TSW 111 = 10 contact angle for through bores Modular design TSW 201 = 0 contact angle for blind bores and bores with shoulders TSW 211 = 10 contact angle for through bores Diameter d 1 No. of teeth Diameter d 1 No. of teeth 37,00-40,40 Z = 2 59,50-74,40 Z = 3 40,50-59,40 Z = 3 74,50-89,40 Z = 4 59,50-74,40 Z = 3 89,50-104,40 Z = 4 74,50-104,40 Z = 4 104,50-119,40 Z = 5 104,50-120,00 Z = 5 119,50-174,40 Z = 5 174,50-280,00 Z = 5 Tool holders: TSW 201 and 211 l h M C A - H S K - A 1 0 0-6 0-1 8 0-9 - 0 - W Type Shank connection Clamping diameter Projection length l h Internal cooling Alignment MCA Arbor HSK-A Custom Hollow shank taper Diameter Nominal length 9 (not Form A of arbor of the arbor specified) 0 HSK-C Hollow shank taper Form C Dimensions in mm. SK Taper shank in acc. with ISO AD/B Without alignment W Length adjustment Without length adjustment 20

Tools with ISO elements Boring Designation key - 1 0 0. 5 - A D B 5 0 TSW 101 + 111 TSW 201 + 211 l k = 40,0 l h l h l k l k d 1 d 1 d 1 d 1 d 1 d 1 Boring TSW / TFB Tool length l 1 = Can be configured as per lengthdiameter diagram Shank form Tool connection TSW monoblock TSW roughing heads TSW 101 + 111 Size Code HSK-C 63 C63 HSK-C 80 C80 HSK-C 100 C100 HSK-A 63 A63 HSK-A 80 A80 HSK-A 100 A100 SK-AD/B 40 ADB40 SK-AD/B 50 ADB50 TSW 201 + 211 Connection Connection ø-range Clamping diameter Code 59,50-74,40 ø 18 D18 74,50-89,40 ø 22 D22 Mounting bore 89,50-119,40 ø 27 D27 119,50-174,40 ø 40 D40 174,50-280,00 ø 60 D60 21

Tools with ISO elements Boring Tangential roughing tools TSW 101 tangential roughing tools Monoblock design Contact angle 0 For blind bores and bores with shoulders l 2 l 1 d 1 Machine connection HSK d 1 Number Nominal Tool lengths Indexable insert TORX screw of cutting size edges HSK l2 l1 min l1 max 37,00-40,40 2 40,50-59,40 3 59,50-74,40 3 74,50-104,40 4 104,50-120,00 5 HSK-A HSK-C HSK-A HSK-C HSK-A HSK-C 63 47 20 55 50 80 47 25 55 55 100 55 30 70 70 63 47 20 60 50 80 47 25 55 55 100 55 30 65 65 63 47 20 65 50 80 47 25 60 55 100 55 30 60 65 63 47 20 75 55 80 47 25 70 55 100 55 30 70 65 80 47 25 75 60 100 55 30 75 65 l 2 l 1 See diagram Page 19 See diagram Page 19 WTHQ 0705 L00BO26 WTHQ 0906 L00BO41 Page 98 Page 98 TX15-M4x11 10018468 TX20-M5x13 10105084 d 1 Machine connection ISO d 1 Number Nominal Tool lengths Indexable insert TORX screw of cutting size edges ISO l2 l1 min l1 max ISO-AD / ISO-B ISO-AD / ISO-B ISO-AD / ISO-B 37,00-40,40 2 40,50-59,40 3 59,50-74,40 3 74,50-104,40 4 104,50-120,00 5 Further dimensions and lengths on request. Dimensions in mm. 22 40 40 50 50 45 60 40 40 55 50 45 60 40 40 60 50 45 50 40 40 70 50 45 60 40 40 75 50 45 65 See diagram Page 19 See diagram Page 19 WTHQ 0705 L00BO26 WTHQ 0906 L00BO41 TX15-M4x11 10018468 TX20-M5x13 10105084 Please note: If the collar diameter at l 2 is smaller than d 1, it is also to be taken into account in the machining length. Page 98 Page 98

Tools with ISO elements Boring Tangential roughing tools TSW 111 tangential roughing tools Monoblock design Contact angle 10 For through bores l 2 l 1 Boring TSW / TFB d 1 10 Machine connection HSK d 1 Number Nominal Tool lengths Indexable insert TORX screw of cutting size edges HSK l2 l1 min l1 max 37,00-40,40 2 40,50-59,40 3 59,50-74,40 3 74,50-104,40 4 104,50-120,00 5 HSK-A HSK-C HSK-A HSK-C HSK-A HSK-C 63 47 20 55 50 80 47 25 55 55 100 55 30 70 70 63 47 20 60 50 80 47 25 55 55 100 55 30 65 65 63 47 20 65 50 80 47 25 60 55 100 55 30 60 65 63 47 20 75 55 80 47 25 70 55 100 55 30 70 65 80 47 25 75 60 100 55 30 75 65 l 2 See diagram Page 19 See diagram Page 19 l 1 WTHQ 0705 L10BO26 WTHQ 0906 L10BO41 Page 99 Page 99 TX15-M4x11 10018468 TX20-M5x13 10105084 d 1 Machine connection ISO 10 d 1 Number Nominal Tool lengths Indexable insert TORX screw of cutting size edges ISO l2 l1 min l1 max ISO-AD / ISO-B ISO-AD / ISO-B ISO-AD / ISO-B 37,00-40,40 2 40,50-59,40 3 59,50-74,40 3 74,50-104,40 4 104,50-120,00 5 Further dimensions and lengths on request. Dimensions in mm. 40 40 50 50 45 60 40 40 55 50 45 60 40 40 60 50 45 50 40 40 70 50 45 60 40 40 75 50 45 65 See diagram Page 19 See diagram Page 19 WTHQ 0705 L10BO26 WTHQ 0906 L10BO41 TX15-M4x11 10018468 TX20-M5x13 10105084 Please note: If the collar diameter at l 2 is smaller than d 1, it is also to be taken into account in the machining length. Page 99 Page 99 23

Tools with ISO elements Boring Tangential roughing heads TSW 201 tangential roughing heads Modular design Contact angle 0 For blind bores and bores with shoulders l k d 2 d 3 d 1 d 1 Number of cutting d 3 l k d 2 edges Indexable insert TORX screw 59,50-74,40 3 18 39 74,50-89,40 4 22 50 89,50-104,40 4 27 40 60 104,50-119,40 5 27 60 119,50-174,40 5 40 89 174,50-280,00 5 60 40 140 TSW 211 tangential roughing heads Modular design Contact angle 10 For through bores d 1 Number of cutting d 3 l k d 2 edges 59,50-74,40 3 18 39 74,50-89,40 4 22 50 89,50-104,40 4 27 40 60 104,50-119,40 5 27 60 119,50-174,40 5 40 89 174,50-280,00 5 60 40 140 d 2 d 3 l k 10 d 1 WTHQ 0906 L00B041 WTHQ 0906 L00B081 Indexable insert WTHQ 0906 L10B041 WTHQ 0906 L10B081 Page 99 Page 99 Page 99 Page 99 10105084 10105084 TORX screw 10105084 10105084 Further dimensions and lengths on request. Dimensions in mm. 24

Tools with ISO elements Boring Tool holders for tangential roughing heads TH-TSW 201 and 211 tool holders for tangential roughing heads l h l 2 d 3 d 2 Boring TSW / TFB Machine connection HSK (DIN 69893-1) For tool ø d 3 d 2 Nominal size Tool holder lengths HSK l2 lh min lh max HSK-A HSK-C HSK-A HSK-C HSK-A HSK-C 63 47 20 70 60 200 160 59,50-74,40 18 39 80 47 25 70 60 250 210 100 55 30 70 60 300 260 63 47 20 65 50 200 160 74,50-89,40 22 50 80 47 25 70 55 250 210 100 55 30 70 55 300 260 89,50-119,40 27 60 80 47 25 70 55 250 210 100 55 30 70 55 300 260 119,50-174,40 40 89 80 47 25 85 70 250 210 100 55 30 85 70 250 210 174,50-280,00 60 140 100 55 30 95 80 250 210 l 2 l h d 3 d 2 Machine connection ISO (DIN 69871 Form AD / B) For tool ø d 3 d 2 59,50-74,40 18 39 74,50-89,40 22 50 89,50-119,40 27 60 119,50-174,40 40 89 174,50-280,00 60 140 Further dimensions and lengths on request. Dimensions in mm. Nominal size ISO Tool holder lengths l 2 l h min l h max ISO-AD / ISO-B ISO-AD / ISO-B ISO-AD / ISO-B 40 40 50 160 50 45 50 210 40 40 50 160 50 45 50 210 40 40 50 45 55 210 40 40 50 45 65 210 40 40 50 45 85 210 25

Tools with ISO elements Boring Tangential fine boring tools TFB Tangential fine boring tools TFB Tangential technology now also for fine machining. Newly developed reaming cutting edges are mounted in precision insert seats and set sensitively and highly accurately to a defined amount above the reference setting pads using the MAPAL wedge adjustment. Up to IT 7 The tool is guided in the bore by the special arc shaped land. The MAPAL TFB series impresses due to easy, precise handling, quiet running at high feeds and the best machining results. Tangential fine boring tools Series TFB 101/111 The tangential fine boring tools are far superior to the previous conventional tool systems for the fine machining of large diameters. Compared to one or two-cutting edge boring tools the TFB tools are six to eight times faster with machining results in reaming quality. During fine machining the effect of the arc shaped land is even more significant than on the roughing tools it guides the tool in the bore and at the same time smoothes the surface. The TFB tools are equipped with six to eight indexable inserts that are embedded in the tool body unevenly in relation to each other. The reaming cutting edges are mounted in precision insert seats; a MAPAL wedge adjustment feature for exact and very sensitive adjustment is fitted for each cutting edge. Precision ground reference pads are used as a setting aid. The setting of the tools is enormously simplified, as the cutting edge only needs to be set to a specific amount beyond the pad diameter, a task that is very easy using commonly available measuring equipment and the sensitive adjustment accurate to the μm (see setting instructions on page 180). The TFB tangential fine boring tools comprise of three assemblies. The machine adapter and the intermediate adapter are connected via a MAPAL Module connection with radial and axial alignment, as a result the radial run-out error on the spindle can be compensated. The tangential fine boring head is connected to the intermediate adapter via an HSK connection. The standard diameter range is from ø 60 to 280 mm. The TFB tools are available in two different series. TFB 101 for blind bores and TFB 111 for through bores. Features MAPAL arc shaped land guides the tool and smoothes the bore Highly positive rake angle for soft cut High precision insert seats Bores in reaming quality Six to eight times faster than boring tools Straightforward, sensitive adjustment 26

Tools with ISO elements Boring Tangential fine boring tools TFB Application notes TFB modular design ø 60-280 mm Machine adapter Intermediate adapter Tangential fine boring head Standard lead geometries 1 30 For improved MG surface finish Boring TSW / TFB 0,55 MC 0,4 MA 45 75 Without any specific requirement (standard) For a specific requirement on the positioning accuracy General figures for determining the maximum tool length Length 350 300 250 200 150 100 50 HSK 100 SK 50 / HSK 80 SK 40 / HSK 63 In case of unfavourable diameter-length ratios a pilot bore is recommended. lmax1 lmax2 0 60 80 100 120 140 160 180 200 220 240 260 280 Diameter Ordering example TFB 111 Fine machining of a through bore in GGG40 4 L B =138 2 The following are required: Nominal diameter 89,0 mm Tolerance ( < IT7) H7 (+0.035/0) Depth of the bore 138.0 mm Material GGG40 Machine spindle HSK-A100 Number of cutting edges (pay attention to machine performance) Z = 6 Tool for the stated machining application: d 1 =89 H7 OS-AD-HSK-A100-MOD100-065-11 KS-VL-MOD100-HSK-C63-100-21 TFB111-ø089.00-Z6-065.0-C63 L Ma =65 L Za =100 L k =65 L 1 =230 Selected for indexable inserts see page 96 FTHW0905MCD01L00B030-CP131 27

Tools with ISO elements Boring Designation key Designation key for tangential fine boring tools TFB Tool: TFB fine boring heads l k d 1 d 1 TFB 101 and 111 T F B 1 0 1 - Ø 1 0 0. 0 0 - Z 8 Tool type Tool diameter d 1 and number of teeth TFB 101 + 111 TFB 101 + 111 Modular design TFB 101 = Blind bores and bores with shoulders TFB 111 = Through bores Diameter d 1 No. of teeth 60,00-74,99 Z = 6 75,00-89,99 Z = 6 90,00-109,99 Z = 8 110,00-119,99 Z = 8 120,00-159,99 Z = 8 160,00-179,99 Z = 8 180,00-280,00 Z = 8 Machine adapter: TFB 101 and 111 l MA l ZA O S - A D - H S K - A 1 0 0 - M O D 1 0 0-0 6 5-1 1 Type Adaptation Shank Form and size Adaptation Form and size Projection length L MA Alignment Internal cooling OS Without clamping unit Dimensions in mm. AD Adapters HSK-A HSK-C SK Hollow shank taper Form A Hollow shank taper Form C Taper shank in acc. with ISO AD/B MOD Module connection Nominal length of the machine adapter 0 Without alignment 1 2 Radial alignment Radial and angular alignment 1 Internal 28

Tools with ISO elements Boring Designation key Boring TSW / TFB - 0 6 5. 0 - C 1 0 0 Tool length Shank form Tool diameter Tool length Connection Size Code 60,00-74,99 65,0 75,00-89,99 65,0 90,00-109,99 65,0 110,00-119,99 75,0 120,00-159,99 75,0 160,00-179,99 95,0 180,00-280,00 95,0 HSK-C 50 C50 HSK-C 63 C63 HSK-C 80 C80 HSK-C 100 C100 Intermediate adapter: TFB 101 and 111 l ZA K S - V L - M O D 1 0 0 - H S K - C 6 3-1 0 0-2 1 Clamping unit Adaptation Shank Form and size Adaptation Form and size Projection length l ZA Alignment Internal cooling KS KS clamping cartridge VL Flange adapter MOD Module connection HSK-C Hollow Nominal length shank taper of the adapter Form C 0 1 Without alignment Radial alignment 1 Internal 2 Radial and angular alignment 29

Tools with ISO elements Boring Tangential fine boring heads TFB 101 tangential fine boring heads Modular design l k d 1 d 1 Number of cutting edges Number of setting pads Nominal size HSK l k Indexable insert TORX PLUS screw 60,00-74,99 6 2 HSK-C50 65 75,00-89,99 6 2 HSK-C63 65 90,00-109,99 8 4 HSK-C63 65 FTHW 0905 BO30 Page 96 TX-M3,5x11 10105079 110,00-119,99 8 4 HSK-C80 75 120,00-159,99 8 4 HSK-C80 75 160,00-179,99 8 4 HSK-C100 95 FTHW 0905 BO60 Page 96 TX-M3,5x11 10105079 180,00-280,00 8 4 HSK-C100 95 FTHW 0905 BO90 Page 96 TX-M3,5x11 10105079 Further dimensions and lengths on request. Dimensions in mm. 30

Tools with ISO elements Boring Tangential fine boring heads TFB 111 tangential fine boring heads Modular design l k d 1 Boring TSW / TFB d 1 Number of cutting edges Number of setting pads Nominal size HSK l k Indexable insert TORX PLUS screw 60,00-74,99 6 2 HSK-C50 65 75,00-89,99 6 2 HSK-C63 65 90,00-109,99 8 4 HSK-C63 65 FTHW 0905 BO30 Page 96 TX-M3,5x11 10105079 110,00-119,99 8 4 HSK-C80 75 120,00-159,99 8 4 HSK-C80 75 160,00-179,99 8 4 HSK-C100 95 FTHW 0905 BO60 Page 96 TX-M3,5x11 10105079 180,00-280,00 8 4 HSK-C100 95 FTHW 0905 BO90 Page 96 TX-M3,5x11 10105079 Further dimensions and lengths on request. Dimensions in mm. 31

Tools with ISO elements Boring Intermediate adapters Intermediate adapter D d 1 l 2 l ZA With radial and angular alignment For tool ø Module diameter Nominal size HSK Dimensions Weight Specification D HSK d 1 l ZA l 2 kg 60,00-74,99 80 50 75,00-109,99 100 63 110,00-159,99 117 80 160,00-280,00 140 100 55 35 18 0,9 KS-VL-MOD080-HSK-C050-035-21 30320018 55 100 83 1,9 KS-VL-MOD080-HSK-C050-100-21 30327001 55 150 133 2,65 KS-VL-MOD080-HSK-C050-150-21 30327002 55 200 183 3,4 KS-VL-MOD080-HSK-C050-200-21 30327004 70 43 22 1,8 KS-VL-MOD100-HSK-C063-043-21 30320019 70 100 79 3,2 KS-VL-MOD100-HSK-C063-100-21 30327005 70 150 129 4,8 KS-VL-MOD100-HSK-C063-150-21 30327007 70 200 179 5,6 KS-VL-MOD100-HSK-C063-200-21 30327008 87 50 29 2,7 KS-VL-MOD117-HSK-C080-050-21 30320020 87 100 79 4,7 KS-VL-MOD117-HSK-C080-100-21 30327009 87 150 129 6,65 KS-VL-MOD117-HSK-C080-150-21 30327010 87 200 179 8,6 KS-VL-MOD117-HSK-C080-200-21 30327012 110 70 42 4,9 KS-VL-MOD140-HSK-C100-070-21 30320021 110 100 72 7,6 KS-VL-MOD140-HSK-C100-100-21 30327013 110 150 122 10,6 KS-VL-MOD140-HSK-C100-150-21 30327014 Supply includes: Standard KS clamping cartridge, thrust pad and threaded pin, stop ring and cylinder head screws (for fastening the KS flange adapter). Dimensions in mm. For spare parts for intermediate adapters see page 157. 32

Tools with ISO elements Boring Machine adapters Machine adapter G 1 G D Boring TSW / TFB l MA For tool ø Locating shank Module diameter Dimensions Weight Specification D l MA G G 1 kg 60,00-74,99 75,00-109,99 110,00-159,99 160,00-280,00 HSK-A SK BT CAT HSK-A SK BT CAT HSK-A SK BT CAT HSK-A SK BT CAT 63 60 M6 M8x1 1,4 OS-AD-HSK-A063-MOD080-060-11 30319389 80 60 M6 M8x1 2,1 OS-AD-HSK-A080-MOD080-060-11 30319394 100 55 M6 M8x1 3 OS-AD-HSK-A100-MOD080-055-11 30319400 AD/B 40 55 M6 M8x1 1,7 OS-AD-SK040-MOD080-055-13 10058661 AD/B 50 80 50 M6 M8x1 3,6 OS-AD-SK050-MOD080-050-13 10058671 40 65 M6 M8x1 2 OS-AD-BT040-MOD080-065-11 30320088 50 70 M6 M8x1 5,1 OS-AD-BT050-MOD080-070-11 30320097 40 55 M6 M8x1 1,7 OS-AD-CAT040-MOD080-055-11 30320128 50 50 M6 M8x1 3,6 OS-AD-CAT050-MOD080-050-11 30320137 63 65 M8 M10x1 2,1 OS-AD-HSK-A063-MOD100-065-11 30319390 80 65 M8 M10x1 2,6 OS-AD-HSK-A080-MOD100-065-11 30319395 100 65 M8 M10x1 3,7 OS-AD-HSK-A100-MOD100-065-11 30319401 AD/B 40 60 M8 M10x1 2,2 OS-AD-SK040-MOD100-060-13 10058662 AD/B 50 100 60 M8 M10x1 4,4 OS-AD-SK050-MOD100-060-13 10058672 40 70 M8 M10x1 2,6 OS-AD-BT040-MOD100-070-11 30320089 50 70 M8 M10x1 5,3 OS-AD-BT050-MOD100-070-11 30320098 40 60 M8 M10x1 2,2 OS-AD-CAT040-MOD100-060-11 30320129 50 60 M8 M10x1 4,4 OS-AD-CAT050-MOD100-060-11 30320138 63 65 M8 M10x1 2,5 OS-AD-HSK-A063-MOD117-065-11 30319391 80 65 M8 M10x1 3,1 OS-AD-HSK-A080-MOD117-065-11 30319396 100 65 M8 M10x1 4 OS-AD-HSK-A100-MOD117-065-11 30319402 AD/B 40 - - - - - - AD/B 50 117 60 M8 M10x1 4,5 OS-AD-SK050-MOD117-060-13 10058673 40 - - - - - - 50 80 M8 M10x1 6,3 OS-AD-BT050-MOD117-080-11 30320099 40 - - - - - - 50 60 M8 M10x1 4,5 OS-AD-CAT050-MOD117-060-11 30320139 63 - - - - - - 80 75 M10 M10x1 4,2 OS-AD-HSK-A080-MOD140-075-11 30319397 100 75 M10 M10x1 5,2 OS-AD-HSK-A100-MOD140-075-11 30319403 AD/B 40 - - - - - - AD/B 50 140 60 M10 M10x1 4,7 OS-AD-SK050-MOD140-060-13 10058675 40 - - - - - - 50 80 M8 M10x1 6,6 OS-AD-BT050-MOD140-080-11 30320100 40 - - - - - - 50 60 M8 M10x1 4,7 OS-AD-CAT050-MOD140-060-11 30320140 Supply includes: Complete with threaded pins for aligning the radial run-out, does not include coolant tube. Dimensions in mm. For spare parts for machine adapters see page 157. 33

34

Tools with ISO elements Milling Milling Introduction MAPAL PerformanceMill ISO milling cutters MAPALs experience in the area of high performance custom ISO tools has been implemented in a standard programme of radial and tangential tools for a very wide range of applications. The PerformanceMill milling cutters are designed with high accuracy insert seats and include, along with face and shoulder cutter heads, also shell end face and disc milling cutters as well as the particularly innovative helix milling cutters for end face and bore machining. Perfectly matched cutting edge geometries and high performance coatings are basic features of the milling cutter indexable inserts. Programme overview milling 36 Designation key 38 Face milling cutters 40 Shoulder milling cutters 43 Shell end face milling cutters 51 Helix milling cutters 56 Disc milling cutters 59 Custom milling cutters 65 Trimming / edge milling Shoulder milling Disc milling cutters Shoulder milling deep Face milling Shoulder milling Gang milling cutters Shoulder milling (face circumferential milling) Groove milling Plunge milling linear Helix milling Internal cooling Tools are designed with internal coolant supply. Shank form Shank form 35

Tools with ISO elements Milling Programme overview Programme overview milling Milling cutter type Face milling cutters IFM75-C2/C4 Shoulder milling cutters ICM90-C2/C4 Wide pitch Close pitch Number of cutting edges 2 or 4 2 or 4 Application Cutting depth a p max. (mm) Tool ø (mm) Indexable insert 7 7 63-160 63-160 CT_D... / CT_Q CT_D... / CT_Q P M K N S Roughing Medium machining Finishing Page 41-42 44 / 46 Milling cutter type ISM90-B2-Shank Shell end face milling cutters ISM90-B2 ISM90-C2/C4-HSK/ISO Number of cutting edges 2 2 2 or 4 Application Cutting depth a p max. (mm) Tool ø (mm) Indexable insert 37 / 55 37 / 59 75 25-40 40-100 63-100 BD_T.. BD_T.. CT_D... / CT_Q P M K N S Roughing Medium machining Finishing Page 36 52 53 54-55 highly suitable suitable in some situations not suitable

Tools with ISO elements Milling Programme overview Shoulder milling cutters ICM90-C2/C4-Finishing ICM90-S4 ICM90-B2-Shank ICM90-B2 Milling Introduction 2 or 4 4 2 2 3 7 / 13 8 / 14 14 63-160 40-100 16-40 50-200 CT_H... / CT_A SE_T BD_T.. BD_T.. 45 / 47 48 49 50 Helix milling cutters Disc milling cutters IHM90-C2/C4-HSK IHM90-C2/C4 IDM90-C2/C4 IDM88-L8 2 or 4 2 or 4 2 or 4 4 + 4 35 35 7 / 17 11 80-160 125-160 100-200 100-200 CT_D... / CT_Q CT_D... / CT_Q CT_D... / CT_Q LT_U 57 58 60-63 64 37

Tools with ISO elements Milling Designation key Designation key milling cutter programme I F M 7 5 0-1 2 5 - C A 3 2 - Milling cutter type Internal cooling Tool diameter Connection (Examples) IFM Face milling cutters 0 Without IC 125 Milling cutter ø = 125 mm HA32 Cylindrical shank HA ø = 32 mm 1 With IC HB32 Cylindrical shank HB ø = 32 mm ICM Shoulder milling cutters HE32 Cylindrical shank HE ø = 32 mm ISM Shell end face milling cutters CA16 CA22 Milling cutter arbor ø = 16 mm Milling cutter arbor ø = 22 mm IHM Helix milling cutters CA27 Milling cutter arbor ø = 27 mm IDM Disc milling cutters CA32 Milling cutter arbor ø = 32 mm CA40 Milling cutter arbor ø = 40 mm CA60 Milling cutter arbor ø = 60 mm Contact angle / insert installation position 45 45 75 75 90 90 A063 A080 A100 C063 C100 HSK-A63 HSK-A80 HSK-A100 HSK-C63 HSK-C100 T063 HSK-T63 S050 ISO50 S040 ISO40 38

Tools with ISO elements Milling Designation key Z 1 0 R - C T _ D 0 9 - M Milling Introduction Effective number of cutting edges (eff.) (Examples) Direction of rotation Indexable insert Z5 Z10 Z9+3 Eff. number of teeth = 5 Eff. number of teeth = 10 Eff. number of teeth = 12 of which 3 adjustable cutting edges R L R1 Right Left Right / milling cutter (left-side cutting) 2. digit "T" 2. digit "E, D" CT... Tangential LT... Tangential BD... Radial SE... Radial Z12+4 Eff. number of teeth = 16 of which 4 adjustable cutting edges R2 Right / milling cutter (right-side cutting) Optional Z6+6 Disc milling cutters Eff. number of teeth = 6 (both sides, 3-sided cutting) R3 Right / milling cutter (both sides, 3-sided cutting) Modified body material / Type M 39

Tools with ISO elements Milling Face milling cutters Face milling cutter IFM Face milling cutter 75 Tangential IFM75-C2 IFM75-C4 Properties - Internal coolant supply - Enlarged face connection - Fixed insert seats - Wide, middle and narrow pitch - 75 contact therefore lower radial forces Application notes - For roughing and semi-machining - Large chip spaces for high chip volume Two-cutting edge indexable insert CT_D09T3 Four-cutting edge indexable insert CT_Q0905 Preferred for aluminium also PCD-tipped. Preferred for castings and steel. For castings also PcBN-tipped. 40

Tools with ISO elements Milling Face milling cutters Face cutter head with tangential technology IFM75-C2 κ 75 l 1 a p κ d 2 d 3 d 4 d 1 Face milling cutters CT_D09T3 / wide pitch Dimensions a p max. Weight kg Max. spindle speed (min -1 ) Specification ø d 1 Z e ff ø d 2 l 1 ø d 3 ø d 4 63 4 22 50 48 28 7 0,6 10.000 IFM751-063-CA22-Z4R-CT_D09 30395560 80 5 27 50 60 38 7 0,9 8.000 IFM751-080-CA27-Z5R-CT_D09 30395567 100 6 32 50 78 44 7 1,9 6.400 IFM751-100-CA32-Z6R-CT_D09 30383562 125 7 40 63 89 56 7 2,6 5.100 IFM751-125-CA40-Z7R-CT_D09 30395590 160 8 40 63 89 56 7 4,4 4.000 IFM751-160-CA40-Z8R-CT_D09 30395616 200 12 60 63 140 7 7,8 3.200 IFM751-200-CA60-Z12R-CT_D09 30529463 CT_D09T3 / middle pitch 63 6 22 50 48 28 7 0,6 10.000 IFM751-063-CA22-Z6R-CT_D09 30395561 80 7 27 50 60 38 7 0,9 8.000 IFM751-080-CA27-Z7R-CT_D09 30395587 100 9 32 50 78 44 7 1,7 6.400 IFM751-100-CA32-Z9R-CT_D09 30383563 125 10 40 63 89 56 7 2,8 5.100 IFM751-125-CA40-Z10R-CT_D09 30395591 160 12 40 63 89 56 7 4,5 4.000 IFM751-160-CA40-Z12R-CT_D09 30395617 200 16 60 63 140 7 8,1 3.200 IFM751-200-CA60-Z16R-CT_D09 30529464 CT_D09T3 / narrow pitch 63 8 22 50 48 28 7 0,6 10.000 IFM751-063-CA22-Z8R-CT_D09 30527719 80 12 27 50 60 38 7 0,9 8.000 IFM751-080-CA27-Z12R-CT_D09 30527720 100 14 32 50 78 44 7 1,7 6.400 IFM751-100-CA32-Z14R-CT_D09 30527721 125 18 40 63 89 56 7 2,8 5.100 IFM751-125-CA40-Z18R-CT_D09 30527723 160 20 40 63 89 56 7 4,5 4.000 IFM751-160-CA40-Z20R-CT_D09 30527724 200 25 60 63 140 7 8,3 3.200 IFM751-200-CA60-Z25R-CT_D09 30527725 Accessories Spare parts* CT_D09T3 Indexable insert Page 116-117 CT_D09T3 Clamping screw for indexable insert TORX PLUS M3.5x9.4-TX10-IP 10007315 Clamping systems / adapters See section Accessories Page 162 CT_D09T3 TORX PLUS screwdriver with handle 10IPx80x191 30414763 Milling cutter clamping screws See section Accessories Page 158 * Supply includes. Dimensions in mm. 41

d 1 d 2 d 3 Tools with ISO elements Milling Face milling cutters Face cutter head with tangential technology IFM75-C4 κ 75 l 1 a p κ d 4 CT_Q0905 / wide pitch Dimensions a p max. Weight kg Max. spindle speed (min -1 ) Specification ø d 1 Z e ff ø d 2 l 1 ø d 3 ø d 4 63 4 22 50 48 28 7 0,6 8.000 IFM751-063-CA22-Z4R-CT_Q09 30395562 80 5 27 50 60 38 7 0,9 6.500 IFM751-080-CA27-Z5R-CT_Q09 30395588 100 6 32 50 78 44 7 1,6 5.300 IFM751-100-CA32-Z6R-CT_Q09 30382219 125 7 40 63 89 56 7 2,7 4.300 IFM751-125-CA40-Z7R-CT_Q09 30395592 160 8 40 63 89 56 7 4,4 3.300 IFM751-160-CA40-Z8R-CT_Q09 30395618 200 12 60 63 140 7 8 2.600 IFM751-200-CA60-Z12R-CT_Q09 30529465 CT_Q0905 / middle pitch 63 6 22 50 48 28 7 0,6 8.000 IFM751-063-CA22-Z6R-CT_Q09 30395564 80 7 27 50 60 38 7 0,9 6.500 IFM751-080-CA27-Z7R-CT_Q09 30395589 100 9 32 50 78 44 7 1,7 5.300 IFM751-100-CA32-Z9R-CT_Q09 30382221 125 10 40 63 89 56 7 2,9 4.300 IFM751-125-CA40-Z10R-CT_Q09 30395615 160 12 40 63 89 56 7 4,6 3.300 IFM751-160-CA40-Z12R-CT_Q09 30395619 200 16 60 63 140 7 8 2.600 IFM751-200-CA60-Z16R-CT_Q09 30529466 CT_Q0905 / narrow pitch 63 8 22 50 48 28 7 0,6 8.000 IFM751-063-CA22-Z8R-CT_Q09 30527726 80 12 27 50 60 38 7 0,9 6.500 IFM751-80-CA27-Z12R-CT_Q09 30527727 100 14 32 50 78 44 7 1,7 5.300 IFM751-100-CA32-Z14R-CT_Q09 30527729 125 18 40 63 89 56 7 2,9 4.300 IFM751-125-CA40-Z18R-CT_Q09 30527730 160 20 40 63 89 56 7 4,6 3.300 IFM751-160-CA40-Z20R-CT_Q09 30527731 200 25 60 63 140 7 8,3 2.600 IFM751-200-CA60-Z25R-CT_Q09 30527732 Accessories Spare parts* CT_Q0905 Indexable insert Page 119 CT_Q0905 Clamping screw for indexable insert TORX PLUS M3.5x11-TX10-IP 10105079 Clamping systems / adapters See section Accessories Page 162 CT_Q0905 TORX PLUS screwdriver with handle 10IPx80x191 30414763 Milling cutter clamping screws See section Accessories Page 158 * Supply includes. Dimensions in mm. 42

Tools with ISO elements Milling Shoulder milling cutters Shoulder milling cutter ICM Shoulder milling cutter 90 Tangential Radial ICM90-C2/C4 ICM90-C2/C4 Finishing ICM90-S4 ICM90-B2- Shank Shoulder milling cutters ICM90-B2 Properties - Internal coolant supply - Enlarged face connection - Fixed insert seats - Wide, middle and narrow pitch - Internal coolant supply - Enlarged face connection - Adjustable finishing indexable insert - Close pitch - Internal coolant supply - Fixed insert seats - Positive installation position of the indexable insert for short projection length - Internal coolant supply - Fixed insert seats Application notes - For roughing and semi-finish machining - 90 shoulder surfaces possible - For roughing and semi-finish machining - 90 shoulder surfaces possible Adjustable finishing indexable insert - For roughing and semi-finish machining - 90 shoulder surfaces possible Preferred for castings and steel. - For roughing and semi-finish machining - 90 shoulder surfaces possible - Ramping milling is possible to a limited extent (up ø 63) - Plunging possible Preferred for castings and steel. Initial value for adjustable finishing indexable inserts 0.02 mm 0.04 mm. Two-cutting edge indexable insert Four-cutting edge indexable insert CT_D09T3 CT_Q0905 Preferred for aluminium also PCD-tipped. Preferred for castings and steel. For castings also PcBN-tipped. 43

a p κ d 1 d 2 d 3 Tools with ISO elements Milling Shoulder milling cutters Shoulder cutter head with tangential technology ICM90-C2 κ 90 l 1 d 4 CT_D09T3 / wide pitch Dimensions a p max. Weight kg Max. spindle speed (min -1 ) Specification ø d 1 Z e ff ø d 2 l 1 ø d 3 ø d 4 63 4 22 50 48 28 7 0,5 10.000 ICM901-063-CA22-Z4R-CT_D09 30395508 80 5 27 50 60 38 7 1 8.000 ICM901-080-CA27-Z5R-CT_D09 30395510 100 6 32 50 78 44 7 1,4 6.400 ICM901-100-CA32-Z6R-CT_D09 30383567 125 7 40 63 89 56 7 2,6 5.100 ICM901-125-CA40-Z7R-CT_D09 30395512 160 8 40 63 89 56 7 4 4.000 ICM901-160-CA40-Z8R-CT_D09 30395515 200 12 60 63 140 7 7,5 3.200 ICM901-200-CA60-Z12R-CT_D09 30529468 CT_Q09T3 / middle pitch 63 6 22 50 28 48 7 0,5 10.000 ICM901-063-CA22-Z6R-CT_D09 30529473 80 7 27 50 38 60 7 1,0 8.000 ICM901-080-CA27-Z7R-CT_D09 30529474 100 9 32 50 44 78 7 1,4 6.400 ICM901-100-CA32-Z9R-CT_D09 30529476 125 10 40 63 56 89 7 2,6 5.100 ICM901-125-CA40-Z10R-CT_D09 30529477 160 12 40 63 56 89 7 4,0 4.000 ICM901-160-CA40-Z12R-CT_D09 30529478 200 16 60 63 140 7 7,9 3.200 ICM901-200-CA60-Z16R-CT_D09 30529470 CT_Q09T3 / narrow pitch 63 8 22 50 48 28 7 0,5 10.000 ICM901-063-CA22-Z8R-CT_D09 30527703 80 12 27 50 60 38 7 1,0 8.000 ICM901-080-CA27-Z12R-CT_D09 30527705 100 14 32 50 78 44 7 1,4 6.400 ICM901-100-CA32-Z14R-CT_D09 30527706 125 18 40 63 89 56 7 2,6 5.100 ICM901-125-CA40-Z18R-CT_D09 30527707 160 20 40 63 89 56 7 4,0 4.000 ICM901-160-CA40-Z20R-CT_D09 30527708 200 25 60 63 140 7 8,1 3.200 ICM901-200-CA60-Z25R-CT_D09 30527711 Accessories Spare parts* CT_D09T3... Indexable insert Page 116-117 CT_D09T3... Clamping screw for indexable insert TORX PLUS M3.5x9.4-TX10-IP 10007315 Clamping systems / adapters See section Accessories Page 162 CT_D09T3... TORX PLUS screwdriver with handle 10IPx80x191 30414763 Milling cutter clamping screws See section Accessories Page 158 * Supply includes. Dimensions in mm. 44

