Technology Energy-efficient tool concepts
|
|
- Charleen Day
- 5 years ago
- Views:
Transcription
1 Technology Energy-efficient tool concepts Save energy and costs with intelligent process management
2 MAPAL technology: Our contribution to energy efficiency You do not need to be a great prophet to predict that energy costs and, in particular, electricity prices will continue to rise. In Germany industry needs more than 40 % of the entire consumption of the electrical power produced. Approximately 60 % of this usage is down to the operation of production machines. In the case of machine tools the energy necessary for machining is very low in comparison to the total energy required by the machine. On these machines there are a number of possible ways of increasing the energy efficiency, for example by using regulators and controllers to suit the specific task, as well as by using energy-saving units. However, these approaches often involve large investments or even new machines. On the other hand, a significant energy saving and therefore cost saving can be achieved with intelligent process optimisation on existing machines. changes can be saved. On the other hand, higher feed rates and the related shorter machine running time bring significant energy savings. The conversion to minimum quantity lubrication (MQL) or dry machining offers even more potential. Energy savings from 0 to 30 % can be achieved, as the units necessary to supply the cooling lubricant are not required. MAPAL also offers complete solutions for MQL technology from the clamping tool to the cutting edge. MAPAL specialists optimise the process management Of particular importance for energy efficiency is reduced machine running time, that is shorter machining time. On the one hand this objective can be achieved with reduced non-productive times. MAPAL s complete machining tools combine the machining of various bores, chamfers and flat surfaces such that often four, five or more tool Less non-productive time Higher speeds Modern Technology MAPAL +++ A medium-size machine tool consumes approx. 65,000 kwh* per year in three-shift operation. This signifies carbon dioxide emissions of 95 t CO* and corresponds to the emissions from 66 small cars covering a mileage of,000 km each. Due to high performance tools and optimised machining processes, 5 to 0 % of the total energy required can be saved. The energy required can be reduced by a further 0 to 30 %, for example by converting to MQL or dry machining * Sources: Zäh, M.; Niehues, K.: Wie viel Energie verbraucht eine Werkzeugmaschine? fertigung journal 09/009 date , page 30ff. Umweltbundesamt, FG I.5., date March 00
3 Energy-efficient tool concepts
4 Less non-productive time shorter processes MAPAL the specialist for combination tools The usage of combination tools is particularly effective for reducing the energy required and at the same time increasing productivity. During process design, MAPAL specialists always pay attention to combining as many machining operations as possible in one tool. As a result tool changes and travels, that is non-productive times, are saved. Also the total manufacturing time is significantly reduced by the simultaneous machining of various bores, chamfers and flat surfaces. This method of working also brings higher accuracies in relation to the concentricity and angle requirements, as on combination tools an offset between the diameters cannot occur. A further positive effect on the usage of combination tools is that stations are freed up in the tool magazine. Lower consumption due to combination tools. Combination tool for machining bores and for circular milling (suspension arm AlSi0Mg) First the diameter (4 H8 ) is fine machined from the cored state using a premachining stage and fine machining stage. Then the flat surfaces and chamfers on both sides of the workpiece are circular milled. Due to the soft cut of the tangential inserts during circular milling and the support from the guide pads during the machining of the bore, it was possible to combine the original two machining tasks. Savings/year (80,000 parts) 89 hrs 6,358 kwh Emissions: 3.7 t CO *. Complete machining using tangential technology and solid carbide drill (actuator GG5) Three tools were necessary to machine a connection and bearing bore in a grey cast iron housing. All machining steps were combined into a three-piece combination tool. It was possible to save a total of 6 sec. in non-productive time and productive time solely by using this tool. Savings/year (5,000 parts) hrs,440 kwh Emissions:.4 t CO * *(=,800 km in a car) *(= 3,00 km in a car) 4
5 Energy-efficient tool concepts The largest effects in relation to energy efficiency and increasing productivity can be achieved during the design and optimisation of complete machining processes. It is during this process that the MAPAL Tool Expert Team defines and plans the optimum tools and aids for the machining. All the documents and studies necessary for perfect tool planning are prepared. On request, the MAPAL tool experts will also supply specific NC programs and provide support during the breaking-in of the tools. In this way it was possible during process optimisation to save of the 80 tools required originally for a gearbox housing. The machining time was shortened by 5 % as a result with a corresponding reduction in the total energy required by the machine. Examples for increased energy efficiency and productivity (gearbox housing Al). PCD-tipped precision