VULCANUS D O O R F R A M E S - PDF Free Download

VULCANUS F I R E - R A T E D D O O R F R A M E S

2 WHERE SAFETY MEETS STYLE.

FIRE-RATED DOOR FRAMES Contact Industries offers a wide range of interior and exterior fire-rated door frames designed to fit most any door style and budget, while still adhering to even the strictest of building codes. Our frames offer trouble-free installation with features including machining for strikes and hinges, preinstalled hinges, weather strip and end-sealing to prevent moisture wicking. Reversible frames are also available. Available as 20-minute, 45-60 minute or 90-minute; Positive or neutral pressure. Available in virtually any wood veneer species. Versatile machining and finishing available to match entire millwork package. Available with factory-applied stains and topcoats, including UV-cured finishing. All frame types can be manufactured to a variety of wall thicknesses and are available in single-rabbet, double-rabbet, or Jamb & T-Stop Styles. 1

CHOOSE YOUR FRAME Fire-rated frames are an important aspect in increasing safety and minimizing property damage. Contact Industries is proud to offer fire-rated frames that have been tested and rated by a certified third-party vendor to withstand fire up to 90 minutes to best meet your needs. Plus, for projects requiring the use of metal frames, we are pleased to offer wrapped hollow metal drywall frame solutions that are fire-rated up to 90 minutes, meeting project needs while still delivering a beautiful, authentic appearance. YOUR FRAME NEEDS. OUR FIRED-RATED SOLUTIONS. Whether utilizing wood, composite or hollow metal drywall frames, we have a fire-rated productsolution for you. 20-Minute Frames - Tested and proven to withstand fire up to 20 minutes. 45-60 Minute Frames - Tested and proven to withstand fire up to 45-60 minutes. 90-Minute Frames - Tested and proven to withstand fire up to 90 minutes. Introducing: Wood-Veneered Hollow Metal Drywall Frames - Fired-rated up to 90 minutes, wood-veneer-wrapped hollow metal drywall frames adhere to the strictest of building codes without sacrificing aesthetics. ADDITIONAL OPTIONS All fire-rated frames are available in single-rabbet, double-rabbet and Jamb & T-Stop Styles for single and double openings. Factory-applied stains and topcoats, as well as UV-cured finishing available to support a consistent, flawless full millwork package. Frames offered in a variety of substrates, including finger-jointed pine, MDF and metal. 2

CHOOSE YOUR WRAP PERFORMANCE MEETS BEAUTY. Contact s innovative technologies can wrap wood, composite and metal fire-rated frames in a virtually unlimited range of attractive hardwood and softwood veneers, to match doors, casings and interior trim and deliver a seamless, beautiful appearance, all while meeting your exact specifications. WOOD VENEER Decorative hardwood is no longer bound by the limits of solid woodworking. Our ability to wrap wood, metal or composite substrates with any wood species means contractors and architects can have dimensionally stable wood elements that meet building codes, budget restrictions and style requirements. Available in over 200 species to match your project s unique design Innovative profile-wrapping process allows for specification of exact lengths, helping to minimize waste and maximize jobsite efficiency Adhere to building codes and budget restrictions, even with unique or specialty wood species Eliminate unstable sourcing concerns associated with solid wood POPULAR VENEER SPECIES CHERRY DOUGLAS FIR SAPELE WALNUT WHITE OAK ADDITIONAL OPTIONS Factory-applied stains and topcoats, as well as UV finishing also available to support a consistent, flawless full millwork package. 3