Tools with ISO elements Milling Shoulder milling cutters Shoulder cutter head with tangential technology ICM90-C2-Finishing κ 90 l 1 a p κ d 2 d 3 d 4 d 1 CT_D09T3 Dimensions a p max. Weight kg Max. spindle speed (min -1 ) Specification Shoulder milling cutters ø d 1 Z e ff ø d 2 l 1 ø d 3 ø d 4 63 6 (4+2) 22 50 48 28 0.4 / 3.0 0,5 10.000 ICM901-063-CA22-Z4+2R-CT_D09 30395518 80 8 (6+2) 27 50 60 38 0.4 / 3.0 0,9 8.000 ICM901-080-CA27-Z6+2R-CT_D09 30395520 100 10 (8+2) 32 50 78 44 0.4 / 3.0 1,6 6.400 ICM901-100-CA32-Z8+2R-CT_D09 30383564 125 12 (9+3) 40 63 89 56 0.4 / 3.0 2,7 5.100 ICM901-125-CA40-Z9+3R-CT_D09 30395523 160 16 (12+4) 40 63 89 56 0.4 / 3.0 4,0 4.000 ICM901-160-CA40-Z12+4R-CT_D09 30395525 200 20 (15+5) 60 63 140 0.4 / 3.0 8,3 3.200 ICM901-200-CA60-Z15+5R-CT_D09 30601109 Accessories Selection notes CT_D09T3... Indexable insert Page 116-117 CT_A09T3 Indexable insert Page 118 Clamping systems / adapters See section Accessories Page 162 a p max. 0.4 mm on assembly with CT_D09T3 and CT_A09T3 a p max. 3.0 mm on assembly entirely with CT_D09T3 Milling cutter clamping screws See section Accessories Page 158 Spare parts* CT_D09T3... CT_A09T3... Clamping screw for indexable insert TORX PLUS M3.5x9.4-TX10-IP 10007315 Assembly note: Assembly example ø 100, Z e ff 10(8+2) CT_D09T3... CT_A09T3... TORX PLUS screwdriver with handle 10IPx80x191 Adjusting wedge M4x0.5 Threaded spindle M4x0.5 LH/RHx9 with screw locking 30414763 K14884-348 K1751-74 On assembly with wide face indexable inserts (CT_A09T3), 8 pieces CT_D09T3 and 2 pieces CT_A09T3 are fitted. Here the wide face indexable inserts (CT_A09T3) are fitted in the insert seats with axial adjustment. On assembly without wide face indexable inserts, 10 pieces CT_D09T3 are fitted. For setting instructions see page 195. Hex wrench Wrench size (sw) 2 10004356 * Supply includes. Dimensions in mm. 45

Tools with ISO elements Milling Shoulder milling cutters Shoulder cutter head with tangential technology ICM90-C4 κ 90 l 1 a p κ d 2 d 3 d 4 d 1 CT_Q0905 / wide pitch Dimensions a p max. Weight kg Max. spindle speed (min -1 ) Specification ø d 1 Z e ff ø d 2 l 1 ø d 3 ø d 4 63 4 22 50 48 28 7 0,6 8.000 ICM901-063-CA22-Z4R-CT_Q09 30395509 80 5 27 50 60 38 7 0,8 6.500 ICM901-080-CA27-Z5R-CT_Q09 30395511 100 6 32 50 78 44 7 1,5 5.300 ICM901-100-CA32-Z6R-CT_Q09 30382224 125 7 40 63 89 56 7 2,7 4.300 ICM901-125-CA40-Z7R-CT_Q09 30395513 160 8 40 63 89 56 7 4,1 3.300 ICM901-160-CA40-Z8R-CT_Q09 30395516 200 12 60 63 140 7 7,6 2.600 ICM901-200-CA60-Z12R-CT_Q09 30529471 CT_Q0905 / middle pitch 63 6 22 50 28 48 7 0,6 8.000 ICM901-063-CA22-Z6R-CT_Q09 30529479 80 7 27 50 38 60 7 0,8 6.500 ICM901-080-CA27-Z7R-CT_Q09 30529480 100 9 32 50 44 78 7 1,5 5.300 ICM901-100-CA32-Z9R-CT_Q09 30529481 125 10 40 63 56 89 7 2,7 4.300 ICM901-125-CA40-Z10R-CT_Q09 30529482 160 12 40 63 56 89 7 4,1 3.300 ICM901-160-CA40-Z12R-CT_Q09 30529483 200 16 60 63 140 7 7,9 2.600 ICM901-200-CA60-Z16R-CT_Q09 30529472 CT_Q0905 / narrow pitch 63 8 22 50 48 28 7 0,6 8.000 ICM901-063-CA22-Z8R-CT_Q09 30527712 80 12 27 50 60 38 7 0,8 6.500 ICM901-080-CA27-Z12R-CT_Q09 30527713 100 14 32 50 78 44 7 1,5 5.300 ICM901-100-CA32-Z14R-CT_Q09 30527714 125 18 40 63 89 56 7 2,7 4.300 ICM901-125-CA40-Z18R-CT_Q09 30527715 160 20 40 63 89 56 7 4,1 3.300 ICM901-160-CA40-Z20R-CT_Q09 30527716 200 25 60 63 140 7 8,1 2.600 ICM901-200-CA60-Z25R-CT_Q09 30527717 Accessories Spare parts* CT_Q0905 Indexable insert Page 119 CT_Q0905 Clamping screw for indexable insert TORX PLUS M3.5x11-TX10-IP 10105079 Clamping systems / adapters See section Accessories Page 162 CT_Q0905 TORX PLUS screwdriver with handle 10IPx80x191 30414763 Milling cutter clamping screws See section Accessories Page 158 * Supply includes. Dimensions in mm. 46

Tools with ISO elements Milling Shoulder milling cutters Shoulder cutter head with tangential technology ICM90-C4-Finishing κ 90 l 1 a p κ d 2 d 3 d 4 d 1 CT_Q0905 Dimensions a p max. Weight kg Max. spindle speed (min -1 ) Specification Shoulder milling cutters ø d 1 Z e ff ø d 2 l 1 ø d 3 ø d 4 63 6 (4+2) 22 50 48 28 0.4 / 3.0 0,5 8.000 ICM901-063-CA22-Z4+2R-CT_Q09 30395519 80 8 (6+2) 27 50 60 38 0.4 / 3.0 0,9 6.500 ICM901-080-CA27-Z6+2R-CT_Q09 30395522 100 10 (8+2) 32 50 78 44 0.4 / 3.0 1,6 5.300 ICM901-100-CA32-Z8+2R-CT_Q09 30382222 125 12 (9+3) 40 63 89 56 0.4 / 3.0 2,7 4.300 ICM901-125-CA40-Z9+3R-CT_Q09 30395524 160 16 (12+4) 40 63 89 56 0.4 / 3.0 4,0 3.300 ICM901-160-CA40-Z12+4R-CT_Q09 30395526 200 20 (15+5) 60 63 140 0.4 / 3.0 8,3 2.600 ICM901-200-CA60-Z15+5R-CT_Q09 30600993 Accessories Selection notes CT_Q0905... Indexable insert Page 119 CT_H0905 Indexable insert Page 120 Clamping systems / adapters See section Accessories Page 162 a p max. 0.4 mm on assembly with CT_Q0905 and CT_H0905 a p max. 3.0 mm on assembly entirely with CT_Q0905 Milling cutter clamping screws See section Accessories Page 158 Spare parts* CT_Q0905 CT_H0905 Clamping screw for indexable insert TORX PLUS M3.5x11-TX10-IP 10105079 Assembly note: Assembly example ø 160, Z e ff 16 (12+4) CT_Q0905 CT_H0905 TORX PLUS screwdriver with handle 10IPx80x191 Adjusting wedge M4x0.5 Threaded spindle M4x0.5 LH/RHx9 with screw locking 30414763 K14884-351 K1751-74 On assembly with wide face indexable inserts (CT_H0905) 12 pieces CT_Q0905 and 4 pieces CT_H0905 are fitted. Here the wide face indexable inserts (CT_H0905) are fitted in the insert seats with axial adjustment. On assembly without wide face indexable inserts, 16 pieces CT_Q0905 are fitted. For setting instructions see page 195. Hex wrench Wrench size (sw) 2 10004356 * Supply includes. Dimensions in mm. 47

Tools with ISO elements Milling Shoulder milling cutters Shoulder cutter head with radial technology ICM90-S4 κ 90 l1 ap κ d2 d3 d4 d1 SE_T09T3 Dimensions a p max. Weight kg Max. spindle speed (min -1 ) Specification ø d 1 Z e ff ø d 2 l 1 ø d 3 ø d 4 40 4 16 40 32 15,5 7 0,2 10.000 ICM901-040-CA16-Z4R-SE_T09 30412830 50 5 22 50 48 18,5 7 0,5 8.000 ICM901-050-CA22-Z5R-SE_T09 30415685 63 6 22 50 48 18,5 7 0,7 6.300 ICM901-063-CA22-Z6R-SE_T09 30415686 80 7 27 50 60 38 7 1,2 5.000 ICM901-080-CA27-Z7R-SE_T09 30415687 100 9 32 50 78 44 7 1,9 4.000 ICM901-100-CA32-Z9R-SE_T09 30416906 SE_T1504 Dimensions a p max. Weight kg Max. spindle speed (min -1 ) Specification ø d 1 Z e ff ø d 2 l 1 ø d 3 ø d 4 63 5 22 50 48 18,5 13 0,6 7.500 ICM901-063-CA22-Z5R-SE_T15 30412822 80 6 27 50 60 38 13 1,1 6.000 ICM901-080-CA27-Z6R-SE_T15 30412824 100 6 32 50 78 44 13 1,8 4.800 ICM901-100-CA32-Z6R-SE_T15 30412826 125 7 40 63 89 56 13 3,7 3.800 ICM901-125-CA40-Z7R-SE_T15 30412827 160 9 40 63 89 56 13 6,1 3.000 ICM901-160-CA40-Z9R-SE_T15 30412828 200 11 60 63 140-13 9,4 2.400 ICM901-200-CA60-Z11R-SE_T15 30412829 Accessories Spare parts* SE_T09 SE_T15 Indexable insert Page 124 SE_T09T3 Clamping screw for indexable insert TORX PLUS M3x8.5-TX8-IP 10105076 Clamping systems / adapters See section Accessories Page 162 SE_T09T3 TORX PLUS screwdriver with handle 10IPx80x191 30414763 Milling cutter clamping screws* Page 158 SE_T1504 Clamping screw for indexable insert TORX PLUS M5x11-TX20-IP 10105083 SE_T1504 TORX PLUS screwdriver with handle 20IPx100x218 30414766 * Supply includes. Dimensions in mm. 48

Tools with ISO elements Milling Shoulder milling cutters End milling cutter with radial technology ICM90-B2-Shank κ 90 B2 l 1 l 2 a p κ d 2 d 1 BD_T11T3 Dimensions ø d 1 Z e ff ø d 2 l 1 l 2 a p max. Weight kg Max. Spindle speed (min -1 ) Cylindrical shank form Specification Type M** (modified) (standard) Shoulder milling cutters 16 2 16 100 30 8 0,2 43.750 HA ICM901-016-HA16-Z2R-BD_T11 30501382 30420059 16 2 16 68 25 8 0,1 43.750 HB ICM901-016-HB16-Z2R-BD_T11 30501383 30420060 20 3 20 110 30 8 0,3 41.000 HA ICM901-020-HA20-Z3R-BD_T11 30501384 30420061 20 3 20 81 30 8 0,2 41.000 HB ICM901-020-HB20-Z3R-BD_T11 30501385 30420062 25 3 25 120 32 8 0,5 37.500 HA ICM901-025-HA25-Z3R-BD_T11 30501386 30420063 25 3 25 88 32 8 0,3 37.500 HB ICM901-025-HB25-Z3R-BD_T11 30501387 30383780 32 4 32 130 40 8 0,8 33.900 HA ICM901-032-HA32-Z4R-BD_T11 30501388 30420064 32 4 32 100 40 8 0,6 33.900 HB ICM901-032-HB32-Z4R-BD_T11 30501389 30420065 40 5 32 150 50 8 1 30.000 HA ICM901-040-HA32-Z5R-BD_T11 30501390 30420066 40 5 32 110 50 8 0,8 30.000 HB ICM901-040-HB32-Z5R-BD_T11 30501391 30420067 BD_T1704 25 2 25 120 36 14 0,4 35.000 HA ICM901-025-HA25-Z2R-BD_T17 30501392 30420068 25 2 25 92 36 14 0,3 35.000 HB ICM901-025-HB25-Z2R-BD_T17 30501393 30420069 32 3 32 130 40 14 0,7 30.000 HA ICM901-032-HA32-Z3R-BD_T17 30501394 30420070 32 3 32 100 40 14 0,5 30.000 HB ICM901-032-HB32-Z3R-BD_T17 30501395 30420071 40 4 32 150 50 14 1 25.000 HA ICM901-040-HA32-Z4R-BD_T17 30501396 30420072 40 4 32 110 50 14 0,7 25.000 HB ICM901-040-HB32-Z4R-BD_T17 30501397 30420073 Accessories Spare parts* BD_T11T3 BD_T1704 Indexable insert** Page 122-124 BD_T11T3 Clamping screw for indexable insert TORX M2.5x5.4-TX8 30419328 See catalogue "MAPAL competence clamping technology" BD_T11T3 TORX screwdriver with handle TX8x60x164 10019467 BD_T1704 Clamping screw for indexable insert TORX M4x6.9-TX15 30419329 BD_T1704 TORX screwdriver with handle TX15x80x191 10019469 * Supply includes. ** On assembly with indexable inserts with a radius >1.2 mm, the modified milling cutter type M must be selected. Alternatively the standard milling cutter can be ordered and re-worked by the customer. Information on this aspect is given in the Technical appendix on page 193. Dimensions in mm. 49

Tools with ISO elements Milling Shoulder milling cutters Shoulder cutter head with radial technology ICM90-B2 κ 90 l1 ap κ d3 d2 d4 d1 BD_T1704 Dimensions ø d 1 Z e ff ø d 2 l 1 ø d 3 ø d 4 a p max. Weight kg Max. spindle speed (min -1 ) Specification Type M** (modified) (standard) 40 4 16 40 34 14 14 0,2 25.000 ICM901-040-CA16-Z4R-BD_T17 30501398 30383785 50 4 22 40 40 18 14 0,3 17.000 ICM901-050-CA22-Z4R-BD_T17 30501399 30420074 63 5 22 40 40 18 14 0,5 14.500 ICM901-063-CA22-Z5R-BD_T17 30501400 30420075 80 6 27 50 52,5 20 14 1 12.000 ICM901-080-CA27-Z6R-BD_T17 30501401 30420076 100 7 32 55 65 26 14 1,8 10.500 ICM901-100-CA32-Z7R-BD_T17 30501402 30420077 Accessories Spare parts* BD_T1704 Indexable insert** Page 122-123 BD_T1704 Clamping screw for indexable insert TORX M4x6.9-TX15 30419329 Clamping systems / adapters See section Accessories Page 162 BD_T1704 TORX screwdriver with handle TX15x80x191 10019469 Milling cutter clamping screws See section Accessories Page 158 * Supply includes. ** On assembly with indexable inserts with a radius >1.2 mm, the modified milling cutter type M must be selected. Alternatively the standard milling cutter can be ordered and re-worked by the customer. Information on this aspect is given in the Technical appendix on page 193. Dimensions in mm. 50

Tools with ISO elements Milling Shell end face milling cutters Shell end face milling cutters ISM Shell end face milling cutters 90 Radial Tangential ISM90-B2-Shank ISM90-B2 ISM90-C2/C4-HSK ISM90-C2/C4-SK Shell end face milling cutters Properties - Internal coolant supply - Fixed insert seats - Without internal coolant supply - Internal coolant supply - Fixed insert seats Application notes - For roughing - Ideal for heavy machining, flute milling, trimming, shoulder milling - For high chip volume - For roughing - For deep shoulder milling and trimming - For large cutting depths (ap) Preferred for steel and aluminium, to a limited extent for castings. Assembly note The carrier tool is fitted with the same number of indexable inserts of design R72/R73 or R73/R74. Please pay attention to the markings on the carrier tool. BDMT 11T3 BDMT 1704 Two-cutting edge indexable insert CT_D09T3 Preferred for aluminium and titanium. Four-cutting edge indexable insert CT_Q0905 Preferred for castings, to a limited extent for steel. R72 R73 R73 R74 51

Tools with ISO elements Milling Shell end face milling cutters Shell end face milling cutter with radial technology l 1 ISM90-B2-Shank l 2 κ 90 a p κ d 2 d 1 BD_T11T3 Dimensions No. of ø d 1 Z e ff ø d 2 l 1 l inserts 2 a p max. Weight kg Max. spindle speed (min -1 ) Cylindrical shank form Specification Type M** (modified) (standard) 25 2 8 25 120 46 37 0,4 26.250 HA ISM901-025-HA25-Z2R-BD_T11 30501403 30420047 25 2 8 25 104 46 37 0,3 26.250 HB ISM901-025-HB25-Z2R-BD_T11 30501404 30420048 32 2 10 32 140 55 46 0,8 23.700 HA ISM901-032-HA32-Z2R-BD_T11 30501405 30420049 32 2 10 32 117 55 46 0,6 23.700 HB ISM901-032-HB32-Z2R-BD_T11 30501406 30420050 32 4 20 32 140 55 46 0,7 23.700 HA ISM901-032-HA32-Z4R-BD_T11 30501407 30420051 32 4 20 32 117 55 46 0,6 23.700 HB ISM901-032-HB32-Z4R-BD_T11 30501408 30420052 40 4 24 32 150 64 55 1 21.000 HA ISM901-040-HA32-Z4R-BD_T11 30501409 30420053 40 4 24 32 126 64 55 0,8 21.000 HB ISM901-040-HB32-Z4R-BD_T11 30501410 30383783 Accessories Spare parts* BD_T11T3 Indexable insert** Page 123 BD_T11T3 Clamping screw for indexable insert TORX M2.5x5.4-TX8 30419328 See catalogue "MAPAL competence clamping technology" BD_T11T3 TORX screwdriver with handle TX8x60x164 10019467 * Supply includes. ** On assembly with indexable inserts with a radius >1.2 mm, the modified milling cutter type M must be selected. Alternatively the standard milling cutter can be ordered and re-worked by the customer. Information on this aspect is given in the Technical appendix on page 193. Dimensions in mm. 52 Assembly note The carrier tool is fitted with the same number of indexable inserts of design R72/R73 or R73/R74. Please pay attention to the markings on the carrier tool. BDMT 11T3 R72 R73

Tools with ISO elements Milling Shell end face milling cutters Shell end face milling cutter with radial technology ISM90-B2 l 1 ap κ 90 κ d 2 d 4 d 1 BD_T11T3 No. of ø d 1 Z e ff ø d 2 l 1 ø d inserts 4 No. of ø d 1 Z e ff ø d 2 l 1 ø d inserts 4 a p max. 40 4 16 16 50 15 37 0,3 17.500 ISM900-040-CA16-Z4R-BD_T11 30501411 30420054 50 6 30 22 63 18 46 0,6 11.900 ISM900-050-CA22-Z6R-BD_T11 30501412 30420055 BD_T1704 Dimensions Dimensions a p max. Weight kg Weight kg Max. spindle speed (min -1 ) Max. spindle speed (min -1 ) Specification Specification Type M** (modified) Type M** (modified) (standard) (standard) 50 4 16 22 78 18 59 0,6 11.900 ISM900-050-CA22-Z4R-BD_T17 30501413 30420056 63 4 12 27 70 20 45 1 10.000 ISM900-063-CA27-Z4R-BD_T17 30501414 30383784 80 6 24 32 85 26 59 2 8.400 ISM900-080-CA32-Z6R-BD_T17 30501415 30420057 100 6 24 40 85 56 59 3 7.300 ISM900-100-CA40-Z6R-BD_T17 30501416 30420058 Shell end face milling cutters Accessories Spare parts* BD_T11T3 BD_T1704 Indexable insert** Page 123 BD_T11T3 Clamping screw for indexable insert TORX M2.5x5.4-TX8 30419328 Clamping systems / adapters See section Accessories Page 162 BD_T11T3 TORX screwdriver with handle TX8x60x164 10019467 Milling cutter clamping screws See section Accessories Page 158 BD_T1704 Clamping screw for indexable insert TORX M4x6.9-TX15 30419329 BD_T1704 TORX screwdriver with handle TX15x80x191 10019469 * Supply includes. ** On assembly with indexable inserts with a radius >1.2 mm, the modified milling cutter type M must be selected. Alternatively the standard milling cutter can be ordered and re-worked by the customer. Information on this aspect is given in the Technical appendix on page 193. Dimensions in mm. Assembly note The carrier tool is fitted with the same number of indexable inserts of design R72/R73 or R73/R74. Please pay attention to the markings on the carrier tool. BDMT 11T3 BDMT 1704 R72 R73 R73 R74 53

Tools with ISO elements Milling Shell end face milling cutters Shell end face milling cutter with tangential technology l ISM90-C2-HSK, 1 l 2 ISM90-C4-HSK a p κ 90 κ d 1 CT_D09T3 No. of Nominal size ø d 1 Z e ff l 1 l inserts HSK-A 2 No. of Nominal size ø d 1 Z e ff l 1 l inserts HSK-A 2 a p max. 63 3 30 100 130 100 75 3,8 10.100 ISM901-063-A100-Z3R-CT_D09 30425932 80 4 40 100 130 100 75 5,1 8.000 ISM901-080-A100-Z4R-CT_D09 30395633 100 4 40 100 130 100 75 6,5 6.400 ISM901-100-A100-Z4R-CT_D09 30395638 CT_Q0905 Dimensions Dimensions a p max. Weight kg Weight kg Max. spindle speed (min -1 ) Max. spindle speed (min -1 ) Specification Specification 63 4 40 100 130 100 75 4 8.000 ISM901-063-A100-Z4R-CT_Q09 30395627 80 4 40 100 130 100 75 5,2 6.500 ISM901-080-A100-Z4R-CT_Q09 30395634 100 5 50 100 130 100 75 5,2 5.300 ISM901-100-A100-Z5R-CT_Q09 30395640 Accessories Spare parts* CT_D09T3 Indexable insert Page 116-117 CT_D09T3 Clamping screw for indexable insert TORX PLUS M3.5x9.4-TX10-IP 10007315 CT_Q0905 Indexable insert Page 119 CT_Q0905 Clamping screw for indexable insert TORX PLUS M3.5x11-TX10-IP 10105079 CT_D09T3 CT_Q0905 TORX PLUS screwdriver with handle 10IPx80x191 30414763 CT_D09T3 CT_Q0905 Threaded pin M3x8 wrench size (sw) 1.5 ICø1.2 30433620 CT_D09T3 CT_Q0905 Hex wrench Wrench size (sw) 1.5 10004870 CT_D09T3 CT_Q0905 Coolant tube HSK100 30326008 * Supply includes. Dimensions in mm. 54

Tools with ISO elements Milling Shell end face milling cutters Shell end face milling cutter with tangential technology ISM90-C2-ISO, ISM90-C4-ISO κ 90 l 1 l 2 a p κ d 1 CT_D09T3 Dimensions No. of Nominal size ø d 1 Z e ff l 1 l inserts ISO 2 a p max. Weight kg Max. spindle speed (min -1 ) Specification 63 3 30 50 130 110 75 5 10.100 ISM901-063-S050-Z3R-CT_D09 30425933 80 4 40 50 130 110 75 6 8.000 ISM901-080-S050-Z4R-CT_D09 30395635 100 4 40 50 130 110 75 8 6.400 ISM901-100-S050-Z4R-CT_D09 30395641 Shell end face milling cutters CT_Q0905 Dimensions No. of Nominal size ø d 1 Z e ff l 1 l inserts ISO 2 a p max. Weight kg Max. spindle speed (min -1 ) Specification 63 4 40 50 130 110 75 5 8.000 ISM901-063-S050-Z4R-CT_Q09 30395631 80 4 40 50 130 110 75 6 6.500 ISM901-080-S050-Z4R-CT_Q09 30395637 100 5 50 50 130 110 75 8 5.300 ISM901-100-S050-Z5R-CT_Q09 30395642 Accessories Spare parts* CT_D09T3 Indexable insert Page 116-117 CT_D09T3 Clamping screw for indexable insert TORX PLUS M3.5x9.4-TX10-IP 10007315 CT_Q0905 Indexable insert Page 119 CT_Q0905 Clamping screw for indexable insert TORX PLUS M3.5x11-TX10-IP 10105079 CT_D09T3 CT_Q0905 TORX PLUS screwdriver with handle 10IPx80x191 30414763 CT_D09T3 CT_Q0905 Threaded pin M3x8 wrench size (sw) 1.5 ICø1.2 30433620 CT_D09T3 CT_Q0905 Hex wrench Wrench size (sw) 1.5 10004870 * Supply includes. Dimensions in mm. 55

Tools with ISO elements Milling Helix milling cutters Helix milling cutters IHM Helix milling cutters 90 Tangential IHM90-C2-HSK IHM90-C4-HSK IHM90-C2 IHM90-C4 Properties - Internal coolant supply - Fixed insert seats - Vibration damper - Internal coolant supply - Fixed insert seats Application notes - For roughing large bores - Preferred for long projection lengths - Ideal for machining centres - Can be adapted using HSK connection - For high material removal rate - For roughing large bores - Preferred for short projection lengths - Ideal for machine tools with extending sleeve - For high material removal rate Two-cutting edge indexable insert CT_D09T3 Four-cutting edge indexable insert CT_Q0905 Two-cutting edge indexable insert CT_D09T3 Four-cutting edge indexable insert CT_Q0905 Preferred for aluminium. Preferred for castings, to a limited extent for steel. Preferred for aluminium. Preferred for castings, to a limited extent for steel. 56

Tools with ISO elements Milling Helix milling cutters Helix milling cutter with tangential technology IHM90-C2-HSK, IHM90-C4-HSK κ 90 l1 l2 ap κ d1 CT_D09T3 No. of Nominal size ø d 1 Z e ff l 1 l inserts HSK-A 2 a p max. 80 4 20+4 63 90 64 35 2,6 8.000 IHM901-080-A063-Z4R-CT_D09 30395675 100 4 20+4 80 110 84 35 4,9 6.400 IHM901-100-A080-Z4R-CT_D09 30395676 125 5 25+5 100 110 81 35 7,8 5.100 IHM901-125-A100-Z5R-CT_D09 30395677 140 5 25+5 100 110 81 35 9,0 4.600 IHM901-140-A100-Z5R-CT_D09 30395678 160 6 30+6 100 110 81 35 11,1 4.000 IHM901-160-A100-Z6R-CT_D09 30395679 CT_Q0905 Dimensions Weight kg Max. spindle speed (min -1 ) Specification Helix milling cutters Dimensions a p max. Weight kg ø d 1 Z e ff No. of Nominal size inserts HSK-A l 1 l 2 Max. spindle speed (min -1 ) Specification 80 4 20+4 63 90 64 35 2,6 6.500 IHM901-080-A063-Z4R-CT_Q09 30346711 100 4 20+4 80 110 84 35 5,0 5.250 IHM901-100-A080-Z4R-CT_Q09 30346712 125 5 25+5 100 110 81 35 7,8 4.250 IHM901-125-A100-Z5R-CT_Q09 30340468 140 5 25+5 100 110 81 35 8,8 3.750 IHM901-140-A100-Z5R-CT_Q09 30346713 160 6 30+6 100 110 81 35 11,1 3.250 IHM901-160-A100-Z6R-CT_Q09 30346714 Accessories Spare parts* CT_D09T3 Indexable insert Page 116-117 CT_D09T3 Clamping screw for indexable insert TORX PLUS M3.5x9.4-TX10-IP 10007315 CT_Q0905 Indexable insert Page 119 CT_Q0905 Clamping screw for indexable insert TORX PLUS M3.5x11-TX10-IP 10105079 Assembly note CT_D09T3 and CT_Q0905 ø d 1 Number of indexable inserts Right design Left design 80 20+4 20 4 100 20+4 20 4 125 25+5 25 5 140 25+5 25 5 160 30+6 30 6 CT_D09T3 CT_Q0905 CT_D09T3 CT_Q0905 CT_D09T3 CT_Q0905 TORX PLUS screwdriver with handle 10IPx80x191 Threaded pin M3x8 wrench size (sw) 1.5 ICø1.2 Hex wrench Wrench size (sw) 1.5 Coolant tube HSK100 30414763 30433620 10004870 30326008 * Supply includes. Dimensions in mm. 57

Tools with ISO elements Milling Helix milling cutters Helix milling cutter with tangential technology IHM90-C2, IHM90-C4 κ 90 l 1 a p κ d 4 d 2 d 3 d 1 CT_D09T3 No. of ø d 1 Z e ff ø d 2 l 1 ø d 3 ø d inserts 4 No. of ø d 1 Z e ff ø d 2 l 1 ø d 3 ø d inserts 4 a p max. 125 5 25+5 40 75 89 56 35 4,6 5.100 IHM901-125-CA40-Z5R-CT_D09 30395669 140 5 25+5 40 75 89 56 35 5,6 4.600 IHM901-140-CA40-Z5R-CT_D09 30395670 160 6 30+6 40 75 89 56 35 7,3 4.000 IHM901-160-CA40-Z6R-CT_D09 30395672 CT_Q0905 a p max. 125 5 25+5 40 75 89 56 35 4,5 4.250 IHM901-125-CA40-Z5R-CT_Q09 30405299 140 5 25+5 40 75 89 56 35 5,6 3.750 IHM901-140-CA40-Z5R-CT_Q09 30346719 160 6 30+6 40 75 89 56 35 7,4 3.250 IHM901-160-CA40-Z6R-CT_Q09 30346720 Accessories Dimensions Dimensions Weight kg Weight kg Max. spindle speed (min -1 ) Max. spindle speed (min -1 ) Spare parts* Specification Specification CT_D09T3 Indexable insert Page 116-117 CT_D09T3 Clamping screw for indexable insert TORX PLUS M3.5x9.4-TX10-IP 10007315 CT_Q0905 Indexable insert Page 119 CT_Q0905 Clamping screw for indexable insert TORX PLUS M3.5x11-TX10-IP 10105079 Clamping systems / adapters See section Accessories Page 162 CT_D09T3 CT_Q0905 TORX PLUS screwdriver with handle 10IPx80x191 30414763 Milling cutter clamping screws See section Accessories Page 158 CT_D09T3 CT_Q0905 Threaded pin M3x8 wrench size 1.5 (sw) ICø1.2 30433620 Assembly note CT_D09T3 and CT_Q0905 CT_D09T3 CT_Q0905 Hex wrench Wrench size (sw) 1.5 10004870 ø d 1 125 25+5 25 5 140 25+5 25 5 160 30+6 30 6 * Supply includes. Dimensions in mm. 58 Number of indexable inserts Right design Left design

Tools with ISO elements Milling Disc milling cutters Disc milling cutters IDM Disc milling cutters 88 and 90 Tangential IDM90-C2-L/R IDM90-C4-L/R IDM90-C2-LR IDM90-C4-LR IDM88-L8-L/R Properties - Without internal coolant supply - Can be adjusted axially for finishing Illustration - Without internal coolant supply - Can be adjusted axially for finishing - Without internal coolant supply - Can be adjusted axially for finishing - Axial adjustment for finish machining Disc milling cutters Application notes - Suitable for roughing and finishing - Can also be used as gang milling cutter/ milling shaft - Flute milling not possible - 90 shoulder surfaces possible - Suitable for roughing and finishing - Can also be used as gang milling cutter/ milling shaft - Flute milling possible - 90 shoulder surfaces possible - Suitable for roughing and finishing - Can also be used as gang milling cutter/ milling shaft - Flute milling not possible Preferred for castings and steel. Two-cutting edge indexable insert CT_D09T3 Four-cutting edge indexable insert CT_Q0905 On the usage of insert size LT_U1507 the backing plate must be removed! Fitting LT_U1505 Preferred for aluminium also PCD-tipped. Preferred for castings and steel. For castings also PcBN-tipped. Fitting LT_U1507 59

Tools with ISO elements Milling Disc milling cutters Disc milling cutter with tangential technology IDM90-C2-L/R Left or right-side cutting κ 90 l 1 a p κ d 3 d 2 d 1 a e CT_D09T3, right-side cutting Dimensions ø d 1 Z e ff Z axial** l 1 ø d 2 ø d 3 a e max. a e max. Weight kg Max. spindle speed (min -1 ) Specification 100 10 5 17 32 58 7 18 0,7 6.400 IDM900-100-CA32-Z10R2-CT_D09 30395683 125 12 6 17 32 58 7 30 1,2 5.100 IDM900-125-CA32-Z12R2-CT_D09 30383559 160 14 7 17 40 70 7 40 2,0 4.000 IDM900-160-CA40-Z14R2-CT_D09 30395699 200 16 8 17 40 70 7 60 3,3 3.200 IDM900-200-CA40-Z16R2-CT_D09 30395710 CT_D09T3, left-side cutting Dimensions ø d 1 Z e ff Z axial** l 1 ø d 2 ø d 3 a p max. a e max. Weight kg Max. spindle speed (min -1 ) Specification 100 10 5 17 32 58 7 18 0,7 6.400 IDM900-100-CA32-Z10R1-CT_D09 30395684 125 12 6 17 32 58 7 30 1,2 5.100 IDM900-125-CA32-Z12R1-CT_D09 30383558 160 14 7 17 40 70 7 40 2,0 4.000 IDM900-160-CA40-Z14R1-CT_D09 30395700 200 16 8 17 40 70 7 60 3,3 3.200 IDM900-200-CA40-Z16R1-CT_D09 30395711 Accessories Spare parts* CT_D09T3 Indexable insert Page 116-117 CT_D09T3 TORX PLUS M3.5x9.4-TX10-IP 10007315 Clamping systems / adapters See section Accessories Page 162 CT_D09T3 TORX PLUS screwdriver with handle 10IPx80x191 30414763 Spacer See section Accessories Page 161 CT_D09T3 Threaded pin ISO 4026-M3X5-45H 10003421 CT_D09T3 Hex wrench Wrench size (sw) 1.5 10004870 * Supply includes. ** Quantity of axial adjustable indexable inserts. Dimensions in mm. 60

Tools with ISO elements Milling Disc milling cutters Disc milling cutter with tangential technology IDM90-C2-LR Both sides three-sided cutting κ 90 l 1 κ d 3 d 2 d 1 a e CT_D09T3 a p Dimensions No. of ø d 1 Z e ff Z axial** l 1 ø d 2 ø d inserts 3 a p max. a e max. 100 10 5+5 2+2 17 32 58 17 18 0,7 6.400 IDM900-100-CA32-Z5+5R3-CT_D09 30395685 125 12 6+6 3+3 17 32 58 17 30 1,2 5.100 IDM900-125-CA32-Z6+6R3-CT_D09 30383557 160 14 7+7 3+3 17 40 70 17 40 2,0 4.000 IDM900-160-CA40-Z7+7R3-CT_D09 30395701 200 16 8+8 4+4 17 40 70 17 60 3,3 3.200 IDM900-200-CA40-Z8+8R3-CT_D09 30395712 Weight kg Max. spindle speed (min -1 ) Specification Disc milling cutters Accessories Spare parts* CT_D09T3 Indexable insert Page 116-117 CT_D09T3 TORX PLUS M3.5x9.4-TX10-IP 10007315 Clamping systems / adapters See section Accessories Page 162 CT_D09T3 TORX PLUS screwdriver with handle 10IPx80x191 30414763 Spacer See section Accessories Page 161 CT_D09T3 Threaded pin ISO 4026-M3X5-45H 10003421 CT_D09T3 Hex wrench Wrench size (sw) 1.5 10004870 * Supply includes. ** Quantity of axial adjustable indexable inserts. Dimensions in mm. 61

Tools with ISO elements Milling Disc milling cutters Disc milling cutter with tangential technology IDM90-C4-L/R Left or right-side cutting κ 90 l1 κ d3 d2 d1 ae CT_Q0905, right-side cutting ap Dimensions ø d 1 Z e ff Z axial** l 1 ø d 2 ø d 3 a p max. a e max. Weight kg Max. spindle speed (min -1 ) Specification 100 10 5 17 32 58 7 18 0,7 5.250 IDM900-100-CA32-Z10R2-CT_Q09 30395687 125 12 6 17 32 58 7 30 1,2 4.250 IDM900-125-CA32-Z12R2-CT_Q09 30382218 160 14 7 17 40 70 7 40 2,0 3.250 IDM900-160-CA40-Z14R2-CT_Q09 30395702 200 16 8 17 40 70 7 60 3,2 2.500 IDM900-200-CA40-Z16R2-CT_Q09 30395715 CT_Q0905, left-side cutting Dimensions ø d 1 Z e ff Z axial** l 1 ø d 2 ø d 3 a p max. a e max. Weight kg Max. spindle speed (min -1 ) Specification 100 10 5 17 32 58 7 18 0,7 5.250 IDM900-100-CA32-Z10R1-CT_Q09 30395688 125 12 6 17 32 58 7 30 1,2 4.250 IDM900-125-CA32-Z12R1-CT_Q09 30382217 160 14 7 17 40 70 7 40 2,0 3.250 IDM900-160-CA40-Z14R1-CT_Q09 30395703 200 16 8 17 40 70 7 60 3,2 2.500 IDM900-200-CA40-Z16R1-CT_Q09 30395716 Accessories Spare parts* CT_Q0905 Indexable insert Page 119 CT_Q0905 TORX PLUS M3.5x11-TX10-IP 10105079 Clamping systems / adapters See section Accessories Page 162 CT_Q0905 TORX PLUS screwdriver with handle 10IPx80x191 30414763 Spacer See section Accessories Page 161 CT_Q0905 Threaded pin ISO 4026-M3X5-45H 10003421 CT_Q0905 Hex wrench Wrench size (sw) 1.5 10004870 * Supply includes. ** Quantity of axial adjustable indexable inserts. Dimensions in mm. 62

