Bandpass Edge Dichroic Notch & More

Edmund Optics BROCHURE Filters COPYRIGHT 217 EDMUND OPTICS, INC. ALL RIGHTS RESERVED 1/17 Bandpass Edge Dichroic Notch & More Contact us for a Stock or Custom Quote Today! USA: +1-856-547-3488 EUROPE: +44 () 194 78 ASIA: +65 6273 6644 JAPAN: +81-3-3944-621 www.edmundoptics.com/filters

Hard Coated Bandpass Interference Filters From Narrow Bandwidths for Life Science Lenses to Broad Bandwidths for Imaging and Lighting Available in UV, VIS, and IR Center Wavelengths High, OD 4 Blocking Long Lifetime, Extremely Durable TECHSPEC Hard Coated Bandpass Interference Filters are ideal for eliminating unwanted background noise and enhancing the signal to noise ratio for a range of applications including machine vision inspection, fluorescence microscopy, quantitative chemical applications, and a variety of diagnostic instrumentation. Unlike traditional filters, which require multiple substrates and coatings, these hard coated filters are fabricated using only a single substrate. This single substrate fabrication offers deeper blocking, higher transmission, and steeper slopes than traditional coated filters. Diameter Tolerance (mm): +./-.1 Mount Thickness (mm): 5 Surface Quality: -5 Blocking: OD >4 CWL Tolerance : ±2 FWHM Tolerance : ±2 Typical Energy Density: Limit for 532nm Filter: 1 J/cm 2 @ 532nm, 1ns TECHSPEC Hard Coated Bandpass Interference Filters Filter Type Range of CWL Options Peak Blocking Range Blocking Diameters Available (mm) 1nm Bandpass Filters 31-155 85 2-1 OD 4 12.5, 25, 5 25nm Bandpass Filters 4-155 9 2-1 OD 4 12.5, 25, 5 5nm Bandpass Filters 4-155 9 2-1 OD 4 12.5, 25, 5 Notch Filters OD 4 or 6 Rejection of Laser Wavelength Broad Range, Precision Blocking Ideal for Laser-Based Raman, Fluorescence, and Diagnostic Systems Featuring deep blocking and broad transmission bands, TECHSPEC Notch Filters are fabricated utilizing hard coating technology, guaranteeing durable coatings that will not degrade with time, temperature, or humidity. Each filter is mounted in a black anodized ring which has been engraved to ease filter handling, identification, and orientation. TECHSPEC Notch Filters are ideal for applications requiring deep blocking of a narrow range, and broad transmission of other wavelengths. OD >4 Notch Filters OD >6 Notch Filters OD >6 Multi Notch Filters Diameter Tolerance (mm): +./-.1 +./-.1 +./-.1 Thickness (mm): 5. ±.1 3.5 ±.1 3.5 ±.1 Reflectivity @ CWL (%): >99 >99.5 >99.5 Pass Band : >9 >%, 35-4nm >%, 35-4nm >9%, 4-12nm >9%, 4-12nm Transmitted Wavefront (RMS): 1λ <1λ <1λ techspec notch filters *Call for Availability CWL OD >4 Notch Filters OD >6 Notch Filters FWHM Range 12.5mm 25mm 5mm FWHM Range 12.5mm 25mm 5mm 355 17.8 ± 1.8 325-475 #67-16 #67-115 #67-124 * * * 45 2.2 ± 2. 325-54 #67-17 #67-116 #67-125 9. 