D u m m y Specification sheet Client Project name Order# Type Qty Front view Bottom view Photometric Summary Description Part of a family of multiple downlights, the Lumenalpha Multi 4 is a high-performance quad gimbal LED downlight. Fully adjustable with a range of outputs, the Lumenalpha Multi 4 is an optimal replacement for metal halide. The luminaire offers a choice of beam angles (including a narrow 10 beam angle for accenting, and an asymmetric distribution for wallwashing), colour rendering options, a trimless version, and accessories. Features Optics Control Output (nominal lumens) Colour and colour temperature Optics (nominal distribution) Installation type Accessories Warranty 700 lm, 1000 lm, 1300 lm, 2000 lm 2200K, 2700K, 3000K, 3500K, 4000K, Custom colour temperature combination Narrow spot 10, Narrow 20, Medium 40, Wide 60, True asymmetric wallwash, Custom optics combination Remodel non-insulated ceiling, New construction non-insulated ceiling, New construction insulated ceiling, New construction insulated ceiling - Chicago plenum rated option (airtight) Softening glass lens, Honeycomb louvre, Clear glass lens, Black snoot, White snoot, Custom accessory combination 5-year limited warranty Rating 1 / 19
Performance Maximum delivered output Maximum delivered intensity Efficacy Colour consistency Up to 1,781 lm (per fixture head) Up to 21,126 cd (per fixture head) Up to 95 lm/w (per fixture head) 2 SDCM Colour rendering CRI 80+/CRI 95+ Lumen maintenance UGR L95 55,000 hrs (Ta 40 C), L70 225,000 hrs (Ta 40 C) < 19 (not applicable to WW optic) Physical Housing material TIR optics material Reflector material Trim shape Interior finish Trim finish Adjustability Aluminium Clear polycarbonate (narrow spot and narrow optics) Aluminium (medium and wide optics) Square White, Black Black, White, Nickel satin, Trimless Up to 30 tilt (per gimbal, not available for WW optic) Electrical and control Voltage 120 volts, 277 volts Control On/off control, 0-10V (1% linear or logarithmic), Pro 0-10V (0.1% linear or logarithmic), DALI (0.1% linear or logarithmic), Lutron EcoSystem Enabled dimming, Lumentalk, Phase dimming (consult factory) Environmental Environment Damp location rating (interior applications only) Operating temperature -4 F to 104 F IP Rating IP20 2 / 19
Dimensions NS(10 ) N(20 ) M(40 ) 3 / 19
W(60 ) WW 4 / 19
Trimless version - Dimensions NS(10 ) N(20 ) M(40 ) 5 / 19
W(60 ) WW 6 / 19
Tilt limits - Typical layouts 700, 1300lm 2000lm The position of each head will vary by installation. Each head can be tilted in any direction but the heatsinks must not come in contact with one another. Photometric information Non-insulated ceiling installation types (RM and NC) Narrow Spot (nominal 10 ), one fixture head, 4000K 1, 2 Narrow (nominal 20 ), one fixture head, 4000K 7 / 19
Medium (nominal 40 ), one fixture head, 4000K Wide (nominal 60 ), 4000K, RD trim shape True asymmetric wallwash, one fixture head, 4000K 1Remove 2 watts per fixture when specifying new construction insulated ceiling installation types (IC and CP). 2Add 3 watts per fixture when specifying Lumentalk. Delivered wattage: +/- 10% tolerance. Preliminary, consult website for latest ies files. Delivered output: +/- 10% tolerance. *Photometric performance is measured in compliance with IESNA LM-79-08. 8 / 19
Photometric information Colour rendering options comparison, 3000K Control 9 / 19
Minimum ceiling height Minimum Ceiling Height A - Ceiling cutout : 9 1/4 in x 9 1/4 in B - Maximum ceiling thickness: 1 in 10 / 19