Tools with ISO elements Milling Disc milling cutters Disc milling cutter with tangential technology IDM90-C4-LR Both sides three-sided cutting κ 90 l 1 κ d 3 d 2 d 1 a e CT_Q0905 a p Dimensions No. of ø d 1 Z e ff Z axial** l 1 ø d 2 ø d inserts 3 a p max. a e max. 100 10 5+5 2+2 17 32 58 17 18 0,7 5.250 IDM900-100-CA32-Z5+5R3-CT_Q09 30395690 125 12 6+6 3+3 17 32 58 17 30 1,2 4.250 IDM900-125-CA32-Z6+6R3-CT_Q09 30382216 160 14 7+7 3+3 17 40 70 17 40 2,0 3.250 IDM900-160-CA40-Z7+7R3-CT_Q09 30395704 200 16 8+8 4+4 17 40 70 17 60 3,2 2.500 IDM900-200-CA40-Z8+8R3-CT_Q09 30395717 Weight kg Max. spindle speed (min -1 ) Specification Disc milling cutters Accessories Spare parts* CT_Q0905 Indexable insert Page 119 CT_Q0905 TORX PLUS M3.5x11-TX10-IP 10105079 Clamping systems / adapters See section Accessories Page 162 CT_Q0905 TORX PLUS screwdriver with handle 10IPx80x191 30414763 Spacer See section Accessories Page 161 CT_Q0905 Threaded pin ISO 4026-M3X5-45H 10003421 CT_Q0905 Hex wrench Wrench size (sw) 1.5 10004870 * Supply includes. ** Quantity of axial adjustable indexable inserts. Dimensions in mm. 63

Tools with ISO elements Milling Disc milling cutters Disc milling cutter with tangential technology IDM88-L8-L/R Left or right-side cutting κ 88 l 1 κ d 3 d 2 d 1 a e LT_U15, right-side cutting a p Dimensions ø d 1 Z e ff Z axial** l 1 ø d 2 ø d 3 a p max. a e max. Weight kg Max. spindle speed (min -1 ) Specification 100 8 4 27,5 32 58 11 18 1,3 5.250 IDM880-100-CA32-Z8R2-LT_U15 30395692 125 10 5 27,5 32 58 11 30 2,1 4.250 IDM880-125-CA32-Z10R2-LT_U15 30383561 160 12 6 27,5 40 70 11 40 3,5 3.250 IDM880-160-CA40-Z12R2-LT_U15 30395705 200 14 7 27,5 40 70 11 60 5,5 2.500 IDM880-200-CA40-Z14R2-LT_U15 30395718 LT_U15, left-side cutting 100 8 4 27,5 32 58 11 18 1,3 5.250 IDM880-100-CA32-Z8R1-LT_U15 30395693 125 10 5 27,5 32 58 11 30 2,1 4.250 IDM880-125-CA32-Z10R1-LT_U15 30383560 160 12 6 27,5 40 70 11 40 3,5 3.250 IDM880-160-CA40-Z12R1-LT_U15 30395707 200 14 7 27,5 40 70 11 60 5,5 2.500 IDM880-200-CA40-Z14R1-LT_U15 30395719 Accessories Selection note LT_U1505 Indexable insert Page 121 On the usage of insert size LT_U1507 the backing plate must be removed. LT_U1507 Indexable insert Page 121 Clamping systems / adapters See section Accessories Page 162 Spacer See section Accessories Page 161 Fitting LT_U1505 Fitting LT_U1507 Spare parts* Spare parts* LT_U1505 LT_U1507 TORX PLUS M4x17-TX15-IP 30414702 LT_U1505 Backing plate 15.7x2.38x9.26 30413233 LT_U1505 LT_U1507 TORX PLUS screwdriver with handle 15IPx80x191 30414764 LT_U1505 LT_U1507 Threaded bush M6x0.5x12-sw4 30413235 LT_U1505 LT_U1507 Threaded pin ISO 4026-M3X5-45H 10003421 LT_U1505 LT_U1507 Hex wrench Wrench size (sw) 4 10005339 LT_U1505 LT_U1507 Hex wrench Wrench size (sw) 1.5 10004870 Dimensions in mm. * Supply includes. ** Quantity of axial adjustable indexable inserts. 64

Tools with ISO elements Milling Disc milling cutters Milling cutters with special designs As an addition to the PerformanceMill standard ranges, milling tools with special designs are also manufactured at MAPAL; these tools are designed individually for special applications. For example complex shapes or contours are machined using innovative circular milling cutters that have particularly high performance due to the use of tangential technology. By means of multi-stage milling tools or the combination of milling cutters with solid carbide drills, tool changes and as a result machining times can be significantly reduced. In unstable machining situations or in case of large projection lengths, custom milling cutters are designed with vibration dampers to increase the machining quality and tool life. Advantages: Multi-stage milling cutters reduce tool changes Advantages of tangential technology also on custom milling cutters Customer-specific shapes and contours can be realised Disc milling cutters 65

66

Tools with ISO elements Indexable inserts Radial and tangential indexable inserts MAPAL has a wide range of radial and tangential indexable inserts that covers all requirements for different cutting materials and coatings as well as the related cutting edge geometries and accuracies. Ground, highly accurate indexable inserts in tolerance class (H) make possible, in conjunction with precisely machined insert seats, the smallest variations between the cutting edges on multi-cutting edge tools, even in case of fixed installation, which provides a "real" multi-cutting edge capability and as a result permits significant performance increases. Sintered radial and tangential indexable inserts in tolerance class (M) expand the programme with particularly cost-effective alternatives, in particular for machining with larger permissible tolerances. Programme overview indexable inserts 68 Model key 72 Cutting material overview 76 Overview of chip guiding stages - boring 82 Indexable inserts boring 88 Indexable inserts milling 116 Special inserts 125 Through bore Suitable for open bores. Not suitable for machining shoulders if 90 angle is required. Blind bore Suitable for closed bores and machining shoulders taking into account the cutting edge length. Chamfering / countersinking Insert can be used for all chamfer angles. Not suitable for cutting stages, for example entry diameter on fits and threads. Indexable insert Introduction BS L00 BS L10 Arc shaped land - blind bore Special support surface on the cutting edges at 0 contact angle for quiet running and better surfaces. Arc shaped land - through bore Special support surface on the cutting edges at 10 contact angle for quiet running and better surfaces. 67

Tools with ISO elements Indexable inserts Overview Indexable inserts boring Tangential technology Insert type CTHD CTHQ FTHQ Features Number of cutting edges 2 1 4 1 4 Insert size 06 / 09 / 12 06 / 09 / 12 06 / 09 / 12 Diameter range from 28 mm from 28 mm from 22 mm Cutting direction L / R L / R L L / R Boring-neutral n n n n n Boring-arc shaped land n n n Countersinking / chamfering Cutting material Roughing Medium machining Finishing Carbide PCD PcBN Ceramic Cermet Page n n n n n n n n n n n n n n n n n 88-89 88 90-92 93-95 Radial technology Insert type CCMT - CCGT CCGW CCHT DCMT - DCGT - DCGW SPMT - SCMT - SCGT Features Number of cutting edges 2 1 2 1 2 2 1 4 1 Insert size 06 / 09 / 12 06 / 09 06 / 09 06 / 09 / 12 07 / 11 06 / 09 / 12 06 / 09 Diameter range from 17 mm from 17 mm from 17 mm from 18.6 mm* from 17 mm Cutting direction N L / R N L / R L / R N N Boring-neutral n n n n n Boring-arc shaped land Countersinking / chamfering Application Application Cutting material 68 Roughing Medium machining Finishing Carbide PCD PcBN Ceramic Cermet Page n n n n n n n n n n n n n n n n n n n n n n n n n n 101 102 103-104 105 106 *In case of favourable installation situation

Tools with ISO elements Indexable inserts Overview FTHQ FTHW STHD / STHE WTHQ 1 2 1 4 1 6 1 06 / 09 / 12 09 06 / 09 07 / 09 from 22 mm from 60 mm from 37 mm L L N L / R n n n n n n n n n n n n n n n n n n n n n n n n n n n n 93-95 96 97 98-100 SPGW - SCGW SPHT - SCHT SPHT - SCHT TCMT - TCGW TCHT VBMT - VCMT - VBGW - VCGT - VCGW Indexable insert Introduction 4 1 4 2 3 1 3 1 2 1 06 / 09 / 12 09 / 12 06 / 09 / 12 06 / 09 / 12 09 / 11 / 16 11 09 / 11 / 16 11 / 16 16 from 17 mm from 17 mm from 17 mm from 17 mm from 17 mm VB from 29.1 mm* / VC from 22.2 mm* N L / R N N L / R N N n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n 107 108-109 110 111 112-114 115 69

Tools with ISO elements Indexable inserts Overview Indexable inserts milling Insert type Tangential technology CTND CTHD CTHA Features Milling cutters Number of cutting edges Insert size Cutting direction Face milling cutters Shoulder milling cutters Disc milling cutters Porcupine milling cutters Helix milling cutters 2 2 1 2 1 09 09 09 L / R L / R R n n n n n n n n n n n n n n n Application Roughing Medium machining Finishing n n n n n n n n Cutting material Carbide PCD PcBN n n n n n n n Page 116 117 118 BDGT BDMT SEMT 2 1 2 2 4 11 / 17 11 / 17 09 / 15 R R R n n n n n n n n n n n n n n n n n n n n n n 122 123 124 70

Tools with ISO elements Indexable inserts Overview CTMQ CTHQ CTHH LTHU 4 4 1 2 1 4 + 4 09 09 09 15 R L / R R N n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n n 119 119 120 121 n n Indexable insert Introduction 71

Tools with ISO elements Indexable inserts Designation key tangential Designation key tangential indexable inserts W T H Q 0 9 0 6 0 8 Insert form Tolerance Insert type Insert size Insert thickness C (80 ) F (70 ) L (90 ) S (90 ) W (80 ) d H ±0,013 ±0,025 G ±0,025 ±0,13 N M d ±0,05 ±0,15 ±0,05 ±0,15 s ±0,025 ±0,13 s 20 15 15 A D E H Q 40-60 40-60 40-60 40-60 40-60 inscribed circle d d d d d l l l l l d (mm) W C F L S 6,35 06/09 06 06 10,16 07 9,525 09/13 09 15 09 12,7 12/18 12 13,65 09 Code s (mm) 03 3,18 T3 3,97 04 4,76 05 5,56 06 6,35 07 7,94 U 40-60 Corner radius Chamfer lead TFB W 40-60 Code r (mm) Code Chamfer 00 0 MA 0,4x75 Indexable insert 04 0,4 08 0,8 MC 0,55x45 MG 1x30 12 1,2 20 2,0 30 3,0 T Tangential 72

Tools with ISO elements Indexable inserts Designation key tangential A 3 2 L 0 0 B 0 4 1 - H U 6 1 5 Cutting direction Contact angle Cutting material L Boring Milling Left Arc shaped land HU615 R Code Angle Code Angle (Example) 00 0 90 90 Right 10 10 75 75 N Indexable insert Introduction Chip groove Arc shaped land Finishing cutting edge milling Code letter A 01 99 B012 12 Code Length M018 1,8 C 01 99 D 01 99 G 01 99 B016 16 B021 21 B026 25 B041 40 B081 80 CTHQ/FTHQ/WTHQ Code Radius M050 R 050 M100 R 100 H 01 99 B030 30 B060 60 B090 90 FTHW 73

Tools with ISO elements Indexable inserts Designation key radial Designation key radial indexable inserts S C H T 0 9 T 3 0 4 Insert form Tolerance Insert type Insert size Insert thickness S (90 ) C (80 ) T (60 ) D (55 ) d m s 40-60 d d d d d d m s W 40-60 H ±0,013 ±0,013 ±0,025 T G ±0,025 ±0,025 von ±0,05 bis ±0,13 * N von ±0,05 von ±0,08 ±0,025 bis ±0,15 * bis ±0,20 * Incircle l l l l l d (mm) B S C T D V 5,56 05 09 6,35 06 06 11 07 11 6,70 11 7,938 07 08 9,525 09 09 16 11 16 9,60 17 12,70 12 12 22 15 15,875 15 Code s (mm) T1 1,98 02 2,38 03 3,18 T3 3,97 04 4,76 V (35 ) M von ±0,05 bis ±0,15 * von ±0,08 bis ±0,20 * von ±0,05 bis ±0,13 * B (82 ) * Tolerance dependent of the insert size Corner radius Clearance angle C 7 P 11 D 15 E 20 Code r (mm) 02 0,2 04 0,4 08 0,8 12 1,2 16 1,6 20 2,0 24 2,4 31 3,1 40 4,0 74

Tools with ISO elements Indexable inserts Designation key radial Not required with sintered inserts F 0 1 L - U 3 0 - H U 6 1 5 Ground indexable insert Cutting edge design Cutting direction Cutting material L Code letter Design HU615 Sharp edged Left R (Example) F 01 Right 01 E 02 04 Rounded Bevelled N Neutral X Ground chip groove Sintered chip groove T 51 Right / left 1 R A U 3 0 Indexable insert Introduction Only with cutting edges fitted Chip groove Assembly Cutting edge design Code letter Code letter Design Code letter Design 0A 1R 2R Fitted on one side U 01 99 Chip groove finishing 1L A 2L 5L 6L One corner or one cutting edge M 01 99 Chip groove semi R 01 99 Chip groove roughing 75

Tools with ISO elements Indexable inserts Cutting material overview Cutting material overview Cutting material Cutting material code Coating composition Coating colour Milling Turning Boring Reaming Recommended application Cermet CVD coated CC111 Al 2 O 3 Black Finest grain Cermet grade with Al 2 O 3 coating with the emphasis on finishing and semi-machining of steel and cast iron materials with elevated cutting speeds. CP130 TiAlN Blackanthracite Ultra-fine grain Cermet grade with TiAlN coating for finish machining steel and stainless steel with low to medium tensile strengths. CP131 AlTiN Blackanthracite Ultra-fine grain Cermet grade with AlTiN coating for finishing machining steel and stainless steel with medium to high tensile strengths, as well as grey cast iron and spheroidal graphite cast iron up to 500 N/mm 2. Cermet PVD coated CP871 AlTiN Black-red Ultra-fine grain Cermet with extremely heat-resistant PVD coating with excellent wear resistance and improved ductility for finishing steel and stainless steel. In case of stable conditions and high requirements on surface quality. CP872 AlTiN Black-red Ultra-fine grain Cermet with extremely heat-resistant PVD coating with a very balanced relationship between wear resistance and ductility for finishing and medium machining of steel and stainless steel. In case of slightly unstable conditions and slightly interrupted cuts. PcBN FU430 PcBN grade with high CBN-content for finishing and semi-finishing grey cast iron and sintered metal. HC840 TiCN+ Al 2 O 3 Black-grey Finest grain carbide with high wear resistance and a multi-layer CVD coating comprising TiCN with Al 2 O 3 function coating for finishing grey cast iron and spheroidal graphite cast iron at high cutting speeds. For smoother to slightly interrupted cut. HC841 TiCN+ Al 2 O 3 Black-grey Fine grain carbide with a multi-layer CVD coating made of TiCN and an Al 2 O 3 function coating. First choice for machining grey cast iron and spheroidal graphite cast iron with slightly to heavily interrupted cut. Carbide CVD coated HC851 HC852 TiCN+ Al 2 O 3 + TiN TiCN+ Al 2 O 3 + TiN Gold Gold Wear-free P substrate with a wear-resistant, multi-layer CVD coating made of TiCN, an Al 2 O 3 function coating and a very smooth TiN top coating. Finishing steel at high cutting speeds and smooth to slightly interrupted cut. P substrate with a good mixture of wear resistance and ductility, as well as a multi-layer CVD coating made of TiCN, an Al 2 O 3 function coating and a very smooth TiN top coating. General machining of steel with slightly to heavily interrupted cut and also high stock removal. HC861 TiCN+ Al 2 O 3 + TiN Gold Wear-resistant substrate with a multi-layer CVD coating made of TiCN, an Al 2 O 3 function coating and a very smooth TiN top coating. Specially for machining stainless steel with smooth to slightly interrupted cut. HC862 TiCN+ Al 2 O 3 + TiN Gold Carbide substrate with a good mixture of wear resistance and ductility, as well as a multilayer CVD coating made of TiCN, an Al 2 O 3 function coating and a very smooth TiN top coating. Specially for machining stainless steel with slightly to heavily interrupted cut and high stock removal. 76 Applications: Unstable machining / 1st choice General machining / 1st choice Stable machining / 1st choice Unstable machining / 2nd choice General machining / 2nd choice Stable machining / 2nd choice

Tools with ISO elements Indexable inserts Cutting material overview P M K N S Steel Stainless steel Cast iron Non-ferrous metals High temperature alloys and Harder More ductile Harder More ductile Harder More ductile Harder More ductile Harder titanium alloys 05 15 25 35 45 05 15 25 35 45 05 15 25 35 45 05 15 25 35 45 05 15 25 35 45 01 10 20 30 40 50 01 10 20 30 40 50 01 10 20 30 40 50 01 10 20 30 40 50 01 10 20 30 40 50 More ductile Indexable insert Introduction 77

Tools with ISO elements Indexable inserts Cutting material overview Cutting material overview Cutting material Cutting material code Coating composition Coating colour Milling Turning Boring Reaming Recommended application HP118 AlTiN Blackanthracite Ductile finest grain carbide with PVD coating. Universal grade for turning and boring in the area of light to medium machining with interrupted cuts or in case of unstable conditions. Suitable for wet or dry machining. HP122 TiAlN Blackanthracite Wear-resistant finest grain carbide with PVD coating. Specially for fine machining steel and stainless steel with low and medium tensile strengths. HP141 AlTiN Blackanthracite Wear-resistant finest grain carbide with PVD coating. Specially for fine machining steel and stainless steel with higher tensile strengths as well as grey cast iron and spheroidal graphite cast iron. Suitable for wet or dry machining. HP182 TiAlN Blackanthracite Ductile finest grain carbide with PVD top coating. For boring in the area of roughing to semifinish machining with interrupted cuts or in case of unstable conditions. For steel and stainless steel with low to medium tensile strengths. Suitable for wet or dry machining. HP350 AlTiCrN Blackanthracite Ductile finest grain carbide with PVD top coating. Universal grade for milling and boring in the area of roughing to semi-finish machining with interrupted cuts or in case of unstable conditions. First choice for boring high strength steel and stainless steel with tangential inserts, as well as 1st choice for milling grey cast iron and spheroidal graphite cast iron using tangential inserts. Suitable for wet or dry machining. Carbide PVD coated HP382 HP454 TiAlN AlTiN Blackanthracite Blackanthracite Ductile finest grain carbide with PVD coating. For milling and boring in the area of roughing to semi-finish machining with interrupted cuts or in case of unstable conditions. For steel and stainless steel with low to medium tensile strengths. Suitable for wet or dry machining. Fine grain carbide with PVD coating. Universal grade for boring and reaming in the area of fine machining with low cutting depths also suitable for slightly interrupted cuts. HP455 AlTiCrN Blackanthracite Fine grain carbide with PVD top coating. Universal grade for boring in the area of semi-finish machining and roughing. Suitable for wet or dry machining. First choice for grey cast iron and spheroidal graphite cast iron machining using tangential inserts. HP615 TiB2 Silver-grey Fine grain carbide with a special PVD coating for machining adhesive materials. First choice for increasing tool life compared to uncoated cutting edges in aluminium alloys with 7-12 % Si as well as titanium. HP718 TiB2 Silver-grey Ductile finest grain carbide with a special PVD coating for machining adhesive materials in case of unstable conditions and significantly interrupted cuts. First choice for increasing tool life compared to uncoated cutting edges in aluminium alloys with 7-12 % Si as well as titanium. Ductile fine grain carbide with a very heat-resistant PVD coating for milling steel of any type. HP883 TiAlN+TiN Gold HP890 TiAlN Blue-violet Ductile fine grain carbide with PVD coating for milling grey cast iron, spheroidal graphite cast iron and titanium alloys. 78 Applications: Unstable machining / 1st choice General machining / 1st choice Stable machining / 1st choice Unstable machining / 2nd choice General machining / 2nd choice Stable machining / 2nd choice

Tools with ISO elements Indexable inserts Cutting material overview P M K N S Steel Stainless steel Cast iron Non-ferrous metals High temperature alloys and Harder More ductile Harder More ductile Harder More ductile Harder More ductile Harder titanium alloys 05 15 25 35 45 05 15 25 35 45 05 15 25 35 45 05 15 25 35 45 05 15 25 35 45 01 10 20 30 40 50 01 10 20 30 40 50 01 10 20 30 40 50 01 10 20 30 40 50 01 10 20 30 40 50 More ductile Indexable insert Introduction 79

Tools with ISO elements Indexable inserts Cutting material overview Cutting material overview Cutting material Cutting material code Coating composition Coating colour Milling Turning Boring Reaming Recommended application HU615 Fine grain carbide with very smooth surface for general machining of aluminium wrought alloy and aluminium cast alloys with Si content < 7 %, as well as titanium alloys with lower cutting speeds. Carbide Uncoated HU810 Fine grain carbide with very smooth surface for machining aluminium wrought alloy and aluminium cast alloys with Si content < 7 %, as well as titanium alloys with lower cutting speeds in case of stable cutting conditions. HU825 Fine grain carbide with very smooth surface for milling aluminium wrought alloy and aluminium cast alloys with Si content < 7 %, as well as titanium alloys with lower cutting speeds in case of interrupted cuts. Ceramic KU450 The universal silicon nitride ceramic grade for machining grey cast iron workpiece materials in a particularly wide range of applications from roughing to semi-finish machining as well as with smooth or slightly interrupted cuts. PU617 PCD grade with medium particle size for roughing to semi-finish machining in non-ferrous metals and for machining very abrasive materials. PCD Fine grain PCD grade for finishing non-ferrous metals. PU620 Applications: Unstable machining / 1st choice General machining / 1st choice Stable machining / 1st choice Unstable machining / 2nd choice General machining / 2nd choice Stable machining / 2nd choice 80

Tools with ISO elements Indexable inserts Cutting material overview P M K N S Steel Stainless steel Cast iron Non-ferrous metals High temperature alloys and Harder More ductile Harder More ductile Harder More ductile Harder More ductile Harder titanium alloys 05 15 25 35 45 05 15 25 35 45 05 15 25 35 45 05 15 25 35 45 05 15 25 35 45 01 10 20 30 40 50 01 10 20 30 40 50 01 10 20 30 40 50 01 10 20 30 40 50 01 10 20 30 40 50 More ductile Indexable insert Introduction 81

Tools with ISO elements Indexable inserts Chip breaker forms overview Overview of chip breaker forms boring Tangential indexable inserts Type ISO 513 Edge rounding Diagram A54 5 15 P M K +++ a p 5 4 3 2 N 1 S 0 0 0,1 0,2 0,3 0,4 f (mm/z) A81 14 P M K + a p 5 4 3 2 N 1 Roughing D80 15-20 S P M K + 0 0 0,1 0,2 0,3 0,4 f (mm/z) a p 5 4 3 2 N 1 S 0 0 0,1 0,2 0,3 0,4 f (mm/z) H03 18 8 P M K +++ a p 5 4 3 2 N 1 0 0 0,1 0,2 0,3 0,4 f (mm/z) A31 18 P M K + a p 5 4 3 2 N 1 Medium machining roughing A32 18 A80 14 S P M K N S P M K ++ 0 0 0 0,1 0,2 0,3 0,4 f (mm/z) a p 5 4 3 2 1 0 0 0,1 0,2 0,3 0,4 f (mm/z) a p 5 4 3 2 N 1 S 0 0 0,1 0,2 0,3 0,4 f (mm/z) 82

Tools with ISO elements Indexable inserts Chip breaker forms overview 0 = Sharp edged + = Slightly rounded ++ = Medium rounded +++ = Heavily rounded Type ISO 513 Edge rounding Diagram A30 18 P M K 0 a p 5 4 3 2 N 1 S 0 0 0,1 0,2 0,3 0,4 f (mm/z) A50 13 P M K +++ a p 5 4 3 2 N 1 S 0 0 0,1 0,2 0,3 0,4 f (mm/z) Medium machining A56 20 P M K N S +++ a p 5 4 3 2 1 0 0 0,1 0,2 0,3 0,4 f (mm/z) A79 8 P M K 0 a p 5 4 3 2 N 1 A88 8 S P M K + 0 0 0,1 0,2 0,3 0,4 f (mm/z) a p 5 4 3 2 Indexable insert Boring N 1 S 0 0 0,1 0,2 0,3 0,4 f (mm/z) 83

Tools with ISO elements Indexable inserts Chip guiding stage overview Overview of chip breaker forms boring Tangential indexable inserts Type ISO 513 Edge rounding Diagram C00 6 P M K 0 a p 5 4 3 2 N 1 S 0 0 0,1 0,2 0,3 0,4 f (mm/z) Finishing C60 0 P M K N 0 a p 5 4 3 2 1 S 0 0 0,1 0,2 0,3 0,4 f (mm/z) C61 0 P M K 0 a p 5 4 3 2 N 1 S 0 0 0,1 0,2 0,3 0,4 f (mm/z) D00 P 0-15 - 20 M K N 0 a p is dependent on indexable insert type f z = 0,05-0.3 S D01 P Of universal application D02 0-15 - 20 15-20 M K N S P M K N + ++ a p is dependent on indexable insert type f z = 0,05-0.3 a p is dependent on indexable insert type f z = 0,08-0.3 S D03 P 15-20 M K N +++ a p is dependent on indexable insert type f z = 0.01-0.3 84

Tools with ISO elements Indexable inserts Chip breaker forms overview Overview of chip breaker forms boring Radial indexable inserts 0 = Sharp edged + = Slightly rounded ++ = Medium rounded +++ = Heavily rounded Type ISO 513 Edge rounding Diagram Medium machining roughing R30 6 0.2 P M K N S +++ a p 5 4 3 2 1 0 0 0,1 0,2 0,3 0,4 f (mm/z) 0A* P M 0 K N + ++ a p 5 4 3 2 1 S 0 0 0,1 0,2 0,3 0,4 f (mm/z) 0AA* 0 P M K N S 0 + ++ +++ a p 5 4 3 2 1 0 0 0,1 0,2 0,3 0,4 f (mm/z) Medium machining finishing 1L* P M 10 K N S 1R* P M 15 K N + ++ 0 + a p 5 4 3 2 1 0 0 0,1 0,2 0,3 0,4 f (mm/z) a p 5 4 3 2 1 Indexable insert Boring S 0 0 0,1 0,2 0,3 0,4 f (mm/z) 2L* P M 10 K N + ++ a p 5 4 3 2 1 S 0 0 0,1 0,2 0,3 0,4 f (mm/z) 6LA 10 P M K 0 a p 5 4 3 2 N 1 S 0 0 0,1 0,2 0,3 0,4 f (mm/z) * This chip breaker form is available with different edge rounding. 85

Tools with ISO elements Indexable inserts Chip breaker forms overview Overview of chip breaker forms boring Radial indexable inserts Type ISO 513 Edge rounding Diagram 2R* P 15 M K N 0 + a p 5 4 3 2 1 S 0 0 0,1 0,2 0,3 0,4 f (mm/z) 5 M30 0.2 15 P M K ++ a p 5 4 3 2 N 1 Medium machining finishing M31 17 M32 0.1 25 S P M K N S P M K ++ ++ 0 0 0,1 0,2 0,3 0,4 f (mm/z) a p 5 4 3 2 1 0 0 0,1 0,2 0,3 0,4 f (mm/z) a p 5 4 3 2 N 1 S 0 0 0,1 0,2 0,3 0,4 f (mm/z) U31 7 0 0.2 Section through radius Section through main cutting edge P M K N S ++ a p 5 4 3 2 1 0 0 0,1 0,2 0,3 0,4 f (mm/z) * This chip breaker form is available with different edge rounding. 86

Tools with ISO elements Indexable inserts Chip breaker forms overview 0 = Sharp edged + = Slightly rounded ++ = Medium rounded +++ = Heavily rounded Type ISO 513 Edge rounding Diagram 5LA 10 P M K 0 a p 5 4 3 2 N 1 S 0 0 0,1 0,2 0,3 0,4 f (mm/z) Finishing U19 5 7 U24 5 7 Section through radius Section through main cutting edge Section through radius Section through main cutting edge P M K N S P M K N S + ++ a p 5 4 3 2 1 0 0 0,1 0,2 0,3 0,4 f (mm/z) a p 5 4 3 2 1 0 0 0,1 0,2 0,3 0,4 f (mm/z) U30 20 P M K ++ a p 5 4 3 2 N 1 S 0 0 0,1 0,2 0,3 0,4 f (mm/z) Indexable insert Boring 87

Tools with ISO elements Indexable inserts Boring Tangential indexable inserts, two-cutting edges CTHD Boring without arc shaped land Tipped variant one-cutting edge Carbide PCD P M K N S N Roughing Cutting material Cutting edge design D03 D03 D01 D02 D80 from ø 28 mm a p (mm) CTHD 060304...L- 1,5-3 CTHD 060304...R- 1,5-3 CTHD 060308...L- 1,5-3 CTHD 060308...R- 1,5-3 from ø 41 mm CTHD 09T304...L- 1,5-4 CTHD 09T304...R- 1,5-4 CTHD 09T308...L- 1,5-4 CTHD 09T308...R- 1,5-4 CTHD 09T312...L- 1,5-4 CTHD 09T312...R- 1,5-4 from ø 54 mm CTHD 120404...L- 1,5-5 CTHD 120404...R- 1,5-5 CTHD 120408...L- 1,5-5 CTHD 120408...R- 1,5-5 CTHD 120412...L- 1,5-5 CTHD 120412...R- 1,5-5 HP455 HP350 HU615 HP615 PU617 Note: For general figures for the minimum boring diameter in connection with the number of teeth see section Technical appendix page 179. For clamping screws and screwdriver for indexable inserts see section Accessories page 167. Ordering example: On ordering please add the selected cutting edge design and the cutting material to the designation key. CTHD090304D03L-HP455 Cutting rate see page 184. Available from stock in Germany. Standard insert not carried in stock. (Delivery time upon request). 88

Tools with ISO elements Indexable inserts Boring Tangential indexable inserts, two-cutting edges CTHD Boring without arc shaped land Carbide P M K N S Medium machining Cutting material Cutting edge design D02 D02 D00 D01 from ø 28 mm a p (mm) CTHD 060304...L- 1,5-3 CTHD 060304...R- 1,5-3 CTHD 060308...L- 1,5-3 CTHD 060308...R- 1,5-3 from ø 41 mm CTHD 09T304...L- 1,5-4 CTHD 09T304...R- 1,5-4 CTHD 09T308...L- 1,5-4 CTHD 09T308...R- 1,5-4 CTHD 09T312...L- 1,5-4 CTHD 09T312...R- 1,5-4 from ø 54 mm CTHD 120404...L- 1,5-5 CTHD 120404...R- 1,5-5 CTHD 120408...L- 1,5-5 CTHD 120408...R- 1,5-5 CTHD 120412...L- 1,5-5 CTHD 120412...R- 1,5-5 HP455 HP350 HU615 HP615 Indexable insert Boring Note: For general figures for the minimum boring diameter in connection with the number of teeth see section Technical appendix page 179. For clamping screws and screwdriver for indexable inserts see section Accessories page 167. Ordering example: On ordering please add the selected cutting edge design and the cutting material to the model. CTHD060304D02L-HP455 Cutting rate see page 184. Available from stock in Germany. Standard insert not carried in stock. (Delivery time upon request). 89

Tools with ISO elements Indexable inserts Boring Tangential indexable inserts, four-cutting edges BS L00 CTHQ Boring blind bore with arc shaped land Tipped variant one-cutting edge Carbide PcBN PCD P M K N S K N Roughing Medium machining HP182 HP382 HP382 HP118 Cutting material Cutting edge design A54 A54 A32 A32 H03 H03 A31 A32 A81 A80 from ø 40 mm a p (mm) CTHQ 060408...L00B021-... 1,0-2,5 from ø 65 mm CTHQ 090508...L00B041-... 1,5-3 1,5-4 CTHQ 090512...L00B041-... 1,5-3 1,5-4 from ø 78 mm CTHQ 120608...L00B081-... 1,5-3 1,5-5 CTHQ 120612...L00B081-... 1,5-3 1,5-5 Cutting edge design A50 A50 A56 A56 A32 A32 A30 A31 A31 A88 A79 A80 from ø 40 mm a p (mm) CTHQ 060404...L00B021-... 0,5-2 CTHQ 060408...L00B021-... 0,5-2 from ø 65 mm CTHQ 090504...L00B041-... 0,5-2 CTHQ 090508...L00B041-... 0,5-2 CTHQ 090512...L00B041-... 0,5-2 from ø 78 mm CTHQ 120604...L.00B081-... 0,5-2 CTHQ 120608...L.00B081-... 0,5-2 CTHQ 120612...L00B081-... 0,5-2 HP455 HP350 HU615 HP615 HP718 FU430 PU617 PU617 Right handed design on request. Note: For general figures for the minimum boring diameter in connection with the number of teeth see section Technical appendix page 179. For clamping screws and screwdriver for indexable inserts see section Accessories page 167. Ordering example: On ordering please add the selected cutting edge design and the cutting material to the designation key. CTHQ060408A54L00B016-HP182 Cutting rate see page 184. Available from stock in Germany. Standard insert not carried in stock. (Delivery time upon request). 90

Tools with ISO elements Indexable inserts Boring Tangential indexable inserts, four-cutting edges BS L10 CTHQ Boring through bore with arc shaped land Tipped variant one-cutting edge Carbide PcBN PCD P M K N S K N Roughing HP182 HP382 HP382 HP118 Cutting material Cutting edge design A54 A54 A32 A32 H03 H03 A31 A32 A81 A80 from ø 40 mm a p (mm) CTHQ 060408...L10B021-... 1,0-2,5 from ø 65 mm CTHQ 090508...L10B041-... 1,5-3 1,5-4 from ø 78 mm CTHQ 120608...L10B081-1,5-3 1,5-5 HP455 HP350 HU615 HP615 HP718 FU430 PU617 PU617 Medium machining Cutting edge design A50 A50 A56 A56 A32 A32 A30 A31 A31 A88 A79 A80 from ø 40 mm a p (mm) CTHQ 060404...L10B021-... 0,5-2 CTHQ 060408...L10B021-... 0,5-2 from ø 65 mm CTHQ 090504...L10B041-... 0,5-2 CTHQ 090508...L10B041-... 0,5-2 from ø 78 mm CTHQ 120604...L10B081-0,5-2 CTHQ 120608...L10B081-0,5-2 Indexable insert Boring Right design on request. Note: For general figures for the minimum boring diameter in connection with the number of teeth see section Technical appendix page 179. For clamping screws and screwdriver for indexable inserts see section Accessories page 167. Ordering example: On ordering please add the selected cutting edge design and the cutting material to the designation key. CTHQ060408A54L10B016-HP182 Cutting rate see page 184. Available from stock in Germany. Standard insert not carried in stock. (Delivery time upon request). 91

Tools with ISO elements Indexable inserts Boring Tangential indexable inserts, four-cutting edges CTHQ Boring neutral without arc shaped land Tipped variant one-cutting edge Carbide PcBN PCD P M K N S K N Roughing Medium machining HP182 HP382 HP382 HP118 Cutting material Cutting edge design A54 A54 A32 A32 H03 H03 A31 A32 A81 A80 from ø 28 mm a p (mm) CTHQ 060408...L-... 1,0-2,5 CTHQ 060408...R-... 1,0-2,5 from ø 41 mm CTHQ 090508...L-... 1,5-3 1,5-4 CTHQ 090508...R-... 1,5-3 1,5-4 from ø 54 mm CTHQ 120608...L- 1,5-3 1,5-5 CTHQ 120608...R-... 1,5-3 1,5-5 Cutting edge design A50 A50 A56 A56 A32 A32 A30 A31 A31 A88 A79 A80 from ø 28 mm a p (mm) CTHQ 060404...L-... 0,5-2 CTHQ 060404...R-... 0,5-2 from ø 41 mm CTHQ 090504...L-... 0,5-2 CTHQ 090504...R-... 0,5-2 CTHQ 090508...L-... 0,5-2 CTHQ 090508...R- 0,5-2 from ø 54 mm CTHQ 120604...L-... 0,5-2 CTHQ 120604...R- 0,5-2 HP455 HP350 HU615 HP615 HP718 FU430 PU617 PU617 Note: For general figures for the minimum boring diameter in connection with the number of teeth see section Technical appendix page 179. For clamping screws and screwdriver for indexable inserts see section Accessories page 167. Ordering example: On ordering please add the selected cutting edge design and the cutting material to the designation key. CTHQ060408A54L-HP182 Cutting rate see page 184. Available from stock in Germany. Standard insert not carried in stock. (Delivery time upon request). 92