drilling tool in lightweight design Four tools combined in one tool. Maximum diameter 50 mm and nevertheless a low weight of only 5.7 kg due to titanium tool body. Feed rate of 900 mm/min. Savings/year (40,000 parts) 7 hrs 3,76 kwh Emissions:. t CO * *(= 8,00 km in a car). Guided fine boring tool for bearing and location bores to the micron Complete machining of seven different features diameters, chamfers, front faces. Compliance with the tightest tolerances with high productivity. Combination with insertion tool for further machining positions. It was possible to replace three tools. Savings/year (00,000 parts) 388 hrs 8,536 kwh Emissions: 4.9 t CO * *(= 4,00 km in a car) Advantages: Complete machining tools for shorter machine running times Saving in additional tools, magazine stations and changing times due to machining at various position Significant reduction in the total energy requirement of the machine 0 to 5 % are possible Energy saving without investment in new units and machines 5
6 Higher speeds MAPAL the specialist for high performance tools Newly developed tools from MAPAL, for example the MEGA-Speed-Drill or the FeedPlus reamers, are able to reduce the machining times by up to 70 %. On the MEGA-Speed-Drill the new arrangement of the guiding chamfers provides the crucial increase in cutting speed. On the other hand, the innovative design of the FeedPlus reamer makes it possible to accommodate significantly more blades than on conventional reamers, and as a result enormously increase the feed rate. A large number of PCD blades are also the key for high speeds and short machining times on the HP-FaceMill face milling cutter. Together with the cutting edge geometries optimised for low cutting forces, the total energy requirement for a machine tool can be reduced by up to 5 %. Examples of energy-efficient MAPAL high performance tools 3. MEGA-Speed-Drill for drilling in an axle housing (GG30) Due to the considerably reduced load on the guiding chamfers, the machining speed can be significantly increased. As a result 3 sec. can be saved on the 3 bores per part compared to a conventional carbide drill. The MEGA- Speed-Drill also brought a 7 % longer tool life. Savings/year (00,000 parts) 889 hrs 9,558 kwh Emissions:. t CO * *(= 94,500 km in a car). FeedPlus reamer for highest feed rates 8 teeth instead of the conventional eight that is how the FeedPlus reamer realises such high feed rates. 66 % less productive time is the result on machining a bronze bush in a rocker arm. 3. HP-FaceMill provides energy saving due to more PCD blades in a valve gear casing (Al) Due to the increased number of teeth, the feed rate can be more than doubled, for example during milling on valve gear casings made of aluminium. Shortest payback time ensured due to increase in the productivity and energy efficiency. Savings/year (400,000 parts) 4 hrs 9,84 kwh Emissions: 5.4 t CO * *(= 44,000 km in a car) Advantages: Energy required by machine drops in parallel with the shortened productive times Higher power consumption due to the use of several inserts not relevant MAPAL high performance tools in standard versions and custom versions Competent advice from experienced specialists Savings/year (50,000 parts) 39 hrs 858 kwh Emissions: 0.5 t CO * *(= 4,00 km in a car) 3 6
7 Energy-efficient tool concepts Modern technology MAPAL the specialist for minimum quantity lubrication and dry machining Minimum Quantity Lubrication (MQL) and dry machining are particularly important features for the energy efficiency of a machine tool. The reason is the high power consumption of the high pressure pumps required for the cooling lubricant. Often these devices make up 0 30 % of the total energy required by the machine. By converting a cylinder head machining operation to MQL, it was possible, for example, to completely do without a pump that operates in the pressure range up to 50 bar and that has a motor power rating of kw. Example cylinder head MQL project. PCD precision boring tool for the blind bores for valve seat and valve guide Due to the exact matching of the channel cross-sections, medium is reliably and evenly supplied to all cutting edges. A special supply guarantees a response time of <0. sec.. Double edge PCD tools for the injector and spark plug bores Despite the large difference in diameter from 7 to 6 mm, on these tools the chips are reliably removed from the bore without high pressure. Even at an air pressure of only bar, machining is reliable. 3. Guided fine boring tool for fine machining the camshaft bore Guide pads made of PCD and MQL outlets designed to suit the bearings guarantee correct function during this machining operation. Possible savings 33,000 kwh Emissions: 9 t CO * Due to the removal of a high pressure pump on a medium-sized machine tool in three-shift operation and with 30 % of the total running time as productive time. *(= 60,000 km in a car) Advantages: MQL or dry machining possible for all machining methods and in all materials Special quality controls for the MQL tools Complete range of clamping tools available for single and two-channel MQL supplies Demonstration and sample machining in the MAPAL technology centre 3 7
8 MAPAL the major specialist Reaming and fine boring Boring Drilling Milling Turning Actuating Clamping Setting and measuring Services V.0.0 MAPAL Präzisionswerkzeuge Dr. Kress KG P.O. Box 50 D Aalen Phone +49 (0) Fax +49 (0) ENE-E WD Printed in Germany. Right of technical modifications reserved.
