Fiber The of intensity modulators is a family of high performance modulators exhibiting superior Extinction Ratio. Their specific design relies on ixblue Magic Junction (patent n US2819377). intensity modulators are key devices in all applications where a combination of high extinction and high bandwidth is required: laser pulse picking prior optical amplification, pulse generation or lidar based sensing systems are a few examples, as well as fiber optics sensors. MXER-LN Performance Highlights Parameter Min Typ Max Unit FEATURES Superior extinction ratio: 4 db High bandwidth X-cut for high stability Low drive voltage Low insertion loss APPLICATIONS Pulse generation / picking Carrier suppression Fiber optics sensors Pulse applications OPTIONS 2 GHz version 16 nm, 13 nm band versions Operating wavelength 13-162 nm Insertion loss - 4 - db Extinction ratio - 3, 3, 4 - db Electro-optical bandwidth 1 - - GHz Specifications given at 2 C, 1 nm MXER-LN Performance Highlights Parameter Min Typ Max Unit Operating wavelength 13-162 nm Insertion loss - 4 - db Extinction ratio - 3, 3, 4 - db Electro-optical bandwidth 18 - - GHz Specifications given at 2 C, 1 nm Extinction Ratio Response 111/17 / V6 / IF / ixblue/mxer-ln-series RELATED EQUIPMENTS Pulsed driver DR-PL MBC Automatic Bias Controllers Extinction Ratio (db) -3-3 -4-4 -8-6 -4-2 2 4 6 8 1 DC voltage (V)
Fiber MXER-LN 1 GHz Very High Extinction Ratio Intensity Electrical Characteristics Parameter Symbol Condition Min Typ Max Unit Electro-optic bandwidth S 21 RF electrodes, from 2 GHz 1 12 - GHz Rise / fall times t r / t f Optical pulse, using DR-PL-MO - 3 3 ps Ripple S 21 DS 21 RF electrodes, f < 12 GHz -. 1 db Electrical return loss S 11 RF electrodes, - 12 GHz - -12 db Vp RF @ khz VpRF khz RF electrodes, @1 nm -. 6 V Vp RF @1 GHz VpRF 1 GHz RF electrodes, @1 nm - 6. 7 V Vp DC electrodes VpDC DC electrodes - 6. 7 V Impedance matching Z in-rf - - - W DC input impedance Z in-dc - 1 - - M W Optical Characteristics Parameter Symbol Condition Min Typ Unit Crystal - - Lithium Niobate X-Cut Y-Prop Operating wavelength l - 13 1 162 nm Insertion loss IL Without connectors - 4 db DC extinction ratio ER > 3 3 - - db ER > 3 Measured at 1 nm by default, for other l contact us 3 - - db ER > 4 4 - - db Optical return loss ORL - -4-4 -4 db Chirp a - -.1 -.1 - All specifications given at 2 C, 1 nm, unless differently specified 211/17 / V6 / IF / ixblue/mxer-ln-series Absolute Maximum Ratings Stresses in excess of the absolute maximum ratings can cause permanent damage to the device. These are absolute stress ratings only. Functional operation of the device is not implied at these or any other conditions in excess of those given in the operational sections of the data sheet. Exposure to absolute maximum ratings for extended periods can adversely affect device reliability. Parameter Symbol Min Max Unit RF input power EP in - 28 dbm Bias voltage V bias +2 V Optical input power OP in - 2 dbm Operating temperature OT +7 C Storage temperature ST -4 +8 C
Fiber MXER-LN 2 GHz Very High Extinction Ratio Intensity Electrical Characteristics Parameter Symbol Condition Min Typ Max Unit Electro-optic bandwidth S 21 RF electrodes, from 2 GHz 18 2 - GHz Rise / fall times t r / t f Optical pulse with DR-PL-MO - 2 2 ps Ripple S 21 DS 21 RF electrodes, f < 18 GHz -. 1 db Electrical return loss S 11 RF electrodes, - 18 GHz - -12 db Vp RF @ khz VpRF khz RF electrodes, @1 nm -. 6 V Vp DC electrodes VpDC DC electrodes - 6. 