Tools with ISO elements Indexable inserts Boring Tangential indexable inserts, four-cutting edges BS L00 FTHQ Boring blind bore with arc shaped land Tipped variant one-cutting edge Roughing from ø 30 mm FTHQ 090508...L00B016-... FTHQ 090512...L00B016-... from ø 40 mm FTHQ 120608...L00B021-... FTHQ 120612...L00B021-... HP182 Carbide PcBN PCD P M K N S K N HP382 HP382 HP118 HP455 HP350 Cutting material Cutting edge design A54 A54 A32 A32 H03 H03 A31 A32 A81 A80 a p (mm) 1,5-3 1,5-4 1,5-3 1,5-4 1,5-3 1,5-5 1,5-3 1,5-5 HU615 HP615 HP718 FU430 PU617 PU617 Medium machining Cutting edge design A50 A50 A56 A56 A32 A32 A30 A31 A31 A88 A79 A80 from ø 22 mm a p (mm) FTHQ 060404...L00B012-... 0,5-1,5 FTHQ 060408...L00B012-... 0,5-1,5 from ø 30 mm FTHQ 090504...L00B016-... 0,5-2 FTHQ 090508...L00B016-... 0,5-2 from ø 40 mm FTHQ 120604...L00B021-... 0,5-2 FTHQ 120608...L00B021-... 0,5-2 FTHQ 120612...L00B021-... 0,5-2 Indexable insert Boring Right handed design on request. Note: For general figures for the minimum boring diameter in connection with the number of teeth see section Technical appendix page 179. For clamping screws and screwdriver for indexable inserts see section Accessories page 167. Ordering example: On ordering please add the selected cutting edge design and the cutting material to the designation key. FTHQ060408A54L00B012-HP182 Cutting rate see page 184. Available from stock in Germany. Standard insert not carried in stock. (Delivery time upon request). 93

Tools with ISO elements Indexable inserts Boring Tangential indexable inserts, four-cutting edges BS L10 FTHQ Boring through bore with arc shaped land Tipped variant one-cutting edge Roughing from ø 30 mm FTHQ 090508...L10B016-... from ø 40 mm FTHQ 120608...L10B021-... HP182 Carbide PcBN PCD P M K N S K N HP382 HP382 HP118 HP455 HP350 Cutting material Cutting edge design A54 A54 A32 A32 H03 H03 A31 A32 A81 A80 a p (mm) 1,5-3 1,5-4 1,5-3 1,5-5 HU615 HP615 HP718 FU430 PU617 PU617 Medium machining Cutting edge design A50 A50 A56 A56 A32 A32 A30 A31 A31 A88 A79 A80 from ø 22 mm a p (mm) FTHQ 060404...L10B012-... 0,5-1,5 FTHQ 060408...L10B012-... 0,5-1,5 from ø 30 mm FTHQ 090504...L10B016-... 0,5-2 FTHQ 090508...L10B016-... 0,5-2 from ø 40 mm FTHQ 120604...L10B021-... 0,5-2 FTHQ 120608...L10B021-... 0,5-2 Right handed design on request. Note: For general figures for the minimum boring diameter in connection with the number of teeth see section Technical appendix page 179. For clamping screws and screwdriver for indexable inserts see section Accessories page 167. Ordering example: On ordering please add the selected cutting edge design and the cutting material to the designation key. FTHQ060408A54L10B012-HP182 Cutting rate see page 184. Available from stock in Germany. Standard insert not carried in stock. (Delivery time upon request). 94

Tools with ISO elements Indexable inserts Boring Tangential indexable inserts, four-cutting edges FTHQ Boring neutral without arc shaped land Tipped variant one-cutting edge Roughing from ø 30 mm FTHQ 090508...L-... FTHQ 090508...R-... from ø 40 mm FTHQ 120608...L-... FTHQ 120608...R-... HP182 Carbide PcBN PCD P M K N S K N HP382 HP382 HP118 HP455 HP350 Cutting material Cutting edge design A54 A54 A32 A32 H03 H03 A31 A32 A81 A80 a p (mm) 1,5-3 1,5-4 1,5-3 1,5-4 1,5-3 1,5-5 1,5-3 1,5-5 HU615 HP615 HP718 FU430 PU617 PU617 Medium machining Cutting edge design A50 A50 A56 A56 A32 A32 A30 A31 A31 A88 A79 A80 from ø 22 mm a p (mm) FTHQ 060404...L-... 0,5-1,5 FTHQ 060404...R-... 0,5-1,5 FTHQ 060408...L-... 0,5-1,5 FTHQ 060408...R-... 0,5-1,5 from ø 30 mm FTHQ 090504...L-... 0,5-2 FTHQ 090504...R-... 0,5-2 FTHQ 090508...L-... 0,5-2 FTHQ 090508...R-... 0,5-2 from ø 40 mm FTHQ 120604...L-... 0,5-2 FTHQ 120604...R-... 0,5-2 FTHQ 120608...L-... 0,5-2 Indexable insert Boring Note: For general figures for the minimum boring diameter in connection with the number of teeth see section Technical appendix page 179. For clamping screws and screwdriver for indexable inserts see section Accessories page 167. Ordering example: On ordering please add the selected cutting edge design and the cutting material to the designation key. FTHQ060408A54L-HP182 Cutting rate see page 184. Available from stock in Germany. Standard insert not carried in stock. (Delivery time upon request). 95

Tools with ISO elements Indexable inserts Boring Tangential indexable inserts, two-cutting edges FTHW Fine boring with arc shaped land not face cutting Tipped variant one-cutting edge Carbide Cermet PcBN PCD P M K N S P K K N Cutting material HP122 HP141 HP141 HP122 HP141 HP454 HU615 HP615 CP130 CP131 FU430 PU620 Finishing from ø 60 mm a p (mm) FTHW 0905MGC00L00B030-0,1-0,5 FTHW 0905MCC00L00B030-0,1-0,5 FTHW 0905MAD00L00B030-0,1-0,5 FTHW 0905MGD01L00B030-0,1-0,5 FTHW 0905MCD01L00B030-0,1-0,5 FTHW 0905MCD00L00B030-0,1-0,5 FTHW 0905MAC60L00B030-0,1-0,5 FTHW 0905MCC61L00B030-0,1-0,5 from ø 120 mm FTHW 0905MGC00L00B060-0,1-0,5 FTHW 0905MCC00L00B060-0,1-0,5 FTHW 0905MAD00L00B060-0,1-0,5 FTHW 0905MGD01L00B060-0,1-0,5 FTHW 0905MCD01L00B060-0,1-0,5 FTHW 0905MCD00L00B060-0,1-0,5 FTHW 0905MAC60L00B060-0,1-0,5 FTHW 0905MCC61L00B060-0,1-0,5 from ø 180 mm FTHW 0905MGC00L00B090-0,1-0,5 FTHW 0905MCC00L00B090-0,1-0,5 FTHW 0905MAD00L00B090-0,1-0,5 FTHW 0905MGD01L00B090-0,1-0,5 FTHW 0905MCD01L00B090-0,1-0,5 FTHW 0905MCD00L00B090-0,1-0,5 FTHW 0905MAC60L00B090-0,1-0,5 FTHW 0905MCC61L00B090-0,1-0,5 Right handed design on request. Note: The minimum boring diameter is dependent on the arc shaped land design. For clamping screws and screwdriver for indexable inserts see section Accessories page 167. Ordering example: On ordering please add the selected cutting material to the designation key. FTHW0905MGC00L00B030-HP122 Cutting rate see page 187. Available from stock in Germany. Standard insert not carried in stock. (Delivery time upon request). 96

Tools with ISO elements Indexable inserts Boring Tangential indexable inserts, four-cutting edges STHD - STHE Chamfering Tipped variant one-cutting edge Carbide PCD P M K N S N Chamfering HP455 Cutting material Cutting edge design D02 D02 D02 D00 D80 a p (mm) STHD 060300...N- 0,1-4,2 STHE 060300...N- 0,1-4,2 STHD 09T300...N- 0,1-6,3 STHE 09T300...N- 0,1-6,3 HP455 HP455 HU615 PU617 Indexable insert Boring Note: General figures for the minimum boring diameter in connection with the installation situation. For clamping screws and screwdriver for indexable inserts see section Accessories page 167. Ordering example: On ordering please add the selected cutting edge design and the cutting material to the designation key. STHD060300D02N-HP455 Cutting rate see page 184. Available from stock in Germany. Standard insert not carried in stock. (Delivery time upon request). 97

Tools with ISO elements Indexable inserts Boring Tangential indexable inserts, six-cutting edges BS L00 WTHQ Boring blind bore with arc shaped land Tipped variant one-cutting edge Carbide Ceramic PcBN PCD P M K N S K K N Roughing Medium machining HP182 HP382 HP382 HP118 Cutting material Cutting edge design A54 A54 A32 A32 H03 H03 A31 A32 H03 A80 from ø 37 mm a p (mm) WTHQ 070504...L00B026-... 1,5-3 WTHQ 070508...L00B026-... 1,5-3 from ø 59,5 mm WTHQ 090604...L00B041-... 1,5-3 1,5-5 WTHQ 090608...L00B041-... 1,5-3 1,5-5 from ø 159.5 mm WTHQ 090604...L00B081-1,5-3 1,5-5 WTHQ 090608...L00B081-1,5-3 1,5-5 Cutting edge design A50 A50 A56 A56 A32 A32 A30 A31 A31 A88 A79 A80 from ø 37 mm a p (mm) WTHQ 070504...L00B026-... 0,5-2 WTHQ 070508...L00B026... 0,5-2 from ø 59,5 mm WTHQ 090604...L00B041-... 0,5-2 WTHQ 090608...L00B041-... 0,5-2 from ø 159.5 mm WTHQ 090604...L00B081-0,5-2 WTHQ 090608...L00B081-0,5-2 HP455 HP350 HU615 HP615 HP718 KU450 FU430 PU617 PU617 Right handed design on request. Note: For general figures for the minimum boring diameter in connection with the number of teeth see section Technical appendix page 179. For clamping screws and screwdriver for indexable inserts see section Accessories page 167. Ordering example: On ordering please add the selected cutting edge design and the cutting material to the designation key. WTHQ070504A54L00B026-HP182 Cutting rate see page 186. Available from stock in Germany. Standard insert not carried in stock. (Delivery time upon request). 98

Tools with ISO elements Indexable inserts Boring Tangential indexable inserts, six-cutting edges BS L10 WTHQ Boring through bore with arc shaped land Tipped variant one-cutting edge HP182 Carbide Ceramic PcBN PCD P M K N S K K N HP382 HP382 HP118 Cutting material Cutting edge design A54 A54 A32 A32 H03 H03 A31 A32 H03 A80 a p (mm) WTHQ 070504...L10B026-... 1,5-3 WTHQ 070508...L10B026-... 1,5-3 HP455 HP350 HU615 HP615 HP718 KU450 FU430 PU617 PU617 WTHQ 090604...L10B041-... WTHQ 090608...L10B041-... WTHQ 090604...L10B081- WTHQ 090608...L10B081-1,5-3 1,5-5 1,5-3 1,5-5 1,5-3 1,5-5 1,5-3 1,5-5 A50 A50 A56 A56 A32 A32 A30 A31 A31 A88 A79 A80 a p (mm) WTHQ 070504...L10B026-... 0,5-2 WTHQ 070508...L10B026-... 0,5-2 WTHQ 090604...L10B041-... 0,5-2 WTHQ 090608...L10B041-... 0,5-2 Indexable insert Boring WTHQ 090604...L10B081-0,5-2 WTHQ 090608...L10B081-0,5-2 Right handed design on request. Note: For general figures for the minimum boring diameter in connection with the number of teeth see section Technical appendix page 179. For clamping screws and screwdriver for indexable inserts see section Accessories page 167. Ordering example: On ordering please add the selected cutting edge design and the cutting material to the designation key. WTHQ070504A54L10B026-HP182 Cutting rate see page 186. Available from stock in Germany. Standard insert not carried in stock. (Delivery time upon request). 99

Tools with ISO elements Indexable inserts Boring Tangential indexable inserts, six-cutting edges WTHQ Boring neutral without arc shaped land Tipped variant one-cutting edge Carbide Ceramic PcBN PCD P M K N S K K N Roughing Medium machining HP182 HP382 HP382 HP118 Cutting material Cutting edge design A54 A54 A32 A32 H03 H03 A31 A32 H03 A80 from ø 37 a p (mm) WTHQ 070504...L-... 1,5-3 WTHQ 070504...R-... 1,5-3 WTHQ 070508 L-... 1,5-3 WTHQ 070508...R-... 1,5-3 from ø 59.5 WTHQ 090604...L-... 1,5-3 1,5-5 WTHQ 090604...R-... 1,5-3 1,5-5 WTHQ 090608...L- 1,5-3 1,5-5 WTHQ 090608...R-... 1,5-3 1,5-5 Cutting edge design A50 A50 A56 A56 A32 A32 A30 A31 A31 A88 A79 A80 from ø 37 a p (mm) WTHQ 070504...L-... 0,5-2 WTHQ 070504...R-... 0,5-2 WTHQ 070508...L-... 0,5-2 WTHQ 070508...R-... 0,5-2 WTHQ 090604...L-... 0,5-2 WTHQ 090604...R-... 0,5-2 WTHQ 090608...L-... 0,5-2 WTHQ 090608...R-... 0,5-2 HP455 HP350 HU615 HP615 HP718 KU450 FU430 PU617 PU617 Note: For general figures for the minimum boring diameter in connection with the number of teeth see section Technical appendix page 179. For clamping screws and screwdriver for indexable inserts see section Accessories page 167. Ordering example: On ordering please add the selected cutting edge design and the cutting material to the designation key. WTHQ070504A54L-HP182 Cutting rate see page 186. Available from stock in Germany. Standard insert not carried in stock. (Delivery time upon request). 100

Tools with ISO elements Indexable inserts Boring Radial indexable inserts, two-cutting edges CCMT - CCGT Boring Tipped variant one-cutting edge 6LA Carbide PCD P M K N S P N 5LA Cutting material HC851 HC852 HC861 HC862 HC840 HC841 HU810 CP871 CP872 CC111 PU620 Medium mach'g Medium machining - finishing Finishing Medium machining - finishing a p (mm) CCMT 09T308N-R30-... 1,0-4,0 CCMT 120408N-R30-... 1,0-6,0 CCMT 060204N-M31-... 1,0-2,5 CCMT 09T304N-M31-... 1,0-3,0 CCMT 09T308N-M31-... 1,0-3,0 CCMT 120408N-M31-... 1,0-3,0 CCMT 060202N-M30-... 0,25-2,5 CCMT 060204N-M30-... 0,5-2,5 CCMT 09T304N-M30-... 0,5-2,5 CCMT 09T308N-M30-... 0,75-2,5 CCMT 09T304N-U31-... 0,25-2,0 CCMT 09T308N-U31-... 0,5-2,0 CCGT 09T304N-M32-... 0,5-3,0 CCGT 09T308N-M32-... 0,5-3,0 CCGT 060204N-U19-... 0,1-0,5 CCGT 060204N-U24-... 0,2-0,5 CCGT 060204F01L-6LA-... 0,1-3,0 CCGT 060204F01R-6LA-... 0,1-3,0 CCGT 060208F01L-6LA-... 0,1-3,0 CCGT 060208F01R-6LA-... 0,1-3,0 CCGT 09T304F01L-6LA-... 0,1-4,5 CCGT 09T304F01R-6LA-... 0,1-4,5 CCGT 09T308F01L-6LA-... 0,1-4,5 CCGT 09T308F01R-6LA-... 0,1-4,5 Indexable insert Boring Finishing CCGT 060204F01N-5LA-... 0,1-1,0 CCGT 060208F01N-5LA-... 0,1-1,5 CCGT 09T304F01N-5LA-... 0,1-2,0 CCGT 09T308F01N-5LA-... 0,1-2,0 Note: For general figures for the minimum boring diameter in connection with the number of teeth see section Technical appendix page 178. For clamping screws and screwdriver for indexable inserts see section Accessories page 166. Ordering example: On ordering please add the selected cutting material to the designation key. CCMT09T308N-R30-HC851 Cutting rate see page 184. Available from stock in Germany. Standard insert not carried in stock. (Delivery time upon request). 101

Tools with ISO elements Indexable inserts Boring Radial indexable inserts, two-cutting edges CCGW Boring Tipped variant one-cutting edge Carbide PcBN PCD P M K N S K N Cutting material HP455 HP454 HU615 HP615 FU430 PU617 PU620 Medium machining a p (mm) CCGW 060204E04N-0A-... 0,5-3,2 CCGW 060208E04N-0A-... 0,5-3,2 CCGW 09T304E04N-0A-... 0,5-4,0 CCGW 09T308E04N-0A-... 0,5-4,0 CCGW 09T312E04N-0A-... 0,5-4,0 CCGW 060204T51N-0AA-... 0,5-2,0 CCGW 09T304T51N-0AA-... 0,5-2,5 CCGW 09T308T51N-0AA-... 0,5-2,5 CCGW 060204E01N-0AA-... 0,5-1,5 CCGW 09T304E01N-0AA-... 0,5-2,0 CCGW 09T308E01N-0AA-... 0,5-2,0 CCGW 060204E02N-0A-... 0,2-1,0 CCGW 060208E02N-0A-... 0,2-1,0 CCGW 09T304E02N-0A-... 0,2-2,0 CCGW 09T308E02N-0A-... 0,2-2,0 Finishing CCGW 060204E01N-0AA-... 0,1-1,0 CCGW 09T304E01N-0AA-... 0,1-1,0 CCGW 09T308E01N-0AA-... 0,1-1,0 CCGW 060202F01N-0AA-... 0,1-1,0 CCGW 060204F01N-0AA-... 0,1-1,0 CCGW 09T304F01N-0AA-... 0,1-1,0 CCGW 09T308F01N-0AA-... 0,1-1,0 Note: For general figures for the minimum boring diameter in connection with the number of teeth see section Technical appendix page 178. For clamping screws and screwdriver for indexable inserts see section Accessories page 166. Available from stock in Germany. Standard insert not carried in stock. (Delivery time upon request). Ordering example: On ordering please add the selected cutting material to the designation key. CCGW060204E04N-0A-HP455 Cutting rate see page 184. 102

Tools with ISO elements Indexable inserts Boring Radial indexable inserts, two-cutting edges CCHT Boring, left design Carbide P M K N S Cutting material Cutting edge design 1L 1L 1R 1R a p (mm) CCHT 060204E04L-...- 0,5-3,2 CCHT 060208E04L-...- 0,5-3,2 HP455 HP454 HU615 HP615 Medium machining CCHT 09T304E04L-...- 0,5-4,0 CCHT 09T308E04L-...- 0,5-4,0 CCHT 09T312E04L-...- 0,5-4,0 CCHT 120404E04L-...- 0,5-5,0 CCHT 120408E04L-...- 0,5-5,0 CCHT 120412E04L-...- 0,5-5,0 Finishing Cutting edge design 1L 1L 1R 1R a p (mm) CCHT 060204E02L-...- 0,1-1 CCHT 060208E02L-...- 0,1-1 CCHT 060202F01L-...- 0,1-1 CCHT 060204F01L-...- 0,1-1 CCHT 060208F01L-...- 0,1-1 CCHT 09T304E02L-...- 0,1-2 CCHT 09T308E02L-...- 0,1-2 CCHT 09T302F01L-...- 0,1-2 CCHT 09T304F01L-...- 0,1-2 CCHT 09T308F01L-...- 0,1-2 CCHT 09T312F01L-...- 0,1-2 CCHT 120402F01L-...- 0,1-3 CCHT 120404F01L-...- 0,1-3 CCHT 120408F01L-...- 0,1-3 CCHT 120412F01L-...- 0,1-3 Indexable insert Boring Note: For general figures for the minimum boring diameter in connection with the number of teeth see section Technical appendix page 178. For clamping screws and screwdriver for indexable inserts see section Accessories page 166. Ordering example: On ordering please add the selected cutting edge design and the cutting material to the designation key. CCHT060204E04L-1L-HP455 Cutting rate see page 184. Available from stock in Germany. Standard insert not carried in stock. (Delivery time upon request). 103

Tools with ISO elements Indexable inserts Boring Radial indexable inserts, two-cutting edges CCHT Boring, right design Carbide P M K N S Cutting material Cutting edge design 1L 1L 1R 1R a p (mm) CCHT 060204E04R-...- 0,5-3,2 CCHT 060208E04R-...- 0,5-3,2 HP455 HP454 HU615 HP615 Medium machining CCHT 09T304E04R-...- 0,5-4,0 CCHT 09T308E04R-...- 0,5-4,0 CCHT 09T312E04R-...- 0,5-4,0 CCHT 120404E04R-...- 0,5-5,0 CCHT 120408E04R-...- 0,5-5,0 CCHT 120412E04R-...- 0,5-5,0 Cutting edge design 1L 1L 1R 1R a p (mm) CCHT 060204E02R-...- 0,1-1 CCHT 060208E02R-...- 0,1-1 CCHT 060202F01R-...- 0,1-1 CCHT 060204F01R-...- 0,1-1 CCHT 060208F01R-...- 0,1-1 Finishing CCHT 09T304E02R-...- 0,1-2 CCHT 09T308E02R-...- 0,1-2 CCHT 09T302F01R-...- 0,1-2 CCHT 09T304F01R-...- 0,1-2 CCHT 09T308F01R-...- 0,1-2 CCHT 09T312F01R-...- 0,1-2 CCHT 120402F01R-...- 0,1-3 CCHT 120404F01R-...- 0,1-3 CCHT 120408F01R-...- 0,1-3 CCHT 120412F01R-...- 0,1-3 Note: For general figures for the minimum boring diameter in connection with the number of teeth see section Technical appendix page 178. For clamping screws and screwdriver for indexable inserts see section Accessories page 166. Ordering example: On ordering please add the selected cutting edge design and the cutting material to the designation key. CCHT060204E04R-1L-HP455 Cutting rate see page 184. Available from stock in Germany. Standard insert not carried in stock. (Delivery time upon request). 104

Tools with ISO elements Indexable inserts Boring Radial indexable inserts, two-cutting edges DCMT - DCGT - DCGW Boring Tipped variant one-cutting edge Carbide Cermet PcBN PCD P M K N S P K N Cutting material HC851 HC852 HC861 HC862 HC840 HC841 HU810 CP871 CP872 FU430 PU620 Medium machining finishing Finishing a p (mm) DCMT 070204N-M31-... 0,5-2,0 DCMT 070208N-M31-... 0,75-2,0 DCMT 11T302N-M31-... 0,5-3,0 DCMT 11T304N-M31-... 0,5-3,0 DCMT 11T308N-M31-... 0,75-3,0 DCMT 070204N-M30-... 0,5-1,5 DCMT 070208N-M30-... 0,75-1,5 DCMT 11T302N-M30-... 0,5-2,0 DCMT 11T304N-M30-... 0,5-2,0 DCMT 11T308N-M30-... 0,75-2,0 DCMT 070202N-U31-... 0,25-1,5 DCMT 070204N-U31-... 0,25-1,5 DCMT 11T302N-U31-... 0,25-2,0 DCMT 11T304N-U31-... 0,25-2,0 DCMT 11T308N-U31-... 0,5-2,0 DCGT 11T304N-M32-... 0,5-3,0 DCGT 11T308N-M32-... 0,5-3,0 DCMT 070204N-U30-... 0,25-1,0 DCMT 11T302N-U30-... 0,25-1,0 DCMT 11T304N-U30-... 0,25-1,0 DCMT 11T308N-U30-... 0,5-1,0 DCGW11T304E01N-0AA-... 0,1-1,0 DCGW11T308E01N-0AA-... 0,1-1,0 DCGW 11T304F01N-0AA-... 0,1-1,0 DCGW 11T308F01N-0AA-... 0,1-1,0 Indexable insert Boring Note: General figures for the minimum boring diameter in connection with the installation situation. For clamping screws and screwdriver for indexable inserts see section Accessories page 166. Ordering example: On ordering please add the selected cutting material to the designation key. DCMT070204N-M31-HC852 Cutting rate see page 184. Available from stock in Germany. Standard insert not carried in stock. (Delivery time upon request). 105

Tools with ISO elements Indexable inserts Boring Radial indexable inserts, four-cutting edges SCMT - SPMT - SCGT - SPGT Boring Tipped variant one-cutting edge 6LA 5LA Carbide Cermet PCD P M K N S P N Cutting material HC851 HC852 HC861 HC862 HC840 HC841 CP871 CP872 CC111 PU620 Medium Mach Finishing medium machining a p (mm) SCMT 09T308N-R30-... 1,0-4,0 SCMT 120408N-R30-... 1,0-6,0 SPMT 060304N-M30-... 0,5-2,5 SCMT 09T304N-M30-... 0,5-2,5 SCMT 09T308N-M30-... 0,75-2,5 SCMT 120408N-M30-... 0,75-3,0 SPMT 060304N-U30_... 0,25-1,0 SCMT 09T304N-U30-... 0,25-1,0 SCGT 09T304N-U19-... 0,1-0,5 SCGT 09T308N-U19-... 0,1-0,5 SCGT 09T304N-U24-... 0,2-0,5 SCGT 09T308N-U24-... 0,2-0,5 Finishing SPGT 060304F01L-6LA-... 0,1-3,0 SPGT 060304F01R-6LA-... 0,1-3,0 SPGT 060308F01L-6LA-... 0,1-3,0 SPGT 060308F01R-6LA-... 0,1-3,0 SCGT 09T304F01L-6LA-... 0,1-4,5 SCGT 09T304F01R-6LA-... 0,1-4,5 SCGT 09T308F01L-6LA-... 0,1-4,5 SCGT 09T308F01R-6LA-... 0,1-4,5 SPGT 060304F01N-5LA-... 0,1-0,5 SPGT 060308F01N-5LA-... 0,1-0,5 SCGT 09T304F01N-5LA-... 0,1-0,5 SCGT 09T308F01N-5LA-... 0,1-0,5 Note: For general figures for the minimum boring diameter in connection with the number of teeth see section Technical appendix page 178. For clamping screws and screwdriver for indexable inserts see section Accessories page 166. Available from stock in Germany. Standard insert not carried in stock. (Delivery time upon request). Ordering example: On ordering please add the selected cutting material to the designation key. SCMT09T308N-R30-HC851 Cutting rate see page 184. 106

Tools with ISO elements Indexable inserts Boring Radial indexable inserts, four-cutting edges SPGW - SCGW Boring Tipped variant one-cutting edge Carbide PcBN PCD P M K N S K N Cutting material HP455 HP454 FU430 PU617 PU620 a p (mm) SPGW 060304E04N-0A-... 0,5-3,2 SPGW 060308E04N-0A-... 0,5-3,2 Medium machining SCGW 09T304E04N-0A-... 0,5-4,0 SCGW 09T308E04N-0A-... 0,5-4,0 SCGW 120404E04N-0A-... 0,5-5,0 SCGW 120408E04N-0A-... 0,5-5,0 SCGW 09T304T51N-0AA-... 0,5-2,5 SCGW 09T308T51N-0AA-... 0,5-2,5 SCGW 09T304E01N-0AA-... 0,5-2,0 SCGW 09T308E01N-0AA-... 0,5-2,0 Finishing SPGW 060304E02N-0A-... 0,2-1,0 SPGW 060308E02N-0A-... 0,2-1,0 SPGW 060304F01N-0AA-... 0,1-1,0 SPGW 060308F01N-0AA-... 0,1-1,0 SCGW 09T304E02N-0A-... 0,2-2,0 SCGW 09T308E02N-0A-... 0,2-2,0 SCGW 09T304E01N-0AA-... 0,1-1,0 SCGW 09T308E01N-0AA-... 0,1-1,0 SCGW 09T304F01N-0AA-... 0,1-1,0 SCGW 09T308F01N-0AA-... 0,1-1,0 SCGW 120404F01N-0AA-... 0,1-1,0 SCGW 120408F01N-0AA-... 0,1-1,0 Indexable insert Boring Note: For general figures for the minimum boring diameter in connection with the number of teeth see section Technical appendix page 178. For clamping screws and screwdriver for indexable inserts see section Accessories page 166. Available from stock in Germany. Standard insert not carried in stock. (Delivery time upon request). Ordering example: On ordering please add the selected cutting material to the designation key. SPGW060304E04N-0A-HP455 Cutting rate see page 184. 107

Tools with ISO elements Indexable inserts Boring Radial indexable inserts, four-cutting edges SPHT - SCHT Boring, left handed design Carbide P M K N S Cutting material Cutting edge design 2L 2R 2R a p (mm) SPHT 060304E04L-...- 0,5-3,2 SPHT 060308E04L-...- 0,5-3,2 HP455 HP454 HU615 HP615 Medium machining Finishing SCHT 09T304E04L-...- 0,5-4 SCHT 09T308E04L-...- 0,5-4 SCHT 09T312E04L-...- 0,5-4 SCHT 120404E04L-...- 0,5-5 SCHT 120408E04L-...- 0,5-5 SCHT 120412E04L-...- 0,5-5 Cutting edge design 2L 2R 2R a p (mm) SPHT 060304E02L-...- 0,1-1 SPHT 060308E02L-...- 0,1-1 SPHT 060302F01L-...- 0,1-1 SPHT 060304F01L-...- 0,1-1 SPHT 060308F01L-...- 0,1-1 SCHT 09T304E02L-...- 0,1-2 SCHT 09T308E02L-...- 0,1-2 SCHT 09T304F01L-...- 0,1-2 SCHT 09T308F01L-...- 0,1-2 Note: For general figures for the minimum boring diameter in connection with the number of teeth see section Technical appendix page 178. For clamping screws and screwdriver for indexable inserts see section Accessories page 166. Ordering example: On ordering please add the selected cutting edge design and the cutting material to the designation key. SPHT060304E04L-2L-HP455 Cutting rate see page 184. Available from stock in Germany. Standard insert not carried in stock. (Delivery time upon request). 108

Tools with ISO elements Indexable inserts Boring Radial indexable inserts, four-cutting edges SPHT - SCHT Boring, right handed design Carbide P M K N S Cutting material Cutting edge design 2L 2R 2R a p (mm) SPHT 060304E04R-...- 0,5-3,2 SPHT 060308E04R-...- 0,5-3,2 HP455 HP454 HU615 HP615 Medium machining SCHT 09T304E04R-...- 0,5-4 SCHT 09T308E04R-...- 0,5-4 SCHT 09T312E04R-...- 0,5-4 SCHT 120404E04R-...- 0,5-5 SCHT 120408E04R-...- 0,5-5 SCHT 120412E04R-...- 0,5-5 Finishing Cutting edge design 2L 2R 2R a p (mm) SPHT 060304E02R-...- 0,1-1 SPHT 060308E02R-...- 0,1-1 SPHT 060302F01R-...- 0,1-1 SPHT 060304F01R-...- 0,1-1 SPHT 060308F01R-...- 0,1-1 SCHT 09T304E02R-...- 0,1-2 SCHT 09T308E02R-...- 0,1-2 SCHT 09T304F01R-...- 0,1-2 SCHT 09T308F01R-...- 0,1-2 Indexable insert Boring Note: For general figures for the minimum boring diameter in connection with the number of teeth see section Technical appendix page 178. For clamping screws and screwdriver for indexable inserts see section Accessories page 166. Ordering example: On ordering please add the selected cutting edge design and the cutting material to the designation key. SCHT060304E04R-2L-HP455 Cutting rate see page 184. Available from stock in Germany. Standard insert not carried in stock. (Delivery time upon request). 109

Tools with ISO elements Indexable inserts Boring Radial indexable inserts, two-cutting edges SPHT - SCHT Boring Cutting material Cutting edge design 1L 1L 1R 1R a p (mm) SPHT 060304E04X-...- 0,5-3,2 SPHT 060308E04X-...- 0,5-3,2 SCHT 09T304E04X-...- 0,5-4 SCHT 09T308E04X-...- 0,5-4 SCHT 09T312E04X-...- 0,5-4 Carbide P M K N S SCHT 120404E04X-...- 0,5-5 SCHT 120408E04X-...- 0,5-5 SCHT 120412E04X-...- 0,5-5 Cutting edge design 1L 1L 1R 1R a p (mm) SPHT 060304E02X-...- 0,1-1 SPHT 060308E02X-...- 0,1-1 SPHT 060302F01X-...- 0,1-1 SPHT 060304F01X-...- 0,1-1 SPHT 060308F01X-...- 0,1-1 HP455 HP454 HU615 HP615 Finishing SCHT 09T304E02X-...- 0,1-2 SCHT 09T308E02X-...- 0,1-2 SCHT 09T302F01X-...- 0,1-2 SCHT 09T304F01X-...- 0,1-2 SCHT 09T308F01X-...- 0,1-2 SCHT 09T312F01X-...- 0,1-2 SCHT 120404F01X-...- 0,1-3 SCHT 120408F01X-...- 0,1-3 Note: For general figures for the minimum boring diameter in connection with the number of teeth see section Technical appendix page 178. For clamping screws and screwdriver for indexable inserts see section Accessories page 166. Ordering example: On ordering please add the selected cutting edge design and the cutting material to the designation key. SPHT060304E04X-1L-HP455 Cutting rate see page 184. Available from stock in Germany. Standard insert not carried in stock. (Delivery time upon request). 110

Tools with ISO elements Indexable inserts Boring Radial indexable inserts, three-cutting edges TCMT - TCGW Boring Tipped variant one-cutting edge Carbide Cermet PcBN PCD P M K N S P K N Cutting material HC851 HC852 HC861 HC862 HC840 HC841 CP871 CP872 FU430 PU617 PU620 Medium machining Finishing medium machining Finishing a p (mm) TCGW 110204T51N-0AA- 0,5-2,5 TCGW 110208T51N-0AA- 0,5-2,5 TCGW 110204E01N-0AA-... 0,5-2,0 TCGW 110208E01N-0AA-... 0,5-2,0 TCMT 090202N-M30-... 0,25-2,0 TCMT 090204N-M30-... 0,5-2,0 TCMT 110202N-M30-... 0,25-2,5 TCMT 110204N-M30-... 0,5-2,5 TCMT 110208N-M30-... 0,75-2,5 TCMT 16T304N-M30-... 0,5-2,5 TCMT 16T308N-M30-... 0,75-2,5 TCMT 16T312N-M30-... 1,0-2,5 TCGW 110204E01N-0AA-... 0,1-1,0 TCGW 110208E01N-0AA-... 0,1-1,0 TCGW 110204F01N-0AA-... 0,1-1,0 TCGW 110208F01N-0AA-... 0,1-1,0 Indexable insert Boring Note: For general figures for the minimum boring diameter in connection with the number of teeth see section Technical appendix page 178. For clamping screws and screwdriver for indexable inserts see section Accessories page 166. Ordering example: On ordering please add the selected cutting material to the model. TCGW110204T51N-0AA-FU430 Cutting rate see page 184. Available from stock in Germany. Standard insert not carried in stock. (Delivery time upon request). 111

Tools with ISO elements Indexable inserts Boring Radial indexable inserts, three-cutting edges TCHT Boring, left handed design Carbide P M K N S Medium machining Cutting material Cutting edge design 2L 2R a p (mm) TCHT 090204E04L-...- 0,5-2,5 TCHT 090208E04L-...- 0,5-2,5 TCHT 110204E04L-...- 0,5-3,0 TCHT 110208E04L-...- 0,5-3,0 TCHT 16T304E04L-...- 0,5-4,0 TCHT 16T308E04L-...- 0,5-4,0 HP455 HU615 Cutting edge design 2L 2R a p (mm) TCHT 06T104E02L-...- 0,1-1 TCHT 06T104F01L-...- 0,1-1 TCHT 090204E02L-...- 0,1-1 TCHT 090208E02L-...- 0,1-1 TCHT 090204F01L-...- 0,1-1 Finishing TCHT 110204E02L-...- 0,1-1,5 TCHT 110208E02L-...- 0,1-1,5 TCHT 110202F01L-...- 0,1-1,5 TCHT 110204F01L-...- 0,1-1,5 TCHT 110208F01L-...- 0,1-1,5 TCHT 16T304F01L-...- 0,1-2,5 TCHT 16T308F01L-...- 0,1-2,5 Note: For general figures for the minimum boring diameter in connection with the number of teeth see section Technical appendix page 178. For clamping screws and screwdriver for indexable inserts see section Accessories page 166. Ordering example: On ordering please add the selected cutting edge design and the cutting material to the designation key. TCHT090204E04L-2L-HP455 Cutting rate see page 184. Available from stock in Germany. Standard insert not carried in stock. (Delivery time upon request). 112