Technology Workpieces and processes in the automotive industry
Technology Workpieces and processes in the automotive industry New machining solutions for that extra productivity and cost-effectiveness MAPAL technology: Tap the potential savings during the machining
More informationReaming. MAPAL MonoReam. Systematic versatility NEW
Reaming MAPAL MonoReam Systematic versatility NEW MAPAL MonoReam With the newly developed multi-bladed reamers in the 600, 700 and 800 series, MAPAL is offering a new, simple, highperformance, standardised
More informationReaming and fine boring. EasyAdjust-System Simpler, faster, more cost-effective
Reaming and fine boring EasyAdjust-System Simpler, faster, more cost-effective Never before it had been possible to adjust tools so fast and at such a precision. 2 MAPAL EasyAdjust-System Introduction
More informationMilling. CPMill ball track milling cutters. Easy handling and high precision NEW
Milling CPMill ball track milling cutters Easy handling and high precision NEW CPMill - Complete Performance Milling The new generation of MAPAL replaceable milling cutters for the machining of constant-velocity
More informationX3-Solutions for mobility
X3-s for mobility X3-s for mobility 3-SOLUTIONS FOR MOBILITY The mobility of people and goods is the deciding factor for life worldwide and is the motor for global economy. One of the greatest challenges
More informationKYOCERA UNIMERCO. PCD tools. UM DANDIA TM tooling solutions for the automotive industry
KYOCERA UNIMERCO PCD tools UM DANDIA TM tooling solutions for the automotive industry KYOCERA UNIMERCO your innovative partner KYOCERA UNIMERCO is specialised in the manufacture of high performance PCD
More informationBoring Milling. MAPAL competence Tools with ISO elements
Boring Milling MAPAL competence Tools with ISO elements Perfect machining technology MAPAL stands for innovative machining solutions with the highest quality, precision and cost-effectiveness. Starting
More informationLightweight HSC milling cutter for a perfect surface finish. flycutter - system eco
Lightweight HSC milling cutter for a perfect surface finish flycutter - system eco 2 milling FlyCutter - System Eco mapal FlyCutter - System Eco The FlyCutter series represent a new dimension in face milling
More informationSuccessful series production with minimum quantity lubrication
Successful series production with minimum quantity lubrication Prof. Dr.-Ing. Eckehard Kalhöfer Dipl.-Ing. Christian Schmidt MAPAL TECHNOLOGIEREPORT 01 03 12.2012 01.2014 Page 1 of 12 Minimum quantity
More informationIn hall 4, stand A42, you can experience Intelligence in Production. The following trade show highlights can be seen at EMO:
Guhring at EMO 2013 Intelligence in Production with precision tools from Guhring In the spirit of the motto of this year s EMO, from 16th to 21th September in Hanover, Guhring is introducing trendsetting
More informationNew generation of the PCD face milling cutters. EcoMill-Blue and RapidMill-Blue
New generation of the PCD face milling cutters EcoMill-Blue and RapidMill-Blue 2 EcoMill-Blue and RapidMill-Blue New generation of the PCD face milling cutters EcoMill-Blue and RapidMill-Blue New generation
More informationFor more detailed information, please visit hyperion.com.tr
For more detailed information, please visit www.hyperion.com.tr hyperion.com.tr From the dream to the truth... The way you wish, the time you wish. hyperion.com.tr HIGH PERFORMANCE PRECISION TOOLS WITH
More information42 May MAPAL dialog Innovative technologies in use. HP-FaceMill with PCD-blades. PCD-tipped HPR-Reamer. MAPAL twist drill MEGA-Speed- Drill
Page 1 MAPAL Impulse 42 May 2010 INFORMATIONS IDEAS INTERNALS MAPAL dialog Innovative technologies in use HP-FaceMill with PCD-blades MAPAL twist drill MEGA-Speed- Drill PCD-tipped HPR-Reamer Page 2 MAPAL
More informationHSS Specialists. Special design high speed steel drills for special machining tasks
HSS Specialists Special design high speed steel drills for special machining tasks Guhring s HSS Guhring has been a specialist in drilling tools for more than a century. This not only applies to the broad
More informationWind power Tooling solutions for all components and all materials from one source
Wind power Tooling solutions for all components and all materials from one source application specific tool materials and coatings innovative geometries for highest accuracy and quality intelligent special
More informationAutomotive solutions for ISO K
Automotive solutions for ISO K When machining in ISO K materials, you need tough tools that can withstand high abrasive wear and frittering, and deliver secure and precise machining again and again. This
More informationREP RT TECHNOLOGY. How does interpolation turning work? 01 Interpolation turning. Prof. Dr.-Ing. Eckehard Kalhöfer Dr.-Ing.
How does interpolation turning work? Prof. Dr.-Ing. Eckehard Kalhöfer Dr.-Ing. Dirk Sellmer MAPAL TECHNOLOGIEREPORT 01 12.2012 Page 1 of 8 TECHNOLOG Interpolation turning has been up until now a little-known
More informationRATIO. 60 % longer tool life. Ratio high-performance roughing cutter with flat knuckle-type teeth
INNOVATIONS 2017/2018 Ratio high-performance roughing cutter with flat knuckle-type teeth 60 % longer tool life The optimised roughing geometry with asymmetrical knuckles reduces the cutting pressure in
More informationCIRCULAR SAWS. Production system for grinding tooth faces/tooth tops and side angles CC 355
CIRCULAR SAWS Production system for grinding tooth faces/tooth tops and side angles CC 355 / CIRCULAR SAWS // TOOTH FACES/TOOTH TOPS AND SIDE ANGLES MAXIMUM FLEXIBILITY AND PRODUCTIVITY IN THE MANUFACTURE
More informationCHX 840 and CHX 1300 CIRCULAR SAW. Versatile sharpening machine for TCT circular saw blades up to 840 or 1300 mm in diameter
CHX 840 and CHX 1300 CIRCULAR SAW Versatile sharpening machine for TCT circular saw blades up to 840 or 1300 mm in diameter CIRCULAR SAW TOOTH FACE AND TOOTH TOP FOR WHEN YOU REQUIRE THAT LITTLE BIT MORE.