WOOD VENEER A SPECIES FOR EVERY STYLE. When it comes to style, nothing beats the authentic beauty of real wood. At Contact Industries, we re committed to offering an expansive portfolio of options to suit all tastes. For a full list of options, please speak with a representative. VENEER SPECIES OPTIONS: AFRORMOSIA ANIGRE ASH ASH QUARTERED BUBINGA CHERRY Moderately fine texture Grain ranges from straight to interlocked Often specified for its uniform color Heartwood is a light, yellowish brown, turns more golden brown with age Growth rings are not well-defined Heartwood is a light, brown color, though darker shades can be present Has medium to coarse texture Heartwood is a light, brown color, though darker shades can be present Has medium to coarse texture Color ranges from pinkish red to a darker reddish brown with dark purple or black streaks Has a very fine texture and small pores Grain is often interlocked Heartwood is a light pinkish brown when freshly cut; darkens over time to a deep golden brown when exposed to sunlight Fine texture and closed grain which usually runs straight DOUGLAS FIR ETIMOE EUROPEAN BEECH EUROPEAN BEECH QUARTERED GENUINE MAHOGANY HARD MAPLE Characterized by the strong contrast in color between the yellow/orange early wood and the red/ brown late wood contained in the growth rings Straight parallel vertical grain pattern Sometimes referred to as Tigerwood Heartwood can vary from a reddishbrown to a greybrown, with reddish veining or striping Interlocked grain Highly sought-after for its naturalfigured appearance Typically a pale cream color with pinkish hue Veneer tends to be slightly darker due to the steaming process (necessary in order to slice) Typically a pale cream color with pinkish hue Veneer tends to be slightly darker due to the steaming process (necessary in order to slice) Heartwood can vary widely in color, from a pale pinkish brown to a darker, reddish brown Medium to large pores and coarse texture Grain can be straight, interlocked or wavy Color ranges from nearly white to an off-white, cream color Sometimes exhibits a reddish or golden hue Has a fine, uniform texture with a small pore structure HARD MAPLE QUARTERED HICKORY JATOBA KOA LIMBA MACASSAR EBONY Color ranges from nearly white to an off- white, cream color Sometimes exhibits a reddish or golden hue Has a fine, uniform texture with a small pore structure 4 Heartwood tends to be a light to medium brown with a reddish hue Grain is normally straight, but sometimes can be wavy or interlocked Has open pores with a medium texture Can vary in color from a light orangebrown to a darker, reddish brown Usually grows darker with age Grain pattern is typically wavy and interlocked Coarse texture and large pores Can be highly variable in color but tends to be a medium golden to dark reddish brown Usually contrasting bands of color in the growth rings Has small open pores and a medium to coarse texture Grain is slightly interlocked and wavy Wood has a pale, yellow-brown color Grain is straight and closed, with moderately coarse texture Sometimes can have a wavy appearance, giving interesting figure Prized for its luxuriant, multicolored grain Has a dramatic striped appearance, with light to reddish brown body and darker brown to black stripes Fine texture and small pores

MAKORE MOZAMBIQUE OLIVEWOOD PONDOROSA PINE POPLAR RADIATA PINE Color is pink to reddish brown with a natural luster due to high silica content Grain can be straight, interlocked or wavy Has a fine, closed pore structure Reddish brown heartwood that tends to darken to a deep mahogany color when exposed to air Grain is irregular and interlocked brown to black stripes Has a cream or yellowish brown body with darker brown or black contrasting grain lines Color tends to deepen with age Curly or wavy grain Has a whitish to pale yellow color Sometimes exhibits a reddish hue with darker, more pronounced hard grain Has a fine pore structure and smooth texture Has a light cream to yellowish brown color, with occasional streaks of grey or green Can exhibit mineral stain colors ranging from dark purple to red, green or yellow Straight, uniform grain Pale yellow-brown and generally straight grained with prominent growth rings Has a fine pore structure and smooth texture RADIATA PINE VERTICAL GRAIN RED ALDER RED OAK RED OAK RIFT ROSEWOOD SANTOS SAPELE Pale yellow-brown and generally straight grained with prominent growth rings Has a fine pore structure and smooth texture Heartwood is reddish brown Straight grained and uniformly textured Contains many small character marks Has a light to medium reddish color Medium to large pores and fairly coarse grain Has a light to medium reddish color Medium to large pores and fairly coarse grain Most common commerical substitute for the endangered and no longer available Brazilian Rosewood Color can be varied, ranging from reddish-orange to a dark, violet-brown Medium-to-dark reddish brown or purplish brown color that tends to darken with age Has a fine texture with small pores SAPELE QUARTERED SPANISH CEDAR TEAK FLAT CUT TEAK QUARTERED WALNUT WALNUT RIFT Medium-to-dark reddish brown or purplish brown color that tends to darken with age Has a fine texture with small pores Light red to pinkish orange in color Can be straightgrained, wavy, curly or burled Though classified as a hardwood, the wood is soft, with a moderately coarse texture Has a golden or medium brown color that tends to darken with age Has coarse texture with medium-sized pores Has a slightly oily feel due to its natural oils Has a golden or medium brown color that tends to darken with age Has coarse texture with medium-sized pores Has a slightly oily feel due to its natural oils Heartwood ranges from lighter pale brown to a dark chocolate brown, with darker brown streaks Sometimes exhibits a grey, purple or reddish cast Medium, straight grain with occasional sweep Heartwood ranges from lighter pale brown to a dark chocolate brown, with darker brown streaks Sometimes exhibits a grey, purple or reddish cast Medium, straight grain with occasional sweep WENGE WESTERN RED CEDAR WHITE OAK WHITE OAK RIFT ZEBRANO Heartwood is very dark brown with black streaks Unlike most woods, becomes lighter in color when exposed to direct sunlight Has a coarse grain and rough texture Typically reddish to pinkish brown, often with random streaks and bands of darker red/brown areas Has straight grain with medium to coarse texture Color is light to medium brown Medium to large pore structure Fairly coarse grain Color is light to medium brown Medium to large pore structure Fairly coarse grain Heartwood is light brown or cream colored with dark, blackish streaks vaguely resembling a zebra s stripes When flat-sawn, stripes appear wavy, while in quartersawn they are more uniform Medium to large pore structure 5

