Model R198A 10 Gb/s Surface-Mount APD-TIA Receiver
|
|
- Preston Morrison
- 5 years ago
- Views:
Transcription
1 Model R198A 10 Gb/s SurfaceMount APDTIA Receiver Applications WDM applications SONET and 10 Gb/s Ethernet 1527 transponders Very dense line cards Features R198A 10 Gb/s APD Rx +3.3 V TIA supply 27 dbm typical sensitivity 1 dbm typical overload RoHS compliant High gain, 3.7 kω typical, singleended Telcordia Technologies TM GR 468 compliant Very small, surfacemount form factor 105 mw typical power consumption The R198A receiver integrates a 10 Gb/s APD and TIA into a true surfacemount package. It is part of the industry s first multisource agreement (MSA) to standardize surfacemount 10 Gb/s receivers. These compact receivers can be mounted directly to a printed circuit board, thus avoiding the space, routing, and EMI problems of a mechanical cutout. The output voltages are ac coupled internal to the component package. The R198A provides features to optimize for WDM applications, most notably, flat group delay, a +3.3 V supply requirement, and low power consumption. The R198A uses BiSn solder and is compliant with all criteria of the Restriction of the Use of Hazardous Substances in Electrical and Electronic Equipment (RoHS) guidelines 2002/95/EC. Performance Highlights Parameter Min Typ Max Units Sensitivity dbm Overload 4 1 dbm Transimpedance (singleended) kω TIA Supply Voltage V TIA Supply Current ma APD Bias Voltage V Operating Case Temperature C Optical Wavelength 1610 nm Power Consumption mw Performance at 25 C. See following pages for complete specifications and operating conditions. For more information on this and other products: Contact Sales at Ortel , or visit
2 Absolute Maximum Ratings Stresses in excess of the absolute maximum ratings can cause permanent damage to the device. These are absolute stress ratings only. Functional operation of the device is not implied at these or any other conditions in excess of those given in the operational sections of the data sheet. Exposure to absolute maximum ratings for extended periods can adversely affect device reliability. Parameter Symbol Min Max Unit Operating Case Temperature Range T op C Storage Case Temperature Range T stg C Optical Input Power P IN +3 dbm APD Bias Voltage V PD GND V br V TIA Supply Voltage V TIA V Relative Humidity (noncondensing) RH 85 % ESD Susceptibility (all pins) V 1. Based on humanbody model of R = 1500 W, C = 100 pf. In general, ESD precautions should be taken to avoid damage. Recommended Operating Conditions Parameter Symbol Min Typ Max Unit Operating Case Temperature T op C TIA Supply Voltage V TIA V APD Bias Voltage, M = 9, T op = 25 C M = 9, 5 C < T op < 80 C V PD Optical Wavelength λ nm V Block Diagram APD Transim. Amp PIN 10 OutP PIN 8 OutN PIN 16 Thermistor PIN 3, 4, 5, 13, 15 No Connection PIN 2 PIN 14 PIN 1, 6, 7, 9, 11, 12, 17 V PD GND V TIA 2
3 Electrical/Optical Characteristics 1 Parameter Symbol Condition Min Typ Max Unit Sensitivity 2 25 C, M = 9 5 C to +80 C, M = 9 Overload 2 25 C, M = L 5 C to +80 C, M = L Responsivity R 1550 nm 0.64 A/W Dark Current I D M = na Output Voltage V out Singleended, at overload, ER = 12 db mv pp Transimpedance Z t Small signal, singleended kω Bandwidth, Small Signal f 3dB M = 9, M = L, 3 db relative to 300 MHz 7.0 GHz Low Frequency Cutoff M = 9, M = L, 3 db relative to 1 MHz 50 khz S 21 Peaking 200 MHz 5 GHz, relative to 300 MHz db S 21 Dip 200 MHz 5 GHz, relative to 300 MHz db RF Return Loss S MHz 8 GHz 10 6 db Group Delay 3 GD 0.5 GHz to 5 GHz 0.5 GHz to 8 GHz Optical Return Loss ORL Not including connector 27 db Supply Current, V TIA I CC ma Power Consumption P diss mw Specified characteristics apply for the recommended operating conditions at beginning of life, 25 C, unless noted otherwise BER, PRBS, Gb/s, NRZ, λ = 1550 nm, ER > 12 db. 3. P in = 20 dbm, M = L, M = dbm dbm ps pp Pinout Pin Symbol Function 1 GND Case Ground 2 V PD Photodiode Bias 3 No connection 4 No connection 5 No connection 6 GND Case Ground 7 GND Case Ground 8 Outn Data Output (inverse) 9 GND Case Ground 10 OutP Data Output 11 GND Case Ground 12 GND Case Ground 13 No connection 14 V TIA TIA Bias 15 No connection 16 R th Thermistor 17 GND Case Ground 3
4 Outline Drawing Dimensions are in mm. 130 cm + 20 cm Conn. Conn 4
5 Ordering Information Model Number Options R198Axyyxxx Mechanical N Standard Connector and Fiber DA SCUPC connector, Hytrel, arbitrary color SA LCUPC connector, Hytrel, arbitrary color GA FCUPC connector, Hytrel, arbitrary color YA MU connector, Hytrel, arbitrary color DB SCUPC connector, PVDF, arbitrary color SB LCUPC connector, PVDF, arbitrary color GB FCUPC connector, PVDF, arbitrary color YB MU connector, PVDF, arbitrary color Fiber Length cm + 20 cm Information contained herein is deemed to be reliable and accurate as of issue date. EMCORE reserves the right to change the design or specifications of the product at any time without notice. Ortel, the Ortel logo, EMCORE, and the EMCORE logo are trademarks of EMCORE Corporation. ZZds.R198A Ortel, a division of EMCORE 2015 West Chestnut Street Alhambra, California Tel: Fax: Copyright EMCORE Corporation 5
2651A/2651E Broadband Photodiode
The 2651 provides the proven high performance of EMCORE s photodiode technology in a very practical, costeffective package. The 2651A features high linearity and low capacitance over a 1 GHz bandwidth.