35-12 #86-119 #86-124 #86-129 488 24.4 ± 2.4 365-65 #67-18 #67-117 #67-126 * * * 514.5 25.7 ± 2.6 385-685 #67-19 #67-118 #67-127 * * * 532 26.6 ± 2.7 4-7 #67-11 #67-119 #67-128 17. 35-12 #86-12 #86-125 #86-13 632.8 31.6 ± 3.2 475-845 #67-111 #67-12 #67-129 25. 35-12 #86-121 #86-126 #86-131 785 39.2 ± 3.9 585-145 #67-112 #67-121 #67-13 39. 35-12 #86-122 #86-127 #86-132 8 4. ± 6. - 17 #86-7 #86-72 #86-74 * * * 83 42. ± 6. 625-11 #86-71 #86-73 #86-75 * * * 9 49. ± 4.9 735-13 #67-113 #67-122 #67-131 * * * 164 53.2 ± 5.3-14 #67-114 #67-123 #67-132 73. 4-12 #86-123 #86-128 #86-133 COPYRIGHT 217 EDMUND OPTICS, INC. ALL RIGHTS RESERVED 1/17 techspec OD 6 Multi-Notch Filters for Nd:YAG Lasers CWL x FWHM Range 12.5mm Diameter 25mm Diameter 5mm Diameter Notch 1 Notch 2 Notch 3 Stock No. Stock No. Stock No. 355 x 1 532 x 25 N/A 325-12 #87-15 #87-19 #87-23 532 x 25 164 x 5 N/A 4-12 #87-17 #87-21 #87-25 355 x 1 532 x 25 164 x 5 37-12 #87-18 #87-22 #87-26

Narrow Bandwidths for Gas and Solid State Lasers Hard Coated Laser Clean-Up Filters Broad Bandwidths for Laser Diode Clean-Up High, OD 4 and OD 6 Blocking TECHSPEC Hard Coated Laser Clean-Up Filters provide high transmission, deep blocking, and are perfectly tuned for today s high performance laser systems. The filters feature hard, durable coatings on a single substrate, ensuring reliable performance and extended lifetimes. OD >4 Laser Line Filters OD >6 Laser Line Filters Thickness (mm): 3.5 ±.1 3.5 ±.1 Diameter Tolerance (mm): +./-.1 +./-.1 Clear Aperture (%): >9 >9 Transmitted Wavefront (RMS): l/4 l/4 Surface Quality: -4-4 Angle of Incidence ( ):. ±5.. ±2. Coating: Hard Sputtered Hard Sputtered 532nm Laser Line Bandpass Filter 1 9 7 5 4 3 2 1 425 475 525 575 625 675 techspec od 4 laser clean-up FILTERS CWL Bandwidth Min. 12.5mm Diameter 25mm Diameter 5mm Diameter Blocking Range Color Stock No. Stock No. Stock No. 488 3. > 35-483nm & 493-65nm #68-84 #68-872 #68-94 514 3. > 4-59nm & 52-7nm #68-842 #68-874 #68-96 532 3. > 4-527nm & 537-7nm #68-843 #68-875 #68-97 632 3. > 5-627nm & 639-9nm #68-847 #68-879 #68-911 785 3. > 65-777nm & 793-11nm #68-852 #68-884 #68-916 8 3. > 65 - nm & 816-11nm #68-854 #68-886 #68-918 83 3. > 7-821nm & 839-12nm #68-855 #68-887 #68-919 9 4. > 85-97nm & 99-13nm #68-857 #68-889 #68-921 164 5. > 9-154nm & 174-14nm #68-859 #68-891 #68-923 techspec OD 6 Laser Clean-Up Filters CWL Bandwidth Color 785nm Laser Line Bandpass Filter 1 9 7 5 4 3 2 1 7 9 1 11 12 Min. 164nm Laser Line Bandpass Filter 1 9 7 5 4 3 2 1 9 1 11 12 13 14 Blocking Range 12.5mm Diameter 25mm Diameter OD 5 Range OD 6 Range Stock No. Stock No. 325 1.2 291-321 & 328-3 299-32 & 329-357 #68-926 #68-957 355 1.3 314-351 & 358-422 326-349 & 3-39 #68-927 #68-958 488 1.9 9 415-483 & 492-625 449-4 & 495-536 #68-936 #68-967 514 2. 9 434-59 & 519-669 473-56 & 522-566 #68-938 #68-969 532 2. 