TESTING & OFFERING DETAILS CONTACT INDUSTRIES Based in Portland, Oregon, Contact Industries has been providing exceptional products and customer service since the company was founded in 1946. Over the years, Contact Industries has evolved into a valueadded producer of engineered veneered mouldings and millwork serving a variety of industries including Window and Door, Institutional and Residential Furniture, Cabinet and Architectural Projects. By utilizing state-of-the-art manufacturing practices and adhering to the highest quality standards in the industry, Contact Industries has earned recognition as an innovative leader in developing new products to meet the demands of the marketplace. Contact Industries prides itself on manufacturing products that are good for the environment there is no formaldehyde added and the company s use of veneers and finger jointing leverages and conserves valuable renewable resources. SYSTEM SPECIFICATIONS 20-, 45- and 60- Minute Postive or Neutral Pressure 90- Minute Positive or Neutral Pressure VARIABLE MIN MAX MIN MAX Wall thickness 4 3/4" None 5" None Opening Width, Single Swing None Up to 48" None Up to 48" Opening Width, Pairs None Up to 84" None Up to 84" Opening Height None Up to 108" None Up to 96" Jamb Thickness 7/8" None 7/8" None 6 Contact Industries 9200 SE Sunnybrook Blvd., Suite 200 Clackamas, OR 97015 800.547.1038 www.contactind.com Endura Products, Inc. 8817 W. Market St. Colfax, NC 27235 800.334.2006 www.enduraproducts.com

CERTIFICATES 7

VULCANUS FIRE-RATED FRAMES This is to certify that the Quality Management System of: Contact Industries 1155 N. Main Street Prineville OR 97754 applicable to: Engages in the manufacturing of engineered components for the door / window industry and architectural millwork utilizing veneer technology over a variety of substrate materials (wood / vinyl / aluminum / steel / fiberglass/ MDF / fire rated particleboard) has been assessed and approved by National Quality Assurance, U.S.A., against the provisions of: ISO 9001: 2008 KFor and on behalf of NQA, USA February Certificate Number: EAC Code: Certified Since: Valid Until: Reissued: Cycle Issued: 12708 06 April 8, 2008 September 14, 2018 17, 2017 February 17, 2017 Page 1 of 1 8 This approval is subject to the company maintaining its system to the required standard, which will be monitored by NQA, USA, 289 Great Road, Suite 105, Acton, MA 01720, an accredited organization under the ANSI-ASQ National Accreditation Board.

SCS Global Services does hereby certify that an independent assessment has been conducted on behalf of: Contact Industries 9200 SE Sunnybrook Blvd. Suite 200, Clackamas, OR 97015, USA 1155 N. Main Street, Prineville, Oregon 97754, USA This certificate covers the production of mouldings, veneer products, and wall panels using the transfer and percentage systems. The certificate also covers the purchase and sale of FSC Controlled Wood. The facility(s) are hereby Chain of Custody certified to sell products as: FSC 100%, FSC Mix, FSC Controlled Wood The assessment has been conducted by Scientific Certification Systems (SCS) in accordance with the rules of the Forest Stewardship Council A.C. (FSC). FSC Standard: FSC-STD-40-004 V2-1, FSC-STD-40-005 V2-1 Certificate Code: SCS-COC-001260 Trademark License Code: FSC-C022452 CW Code: SCS-CW-001260 Valid from 5 November, 2012 to 4 November, 2017 This certificate itself does not constitute evidence that a particular product supplied by the certificate holder is FSC-certified [or FSC Controlled Wood]. Products offered, shipped or sold by the certificate holder can only be considered covered by the scope of this certificate when the required FSC claim is clearly stated on invoices and shipping documents. A list of products that are included in the scope of this certificate may be found at http://info. fsc.org or will be provided by SCS on request. The certificate shall remain the property of SCS, and this certificate and all copies or reproductions of this certificate shall be returned to SCS immediately upon request. Robert J. Hrubes, Ph.D., Executive Vice President SCS Global Services 2000 Powell Street, Ste. 600, Emeryville, CA 94608 USA Printed: 8 Nov, 2012 9