More informationModel 1782 DWDM High Power CW Source Laser
Model 1782 DWDM High Power CW Source Laser Applications DWDM CATV The 1782 laser component is characterized for use as a CW optical source in CATV and DWDM networks. The 1782 is dccoupled with a builtin
More informationModel 1772 DWDM High Power CW Source Laser
Model 1772 DWDM High Power CW Source Laser Applications DWDM The 1772 laser component is characterized for use as a CW optical source in CATV and DWDM networks. The 1772 is dccoupled with a builtin TEC,
More informationModel 1955F/R/W Coaxial DFB Laser Diode
Model 1955F/R/W Coaxial 1550nm CWDM, 5 MHz 4000 MHz Emcore s Model 1955 DFB lasers offer a low cost solution for linear fiberoptic links. These components can be cooled with external thermoelectric coolers
More information7820C CATV Optical Receiver 200 MHz HFC Return Path
The 7820C optical receiver is a single-mode fiber pigtailed module featuring a low-noise, impedance-matched broadband photodiode and RF amplification. The device receives optical analog and/or digital
More information7820R Optical Receiver MHz RFoG Return Path
The 7820R RFoG return path optical receiver is a single-mode fiber pigtailed module featuring a low-noise, impedance-matched broadband photodiode and RF amplification. The device receives optical analog
More informationGb/s 1310 nm DML DFB Laser
1861 Gb/s 13 nm DML DFB Laser The 1861 directly-modulated laser (DML) is a cost-effective solution for Gb/s digital transmission of up to 60 km using traditional intra-city SMF-28 single-mode fiber links.
More information10 GBPS 1310NM PIN + PREAMP LC ROSA PACKAGE N LR-LC
Product Specification 10 GBPS 1310NM PIN + PREAMP LC ROSA PACKAGE PIN-1310-10LR-LC PRODUCT FEATURES LC ROSA PIN-1310-10LR-LC includes flex circuit High performance InGaAs PIN photodiode with separate transimpedance
More information1751A 1550 nm DWDM DFB Laser Module
1751A 1550 nm DWDM DFB Laser Module Applications Node capability Narrow transmitter housing Networks with limited fiber Architectures using separate optical wavelengths to carry targeted services Features
More information1751A 1550 nm DWDM DFB Laser Module
1751A 1550 nm DWDM DFB Laser Module Applications Node capability Narrow transmitter housing Networks with limited fiber Architectures using separate optical wavelengths to carry targeted services Features
More information1933 F/R/W Coaxial DFB Laser Diode
EMCORE s Model 1933 DFB lasers offer a low cost solution for linear fiber optic links. These components can be cooled with external thermoelectric coolers for high stability, or run without TEC s to reduce
More information1782 DWDM High Power CW Source Laser
The 1782 laser component is characterized for use as a CW optical source in CATV and DWDM networks. The 1782 is dccoupled with a builtin TEC, thermistor, and monitor photodiode. The device is mounted in
More information10Gb/s Coplanar PIN Preamp Receiver PT10GC
10Gb/s Coplanar PIN Preamp Receiver PT10GC The module consists of a PIN photodetector, a low noise preamplifier, a connectorized single-mode fibre pigtail and a hermetic metal package with coplanar output.