9 447-527 & 537-699 489-524 & 54-585 #68-939 #68-97 632 2.4 9 515-626 & 639-884 582-623 & 642-696 #68-943 #68-974 785 3. 9 612-777 & 793-1214 722-773 & 797-864 #68-947 #68-978 8 3.1 9 625-799 & 816-133 743-795 & 82-888 #68-949 #68-9 83 3.2 9 639-821 & 838-167 763-817 & 842-913 #68-95 #68-981 9 3.7 9 724-97 & 989-1332 91-965 & 994-178 #68-952 #68-983 164 4. 9 979-153 & 175-1429 979-147 & 1-117 #68-954 #68-985 COPYRIGHT 217 EDMUND OPTICS, INC. ALL RIGHTS RESERVED 1/17

High Performance EDge Filters OD >4 and OD >2 Blocking Options High Rejection / Efficiency Shortpass and Longpass Options Available TECHSPEC High Performance Edge Filters feature OD >4 or OD >2 blocking, high transmission, and steep slopes to ensure maximum efficiency. Both shortpass and longpass filters are available across the entire visible and NIR spectrum as standard products. All specifications are customizable for prototyping and high volume orders. Substrate: UV Grade Fused Silica Surface Quality: 4-2 Wavefront Distortion: l/4 RMS @ 633nm Cut-On/Cut-Off Slope (%): OD >4 Filters: <1 OD >2 Filters: <3 Pass Band : OD >4 Filters: ± 9991 OD >2 Filters: 85 1 4 2 High Performance OD >4 Shortpass Filters High Performance OD 4. Shortpass Filters 45 5 55 1 4 2 High Performance OD 4. Shortpass Filters 45 55 65 75 85 95 15 115 75 85 9 1 9 7 5 4nm 4 45nm 3 5nm 2 1 3 4 5 7 9 1 11 12 13 14 15 1 High Performance OD >4 Longpass Filters 1 9 7 55nm 5 nm 4 65nm 3 7nm 2 1 3 4 5 7 9 1 11 12 13 14 15 1 techspec OD 4 Shortpass Filters Cut-Off Band Rejection Band 12.5mm 25mm 5mm 4 3-392 41-61 #84-689 #84-72 #84-715 425 3-417 435-635 #84-69 #84-73 #84-716 45 3-441 4-6 #84-691 #84-74 #84-717 475 3-466 485-685 #84-692 #84-75 #84-718 5 3-49 512-715 #84-693 #84-76 #84-719 525 3-515 537-74 #84-694 #84-77 #84-72 55 35-539 562-825 #84-695 #84-78 #84-721 575 35-564 587-85 #84-696 #84-79 #84-722 35-587 614-9 #84-697 #84-71 #84-723 625 35-612 639-925 #84-698 #84-711 #84-724 65 35-636 665-9 #84-699 #84-712 #84-725 675 35-661 69-1 #84-7 #84-713 #84-726 7 4-685 715-15 #84-71 #84-714 #84-727 725 4-71 74-19 #86-95 #86-13 #86-111 75 4-74 775-1125 #64-324 #64-332 #84-728 775 4-7 795-1155 #86-96 #86-14 #86-112 4-79 825-119 #64-325 #64-333 #84-729 825 4-81 85-119 #86-97 #86-15 #86-113 85 4-84 8-119 #64-326 #64-334 #84-73 875 425-8 95-122 #86-98 #86-16 #86-114 9 425-89 93-125 #64-327 #64-335 #84-731 925 445-91 955-129 #86-99 #86-17 #86-115 95 45-939 9-1325 #64-328 #64-336 #84-732 975 465-9 15-1365 #86-1 #86-18 #86-116 1 465-988 135-14 #64-329 #64-337 #84-733 125 49-11 1-143 #86-11 #86-19 #86-117 15 485-136 185-14 #64-33 #64-338 #84-734 175 55-1 111-1495 #86-12 #86-11 #86-118 11 51-185 114-153 #64-331 #64-339 #84-735 *115 535-1135 119-165 #89-669 #89-573 #89-677 *12 55-1185 124-165 #89-67 #89-674 #89-678 *125 575-1235 129-165 #89-671 #89-675 #89-679 *13-1285 134-165 #89-672 #89-676 #89-6 techspec OD 4 Longpass Filters Cut-On Rejection Band Band 12.5mm 25mm 5mm 325* 2-32 333-165 #34-295 #34-296 #34-297 35* 2-345 358-165 #34-298 #34-299 #34-3 375* 2-37 383-165 #34-31 #34-32 #34-33 4 2-39 48-165 #62-974 #62-981 #84-754 425 2-415 433-165 #84-736 #84-742 #84-748 45 2-44 458-165 #62-975 #62-982 #84-755 475 2-465 483-165 #84-737 #84-743 #84-749 5 2-49 58-165 #62-976 #62-983 #84-756 525 2-515 534-165 #84-738 #84-744 #84-75 55 2-539 5-165 #62-977 #62-984 #84-757 575 2-564 585-165 #84-739 #84-745 #84-751 2-588 61-165 #62-978 #62-985 #84-758 625 2-613 635-165 #84-74 #84-746 #84-752 65 2-637 6-165 #62-979 #62-986 #84-759 675 2-662 685-165 #84-741 #84-747 #84-753 7 2-686 71-165 #62-9 #62-987 #84-7 725 2-75 735-165 #86- #86-68 #86-76 75 2-735 765-165 #66-226 #66-234 #84-761 775 2-7 79-165 #86-61 #86-69 #86-77 2-785 815-165 #66-227 #66-235 #84-762 825 2-5 84-165 #86-62 #86-7 #86-78 85 2-835 865-165 #66-228 #66-236 #84-763 875 2-8 89-165 #86-63 #86-71 #86-79 9 2-8 915-165 #66-229 #66-237 #84-764 925 2-95 94-165 #86-64 #86-72 #86-95 2-93 965-165 #66-23 #66-238 #84-765 975 2-955 99-165 #86-65 #86-73 #86-81 1 2-9 12-165 #66-231 #66-239 #84-766 125 2-15 145-165 #86-66 #86-74 #86-82 15 2-13 17-165 #66-232 #66-24 #84-767 175 2-155 195-165 #86-67 #86-75 #86-83 11 2-1 112-165 #66-233 #66-241 #84-768 115** 2-113 117-165 #89-657 #89-661 #89-665 12** 2-11 122-165 #89-658 #89-662 #89-666 125** 2-123 127-165 #89-659 #89-663 #89-667 13** 2-12 132-165 #89-6 #89-664 #89-668 * Standard Thickness of 3.mm * All sizes are 1.5mm thick ** All sizes are 3.mm thick COPYRIGHT 217 EDMUND OPTICS, INC. ALL RIGHTS RESERVED 1/17 For OD 2 Filters, visit our website at www.edmundoptics.com/filters

Dichroic Edge Filters Ideal for Fluorescence or Multispectral Imaging Sharp Cut-Off or Cut-On Wavelengths Multi-Band Options Available TECHSPEC Dichroic Edge Filters are designed for a 45 angle of incidence. The rejected light is reflected at 9, making these filters ideal for use in fluorescence applications or as spectral beamsplitters. The filters feature low polarization dependence, broad spectral ranges, and a precision fused silica substrate. Substrate: Fused Silica Band (%): T avg >85 Reflection Band (%): R avg >97 Wavefront Distortion: l/4 Slope Factor (%): 3 Sizes Available (mm): 12.5 Diameter, 12.5 x 17.6 25. Diameter, 25.2 x 35.6 To Download Curves For All TECHSPEC Filters Visit www.edmundoptics.com/filters Dichroic Shortpass Filters Dichroic Longpass Filters Fluorescence Dichroic Filters 1 9 1 9 1 9 7 5 4 3 2 1 4 Cut-Off 5 7 Band nm 65nm 7nm 75nm Reflection Band 7 5 4 3 2 1 35 Cut-On 45 55 65 75 85 95 15 15 125 135 145 155 Reflection Band Band Cut-On Reflection Band Band 4 325-385 42-485 4 35-375 42-1 49 325-44 415-85 45 325-43 47-545 