7 V Impedance matching Z in-rf - - - W DC input impedance Z in-dc - 1 - - M W Optical Characteristics Parameter Symbol Condition Min Typ Unit Crystal - - Lithium Niobate X-Cut Y-Prop Operating wavelength l - 13 1 162 nm Insertion loss IL Without connectors - 4 db DC extinction ratio ER > 3 3 - - db ER > 3 Measured at 1 nm by default, for other l contact us 3 - - db ER > 4 4 - - db Optical return loss ORL - -4-4 -4 db Chirp a - -.1 -.1 - All specifications given at 2 C, 1 nm, unless differently specified 311/17 / V6 / IF / ixblue/mxer-ln-series Absolute Maximum Ratings Stresses in excess of the absolute maximum ratings can cause permanent damage to the device. These are absolute stress ratings only. Functional operation of the device is not implied at these or any other conditions in excess of those given in the operational sections of the data sheet. Exposure to absolute maximum ratings for extended periods can adversely affect device reliability. Parameter Symbol Min Max Unit RF input power EP in - 28 dbm Bias voltage V bias +2 V Optical input power OP in - 2 dbm Operating temperature OT +7 C Storage temperature ST -4 +8 C
Fiber Typical S 21 Curve Typical S 11 Curve Electro-optical S S21 (db) 21 (db) 1 1 2 Frequency (GHz) S11 S 11 (db) -3 1 1 2 Frequency (GHz) Extinction Ratio Generated 8 ps Optical Pulse Extinction Ratio (db) -3-3 -4-4 -8-6 -4-2 2 4 6 8 1 DC voltage (V) Stability with Time and Temperature Insertion Loss with Time and Temperature 8. 1 411/17 / V6 / IF / ixblue/mxer-ln-series Bias voltage variation (V) 6. 4. 2.. -2. -4. -6. -8. 2 4 6 8 1 12 14 16 18 2 Elapsed time scale (Hours) C 3 C C Insertion loss variation (db).6.2 -.2 -.6-1 2 4 6 8 1 12 14 16 18 2 Elapsed time scale (Hours) 3 C C C
Fiber Mechanical Diagram and Pinout M1,6x.3-6H min 6,max (x4) 12 All measurements in mm 1 9,6 82 4,7 6 6,3 4, 4, 2,2 (x2) 2, 32,84,8 14 2, 2, Port Function Note IN OUT Optical input port Optical output port Polarization maintaining fiber, Corning PM 1-U2D, Length 1. meter. Buffer diameter 9 mm Polarization maintaining fiber, Corning PM 1-U2D, Length 1. meter. Buffer diameter 9 mm RF RF input port Wiltron female K (SMA compatible) 1 Ground Pin feed through diameter 1. mm 2 DC Pin feed through diameter 1. mm 3, 4 Photodiode cathode, anode Pin feed through diameter 1. mm 8 9,8 11/17 / V6 / IF / ixblue/mxer-ln-series Ordering information About us MXER-LN-BW-XX-Y-Z-AB-CD-xxdB BW = Bandwidth : 1 1 GHz 2 2 GHz XX = Internal photodiode PD, : Not integrated PD : Integrated Y = Input fiber : P Polarization maintaining S Standard single mode Z = Output fiber : P Polarization maintaining S Standard single mode AB = Input connector : bare fiber FA FC/APC FC FC/SPC CD = Output connector : bare fiber FA FC/APC FC FC/SPC xxdb = Extinction ratio : 3 3 db - 3 3dB - 4 4dB Note : optical connectors are Senko with narrow key or equivalent ixblue Photonics includes ixblue ixfiber brand that produces specialty optical fibers and Bragg gratings based fiber optics components and ixblue Photline brand that provides optical modulation solutions based on the company lithium niobate (LiNbO 3 ) modulators and RF electronic modules. ixblue Photonics serves a wide range of industries: sensing and instruments, defense, telecommunications, space and fiber lasers as well as research laboratories all over the world. Ixblue reserves the right to change, at any time and without notice, the specifications, design, function or form of its products described herein. All statements, specification, technical information related to the products herein are given in good faith and based upon information believed to be reliable and accurate at the moment of printing. However the accuracy and completeness thereof is not guaranteed. No liability is assumed for any inaccuracies and as a result of use of the products. The user must validate all parameters for each application before use and he assumes all risks in connection with the use of the products 1_217_PT_SP_ED1