PowPak Receptacle Control Relay Modle The PowPak Relay Receptacle Control Modle is a radio-freqency (RF), receptacle switching soltion that is capable of controlling receptacles based on inpt from Pico remote controls and Radio Powr Savr occpancy sensors. Commnication with RF inpt devices, sch as Pico remote controls and / or Radio Powr Savr occpancy / vacancy sensors, is accomplished sing Ltron Clear Connect RF Technology. These prodcts are also compatible with the Vive hb which enables a simple setp process sing a standard web browser on any Wi-Fi enabled phone, tablet or compter. The hb also enables control and monitoring of all Vive devices. The Vive hb can be added at any time. System reprogramming will be reqired. For a complete list of featres spported with the Vive hb, see specification sbmittal 369902. Note for Replacement: RMJS-20R-DV-B or RMJS-20RCCO1DV-B can replace RMJ-H20R-DV-B. NOTE: Not intended for control of permanently installed lighting fixtres. Featres Softswitch: Ltron patented technology prevents arcing of relay contacts, extending prodct lifetime Optional low-voltage dry contact closre otpt provides integration to HVAC, VAV, etc. Receives wireless inpts from p to 10 Pico remote controls, and 10 Radio Powr Savr occpancy / vacancy sensors RoHS Compliant 369966d 1 03.07.17 RMJS-20RCCO1DV-B model shown Able to control receptacles Capable of switching general-prpose loads Utilizes Ltron Clear Connect RF Technology Monts to a U.S. style jnction box throgh a standard 1/2 in (12.7 mm) size knockot Incldes reqired controlled otlet labels for code compliance Model Nmbers Description Model Nmber Region Operating Voltage Freqency Band PowPak Receptacle RMJS-20R-DV-B USA, Canada, Mexico 120 / 277 V~ 431.0 437.0 MHz Control Relay Modle (TAA/NAFTA approved) PowPak Receptacle Control Relay Modle with Contact Closre Otpt RMJS-20RCCO1DV-B USA, Canada, Mexico (TAA/NAFTA approved) 120 / 277 V~ 431.0 437.0 MHz
Specifications Reglatory Approvals UL 508 Listed (USA) FCC approved. Complies with the limits for a Class B device, prsant to Part 15 of the FCC rles. (USA) IC (Canada) CSA compliant (Canada) NOM and COFETEL compliant (Mexico) Complies with reqirements for se in other spaces sed for environmental air (plenms) per NEC 2014 300.22(C)(3) Listed in accordance to CAN/ULC S102.2-2010 with a Flame Spread Rating of 0 and a Smoke Developed Classification of 40, with a minimm spacing of 6 ft (1.83 m) off center 369966d 2 03.07.17 Environment Ambient operating temperatre: 32 F to 131 F (0 C to 55 C) 0% to 90% hmidity, non-condensing For indoor se only All drivers and ballasts sed with Vive wireless controls mst comply with the limits for a Class A device prsant to Part 15 of the FCC Rles Softswitch Patented Softswitch circit eliminates relay arcing at mechanical contacts Otpt is non-latching Power Operating voltage: 120 / 277 V~ 50/60 Hz Standby Power Consmption (all models): < 1.25 W Load Type Tngsten AC General Use Resistive Indctive Motor Relay Ratings 120 277 V~ single phase only RMJS-20R-DV-B RMJS-20RCCO1DV-B 1.0 HP 120 V~ 2.0 HP 277 V~ System Commnication Operates sing Clear Connect RF Technology for reliable wireless commnication. RF range is 30 ft (9 m) Wireless sensors and controls mst be located within 60 ft (18 m) line of sight, or 30 ft (9 m), throgh walls, of the associated control modle. The 60 ft (18 m) range is not redced by a ceiling tile obstrction.
Specifications (contined) Load ; No minimm load reqirements. Rated to control 20 A receptacles. Motor rating: 1.0 HP (120 V~), 2.0 HP (277 V~) The Receptacle Control Relay Modle may be sed with, bt is not limited to, the following: Monitors Fans Hmidifiers Printers NOTE: Refer to the manfactrer s gidelines for acceptable switching methods. The Receptacle Control Relay Modle may NOT be sitable for se with devices that reqire any of the following: Sht-down process before power is interrpted, sch as compters. Cool-down process before power is interrpted, sch as projectors. Programming, sch as clocks or DVRs. Long warm-p cycle. Not for se with loads that present a hazard if atomatically energized. For example, heaters. Any receptacles that are controlled by an atomatic control device mst be marked with located on the controlled receptacle otlet where visible after installation as stated in 2014 NECR Article 406.3(E). NOTE: Labels with this marking are inclded with the prodct. 369966d 3 03.07.17 Contact Closre Otpt (CCO version only) Provides occpancy stats to 3rd-party eqipment sch as bilding management systems, HVAC, and VAV controllers Provides both normally open (NO) and normally closed (NC) dry contacts Maintained otpt type CCO terminals accept WG to 16 AWG (0.5 mm 2 to 1.5 mm 2 ) solid or stranded wire Otpt is latching Not for voltages greater than 24 V- The CCO is not rated to control nclamped, indctive loads. Indctive loads inclde, bt are not limited to, relays, solenoids, and motors. To control these types of eqipment, a flyback diode mst be sed (DC voltages only). See diagram below. For more information, please see Application Note #434 (P/N 048434) www.ltron.com/technicaldocmentlibrary/ 048434a.pdf Flyback Diode (reqired for indctive loads) NO CCO Otpt NC COM Indctive Load + - 24 V- max. Switching Voltage 0-24 V- 0-24 V~ Resistive Load R 1.0 A 0.5 A Key Design Featres LED stats indicator illminates when a btton is pressed and trns off 2 seconds after the btton is released Power failre memory: If power is interrpted, connected receptacles will retrn to the state prior to the power interrption. NOTE: Do not tie the CCO to grond.