VULCANUS FIRE-RATED FRAMES 10

MANUFACTURING 11

VULCANUS FIRE-RATED FRAMES 12

MANUFACTURING TABLE OF CONTENTS 8 9 10-11 11 12-13 14 Application & Installation Hardware Requirements 20-90-Minute Neutral Pressure and Positive Pressure Anti-Fire Composite Frame Construction Concealed Closer (20 Minute Only) 20-Minute Neutral Pressure and Positive Pressure, Solid Wood Finger Joint Frame Construction 20-90-Minute Neutral Pressure and Positive Pressure Wood Veneered Hollow Metal Drywall Steel Frames The fire rating labels are good for North America. However, Mexico does not necessarily recognize UL10c and it is ultimately up to the authority having jurisdiction where the project is located. 13

VULCANUS FIRE-RATED FRAMES APPLICATION The door frames described in this specification and for 20-45-60 and 90 minute ratings are per UBC 7-2 (1997), for Single Swing and Pair Openings. All Frames are designed to use neutral pressure doors of equal or greater fire-ratings within the openings. Certified intumescents are required on the meeting edge of pairs. All door frames are to be installed in wall systems of equal or greater fire ratings (of the door) per UBC 7-2 (1997) and UL 10C. All rough openings for a 7/8" thick jamb installation should be a minimum 2-1/4" to 3" maximum over nominal width of the door and 1-1/4" minimum to 1-3/4" maximum over nominal height of the door. All rough openings for custom jamb thickness should be a minimum ½" plus twice the jamb thickness plus the width of the door. Door frames constructed as illustrated in these procedures meet the requirements for either neutral (UBC 7-2, 1994 and UL 10B) or positive pressure fire tests, UBC 7-2 (1997) and UL 10C (1998). Door frames labeled for positive pressure applications do not need any additional intumescents between the door and the frame. All that is required is the concealed and (or) recessed intumescent within the existing system. Note: No additional smoke and draft control gasketing or intumescent is required. This is an all-inclusive, self-contained system. INSTALLATION The installation of the frame in the opening is critical to the performance of the product in the test, but simple or minimal variations are acceptable. One of these is the attachment of the frame header to the frame legs. Although our specification and installation instructions indicate a flush joint with the header adjacent (flush) to the top outside edge of the frame leg, other connecting joints have proven not to deter from the performance of the product. Other suitable corner attachments would be where the header is placed inside the frame legs and flush to the top of the frame leg, or where the ends of the header and top of the frame leg are machined for miter or dado joints. The imperative factor is that the header must be secured to the frame leg with screws, either through the header and into the leg, or through the leg and into the header, and there must be a continuous line of intumescent material around the back side of the fame leg and header. 14

HARDWARE While Contact cannot control what hardware the end customer actually installs in the unit, the end user is responsible for verifying that the hardware installed meets or exceeds the fire rating of the opening. All hinge and applicable hardware must be fire rated for use in openings at or above the fire rating of the Frame System being installed in accordance with NFPA 80, Table 2-8.1.1, or have passed testing at or above the fire rating by Intertek Testing Services. Gasketing required for all labeled frames will be supplied by Contact Industries unless specified by the customer. Listed and labeled, Schlegel Thermolin & Sperry Rubber type gasketing is acceptable. Any other listed and labeled compression type, kerf-attached gasketing may also be used. The use of Pemko S88 in place of the kerf applied weather-strip listed above is acceptable on Neutral Pressure only. Substitutes are not allowed. Tectus hinges have not been tested and are not approved in Contact frames. SOSS hinges are approved with limitations listed below: Model 218 and Model 418 SOSS hinges only. 20-minute neutral pressure only. Jamb thickness must be increased by at least ½". Depth of cutouts must not go through jamb entirely. SOSS hinge frames must be 2-5/32" thick not including stop in order to be labeled / rated. 4-0 x 8-0 single maximum. 8-0 x 8-0 pair maximum. Closers of any type that require more than mounting screws to the surface are not approved in Contact frames. Labels can only be applied to machined frame sets. Non Machined FR Frames can only be sold to customers approved with Authorization to Mark through ITS. 15