More informationAUTOMOTIVE TOOL SOLUTIONS FOR INDUSTRIES
AM18 AUTOMOTIVE TOOL SOLUTIONS FOR INDUSTRIES HEAD OFFICE 211, Sewolcheon-ro, Bupyeong-gu, Incheon, South Korea Phone : +82-2-526-0909 E-mail : yg1@yg1.kr www.yg1.kr Note The new address above has currently
More information1 Neuheiten_2013_V07_DE_EN.indd :26
INNOVATIONS 2014 1 2 When something exceptional develops between us: That s the MAPAL effect. Innovations and product range additions 2014 Just in time for the EMO, we are offering our customers a wide
More informationMILLING Milling cutters with replaceable inserts
_FRAESEN _DE_EN_V.indd.. : 9 FACE MILLING CUTTERS WITH PCD MILLING CARTRIDGES Introduction to the technology EcoMill and PowerMill EcoMillBlue and RapidMillBlue FlyCutter 4 Reconditioning face milling
More informationThe ultimate affordability in valve seat machining
The ultimate affordability in valve seat machining SG7 cylinder head seat & guide machine Light Weight Work Head The SG7 has a light weight work head for extremely fast and accurate centering for the ultimate
More information4 + 5!" ENGINE BLOCK CRANKSHAFT CAMSHAFT KNUCKLE CONROD BEARING CAP 16+17!
4 + 5!" 6 + 7 8 + 9 10+11 12+13 14+15 16+17! 18+19 20+21! 22+23!" 24+25! 26+27 INGERSOLL!"#$%&' 4 + 5 ENGINE BLOCK 6 + 7 CRANKSHAFT 8 + 9 CAMSHAFT 10+11 KNUCKLE 12+13 CONROD 14+15 BEARING CAP 16+17 EXHAUST
More informationTooltech Precision Reamers are designed to meet hole geometry requirements in the complex and demanding machining environment of today s manufacturing
BLADED REAMERS Tooltech Precision Reamers are designed to meet hole geometry requirements in the complex and demanding machining environment of today s manufacturing industry. The innovative design of
More informationDrilling and Tapping. A Buyers Guide.
Drilling and Tapping A Buyers Guide www.miragemachines.com About Mirage Machines Mirage portable machine tools optimise the performance of on-site assets by achieving operational excellence, maximising
More informationDeburring tools GUHRING YOUR WORLDWIDE PARTNER. EW 100 G Deburring fork EWR 500 Deburring reamer
EW 100 G Deburring fork EWR 500 Deburring reamer Chamfering milling cutter Front/back deburring mill Ball nose deburring mill EW Deburring reamer EWR 500 Deburring tools GURIG YOUR WORLDWIDE PARTER Deburring
More informationCompetence Gun Boring. KOYEMANN Floating Tools Power Reamer
Competence Gun Boring KOYEMANN Floating Tools Power Reamer R The KOYEMANN Floating Principle Reaming has been used for fine machining bores with excellent results from the very start of cutting technology.
More informationWorld leader in live tools, angle heads, and multi-spindle drill heads
World leader in live tools, angle heads, and multi-spindle drill heads heimatec GmbH headquarters-germany The Way to Success Heimatec is an international manufacturing company headquartered in Renchen,
More informationCNC machining centres. accord wd. Cnc Machining cell for doors and windows
CNC machining centres accord wd Cnc Machining cell for doors and windows accord wd Cnc Machining cell for doors and windows Flexible work cell for the production of door and window frames, fitted with
More informationSOFT-CUT High-speed milling with minimal power consumption
SPK-CUTTING PRODUCTIVITY / PRODUKTIVITÄT COSTS / KOSTEN ADDED VALUE T = / WERKZEUGE T = / TECHNOLOGIE A = / ANWENDUNG A = ADDED VALUE / MEHRWERT SOFT-CUT High-speed milling with minimal power consumption
More informationAPRIL 2009 / NEW-100 / PAGE 1 OF 13
APRIL 2009 / NEW-100 / PAGE 1 OF 13 The standard UNIDEX line covers reaming applications from 5/16 to 1 1/4 diameter. The single indexable blade and high wear resistant carbide or cermet pads provide a
More informationDeburring tools GUHRING YOUR WORLD-WIDE PARTNER. EW 100 G Deburring fork EWR 500 Deburring reamer EW 100 S Deburring spiral. Chamfering milling cutter
EW 100 G Deburring fork EWR 500 Deburring reamer EW 100 S Deburring spiral Chamfering milling cutter Front/back deburrer Ball nose deburrer EW Deburring reamer EWR 500 Deburring tools GURIG YOUR WORLD-WIDE
More informationWF 400 MA WF 600 MA Universal Milling Machine
WF 600 MA Universal Milling Machine WF 600 MA _ Easy and Manageable WF 400 MA universality The main spheres of application for the WF 400 MA and the WF 600 MA are workshops and training as well as the
More informationChapter 22 MACHINING OPERATIONS AND MACHINE TOOLS
Chapter 22 MACHINING OPERATIONS AND MACHINE TOOLS Turning and Related Operations Drilling and Related Operations Milling Machining Centers and Turning Centers Other Machining Operations High Speed Machining
More informationSPK Cutting Tool. BFL MILLING SYSTEM Plunge Milling, Helical Milling and Helical Interpolation
SPK Cutting Tool VEHICLES AEROSPACE GEAR + BEARING ENGINEERING WIND ENERGY BFL MILLING SYSTEM Plunge Milling, Helical Milling and Helical Interpolation AEROSPACE The aerospace industry places extremely
More informationWIRTSCHAFTLICHES BOHREN UND FRÄSEN VON COMPOSITE VERBUNDWERKSTOFFEN