45 35-43 47-1 458 415-45 467-5 325-4 52-61 5 35-4 52-1 482 35-47 49-85 55 4-53 575-725 55 415-515 575-1 495 435-488 52-73 4-5 625-795 4-57 625-1 56 44-5 513-73 65 4-63 675-85 65 495-61 675-1 51 35-488 515-85 7 4-6 725-9 7 535-6 725-1 516 35-51 52-85 75 4-725 - 99 75 565-715 7-1 52 475-512 528-73 4-775 85-15 - 7 83-1 552 35-544 558-85 85 4-82 91-111 85 635-5 8-1 562 49-554 57-75 9 465-865 9-117 9 675-855 935-1 593 52-585 - 95 495-912 997-1235 95 715-9 985-1 5 35-596 612-95 1 52-9 15-13 1 75-95 135-1 6 5-651 67-15 546-18 112-1365 15 79-1 185-1 685 59-676 695-81 11 572-156 1155-143 11 825-145 1135-1 1 45-79 814-11 115 598-114 127-1495 115 875-195 119-1 12 624-1152 12-15 12 92-11 124-1 45nm 5nm 55nm nm 7 5 4 3 2 1 4 516nm 52nm 552nm 562nm 593nm 55 65 75 COPYRIGHT 217 EDMUND OPTICS, INC. ALL RIGHTS RESERVED 1/17 Can't find the Filter you need? Call Us Today!

High Performance Fluorescence Dichroic Filters Improved Flatness, Transmitted Wavefront, and Surface Quality Ideal for Fluorescence Microscopy or High Magnification Imaging Applications Most Popular Cut-On Wavelengths of Fluorescence and Longpass Dichroic Filters Our TECHSPEC High Performance Fluorescence Dichroic Filters feature the same broad, flat transmission and reflection ranges as our popular TECHSPEC Fluorescence Dichroic Filters, but have improved physical parameters. Special attention to surface flatness, transmitted wavefront, and surface quality have resulted in our highest level of precision yet on a filter. These rectangular filters fit into most common Nikon, Zeiss, and Olympus fluorescence microscopes. High Performance Fluorescence Dichroic Filters are a perfect complement to our TECHSPEC Fluorescence Bandpass Filters. For specific wavelength or size requirements, numerous custom options are available. Substrate: UV Grade Fused Silica Dimensional Tolerance (mm): +./-.1 Thickness (mm): 1.5 ±.1 Transmitted Wavefront (RMS): l/1 Surface Flatness (P-V): l/2 Surface Quality: 4-2 Angle of Incidence: 45 Reflection Band (%): R avg >98 Band (%): T avg >9 techspec High performance Fluorescence Dichroic Filters Cut-on Reflection 12.5 x 17.6mm 25.2 x 35.6mm Band Band Stock No. Stock No. 49 325-44 415-85 #34-724 #34-725 435 325-425 444-85 #34-726 #34-727 45 35-43 457-85 #34-728 #34-729 482 35-47 49-85 #34-73 #34-731 495 435-488 52-73 #34-732 #34-733 56 44-5 513-73 #34-734 #34-735 552 35-544 558-85 #34-736 #34-737 4-57 7-9 #34-738 #34-739 5 35-596 612-95 #34-74 #34-741 6 5-651 67 - #34-742 #34-743 75 565-715 757-95 #34-744 #34-745 - 7 7-1 #34-746 #34-747 85 635-5 857-15 #34-748 #34-749 Neutral Density Filters Maximum Accuracy & Neutrality at Moderate Price Spectrally Flat Use Stacks to Create Intermediate Density Values Other ND Filters Available - Absorptive, Non Reflective, and More These Neutral Density Filters feature