Dual Common-Cathode Ultrafast Rectifier TO-22AB BYV32 Series PIN PIN 3 CASE 2 3 TO-263AB ITO-22AB 2 3 BYVF32 Series PIN PIN 3 2 FEATURES Power pack Glass passivated pellet chip junction Ultrafast recovery time Low switching losses, high efficiency Low forward voltage drop High forward surge capability Meets MSL level, per J-STD-2, LF maximum peak of 245 C (for TO-263AB package) Solder dip 275 C max. s, per JESD 22-B6 (for TO-22AB and ITO-22AB package) AEC-Q qualified, (for ITO-22AB and TO-263AB package) Material categorization: for definitions of compliance please see www.vishay.com/doc?9992 PRIMARY CHARACTERISTICS I F(AV) 8 A V RRM 5 V to 2 V I FSM 5 A t rr 25 ns V F.85 V T J max. 5 C Package Diode variations BYVB32 Series PIN HEATSIN TO-22AB, ITO-22AB, TO-263AB Common cathode TYPICAL APPLICATIONS For use in high frequency rectifier of switching mode power supplies, inverters, freewheeling diodes, DC/DC converters, and other power switching application. MECHANICAL DATA Case: TO-22AB, ITO-22AB, TO-263AB Molding compound meets UL 94 V- flammability rating Base P/N-E3 - RoHS-compliant, commercial grade Base P/NHE3 - RoHS-compliant, AEC-Q qualified Terminals: Matte tin plated leads, solderable per J-STD-2 and JESD 22-B2 E3 suffix meets JESD 2 class A whisker test, HE3 suffix meets JESD 2 class 2 whisker test Polarity: As marked Mounting Torque: in-lbs max. MAXIMUM RATINGS (T C = 25 C unless otherwise noted) PARAMETER SYMBOL BYV32-5 BYV32- BYV32-5 BYV32-2 UNIT Maximum repetitive peak reverse voltage V RRM 5 5 2 V Maximum RMS voltage V RMS 35 7 5 4 V Maximum DC blocking voltage V DC 5 5 2 V Maximum average forward rectified current at T C = 25 C I F(AV) 8 A Peak forward surge current 8.3 ms single half sine-wave superimposed on rated load per diode I FSM 5 A Operating storage and temperature range T J, T STG -65 to +5 C Isolation voltage (ITO-22AB only) from terminal to heatsink t = min V AC 5 V Revision: 5-Nov-7 Document Number: 88558 ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?9
ELECTRICAL CHARACTERISTICS (T C = 25 C unless otherwise noted) PARAMETER TEST CONDITIONS SYMBOL BYV32-5 BYV32- BYV32-5 BYV32-2 UNIT Maximum instantaneous forward voltage per diode Maximum DC reverse current per diode at rated DC blocking voltage Maximum reverse recovery time per diode Typical junction capacitance per diode Note () Pulse test: 3 μs pulse width, % duty cycle I F = 2 A.5 F = 5. A T J = C V () F.85 T J = C I R 6 I F = A, V R = 3 V di/dt = A/μs, I rr = % I RM t rr 25 ns 4. V, MHz C J 45 pf V μa THERMAL CHARACTERISTICS (T C = 25 C unless otherwise noted) PARAMETER SYMBOL BYV BYVF BYVB UNIT Typical thermal resistance from junction to case per diode R JC.6 5..6 C/W ORDERING INFORMATION (Example) PACAGE PREFERRED P/N UNIT WEIGHT (g) PACAGE CODE BASE QUANTITY DELIVERY MODE TO-22AB BYV32-2-E3/45.85 45 5/tube Tube ITO-22AB BYVF32-2-E3/45.97 45 5/tube Tube TO-263AB BYVB32-2-E3/45.35 45 5/tube Tube TO-263AB BYVB32-2-E3/8.35 8 8/reel Tape and reel ITO-22AB BYVF32-2HE3/45 ().97 45 5/tube Tube TO-263AB BYVB32-2HE3/45 ().35 45 5/tube Tube TO-263AB BYVB32-2HE3/8 ().35 8 8/reel Tape and reel Note () AEC-Q qualified, available in ITO-22AB and TO-263AB package Revision: 5-Nov-7 2 Document Number: 88558 ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?9