More information1955 F/R/W Coaxial DFB Laser Diode
EMCORE s Model 1955 DFB lasers offer a low cost solution for linear fiber optic links. These components can be cooled with external thermoelectric coolers for high stability, or run without TEC s to reduce
More information1782 DWDM High Power CW Source Laser
EMCORE s 1782 laser module is characterized for use as a CW optical source in CATV and DWDM networks. The 1782 is dccoupled with a builtin TEC, thermistor, and monitor photodiode. The device is mounted
More information43 Gb/s Balanced Photoreceiver BPRV2125(A)
Product Specification 43 Gb/s Balanced Photoreceiver BPRV2125(A) PRODUCT FEATURES Balanced receiver for DPSK Dual optical input Differential RF output DC- or AC coupled Threshold control option Hermetically
More information1935 F/R/W Coaxial DFB Laser Diode
OBand CWDM 5 MHz 4000 MHz EMCORE s Model 1935 DFB lasers offer a lowcost solution for linear fiber optic links. These components can be cooled with external thermoelectric coolers for high stability, or
More information28Gb/s Limiting PIN Coplanar Receiver
28Gb/s Limiting PIN Coplanar Receiver Features: 28Gb/s PIN receiver in common MSA compliant footprint Coplanar packaging enabling high density surface mount capability Adjustable receiver bandwidth and
More informationnm C-Band DWDM DFB Laser Module
The 1764 laser module is a Dense Wavelength Division Multiplexing (DWDM) laser for analog wireless and distributed antenna system (DAS) applications. It features a distributed-feedback (DFB) device that
More information1616A 1310 nm DOCSIS 3.1 DFB Laser Module
The 1616A 1310 nm DOCSIS 3.1 DFB laser module is designed for both broadcast and narrowcast analog applications. The 1616A laser module is compliant with the new DOCSIS 3.1 standard, supporting operational
More informationMTX510E Series 10Gb/s 1550nm Electro-absorption Modulated Laser (EML) 14 Pin Package with G-S-G RF Input
10Gb/s 1550nm Electro-absorption Modulated Laser (EML) 14 Pin Package with G-S-G RF Input The MTX510E series contain an electro-absorption modulated laser (EML) module consists of a multiquantum-well DFB
More informationModBox-CBand-NRZ series C-Band, 28 Gb/s, 44 Gb/s, 50 Gb/s Reference Transmitters
The is a family of Reference Transmitters that generate excellent quality NRZ optical data streams up to 28 Gb/s, 44 Gb/s, 50 Gb/s in the C-band. These transmitters produce very clean eye diagrams with
More informationDL47B3A 2.5 Gbps 1550 nm Direct Modulation DFB Laser Module
1 Technical Data Sheet August 2001 OPTOELECTRONICS DIVISION DL47B3A 2.5 Gbps 1550 nm Direct Modulation DFB Laser Module Features High-performance MQW DFB Laser Built-in TEC, Thermistor and Monitor PD 25Ω
More information1754C C-Band DWDM DFB Laser Module
The 1754C laser module is a Dense Wavelength Division Multiplexing (DWDM) laser for analog CATV applications. It features a distributedfeedback (DFB) device that has been designed specifically for radio
More informationParameter Symbol Min Typ Max Unit. Parameter Symbol Condition Min Typ Max Unit. Gain ripple - < 7 GHz - ±1.5 - db. = 8 V pp
The DR-DG-10-MO-NRZ is a driver module specially designed for 10 Gbps / 12.5 Gbps data transmission with NRZ format. It exhibits a 20 db gain and can deliver an output signal up to 8 V pp. The DR-DG-10-MO-NRZ
More informationModBox 850 nm 28 Gb/s NRZ 800 band ; 100 Mb/s - 28 Gb/s Reference Transmitter
Delivering Modulation Solutions 850 nm 28 Gb/s NRZ The -850nm-28Gbps-NRZ is an optical modulation unit that generates high performance NRZ optical data streams at 850 nm. The equipment incorporates a modulation
More informationProduct Specification OC-48 LR-2/STM L-16.2 Multirate 2x10 SFF Transceiver FTLF1621S1xCL
Product Specification OC-48 LR-2/STM L-16.2 Multirate 2x10 SFF Transceiver FTLF1621S1xCL PRODUCT FEATURES Up to 2.67Gb/s bi-directional data links Standard 2x10 pin SFF footprint (MSA compliant) Analog
More informationDR-DG-12-MO 12 Gbps NRZ Medium Output Voltage Driver