WIRTSCHAFTLICHES BOHREN UND FRÄSEN VON COMPOSITE VERBUNDWERKSTOFFEN WIRTSCHAFTLICHES BOHREN UND FRÄSEN VON COMPOSITE VERBUNDWERKSTOFFEN You looking forward to receive a economic and safe working solution
More informationTurning and Lathe Basics
Training Objectives After watching the video and reviewing this printed material, the viewer will gain knowledge and understanding of lathe principles and be able to identify the basic tools and techniques
More informationMIKRON HPM 1150U HPM 1350U
MIKRON HPM 1150U HPM 1350U High performance milling versus high speed milling - the one cannot replace the other! While with high speed milling the objective is to create as much surface on the workpiece
More informationVSG4720. balancing. block machining. boring. cleaning. crankshaft. cylinder head machining. flywheel grinders. honing. motorcycle small engine
TM engine rebuilding equipment balancing block boring cleaning crankshaft cylinder head flywheel grinders honing motorcycle small engine surfacing center center versatility New capabilities Tooling adapters
More informationWHAT? WHERE? HOW?
JIGS WHAT? WHERE? HOW? Introduction Mass production aims at high productivities to reduce unit cost and inter-changeabilites to facilitate easy assembly. Jigs are useful in mass production. They provide
More informationCircular Saw Machines
AMADA MACHINE TOOLS EUROPE Circular Saw Machines CMB circular saw machine series for bar material CMB-75/100/150 CNC Circular saw machine series for the use of carbide tools The optimum solution for the
More informationFLOOR TYPE MILLING-BORING CENTRE
FP FLOOR TYPE MILLING-BORING CENTRE FP FLOOR TYPE MILLING-BORING CENTRE MULTI-PURPOSE MILLING AND BORING MACHINE IMPROVED FLEXIBILITY AND DYNAMICS High performance and productivity FP FLOOR TYPE MILLING-BORING
More informationDesign for machining
Multiple choice questions Design for machining 1) Which one of the following process is not a machining process? A) Planing B) Boring C) Turning D) Forging 2) The angle made between the rake face of a
More informationCircular Saw Machines
AMADA MACHINE TOOLS EUROPE Circular Saw Machines CMB Circular Saw Machine Series for Bar Material CMB 75/100/150 CNC Circular saw machines for use of carbide tools The ideal solution for sawing bar material
More informationReaming. MAPAL FixReam Solid carbide High Performance Reamers
Reaming MAPAL FixReam Solid carbide High Performance Reamers MAPAL multi-blade reamers competenc Characteristics for maximum output For more than 60 years MAPAL has been using precision tools for fine
More informationNew possibilities thanks to new solutions
Page 1 MAPAL Impulse rbeitung Lenkungs-Spurstangenanbindung, ABS Sensorbohrung und der Information, Ideas, Internals No. 45 May 2011 New possibilities thanks to new solutions Hard reaming of gear wheels
More informationSTAMPING TECHNOLOGY - CLAMPING RAW PARTS
simple. gripping. future. 5-Axis 66 Makro Grip Stamping Unit 72 Stamping Unit for the workbench 73 Stamping Unit on trolley 76 Stamping Unit Accessories 77 Stamping Jaws 78 Makro Grip 5-Axis-Vices 82 5-Axis
More informationValve body. UM DANDIA TM tooling solutions for the automotive industry
Valve body UM DANDIA TM tooling solutions for the automotive industry UM DANDIA PCD ELIMINATE FINE PCD ADJUSTMENT No more need for adjustable PCD s! With the unique UM DANDIA guide pad system, fine adjustments
More informationFeatures. Special forms are possible
Center Drill >> The is a trademark of Nine9, the developer of the first indexable center drill in the world.(patented) Offering an indexable insert system for the 1st time, Nine9 s design improves your
More informationUNIT 4: (iii) Illustrate the general kinematic system of drilling machine and explain its working principle
UNIT 4: Drilling machines: Classification, constructional features, drilling & related operations, types of drill & drill bit nomenclature, drill materials. Instructional Objectives At the end of this
More informationPRECISION IN BIG DIMENSIONS VERTICAL TURNING CENTRES VTC
PRECISION IN BIG DIMENSIONS VERTICAL TURNING CENTRES VTC 2 3 MACHINES WITH GREAT DIMENSIONS AND MACHINING CAPACITY The VTC range has been designed to create new high standards of turning and machining
More informationWF 400 MC WF 600 MC Universal Milling Machine
WF 00 MC Universal Milling Machine WF 00 MC_ Manual and CNC-operated CNC milling with contouring control Heidenhain TNC 320 Manual and CNC-operated The WF 00 MC and WF 00 MC are primarily used for training
More informationTIME-SERT THREAD REPAIR The easy, reliable solution
TIME-SERT THREAD REPAIR The easy, reliable solution THREAD REPAIR MADE EASY CONTENTS ADVANTAGES AND BENEFITS.................. 2 Design Characteristics Areas of Application Some TIME-SERT Tips Advantages
More informationThe Speed of Live and the Accuracy of Fixed
The Speed of Live and the Accuracy of Fixed SG10A CYLINDER HEAD SEAT & GUIDE MACHINE Light Weight Work Head The SG10A has a light weight work head for fast and accurate centering for the minimum concentricity.