Test Vive PowPak Receptacle Control Relay Modle Wireless Receptacle Control Dimensions Dimensions are shown as: in (mm) 1/2 in or 21 mm trade size knockot opening 369966d 4 03.07.17 3.94 (100) 3.42 (87) 2.82 (72) 1.25 (32) Range Diagrams PowPak Receptacle Control Relay Modle Install in center of room to maximize RF coverage. Radio Powr Savr occpancy sensor 30 ft (9 m) Maximm Pico remote control 30 ft (9 m) 40 ft (12 m) NOTE: Wireless sensors and controls mst be located within 60 ft (18 m) line of sight, or 30 ft (9 m), throgh walls, of the associated control modle. The 60 ft (18 m) range is not redced by a ceiling tile obstrction.
System Diagram 369966d 5 03.07.17 To power sorce and load Pico remote control (p to 10) Radio Powr Savr occpancy/vacancy sensor (p to 10) To 3rd-Party Eqipment Note: CCO models only Defalt Operation Transmitting Device Transmitted Command Softswitch Relay Defalt Action CCO Defalt Action Pico remote control Radio Powr Savr occpancy sensor Radio Powr Savr vacancy sensor On Close No Action Off Open No Action Raise No Action No Action Lower No Action No Action Preset Close No Action Occpied Close NO = Close, NC = Open Unoccpied Open NO = Open, NC = Close Occpied Close NO = Close, NC = Open Unoccpied Open NO = Open, NC = Close
Wiring Diagram - for Dplex Receptacle 369966d 6 03.07.17 Jnction Box LINE / HOT (Black) NEUTRAL (White) 120/ 277 V~ 50/60 Hz SWITCHED LINE / HOT (Red) ATTENTION INSTALLER Any receptacles that are controlled by an atomatic control device mst be marked with located on the controlled receptacle otlet where visible after installation as stated in 2014 NECR Article 406.3(E). Controlled Receptacle * NOTE: Labels with this marking are inclded with the prodct. NC NO COM To 3rd-party eqipment Uncontrolled Receptacle NOTE: Do not tie the CCO to grond. NOTE: Some applications (in USA) reqire the PowPak Receptacle Control Relay Modle to be installed inside an additional jnction box. For information abot how to perform this installation, please see Application Note #423 (P/N 048423) www.ltron.com/technicaldocmentlibrary/048423.pdf Please conslt all local and national electric codes for proper installation methods. * Important Note WARNING: Entrapment Hazard. To avoid the risk of entrapment, serios injry, or death, these controls mst not be sed to control eqipment which is not visible from every control location or which cold create hazardos sitations sch as entrapment if operated accidentally. WARNING: Fire Hazard. To avoid the risk of fire, serios injry, or death, these controls mst not be sed to control eqipment which is not visible from every control location or which cold create hazardos sitations sch as fire if operated accidentally. Examples of sch eqipment which mst not be operated by these controls inclde (bt are not limited to) motorized gates, indstrial doors, space heaters, etc. It is the installer s responsibility to ensre that the eqipment being controlled is visible from every control location and that only sitable eqipment is connected to these controls. Failre to do so cold reslt in serios injry or death.
Wiring Diagram - for Split-Wired Dplex Receptacle 369966d 7 03.07.17 Jnction Box LINE / HOT (Black) NEUTRAL (White) 120/ 277 V~ 50/60 Hz NEUTRAL (White) SWITCHED LINE / HOT (Red) Split-Wired Receptacle. * Note: This example is showing a split-wired receptacle. The top portion of the receptacle is not controlled by the Receptacle Control Relay Modle, while the bottom portion is switched by the Receptacle Control Relay Modle. ATTENTION INSTALLER Any receptacles that are controlled by an atomatic control device mst be marked with located on the controlled receptacle otlet where visible after installation as stated in 2014 NECR Article 406.3(E). NOTE: Labels with this marking are inclded with the prodct. NC NO COM To 3rd-party eqipment NOTE: Do not tie CCO to grond. NOTE: Some applications (in USA) reqire the PowPak Receptacle Control Relay Modle to be installed inside an additional jnction box. For information abot how to perform this installation, please see Application Note #423 (P/N 048423). www.ltron.com/technicaldocmentlibrary/048423.pdf Please conslt all local and national electric codes for proper installation methods. * Important Note WARNING: Entrapment Hazard. To avoid the risk of entrapment, serios injry, or death, these controls mst not be sed to control eqipment which is not visible from every control location or which cold create hazardos sitations sch as entrapment if operated accidentally. WARNING: Fire Hazard. To avoid the risk of fire, serios injry, or death, these controls mst not be sed to control eqipment which is not visible from every control location or which cold create hazardos sitations sch as fire if operated accidentally. Examples of sch eqipment which mst not be operated by these controls inclde (bt are not limited to) motorized gates, indstrial doors, space heaters, etc. It is the installer s responsibility to ensre that the eqipment being controlled is visible from every control location and that only sitable eqipment is connected to these controls. Failre to do so cold reslt in serios injry or death. )Ltron, Ltron, PowPak, Pico, Clear Connect, and Softswitch are trademarks of Ltron Electronics Co., Inc. registered in the U.S. and other contries. Vive and Radio Powr Savr are trademarks of Ltron Electronics Co., Inc. NEC is a registered trademark of the National Fire Protection Association, Qincy, Massachsetts.