12 Gbps NRZ Medium Output Voltage The DR-DG-12-MO is a high performance versatile driver module designed for 2.5 Gbps up to 12.5 Gbps data transmission with NRZ or RZ format. It exhibits a 28 db gain and
More information10Gb/s CWDM Electro-absorption Modulated Lasers (EML) TOSA
10Gb/s CWDM Electro-absorption Modulated Lasers (EML) TOSA FGT9xx-Txxx-00 Description: The Fiber-Grid FGT9xx series EML TOSA modules consists of a multi-quantum-well laser and a monolithically integrated
More informationDR-DG-28-MO 28 Gbps NRZ Medium Output Voltage Driver
The is a driver module optimized for digital applications at 28 Gbps 32 Gbps data rate. It exhibits an output voltage of V pp and a broad bandwidth of 28 GHz. The is housed in a compact package that integrates
More informationModBox 1550 nm 44 Gb/s NRZ C, L bands ; 100 Mb/s - 44 Gb/s Reference Transmitter
Delivering Modulation Solutions The -1550nm-44Gbps-NRZ is an optical modulation unit that generates high performance NRZ optical data streams. The equipment incorporates a modulation stage based on a high
More informationDR-DG-40-MO 40 Gbps NRZ Medium Output Voltage Driver
The DR-DG-MO is a driver module optimized for digital applications at 40 Gbps 44 Gbps data rate. It exhibits an output voltage of.3 V pp and a broad bandwidth of 40 GHz. The DR-DG-MO is housed in a compact
More informationProduct Specification Gb/s RoHS Compliant Short Wavelength 2x5 SFF Transceiver. FTLF8519F2xTL
Product Specification 2.125 Gb/s RoHS Compliant Short Wavelength 2x5 SFF Transceiver FTLF8519F2xTL PRODUCT FEATURES Up to 2.125 Gb/s bi-directional data links Standard 2x5 pin SFF footprint (MSA compliant)
More informationProduct Specification OC-48 SR-1/STM S-16 Multirate 2x10 SFF Transceiver FTLF1321S1xTL
Product Specification OC-48 SR-1/STM S-16 Multirate 2x10 SFF Transceiver FTLF1321S1xTL PRODUCT FEATURES Up to 2.67Gb/s bi-directional data links Standard 2x10 pin SFF footprint (MSA compliant) Analog diagnostics
More informationModBox 1550 nm 12 Gb/s DPSK C, L bands ; 12 Gb/s Reference Transmitter & Receiver
Delivering Modulation Solutions The -1550nm-12Gbps-DPSK is an optical modulation unit that generates high performance DPSK optical data streams. The equipment incorporates a modulation stage based on a
More informationProduct Specification Gb/s RoHS Compliant Short Wavelength 2x5 SFF Transceiver. FTLF8519F2xCL. FTLF8519F2xCL
Product Specification 2.125 Gb/s RoHS Compliant Short Wavelength 2x5 SFF Transceiver FTLF8519F2xCL PRODUCT FEATURES Up to 2.125 Gb/s bi-directional data links Standard 2x5 pin SFF footprint (MSA compliant)
More informationSmall Integrated Transmitter Unit SITU2400-XZ
Small Integrated Transmitter Unit SITU2400-XZ 0.05 1 GHz, ITU-Grid DWDM Directly Modulated Self-Contained Transmitter Applications Cellular and PCS Antenna- Remoting Microwave Delay Lines Frequency Distribution
More informationModBox-CBand-DPSK series C-Band, 12 Gb/s Reference Transmitters
-CBand-DPSK series C-Band, 12 Gb/s Reference Transmitters The -CBand-DPSK is an optical modulation unit that generates high performance DPSK optical data streams up to 12.5 Gb/s. The equipment incorporates
More informationProduct Features. Applications. Descriptions. Ordering Information. Electrical Pin Description
Product Features Compliant with ITU-T G.691 STM-64 L-64.2 Compliant to IEEE Std 802.3-2005 10Gb Ethernet 10GBase-ZR/ZW XFP MSA Rev. 4.5 compliant Full digital diagnostic management interface XFP MSA package
More informationDR-AN-40-MO 40 GHz Analog Medium Output Voltage Driver
40 GHz Analog Medium Output Voltage The DR-AN-40-MO is a wideband RF non-inverting amplifier module designed for analog applications at frequencies up to 40 GHz. The DR-AN-40-MO is characterized by a low
More informationDR-DG-10-MO-NRZ 12.5 Gbps NRZ Medium Output Voltage Driver Module
12.5 Gbps NRZ Medium Output Voltage Module The DR-DG-10-MO-NRZ is a driver module specially designed for 10 Gbps / 12.5 Gbps data transmission with NRZ format. It exhibits a 20 db gain and can deliver