More informationCircular Cold Saws and Systems for every application. Competence in Circular Cold Sawing Technology
Circular Cold Saws and Systems for every application Competence in Circular Cold Sawing Technology 2 VMS-Range Vertical Circular Cold Saws Manual, semi-automatic and automatic machines Robust and durable.
More informationListed below are some of our most common drill designs used in many various aerospace applications:
www.lomas.co.uk Tools can be manufactured in 3 material choices for use on composites: Solid Tungsten Carbide Tooling CVD Diamond Coated Solid Tungsten Carbide Polycrystalline Diamond (PCD) LOMAS design
More information.com More than a machine. Power your life
Heavy Duty Swivel Head Bed-Type Universal Milling Machine Ideal for Machining Large Work-pieces This kind of MM-KB2100 is the Heavy Duty Swivel Head Bed-Type Universal Milling Machine featuring large cross
More informationPowerful solutions. for your windmill production
Powerful solutions for your windmill production Do you need to boost productivity? Invite a yellow coat. Windmills are fantastic, producing energy from an endless source without waste. Their increasing
More informationDesigning for machining round holes
Designing for machining round holes Introduction There are various machining processes available for making of round holes. The common processes are: drilling, reaming and boring. Drilling is a machining
More informationMulti-axis milling/turning system IMTA 320 T2 320 T3. Interaction Milling Turning Application
Multi-axis milling/turning system IMTA 320 T2 320 T3 Interaction Milling Turning Application T e c h n i c a l D a t a s h e e t The consistent 75 step bed design allows the near rectangular arrangement
More informationCHAPTER 23 Machining Processes Used to Produce Various Shapes Kalpakjian Schmid Manufacturing Engineering and Technology 2001 Prentice-Hall Page 23-1
CHAPTER 23 Machining Processes Used to Produce Various Shapes Manufacturing Engineering and Technology 2001 Prentice-Hall Page 23-1 Examples of Parts Produced Using the Machining Processes in the Chapter
More informationWE ARE MORE THAN JUST TOOLS
Concept and Design: Wedderwille Design, Bielefeld SCHÄFFER PRÄZISIONSWERKZEUGE YOUR CONTACT PARTNERS OF THE SCHÄFFER TEAM WE ARE MORE THAN JUST TOOLS SAWING Heike Rieso Management Britta Aleth Management
More informationROOP LAL Unit-6 Lathe (Turning) Mechanical Engineering Department
Notes: Lathe (Turning) Basic Mechanical Engineering (Part B) 1 Introduction: In previous Lecture 2, we have seen that with the help of forging and casting processes, we can manufacture machine parts of
More informationReaming. Tool Systems
Milling Thread Milling Trapezoid thread ACME thread Knuckle thread TC 50 / TC 80 18-79 1 Face Finish Milling 80-85 2 Notch Impact Test 86-91 3 Gear Milling 92-95 4 Slot Milling 96-123 5 Contour and Radius
More informationMH-28V - Mill Drill - Geared & Tilting Head (X) 430mm (Y) 220mm (Z) 355mm Electronic Variable Speeds & Dovetail Column
MH-28V - Mill Drill - Geared & Tilting Head (X) 430mm (Y) 220mm (Z) 355mm Electronic Variable Speeds & Dovetail Column Ex GST Inc GST $2,290.00 $2,519.00 ORDER CODE: MODEL: Digital Readout: Type: Table
More informationSpecial reamers. Figure N 1 Reamer with descending cutting edges in carbide (Cerin)
Special reamers There is a wide category of special reamers, ie non-standard, that are suitable to address particular problems encountered in the finishing holes, both for maintenance of individual pieces
More informationFast, precise, powerful
Fast, precise, powerful CNC multi-spindle automatics of the PC series 02 Schütte PC Series Compact design: hydraulic endworking slide feed unit with linear measuring system and control valve Material removal
More informationQUALITY IN EVERY CLASS THE NEW GENERATION
QUALITY IN EVERY CLASS THE NEW GENERATION PREPARATION OF EDGE ROUNDING DEBURRING BEVELLING BEVELLING AND CHAMFERING MACHINES Edition 2017/2018 Next-generation BDS Beveling & Chamfering Machines STATE OF
More informationFLOOR TYPE MILLING-BORING CENTRE
FR FLOOR TYPE MILLING-BORING CENTRE FR FLOOR TYPE MILLING-BORING CENTRE MULTI-PURPOSE MILLING AND BORING MACHINE HIGH PERFORMANCE, ROBUST MACHINING Greater accuracy and higher efficiency FR FLOOR TYPE
More informationPilous ARG 220 DESCRIPTION
OFFER LIST Pilous Železná 9, 619 00 Brno, Czech Republic Tel.: +420 543 25 20 10 e-mail: metal@pilous.cz, www.pilous.cz ARG 220 2600 X 27 X 0,9 90 +45 +60 220 170 105 220 160 75 270 x 150 175 x 80 105
