ontacts, Tools, and ccessories able reduction sleeve REDUTION SLEEVEs FOR BLE Reduction Sleeve Length for use with Mechanical able lamp or Basketweave able Grip Shell Sleeve P/N Sleeve inner diameter [mm] Sleeve outer diameter [mm] Sleeve length [mm] Use for cable range [mm] Outer diameter Inner diameter 36 18 10SL D-3420-28 31.80 40.60 50.20 29.90 to 32.00 D-3420-24 28.50 33.90 51.10 23.40 to 28.50 D-3420-16 19.00 23.60 50.90 15.50 to 19.00 D-3420-12 13.74 18.50 50.90 11.30 to 13.74 D-3420-10 11.10 15.70 50.50 9.60 to 11.10 D-3420-6 7.93 10.50 50.50 5.84 to 7.93 D-3420-4 5.56 7.63 50.50 4.50 to 5.56 ssy Mechanical able lamp Seal Gland able ssy Basket Weave able Grip able Seal Gland Inner diameter Inner diameter Ex cable gland assembly, exploded view Inner Sheath Sealing rmor lamping Ring Outer Sheath Sealing Entry omponent Interlocking rmor one Gland Body Dome Nut Entry omponent Sealing Dome Nut 96 2017 Glenair, Inc 1211 ir Way, Glendale, 91201 818-247-6000 www.glenair.com U.S. GE code 06324 Marine/Subsea atalog
ontacts, Tools, and ccessories Pin crimp contacts pin crimp contacts Series 927-072 contacts for size #16s through size #0 wire. opper alloy with silver or gold plating, Terminate to wire with standard crimp tools. ontacts are frontrelease. Use in series 927-072 connectors. Pin contact with silver plating. For properties please consult table Materials on page 66 row Item rimp Socket and Pin ontacts. Highly conductive silver plating is ideal for high current applications. Pin contact with gold plating is used to improve protection from corrosive environments. For Electric properties, please consult table on page 66. [WG] Wire [WG] 16S* 18-16 16 18-16 12 12 Pin rimp ontacts Table Finish Pin ontact D-20-40553 D-21-40553 D-20-40557 D-21-40557 D-20-40560 D-21-40560 8 8 D-20-40792 4 4 D-20-113474-4P 0 0 D-20-113474-1P * S = short (see length contacts) ontact WG Pin ontact urrent Ratings and Resistance Max Rated urrent [] IW N.E.. (1) IW VG95234 (2) Max ontact Resistance [mw] 16 16s 16 20 6 12 30 32 3 8 50 60 1 4 90 120 0.5 0 155 220 0.3 (1) Non-circuit breaking contacts rated current as per N.E.. (National Electrical ode) based on arcing control. Use a cable of minimum rated temperature of 90. (2) Values extrapolated from rated current chart of VG95234-1, at ambient temperature of 40. 2017 Glenair, Inc 1211 ir Way, Glendale, 91201 818-247-6000 www.glenair.com U.S. GE code 06324 Marine/Subsea atalog 97
ontacts, Tools, and ccessories Pin crimp contacts Pin crimp contacts ontact D-10-40553 16S 1.23 (31.25) 0.06 (1.57) 0.29 (7.45) 0.12 (3.1) 0.07 (1.7) D-10-40557 16 1.44 (36.65) 0.06 (1.57) 0.31 (7.75) 0.12 (3.1) 0.07 (1.7) D-10-40560 12 1.65 (41.85) 0.09 (2.38) 0.33 (8.5) 0.19 (4.8) 0.10 (2.5) ontact D-10-40792 8 1.82 (46.2) 0.14 (3.59) 0.52 (13.3) 0.31 (7.8) 0.18 (4.5) ontact D-10-113474-4P 4 1.83 (46.4) 0.22 (5.7) 0.51 (12.9) 0.43 (11) 0.28 (7.15) ontact D-10-113474-1P 0 1.90 (48.3) 0.36 (9.05) 0.56 (14.1) 0.59 (15.1) 0.45 (11.5) 98 2017 Glenair, Inc 1211 ir Way, Glendale, 91201 818-247-6000 www.glenair.com U.S. GE code 06324 Marine/Subsea atalog