More information1612A/B 1310 nm DFB Laser Module
The 1612A/B 1310 nm forward path DFB laser modules are designed for both broadcast and narrowcast analog applications. The highly linear OC48 pinout compatible devices feature options up to 31mW of minimum
More information2.1GHz. 2.1GHz 300nA RMS SFP OPTICAL RECEIVER IN+ MAX3748A IN- RSSI DISABLE LOS DS1858/DS1859 SFP. Maxim Integrated Products 1
19-2927; Rev 1; 8/03 RSSI (BW) 0.85pF 330nA 2mA P-P 2.7Gbps 2.1GHz +3.3V 93mW / 30-mil x 50-mil 580Ω TO-46 TO-56 MAX3748A Maxim RSSI MAX3748A DS1858/DS1859 SFP SFF-8472 2.7Gbps SFF/SFP (SFP) * 2.7Gbps
More informationProduct Specification OC-48 IR-1/STM S-16.1 Multirate 2x10 SFF Transceiver FTLF1421S1xCL
Product Specification OC-48 IR-1/STM S-16.1 Multirate 2x10 SFF Transceiver FTLF1421S1xCL PRODUCT FEATURES Up to 2.67Gb/s bi-directional data links Standard 2x10 pin SFF footprint (MSA compliant) Analog
More informationHFD Fiber Optic LAN Components 1.25Gbps PIN Plus Preamplifier with RSSI
with RSSI FEATURES rates > 1 GHz PIN detector, preamplifier, and bypass filtering in a TO-46 hermetic package 5V or 3.3V operation GaAs PIN detector and Transimpedance amplifier Differential Output for
More information1752A 1550 nm DOCSIS 3.1 DWDM DFB Laser Module
Applications Node Capability Narrow Transmitter Housing Networks with Limited Fiber Architectures Using Separate Optical Wavelengths to Carry Targeted Services Features DOCSIS 3.1 compliant 1.2 GHz Bandwidth
More informationPRODUCT DATASHEET CGY2102UH/C Gb/s TransImpedance Amplifier DESCRIPTION FEATURES APPLICATIONS
PRODUCT DATASHEET 2.5 Gb/s TransImpedance Amplifier DESCRIPTION The CGY2102UH is a high performance 2.5 Gb/s TransImpedance Amplifier (TIA). Typical use is as a low noise preamplifier for lightwave receiver
More informationData Sheet. Description. Features. Transmitter. Applications. Receiver. Package
AFBR-59F1Z 125MBd Compact 650 nm Transceiver for Data Communication over Polymer Optical Fiber (POF) cables with a bare fiber locking system Data Sheet Description The Avago Technologies AFBR-59F1Z transceiver
More informationFirst Sensor Evaluation Board Data Sheet Part Description MOD Order #
FOTO Input + 5 DC voltage Optical input (optional C-mount for lens) Mechanical potentiometer for APD-bias setting Output 16 channels voltage signal of amplified APD (300 MHz bandwidth and additional gain
More informationPigtailed PIN-TIA Receivers TPT4Gxx series
Receivers TPT4Gxx series PIN-TIA with low-noise transimpedance amplifier 2.5Gbps Operation voltage 3.3V to 5V Detection wavelength range of 1.1µm to 1.6µm SMF Pigtailed SC, FC, LC or ST Connector Family
More informationSFF-3Gx-TX2 Rugged Gb/s Dual Channel SFF Transmitter Dual Channel Fiber Transmitter
SFF-3Gx-TX2 Features: Multi-Rate Compliant for FC-PI-2 Fibre Channel, ARINC 818, Infiniband 850nm Oxide VCSEL Lasers Industrial temperature range standard: -40 C to +85 C Extended temperature range optional:
More informationXFP-10GB-EZR (OC192) 10GB Multirate DDMI XFP 1550nm cooled EML with APD Receiver 120km transmission distanc 10GB Multirate DDMI XFP
Feature XFP MSA Rev 4.5 compliant 120km Reach on SMF-28 fi ber utilizing Electronic Dispersion Compensation (EDC) Supports 9.95, 10.31, 10.52, 10.7 and 11.1Gb/s XFI High Speed Electrical Interface Digital
More informationModBox-1310nm-1550nm-NRZ 1310nm & 1550 nm, 28 Gb/s, 44 Gb/s Reference Transmitters
light.augmented ModBox-1310nm-1550nm-NRZ The -1310nm-1550nm-NRZ series is a family of Reference Transmitters that generate at 1310 nm and 1550 nm excellent quality NRZ optical data streams up to 28 Gb/s,
More information20 GHz High Power, High Linearity Photodiode Part #ARX zz-DC-C-FL-FC
Ver 2a, 4-25-2018 Product Specification 5800 Uplander Way Culver City, CA 90230 Tel: (310) 642-7975 sales@apichip.com www.apichip.com 20 GHz High Power, High Linearity Photodiode Part #ARX-20-50-zz-DC-C-FL-FC
More informationData Sheet. AFBR-S10TR001Z Compact 650 nm Analog Transceiver with Compact Versatile-Link Connector for Sensing Over POF. Description.