More informationReamer Basics. Fixed Reamers The reamer size is fixed and any size reduction due to wear or sharpening cannot be reclaimed
1 Reamer Basics Reamers are available in a variety of types, materials, flute styles and sizes The typical reamer is a rotary cutting tools designed to machine a previously formed hole to an exact diameter
More informationOrbital Milling. A Buyers Guide.
A Buyers Guide www.miragemachines.com About Mirage Machines Mirage portable machine tools optimise the performance of on-site assets by achieving operational excellence, maximising uptime and improving
More informationBF-20LV - Opti-Mill Drill - Geared & Tilting Head (X) 480mm (Y) 175mm (Z) 280mm Electronic Variable Speeds & Dovetail Column
BF-20LV - Opti-Mill Drill - Geared & Tilting Head (X) 480mm (Y) 175mm (Z) 280mm Electronic Variable Speeds & Dovetail Column Ex GST Inc GST $1,690.00 $1,859.00 ORDER CODE: MODEL: Digital Readout: Type:
More informationChapter 23. Machining Processes Used to Produce Round Shapes: Turning and Hole Making
Chapter 23 Machining Processes Used to Produce Round Shapes: Turning and Hole Making R. Jerz 1 2/24/2006 Processes Turning (outside surface) straight, taper, facing, contour, form, cut-off, threading,
More informationPowerful for the energy technology
Powerful for the energy technology GÜHRING - your world-wide partner powerful for the Energy technology Taps for ISO metric threads, M16 - M39 SW d2 l 1 l 2 d 1 d k Guhring no. 778 Standard DIN 2184-1
More informationPowerful for the energy technology
Powerful for the energy technology GÜHRING - your world-wide partner Industrial sectors such as transmission, turbine and energy plant manufacturers require exceptionally large threads. For exactly such
More informationLower Spindle Power Consumptionn
ower Spindle Power Consumptionn > Five cutters for drilling Ø13~Ø50 mm. > One insert for all kind of materials. > The drilling is done by helical interpolation. (circular ramping milling) Nine9 NC Helix
More informationHOLZSTAR KGZ 305 E Mitre saw with pull function for versatile and mobile use
Mitre saws with pull function HOLZSTAR KGZ 305 E Mitre saw with pull function for versatile and mobile use Features soft start Base plate and rotating platen made of die cast aluminium, compact, rugged
More informationBASIC TECHNICAL INFORMATION FOR REAMERS FLUTE STYLES
BASIC TECHNICAL INFORMATION FOR HANNIBAL CARBIDE would like to inform you of some basic technical knowledge regarding reamers. Following these guidelines will reduce overall set-up time, while increasing
More informationAutomotive Fasteners for Automotive Industry
Automotive Fasteners for Automotive Industry PEINER Umformtechnik GmbH Woltorfer Straße 20-24 D-31224 Peine Phone + 49 (0) 5171 545-0 Fax + 49 (0) 5171 545-180 e- mail sales@peiner-ut.com Internet www.peiner-ut.com
More informationMAPAL a large number of interested customers live at EMOPlus in Aalen more on pages 4 and 5
41 December 2009 INFORMATION IDEAS INTERNAL MAPAL a large number of interested customers live at EMOPlus in Aalen more on pages 4 and 5 Coupled tools with guide pads Face machining with MAPAL facing heads
More informationTHE PROBLEM OF TOOL SELECTION FOR MILLING LARGE INTERNAL THREADS
THE PROBLEM OF TOOL SELECTION FOR MILLING LARGE INTERNAL THREADS Mladen Bošnjaković Dragomir Moškun Marko Jerković M.Sc. Mladen Bošnjaković, Slavonski Brod University of Applied Science, Dr. M. Budaka
More informationAMADA MACHINE TOOLS EUROPE
AMADA MACHINE TOOLS EUROPE PRODUCT OVERVIEW MILLING TECHNOLOGY THV DUPLEX MILLING MACHINES PMH PLATE MILLING MACHINES AMADA MACHINE TOOLS Headquarters in Japan (Isehara) High-tech Development Centre near
More informationPERFORMANCE RACING AND ENGINE REBUILDING MACHINERY AND EQUIPMENT
PERFORMANCE RACING AND ENGINE REBUILDING MACHINERY AND EQUIPMENT F8A F8A with Big Block Merlin Features The F Series Boring Machines are unlike anything else available to the automotive and diesel engine
More informationARG 330 plus H.F. OFFER SHEET. Pilous. Železná 9, Brno, Czech Republic Tel.:
OFFER SHEET Pilous ARG 330 plus H.F. Železná 9, 619 00 Brno, Czech Republic Tel.: +420 543 25 20 10 e-mail: metal@pilous.cz, www.pilous.cz A completely new, revolutionary concept of the band saw arm casting
More informationKASTOssb A 2: Fully Automatic Bandsawing Machine for Mass Production Cuts.