Tools with ISO elements Indexable inserts Boring Radial indexable inserts, three-cutting edges TCHT Boring, right handed design Carbide P M K N S Medium machining Cutting material Cutting edge design 2L 2R a p (mm) TCHT 090204E04R-...- 0,5-2,5 TCHT 090208E04R-...- 0,5-2,5 TCHT 110204E04R-...- 0,5-3,0 TCHT 110208E04R-...- 0,5-3,0 TCHT 16T304E04R-...- 0,5-4,0 TCHT 16T308E04R-...- 0,5-4,0 HP455 HU615 Finishing Cutting edge design 2L 2R a p (mm) TCHT 06T104E02R-...- 0,1-1 TCHT 06T104F01R-...- 0,1-1 TCHT 090204E02R-...- 0,1-1 TCHT 090208E02R-...- 0,1-1 TCHT 090204F01R-...- 0,1-1 TCHT 110204E02R-...- 0,1-1,5 TCHT 110208E02R-...- 0,1-1,5 TCHT 110202F01R-...- 0,1-1,5 TCHT 110204F01R-...- 0,1-1,5 TCHT 110208F01R-...- 0,1-1,5 TCHT 16T304F01R-...- 0,1-2,5 TCHT 16T308F01R-...- 0,1-2,5 Indexable insert Boring Note: For general figures for the minimum boring diameter in connection with the number of teeth see section Technical appendix page 178. For clamping screws and screwdriver for indexable inserts see section Accessories page 166. Ordering example: On ordering please add the selected cutting edge design and the cutting material to the designation key. TCHT090204E04R-2L-HP455 Cutting rate see page 184. Available from stock in Germany. Standard insert not carried in stock. (Delivery time upon request). 113

Tools with ISO elements Indexable inserts Boring Radial indexable inserts, single cutting edges TCHT Boring Carbide P M K N S Medium machining Cutting material Cutting edge design 1L 1R a p (mm) TCHT 090204E04X-...-... 0,5-2,5 TCHT 090208E04X-...-... 0,5-2,5 TCHT 110204E04X-...-... 0,5-3,0 TCHT 110208E04X-...-... 0,5-3,0 TCHT 16T304E04X-...-... 0,5-4,0 TCHT 16T308E04X-...-... 0,5-4,0 HP455 HU615 Cutting edge design 1L 1R a p (mm) TCHT 06T104E02X-...-... 0,1-1 TCHT 06T104F01X-...-... 0,1-1 TCHT 090204E02X-...-... 0,1-1 TCHT 090208E02X-...-... 0,1-1 TCHT 090204F01X-...-... 0,1-1 Finishing TCHT 110204E02X-...-... 0,1-1,5 TCHT 110208E02X-...-... 0,1-1,5 TCHT 110202F01X-...-... 0,1-1,5 TCHT 110204F01X-...-... 0,1-1,5 TCHT 110208F01X-...-... 0,1-1,5 TCHT 16T304F01X-...-... 0,1-2,5 TCHT 16T308F01X-...-... 0,1-2,5 Note: For general figures for the minimum boring diameter in connection with the number of teeth see section Technical appendix page 178. For clamping screws and screwdriver for indexable inserts see section Accessories page 166. Ordering example: On ordering please add the selected cutting edge design and the cutting material to the designation key. TCHT090204E04X-1L-HP455 Cutting rate see page 184. Available from stock in Germany. Standard insert not carried in stock. (Delivery time upon request). 114

Tools with ISO elements Indexable inserts Boring Radial indexable inserts, two-cutting edges VBMT - VCMT - VBGW - VCGT - VCGW Boring Tipped variant one-cutting edge Carbide Cermet PcBN PCD P M K N S P K N Cutting material HC851 HC852 HC861 HC862 HU810 CP871 CP872 FU430 PU620 Medium machining finishing Finishing a p (mm) VBMT 110304N-M30-... 0,25-1,5 VBMT 110308N-M30-... 0,5-1,5 VBMT 160404N-M30-... 0,5-2,0 VBMT 160408N-M30-... 0,75-2,0 VCMT 110304N-M30-... 0,25-1,5 VCMT 160404N-M30-... 0,5-2,0 VCMT 160408N-M30-... 0,75-2,0 VCGT 160404N-M32-... 0,5-3,0 VBGW 160404E01N-0AA- 0,1-1.0 VBGW 160408E01N-0AA- 0,1-1.0 VBGW 160404F01N-0AA- 0,1-1.0 VBGW 160408F01N-0AA- 0,1-1.0 VCGW 160404E01N-0AA- 0,1-1.0 VCGW 160408E01N-0AA- 0,1-1.0 VCGW 160404F01N-0AA- 0,1-1.0 VCGW 160408F01N-0AA- 0,1-1.0 Indexable insert Boring Note: General figures for the minimum boring diameter in connection with the installation situation. For clamping screws and screwdriver for indexable inserts see section Accessories page 166. Ordering example: On ordering please add the selected cutting material to the designation key. VBMT110304N-M30-HC851 Cutting rate see page 184. Available from stock in Germany. Standard insert not carried in stock. (Delivery time upon request). 115

Tools with ISO elements Indexable inserts Milling Tangential indexable inserts, two-cutting edges CTND Milling Cutting material Cutting edge design D02 D02 D02 D02 D02 a p max. (mm)* CTND 09T308... R- CTND 09T308... L- Cutting edge design D03 D03 D03 a p max. (mm)* CTND 09T308... R- CTND 09T308... L- HP350 Carbide P M K N S HP382 HP382 HP350 HP718 * a p max. is dependent on the milling cutter type and specific application. For clamping screws and screwdriver for indexable inserts see section Accessories page 166. Ordering example: On ordering please add the selected cutting edge design and the cutting material to the designation key. CTND09T308D02R-HP382 Cutting rate see page 198. Available from stock in Germany. Standard insert not carried in stock. (Delivery time upon request). 116

Tools with ISO elements Indexable inserts Milling Tangential indexable inserts, two-cutting edges CTHD Milling Tipped variant one-cutting edge D67/D61 D87/D81 Carbide PcBN PCD P M K N S K N HP350 Cutting material Cutting edge design D02 D02 D02 D02 D00 D01 D01 a p max. (mm)* CTHD 09T304...R- CTHD 09T304...L- CTHD 09T308...R- CTHD 09T308...L- CTHD 09T312...R- CTHD 09T312...L- CTHD 09T304...R90M018- CTHD 09T304...L90M018- HP382 HP382 HP350 HU615 HP615 HP718 FU430 PU617 Cutting edge design D67 D61 a p max. (mm) CTHD 09T304...R- 2,5 CTHD 09T304...L- 2,5 CTHD 09T308...R- 2,5 CTHD 09T308...L- 2,5 CTHD 09T304...R90M018-2,5 CTHD 09T304...L90M018-2,5 Cutting edge design D87 D81 a p max. (mm)* CTHD 09T304...R- CTHD 09T304...L- CTHD 09T308...R- CTHD 09T308...L- CTHD 09T304...R90M018- CTHD 09T304...L90M018- Indexable insert Milling * a p max. is dependent on the milling cutter type and specific application. For clamping screws and screwdriver for indexable inserts see section Accessories page 166. Ordering example: On ordering please add the selected cutting edge design and the cutting material to the designation key. CTHD09T304D02R-HP350 Cutting rate see page 198. Available from stock in Germany. Standard insert not carried in stock. (Delivery time upon request). 117

Tools with ISO elements Indexable inserts Milling Tangential wide face indexable inserts, two-cutting edges CTHA For milling cutter ICM 90-C2-Finishing Tipped variant one-cutting edge Carbide PcBN PCD P M K N S K N HP350 Cutting material Cutting edge design H26 H26 H26 H26 H25 H26 H26 a p max. (mm) CTHA 09T304...R90M100-0,4 CTHA 09T304...R90M050-0,4 HP382 HP382 HP350 HU615 HP615 HP718 FU430 PU620 Cutting edge design D81 D87 D81 a p max. (mm) CTHA 09T304...R90M100-0,4 CTHA 09T304...R90M050-0,4 For clamping screws and screwdriver for indexable inserts see section Accessories page 167. Ordering example: On ordering please add the selected cutting edge design and the cutting material to the designation key. CTHA09T304H26R90M100-HP350 Cutting rate see page 198. Available from stock in Germany. Standard insert not carried in stock. (Delivery time upon request). 118

Tools with ISO elements Indexable inserts Milling Tangential indexable inserts, four-cutting edges CTHQ - CTMQ Milling Tipped variant one-cutting edge A67/A61 A87/A81 Carbide PcBN PCD P M K N S K N Cutting material Cutting edge design H03 H03 H13 H12 H12 H13 H12 H21 H22 H22 a p max. (mm)* CTHQ 090504...R- CTHQ 090504...L- CTHQ 090508...R- CTHQ 090508...L- CTHQ 090512...R- CTHQ 090512...L- CTHQ 090504...R90M018- CTHQ 090504...L90M018- CTMQ 090508...R... HP350 HP382 HP382 HP382 HP350 HU615 HP615 HP718 FU430 PU617 Cutting edge design A67 A61 a p max. (mm) CTHQ 090504...R- 2,5 CTHQ 090504...L- 2,5 CTHQ 090508...R- 2,5 CTHQ 090508...L- 2,5 CTHQ 090504...R90M018-2,5 CTHQ 090504...L90M018-2,5 Cutting edge design A87 A81 a p max. (mm)* CTHQ 090504...R- CTHQ 090504...L- CTHQ 090508...R- CTHQ 090508...L- CTHQ 090504...R90M018- CTHQ 090504...L90M018- Indexable insert Milling * a p max. is dependent on the milling cutter type and specific application. For clamping screws and screwdriver for indexable inserts see section Accessories page 167. Ordering example: On ordering please add the selected cutting edge design and the cutting material to the designation key. CTHQ090504H03R-HP350 Cutting rate see page 198. Available from stock in Germany. Standard insert not carried in stock. (Delivery time upon request). 119

Tools with ISO elements Indexable inserts Milling Tangential wide face indexable inserts, two-cutting edges CTHH For milling cutter ICM 90-C4-Finishing Tipped variant one-cutting edge Carbide PcBN PCD P M K N S K N HP350 Cutting material Cutting edge design H26 H26 H26 H26 H25 H26 H26 a p max. (mm) CTHH 090504...R90M100-0,4 CTHH 090504...R90M050-0,4 HP382 HP382 HP350 HU615 HP615 HP718 FU430 FU430 PU620 Cutting edge design A81 A87 A81 a p max. (mm) CTHH 090504...R90M100-0,4 CTHH 090504...R90M050-0,4 For clamping screws and screwdriver for indexable inserts see section Accessories page 167. Ordering example: On ordering please add the selected cutting edge design and the cutting material to the designation key. CTHH090504H26R90M100-HP350 Cutting rate see page 198. Available from stock in Germany. Standard insert not carried in stock. (Delivery time upon request). 120

Tools with ISO elements Indexable inserts Milling Tangential indexable inserts, four + four-cutting edges LTHU Milling Carbide P M K S Cutting material Cutting edge design H83 H93 H82 H83 H93 a p max. (mm)* LTHU 150508...N-... LTHU 150512...N- LTHU 150720...N- LTHU 150730...N- HP350 HP350 HP350 H83: Unstable conditions, medium machining H93: Stable conditions, roughing Indexable insert Milling * a p max. is dependent on the milling cutter type and specific application. For clamping screws and screwdriver for indexable inserts see section Accessories page 167. Ordering example: On ordering please add the selected cutting edge design and the cutting material to the designation key. LTHU150508H82N-HP350 Cutting rate see page 198. Available from stock in Germany. Standard insert not carried in stock. (Delivery time upon request). 121

Tools with ISO elements Indexable inserts Milling Radial indexable inserts, two-cutting edges BDGT Milling Tipped variant one-cutting edge Carbide PcBN PCD P M K N S K N Cutting material Cutting edge design U70 U70 a p max. (mm)* BDGT 11T302FR-...- BDGT 11T304FR-...- BDGT 11T308FR-...- BDGT 170404FR-...- BDGT 170408FR-...- BDGT 170420FR-...- BDGT 170431FR-...- HU825 HU825 PU617 PU620 Cutting edge design U71 U71 a p max. (mm) BDGT 11T302FR-...- 3,0 BDGT 11T304FR-...- 3,0 BDGT 170402FR-...- 4,0 BDGT 170404FR-...- 4,0 * a p max. is dependent on the milling cutter type and specific application. For clamping screws and screwdriver for indexable inserts see section Accessories page 166. Ordering example: On ordering please add the selected cutting edge design and the cutting material to the designation key. BDGT11T302FR-U70-HU825 Cutting rate see page 198. Available from stock in Germany. Standard insert not carried in stock. (Delivery time upon request). 122

Tools with ISO elements Indexable inserts Milling Radial indexable inserts, two-cutting edges BDMT Milling Carbide P M K N S HP883 Cutting material Cutting edge design M70 R70 M70 R70 R70 R70 a p max. (mm)* BDMT 11T304ER-...-... BDMT 11T308ER-...- BDMT 11T312ER-...- BDMT 11T320ER-...- BDMT 11T331ER-...- BDMT 170404ER-...- BDMT 170408ER-...- BDMT 170412ER-...- BDMT 170420ER-...- BDMT 170431ER-...- BDMT 170440ER-...- HP883 HP883 HP883 HP890 HP890 M70: Unstable conditions, medium machining R70: Stable conditions, roughing Cutting edge design R72 R72 R72 R72 Chip breaker a p max. (mm)* BDMT 11.. R72 R73 BDMT 11T308ER-...- Cutting edge design R73 R73 R73 R73 a p max. (mm)* 2 notches 3 notches BDMT 11T308ER-...- BDMT 170408ER-...- BDMT 17.. Chip breaker R73 R74 Cutting edge design R74 R74 R74 R74 a p max. (mm)* BDMT 170408ER-...- 3 notches 4 notches Assembly note The carrier tool is fitted with the same number of indexable inserts of design R72/R73 or R73/R74. Please pay attention to the markings on the carrier tool. BDMT 11T3 BDMT 1704 Indexable insert Milling * a p max. is dependent on the milling cutter type and specific application. For clamping screws and screwdriver for indexable inserts see section Accessories page 166. Ordering example: On ordering please add the selected cutting edge design and the cutting material to the designation key. BDMT11T304ER-M70-HP883 Cutting rate see page 198. R72 R73 R73 R74 Available from stock in Germany. Standard insert not carried in stock. (Delivery time upon request). 123

Tools with ISO elements Indexable inserts Milling Radial indexable inserts, four-cutting edges SEMT Milling HP883 Carbide P M K N S Cutting material Cutting edge design M65 M65 M65 M65 M65 M65 a p max. (mm)* SEMT 09T308R- -... SEMT 150408R- -... HP883 HP890 HU810 HP890 HU810 * a p max. is dependent on the milling cutter type and specific application. For clamping screws and screwdriver for indexable inserts see section Accessories page 166. Ordering example: On ordering please add the selected cutting edge design and the cutting material to the designation key. SEMT09T308R-M65-HP883 Cutting rate see page 198. Available from stock in Germany. Standard insert not carried in stock. (Delivery time upon request). 124

Tools with ISO elements Indexable inserts Milling Inserts in special design To efficiently machine complex contours with high shape accuracy, form cutting edges are often used. MAPAL offers all possible options in relation to shape, cutting material and coating also for these inserts. Modern production facilities guarantee the highest precision and flexibility of special MAPAL inserts. PCD and PcBN-tipped insets are also available in this variety. Fitted in the highly accurate insert seats, the best results both in terms of cost-effectiveness and in terms of quality are achieved. Advantages: High process reliability in case of contour-dependent shapes and geometries Saving in complex machining sequences Multi-cutting edge capability on manufacture of complex contours Indexable insert Milling 125

126

Tools with ISO elements Innovative complete solutions Innovative complete solutions MAPAL ISO tools unfold their possibilities particularly in the context of complete projects in which they are able to deliver significant advantages due to the combinations and high productivity. Together with tailored services and the complete tool package, MAPAL is able to optimally design parts in accordance with customer requirements and provide support. In the following the range of service offered by MAPAL and especially the significance of ISO tools are presented based on a few important parts. With the perfect tool to the optimal process 128 Brake calipers made of spheroidal graphite cast iron 130 Complete machining of turbochargers 131 Stub axle assembly made of grey cast iron or steel 132 Connecting rods made of forged steel 133 Compressor housing made of GG25 134 Gearbox housing made of GG25 135 Innovative solutions 127

With the perfect tool to the optimal process Due to the combination of innovative technology and absolute manufacturing precision, MAPAL ISO tools are high performance tools. However successful individual tools on their own are not sufficient for the competitive production requirements these days. Only an understanding of the complete machining process and the production process as a whole permits real progress. Advantage due to complete concepts The perfect interaction of all components in a machining process makes possible the highest possible cost-effectiveness and addresses the increasingly important aspect of resource-saving production. Here it is particularly important that comprehensive knowledge of all machining processes and machining technologies is available even during the process planning. MAPAL provides the ideal basis for the process planner with its broad range of innovative, high-performance tools and its extensive pool of experience. Advantages: Solutions for complete workpieces including all components Usage of efficient, cost-optimised tools Complete, cost-effective manufacturing process Process planning and implementation from a single source For this purpose, use is made of all tool technologies as necessary, from the highperformance solid carbide drill to the sophisticated mechatronic TOOLTRONIC tool. MAPAL ISO tools have particular significance during pre-machining and during milling. The results are machining solutions without compromises. Hybrid tools as process optimisers An important possible way of optimising processes, increasing productivity and productivity is to combine various machining technologies. So-called hybrid tools combine various machining systems in a manner that combines excellent performance with straightforward handling and cost-effective reconditioning. The specialists from MAPAL combine, in numerous ways, ISO tools with guide pad technology, with fixed brazed PCD machining stages, with solid carbide tools or with fixed tool technology. In this way maximum productivity and cost-effectiveness is achieved both in the process design and the tool design. 128

Tools with ISO elements Innovative complete solutions MAPAL Services offer numerous options Shorter product life cycles and increasing pressure on productivity are requiring ever better performance from the global manufacturing industry. Even the planning phase is very time-consuming and devours expensive resources. At the same time project and planning departments must react flexibly to the current order situation. To support customers with these challenges, MAPAL offers a comprehensive package of services. These services range from the definition of the correct machining strategy with efficient tools through the design of clamping fixtures to the preparation of NC programs and commissioning machining processes. Ongoing manufacturing is supported in the area of logistics, reconditioning and training. In this way MAPAL helps to keep manufacturing highly productive, cost-effective and reliable. The customer receives the complete process from a single source and gains capacity to strengthen the core business. Engineering MAPAL TET Planning of complete workpieces including all tools MAPAL re.tooling Planning of complete workpieces including all components and commissioning Logistics MAPAL TMS Tool management MAPAL TLS Logistics and stock management MAPAL Toolbase Tool dispensing systems Maintenance MAPAL re.conditioning Regrinding and reconditioning of tools, milling cartridges and indexable inserts MAPAL training Product and technology seminars MAPAL TOS Tool and process optimisation Innovative solutions 129

Tools with ISO elements Innovative complete solutions Brake calipers made of spheroidal graphite cast iron Potential for savings due to the latest manufacturing technology The quality of the manufacture of this safety-related part defines the braking forces via braking performance, stability under load and exact control. The MAPAL tool package for machining the brake caliper guarantees reliable manufacture with low manufacturing costs per unit. These advantages are provided, for example, by combination tools with which it is possible to drill, mill and deburr at various positions. In total up to 40 % of machining time can be saved using the MAPAL process. Tool highlights on the brake caliper 1. Control cut for the fist hole, premachining of the front area for the piston, pilot bore for the piston bore The combination of several machining steps reduces the cycle time and increases the machining quality. 2. Interpolation recessing of sealing ring groove and base profile The MAPAL tool reduces the machining time by 50 % compared to circular milling and improves the surface quality. 3. Fine machining of the piston bore The higher feed rate reduces the machining time by approx. 30 %. There is no setting effort, as re-grinding is possible the tool costs are reduced. 4. Fine machining of the rear of the brake housing A MAPAL actuating tool for machining centres combines diameter turning, chamfering and external grooving. In comparison to the previous process, the machining time is reduced by 12.5 seconds per workpiece. Advantages: Increased process reliability Reduction in the manufacturing costs per unit due to reduced machining times Cost guarantee due to cost per part Competent planning and reliable supply of tools with MAPAL complete process management 2 3 4 1 130

Tools with ISO elements Innovative complete solutions Complete machining of turbochargers MAPAL with leading tool technology Downsizing and turbochargers are technologies that are now indispensable in modern engine development. In the past machining centres and lathes were often necessary for the production of the turbine and compressor housing for turbochargers. MAPAL has developed a manufacturing method that makes complete machining possible on one machine. Contours and recesses are machined using the mechatronic tool system TOOLTRONIC and interpolation turning on machining centres. Complete machining tools also combine machining steps. Tool highlights for turbocharger housing 1. TOOLTRONIC for machining the contour MAPAL TOOLTRONIC, the interchangeable U axis, machines the inner contour, the diameter and various face surfaces. 2. Interpolation turning of recesses The cycle time is reduced by 35 % compared to milling. It is possible to improve the tool life due to a continuous cut and the shorter cutting time. 3. ISO tangential tool for complete machining One tool reliably, cost-effectively and precisely machines six machined features. Advantages: Machining of the main bore in the turbine housing in only four steps TOOLTRONIC replaces of the lathe Combination of a large number of machining steps due to tangential technology Innovative machining method for all machining tasks on parts for turbochargers 1 Innovative solutions 2 3 131

Tools with ISO elements Innovative complete solutions Stub axle assembly made of grey cast iron or steel Tangential technology for fast machining and low unit costs Stub axle assemblies must withstand high loads. High tolerances on shape and position must be achieved during the manufacture of the part, predominantly manufactured from grey cast iron and less frequently from steel. Despite the demanding machining, low costs are still required, as this is a mass produced part. By using multifunctional combination tools from MAPAL, tools and magazine stations are saved and therefore machining time and costs significantly reduced. Particularly advantageous for complete machining is the use of tangential indexable inserts. These inserts have a soft cut due to their positive rake angle and, due to the compact mounting, are very suitable for use on multi-insert tools with high feed rates. Tool highlights for stub axle assembly machining 1. Milling and drilling shock absorber mounting A combination of a disc milling cutter and insertion drill reduces the number of tool changes. 2. Main bore, internal machining Using the multi-stage tangential combination tool, semi-machining is saved. 3. Main bore, external machining The multi-stage combination tool with fixed insert pockets without preadjustment manufactures tolerances of less than ±0.1 mm. 4. External machining of kingpim Pre-machining, semi-machining and fine machining from one source permits the highest accuracies with the lowest scrap rate. Advantages: Process suitable for standard machines and custom machines Complete machining with minimum number of tools Rapid payback of the tool costs MAPAL service competence, also during the re-tooling of existing machines 3 2 1 4 132

Tools with ISO elements Innovative complete solutions Connecting rods made forged steel Stable, reliable process for machining lightweight connecting rods Connecting rods are engine parts subjected to high dynamic loads. Current trends in engine manufacture, for instance downsizing or the reduction of the CO 2 emissions with the same or even higher engine power output, also require new approaches during the development and manufacture of connecting rods. By using higher strength, innovative materials as well as new manufacturing processes, today it is possible to manufacture ever lighter connecting rods. In particular for the latest lightweight connecting rods MAPAL offers tool solutions for complete bore machining that reliably and cost-effectively meet all the requirements placed. To machine special part geometries, for instance the blind hole in the trapezoid form on the gudgeon pin bore, MAPAL has developed a hybrid tool that combines the advantages of ISO indexable inserts and MAPAL guide pad technology. In this way the blind hole is reliably produced in IT7 quality. Tool highlights for connecting rod machining Advantages: Stable and reliable process Combination tools reduce tool changes 1. Drilling from the solid and chamfering the small pin bore Solid drilling tool of reinforced design for heavily interrupted cuts. Additional chamfer machining in bore entrance and exit. 2. Hybrid tool for fine machining the blind hole at the small pin bore Combination of ISO indexable inserts and guide pad technology machines the trapezoid shape in IT7 quality. 3. Combination tool for small and large pin bore Combination tool with solid drilling, boring and chamfering stage for machining the small and large pin bore with minimal tool changes. 4. Solid carbide step drill for screw holes The tool combines the two bore diameters in the connecting rod and cap as well as the chamfer machining. 1 3 2 Innovative solutions 4 133

Tools with ISO elements Innovative complete solutions Compressor housing made of GG25 Machining a compressor housing precisely and quickly using ISO tangential tools For pre-machining and fine machining the housing and bearing cover for screw-type compressors, MAPAL offers tool solutions that are perfectly designed for the characteristic machining requirements of the compressor housing and for high efficiency. In particular the overlapping bores for the rotors for the main and secondary rotors with the related bearing bores in the compressor housing and bearing cover on the front face place high requirements on the machining tools. The reason the requirements are high is the very close geometric tolerances that are necessary for exact positioning of the spiral-shaped toothed rotors. The overlapping diameters result in a heavily interrupted cut that normally has a negative effect on the machining quality and tool life. However, this problem does not arise with the ISO combination tools used that, with their tangentially arranged indexable inserts, ensure particularly quiet tool running during the entire machining process, despite the large interruptions in the cuts. Tool highlights for machining compressor housings Advantages: Short machining times Reduced tool demand due to combination tools High positioning accuracy due to tangential technology 1. Combination tools with tangential technology Pre-machining of the rotor bores for main and secondary rotors as well as the related bores for the bearing seats. Despite the interrupted cuts the tools achieve very high positioning accuracy. 2. Fine machining of bearing seat for secondary rotor and through-bore Two-stage guide pad tool combines the fine machining of both bearing bores. 1 2 134

Tools with ISO elements Innovative complete solutions Gearbox housing made of GG25 Complete solution reduces machine demand Gearbox housings mostly have very specific, complex shapes and as a rule comprise of cast materials. Depending on the nature and task of the gearbox, it may be of single or multiple shell design. During manufacture it is challenging to achieve the related fits as well as the shape and position tolerances. Due to the innovative, multifunctional tangential tools the shortest cycle times are achieved and several machining tasks are combined into one machining step. This process creates an optimal basis for the best possible availability of the machining centres. In addition the combination solutions are designed taking into account the part families a further advantage for the usage of magazine stations. The number of tools is drastically reduced. Tool highlights for machining gearbox housings 1. Combined boring tool This tool combination comprising of solid carbide drill, ISO tangential technology and ISO cartridges saves non-productive times, increases the cost-effectiveness and ensures optimal productivity. 2. Multi-stage interpolation turning tool The advantage of interpolation turning compared to circular milling is, along with the shorter cycle time and the longer tool life, in the qualitative features such as circularity and surface finish. 4. Shoulder milling cutter with tangential technology The standard shoulder milling cutter ICM90-C4-Finishing offers, with its adjusting elements, the possibility of mounting optional wide face indexable inserts and in this way achieves the quality of a pure finishing milling cutter. 1 Advantages: Reliable process Everything from a single source Productivity increase due to technologically leading tool solutions Low investment costs due to reduced machine demand 2 3. Fine boring tool with guide pads The precise fine adjustment of the guide pad tool guarantees reliable component manufacture and offers the highest degree of accuracy and with it the basis for a long part service life. 3 Innovative solutions 4 135

136

Tools with ISO elements Cartridges Cartridges Along with the adjusting feature with a long adjustment travel, cartridges offer interesting possibilities for many applications as they can be interchanged quickly and straightforwardly. Cartridges are used for both internal and external machining tasks. In case of changes, for example, to chamfer angles, or in case of repair, cartridges can be interchanged without major effort. The range of MAPAL cartridges covers a large part of the installation design variants. Along with the standardised ISO cartridges, a series of compact cartridges for radial and tangential indexable inserts are available. Due to short lengths these offer even more design opportunities during the design of custom tools. Designation key 138 ISO cartridges 140 Compact cartridges 144 Compact cartridges for tangential indexable inserts 150 Size comparison MAPAL compact cartridges against ISO cartridges Example: Indexable insert size 09 10 Compact cartridges On request MAPAL also supplies cartridges and compact cartridges in custom designs. ISO cartridges Cartridges 137

Tools with ISO elements Cartridges Model key Model key cartridges and compact cartridges S T F C R Indexable insert fastening Blade form Tool holder shape Clearance angle Cutting direction S Screwed in place using countersunk bore C (80 ) S (90 ) F (90 ) G (90 ) J (93 ) A A K T K K T T A A K A N 0 R Right T (60 ) W (80 ) K (75 ) L (95 ) R (75 ) S (45 ) A T A K A K T K T K A A K T K T K C 7 P 11 D 15 E 20 Left L F (70 ) W (60 ) T (60 ) Y (85 ) A K T See features K T K T K A A K T K T K A K C S T W F A = Cartridges K = Compact cartridges T = Compact cartridges for tangential indexable inserts Compact cartridges with custom angle Data on the tool holder shape directly via the setting angle 70 z. B. ST70CR 08CK-09 80 z.b. SW80NR 18CT-09 138

Tools with ISO elements Cartridges Model key 0 8 C A - 0 9 Tool holder height Features Insert size Height data Code (mm) 06 6,0 1. digit Significance C A Cartridges 2. digit Significance Cartridge in accordance with DIN 4985 Incircle d d d d d l l l l l d (mm) C S T W F 5,56 05 09 6,35 06 06 11 06 9,525 09 09 16 09 10,16 07 12,7 12 12 12 13,65 09 08 8,0 10 10,0 K Compact cartridge similar to DIN 4985 12 12,0 14 14,0 T Compact cartridge similar to DIN 4985 for tangential indexable inserts 18 18,0 Cartridges 139

Tools with ISO elements Cartridges ISO cartridges Form F, G SCG l 3 l 1 90 d 1 min. h 1 t e SCF l 1 STF l 1 STG l 1 l 3 l 3 l 3 90 90 f f 90 f f h 2 e e e Shown as right hand version SCFCR. Dimensions Specification Related insert (referred to R-Nom) h 1 f R-Nom l 1 e l 3 h 2 t d 1 min. Accessory group STG SCG STF SCF SCFCR 08 CA-06 CC 0602 8 10 0,4 32 17 6 9,5 4,5 25 3 30011050 SCFCL 08 CA-06 CC 0602 8 10 0,4 32 17 6 9,5 4,5 25 3 30011051 SCFPR 08 CA-06 CP 0602 8 10 0,4 32 17 6 9,5 4,5 25 3 30011052 SCFPL 08 CA-06 CP 0602 8 10 0,4 32 17 6 9,5 4,5 25 3 30011053 SCFCR 10 CA-09 CC 09T3 10 14 0,8 50 20 8 13 5 40 5 30011054 SCFCL 10 CA-09 CC 09T3 10 14 0,8 50 20 8 13 5 40 5 30011055 SCFCR 12 CA-12 CC 1204 12 20 0,8 55 20 8 17 6 50 1 30011056 SCFCL12 CA-12 CC 1204 12 20 0,8 55 20 8 17 6 50 1 30011057 STFCR 08 CA-09 TC 0902 8 10 0,4 32 17 6 9,5 4,5 25 2 30011058 STFCL 08 CA-09 TC 0902 8 10 0,4 32 17 6 9,5 4,5 25 2 30011059 STFCR 10 CA-11 TC 1102 10 14 0,4 50 20 8 13 5 40 4 30011060 STFCL 10 CA-11 TC 1102 10 14 0,4 50 20 8 13 5 40 4 30011061 STFCR 12 CA-16 TC 16T3 12 20 0,8 55 20 8 17 6 50 6 30011062 STFCL 12 CA-16 TC 16T3 12 20 0,8 55 20 8 17 6 50 6 30011063 SCGCR 08 CA-06 CC 0602 8 10 0,4 32 17 6 9,5 4,5 25 3 30011064 SCGCL 08 CA-06 CC 0602 8 10 0,4 32 17 6 9,5 4,5 25 3 30011065 SCGPR 08 CA-06 CP 0602 8 10 0,4 32 17 6 9,5 4,5 25 3 30011066 SCGPL 08 CA-06 CP 0602 8 10 0,4 32 17 6 9,5 4,5 25 3 30011067 SCGCR 10 CA-09 CC 09T3 10 14 0,8 50 20 8 13 5 40 5 30011068 SCGCL 10 CA-09 CC 09T3 10 14 0,8 50 20 8 13 5 40 5 30011069 SCGCR 12 CA-12 CC 1204 12 20 0,8 55 20 8 17 6 50 1 30011070 SCGCL 12 CA-12 CC 1204 12 20 0,8 55 20 8 17 6 50 1 30011071 STGCR 08 CA-09 TC 0902 8 10 0,4 32 17 6 9,5 4,5 25 2 30011072 STGCL 08 CA-09 TC 0902 8 10 0,4 32 17 6 9,5 4,5 25 2 30011073 STGCR 10 CA-11 TC 1102 10 14 0,4 50 20 8 13 5 40 4 30011074 STGCL 10 CA-11 TC 1102 10 14 0,4 50 20 8 13 5 40 4 30011075 STGCR 12 CA-16 TC 16T3 12 20 0,8 55 20 8 17 6 50 6 30011076 STGCL 12 CA-16 TC 16T3 12 20 0,8 55 20 8 17 6 50 6 30011077 Supply includes: Cartridge with mounted components. Indexable insert and accessories please order separate. Dimensions in mm. 140

Tools with ISO elements Cartridges ISO cartridges Form J, K, L d 1 min. SSK h l 1 1 STJ SCL l 1 l 2 l1 t l 3 l 3 l 3 93 f f 95 75 95 f h 2 e e e Shown as right hand version STJCR. Dimensions Specification Related insert (referred to R-Nom) h 1 f R-Nom l 1 l 2 e l 3 h 2 t d 1 min. Accessory group STJ SSK SCL STJCR 08 CA-09 TC 0902 8 10 0,4 32-17 6 9,5 4,5 25 2 30011078 STJCL 08 CA-09 TC 0902 8 10 0,4 32-17 6 9,5 4,5 25 2 30011079 STJCR 10 CA-11 TC 1102 10 14 0,4 50-20 8 13 5 40 4 30011080 STJCL 10 CA-11 TC 1102 10 14 0,4 50-20 8 13 5 40 4 30011081 STJCR 12 CA-16 TC 16T3 12 20 0,8 55-20 8 17 6 50 6 30011082 STJCL 12 CA-16 TC 16T3 12 20 0,8 55-20 8 17 6 50 6 30011083 SSKCR 08 CA-06 SC 0602 8 10 0,4 33,5 32 17 6 9,5 4,5 25 3 30011084 SSKCL 08 CA-06 SC 0602 8 10 0,4 33,5 32 17 6 9,5 4,5 25 3 30011085 SSKCR 10 CA-09 SC 09T3 10 14 0,8 52,2 50 20 8 13 5 40 5 30011086 SSKCL 10 CA-09 SC 09T3 10 14 0,8 52,2 50 20 8 13 5 40 5 30011087 SSKCR 12 CA-12 SC 1204 12 20 0,8 58,1 55 20 8 17 6 50 1 30011088 SSKCL 12 CA-12 SC 1204 12 20 0,8 58,1 55 20 8 17 6 50 1 30011089 SCLCR 08 CA-06 CC 0602 8 10 0,4 32-17 6 9,5 4,5 25 3 30011090 SCLCL 08 CA-06 CC 0602 8 10 0,4 32-17 6 9,5 4,5 25 3 30011091 SCLPR 08 CA-06 CP 0602 8 10 0,4 32-17 6 9,5 4,5 25 3 30011092 SCLPL 08 CA-06 CP 0602 8 10 0,4 32-17 6 9,5 4,5 25 3 30011093 SCLCR 10 CA-09 CC 09T3 10 14 0,8 50-20 8 13 5 40 5 30011094 SCLCL 10 CA-09 CC 09T3 10 14 0,8 50-20 8 13 5 40 5 30011095 SCLCR 12 CA-12 CC 1204 12 20 0,8 55-20 8 17 6 50 1 30011096 SCLCL 12 CA-12 CC 1204 12 20 0,8 55-20 8 17 6 50 1 30011097 Cartridges Supply includes: Cartridge with mounted components. Indexable insert and accessories please order separate. Dimensions in mm. 141