AFBR-STRZ Compact 65 nm Analog Transceiver with Compact Versatile-Link Connector for Sensing Over POF Data Sheet Description Avago Technologies' AFBR-STRZ transceiver provides system designers with the
More informationRJ-3G-RX2 Rugged RJ Size Fiber Optic Dual Receiver Fiber Optic Dual Receiver
RJ-3G-RX2 Rugged RJ Size Features: Compliant to ARINC 818 1.0625 Gb/s and 3.1875 Gb/s data rates Dual 850nm VCSEL PIN receiver Rugged LC connector housing including screw mounted OSAs 1x10 connector pinout
More informationLinkPower LPS LC MM 2630C/2630I. RoHS Compliant 1.25Gbps 850nm 550M Optical Transceiver
LinkPower LPS LC MM 2630C/2630I RoHS Compliant 1.25Gbps 850nm 550M Optical Transceiver Product Features 1. Supports 1.25Gbps/1.0625Gbps bit rates 2. Duplex LC Multimode connector 3. Hot pluggable SFP footprint
More informationProduct Specification Gb/s RoHS Compliant Short-Wavelength 2x7 SFF Transceiver. FTLF8524E2xNy
Product Specification 4.25 Gb/s RoHS Compliant Short-Wavelength 2x7 SFF Transceiver FTLF8524E2xNy PRODUCT FEATURES Up to 4.25 Gb/s bi-directional data links 2x7 pin SFF-like footprint Built-in digital
More informationLX21 100Mb/s to 1.25Gb/s BX-U
Product Features Compliant with IEEE Std 802.3-2005,1000BASE- Compliant with SFF-8074i andsff-8472, revision 9.5 Compliant with SFP MSA Specification Digital Diagnostic Monitoring available Uncooled 1310nm
More informationProduct Specification OC-12 SR-1/STM I-4 or OC-12 IR-1/STM S-4.1 2x5 SFF Transceiver FTLF1322F2xTR
Product Specification OC-12 SR-1/STM I-4 or OC-12 IR-1/STM S-4.1 2x5 SFF Transceiver FTLF1322F2xTR PRODUCT FEATURES Up to OC-12/STM-4 bi-directional data links Standard 2x5 pin SFF footprint (MSA compliant)
More information1.25Gbps/2.5Gbps, +3V to +5.5V, Low-Noise Transimpedance Preamplifiers for LANs
19-4796; Rev 1; 6/00 EVALUATION KIT AVAILABLE 1.25Gbps/2.5Gbps, +3V to +5.5V, Low-Noise General Description The is a transimpedance preamplifier for 1.25Gbps local area network (LAN) fiber optic receivers.
More informationBR-43. Dual 20 GHz, 43 Gbit/s Balanced Photoreceiver
Dual 20 GHz, 43 Gbit/s Balanced Photoreceiver The Optilab, a dual balanced 20 GHZ linear photoreceiver, is a differential front end featuring high differential gain of up to 5000 V/W. With a high Common
More information** Dice/wafers are designed to operate from -40 C to +85 C, but +3.3V. V CC LIMITING AMPLIFIER C FILTER 470pF PHOTODIODE FILTER OUT+ IN TIA OUT-
19-2105; Rev 2; 7/06 +3.3V, 2.5Gbps Low-Power General Description The transimpedance amplifier provides a compact low-power solution for 2.5Gbps communications. It features 495nA input-referred noise,
More informationProduct Features. Applications. Descriptions. Ordering Information. Pin Description
Product Features Compliant with IEEE Std 802.3-2005,1000BASE-BX-U Compliant with SFF-8074i andsff-8472, revision 9.5 Compliant with SFP MSA Specification Digital Diagnostic Monitoring available Uncooled
More information1622A/B CWDM DFB Laser Module
The 1622A/B ITU G.695 compliant CWDM forward path DFB laser components are designed for both broadcast and narrowcast analog applications. The highly linear, OC48 pinout compatible components feature options
More informationMITSUBISHI (OPTICAL DEVICES) MF-2500STA-xxxxx MF-2500SRA-xxxxx MF-2500SRB-xxxxx SONET / SDH TRANSMITTER / RECEIVER MODULE
DESCRIPTION This product is designed to provide high optical performance for SDH STM-16/SONET OC-48. Transmitter uses uncooled laser module with drivered by specific integrated circuit. Receiver uses PD
More informationModBox-CBand-28Gb/s-DPSK C-Band, 28 Gb/s DPSK Reference Transmitter
-CBand-28Gb/s-DPSK FEATURES Full C-Band Reference Transmitter Up to 28 Gb/s Reliable & reproducible measurements High eye diagram stability APPLICATIONS Transmission system test Components characterization
More informationHIGH POWER DFB LASERS
HIGH POWER DFB LASERS Single frequency lasers in 14-pin butterfly package AA1401 SERIES INCLUDING AA1402, AA1406, AA1408, and AA1415 The Gooch & Housego high power distributed feedback laser (DFB) is an
More informationDR-DG-20-MO 20 Gbps NRZ/RZ High Performance Driver Module
North American Distributor light.augmented DR-DG-20-MO The Photline DR-DG-20-MO is a high performance versatile driver module designed for 2.5 Gbps up to 20 Gbps data transmission with NRZ or RZ format.