Installation type Remodel non-insulated ceiling - all control options except Lumentalk Remodel non-insulated ceiling - Lumentalk dimming -MTG-A-VOLTAGE-OUTPUT-COLOUR RENDERING-CONTROL-RM A - Available knockout holes. B - Internal wire gauge: 18 AWG -MTG-A-VOLTAGE-OUTPUT-COLOUR RENDERING-TL-RM* *Lumentalk dimming available up to 700 lumens (CR80, RCR80, CR95 or RCR95), 1000 lumens (CR80 or RCR80). A - Available knockout holes. B - Internal wire gauge: 18 AWG New construction non-insulated ceiling -MTG-A-VOLTAGE-OUTPUT-COLOUR RENDERING-CONTROL-NC A - Available knockout holes. B - Internal wire gauge: 18 AWG 11 / 19
New construction insulated ceiling New construction insulated ceiling, Chicago plenum rated option, airtight -MTG-A-VOLTAGE-OUTPUT-COLOUR RENDERING-CONTROL-IC/CP A - Available knockout holes. B - Internal wire gauge: 18 AWG C - Available for output and colour rendering combinations 12 / 19
Wiring details RM: remodel non-insulated ceiling On/off Control A - Thermal protector B - Output to luminaire C - Line (black) D - Neutral (white) E - Ground (green) F - Input (conduit, fitting & locknut by others) G - Secure data wires if not in use Control (DA1, DA2, PDA1, PDA2, DALI1, DALI2, EcoSystem )* A - Thermal protector B - Output to luminaire C - Line (black) D - Neutral (white) E - Ground (green) F - Input (conduit, fitting & locknut by others) G - Data - (grey) H - Data + (purple) Control (Daisy Chain Layout) (DA1, DA2, PDA1, PDA2, DALI1, DALI2, EcoSystem )* A - Thermal protector B - Output to luminaire C - Line (black) D - Neutral (white) E - Ground (green) F - Data + (purple) G - Data - (grey) H - Input (conduit, fitting & locknut by others) I - Output to next luminaire (conduit, fitting & locknut by others) Each Multi fixture head has its own address; a Multi 4 fixture has four EcoSystem addresses. Lutron EcoSystem Enabled dimming is not available for 700 lumens or 1000 lumens. 13 / 19
Wiring details RM: remodel non-insulated ceiling (Lumentalk dimming) Control (LT) A - Output to luminaire B - Thermal protector C - Ground (green) D - Line (black) E - Neutral (white) F - Input (conduit, fitting & locknut by others) Control (Daisy Chain Layout) (LT) A - Output to luminaire B - Thermal protector C - Ground (green) D - Line (black) E - Neutral (white) F - Input (conduit, fitting & locknut by others) G - Output to next luminaire 14 / 19
Wiring details NC: new construction non-insulated ceiling On/off Control A - Thermal protector B - Optional Output C - Power Input D - Conduit (by others) E - Conduit fitting (by others) F - Locknut (by others) G - Neutral (white) H - Line (black) I - Ground (green) J - Output to luminaire Control (DA1, DA2, PDA1, PDA2, DALI1, DALI2, EcoSystem )* A - Data - (grey) B - Thermal protector C - Data + (purple) D - Data Input from Control System E - Power Input F - Conduit (bt others) G - Conduit fitting (by others) H - Locknut (by others) I - Neutral (white) J - Line (black) K - Ground (green) L - Output to luminaire Control (Daisy Chain Layout) (DA1, DA2, PDA1, PDA2, DALI1, DALI2, EcoSystem )* A - Data - (grey) B - Thermal protector C - Data + (purple) D - Data Input from Control System E - Power Input F - Optional Output G- Conduit (bt others) H - Conduit fitting (by others) I - Locknut (by others) J - Neutral (white) K - Line (black) L - Ground (green) M - Output to luminaire Each Multi fixture head has its own address; a Multi 4 fixture has four EcoSystem addresses. Lutron EcoSystem Enabled dimming is not available for 700 lumens or 1000 lumens. 15 / 19