Junction Capacitance (pf) www.vishay.com RATINGS AND CHARACTERISTICS CURVES (T A = 25 C unless otherwise noted) Average Forward Rectified Current (A) 2 8 6 2 8 4 Resistive or Inductive Load 25 5 75 25 5 Case Ambient Temperature ( C) Instantaneous Reverse Leakage Current (μa) T C = C T C = 25 C. 2 4 6 8 Percent of Rated Peak Reverse Voltage (%) Fig. - Forward Current Derating Curve Fig. 4 - Typical Reverse Leakage Characteristics Per Diode Peak Forward Surge Current (A) 5 25 75 5 25 T J = 5 C ms Single Half Sine-Wave 6 5 4 3 2 f =. MHz V sig = 5 mv p-p Number of Cycles at 5 Hz Reverse Voltage (V) Fig. 2 - Maximum Non-Repetitive Peak Forward Surge Current Per Diode Fig. 5 - Typical Junction Capacitance Per Diode Instantaneous Forward Current (A). Pulse Width = 3 μs % Duty Cycle...3.5.7.9..3 Instantaneous Forward Voltage (V) Fig. 3 - Typical Instantaneous Forward Characteristics Per Diode Revision: 5-Nov-7 3 Document Number: 88558 ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?9
PACAGE OUTLINE DIMENSIONS in inches (millimeters).6 (4.6).4 (3.56).57 (.45).45 (.4).5 (2.67).95 (2.4).45 (.54) max..37 (9.4).36 (9.4) PIN 2 3.54 (3.9).48 (3.74).3 (2.87).3 (2.62).635 (6.3).625 (5.87).35 (.9).28 (.7).4 (2.65).96 (2.45).25 (5.2).95 (4.95) TO-22AB.45 (3.68).35 (3.43).35 (8.89).33 (8.38).48 (29.6).8 (28.4).56 (4.22).53 (3.46).22 (.56).4 (.36).85 (4.7).75 (4.44).55 (.39).45 (.4).63 (5.32).573 (4.55). (2.79). (2.54) 45 REF..6 (5.24).58 (4.73).56 (4.22).53 (3.46).57 (.45).45 (.4).25 (.64).5 (.38).5 (2.67).95 (2.4).44 (.26).384 (9.75) PIN 2 3.76 (.93) REF..76 (.93) REF..67 (7.4).65 (6.54).9 (4.85).7 (4.35).57 (.45).45 (.4).35 (.89).25 (.64).25 (5.2).95 (4.95) ITO-22AB.4 (3.56) DIA..25 (3.7) DIA..35 (8.89).33 (8.38).9 (4.83).7 (4.32). (2.79). (2.54). (2.79). (2.54).28 (.7).2 (.5).35 (3.43) DIA..22 (3.8) DIA..36 (9.4).32 (8.3).37 (.94).27 (.686).5 (2.67).95 (2.4).4 (.45).38 (9.65).245 (6.22) MIN. 2 D 2 PA (TO-263AB).9 (4.83).6 (4.6).624 (5.85).59 (5.).25 (5.2).95 (4.95).55 (.4).45 (.4).55 (.4).47 (.9) to. ( to.254). (2.79).9 (2.29).2 (.53).4 (.36).4 (3.56). (2.79) Mounting Pad Layout.67 (7.2).59 (5.).8 (2.32) MIN..5 (2.67).95 (2.4).42 (.66) min..33 (8.38) min..5 (3.8) min. Revision: 5-Nov-7 4 Document Number: 88558 ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?9
Legal Disclaimer Notice Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, Vishay ), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer s technical experts. Product specifications do not expand or otherwise modify Vishay s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. 27 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 8-Feb-7 Document Number: 9