VULCANUS FIRE-RATED FRAMES CONTACT INDUSTRIES THROUGH ITS - INTERTEK TESTING SERVICES SECTION 1 20 90 MINUTE FIRE RATED NEUTRAL (NP) or POSITIVE PRESSURE (PP) FRAMES Single Rabbet Jamb or Flat Jamb & T-Stop Paint Grade, High Pressure Laminate, or Wood Veneer Application The door frames described in this specification are for 20, 45, 60, & 90 minutes ratings per UBC 7-2 (1997), for Single Swings and Pairs Openings. All frames are designed to use neutral pressure doors of equal or greater fireratings within the openings. All door frames are to be installed in wall systems of equal or greater fire ratings (of the door) per UBC 7-2 (1997) and UL 10C. Door frames constructed as illustrated in these procedures meet the requirements for both neutral and positive pressure fire tests, UBC 7-2 (1997) and UL 10C (1998). Door frames labeled for positive pressure applications require the use of intumescent materials to seal the areas between the frame and the door, and the frame and the wall. Installation instructions will be furnished and shall describe (if any) intumescent materials that are to be field applied at time of installation. Note: No additional smoke and draft control gasketing is required. This is an all-inclusive, self- contained system. Size Limitations Single 20 60 Minute Rating (Anti-Fire Composite Frame Leg Construction) Maximum Opening Width 4'-0" Maximum Opening Height 8'-0" Minimum Frame Leg Thickness 3/4" Minimum Stop Thickness 5/8" Minimum Frame Leg Width 4-3/4" Maximum Frame Leg Width Equivalent to Wall Thickness 16

Single 90 Minute Rating (Anti-Fire Composite Frame Leg Construction) Maximum Opening Width 4'-0" Maximum Opening Height 8'-0" Minimum Frame Leg Thickness 3/4" Minimum Stop Thickness 5/8" Minimum Frame Leg Width 5" Maximum Frame Leg Width Equivalent to Wall Thickness Pairs 45-60-90 Minute Rating (Anti-Fire Composite Frame Leg Construction) Maximum Opening Width 7'-0" Maximum Opening Height 8'-0" Minimum Frame Leg Thickness 3/4" Minimum Stop Thickness 5/8" Minimum Frame Leg Width 4-3/4" (5" on 90 minute) Maximum Frame Leg Width Equivalent to Wall Thickness Single 20 Minute Frame with LCN2030 Concealed Closer (MDF or Anti-Fire Composite Frame Leg Construction) Maximum Opening Width 4'-0" Maximum Opening Height 8'-0" Minimum Frame Leg Thickness 3/4" Minimum Stop Thickness 5/8" Minimum Frame Leg Width 4-3/4" Maximum Frame Leg Width Equivalent to Wall Thickness Pairs 20 Minute Frame with LCN2030 Concealed Closer (MDF or Anti-Fire Composite Frame Leg Construction) Maximum Opening Width 7'-0" Maximum Opening Height 8'-0" Minimum Frame Leg Thickness 3/4" Minimum Stop Thickness 5/8" Minimum Frame Leg Width 4-3/4" Maximum Frame Leg Width Equivalent to Wall Thickness 17

