D3G146-HQ13-4 ebm-papst Mulfingen GmbH & Co. KG Bachmühle D-74673 Mulfingen Phone +49 7938 81- Fax +49 7938 81-11 info1@de.ebmpapst.com www.ebmpapst.com Limited partnership Headquarters Mulfingen County court Stuttgart HRA 59344 General partner: Elektrobau Mulfingen GmbH Headquarters Mulfingen County court Stuttgart HRB 5914 Nominal data Type Motor D3G146-HQ13-4 M3G55-DF Phase 1~ Nominal voltage VAC Nominal voltage range VAC.. 4 Frequency Hz /6 Type of data definition ml Speed min -1 4 Power input W Current draw A 1.8 Min. back pressure Pa Min. ambient temperature C -5 Max. ambient temperature C + ml = max. load me = max. efficiency fa = running at free air cs = customer specs cu = customer unit Subject to alterations Data according to ErP directive Installation category A Efficiency category Static Closed-loop speed control Integrated Specific ratio * 1, * Specific ratio = 1 + p sf / 1 Actual Request 13 Request 15 Overall efficiency η e 47,9 5,5 3,5 Efficiency grade N 59,4 37 44 Power input P e kw,15 Air flow q v m³/h 5 Pressure increase Total p sf Pa 453 Speed n min -1 715 Data established at point of optimum efficiency Item no.: 5176-5-998 Revision: 7587 Print-out: 1--8 Y. Uhlmann (VM-TDO) Page 1 / 5 ebm-papst Mulfingen GmbH & Co. KG Bachmühle D-74673 Mulfingen Phone +49 7938 81- Fax +49 7938 81-11 info1@de.ebmpapst.com www.ebmpapst.com
D3G146-HQ13-4 Technical features Mass Size Surface of rotor Material of electronics housing Material of impeller Housing material Motor suspension Direction of rotation Type of protection Insulation class Max. permissible ambient motor temp. (transp./ storage) Min. permissible ambient motor temp. (transp./storage) Mounting position Condensate discharge holes Operation mode Motor bearing Technical features Leakage current Electrical leads Motor protection Cable exit Protection class Product conforming to standard.4 kg 146 mm Galvanised PP plastic, black PP plastic, white PP plastic, black Motor anti-vibration mounted on both sides Counter-clockwise, seen on rotor Motor IP54 "F" + 8 C - 4 C Any None, open rotor S1 Ball bearing - Output 1 VDC, max. 1.1 ma - Tach output - Motor current limit - Soft start - Control input -1 VDC / PWM - Over-temperature protected motor <= 3.5 ma With plug; Via terminal box Thermal overload protector (TOP) wired internally Variable I (if protective earth is connected by customer) EN 6335-1; CE Item no.: 5176-5-998 Revision: 7587 Print-out: 1--8 Y. Uhlmann (VM-TDO) Page / 5 ebm-papst Mulfingen GmbH & Co. KG Bachmühle D-74673 Mulfingen Phone +49 7938 81- Fax +49 7938 81-11 info1@de.ebmpapst.com www.ebmpapst.com
D3G146-HQ13-4 Product drawing 1 Strip Molex Mini-Fit 39-3-355, pluggable with connector housing Molex 39-1-4 1.1 1V 1. Tach 1.3-1V lin. / PWM 1.4 Not assigned 1.5 GND Pin socket AMP Mate-N-Lok 1-3943-, pluggable with connector housing AMP 3766-4.1 PE. N.3 L 3 4 x sheet metal nut for thread EN ISO 1478-ST4.8 (min. screw length 14.5 mm plus thickness of mounting material) 4 EMC earth, 1 x brass lead tip crimped Item no.: 5176-5-998 Revision: 7587 Print-out: 1--8 Y. Uhlmann (VM-TDO) Page 3 / 5 ebm-papst Mulfingen GmbH & Co. KG Bachmühle D-74673 Mulfingen Phone +49 7938 81- Fax +49 7938 81-11 info1@de.ebmpapst.com www.ebmpapst.com
D3G146-HQ13-4 Connection screen No. Pin Signal Function / assignment CON1 1.1 1 V/max. 1.1 ma Voltage output 1 V/ 1.1 ma, electrically isolated CON1 1. Tacho Tach output: open collector, 1 pulse per revolution, electrically isolated CON1 1.3-1 V PWM Control input - 1 V or PWM, electrically isolated CON1 1.4 NB Not assigned CON1 1.5 GND GND - Connection for control interface CON.1 PE Protective earth CON. N Neutral conductor CON.3 L Power supply VAC, -6 Hz, for voltage range refer to rating plate Item no.: 5176-5-998 Revision: 7587 Print-out: 1--8 Y. Uhlmann (VM-TDO) Page 4 / 5 ebm-papst Mulfingen GmbH & Co. KG Bachmühle D-74673 Mulfingen Phone +49 7938 81- Fax +49 7938 81-11 info1@de.ebmpapst.com www.ebmpapst.com
D3G146-HQ13-4 Charts: Air flow Hz Druck p sf[pa]für Rho=1,kg/m^3 5 1 3 qv[cfm] 4 6 7 8 48 46 44 4 4 38 36 34 3 3 8 6 4 18 16 14 1 16 15 1 4 8 11 1 7 3 6 1,9 1,8 1,7 1,6 1,5 1,4 1,3 1, 1,1 1,9,8,7,6,5 psf_e[in HO] Measurement: LU-13488 Measurement: LU-134 Measurement: LU-134 Measurement: LU-1344 Air performance measured as per ISO 581 Installation category A. For detailed information on the measuring set-up, please contact ebm-papst. Suction-side noise levels: LwA measured as per ISO 13347 / LpA measured with 1m distance to fan axis. The values given are valid under the measuring conditions mentioned above and may vary according to the actual installation situation. With any deviation from the standard set-up, the specific values have to be checked and reviewed with the unit installed. 1,4 8 6 4 1 3 4 14 13 6 9 7 8 qv[m^3/h] 5 1 9 1. 1.1 1. 1.3,3,,1 1.4 Measured values U f n P e I qv p sf V Hz min -1 W A m 3 /h Pa 1 179 189 1.47 18 4 1.8 9 3 535 6 1.61 755 38 4 75 164 1.3 5 46 5 1535 118.97 9 6 4 154 1.1 8 191 7 395 175 1.38 75 333 8 695 169 1.33 545 454 9 165 66.57 7 1 1675 85.71 655 18 11 1975 98.8 585 5 1 38 118.96 485 354 13 97 9.7 57 14 175 38.34 49 7 15 149 43.37 43 1 16 18 5.44 36 199 Item no.: 5176-5-998 Revision: 7587 Print-out: 1--8 Y. Uhlmann (VM-TDO) Page 5 / 5 ebm-papst Mulfingen GmbH & Co. KG Bachmühle D-74673 Mulfingen Phone +49 7938 81- Fax +49 7938 81-11 info1@de.ebmpapst.com www.ebmpapst.com