Tools with ISO elements Cartridges ISO cartridges Form R, S d 1 min. h 1 SSR SSS STS l 1 l 1 l 1 l 2 l 2 l 2 75 l 3 l 3 l 3 t f 45 f 45 f h 2 e e e Shown as right hand version SSRCR. Dimensions Specification Related insert (referred to R-Nom) h 1 f R-Nom l 1 l 2 e l 3 h 2 t d 1 min. Accessory group SSR SSS STS SSRCR 08 CA-06 SC 0602 8 10 0,4 32 26,4 17 6 9,5 4,5 25 3 30011098 SSRCL 08 CA-06 SC 0602 8 10 0,4 32 26,4 17 6 9,5 4,5 25 3 30011099 SSRCR 10 CA-09 SC 09T3 10 14 0,8 50 41,3 20 8 13 5 40 5 30011100 SSRCL 10 CA-09 SC 09T3 10 14 0,8 50 41,3 20 8 13 5 40 5 30011101 SSRCR 12 CA-12 SC 1204 12 20 0,8 55 43,5 20 8 17 6 50 1 30011102 SSRCL 12 CA-12 SC 1204 12 20 0,8 55 43,5 20 8 17 6 50 1 30011103 SSSCR 08 CA-06 SC 0602 8 10 0,4 32,4 28 17 6 9,5 4,5 25 3 30011104 SSSCL 08 CA-06 SC 0602 8 10 0,4 32,4 28 17 6 9,5 4,5 25 3 30011105 SSSCR 10 CA-09 SC 09T3 10 14 0,8 50,1 44 20 8 13 5 40 5 30011106 SSSCL 10 CA-09 SC 09T3 10 14 0,8 50,1 44 20 8 13 5 40 5 30011107 SSSCR 12 CA-12 SC 1204 12 20 0,8 55,3 47 20 8 17 6 50 1 30011108 SSSCL 12 CA-12 SC 1204 12 20 0,8 55,3 47 20 8 17 6 50 1 30011109 STSCR 08 CA-09 TC 0902 8 10 0,4 34,1 28 17 6 9,5 4,5 25 2 30011110 STSCL 08 CA-09 TC 0902 8 10 0,4 34,1 28 17 6 9,5 4,5 25 2 30011111 STSCR 10 CA-11 TC 1102 10 14 0,4 51 44 20 8 13 5 40 4 30011112 STSCL 10 CA-11 TC 1102 10 14 0,4 51 44 20 8 13 5 40 4 30011113 STSCR 12 CA-16 TC 16T3 12 20 0,8 57,2 47 20 8 17 6 50 6 30011114 STSCL 12 CA-16 TC 16T3 12 20 0,8 57,2 47 20 8 17 6 50 6 30011115 Supply includes: Cartridge with mounted components. Indexable insert and accessories please order separate. Dimensions in mm. 142

Tools with ISO elements Cartridges ISO cartridges Form T, Y d 1 min. h 1 SST l 1 STT l 1 SSY l 2 l 2 l 60 60 3 l 3 l 3 l 2 l1 t f f 85 f h 2 e e e Shown as right hand version SSTCR. Dimensions Specification Related insert (referred to R-Nom) h 1 f R-Nom l 1 l 2 e l 3 h 2 t d 1 min. Accessory group SST STT SSY SSTCR 08 CA-06 SC 0602 8 9 0,4 32 26,9 17 6 9,5 4,5 25 3 30011116 SSTCL 08 CA-06 SC 0602 8 9 0,4 32 26,9 17 6 9,5 4,5 25 3 30011117 SSTCR 10 CA-09 SC 09T3 10 13,3 0,8 50 40,6 20 8 13 5 40 5 30011118 SSTCL 10 CA-09 SC 09T3 10 13,3 0,8 50 40,6 20 8 13 5 40 5 30011119 SSTCR 12 CA-12 SC 1204 12 18,9 0,8 55 44,8 20 8 17 6 50 1 30011120 SSTCL 12 CA-12 SC 1204 12 18,9 0,8 55 44,8 20 8 17 6 50 1 30011121 STTCR 08 CA-09 TC 0902 8 10,3 0,4 32 24,6 17 6 9,5 4,5 25 2 30011122 STTCL 08 CA-09 TC 0902 8 10,3 0,4 32 24,6 17 6 9,5 4,5 25 2 30011123 STTCR 10 CA-11 TC 1102 10 14 0,4 50 41,4 20 8 13 5 40 4 30011124 STTCL 10 CA-11 TC 1102 10 14 0,4 50 41,4 20 8 13 5 40 4 30011125 STTCR 12 CA-16 TC 16T3 12 20,2 0,8 55 42,5 20 8 17 6 50 6 30011126 STTCL 12 CA-16 TC 16T3 12 20,2 0,8 55 42,5 20 8 17 6 50 6 30011127 SSYCR 08 CA-06 SC 0602 8 10 0,4 32,5 32 17 6 9,5 4,5 25 3 30011128 SSYCL 08 CA-06 SC 0602 8 10 0,4 32,5 32 17 6 9,5 4,5 25 3 30011129 SSYCR 10 CA-09 SC 09T3 10 14 0,8 50,8 50 20 8 13 5 40 5 30011130 SSYCL 10 CA-09 SC 09T3 10 14 0,8 50,8 50 20 8 13 5 40 5 30011131 SSYCR 12 CA-12 SC 1204 12 20 0,8 56 55 20 8 17 6 50 1 30011132 SSYCL 12 CA-12 SC 1204 12 20 0,8 56 55 20 8 17 6 50 1 30011133 Cartridges Supply includes: Cartridge with mounted components. Indexable insert and accessories please order separate. Dimensions in mm. 143

Tools with ISO elements Cartridges Compact cartridges Compact cartridges Form F d 1 min. h 1 SCF l 1 SSF l 1 STF l 1 l 3 l 3 l 3 t 90 90 90 f f f h 2 e e e Shown as right hand version SCFCR. Dimensions Specification Related insert (referred to R-Nom) h 1 f R-Nom l 1 e l 3 h 2 t d 1 min. Accessory group SCF SSF STF SCFCR 06 CK-06V1 CC 0602 6 8,5 0,4 25 11 5 6,0 2,5 18 9 30011134 SCFCL 06 CK-06V1 CC 0602 6 8,5 0,4 25 11 5 6,0 2,5 18 9 30011135 SCFCR 06 CK-06V2 CC 0602 6 9,7 0,4 25 11 5 6,0 2,5 18 9 30011136 SCFCL 06 CK-06V2 CC 0602 6 9,7 0,4 25 11 5 6,0 2,5 18 9 30011137 SCFCR 10 CK-09 CC 09T3 10 14 0,8 40 17 8 15 5 33 14 30011138 SCFCL 10 CK-09 CC 09T3 10 14 0,8 40 17 8 15 5 33 14 30011139 SCFCR 12 CK-12 CC 1204 12 18 0,8 50 20 8 16 5 37 7 30011140 SCFCL 12 CK-12 CC 1204 12 18 0,8 50 20 8 16 5 37 7 30011141 SSFPR 08 CK-06 SP 0603 8 10 0,4 32 17 5 10 4,5 24 13 30011142 SSFPL 08 CK-06 SP 0603 8 10 0,4 32 17 5 10 4,5 24 13 30011143 SSFCR 10 CK-09 SC 09T3 10 14 0,8 44 17 8 15 5 33 16 30011144 SSFCL 10 CK-09 SC 09T3 10 14 0,8 44 17 8 15 5 33 16 30011145 SSFCR 12 CK-12 SC 1204 12 18 0,8 50 20 8 16 5 37 7 30011146 SSFCL 12 CK-12 SC 1204 12 18 0,8 50 20 8 16 5 37 7 30011147 STFCR 06 CK-09 TC 0902 6 10 0,4 25 11 5 6 2,5 18 17 30011148 STFCL 06 CK-09 TC 0902 6 10 0,4 25 11 5 6 2,5 18 17 30011149 STFCR 10 CK-11 TC 1102 10 14 0,4 40 17 8 15 5 33 11 30011150 STFCL 10 CK-11 TC 1102 10 14 0,4 40 17 8 15 5 33 11 30011151 STFCR 12 CK-16 TC 16T3 12 18 0,8 50 20 8 16 5 37 12 30011152 STFCL 12 CK-16 TC 16T3 12 18 0,8 50 20 8 16 5 37 12 30011153 Supply includes: Cartridge with mounted components. Indexable insert and accessories please order separate. Dimensions in mm. 144

Tools with ISO elements Cartridges Compact cartridges Compact cartridges Form G, L d 1 min. h 1 SCG l SCL 1 l 1 l 3 90 l 3 95 t f 95 f h 2 e e Shown as right hand version SCGCR. Dimensions Specification Related insert (referred to R-Nom) h 1 f R-Nom l 1 e l 3 h 2 t d 1 min. Accessory group SCG SCL SCGCR 06 CK-06V1 CC 0602 6 8,5 0,4 25 11 5 6 2,5 18 10 30011154 SCGCL 06 CK-06V1 CC 0602 6 8,5 0,4 25 11 5 6 2,5 18 10 30011155 SCGCR 06 CK-06V2 CC 0602 6 9,7 0,4 25 11 5 6 2,5 18 10 30011156 SCGCL 06 CK-06V2 CC 0602 6 9,7 0,4 25 11 5 6 2,5 18 10 30011157 SCGCR 10 CK-09 CC 09T3 10 14 0,8 40 17 8 15 5 33 15 30011158 SCGCL 10 CK-09 CC 09T3 10 14 0,8 40 17 8 15 5 33 15 30011159 SCGCR 12 CK-12 CC 1204 12 18 0,8 50 20 8 16 5 37 8 30011160 SCGCL 12 CK-12 CC 1204 12 18 0,8 50 20 8 16 5 37 8 30011161 SCLCR 06 CK-06V1 CC 0602 6 8,5 0,4 25 11 5 6,0 2,5 18 10 30011162 SCLCL 06 CK-06V1 CC 0602 6 8,5 0,4 25 11 5 6,0 2,5 18 10 30011163 SCLCR 06 CK-06V2 CC 0602 6 9,7 0,4 25 11 5 6,0 2,5 18 10 30011164 SCLCL 06 CK-06V2 CC 0602 6 9,7 0,4 25 11 5 6,0 2,5 18 10 30011165 SCLCR 10 CK-09 CC 09T3 10 14 0,8 40 17 8 15,0 5 33 15 30011166 SCLCL 10 CK-09 CC 09T3 10 14 0,8 40 17 8 15,0 5 33 15 30011167 SCLCR 12 CK-12 CC 1204 12 18 0,8 50 20 8 16,0 5 37 7 30011168 SCLCL 12 CK-12 CC 1204 12 18 0,8 50 20 8 16,0 5 37 7 30011169 Cartridges Supply includes: Cartridge with mounted components. Indexable insert and accessories please order separate. Dimensions in mm. 145

Tools with ISO elements Cartridges Compact cartridges l 1 STR l 2 Compact cartridges Form R l3 75 f d 1 min. SCR V1 SCR V2 SSR e h1 l2 l1 l 1 l2 l 2 l 1 l 3 l 3 l 3 75 75 75 t f f f h 2 e e e Shown as right hand version SCRCR. Dimensions Specification Related insert (referred to R-Nom) h 1 f R-Nom l 1 l 2 e l 3 h 2 t d 1 min. Accessory group STR SSR SCR V2 SCR V1 SCRCR 06 CK-06 V1 CC 0602 6 9,7 0,4 25 19,2 11 5 6 2,5 18 9 30011170 SCRCL 06 CK-06 V1 CC 0602 6 9,7 0,4 25 19,2 11 5 6 2,5 18 9 30011171 SCRCR 10 CK-09 V1 CC 09T3 10 14 0,8 44 35,5 17 8 15 5 33 14 30011172 SCRCL 10 CK-09 V1 CC 09T3 10 14 0,8 44 35,5 17 8 15 5 33 14 30011173 SCRCR 06 CK-06 V2 CC 0602 6 10 0,4 25 19,2 11 5 6 2,5 18 9 30011174 SCRCL 06 CK-06 V2 CC 0602 6 10 0,4 25 19,2 11 5 6 2,5 18 9 30011175 SCRCR 10 CK-09 V2 CC 09T3 10 14 0,8 44 35,5 17 8 15 5 33 16 30011176 SCRCL 10 CK-09 V2 CC 09T3 10 14 0,8 44 35,5 17 8 15 5 33 16 30011177 SSRPR 08 CK-06 SP 0603 8 10 0,4 32 26,3 17 5 10 4,5 24 13 30011178 SSRPL 08 CK-06 SP 0603 8 10 0,4 32 26,3 17 5 10 4,5 24 13 30011179 SSRCR 10 CK-09 SC 09T3 10 14 0,8 44 35,7 17 8 15 5 33 16 30011180 SSRCL 10 CK-09 SC 09T3 10 14 0,8 44 35,7 17 8 15 5 33 16 30011181 SSRCR 12 CK-12 SC 1204 12 18 0,8 50 38,6 20 8 16 5 37 7 30011182 SSRCL 12 CK-12 SC 1204 12 18 0,8 50 38,6 20 8 16 5 37 7 30011183 STRCR 06 CK-09 TC 0902 6 10 0,4 25 16,7 11 5 6 2,5 18 17 30011184 STRCL 06 CK-09 TC 0902 6 10 0,4 25 16,7 11 5 6 2,5 18 17 30011185 STRCR 10 CK-11 TC 1102 10 14 0,4 40 30,4 17 8 15 5 33 11 30011186 STRCL 10 CK-11 TC 1102 10 14 0,4 40 30,4 17 8 15 5 33 11 30011187 STRCR 12 CK-16 TC 16T3 12 18 0,8 50 36,1 20 8 16 5 37 12 30011188 STRCL 12 CK-16 TC 16T3 12 18 0,8 50 36,1 20 8 16 5 37 12 30011189 Supply includes: Cartridge with mounted components. Indexable insert and accessories please order separate. Dimensions in mm. 146

Tools with ISO elements Cartridges Compact cartridges Compact cartridges Form S d1 min. h 1 t SCS V1 SCS V2 SSS l 1 l 1 l 2 f l 2 l 3 l 3 l 3 45 45 45 f STS l 3 e l 1 l2 l 1 l 2 45 f f h 2 e e e Shown as right hand version SCSCR. Dimensions Specification Related insert (referred to R-Nom) h 1 f R-Nom l 1 l 2 e l 3 h 2 t d 1 min. Accessory group STS SSS SCS V2 SCS V1 SCSCR 06 CK-06 V1 CC 0602 6 9,7 0,4 25 20,8 11 5 6 2,5 18 9 30011190 SCSCL 06 CK-06 V1 CC 0602 6 9,7 0,4 25 20,8 11 5 6 2,5 18 9 30011191 SCSCR 10 CK-09 V1 CC 09T3 10 14 0,8 44 37,8 17 8 15 5 33 14 30011192 SCSCL 10 CK-09 V1 CC 09T3 10 14 0,8 44 37,8 17 8 15 5 33 14 30011193 SCSCR 06 CK-06 V2 CC 0602 6 10 0,4 25 20,8 11 5 6 2,5 18 9 30011194 SCSCL 06 CK-06 V2 CC 0602 6 10 0,4 25 20,8 11 5 6 2,5 18 9 30011195 SCSCR 10 CK-09 V2 CC 09T3 10 14,3 0,8 44 37,8 17 8 15 5 33 14 30011196 SCSCL 10 CK-09 V2 CC 09T3 10 14,3 0,8 44 37,8 17 8 15 5 33 14 30011197 SSSPR 08 CK-06 SP 0603 8 10 0,4 32 27,8 17 5 10 4,5 24 13 30011198 SSSPL 08 CK-06 SP 0603 8 10 0,4 32 27,8 17 5 10 4,5 24 13 30011199 SSSCR 10 CK-09 SC 09T3 10 14 0,8 44 37,9 17 8 15 5 33 14 30011200 SSSCL 10 CK-09 SC 09T3 10 14 0,8 44 37,9 17 8 15 5 33 14 30011201 SSSCR 12 CK-12 SC 1204 12 18 0,8 50 41,7 20 8 16 5 37 7 30011202 SSSCL 12 CK-12 SC 1204 12 18 0,8 50 41,7 20 8 16 5 37 7 30011203 STSCR 06 CK-09 TC 0902 6 10 0,4 25 18,9 11 5 6 2,5 18 17 30011204 STSCL 06 CK-09 TC 0902 6 10 0,4 25 18,9 11 5 6 2,5 18 17 30011205 STSCR 10 CK-11 TC 1102 10 14 0,4 40 33 17 8 15 5 33 11 30011206 STSCL 10 CK-11 TC 1102 10 14 0,4 40 33 17 8 15 5 33 11 30011207 STSCR 12 CK-16 TC 16T3 12 18 0,8 50 39,8 20 8 16 5 37 12 30011208 STSCL 12 CK-16 TC 16T3 12 18 0,8 50 39,8 20 8 16 5 37 12 30011209 Cartridges Supply includes: Cartridge with mounted components. Indexable insert and accessories please order separate. Dimensions in mm. 147

Tools with ISO elements Cartridges Compact cartridges STT l2 l1 Compact cartridges Form T d1 min. h 1 t SCT V1 SCT V2 SST l 1 l 1 l 2 f l 2 l 2 l3 l3 l3 60 60 f l3 e l1 60 60 f f h 2 e e e Shown as right hand version SCTCR. Dimensions Specification Related insert (referred to R-Nom) h 1 f R-Nom l 1 l 2 e l 3 h 2 t d 1 min. Accessory group STT SST SCT V2 SCT V1 SCTCR 06 CK-06 V1 CC 0602 6 9,7 0,4 25 19,8 11 5 6 2,5 18 9 30011210 SCTCL 06 CK-06 V1 CC 0602 6 9,7 0,4 25 19,8 11 5 6 2,5 18 9 30011211 SCTCR 10 CK-09 V1 CC 09T3 10 14 0,8 44 36,5 17 8 15 5 33 14 30011212 SCTCL 10 CK-09 V1 CC 09T3 10 14 0,8 44 36,5 17 8 15 5 33 14 30011213 SCTCR 06 CK-06 V2 CC 0602 6 10 0,4 25 19,8 11 5 6 2,5 18 9 30011214 SCTCL 06 CK-06 V2 CC 0602 6 10 0,4 25 19,8 11 5 6 2,5 18 9 30011215 SCTCR 10 CK-09 V2 CC 09T3 10 14 0,8 44 36,5 17 8 15 5 33 16 30011216 SCTCL 10 CK-09 V2 CC 09T3 10 14 0,8 44 36,5 17 8 15 5 33 16 30011217 SSTPR 08 CK-06 SP 0603 8 10 0,4 32 26,9 17 5 10 4,5 24 13 30011218 SSTPL 08 CK-06 SP 0603 8 10 0,4 32 26,9 17 5 10 4,5 24 13 30011219 SSTCR 10 CK-09 SC 09T3 10 14 0,8 44 36,6 17 8 15 5 33 14 30011220 SSTCL 10 CK-09 SC 09T3 10 14 0,8 44 36,6 17 8 15 5 33 14 30011221 SSTCR 12 CK-12 SC 1204 12 18 0,8 50 39,8 20 8 16 5 37 7 30011222 SSTCL 12 CK-12 SC 1204 12 18 0,8 50 39,8 20 8 16 5 37 7 30011223 STTCR 06 CK-09 TC 0902 6 10 0,4 25 17,6 11 5 6 2,5 18 17 30011224 STTCL 06 CK-09 TC 0902 6 10 0,4 25 17,6 11 5 6 2,5 18 17 30011225 STTCR 10 CK-11 TC 1102 10 14 0,4 40 31,4 17 8 15 5 33 11 30011226 STTCL 10 CK-11 TC 1102 10 14 0,4 40 31,4 17 8 15 5 33 11 30011227 STTCR 12 CK-16 TC 16T3 12 18 0,8 50 37,5 20 8 16 5 37 12 30011228 STTCL 12 CK-16 TC 16T3 12 18 0,8 50 37,5 20 8 16 5 37 12 30011229 Supply includes: Cartridge with mounted components. Indexable insert and accessories please order separate. Dimensions in mm. 148

Tools with ISO elements Cartridges Compact cartridges SSY l 1 l 1 l 2 STW l 2 Compact cartridges Form W, Y l 3 l 3 85 60 f f d 1 min. h 1 SCW V1 l1 l 2 SCW V2 e e l 1 l 1 SSW l2 l 2 l 3 l 3 l 3 60 60 60 t f f f h 2 e e e Shown as right hand version SCWCR. Dimensions Specification Related insert (referred to R-Nom) h 1 f R-Nom l 1 l 2 e l 3 h 2 t d 1 min. Accessory group SSY STW SSW SCW V2 SCW V1 SCWCR 06 CK-06 V1 CC 0602 6 9,7 0,4 25 22 11 5 6 2,5 18 9 30011230 SCWCL 06 CK-06 V1 CC 0602 6 9,7 0,4 25 22 11 5 6 2,5 18 9 30011231 SCWCR 10 CK-09 V1 CC 09T3 10 14 0,8 44 39,6 17 8 15 5 33 16 30011232 SCWCL 10 CK-09 V1 CC 09T3 10 14 0,8 44 39,6 17 8 15 5 33 16 30011233 SCWCR 06 CK-06 V2 CC 0602 6 10 0,4 25 22 11 5 6 2,5 18 9 30011234 SCWCL 06 CK-06 V2 CC 0602 6 10 0,4 25 22 11 5 6 2,5 18 9 30011235 SCWCR 10 CK-09 V2 CC 09T3 10 14,3 0,8 44 39,6 17 8 15 5 33 14 30011236 SCWCL 10 CK-09 V2 CC 09T3 10 14,3 0,8 44 39,6 17 8 15 5 33 14 30011237 SSWPR 08 CK-06 SP 0603 8 10 0,4 32 29,1 17 5 10 4,5 24 13 30011238 SSWPL 08 CK-06 SP 0603 8 10 0,4 32 29,1 17 5 10 4,5 24 13 30011239 SSWCR 10 CK-09 SC 09T3 10 14 0,8 44 39,7 17 8 15 5 33 16 30011240 SSWCL 10 CK-09 SC 09T3 10 14 0,8 44 39,7 17 8 15 5 33 16 30011241 SSWCR 12 CK-12 SC 1204 12 18 0,8 50 44,1 20 8 16 5 37 7 30011242 SSWCL 12 CK-12 SC 1204 12 18 0,8 50 44,1 20 8 16 5 37 7 30011243 STWCR 06 CK-09 TC 0902 6 10 0,4 25 20,7 11 5 6 2,5 18 17 30011244 STWCL 06 CK-09 TC 0902 6 10 0,4 25 20,7 11 5 6 2,5 18 17 30011245 STWCR 10 CK-11 TC 1102 10 14 0,4 40 35 17 8 15 5 33 11 30011246 STWCL 10 CK-11 TC 1102 10 14 0,4 40 35 17 8 15 5 33 11 30011247 STWCR 12 CK-16 TC 16T3 12 18 0,8 50 42,8 20 8 16 5 37 12 30011248 STWCL 12 CK-16 TC 16T3 12 18 0,8 50 42,8 20 8 16 5 37 12 30011249 SSYPR 08 CK-06 SP 0603 8 10 0,4 32 31,5 17 5 10 4,5 24 13 30011250 SSYPL 08 CK-06 SP 0603 8 10 0,4 32 31,5 17 5 10 4,5 24 13 30011251 SSYCR 10 CK-09 SC 09T3 10 14 0,8 44 43,2 17 8 15 5 33 16 30011252 SSYCL 10 CK-09 SC 09T3 10 14 0,8 44 43,2 17 8 15 5 33 16 30011253 SSYCR 12 CK-12 SC 1204 12 18 0,8 50 49 20 8 16 5 37 7 30011254 SSYCL 12 CK-12 SC 1204 12 18 0,8 50 49 20 8 16 5 37 7 30011255 Cartridges Supply includes: Cartridge with mounted components. Indexable insert and accessories please order separate. Dimensions in mm. 149

Tools with ISO elements Cartridges Compact cartridges for tangential indexable inserts Compact cartridges for tangential indexable inserts Form F, K SWF SCF d 1 min. h 1 h 2 d 1 min. h 1 t SWF SCF l 3 l 3 e l 1 l 1 90 f SCK SFF l 3 l 3 e l 1 l 2 l 1 75 f 90 90 f f h 2 t e e Shown as right hand version SCFNR. Dimensions Specification Related insert (referred to R-Nom) h 1 f R-Nom l 1 I 2 e l 3 h 2 t d 1 min. Accessory group SCK SFF SWF SCF SCFNR 10 CT-06 CTHQ0604 10 11 0,8 29 12 5 10,5 5 40 22 30305015 SCFNR 14 CT-09 CTHQ0905 14 16 0,8 41 18 8 16 7 65 24 30305018 SCFNR 18 CT-12 CTHQ1206 18 22 0,8 43 18 8 20 7 75 26 30305020 SCFDR 10 CT-06 CTHD0603 10 11 0,8 29 12 5 10,5 5 40 22 30552260 SCFNR 14 CT-09 CTHD09T3 14 16 0,8 41 18 8 16 7 65 l 1 20 30552263 SCFNR 18 CT-12 CTHD1204 18 22 0,8 43 18 8 20 7 75 18 30552264 l 3 SWFNR 14 CT-07 WTHQ0705 14 16 0,8 41 18 8 16 7 44 20 30305010 SWFNR 18 CT-09 WTHQ0906 18 22 0,8 43 18 8 20 7 59,5 18 30305013 80 SFFNR 10 CT-06 FTHQ0604 10 11 0,8 29 12 5 10,5 5 35 22 30305022 SFFNR 14 CT-09 FTHQ0905 14 16 0,8 41 18 8 16 7 44 24 30305024 SFFNR 18 CT-12 FTHQ1206 18 22 0,8 43 18 8 20 7 59,5 e 26 30305026 SCKNR 10 CT-06 CTHQ0604 10 11 0,8 30 28,5 12 5 10,5 5 40 23 30552278 SCKNR 14 CT-09 CTHQ0905 14 16 0,8 42,5 40,2 18 8 16 7 65 21 30552279 SCKDR 10 CT-06 CTHD0604 10 11 0,8 30 28,5 12 5 10,5 5 40 23 30552270 SCKDR 14 CT-09 CTHD0905 14 16 0,8 42,5 40,2 18 8 16 7 65 21 30552271 f Supply includes: Cartridge with mounted components. Indexable insert and accessories please order separate. Dimensions in mm. 150

Tools with ISO elements Cartridges Compact cartridges for tangential indexable inserts SCW l1 l2 Compact cartridges for tangential indexable inserts Form 80, W l3 60 f e SC80 d 1 min. h1 SC80 l1 SW80 l 1 SF80 l1 l3 80 f l 3 80 f l3 80 f h 2 t e e e Shown as right hand version SC80NR. Dimensions Specification Related insert (referred to R-Nom) h 1 f R-Nom l 1 l 2 e l 3 h 2 t d 1 min. Accessory group SCW SF80 SW80 SC80 SC80NR 10 CT-06 CTHQ0604 10 11 0,8 29 12 5 10,5 5 40 23 30305016 SC80NR 14 CT-09 CTHQ0905 14 16 0,8 41 18 8 16 7 65 25 30305019 SC80NR 18 CT-12 CTHQ1206 18 22 0,8 43 18 8 20 7 75 27 30305021 SC80DR 10 CT-06 CTHD0604 10 11 0,8 29 12 5 10,5 5 40 23 30552265 SC80DR 10 CT-09 CTHD0905 14 16 0,8 41 18 8 16 7 65 21 30552266 SC80DR 10 CT-12 CTHD1206 20 22 0,8 43 18 8 20 7 75 19 30552267 SW80NR 14 CT-07 WTHQ0705 14 16 0,8 41 18 8 16 7 44 21 30305012 SW80NR 18 CT-09 WTHQ0906 18 22 0,8 43 18 8 20 7 59,5 19 30305014 SF80NR 10 CT-06 FTHQ0604 10 11 0,8 29 12 5 10,5 5 35 23 30305023 SF80NR 14 CT-09 FTHQ0905 14 16 0,8 41 18 8 16 7 44 25 30305025 SF80NR 18 CT-12 FTHQ1206 18 22 0,8 43 18 8 20 7 59,5 27 30305027 SCWNR 10 CT-06 CTHQ0604 10 11 0,8 30 27,1 12 5 10,5 5 40 23 30552280 SCWNR 10 CT-09 CTHQ0905 14 16 0,8 42,5 38 18 8 16 7 65 21 30552281 SCWDR 10 CT-06 CTHD0604 10 11 0,8 30 27,1 12 5 10,5 5 40 23 30552272 SCWDR 10 CT-06 CTHD0905 14 16 0,8 42,5 38 18 8 16 7 65 21 30552273 Cartridges Supply includes: Cartridge with mounted components. Indexable insert and accessories please order separate. Dimensions in mm. 151

Tools with ISO elements Cartridges Compact cartridges for tangential indexable inserts Compact cartridges for tangential indexable inserts Form S, T, R SCS SCS SCT SCR d 1 min. h 1 l l 1 1 l l 2 2 l 2 l 1 l 3 l 3 60 l 3 75 45 t f f f h 2 Shown as right hand version SCSNR. e e Dimensions e Specification Related insert (referred to R-Nom) h 1 f R-Nom l 1 I 2 e l 3 h 2 t d 1 min. Accessory group SCS SCT SCR SCSNR 10 CT-06 CTHQ0604 10 11 0,8 30,0 25,8 12 5 10,5 5 40 31 30552282 SCSNR 14 CT-09 CTHQ0905 14 16 0,8 42,5 36 18 8 16 7 65 30 30552283 SCSDR 10 CT-06 CTHD0604 10 11 0,8 30 25,8 12 5 10,5 5 40 31 30552268 SCSDR 14 CT-09 CTHD0905 14 16 0,8 42,5 36 18 8 16 7 65 30 30552269 SCTNR 10 CT-06 CTHQ0604 10 11 0,8 30 24,7 12 5 10,5 5 40 22 30552284 SCTNR 14 CT-09 CTHQ0905 14 16 0,8 42,5 34,4 18 8 16 7 65 20 30552285 SCTDR 10 CT-06 CTHD0604 10 11 0,8 30 24,7 12 5 10,5 5 40 22 30552274 SCTDR 14 CT-09 CTHD0905 14 16 0,8 42,5 34,4 18 8 16 7 65 20 30552275 SCRNR 10 CT-06 CTHQ0604 10 11 0,8 30 24 12 5 10,5 5 40 22 30552286 SCRNR 14 CT-09 CTHQ0905 14 16 0,8 42,5 33,3 18 8 16 7 65 20 30552287 SCRDR 10 CT-06 CTHD0604 10 11 0,8 30 24 12 5 10,5 5 40 22 30552276 SCRDR 14 CT-09 CTHD0905 14 16 0,8 42,5 33,3 18 8 16 7 65 20 30552277 Supply includes: Cartridge with mounted components. Indexable insert and accessories please order separate. Dimensions in mm. 152

f f f f Tools with ISO elements Cartridges Compact cartridges for tangential indexable inserts SSS l1 SST l 1 Compact cartridges for tangential indexable inserts Form W, S, T, 20, R SSW SSW SSR SS20 d 1 min. l 1 l1 l 3 e l 2 45 f l3 e l2 l 1 60 h 1 l2 l2 l2 l 3 l 3 75 l3 60 20 h2 t e e e Shown as right hand version SSWDR. Dimensions Specification Related insert (referred to R-Nom) h 1 f l 1 I 2 e l 3 h 2 t d 1 min. Accessory group SSR SS20 SST SSS SSW SSWDR 08 CT-06 STHD0603 8,5 9 23,5 20,3 11,5 5 8,2 3,2 33 28 30552290 SSWDR 14 CT-09 STHD09T3 14 13,5 35,7 31 18 8 13,5 5 50 32 30552291 SSSDR 08 CT-06 STHD0603 8,5 9 23,5 19 11,5 5 8,2 3,2 33 28 30474905 SSSDR 14 CT-09 STHD09T3 14 13,5 35,7 29 18 8 13,5 5 50 29 30474906 SSTDR 08 CT-06 STHD0603 8,5 9 25 19,5 11,5 5 8,2 3,2 33 28 30552292 SSTDR 14 CT-09 STHD09T3 14 13,5 38 29,8 18 8 13,5 5 50 32 30552293 SS20DR 08 CT-06 STHD0603 8,5 9 25 19 11,5 5 8,2 3,2 33 28 30552294 SS20DR 14 CT-09 STHD09T3 14 13,5 38 29 18 8 13,5 5 50 32 30552295 SSRDR 08 CT-06 STHD0603 8,2 9 25 18,9 11,5 5 8,2 3,2 33 28 30552288 SSRDR 14 CT-09 STHD09T3 14 13,5 38 28,8 18 8 13,5 5 50 32 30552289 Cartridges Supply includes: Cartridge with mounted components. Indexable insert and accessories please order separate. Dimensions in mm. 153

154

Tools with ISO elements Accessories and spare parts Accessories and spare parts The broad range of MAPAL tools with ISO elements is supplemented with all essential additional parts and spare parts. Here the focus is on the parts that are necessary for the correct usage of the tools with ISO elements. However, the section also contains tools such as torque wrench sets and screwdrivers. Tangential roughing tools TSW 156 Tangential fine boring tools TFB 157 Assignment milling cutter adapter milling cutter clamping screw 158 Milling cutters general 160 Milling cutter arbors 162 Indexable inserts 166 Cartridges and compact cartridges 168 Screwdriver 170 Accessories Spare parts 155

d* M d k l 1 l 2 wrench l b t d 1 d 2 l 1 Clamping screw TSV ISO 4762 18 M12 18 40 12 10 10003678 25,0 10,0 9,5 7,5 4,5 20 30273452 M dk b d2 d1 M dk t Tools with ISO elements Accessories and spare parts Tangential roughing tools TSW Accessories and spare parts tangential roughing tools TSW Key block Fastening screw for key block Clamping screw for indexable insert Clamping screw d1 l1 b sw l1 l2 d2 l Clamping screw Key block Dimensions Comments Dimensions size (sw) sw l1 l2 Clamping screw TSV ISO 4762 27 M12 35 22 31 8 10006125** 40 M20 52 30 41 12 10006126** M dk l 13,0 10,0 11,2 8,0 4,5-10005640 14,9 12,0 12,6 8,0 4,5-10005165 23,0 16,0 16,0 10,0 5,5-10004064 26,5 25,4 25,0 19,0 13,0-10010103 l1 l1 l2 Clamping screw DIN 6367 60 M30 75 45 59-10017544 M dk α dk M sw l1 l2 TORX PLUS l1 Clamping screw for indexable insert (TORX PLUS ) Fastening screw for key block ISO 4762 Indexable insert size Dimensions Dimensions d k M l 1 TX α M d k l 1 l 2 0705 5,7 M4 11 15IP 60 10018468 0906 6,8 M5 13 20IP 60 10105084 wrench size (sw) M4 7,0 10,0 4,0 3 10003583 M4 7,0 16,0 4,0 3 10003586 M5 8,5 16,0 5,0 4 10003601 M12 18,0 25,0 12,0 10 10003675 ** See page 196 for handling notes. Dimensions in mm. d* = Diameter of arbor 156

Tools with ISO elements Accessories and spare parts Tangential fine boring tools TFB Accessories and spare parts tangential fine boring tools TFB Clamping screw for indexable insert Threaded spindle Adjusting wedge l M d α dk M TORX PLUS l1 Clamping screw for indexable insert (TORX PLUS ) Adjusting wedge Indexable insert size Dimensions Dimensions Comments d k M l 1 TX α M d l 0905 4,8 M3,5 11 10IP 60 10105079 M5x0,5 6,8 7 M5x0,5 LH K14884-153 l M 1 M 2 sw l 1 l 2 Threaded spindle Dimensions M 1 l l 1 M 2 l 2 wrench size (sw) M5x0,5LH 13 5,5 M5x0,5 5,5 2,5 10072872 Spare parts for intermediate adapters Module diameter D Quantity required Cylinder head screw in accordance with ISO 4762 Thrust pad Threaded pin Size Specification Specification 80 4 M6x20-12.9 10003619 K10086-14 10040108 K2865-164 10075074 100 4 M8x25-12.9 10003637 K10086-04 10075116 K2865-514 10075100 117 4 M8x25-12.9 10003637 K10086-04 10075116 K2865-514 10075100 140 4 M10x30-12.9 10003660 K10086-04 10075116 K2865-34 10075099 Spare parts for machine adapters For module diameter D Quantity required Threaded pin Size Specification 60-80 4 M8x1x16 K2865-24 10075355 100-140 4 M10x1x20 K2865-34 10075099 Accessories Spare parts 157

Tools with ISO elements Accessories and spare parts Assignment milling cutter adapter milling cutter clamping screw Assignment milling cutter adapter milling cutter clamping screw IFM75 ICM90-S4 MCA-HSK- Adapters MCA-SK- MCA-HSK- Adapters MCA-SK- Page 162 Page 164 Page 162 Page 164 Milling cutter clamping screw Milling cutter arbor ø22 10053822* ø27 10005164 10006125** 10049206 ø32 10004065 10009686** 10073932 ø40 10004066 10006126** 10064487 Without IC With IC Without IC With IC ø16 - - - 10003637 30439256 ø22 - - - 10003660 30439259 ø27 10005164 10006125** 10049206 - - ø32 10004065 10009686** 10073932 - - ø40 10004066 10006126** 10064487 - - ø60 - - - 10003692 10003692 ICM90 ICM90-B2 MCA-HSK- Adapters MCA-SK- MCA-HSK- Adapters MCA-SK- Page 162 Page 164 Page 162 Page 164 Milling cutter clamping screw Milling cutter clamping screw Milling cutter arbor Milling cutter arbor Without IC With IC ø22 10053822* ø27 10005164 10006125** 10049206 ø32 10004065 10009686** 10073932 ø40 10004066 10006126** 10064487 * Supply includes. ** See page 196 for handling notes. Without IC With IC ø16 - - - 10003637 30439256* ø22 - - - 10003660 30439259* ø27 - - - 10003677 30439263* ø32 - - - 10003691 30439265* 158