VULCANUS FIRE-RATED FRAMES CONTACT INDUSTRIES THROUGH ITS - INTERTEK TESTING SERVICES SECTION 2 - CONTACT 20 MINUTE FIRE RATED POSITVE PRESSURE (PP) and NEUTRAL PRESSURE (NP) FRAMES Solid wood finger joint construction Single Rabbet & Double Rabbet (see minimum stop width below) Wood Veneer, DNP (vinyl film), RENOLIT FILM, or Finger Joint. Application Wood Door Frame (Knock Down) for installation in 20 minute locations in Steel/Wood Stud Drywall or Masonry openings. No gasket required Single 20 Minute Frame Neutral Pressure (NP) Maximum Opening Width 4'-0" Maximum Opening Height 9'-0" Minimum Stop Depth 1/2" Minimum Stop Width 1-3/8" Minimum Rabbet 1-13/16" (non kerf) 1-15/16" (kerf) Minimum Leg Thickness 11/16" (door side) 1-3/16" (soffit side) Maximum Kerf 1/8" x 1/2" Minimum Frame Leg Width 3-1/2" Maximum Frame Leg Width Equivalent to Wall Thickness Application Wood Door Frame (Knock Down) for installation in 20 minute locations in Steel/Wood Stud Drywall or Masonry openings. The end user must install Pemko HSS2000 Edge Sealing System. Single 20 Minute Frame Positive Pressure (PP) Maximum Opening Width 4'-0" Maximum Opening Height 9'-0" Minimum Stop Thickness 1/2" Minimum Stop Width 1-3/8" Minimum Rabbet 1-13/16" (non kerf) 1-15/16" (kerf) Minimum Leg Thickness 11/16" (door side) 1-3/16" (soffit side) 18

Maximum Kerf 1/8" x 1/2" Minimum Frame Leg Width 3-1/2" Maximum Frame Leg Width Equivalent to Wall Thickness Pairs 20 Minute Frame Positive Pressure (PP) Wood Maximum Opening Width 8'-0" Maximum Opening Height 9'-0" Minimum Stop Thickness 1/2" Minimum Rabbet 1-13/16" (non kerf) 1-15/16" (kerf) Minimum Leg Thickness 11/16" (door side) 1-3/16" (soffit side) Maximum Kerf 1/8" x 1/2" Minimum Frame Leg Width 3-1/2" Maximum Frame Leg Width Equivalent to Wall Thickness 19

VULCANUS FIRE-RATED FRAMES CONTACT INDUSTRIES THROUGH ITS - INTERTEK TESTING SERVICES SECTION 3 - CONTACT 20-90 MINUTE FIRE RATED POSITVE PRESSURE (PP) OR NEUTRAL PRESSURE (NP) HOLLOW METAL DRYWALL STEEL FRAMES 90 Minute Steel Door Frame Category C (UL Subject 63 Compliant) 16 gage steel frames in steel/wood stud drywall or masonry openings. Wood Veneer cladding is surface mounted on steel frames. Limitations: Single Swing: Maximum Single Swing Frame Size (Opening): 48" wide x 108" high Minimum Frame Throat Opening: 4" Minimum Drywall Penetration Into Frame Jamb (For Drywall Wall Applications): 1/2" Standard Pairs: Maximum Standard Pair Frame Size (Opening): 96" wide x 108" high Minimum Frame Throat Opening: 4" Minimum Drywall Penetration Into Frame Jamb (For Drywall Wall Applications) : 1/2" Up to 90 minute positive or neutral pressure listed Category C. Standard steel frame installation instructions must be followed. 20

DIAGRAMS 21

VULCANUS FIRE-RATED FRAMES DOOR FRAME CLIP INSTALLATION INSTRUCTIONS Materials: Frame legs Frame header Intumescent material 5-inch angle clips 3-inch angle clips 4-1/2-inch receiver brackets #6 3/4-inch wood screws #12 1-1/4-ich screws #8 2-inch screws STEP 1 Measure the rough opening size and cut the frame pieces to length. STEP 2 Using predrilled holes and #6 3/4-inch flat head wood screws, attach 5-inch angle clips to the hinge-side frame leg. Clips should be attached directly behind each hinge point, parallel to the intumescent strip, with the right angle of the clip flush with the edge of the frame leg. STEP 3 Once the clips are attached, the hinges can be attached. Predrill screw holes, with the predrilled holes penetrating the metal clip on the opposite side of the frame leg. Attach hinges using #12 1-1/4- inch screws. 22

STEP 4 Repeat Steps 2 and 3, on the latch side frame leg, making sure to avoid attaching a clip behind the where the latch strike will be attached. STEP 5 Attach clips to the header in a similar manner NOTE: If header is 36" or shorter, only one set of clips is required. For headers that are longer than 36", use two sets of clips, installed so that the distance between clips is equal to the distance between clips and the ends of the header piece. STEP 6 Using #8 2-inch wood screws, secure the header to the frame legs so that the ends of the header are flush with the outside edges of the frame legs. Predrill holes and use two screws on each end. STEP 7 Slide the loose 3-inch angle clips into the receiver clips on both frame legs and the frame header. 23