Wiring details IC/CP: new construction insulated ceiling On/off Control A - Conduit (by others) B - Conduit fitting (by others) C - Locknut (by others) D - Line (black) E - Neutral (white) F - Power Input G - Optional Output H - Ground (green) I - Ground (copper) Control (DA1, DA2, PDA1, PDA2, DALI1, DALI2) A - Conduit (by others) B - Conduit fitting (by others) C - Locknut (by others) D - Line (black) E - Neutral (white) F - Power Input G - Data Input from Control System H - Ground (green) I - Ground (copper) J - Data + (purple) K- Data - (grey) Control (Daisy Chain Layout) (DA1, DA2, PDA1, PDA2, DALI1, DALI2) A - Conduit (by others B - Duplex connector (by others) C - Locknut (by others) D - Line (black E - Neutral (white) F - Power Input G - Power Output to next luminaire H - Data Input from Control System I - Data Output to next luminaire J - Ground (green) K - Ground (copper) L - Data - (grey) M - Data + (purple) 16 / 19
Accessories SL-Softening glass lens HL-Honeycomb louvre CL-Clear glass lens BKSN-Black snoot WHSN-White snoot 17 / 19
How to order 1 2 3 4 5 6 7 8 9 10 11 12 13 1. Housing Lumenalpha Downlight Multi 4 2. Certification A UL/cUL 3. Voltage (1) 4. Output (nominal lumens) 120 120 volts 277 277 volts 5. Colour and colour temperature L07 L10 L13 L20 6. Colour rendering 700 lm 1000 lm 1300 lm 2000 lm 22K 2200K (2) CR80 CRI 80+ 27K 2700K CR95 CRI 95+ (4) 30K 3000K RCR80 Radiant CRI 80+ (5) 35K 3500K RCR95 Radiant CRI 95+ (4) (5) 40K CM 4000K Custom colour temperature combination (3) 7. Optics (nominal distribution) NS Narrow spot 10 N Narrow 20 M Medium 40 W Wide 60 WW CM True asymmetric wallwash Custom optics combination (6) (3) 8. Trim shape 9. Interior finish SQ Square IWH White IBK Black 10. Trim Finish 11. Control WH White NO On/off control BK Black DA1 0-10V dimming 1% linear NST Nickel satin DA2 0-10V dimming 1% logarithmic TRL Trimless PDA1 Pro 0-10V dimming 0.1% linear PDA2 Pro 0-10 V dimming 0.1% logarithmic DALI1 DALI dimming 0.1% linear DALI2 DALI dimming 0.1% logarithmic ES Lutron EcoSystem Enabled dimming (7) LT Lumentalk (8) PH Phase dimming (consult factory) 18 / 19
12. Installation type 13. Accessories (6) (10) (11) RM Remodel non-insulated ceiling NA No accessory NC New construction non-insulated ceiling SL Softening glass lens IC New construction insulated ceiling (9) HL Honeycomb louvre CP New construction insulated ceiling - Chicago CL Clear glass lens plenum rated option (airtight) (9) WHSN White snoot BKSN Black snoot CM Custom accessory combination (3) Notes: (1) (2) (3) (4) (5) (6) Consult factory for 347 volts. Available for CR80 only. Refer to the Personalised Multi Submittal Drawing download for ordering information. CR95 and RCR95 available up to 1300 lumens for NS and WW distributions. Radiant CRI options available for 3000K only. Accessories not available for WW optic. (7) One EcoSystem address per fixture. 1% minimum dimming value. Lutron EcoSystem Enabled dimming not available for TRL trimless version. Lutron EcoSystem Enabled dimming available for RM and NC installation types only. Lutron EcoSystem Enabled dimming not available for 700 lumens or 1000 lumens. (8) 1% minimum dimming value. Lumentalk dimming available for RM installation type only. Lumentalk dimming available up to 700 lumens (CR80, RCR80, CR95 or RCR95), 1000 lumens (CR80 or RCR80). (9) Insulated ceiling available up to 700 lumens (CR80, RCR80, CR95 or RCR95), 1000 lumens (CR80 or RCR80). (10) Factory installed. (11) One lens or honeycomb louvre can be installed per head. The snoot can be combined with any accessory. 19 / 19