KASTOssb A 2: Fully Automatic Bandsawing Machine for Mass Production Cuts. KASTOssb: More Economic Mass Production Cutting. Great performance, efficient footprint. The vertically running saw blade characterizes
More informationCNC TURNING CENTRES B750 B1250
CNC TURNING CENTRES B750 B1250 Cutting edge technology and unequalled productivity. B750 2-3 Machine configurations The new B750/B1250 series represents the state of the art of multifunction turning centres.
More informationLecture 15. Chapter 23 Machining Processes Used to Produce Round Shapes. Turning
Lecture 15 Chapter 23 Machining Processes Used to Produce Round Shapes Turning Turning part is rotating while it is being machined Typically performed on a lathe Turning produces straight, conical, curved,
More informationVPulse 500 ROTARY TOOLS. Highly efficient wire erosion machine for manufacturing and servicing PCD-tipped tools
VPulse 500 ROTARY TOOLS Highly efficient wire erosion machine for manufacturing and servicing PCD-tipped tools ROTARY TOOLS WIRE EROSION THE QWD-SERIES WIRE EROSION MACHINES SET THE BENCHMARK IN MANUFACTURING
More informationFERROUS AND NON-FERROUS MATERIAL
Aluminum Cutting Small Material Large Material Brush Deburring Compound Angles In and Outside Deburring FERROUS AND NON-FERROUS MATERIAL MADE IN GERMANY H350 & H450 For production cutting of mild steel
More informationK E E P I N G T H E W O R L D I N M O T I O N TM P 90 G. Grinding and Hobbing Machine
K E E P I N G T H E W O R L D I N M O T I O N TM P 90 G Grinding and Hobbing Machine machine concept P 90 G three grinding methods + hobbing combined in one machine. The P 90 G is a new development based
More informationHydroForce. HydroForce HT Hydraulic Chuck High Torque. Hydraulic Chuck (HC) Basic Working Principle
HydroForce HT ADVANCES 2015 HydroForce HT Hydraulic Chuck High Torque First choice solution for rotating applications. HydroForce HT gives you an unparalleled combination of accuracy and clamping force.
More informationFLUSH-MOUNTED CIRCULAR SAWS
NO TEARS NO EFFORT. The basic principle is pulling instead of pushing. Those who have had to cut long, unhandy or particularly hard workpieces, know that pulling is easier and cleaner than pushing. Considerably
More informationTOOLS FOR THE SPECIALIST UNDERWATER TOOLS
TOOLS FOR THE SPECIALIST UNDERWATER TOOLS PNEUMATIC TOOLS Performance data at an operating pressure of 6 bar (cont. flow). ANGLE GRINDER This handy angle grinder is particularly usable in tight spaces
More informationProduct highlights for your successful production
Page 1 MAPAL Impulse rbeitung Lenkungs-Spurstangenanbindung, ABS Sensorbohrung und der Information, Ideas, Internals No. 48 June 2012 Product highlights for your successful production Economical machining
More informationJOB QUALIFICATION STANDARD (JQS)
Occupation: Work Process: MACHINIST (CNC) CNC Setup Practical Hours: 2000 hrs. DOL Standard: CNC Setup: Apply a working knowledge in the setup of Computer Numerical Controls (CNC) machines that execute
More informationLathe is a machine, which removes the metal from a piece of work to the required shape & size HENRY MAUDSLAY
TURNING MACHINES LATHE Introduction Lathe is a machine, which removes the metal from a piece of work to the required shape & size HENRY MAUDSLAY - 1797 Types of Lathe Engine Lathe The most common form
More informationHPC FACE MILLS for rough and finish machining
HOLLFELDER CUTTING TOOLS THE ORIGINAL HPC FACE MILLS for rough and finish machining THE ULTIMATE EVOLUTION! AXIALLY CLOSED CHIP FLUTES EXTREMELY HIGH NUMBER OF CUTTING EDGE FOR FINISH MACHINING CUTTERS
More information