VULCANUS FIRE-RATED FRAMES STEP 8 Once the frame is entirely assembled, remove the 3-inch angle clips from the slip brackets. Lift the frame and slide it into the rough opening so that the 5-inch angle clips are flush with the wall. Once the frame is in the opening, level the hinge leg so that it is plumb. Always start with the hinge leg. Check for plumb at each bracket, insert a single 2-inch flat head wood screw to hold the leg in place and move on to the next bracket. STEP 9 Secure the header in the same manner and then move on to the latch-side leg. STEP 10 Plumb the hinge leg using a spacer bar that has been cut to the exact length of the header. Use the spacer bar before securing each angle clip on the latch side. STEP 11 Once the frame is in place and squared in the opening, insert screws in all remaining screw holes of the door-side angle clips. 24

STEP 12 Once the frame is secured to the wall on the door side, insert the 3-inch angle clips into the receiver brackets on the non-door side of the frame. When the clips are flush to the wall, secure them using two-inch flat head wood screws. Now you are ready to hang the door and install perimeter casing. With the door and casing installed, you will have a finished opening with no exposed fasteners. 25

VULCANUS FIRE-RATED FRAMES 26

VULCANUS FIRE-RATED FRAMES 28

VULCANUS FIRE-RATED FRAMES 30

FORMS 31

VULCANUS FIRE-RATED FRAMES REQUEST FOR QUOTE Phone: 503-228-7361 Email: sales@contactind.com 9200 SE Sunnybrook Blvd # 200, Clackamas, OR 97015 Fax: 503-221-1340 Web: www.contactind.com v10.7 Company Name: Project Name: Start Date: Requested by: Project Location: Ship Date: Phone #: Fax #: Today's Date: # of Phases/Deliveries: CR Quote Required Date: Handling: Bundling Bulk Specification Available for our review: Yes No NAUF FSC Comments: Veneer and Jamb Types Substrate Rating Class Veneer Species: N/A Prefinish info. Color Match FJ Pine Neutral Finish Jamb Type Veneer Cut End Work Clear Poplar Pos Pressure Stain Flat Jamb Plain Sliced Head Dado Paint MDF Paint T-Stop Rift Sill Dado Prime Other Single Rabbet Quartered 4 side 3 side Double Rabbet Other None Opening Qty Opening Type* Width X Height Door Thickness Jamb Width Jamb Thickness Lock Strike Plate Fire Rating Hinge Jamb drawing detail number Type Flush Bolt Strike (FB) OR Roller Latch Strike (RC) Notes 0 Total Frames this page Please attach all drawings and comments *Opening Types Poc = Pocket Door BP = Bi-pass Door CO = Cased Opening SNGL = Single Door DBL = Double Door Continued on page -

FRAME ORDER Phone: 503-228-7361 Fax: 503-221-1340 Email: sales@contactind.com 9200 SE Sunnybrook Blvd # 200, Clackamas, OR 97015 Web: www.contactind.com Customer: Via: Required: Date: Page #: Ship to: Same Job Site: Your Order # Our Quote#: Please provide template with every hardware part Fill out one sheet for each frame set that has the same unique details. Such as - jamb style, jamb depth, hing & strike locations, width & height. Different door handlings may be listed on this sheet but must be combined by each handling with door numbers listed for each handling group Quantity: Species: Part # Top inside jamb to top of hinge Top inside jamb to strike centerline Door Thickness Flat Jamb T-Stop Jamb Left hand LH Roller latch strike 1/8" Single Rabbet Right hand reverse RHR Inside frame opening width Door Stop Wall Thickness Double Rabbet Left hand reverse LHR Inside frame opening height Hinge Square Corner 1/4" Radius Notes/Jamb Type Other 5/8" Radius Right hand RH Strike Lock Dead Lock Qty Door Mark # Swing Thickness Manufacturer Template # ASA 1 ¼ x 4 7/8 Hardware Model Template# Roller Catch Strike Flush Bolt Strike Please provide template with every hardware part Pivot Intermediate Pivot Height Hinges Concealed Overhead Door Closer Type Electric Strike Template # Other Backset Notes Signature:

VULCANUS FIRE-RATED FRAMES Qty Door Mark # Swing