More information1751A 1550 nm DWDM DFB Laser Module
CATV Applications Node Capability Narrow Transmitter Housing Networks with Limited Fiber Architectures Using Separate Optical Wavelengths to Carry Targeted Services Features Standard ITU Grid Wavelengths
More informationLX8501CDR 100G 100m QSFP28 Transceiver 100GBASE-SR4
Product Features Compliant with IEEE Std 802.3bm,100G BASE SR4 Ethernet Compliant with QSFP28 MSA Management interface specifications per SFF-8636 Single MPO connector receptacle 4 channels 850nm VCSEL
More informationDR-DG-10-HO. 10 Gbps High Output Voltage Driver Module. Digital Driver. Features. Performance Highlights. Applications Gbps Output Response
The DR-DG-10-HO is a driver module optimized for digital applications requiring an upper operation voltage at 10 Gbps - 12.5 Gbps. It exhibits 12.5 V pp output volatge and 35 db gain up to 7 GHz. The DR-DG-10-HO
More informationCALY LC nm 10 Gbps DFB LC TOSA with Flex
CALY34-12-9-LC-31-01 1310 nm 10 Gbps DFB LC TOSA with Flex Overview Advanced Lab Instruments CALY34-12-9-LC-31-01 1310 nm 10Gb/s DFB Laser LC-TOSA (Transmitter Optical Sub-Assembly) is designed for 10Gb/s
More informationModBox-CBand-10Gb/s-MultiFormats C-Band, Multi-formats 10 Gb/s Optical Reference Transmitter
The is an Optical Reference Transmitter that generates excellent quality optical data streams up to 10 Gb/s in the C & L Bands. The equipment incorporates two LiNbO 3 modulators (a pulse carver combined
More informationFeatures: Applications: Description:
Monolithic MZM Tunable TOSA APD Receiver Supports 50GHz ITU Grid C-Band with a wavelength locker Duplex LC connector Power supply voltages : +3.3V Temperature range 0 C to 70 C Power dissipation:
More informationOC-48 LR-2/STM L-16.2 RoHS Compliant Pluggable SFP Transceiver
OC-48 LR-2/STM L-16.2 RoHS Compliant Pluggable SFP Transceiver PRODUCT FEATURES Up to 2.67Gb/s bi-directional data links Hot-pluggable SFP footprint Built-in digital diagnostic functions Uncooled 1550nm
More informationCoaxial Analog PIN Detector Module with Pigtail
Coaxial Analog PIN Detector Module with Pigtail Description LH1xxx series are high responsibility and high linearity PIN photodiodes. The products features: Low capacitance, low dark current and high optical
More informationData Sheet. AFBR-1150L / AFBR-2150L Fiber Optic Transmitter and Receiver for 150 Mbit/s MOST. Features. Description. Applications.
AFBR-1150L / AFBR-2150L Fiber Optic Transmitter and Receiver for 150 Mbit/s MOST Data Sheet Description MOST150 transmitter and receiver are designed to transmit/ receive up to 150 MBit/s optical data
More information10Gb/s 10Km CDR SFP+ 1310nm Transceivers
Features l Compliant to SFP+ MSA l Fully RoHS Compliant l All metal housing for superior EMI performance l IPF compliant mechanics (SFF-8432 Rev 5.0) l CDR with 9.95 to 11.3Gbps l Uncooled DML DFB Laser
More informationPart Number Transmitter Output Power Receiver Sensitivity Reach Temp DDM RoHS
Product Features Compliant to ITU-T G.957 STM-16 S-16.1 Specifications according to SFF-8074i and SFF-8472, revision 9.5 Digital Diagnostic Monitoring available Uncooled 1310nm DFB Laser Up to 2.67Gb/s
More informationLaser TX/RX. Laser. Fiber Temp Rate. (nm)
Features: Supports 9.95Gb/s to 11.3Gb/s bit rates Single LC connector Built-in digital diagnostic functions Case Operating Temperature: Standard: 0 to 70 C Complaint with IEEE 802.3ae 10GBASE-LR/LW Compliant
More informationUK - SFP MONOMODO 20 KM 1310 NM. DTS3112L - C(D)
Description Datocom 1 DTS3112L-C(D)20 optical transceivers are designed for GE/1 x FC optical interface for data communications with single mode fiber (SMF), and multimode fiber (MMF) as well. They operate
More informationApplications. Features. Data Sheet FRL15TCWx-D86-xxxxxA Apr Full Band Tunable DFB Laser Module
Full Band Tunable DFB Laser Module Applications Long Haul or Metropolitan DWDM Transmission Systems Dynamic Wavelength Provisioning and Add/Drop Multiplexer Descriptions FRL15TCWx-D86 series is full band
More informationUp to 720 mw Fiber Bragg Grating Stabilized 980 nm Pump Modules. S30 Series
Up to 720 mw Fiber Bragg Grating Stabilized 980 nm Pump Modules S30 Series www.lumentum.com Data Sheet The Lumentum S30 Series pump laser module leverages a revolutionary design and lean manufacturing
More information5200 Series 3 GHz Fiber Optic Links
The 5200 Series 3 GHz Fiber Optic InterFacility Link (IFL) is a highperformance, costeffective alternative to coaxial cable for 20 MHz to 3000 MHz communications applications. EMCORE s fiber optic IFLs