Tools with ISO elements Accessories and spare parts Assignment milling cutter adapter milling cutter clamping screw ICM90-2BM IDM88/90 MCA-HSK- Adapters MCA-SK- MCA-HSK- Adapters MCA-SK- Page 162 Page 164 Page 162 Page 164 Milling cutter clamping screw Milling cutter clamping screw Milling cutter arbor Milling cutter arbor Without IC ø16 10003637* ø22 10003662* ø27 10003678* ø32 10003692* ø40 10004066 10006126** Without IC ø32 10004065 10009686** ø40 10004066 10006126** IHM90 Example: Clamping using a standard arbor MCA-HSK- MCA-HSK- Adapters MCA-SK- Page 162 Page 164 Milling cutter clamping screw Milling cutter arbor Without IC With IC ø40 10004066 10006126** 10064487 MCA-HSK- Spacer ring IDM88/90 Milling cutter clamping screw * Supply includes. ** See page 196 for handling notes. Accessories Spare parts 159

Tools with ISO elements Accessories and spare parts Milling Accessories milling ICM90-C2-Finishing, IDM88-L8-L/R IDM88-L8-L/R Clamping screw Threaded bush Adjusting wedge Threaded spindle Backing plate l M TORX PLUS sw l 1 M l d k M l 1 TX α M3 8 1,5 With IC 30433620 M5 5 2,5 Without IC 10021808 LT_U15 5,7 M4 17 15IP 60 30414702 M l M d k l 1 l 2 M 1 M4x0,5 9 2 M4x0,5 LH K1751-74 M6x0,5 8 11 1 4 4 M6x0,5x12/M4 30413235 l M d M M 1 d k sw l 1 l 2 t d 1 d 2 b M Threaded pin Clamping screw for indexable insert (IDM88-L8-L/R) Dimensions Comments Indexable insert size Dimensions wrench size (sw) l M 1 M 2 sw l 1 l 2 Threaded spindle Dimensions Model Threaded bush (IDM88-L8-L/R) Dimensions Model wrench size (sw) wrench size (sw) t 1 l Adjusting wedge Dimensions Model Backing plate (IDM88-L8-L/R) Dimensions Comments M d l d 1 d 2 l b t t 1 Dimensions in mm. 160

Tools with ISO elements Accessories and spare parts Milling Coolant tube Spacer ring Milling cutter clamping screw d1 d M dk l l1 l2 Spacer ring DIN 2084-B Dimensions Comments Milling cutter clamping screws Dimensions Comments d* d 1 d l 32 32 45 20 for IDM90... with WSP CT 10020571 32 32 45 3 for IDM90... with WSP CT 10020564 32 32 45 10 for IDM88 with WSP LT_U 10020569 32 32 45 2 for IDM88 with WSP LT_U 10020563 40 40 54 20 for IDM90... with WSP CT 10004780 40 40 54 6 for IDM90... with WSP CT 10004418 40 40 54 10 for IDM88 with WSP LT_U 10006639 40 40 54 5 for IDM88 with WSP LT_U 10008638 Coolant tube M d2 d1 Dimensions Comments d* d 1 d 2 M18x1 12 8 For HSK 63 30326006 M24x1,5 16 12 For HSK 100 30326008 d* M d k l 1 l 2 16 M8 20 16 6-10007286 22 M10 28 18 7-10006016 27 M12 35 22 8 - Without IC 10005164 32 M16 42 26 9-10004065 40 M20 52 30 10-10004066 sw wrench size (sw) M 16 M8 20 16 7 5 10041356** 22 M10 28 18 8 6 10009642** 27 M12 35 22 9 8 Without IC 10006125** 32 M16 41 26 10 10 10009686** 40 M20 52 30 11 12 10006126** M l1 l2 dk dk M dk sw l1 l2 Milling cutter clamping screws ISO 4762 Dimensions Comments sw 22 M10 28 18 42.5 10 10053822 27 M12 38 22 47,5 12 10049206 With IC 32 M16 44 26 48,5 14 10073932 40 M20 56 30 62,5 17 10064487 l1 l2 d* M d k l 1 l 2 16 M8 13 25 8 6 10003637 22 M10 16 30 10 8 10003660 22 M10 16 40 10 8 10003662 Without IC 27 M12 18 40 12 10 10003678 32 M16 24 45 16 14 10003692 40 M16 24 45 16 14 10003692 d* = Diameter of arbor ** See page 197 for handling notes. Dimensions in mm. wrench size (sw) sw M 16 M8 13 25 33 5 30439256 22 M10 16 30 40 6 30439259 With IC 27 M12 18 35 47 8 30439263 32 M16 24 36 52 12 30439265 l1 l2 dk 161 Accessories Spare parts

Tools with ISO elements Accessories and spare parts Milling cutter arbors Milling cutter arbors for milling cutters with longitudinal or cross slot in accordance with DIN 69882-2 Shank HSK-A in accordance with DIN 69893-1 l 4 d 1 d 2 l 3 l 1 l 2 Nominal size HSK-A Dimensions Weight kg Specification d 1 d 2 l 1 l 2 l 3 l 4 63 16 32 50 27 17 60 0,9 MCA-HSK-A063-16-050-1-0-W 30319348 63 22 40 48 31 19 60 1,0 MCA-HSK-A063-22-048-1-0-W 30319349 63 32 58 46 38 24 60 1,4 MCA-HSK-A063-32-046-1-0-W 30319352 63 40 70 56 41 27 70 1,8 MCA-HSK-A063-40-056-1-0-W 30319353 100 16 32 50 27 17 60 2,4 MCA-HSK-A100-16-050-1-0-W 30319359 100 22 40 48 31 19 60 2,6 MCA-HSK-A100-22-048-1-0-W 30319360 100 32 58 46 38 24 60 3,0 MCA-HSK-A100-32-046-1-0-W 30319362 100 40 70 56 41 27 70 3,4 MCA-HSK-A100-40-056-1-0-W 30319363 Spare parts For arbor diameter Milling cutter clamping screw in accordance with DIN 6367 Feather key in accordance with DIN 6885-1 (with jacking thread) Driving ring in accordance with DIN 6366-1 d 1 Size Size Size 16 M8 10007286 4x4x20 30433907 Gr.16 10008712 22 M10 10006016 6x6x25 10059420 Gr.22 10032860 32 M16 10004065 8x7x28 30433910 Gr.32 10076829 40 M20 10004066 10x8x32 30433914 Gr.40 10004785 Supply includes: Milling cutter clamping screw, feather key with jacking thread and driving ring, does not include coolant tube. Design: Permissible run-out variation on the hollow taper shank in relation to the arbor d 1 = 0.008 mm. Note: Milling adapter rings in accordance with DIN 2084 on request. For coolant tubes see page 161. Balancing quality: G 2.5 at 16,000 min -1 Dimensions in mm. 162

Tools with ISO elements Accessories and spare parts Milling cutter arbors Milling cutter arbors with enlarged face connection diameter in accordance with DIN 69882-3 Shank HSK-A in accordance with DIN 69893-1 d 1 d 2 l 1 l 2 Nominal size HSK-A Dimensions d 1 d 2 l 1 l 2 Weight kg Specification With milling cutter clamping screw 1 63 22 48 50 19 1,1 MCA-HSK-A063-22-050-1-0-W 30329254 63 27 60 60 21 1,3 MCA-HSK-A063-27-060-1-0-W 30329256 63 32 78 60 24 1,4 MCA-HSK-A063-32-060-1-0-W 30329257 63* 40 89 60 27 1,9 MCA-HSK-A063-40-060-1-0-W 30329259 100 22 48 50 19 2,5 MCA-HSK-A100-22-050-1-0-W 30329270 100 27 60 50 21 2,7 MCA-HSK-A100-27-050-1-0-W 30329271 100 32 78 50 24 2,8 MCA-HSK-A100-32-050-1-0-W 30329272 100* 40 89 60 27 3,8 MCA-HSK-A100-40-060-1-0-W 30329274 100* 60 140 70 40 5,5 MCA-HSK-A100-60-070-1-0-W 30329276 Spare parts For arbor diameter Milling cutter clamping screw in accordance with DIN 6367 Milling cutter clamping screw with internal coolant supply (e.g. for MAPAL PCD milling heads) Key block (2x) Fastening screw in accordance with ISO 4762 (2x) d 1 Size Specification Size 22 M10 10006016 30326178 MT1013-01 10005640 M4x10-12.9 10003583 27 M12 10005164 30326179 MT1215-01 10005165 M4x16-12.9 10003586 32 M16 10004065 30326180 MT1422-01 10004063 M5x16-12.9 10003601 40 M20 10004066 30326181 MT1623-01 10004064 M5x16-12.9 10003601 60 M30 10017544 MT2625-01 10010103 M12x25-12.9 10003675 Supply includes: 1 Key blocks attached and milling cutter clamping screw in accordance with DIN 6367. Design: Permissible run-out variation on the hollow taper shank in relation to the arbor d 1 = 0.008 mm. Six balancing bores on the periphery. Note: The sizes marked with * have four additional threaded bores for mounting cutter heads with tool fastening in accordance with DIN 2079. For coolant tubes see page 161. Balancing quality: G 2.5 at 16,000 min -1 Accessories Spare parts Dimensions in mm. 163

d 2 d 1 Tools with ISO elements Accessories and spare parts Milling cutter arbors Milling cutter arbors with enlarged face connection diameter Shank SK in accordance with DIN 69871 Form AD/B l 1 l 2 Nominal size SK Dimensions d 1 d 2 l 1 l 2 Weight kg Specification With milling cutter clamping screw 1 40** 16 38 35 17 0,8 MCA-SK040-16-035-3-0-W 30504163 40 22 48 35 19 1,1 MCA-SK040-22-035-3-0-W 10066833 40 27 50 35 21 1,1 MCA-SK040-27-035-3-0-W 10066834 40 32 78 50 24 1,7 MCA-SK040-32-050-3-0-W 10066835 40* 40 89 50 27 1,9 MCA-SK040-40-050-3-0-W 10066836 50** 16 38 50 17 2,4 MCA-SK050-16-035-3-0-W 30504162 50 22 48 35 19 3,1 MCA-SK050-22-035-3-0-W 10073552 50 27 60 35 21 3,3 MCA-SK050-27-035-3-0-W 10073743 50 32 78 35 24 3,7 MCA-SK050-32-035-3-0-W 10073744 50* 40 89 50 27 4,3 MCA-SK050-40-050-3-0-W 10073745 50* 60 129 70 40 5,0 MCA-SK050-60-070-3-0-W 10073746 Spare parts For arbor diameter + Milling cutter clamping screw in accordance with DIN 6367 Key block Fastening screw in accordance with ISO 4762 d 1 Size Specification Size 22 M10 10006016 MT1013-01 10005640 M4x10-12.9 10003583 27 M12 10005164 MT1215-01 10005165 M4x16-12.9 10003586 32 M16 10004065 MT1422-01 10004063 M5x16-12.9 10003601 40 M20 10004066 MT1623-01 10004064 M5x16-12.9 10003601 60 M30 10017544 MT2625-01 10010103 M12x25-12.9 10003675 Supply includes: 1 Attached key blocks and milling cutter clamping screw in accordance with DIN 6367, does not include pull stud. Bores for coolant supply in accordance with Form B sealed on delivery with threaded pins. Design: Permissible run-out variation on the taper shank in relation to the arbor diameter d 1 = 0.008 mm. Dimensions in mm. Note: The sizes marked with * have four additional threaded bores for mounting cutter heads with tool fastening in accordance with DIN 2079. The sizes marked with ** are available on request. Balancing quality: G 2.5 at 16,000 min -1 164

Tools with ISO elements Accessories and spare parts Clamping tools Note: There is a large selection of further clamping tools in the catalogue "MAPAL competence clamping technology" Accessories Spare parts 165

Tools with ISO elements Accessories and spare parts Radial indexable inserts Accessories for radial indexable inserts M Torx size l 1 Indexable insert Indexable insert size Dimension [Mxl] Model Clamping screw Tightening torque [Nm] Screwdriver Torx size BD 11T3 M2.5 x 5.4 M2.5x5.4-TX8 1 TX8 30419328 10019467 1704 M4 x 6.9 M4x6.9-TX15 3,5 TX15 30419329 10019469 CC 0602 M2.5 x 6 MN659 M2.5x6-TX8-IP 1 TX8-IP 10105073 30414760 09T3 M3.5 x 9 MN659 M3.5x9-TX15-IP 2,8 TX15-IP 10105078 30414764 1204 M5 x 11 MN659 M5x11-TX20-IP 7,5 TX20-IP 10105082 30414766 DC 0702 M2.5 x 6 MN659 M2.5x6-TX8-IP 1 TX8-IP 10105073 30414760 11T3 M3.5 x 9 MN659 M3.5x9-TX15-IP 2,8 TX15-IP 10105078 30414764 SP 0603 M2.5 x 6 MN659 M2.5x6-TX8-IP 1 TX8-IP 10105073 30414760 TC 06T1 M2 x 4.95 MN659 M2x4.95-TX6-IP 0,5 TX6-IP 10002712 30414758 0902 M2.2 x 5.5 MN659 M2.2x5.5-TX7-IP 0,8 TX7-IP 10105070 30414759 1102 M2.5 x 6 MN659 MN2.5x6-TX8-IP 1 TX8-IP 10105073 30414760 16T3 M3.5 x 9 MN659 M3.5x9-TX15-IP 2,8 TX15-IP 10105078 30414764 SC 09T3 M3.5 x 9 MN659 M3.5x9-TX15-IP 2,8 TX15-IP 10105078 30414764 1204 M5 x 11 MN659 M5x11-TX20-IP 7,5 TX20-IP 10105082 30414766 SE 09T3 M3 x 8.5 MN659 M3x8.5-TX8-IP 1,8 TX8-IP 10105076 30414760 1504 M5 x 11 MN659 M5x11-TX20-IP 7,5 TX20-IP 10105083 30414766 VB /VC 1103 M2.5 x 6 MN659 MN2.5x6-TX8-IP 1 TX8-IP 10105073 30414760 1604 M3.5 x 9 MN659 M3.5x9-TX15-IP 2,8 TX15-IP 10105078 30414764 166

Tools with ISO elements Accessories and spare parts Tangential indexable inserts Accessories for tangential indexable inserts Clamping screw Screwdriver Indexable insert Indexable insert size Dimension [Mxl] Model Tightening torque [Nm] Torx size CT 0603 M2.5 x 6 MN659 M2.5x6-TX8-IP 1 TX8-IP 10105073 30414760 0604 M2.5 x 7.5 MN659 M2.5x7.5-TX7-IP 1 TX7-IP 10111274 30414759 09T3 M3.5 x 9.4 MN659 M3.5x9.4-TX10-IP 2,8 TX10-IP 10007315 30414763 0905 M3.5 x 11 MN659 M3.5x11-TX10-IP 2,8 TX10-IP 10105079 30414763 1206 M5 x 14 MN659 M5x14-TX20-IP 7,5 TX20-IP 10006485 30414766 FT 0604 M2.5 x 7.5 MN659 M2.5x7.5-TX7-IP 1 TX7-IP 10111274 30414759 0905 M3.5 x 11 MN659 M3.5x11-TX10-IP 2,8 TX10-IP 10105079 30414763 LT M4 x 17 MN659 M4x17-TX15-IP 30414702 Sleeve M6x0.5x12-sw4 30413235 1505 U-plate 15.875x2.38x9.625 30413233 4 TX15-IP 30414764 (without sleeve) M4 x 11 MN659 M4x11-TX15-IP 10018468 1507 M4 x 17 MN659 M4x17-TX15IP 30414702 ST 0603 M2.5 x 6 MN659 M2.5x6-TX8-IP 1 TX8-IP 10105073 30414760 WT 0705 M4 x 11 MN659 M4x11-TX15-IP 4 TX15-IP 10018468 30414764 0906 M5 x 13 MN659 M5x13-TX20-IP 7,5 TX20-IP 10105084 30414766 High-temperature screw paste Ceramic paste / re-sealable PE tube 100 g 30515526 Accessories Spare parts 167

Tools with ISO elements Accessories and spare parts Cartridges and compact cartridges Accessories for ISO cartridges and compact cartridges of radial and tangential design ISO cartridges Accessory group Ordering description Head Cap Screw Fastening screw for cartridge Axial setting screw Radial setting screw Tightening torque [Nm] Ordering description Capstan Screw Ordering description Adjusting Screw 1 DIN7984 M6x20-10.9 12 10019671 M5 x 10 10029150 DIN913 M4x10-45H 10003433 2 DIN7984 M4x12-10.9 3 10019695 M3 x 8 10002641 DIN913 M3x6-45H 10003422 3 DIN7984 M4x12-10.9 3 10019695 M3 x 8 10002641 DIN913 M3x6-45H 10003422 4 DIN7984 M6x16-10.9 12 10019703 M5 x 10 10029150 DIN913 M4x8-45H 10003432 5 DIN7984 M6x16-10.9 12 10019703 M5 x 10 10029150 DIN913 M4x8-45H 10003432 6 DIN7984 M6x20-10.9 12 10019671 M5 x 10 10029150 DIN913 M4x10-45H 10003433 Compact cartridges 7 ISO7380 M6x25-10.9 12 10050012 M5 x 7 10018493 DIN915 M4x10-45H 10003900 8 ISO7380 M6x25-10.9 12 10050012 M5 x 7 10018493 DIN915 M4x10-45H 10003900 9 ISO7380 M3x10-10.9 1,8 30005484 M3 x 5 10025039 DIN915 M3x6-45H 10003894 10 ISO7380 M3x10-10.9 1,8 30005484 M3 x 5 10025039 DIN915 M3x6-45H 10003894 11 ISO7380 M6x20-10.9 12 10027182 M5 x 7 10018493 DIN915 M4x10-45H 10003900 12 ISO7380 M6x25-10.9 12 10050012 M5 x 7 10018493 DIN915 M4x10-45H 10003900 13 ISO7380 M4x14-10.9 3 30002941 M3 x 5 10025039 DIN915 M3x6-45H 10003894 14 ISO7380 M6x20-10.9 12 10027182 M5 x 7 10018493 DIN915 M4x10-45H 10003900 15 ISO7380 M6x20-10.9 12 10027182 M5 x 7 10018493 DIN915 M4x10-45H 10003900 16 ISO7380 M6x20-10.9 12 10027182 M5 x 7 10018493 DIN915 M4x10-45H 10003900 17 ISO7380 M3x10-10.9 1,8 30005484 M3 x 5 10025039 DIN915 M3x6-45H 10003894 Compact cartridges for tangential indexable insert 18 ISO 4762-M6X25-12.9 20 10003620 M5x7 10018493 ISO 4028-M4x10-45H-KL 30351530 19 ISO 4762-M6X25-12.9 20 10003620 M5x7 10018493 ISO 4028-M4x10-45H-KL 30351530 20 DIN 7984-M6X20-10.9 12 10019671 M5x7 10018493 ISO 4028-M4x10-45H-KL 30351530 21 DIN 7984-M6X20-10.9 12 10019671 M5x7 10018493 ISO 4028-M4x10-45H-KL 30351530 22 DIN 7984-M4X16-10.9 3 10019685 M3x5 10025039 ISO 4028-M3x6-45H-KL 30351529 23 DIN 7984-M4X16-10.9 3 10019685 M3x5 10025039 ISO 4028-M3x6-45H-KL 30351529 24 DIN 7984-M6X20-10.9 12 10019671 M5x7 10018493 ISO 4028-M4x10-45H-KL 30351530 25 DIN 7984-M6X20-10.9 12 10019671 M5x7 10018493 ISO 4028-M4x10-45H-KL 30351530 26 ISO 4762-M6X25-12.9 20 10003620 M5x7 10018493 ISO 4028-M4x10-45H-KL 30351530 27 ISO 4762-M6X25-12.9 20 10003620 M5x7 10018493 ISO 4028-M4x10-45H-KL 30351530 28 ISO 7380-M4x12-10.9 3 10016040 M3x5 10025039 - - 29 ISO 4762-M6X25-12.9 20 10003620 M5x7 10018493 - - 30 DIN 7984-M6X20-10.9 12 10019671 M5 x 7 10018493 ISO 4028-M4x10-45H-KL 30351530 31 DIN 7984-M4X16-10.9 3 10019685 M3 x 5 10025039 ISO 4028-M3x6-45H-KL 30351529 32 ISO 7380 M6x20-10.9 12 10027182 M5 x 7 10018493 - - 168

30414763 Tools with ISO elements Accessories and spare parts Cartridges and compact cartridges Fastening screw for cartridge Axial setting screw Radial setting screw Clamping screw for indexable insert Backing plate Fastening screw for backing plate Backing plate right Backing plate left Fastening screw for backing plate Ordering description Backing Plate Ordering description Backing Plate Ordering description Countersunk Screw Tightening torque [Nm] UR 12-1A 10022309 UL 12-1A 10022310 ISO 10642-M3X8-10.9 1,8 10003769 UR 08-1A 10022305 UL 08-1A 10022306 ISO 10642-M3X6-10.9 1,8 10003768 UR 08-1A 10022305 UL 08-1A 10022306 ISO 10642-M3X6-10.9 1,8 10003768 UR 10-1A 10015042 UL 10-1A 10022304 ISO 10642-M3X8-10.9 1,8 10003769 UR 10-1A 10015042 UL 10-1A 10022304 ISO 10642-M3X8-10.9 1,8 10003769 UR 12-1A 10022309 UL 12-1A 10022310 ISO 10642-M3X8-10.9 1,8 10003769 UR 12-1K 30035042 UL 12-1K 30035050 ISO 10642-M3X8-10.9 1,8 10003769 UR 12-2K 30035043 UL 12-2K 30035051 ISO 10642-M3X8-10.9 1,8 10003769 UR 06-1K 30035024 UL 06-1K 30035044 ISO 2009-M2X4-4.8 0,5 10029153 UR 06-2K 30035025 UL 06-2K 30035045 ISO 2009-M2X4-4.8 0,5 10029153 UR 10-1K 30035029 UL101K 30035047 ISO 10642-M3X8-10.9 1,8 10003769 UR 12-1K 30035042 UL 12-1K 30035050 ISO 10642-M3X8-10.9 1,8 10003769 UR 08-1K 30035028 UL 08-1K 30035046 ISO 10642-M3X6-10.9 1,8 10003768 UR 10-1K 30035029 UL 10-1K 30035047 ISO 10642-M3X8-10.9 1,8 10003769 UR 10-2K 30035040 UL 10-2K 30035048 ISO 10642-M3X8-10.9 1,8 10003769 UR 10-3K 30035041 UL 10-3K 30035049 ISO 10642-M3X8-10.9 1,8 10003769 UR 06-1K 30035024 UL 06-1K 30035044 ISO 2009-M2X4-4.8 0,5 10029153 UR 18-1T 30310606 - - ISO 10642-M3X8-10.9 1,8 10003769 UR 18-4T 30310845 - - ISO 10642-M3X8-10.9 1,8 10003769 UR 14-1T 30310601 - - ISO 10642-M3X8-10.9 1,8 10003769 UR 14-4T 30310844 - - ISO 10642-M3X8-10.9 1,8 10003769 UR 10-1T 30310598 - - ISO 10642-M3X8-10.9 1,8 10003769 UR 10-2T 30310599 - - ISO 10642-M3X8-10.9 1,8 10003769 UR 14-2T 30310602 - - ISO 10642-M3X8-10.9 1,8 10003769 UR 14-3T 30310604 - - ISO 10642-M3X8-10.9 1,8 10003769 UR 18-2T 30310607 - - ISO 10642-M3X8-10.9 1,8 10003769 UR 18-3T 30310608 - - ISO 10642-M3X8-10.9 1,8 10003769 - - - - - - - - - - - - - - UR 14-5T 30562278 - - ISO 10642-M3X8-10.9 1,8 10003769 UR 10-3T 30562279 - - ISO 10642-M3X8-10.9 1,8 10003769 - - - - - - - Accessories Spare parts 169

Tools with ISO elements Accessories and spare parts General accessories Screwdriver 30414763 sw l 2 Torx size sw l 1 Screwdriver Dimensions Model Hex wrench Dimensions Model l d Torx size l 1 l 2 60 3,5 6IP 30414758 60 3,5 7IP 30414759 60 3,5 8IP 30414760 60 4 9IP 30414761 TORX PLUS 80 4 10IP 30414763 80 4 15IP 30414764 100 4 20IP 30414766 100 4,5 25IP 30414767 60 3,5 8 10019467 TORX 80 4 15 10019469 Wrench size (sw) 46,5 15,5 1,5 10004870 ISO2936-X 52 18 2 10004356 l 1 Hexagonal T-keys Wrench size (sw) Short design Long design l 1 Specification l 1 2,5 100 10006233 200 10032722 3 100 MN5221-31 10006234 200 10025313 4 100 MN5221-32 10006235 200 10018010 5 100 MN5221-33 10006236 200 10013350 6 100 MN5221-34 10006237 8 100 MN5221-35 10006238 10 100 30353270 12 200 30353272 Dimensions in mm. 170

Tools with ISO elements Accessories and spare parts General accessories TorqueVario -STplus T-key torque wrench set 11-pieces Model: 5-14 Nm Supply includes Features 1 T-key torque wrench 1 Torque-Tplus Setter 1 universal bit holder 1/4" 3 TORX standard bits T25x25 / T30x25 / T40x25 3 standard hex bits 4.0x25 / 5.0x25 / 6.0x25 2 adapter bits for the sockets 1 Torque-Tplus adapter bit 1/4" 1 Torque-Tplus adapter bit 3/8" Delivery in stable metal box Tolerance ± 6 %, can be traced to national standards Numeric torque value indication on window scale Torque continuously adjustable Comfortable T-key with soft zones Click signal on reaching the torque set 30415173 TorqueVario -S torque screwdriver set 13-pieces Model: 1.0-5.0 Nm Supply includes Features 1 TorqueVario-S torque screwdriver 1 Torque Setter 1 universal bit holder 1/4" 5 TORX standard-bits T7x25 / T8x25 / T9x25 / T10x25 / T15x25 5 TORX PLUS standard-bits 7IPx25 / 8IPx25 / 9IPx25 / 10IPx25 / 15IPx25 Delivery in stable metal box Tolerance ± 6 %, can be traced to national standards Numeric torque value indication on window scale Torque continuously adjustable Ergonomic multiple component handle Click signal on reaching the torque set 30415174 Accessories Spare parts 171

172

Tools with ISO elements Technical appendix Technical appendix Important technical notes and background information on the MAPAL tools with ISO elements and in general on the boring and milling machining areas are given in the following. Sections for the individual tool groups here you will find general figures for the correct usage of the tools, handling notes, cutting data recommendations and also very specific information such as chip guiding stages on the individual milling tools. The section "Technical notes" also contains machining formulae, assistance with the calculation of cutting forces and an overview of the forms of wear on indexable inserts with suitable rectification measures. General machining formulae 174 Cutting parameters 175 Calculation of cutting forces 176 General figures for the minimum boring diameter 178 Handling notes for TFB fine boring tool system 180 Boring Cutting data recommendation for boring and turning 184 Cutting data recommendation for TFB and TSW 186 Milling Terminology and formulae 188 Technical information 190 Circular and helix milling 192 Handling notes ICM 90-Finishing 195 Handling notes milling cutter retaining screw 196 Cutting data recommendation 198 General Forms of wear on indexable inserts 202 173 Technical appendix

Tools with ISO elements Technical appendix General machining formulae, boring General machining formulae, boring Velocity and feed Spindle speed Cutting speed 1 n = [ ] min m v c = [ ] min v c 1000 n = D c D c n v c = 1000 Feed rate mm v f = [ ] min v f = f z z n Feed/tooth v f z = [ mm ] f f z = z n Feed/revolution mm f u = [ ] u f u = f z z Number of cutting edges z Cutting force Cutting force Fc F c = A k c = b h kc Fc in N kc in N/mm 2 Specific cutting force k k c = [ c 1.1 ] h mc 174

Tools with ISO elements Technical appendix Cutting parameters during boring Cutting parameters during, boring Along with the specific cutting force for the material, the cutting cross section A essentially defines the machining force. Feed element per cutting edge fz and cutting depth ap are key parameters here. The following relationships apply: Feed/revolution f u = [mm/u] f u = f z z The figure shows the cutting cross section A during boring. Setting angle Cutting width κ = [ ] b = [mm] σ κ = 2 a p b = sin κ A h σ Chipping thickness h = [mm] h = f z sin κ f b κ Cutting depth a p = [mm] (D d) a p = 2 a p d D Cutting cross section for boring A = [mm 2 ] (D d) f z A = 2 or A = a p f z 175 Technical appendix

Tools with ISO elements Technical appendix Calculation of cutting forces, boring Calculation of cutting forces, boring (simplified) ø 80 ø 72 pre-drilled Example calculation: Boring tool ø 80 mm; Z = 5; pre-drilled ø 72 mm κ = 90 Material: EN-GJL-250 kc1.1* = 1160 mc = 0.26 vc 200 m/min fz= 0.2 mm Blunting 30 % Basic formula Calculation Result 1. Spindle speed V c 1000 n = D 200 1000 n = 80 n = 800 1/min 2. Cutting depth (D d) a p = 2 (80 72) a p = 2 a p = 4 mm 3. Cutting cross section A = a p f z A = 4 mm 0,2 mm 5 A = 4 mm 2 4. Chipping thickness h = f z sin κ h = 0,2 mm sin90º h = 0,2 mm 5. Specific cutting force without blunting factor k c1.1 1160 k c = h mc k c = 0,2 0,26 k c = 1763 N/mm 2 with 30 % blunting: 1763 N/mm 2 1,3 = 2292 N/mm 2 6. Cutting force F c = A k c = b h kc F c = 4 mm 2 2292 N/mm 2 F c = 9,17 kn 7. Cutting torque dm = average diameter in metres 8. Cutting power d m 0,076 m M c = F c M c = 9167,3 N 2 2 M c = 348,3 Nm 2 n M P c c = 60s 2 800 min -1 348,3 Nm P c = 60s P c = 29,2 kw * Value for cutting force calculation, WTO GmbH 176 Note: The efficiency of the main spindle drive is not taken into account. Appropriate power calculations can be made by MAPAL.

Tools with ISO elements Technical appendix Calculation of cutting forces, boring Machine tool selection: Comparison with torque and output power of the machine tool Motor spindle (Figure 1) Torque (Nm) Power (kw) There follow two spindle speed/power diagrams. The number of teeth and cutting parameters are to be defined as a function of the machine. In the example calculation the machine with the motor spindle is unsuitable, as here at a spindle speed of 800 1/min a torque of 187 Nm and a power of approx. 20 kw is achieved (Figure 1). 630 400 200 160 187 Nm 100 % 35 kw 100 % 40 30 20 10 8 100 40 5 3,15 2 10 5 0,6 1000 1600 4000 10.000 Torque curve in Nm Power curve in kw Line to assist on reading the diagram Spindle speed (1/min) Solution: Either reduce number of teeth, reduce cutting speed and feed, divide cut between two tools or select more powerful machine (e.g. with geared spindle, (Figure 2). Geared spindle (Figure 2) Torque (Nm) 630 400 Nm 100 % 400 200 160 100 40 10 5 42 kw 100 % Power (kw) 40 30 20 10 8 5 3,15 2 0,6 The example diagrams are shown in a simplified form. 1000 1600 4000 10.000 Spindle speed (1/min) 177 Technical appendix

Tools with ISO elements Technical appendix Minimum boring diameter General figures for the minimum boring diameter radial as a function of the number of teeth and indexable insert ø min Z = 2 ø min Z = 5 κ ap ø min Radial boring cutting edges without arc shaped land Indexable insert form Indexable insert size No. of teeth Comment 0603 09T3 1204 S (90 ) C (80 ) T (60 ) Minimum boring diameter at κ 85 ø 17 ø 25 ø 28 1 ø 17 ø 25 ø 31 2 ø 23 ø 32 ø 39 3 ø 31 ø 43 ø 53 4 ø 51 ø 63 ø 73 5 0602 09T3 1204 Minimum boring diameter at κ 90 ø 17 ø 24 ø 28 1 ø 18 ø 26 ø 33 2 ø 23 ø 34 ø 41 3 ø 31 ø 45 ø 54 4 ø 49 ø 63 ø 77 5 06T1 0902 1102 16T3 Minimum boring diameter at κ 90 ø 15 ø 17 ø 17 ø 24 1 ø 18 ø 21 ø 24 ø 37 2 ø 21 ø 25 ø 28 ø 43 3 ø 27 ø 34 ø 37 ø 57 4 ø 37 ø 51 ø 67 ø 76 5 Suitable for through bore Suitable for 90 shoulder machining Suitable in some situations for through bore and 90 shoulder machining 178

Tools with ISO elements Technical appendix Minimum boring diameter General figures for the minimum boring diameter tangential as a function of the number of teeth and indexable insert ø min Z = 2 ø min Z = 5 κ a p ø min Tangential boring cutting edges without arc shaped land Indexable insert form Indexable insert size No. of teeth Comment 0603/0604 09T3/0905 1204/1206 C (80 ) Minimum boring diameter at κ 80 and 90 ø 28 ø 41 ø 54 1 ø 28 ø 41 ø 54 2 ø 30 ø 41 ø 54 3 ø 40 ø 56 ø 64 4 ø 59 ø 84 ø 94 5 Suitable for through bore and 90 shoulder machining Tangential boring cutting edges with arc shaped land Indexable insert form Indexable insert size No. of teeth Comment 0604 0905 1206 C (80 ) Minimum boring diameter at κ 80 and 90 ø 40 ø 65 ø 78 1 ø 40 ø 65 ø 78 2 ø 40 ø 65 ø 78 3 ø 41 ø 65 ø 78 4 ø 64 ø 86 ø 102 5 Suitable for through bore and 90 shoulder machining Tangential boring cutting edges with and without arc shaped land Indexable insert form Indexable insert size No. of teeth Comment 0604 0905 1206 F (70 ) W (80 ) Minimum boring diameter at κ 80 and 90 ø 22 ø 30 ø 40 1 ø 22 ø 30 ø 40 2 ø 31 ø 43 ø 53 3 ø 42 ø 56 ø 67 4 ø 64 ø 83 ø 99 5 0705 0906 Minimum boring diameter at κ 80 and 90 ø 37 ø 59,5 2 ø 40,5 ø 59,5 3 ø 54,5 ø 74,5 4 ø 79,5 ø 89,5 5 Suitable for through bore and 90 shoulder machining Suitable for through bore and 90 shoulder machining 179 Technical appendix

Tools with ISO elements Technical appendix Handling notes for TFB fine boring tool system Handling notes for TFB fine boring tool system Radial run-out alignment The handling notes describe the necessary steps for adjusting the MAPAL fine boring tool system comprising machine adapter, KS flange adapter and TFB fine boring head (see right). This task includes the alignment of the Module connection and the correct setting of the tangential indexable inserts using the MapJus fine adjustment feature. For straightforward, convenient, quick and precise setting, it is recommended to use a MAPAL setting fixture (UNISET-V vision, standard). Alignment 1. Clean connection on the setting fixture using a cloth and taper wiper, and check the face surfaces of the connections for indents or protrusions. If necessary dress using an oil stone. Insert machine adapter for the fine boring tool in the connection on the setting fixture. Insert KS flange adapter with KS clamping cartridge in the module on the machine adapter. 2. Tighten axial fastening screws for the KS flange adapter in the clockwise direction (approx. 2 Nm). 3. Fit TFB fine boring head in the HSK connection on the KS flange adapter. Result: The face connections on the KS flange adapter and the HSK connection on the fine boring head are in contact and the key block slots on the tool are engaged. 4. Note: The TFB fine boring head is labelled with the recommended tightening torque. Tighten clamping screw on the HSK connection in the clockwise direction (for tightening torque see Table 1). Relieve the four radial adjusting screws on the module connection. 5. Rough alignment Determine radial run-out error on the KS flange adapter: Place measuring sensor against the surface for checking the radial run-out on the flange adapter and then rotate the tool. Turn the radial adjusting screws in the clockwise direction until the radial run-out error is 5 μm. After making the setting, relieve the adjusting screws. 6. Tighten axial fastening screws in the clockwise direction to 50 % of the stipulated tightening torque (see Table 2). Table 1: Tightening torque and clamping force for the HSK nominal sizes Nominal size Tightening torque [Nm] Clamping force [kn] HSK 50 HSK 63 HSK 80 HSK 100 15 20 30 50 21 30 40 50 180