ontacts, Tools, and ccessories Socket crimp contacts socket crimp contacts Series 927-072 contacts for size #16s through size #0 wire. opper alloy with silver or gold plating, Terminate to wire with standard crimp tools. ontacts are frontrelease. Use in series 927-072 connectors. Socket contact with silver plating. For properties please consult table Materials on page 66 row Item rimp Socket and Pin ontacts. Highly conductive silver plating is ideal for high current applications. Socket contact with gold plating is used to improve protection from corrosive environments. For Electric properties, please consult table on page 66. [WG] Wire [WG] 16S* 18-16 16 18-16 12 12 Socket rimp ontacts Table Finish Socket ontact D-20-40552 D-21-40552 D-20-40556 D-21-40556 D-20-40560 D-21-40560 ontact type Spring clip Spring clip Spring clip 8 8 D-21-40793 Hood 4 4 D-21-113474-4S-1 Hood 0 0 D-21-113474-1S Hood * S = short (see length contacts) Other contact wire size on request. ontact WG Socket ontact urrent Ratings and Resistance Max Rated urrent [] Max ontact IW N.E.. (1) IW VG95234 (2) Resistance [mw] 16 16s 16 20 6 12 30 32 3 8 50 60 1 4 90 120 0,5 0 155 220 0,3 (1) Non-circuit breaking contacts rated current as per N.E.. (National Electrical ode) based on arcing control. Use a cable of minimum rated temperature of 90. (2) Values extrapolated from rated current chart of VG95234-1, at ambient temperature of 40. 2017 Glenair, Inc 1211 ir Way, Glendale, 91201 818-247-6000 www.glenair.com U.S. GE code 06324 Marine/Subsea atalog 99
ontacts, Tools, and ccessories Socket crimp contacts socket crimp contacts ontact D-10-40552 16S 1.05 (26.7) 0.13 (3.2) 0.30 (7.5) 0.13 (3.2) 0.07 (1.7) D-10-40556 16 1.44 (36.5) 0.13 (3.2) 0.31 (7.8) 0.13 (3.2) 0.07 (1.7) D-10-40560 12 1.48 (37.65) 0.19 (4.8) 0.33 (8.5) 0.19 (4.8) 0.10 (2.5) ontact D-10-40793 8 1.61 (40.8) 0.25 (6.45) 0.47 (12) 0.31 (7.8) 0.18 (4.58) ontact D-10-113474-4S-1 4 1.63 (41.35) 0.34 (8.57) 0.47 (12) 0.43 (11) 0.28 (7.15) ontact D-10-113474-1S 0 1.76 (44.8) 0.52 (13.2) 0.54 (13.8) 0.59 (15.1) 0.45 (11.5) 100 2017 Glenair, Inc 1211 ir Way, Glendale, 91201 818-247-6000 www.glenair.com U.S. GE code 06324 Marine/Subsea atalog
ontacts, Tools, and ccessories Wire hole sealing plugs for contact inserts and wire sealing grommets wire hole plug for contact inserts ontact Ø L olor D-10-305045-16 16S - 16 0.10 (2.6) 0.09 (2.2) 0.13 (3.2) 0.62 (15.7) Blue D-10-101033-13 12 0.18 (4.6) 0.15 (3.7) 0.13 (3.2) 0.47 (11.9) Yellow D-10-305045-8 8 0.30 (7.6) 0.25 (6.4) 0.12 (3.1) 0.46 (11.8) White D-10-305045-4 4 0.43 (10.9) 0.38 (9.7) 0.12 (3.1) 0.46 (11.8) Green D-10-305045-0 0 0.59 (15.0) 0.53 (13.5) 0.17 (4.3) 0.56 (14.3) Black Ø notes L Ø ontact Hole Plug - Insert Version. Used to fill an insert cavity in order to maintain the environmental seal when a cavity is without contact. L D-10-305045-16 D-10-101033-13 D-10-305045-XX wire hole plug for wire sealing grommets ontact Ø L olor D-10-101033-12 16S - 16 0.15 (3.7) 0.11 (2.8 0.13 (3.2) 0.47 (11.9) Blu / Blue D-10-101033-13 12 0.18 (4.6) 0.15 (3.7) 0.13 (3.2) 0.47 (11.9) Giallo / Yellow D-10-101033-14 8 0.23 (5.8) 0.20 (5.0) 0.13 (3.2) 0.47 (11.9) Bianco / White D-10-101033-15 4 0.33 (8.5) 0.30 (7.6) 0.13 (3.2) 0.47 (11.9) Verde / Green D-10-101033-16 0 0.53 (13.5) 0.50 (12.8) 0.13 (3.2) 0.47 (11.9) Nero / Black Ø notes ontact Hole Plug - Grommet Version. Used to fill a grommet cavity in order to maintain the environmental seal when a cavity is without contact. L D-10-101033-XX 2017 Glenair, Inc 1211 ir Way, Glendale, 91201 818-247-6000 www.glenair.com U.S. GE code 06324 Marine/Subsea atalog 101
ontacts, Tools, and ccessories rimp tools manual and pneumatic crimp tools Manual rimp Tool ontact Wire * Socket contact only ** Pin contact only Manual Tool Manual rimp Tool Turret Universal Locator Pneumatic Tool Pneumatic rimp Tool Type Turret Universal Locator 16s 16 M.105007 M.105009* M.105012** M.105002 M.105009* M.105012** 16 16 M.105007 M.105009* M.105012** M.105002 M.105009* M.105012** 12 12 M.105007 M.105009* M.105012** M.105002 M.105009* M.105012** 8 8 / / / / / / 4 4 / / / / / / 0 0 / / / / / / Turret Universal Locator Pneumatic rimp Tool Type Turret for Pneumatic rimp Tool Type Manual Tool Setting dimension Universal Locator ontact Wire Manual Tool Manual rimp Tool Universal Locator Setting dimension [mm] 16s 16 M.105007 M.105012 67.7 16 16 M.105007 M.105012 73.0 12 12 M.105007 M.105012 85.4 102 2017 Glenair, Inc 1211 ir Way, Glendale, 91201 818-247-6000 www.glenair.com U.S. GE code 06324 Marine/Subsea atalog
ontacts, Tools, and ccessories rimp tools for large contacts ontact insertion and removal tools Hydraulic and pneumatic crimp tools ontact Wire Hydraulic Tool Hydraulic rimp Tool Die Pneumatic Tool Pneumatic rimp Tool Die Type B Locator Pin 16s 16 / / / / / / 16 16 / / / / / / 12 12 / / / / / / Locator Socket 8 8 M.112004 M.112005 M.112000 M.112001 M.112308 M.112309 4 4 M.112004 M.112006 M.112000 M.112002 M.112307 M.112311 0 0 M.112004 M.112010 M.112000 M.112003 M.112306 M.112313 * Socket contact only ** Pin contact only Hydraulic rimp Tool Die for Oleodinamic rimp Tool Pneumatic rimp Tool Type B Die For Pneumatic rimp Tool Type B Locator for Pneumatic rimp Tool Type B insertion and removal tools ontact Insertion Tool Figure Removal Tool Figure 16S M.117083 M.118250 16 M.117083 M.118250 12 M.117082 M.118250 8 M.117344 B M.118260 D 4 M.117347 B M.118270 D 0 M.117348 B M.118280 D B D 2017 Glenair, Inc 1211 ir Way, Glendale, 91201 818-247-6000 www.glenair.com U.S. GE code 06324 Marine/Subsea atalog 103