More informationModBox-OBand-56GBaud-PAM4 O-Band, 56 Gbaud PAM-4 Reference Transmitter
-OBand-5GBaud-PAM4 O-Band, 5 Gbaud PAM-4 Reference Transmitter The -OBand-5Gbaud-PAM4 is a 4-level Pulse Amplitude Modulation (PAM-4) Optical Reference Transmitter that generates in the O-band excellent
More informationSFP+ 16G 1310nm Single mode Optical Transceiver
SFP+ 16G 1310nm Single mode Description The BlueOptics SFP+ transceiver is a high performance, cost effective module supporting a datarate up to 14.025Gbps with 10 Kilometer link length on single mode
More informationSITU3022/ GHz Externally- Modulated Unamplified Transmitter
The EMCORE SITU3022/32 (Small Integrated Transmitter Unit) is a highperformance externallymodulated transmitter for applications from 50 MHz to 22 GHz. The SITU family is a fullyintegrated unit that contains
More informationLinkPower LPS SM BIDI 2612TC/2612TI & 2613RC/2613RI SC. RoHS Compliant 1.25G 1310/1550nm & 1550/1310nm 20km Transceivers
LinkPower LPS SM BIDI 2612TC/2612TI & 2613RC/2613RI SC RoHS Compliant 1.25G 1310/1550nm & 1550/1310nm 20km Transceivers Product Features 1. Supports 1.25Gbps/1.0625Gbps bit rates 2. Bi-Directional, BIDI,
More informationProduct Bulletin. 2 mw WDM Laser for Direct Modulation in Links up to 100 km CQF915/108 Series
Product Bulletin 15/108-19 927 70 2 mw WDM Laser for Direct Modulation in Links up to 100 km CQF915/108 Series The JDS Uniphase CQF915/108 is a low power, directly modulated laser source in a butterfly
More informationData Sheet. AFBR-1310Z / AFBR-1310xZ Fiber Optic Transmitter for Multi GHz Analog Links. Description. Features. Specifications.
AFBR-1310Z / AFBR-1310xZ Fiber Optic Transmitter for Multi GHz Analog Links Data Sheet Description The AFBR-1310xZ is a compact, high performance, cost effective transmitter for multi GHz analog communication
More informationD1861A 10 Gbits/s 1310 nm DML Module
D1861A 10 Gbits/s 1310 nm DML Module Description The D1861A direct-modulated laser (DML) module is a cost-effective solution for 10 Gbits/s digital transmission up to 50 km using traditional intracity
More information1.25Gb/s 160km DWDM SFP Transceiver (OP340GD-D ) Hot Pluggable, Duplex LC, 100GHz, DWDM DFB & APD, Single-mode, DDM
DWDM 100GHz ITU Grid C Band Available DWDM DFB laser transmitter APD receiver Single +3.3V Power Supply Monitoring Interface Compliant with SFF-8472 Low power dissipation
More information1925 LMM PRELIMINARY. 10 Gb/s Electro-Absorptive Integrated Laser Modulator Optical Sub-Assembly 1600 ps/nm TDM LC receptacle & FPC Preliminary
1925 LMM PRELIMINARY Features: InGaAsP monolithically integrated DFB laser and modulator in-house chip Low drive voltage (
More informationULTRAPAK 10 DWDM Optoelectronics Subsystem. General Description. Features. Applications. Figure 1. UltraPak 10 Subsystem
General Description The ULTRAPAK 10 DWDM is a highly integrated optoelectronics subsystem that includes a 10 Gbit/s External Modulated optical transmitter, a 10 Gbit/s PIN or APD optical receiver and a
More informationROHS Compliant MM SFP Transceiver 1.25Gb Gigabit Ethernet
Product Overview WFT s SFP transceiver modules is specifically designed for the high performance and cost-effectiveness integrated duplex data link over a single fiber. The high-speed laser diode and photo
More informationG-PON ONU Small Form-Factor Transceiver
G-PON ONU Small Form-Factor Transceiver GPN Features Compliant with ITU-T G.984.2 Class B+ Tx 1310 nm/rx 1490 nm 2X5 pins Small Form Factor style package/smf Pigtail with SC/APC Connector Wave Solderable
More informationOptiva OTS-2 18 GHz Amplified Microwave Band Fiber Optic Links
MHz to 18 GHz Amplified Microwave Transport System The Optiva OTS-2 18 GHz Microwave Band transmitter and receiver are ideal to construct transparent fiber optic links in the MHz to 18 GHz frequency range
More informationOptiva OTS-2 40 GHz Amplified Microwave Band Fiber Optic Links
2 GHz to 4 GHz Amplified Microwave Transport System The Optiva OTS-2 4 GHz Microwave Band transmitter and receiver are ideal to construct transparent fiber optic links in the 5 MHz to 4 GHz frequency range
More informationPart Number Transmitter Output Power Receiver Sensitivity Reach Temp DDM RoHS
Product Features Compliant with IEEE Std 802.3-2005 10G Ethernet 10GBase-LR/LW Electrical interface specifications per SFF-8431 Management interface specifications per SFF-8431 and SFF-8472 SFP+ MSA package
More information