Tools with ISO elements Technical appendix Handling notes for TFB fine boring tool system 4 5 6 7 8 1 Machine adapter 2 KS flange adapter 3 TFB fine boring head 4 Radial adjusting screw 5 Fastening screw 6 Axial angular alignment screw 7 Clamping screw for the HSK connection 8 KS clamping cartridge 1 2 3 7. Fine alignment Note: After fine alignment the radial run-out error must be < 3 μm. Determine radial run-out error on the KS flange adapter by placing the measuring sensor against the surface for checking the radial run-out and rotating the tool. At the surface for checking the radial run-out, turn the four radial adjusting screws clockwise until the radial run-out error is < 3 μm. Relieve the four radial adjusting screws. 8. Correct angular error Determine radial run-out error on the TFB fine boring head by placing the measuring sensor against the surface for checking the radial run-out on the fine boring head and rotating the tool. If the dial gauge at the position for checking the radial run-out on the fine boring head indicates a fluctuating radial run-out > 3 μm, there is an angular error (see step 9). If there is no angular error, see step 10. 9. Correct angular error Set indication (dial gauge) to "zero" at the position of largest deflection on the surface for checking the radial run-out on the fine boring head. Note: Lock setting fixture's spindle. Turn the axial angular alignment screws on KS flange adapter diagonally in the clockwise direction until the radial run-out error on the TFB fine boring head is < 3 μm. Note: The axial alignment screws must not be relieved after actuation! Result: The angular error has been corrected. 10. Tighten axial fastening screws to the stipulated tightening torque in the clockwise direction (see Table 2). Check again at the surfaces for checking the radial run-out on the TFB fine boring head and the KS flange adapter whether the radial run-out error is < 3 μm. Note: Once the full tightening torque has been reached, no further radial run-out correction is allowed to be made. Slightly tighten radial adjusting screws. Table 2: Tightening torque for Module sizes and fastening screws You will receive the complete instructions on the alignment of the TFB fine boring tool on the purchase of the tool. A PDF version of the complete instructions is also available in the download area at www.mapal.com! Module size Fastening screw Tightening torque M060 M080 M100 M140 4xM6 4xM6 4xM8 4xM10 20 Nm 20 Nm 36 Nm 72 Nm 181 Technical appendix

Tools with ISO elements Technical appendix Handling notes for TFB fine boring head Handling notes TFB fine boring head Changing and setting indexable inserts To be able to achieve very high accuracies on machining bores, MAPAL uses a special adjusting system on the TFB fine boring tool system. Adjustment to the μm is a special feature of this system and makes the replacement of the indexable inserts straightforward and reliable. Changing and setting tangential indexable insert 1. Turn threaded spindle on the MapJus fine adjustment feature one turn counter clockwise using a hex-wrench. 2. Undo TORX PLUS clamping screw for the tangential indexable insert and remove tangential indexable insert from the insert seat. 3. Clean tangential indexable insert and insert seat using compressed air. Turn tangential indexable insert or fit a new indexable insert in the insert seat. Fit TORX PLUS clamping screw in the tangential indexable insert and tighten to 1.5 Nm using a torque wrench. 4. Turn threaded spindle on the MapJus fine adjustment feature 1/2 turn clockwise using a hex-wrench. In this way the necessary preload is generated in the adjusting system. Result: The tangential indexable insert has been changed. 5. Move measuring sensor to the setting pad. Determine highest radial measuring point on the setting pad: turn tool and at the same time monitor the measured data on the display. Move measuring sensor to the highest axial point on the setting pad. Leave tool at the highest measuring point on the setting pad. Set indication (dial gauge) to "zero" at the highest measuring point. 6. Turn tool until tangential indexable insert is in contact with the measuring sensor. Turn tool until the highest radial cutting point on the tangential indexable insert is reached. Move measuring sensor axially until the highest axial cutting point on the tangential indexable insert is reached. 182

Tools with ISO elements Technical appendix Handling notes for TFB fine boring head 1 2 6 5 3 4 1 Setting pad 2 MapJus fine adjustment feature 3 Tangential indexable insert 4 TORX PLUS clamping screw 5 Adjusting wedge 6 Threaded spindle 7. Tighten TORX PLUS clamping screw clockwise to 3 3.5 Nm using a torque wrench. 8. Note The TFB tools are labelled with the reference pad diameter. Maintain a minimum overhang of 30 μm from the cutting edge to the reference pad. Set required machining diameter: turn clockwise using a hex-wrench on the threaded spindle on the MapJus fine adjustment feature until the indication (dial gauge) indicates the required cutting edge setting dimension. Repeat steps 5 to 8 for the remaining tangential indexable inserts. Result: The tangential indexable inserts have been set to the stipulated machining diameter. Attention: After alignment in the setting fixture, the radial run-out of the tool in the machine tool must also be checked to ensure there is no error in the shape of the bore. In general the following applies: the more exact the setting, the more exact the bore! If there is a radial run-out error on the machine spindle, it may be necessary to re-adjust the radial run-out and angular adjustment on the machine. 183 Technical appendix

Tools with ISO elements Technical appendix Cutting data recommendation for boring and turning Cutting data recommendation for boring and turning Cutting speed Note: Values for feed f [mm/z]. See overview of chip guiding stages page 82-87. Strength [N/mm 2 ] Hardness [HB] Cutting speed v c [m/min] Uncoated carbide Carbide CVD-coated Material HU615 HU810 HC840 HC841 HC851 HC852 HC861 HC862 HP118 HP182 Non-alloy steels, cast steel Up to 600 N/mm 2 Over 600 N/mm 2 120-200 100-150 80-180 100-160 100-150 60-160 P Up to 1000 N/mm 2 100-150 80-130 60-150 Alloyed steels Over 1000 N/mm 2 80-120 70-120 60-120 Stainless steels austenitic Up to 850 N/mm 2 100-180 100-180 60-120 M Stainless steels - martensitic Up to 1100 N/mm 2 60-120 60-120 40-100 Special alloys (Hasteloy, Inconel,...) Up to 1200 N/mm 2 10-50 20-80 20-80 20-60 K1 Grey cast iron, alloyed grey cast iron Up to 250 HB Over 250 HB 120-180 100-180 100-200 100-180 K2 Spheroidal cast iron, vermicular graphite cast iron, malleable cast iron Up to 500 N/mm 2 Over 500 N/mm 2 120-180 100-150 120-180 100-150 Aluminium (Si-content < 3 %) 150-500 150-400 N Aluminium (Si-content < 12 %) Aluminium (Si-content > 12 %) 100-450 100-400 80-300 100-300 Copper, brass, bronze 100-250 100-300 S Titanium alloys 30-70 184

Tools with ISO elements Technical appendix Cutting data recommendation for boring and turning Cutting speed v c [m/min] Carbide PVD-coated Ceramic Cermet CVDcoated Cermet PVD-coated PcBN PCD HP350 HP382 HP454 HP455 HP615 HP718 KU450 CC111 CP130 CP131 CP871 CP872 FU430 PU617 PU620 80-180 100-650 160-230 200-300 100-200 60-160 100-600 160-230 120-220 100-200 60-150 100-500 160-230 120-180 _ 60-120 100-400 160-230 120-180 _ 60-120 100-500 40-100 100-450 20-60 120-230 120-250 120-250 500-800 150-250 400-1000 100-200 100-220 100-220 400-700 150-250 350-800 100-200 100-200 100-200 120-220 80-180 80-180 80-180 120-200 150-600 300-1500 300-1500 100-500 200-1200 200-1200 100-400 150-1000 150-1000 100-350 100-600 100-600 30-70 185 Technical appendix

Tools with ISO elements Technical appendix Cutting data recommendation for tangential fine boring tools TFB Cutting data recommendation for tangential roughing tools TSW Roughing Medium machining Strength [N/mm 2 ] Hardness [HB] Cutting speed Recommended feed Cutting speed Recommended feed v c [m/min] v c [m/min] Per cutting edge v c [m/min] v c [m/min] Per cutting edge Material Carbide Ceramic + PcBN f z [mm] Carbide Ceramic + PcBN f z [mm] Non-alloy steels, cast steel Up to 600 N/mm 2 Over 600 N/mm 2 80-150 0,2-0,35 100-165 0,2-0,35 80-150 0,25-0,35 100-165 0,2-0,35 P Up to 1000 N/mm 2 80-130 0,2-0,35 90-140 0,15-0,3 Alloyed steels Over 1000 N/mm 2 50-120 0,2-0,35 80-130 0,15-0,3 Stainless steels austenitic Up to 850 N/mm 2 40-100 0,15-0,3 50-120 0,15-0,3 M Stainless steels - martensitic Up to 1100 N/mm 2 40-80 0,2-0,35 50-90 0,15-0,3 Special alloys (Hasteloy, Inconel,...) Up to 1200 N/mm 2 20-80 0,1-0,2 20-80 0,1-0,25 K1 Grey cast iron, alloyed grey cast iron Up to 250 HB Over 250 HB 120-220 500-800 0,15-0,4 140-220 500-800 0,1-0,3 120-200 500-800 0,15-0,4 140-200 400-700 0,1-0,3 K2 Spheroidal cast iron, vermicular graphite cast iron, malleable cast iron Up to 500 N/mm 2 Over 500 N/mm 2 120-185 0,15-0,35 140-185 0,1-0,3 120-185 0,15-0,35 140-185 0,1-0,3 Aluminium (Si-content < 3 %) 200-400 0,15-0,35 200-400 0,1-0,3 N Aluminium (Si-content < 12 %) Aluminium (Si-content > 12 %) 250-400 0,15-0,35 250-400 0,1-0,3 Copper, brass, bronze 75-250 0,15-0,35 75-250 0,1-0,3 S Titanium alloys 35-75 0,08-0,25 35-75 0,05-0,25 186

Tools with ISO elements Technical appendix Cutting data recommendation for tangential roughing tools TSW Cutting data recommendation for tangential fine boring tools TFB Finishing Strength [N/mm 2 ] Hardness [HB] Cutting speed Recommended feed v c [m/min] v c [m/min] v c [m/min] v c [m/min] Per cutting edge Carbide Cermet PCD PcBN f z [mm] Material Non-alloy steels, cast steel Up to 600 N/mm 2 Over 600 N/mm 2 100-220 160-230 0,15-0,35 100-220 160-230 0,15-0,35 P Alloyed steels Up to 1000 N/ mm 2 100-200 160-230 0,15-0,35 Over 1000 N/mm 2 100-200 160-230 0,15-0,35 Stainless steels austenitic Up to 850 N/mm 2 50-120 0,15-0,3 M Stainless steels - martensitic Up to 1100 N/mm 2 50-90 0,15-0,3 Special alloys (Hasteloy, Inconel,...) Up to 1200 N/ mm 2 20-80 0,15-0,3 K1 Grey cast iron, alloyed grey cast iron Up to 250 HB Over 250 HB 140-200 180-250 500-800 0,15-0,35 140-200 180-250 400-700 0,15-0,35 K2 Up to 500 N/mm 2 Spheroidal cast iron, vermicular graphite cast iron, malleable cast iron Over 500 N/mm 2 140-200 160-240 0,15-0,3 140-200 160-240 0,15-0,3 Aluminium (Si-content < 3 %) 250-400 300-1500 0,15-0,35 N Aluminium (Si-content < 12 %) Aluminium (Si-content > 12 %) 250-400 200-1200 0,15-0,35 180-350 200-1000 0,15-0,35 Copper, brass, bronze 75-160 100-600 0,15-0,35 S Titanium alloys 35-75 187 Technical appendix

Tools with ISO elements Technical appendix Terminology and formulae milling Terminology and formulae, milling Milling cutter diameter Dc [mm] Setting angle κ A A 90 B 75 D c Average roughness Ra [µm] Cutting depth ap [mm] Average roughness depth Rz [µm] Contact width ae [mm] Number of cutting edges z a p a p Spindle speed n [U/min] a e a e Formulae Feed per turn mm f u = [ ] U f u = z f z Feed per tooth mm f z = [ ] tooth v f f z = n z fz during face milling: 5 432 1 5 1 4 f z 2 3 f u 188

Tools with ISO elements Technical appendix Terminology and formulae milling Spindle speed Average chip thickness Cutting speed 1 n = [ ] min h m = [ mm ] m v c = [ ] min vc 1000 n = D a e h m = sinκ f z D D c n v c = 1000 Feed rate mm v f = [ ] min v f = fz z n Material removal rate cm Q = [ 3 ] min Q = a e a p v f Disc, groove, shoulder milling Feed value compensation fz 0,1 Machining steps with low radial cutting depth such as disc milling, groove milling or milling a shoulder require correction of the feed at the cutting edge as it enters the workpiece. The calculated and actual feed can vary depending on the cutting depth and the milling cutter diameter. 0,02 0,04 0,09 0.5 1.5 5 10 20 If a shoulder with a cutting depth of only 0.5 mm is machined using a milling cutter ø 40, the feed must be multiplied with a factor of 5 to arrive at the actual feed or fz 0.1 (see example below). 0,07 Example: A major advantage of the application of this formula is the increase in the productivity on the effective usage of the milling cutter. Tool: Milling cutter ø 40 mm z: 5 fz: 0,1 mm/rev f: 0.5 mm/rev Radial cutting depth [a p ] Feed per tooth [f z ] Maximum chip thickness [h max ] Required v f to obtain f z 0.1 Increase factor 20 0,1 0,1 1.000 1,00 10 0,1 0,09 1.111 1,11 5 0,1 0,07 1.429 1,43 1,5 0,1 0,04 2.500 2,50 0,5 0,1 0,02 5.000 5,00 Note: Based on the above example, the feed per tooth can be increased with a low ap/d ratio or a setting angle < 90. 189 Technical appendix

Tools with ISO elements Technical appendix Technical information milling Technical information milling Selection of the setting angle κ = 90 κ = <90 Advantages: For thin-walled workpieces For poorly clamped workpieces For 90 shoulder machining Disadvantages: Highest radial forces Sudden high load on entering the material Increased probability of the formation of burrs as the cutting edge exits Advantages: For general milling applications Good ratio of cutting edge size to maximum cutting depth Reduced sudden load on the cutting edge on entering the material Disadvantages: Higher radial forces can cause problems in case of low power machines or poorly clamped workpieces The milling cutter diameter and the milling cutter position The milling cutter diameter is to be selected as a function of the size of the workpiece size or the width of the workpiece as well as the power of the machine. During face milling, e.g. the milling cutter diameter should be 20 % - 50 % larger than the cutting width on the workpiece. Optimal milling cutter diameter The position of the milling cutter and the cutting edge contact on entering and exiting the workpiece affect the machining result. Optimal position A e A e 1,2-1,5 x A e D c = A e 190

Tools with ISO elements Technical appendix Technical information milling Differentiation based on running direction Counter feed milling Synchronous milling (preferred) On the entry of the cutting edge into the chip-removing cut, the cutting edge has the unfavourable chipping thickness zero and leaves the material with the maximum chipping thickness hmax. Friction is produced during counter feed milling. This friction results in chip bonding and the transfer of heat to the insert and to the workpiece. In the case of counter feed milling the resulting forces are against the direction of feed. It is likely that material strain hardening will occur. Synchronous milling is generally recommended. On entry into the material the cutting edge has a specific feed per tooth and with a maximum chipping thickness hmax generates a chip that becomes thinner on exiting the chip-removing cut. This aspect reduces the heat due to the transmission in the chip. The material strain hardening is minimised. Production of surfaces Axially produced surfaces: During face milling the surface quality is primarily generated by the cutting edge geometry and the feed. Improvement in the surface quality: Compared to a conventional cutting edge geometry, with a wide face indexable insert a Ra and Rz value several times better is achieved with the same feed. Standard geometry Wide finishing geometry R R R t R t f z f z 191 Technical appendix

Tools with ISO elements Technical appendix Circular milling Circular milling Circular milling with two-axis feed rate Feed rate at the cutting edge (at the contour) vf [mm/min] Feed rate at the centre of the tool (at tool centre) vfm [mm/min] Circular milling external machining Circular milling internal machining D d d D V f V fm V f V fm D + d v fm = v f D D d v fm = v f D Moving in and out On moving in or out the contour should always be approached or left over a quarter or semi-circle. This action will ensure tangential plunging or removal of the tool from the workpiece. In this way dwell marks on the workpiece are avoided and better circularity of the part machined achieved. 192

α Tools with ISO elements Technical appendix Circular milling Two axis angled entry linear (flute) Peripheral cutting edge Face cutting edge Inner cutting edge (trailing) a c b Ramp angle α: The maximum plunge angle α is dependent on the tool. Application notes For end milling cutter ICM90-B2-Shank In case of two-axis angled entry various machining processes take place at the same time: a) Machining at the entire periphery of the tool (peripheral machining) with leading indexable insert b) Machining at the face of the milling cutter with leading insert c) Machining at the face of the milling cutter with trailing insert Plunge milling α Milling cutter Indexable insert that Maximum ramp diameter can be used angle α ø 16, ø 18 3 ø 20 Type BDMT11T3 5 ø 22, ø 25 2,5 ø 28, ø 32 Type BDGT11T3 1,5 ø 40 0,7 ø 25 8 ø 32 Type BDMT1704 5 ø 40 Type BDGT1704 2,5 ø 50 or more Not recommended Vertical milling Milling cutter diameter Indexable insert that can be used Max. cutting width ae Modified milling cutter type M ICM90-B2-Shank, ICM90-B2, ISM90-B2-Shank, ISM90-B2. a e ø 16 ø 20 - ø 40 Type BDMT11T3 Type BDGT11T3 Type BDMT11T3 Type BDGT11T3 1,5 mm 5 mm If indexable inserts with a radius >1.2 mm are used, the tool body must be reworded at the peripheral edge as per the table shown. In this case the modified milling cutter type M can be selected (see section Milling pages 49-53) Alternatively the standard milling cutter can also be ordered and re-worked by the customer. ø 25 - ø 40 For shoulder cutter head ICM90-B2 Plunge milling Milling cutter diameter Type BDMT1704 Type BDGT1704 Indexable insert that can be used 8 mm Maximum ramp angle α Standard Re-worked α ø 40 2,5 Type BDMT1704 Type BDGT1704 ø 50 or more Not recommended Vertical milling Milling cutter diameter Indexable insert that can be used Maximum cutting width a e Indexable insert radius Radius required on the tool body 2,0 1,0 3,1 1,6 4,0 2,5 a e ø 25 - ø 40 Type BDMT1704 Type BDGT1704 8 mm 193 Technical appendix

Tools with ISO elements Technical appendix Helix milling Helix milling Helical angled entry Helical angled entry is an alternative to drilling. During this process a circular movement is made with simultaneous axial feed. Pitch (P): The pitch (P) corresponds to the axial material removal rate per revolution. This aspect is dependent on the workpiece, tool length, material and machine. P Advantages compare to circular milling Better circularity and concentricity Better cutting behaviour on applications susceptible to vibration Constant angled entry into the workpiece The milling cutter is continuously engaged, no entering or exiting per revolution compared to circular milling Application note α Tool ø Max. possible plunge angle α 80 4,3 100 3,4 125 2,8 140 2,4 160 2,1 Selection of the milling cutter diameter as a function of the size of the bore In the case of centre-cutting milling cutters it is important to select the correct ratio of milling cutter diameter and bore diameter. The insert must cut along the centre axis. If the milling cutter diameter is too small, there is a core in the centre. If the milling cutter diameter is too large, the centre is not machined. As a result a protrusion is left. This protrusion presses the milling cutter axially. There is a collision between the workpiece and tool. 1 2 1 Drilling into the solid (flat bottom of the bore) Milling cutter diameter (mm) Bore diameter (mm) 80 100 125 140 160 142-160 182-200 232-250 262-280 302-320 Note: In the case of a bore diameter between the ranges stated, for example 170 mm, the smaller milling cutter with a diameter of 80 mm is selected. Two machining steps are then necessary to machine the bore. 2 Enlarging a bore (no face machining) Milling cutter diameter = < 0.5 x bore diameter 194

Tools with ISO elements Technical appendix Handling notes ICM 90-Finishing Handling notes ICM90-Finishing Mounting and setting indexable inserts Condition as delivered (without indexable insert). 1. Unscrew TORX clamping screws and clean indexable insert seat if necessary. 2. Using a hex-wrench unscrew counter clockwise the adjusting wedge to approx. 1 mm above the tool body. 3. Fit indexable insert and TORX clamping screw and tighten clockwise to 2.8 Nm using a TORX torque wrench. 4. Screw in adjusting wedge clockwise using a hexwrench until it is in contact with the indexable insert. 5. Identify highest indexable insert in the fixed insert seat and zero dial gauge. 6. Turn tool until the finishing insert is in the measuring position. Move to highest radial cutting point. 7. By turning the threaded spindle for the adjusting element clockwise, adjust the wide finishing insert to 0.02 mm - maximum 0.04 mm overhang in relation to the highest indexable insert in the fixed insert seat. The wide finishing inserts should be set to < 5 µm axially in relation to each other. Information: The required preload on the indexable insert is generated by the adjusting element. 195 Technical appendix

Tools with ISO elements Technical appendix Handling notes milling cutter retaining screw Milling cutter retaining screw for the highest clamping force and reliability Threaded ring Threaded bolt Areas of application: Disk milling cutter with arbor Higher cutting force when machining High torques Advantages: Very high clamping force Greater reliability through the different thread pitches in contact with threaded bolt Self-locking No risk of injury through slipping wrenches High cost effectiveness thanks to greater circular and face run-out of the milling cutter 196

Tools with ISO elements Technical appendix Handling notes milling cutter retaining screw Handling notes Tool clamping 1. Remove drive ring from milling cutter arbor. 2. Install key block in milling cutter arbor. Note: Spacers are not included in scope of delivery. See capital accessories and spare parts page 161. 3. Place first spacer on milling cutter arbor. Note: Spacers are not included in scope of delivery. See capital accessories and spare parts page 161. 5. Place tool on face surface of milling cutter arbor. 4. Place second spacer on first spacer and milling cutter arbor. Mount and set milling cutter retaining screw 6. Rotate thread bolt so long that a 2 mm overhang to the threaded ring is reached. Tightening torque for milling cutter retaining screws Retaining Screw For milling cutter arbor-ø [mm] Dimensions M 7. Lightly turn the milling cutter retaining screw into the milling cutter arbor in a clockwise direction. Wrench size Tightening Torque [Nm] 10041356 16 M8 5 28 10009642 22 M10 6 50 10006125 27 M12 8 70 10009686 32 M16 10 95 10006126 40 M20 12 125 8. Turn the milling cutter retaining screw further in a clockwise direction into the milling cutter using an allen key and tighten to the tighten torque given in the tighten torque table. Result: Milling cutter retaining screw is tightened to the correct tightening torque and rest on the face of the tool. Note: To be used only by trained personnel. 197

Tools with ISO elements Technical appendix Cutting data recommendation for milling Cutting data recommendation for milling Cutting speed Cutting speed Strength [N/mm 2 ] Hardness [HB] v c [m/min] Uncoated carbide Carbide PVD-coated Material HU615 HU810 HU825 HP350 HP382 HP615 HP718 HP883 HP890 Non-alloy steels, cast steel Up to 600 N/mm 2 Over 600 N/mm 2 100-200 100-200 100-200 100-200 100-200 100-200 P Up to 1000 N/mm 2 100-180 100-180 100-180 Alloyed steels Over 1000 N/mm 2 80-150 80-150 80-150 Stainless steels austenitic Up to 850 N/mm 2 60-160 120-200 M Stainless steels - martensitic Up to 1100 N/mm 2 60-120 80-150 Special alloys (Hasteloy, Inconel,...) Up to 1200 N/mm 2 20-40 K1 Grey cast iron, alloyed grey cast iron Up to 250 HB Over 250 HB 100-250 100-200 100-250 100-180 K2 Spheroidal cast iron, vermicular graphite cast iron, malleable cast iron Up to 500 N/mm 2 Over 500 N/mm 2 80-200 80-160 80-160 80-160 Aluminium (Si-content < 3 %) 100-500 100-300 100-300 100-700 N Aluminium (Si-content < 12 %) Aluminium (Si-content > 12 %) 100-500 100-300 100-300 100-700 100-300 100-280 100-280 100-500 Copper, brass, bronze 100-300 100-280 100-280 100-300 S Titanium alloys 10-40 10-40 20-70 20-50 198

Tools with ISO elements Technical appendix Cutting data recommendation for milling PcBN PCD FU430 PU617 PU620 300-800 300-800 300-600 300-600 500-1500 500-1500 500-1500 500-1500 500-1000 500-1000 100-500 100-500 199 Technical appendix

Tools with ISO elements Technical appendix Cutting data recommendation for milling Cutting data recommendation for milling Feed per tooth Face cutter head with tangential technology IFM75-C2 Indexable insert Chip guiding stage Edge rounding Feed/tooth (mm) D00 D01 D02 D03 D61 D67 D81 D87 CTHD CTHD CTHD/CTND CTND CTHD CTHD CTHD CTHD 0 + ++ +++ + + + + P 0,1-0,25 0,1-0,25 M 0,08-0,2 K 0,08-0,4 0,1-0,4 0,05-0,4 0,05-0,4 N 0,05-0,5 0,05-0,5 0,05-0,5 0,05-0,5 S 0,05-0,2 0,08-0,2 IFM75-C2 Indexable insert Chip guiding stage Edge rounding Feed/tooth (mm) H03 H12 H21 H22 A61 A67 A81 A87 CTHQ CTHQ CTHQ CTHQ CTHQ CTHQ CTHQ CTHQ +++ ++ + ++ + + + + P 0,1-0,25 M 0,08-0,2 K 0,08-0,3 0,05-0,3 0,05-0,3 N 0,08-0,4 0,05-0,4 0,08-0,4 0,05-0,4 0,05-0,4 S 0,08-0,2 Shoulder cutter head with tangential technology ICM90-C2 Indexable insert ICM90-C2-Finishing Chip guiding stage Edge rounding Feed/tooth (mm) D00 D01 D02 D03 D61 D67 D81 D87 CTHD CTHD CTHD/CTND CTND CTHD CTHD CTHD CTHD 0 + ++ +++ + + + + P 0,1-0,25 0,1-0,25 M 0,08-0,2 K 0,08-0,4 0,1-0,4 0,05-0,4 0,05-0,4 N 0,05-0,5 0,05-0,5 0,05-0,5 0,05-0,5 S 0,05-0,2 0,08-0,2 ICM90-C2-Finishing 200 Optional wide face indexable insert Chip guiding stage* Edge rounding Feed/tooth (mm) H25 H26 D81 D87 CTHA CTHA CTHA CTHA 0 + + + P 0,1-0,25 M 0,08-0,2 K 0,05-0,4 0,05-0,4 0,05-0,4 N 0,05-0,5 0,05-0,5 0,05-0,5 S 0,05-0,2

Tools with ISO elements Technical appendix Cutting data recommendation for milling 0 = Sharp edged + = Slightly rounded ++ = Medium rounded +++ = Heavily rounded Shoulder cutter head with tangential technology ICM90-C4 Indexable insert ICM90-C4-Finishing Chip guiding stage Edge rounding Feed/tooth (mm) H03 H12 H21 H22 A61 A67 A81 A87 CTHQ CTHQ CTHQ CTHQ CTHQ CTHQ CTHQ CTHQ +++ ++ + ++ + + + + P 0,1-0,25 M 0,08-0,2 K 0,08-0,3 0,05-0,3 0,05-0,3 N 0,08-0,4 0,05-0,4 0,08-0,4 0,05-0,4 0,05-0,4 S 0,08-0,2 ICM90-C4-Finishing Optional wide finishing indexable insert Chip guiding stage* Edge rounding Feed/tooth (mm) H25 H26 A81 A87 CTHH CTHH CTHH CTHH 0 + + + P 0,1-0,25 M 0,08-0,2 K 0,05-0,3 0,05-0,3 0,05-0,3 N 0,05-0,4 0,05-0,4 0,05-0,4 S 0,08-0,2 Shoulder cutter head with radial technology ICM90-S4 Indexable insert Chip guiding stage Edge rounding Feed/tooth (mm) M65 SEMT +++ P 0,15-0,25 M 0,15-0,2 K 0,15-0,25 N 0,15-0,25 S 0,15-0,2 * The feed/revolution (f u ) is calculated using the total number of teeth. 201 Technical appendix

Tools with ISO elements Technical appendix Cutting data recommendation for milling Cutting data recommendation for milling Feed per tooth End milling cutter with radial technology ICM90-B2-Shank Indexable insert Chip guiding stage Edge rounding Feed/tooth (mm) M70 R70 R72 R73 R74 U70 U71 BDMT BDMT BDMT BDMT BDMT BDGT BDGT ++ +++ +++ +++ +++ + 0 P 0,08-0,18 0,06-0,25 0,08-0,15 0,08-0,15 0,08-0,15 M 0,06-0,12 0,06-0,15 0,08-0,12 0,08-0,12 0,08-0,12 K 0,06-0,25 0,08-0,15 0,08-0,15 0,08-0,15 N 0,05-0,3 0,05-0,2 S 0,06-0,2 0,08-0,12 0,08-0,12 0,08-0,12 0,05-0,2 Shoulder cutter head with radial technology ICM90-B2 Indexable insert Chip guiding stage Edge rounding Feed/tooth (mm) M70 R70 R73 R74 U70 U71 BDMT BDMT BDMT BDMT BDGT BDGT ++ +++ +++ +++ + 0 P 0,08-0,18 0,06-0,25 0,08-0,15 0,08-0,15 M 0,06-0,12 0,06-0,15 0,08-0,12 0,08-0,12 K 0,06-0,25 0,08-0,15 0,08-0,15 N 0,05-0,3 0,05-0,2 S 0,06-0,2 0,08-0,12 0,08-0,12 0,05-0,2 Shell end face milling cutter with radial technology ISM90-B2-Shank Indexable insert Chip guiding stage Edge rounding Feed/tooth (mm) M70 R70 R72 R73 U70 U71 BDMT BDMT BDMT BDMT BDMT BDGT ++ +++ +++ +++ + 0 P 0,08-0,18 0,06-0,25 0,08-0,15 0,08-0,15 M 0,06-0,12 0,06-0,15 0,08-0,12 0,08-0,12 K 0,06-0,25 0,08-0,15 0,08-0,15 N 0,05-0,3 0,05-0,2 S 0,06-0,2 0,08-0,12 0,08-0,12 0,05-0,2 ISM90-B2 Indexable insert Chip guiding stage Edge rounding Feed/tooth (mm) M70 R70 R72 R73 U74 U70 U71 BDMT BDMT BDMT BDMT BDMT BDGT BDGT ++ +++ +++ +++ +++ + 0 P 0,08-0,18 0,06-0,25 0,08-0,15 0,08-0,15 0,08-0,15 M 0,06-0,12 0,06-0,15 0,08-0,12 0,08-0,12 0,08-0,12 K 0,06-0,25 0,08-0,15 0,08-0,15 0,08-0,15 N 0,05-0,3 0,05-0,2 S 0,06-0,2 0,08-0,12 0,08-0,12 0,08-0,12 0,05-0,2 202

Tools with ISO elements Technical appendix Cutting data recommendation for milling 0 = Sharp edged + = Slightly rounded ++ = Medium rounded +++ = Heavily rounded Shell end face milling cutter with tangential technology ISM90-C2-SK ISM90-C2-HSK Indexable insert Chip guiding stage Edge rounding Feed/tooth (mm) D00 D01 D02 D03 D81 D87 CTHD CTHD CTHD/CTND CTND CTHD CTHD 0 + ++ +++ + + P 0,1-0,25 0,1-0,25 M 0,08-0,2 K 0,08-0,4 0,1-0,4 0,05-0,3 N 0,05-0,5 0,05-0,5 0,05-0,4 S 0,05-0,2 0,08-0,2 ISM90-C4-SK ISM90-C4-HSK Indexable insert Chip guiding stage Edge rounding Feed/tooth (mm) H03 H12 H21 H22 A81 A87 CTHQ CTHQ CTHQ CTHQ CTHQ CTHQ +++ ++ + ++ + + P 0,1-0,25 M 0,08-0,2 K 0,08-0,3 0,05-0,3 N 0,08-0,4 0,05-0,4 0,08-0,4 0,05-0,4 S 0,08-0,2 Helix milling cutter with tangential technology IHM90-C2 IHM90-C2-HSK Indexable insert Chip guiding stage Edge rounding Feed/tooth (mm) D00 D01 D02 D03 D81 D87 CTHD CTHD CTHD/CTND CTND CTHD CTHD 0 + ++ +++ + + P 0,1-0,25 0,1-0,25 M 0,08-0,2 K 0,08-0,4 0,1-0,4 0,05-0,3 N 0,05-0,5 0,05-0,5 0,05-0,4 S 0,05-0,2 0,08-0,2 IHM90-C4 IHM90-C4-HSK Indexable insert Chip guiding stage Edge rounding Feed/tooth (mm) H03 H12 H21 H22 A81 A87 CTHQ CTHQ CTHQ CTHQ CTHQ CTHQ +++ ++ + ++ + + P 0,1-0,25 M 0,08-0,2 K 0,08-0,3 0,05-0,3 N 0,08-0,4 0,05-0,4 0,08-0,4 0,05-0,4 S 0,08-0,2 203 Technical appendix

Tools with ISO elements Technical appendix Cutting data recommendation for milling Cutting data recommendation for milling Feed per tooth Disc milling cutter with tangential technology IDM90-C2-L/R Indexable insert Chip guiding stage Edge rounding Feed/tooth (mm) D00 D01 D02 D03 D61 D67 D81 D87 CTHD CTHD CTHD/CTND CTND CTHD CTHD CTHD CTHD 0 + ++ +++ + + + + P 0,1-0,25 0,1-0,25 M 0,08-0,2 K 0,08-0,4 0,1-0,4 0,05-0,4 0,05-0,4 N 0,05-0,5 0,05-0,5 0,05-0,5 0,05-0,5 S 0,05-0,2 0,08-0,2 IDM90-C2-LR Indexable insert Chip guiding stage Edge rounding Feed/tooth (mm) D00 D01 D02 D03 D81 D87 CTHD CTHD CTHD/CTND CTND CTHD CTHD 0 + ++ +++ + + P 0,1-0,25 0,1-0,25 M 0,08-0,2 K 0,08-0,4 0,1-0,4 0,05-0,4 N 0,05-0,5 0,05-0,5 0,05-0,5 S 0,05-0,2 0,08-0,2 IDM90-C4-L/R Indexable insert Chip guiding stage Edge rounding Feed/tooth (mm) H03 H12 H21 H22 A61 A67 A81 A87 CTHQ CTHQ CTHQ CTHQ CTHQ CTHQ CTHQ CTHQ +++ ++ + ++ + + + + P 0,1-0,25 M 0,08-0,2 K 0,08-0,3 0,05-0,3 0,05-0,3 N 0,08-0,4 0,05-0,4 0,08-0,4 0,05-0,4 0,05-0,4 S 0,08-0,2 204

Tools with ISO elements Technical appendix Cutting data recommendation for milling 0 = Sharp edged + = Slightly rounded ++ = Medium rounded +++ = Heavily rounded Disc milling cutter with tangential technology IDM90-C4-L/R Indexable insert Chip guiding stage Edge rounding Feed/tooth (mm) H03 H12 H21 H22 A81 A87 CTHQ CTHQ CTHQ CTHQ CTHQ CTHQ +++ ++ + ++ + + P 0,1-0,25 M 0,08-0,2 K 0,08-0,3 0,05-0,3 N 0,08-0,4 0,05-0,4 0,08-0,4 0,05-0,4 S 0,08-0,2 IDM88-L8-L/R Indexable insert Chip guiding stage Edge rounding Feed/tooth (mm) H83 H93 LTHU LTHU +++ +++ P 0,1-0,3 0,15-0,3 M K 0,1-0,35 0,15-0,35 N S 205 Technical appendix

Tools with ISO elements Technical appendix Forms of wear Forms of wear on indexable inserts Form of wear Clearance surface wear tangential radial Rectification measures - Reduce cutting speed - Select more wear-resistant cutting material Crater wear tangential radial - Reduce feed - Reduce cutting speed - Select more wear-resistant cutting material - Use coolant Scoring tangential radial - Reduce cutting speed - Select smaller setting angle - Reduce feed Built-up edge tangential radial - Increase cutting speed - Increase feed - Select geometry with lighter cut (sharp cutting edges) Chipping tangential radial - Increase cutting speed - Reduce feed - Select more ductile type of carbide - Select stronger geometry - Improve stability (for example short tool) - Cooling, continuous or dry (avoid thermal shock) Cutting edge fracture tangential radial - Reduce feed - Reduce cutting depth - Select stronger indexable insert geometry - Select more ductile type of carbide - Select thicker insert 206

Tools with ISO elements Technical appendix 207 Technical appendix

Tools with ISO elements MAPAL competence worldwide MAPAL competence MAPAL is the major specialist for complete machining tasks. As a result MAPAL offers complete tool know-how for machining parts. The programme ranges from high-performance standard tools to complex custom tools. Absolute precision is the basis for the quality of MAPAL tools. The result is dependable tool concepts that ensure reliable manufacture. Excellent quality in relation to surface roughness, circularity, cylindricity and maximum tool lives are the consequence. 208