constant density values across the surface with varying transmission to reflection ratios based on density selection. In stacks, the total density is the sum of each filter s den si ty. ND filters are used pri ma ri ly for the attenuation of light over a wide spec tral range, but are often used in laser and pho tom e ter ap pli cations, where ex ces sive power can cause dam age or in ac cu rate results. Orient mirrored side toward source at angle of incidence. COPYRIGHT 217 EDMUND OPTICS, INC. ALL RIGHTS RESERVED 1/17 Substrate: Float Glass Dimensional Tolerance (mm): ±.5 Wavelength Range : 4-7 Parallelism (arcmin): 3 Thickness (mm): 1.5 nominal Surface Quality: -5 Neutrality: OD.2: ±2% OD >.2: ±5% of Density Coating: First Surface Inconel Clear Aperture (%): TECHSPEC reflective neutral density filters Optical Density Reflection (%) 12.5mm Diameter 25mm Diameter 5 x 5mm.1 79 1 #64-125 #64-131 #64-137.15 7 12 #64-126 #64-132 #64-138.2 63 14 #64-127 #64-133 #64-139.3 5 21 #46-131 #3-933 #43-813.4 4 25 #64-128 #64-134 #64-14.5 32 3 #46-132 #3-934 #43-814. 25 37 #49-71 #49-72 #49-73.7 2 42 #64-13 #64-136 #64-142.9 12.5 5 #49-74 #49-75 #49-76 1. 1 45 #46-133 #3-935 #43-815 1.3 5. 5 #46-134 #3-936 #46-123 1.5 3.2 55 #46-135 #3-937 #46-124 2. 1. 55 #46-136 #3-938 #43-816 2.5.3 55 #46-137 #43-811 #46-125 3..1 55 #46-138 #43-812 #46-126

Imaging Filters Optimized for Use with Popular LEDs Multiple Mounting Sizes and Threads Available to Ease System Compatibility Extremely High and Flat Profiles Provide Even Illumination TECHSPEC Imaging Filters are designed and manufactured for the most demanding machine vision and imaging applications. TECHSPEC Imaging Filters pass or block specific UV, visible, or IR wavelengths and provide wide angles of incidence. Compared to traditional filters, these hard coated filters provide superior blocking of unwanted light and greater durability for longer lifetimes. Additionally, these filters can be used to improve image contrast and isolate spectral regions and colors. Fits perfectly on Edmund Optics Imaging Lenses 1 9 7 5 4 3 2 1 UV and IR Filters NUV UV/IR Cut-Off UV/VIS Cut-Off 2 3 4 5 7 9 1 11 12 1 9 7 5 4 3 2 1 Color Imaging Filters Blue Cyan Green Orange Light Red Dark Red 2 3 4 5 7 9 1 11 12 Dimensions Filter Thread Outer Front Thread Filter Thread Clear Thickness Diameter (to allow for Diameter Length Aperture CA (mm) (mm) stacking) (mm) (mm) (mm) M22.5 x.5 24.5 M22.5 x.5 2.1 4.5 2. 18.5 M25.5 x.5 27.5 M25.5 x.5 23. 4.5 2. 21.5 M3.5 x.5 32.5 M3.5 x.5 28. 5. 2. 26.5 M34. x.5 36. M34. x.5 31.6 5. 1.5 3. M35.5 x.5 37. M35.5 x.5 33.1 5. 2. 31.5 M4.5 x.5 42. M4.5 x.5 38. 5. 2. 36.5 M43. x.75 45. M43. x.75 4.2 5. 2. 39.2 M46. x.75 48. M46. x.75 43.2 4.8 2.2 41.5 M55. x.75 57. M55. x.75 52.2 4.8 2.2 5.5 M62. x.75 65. M62. x.75 59.2 5.5 2.5 57.5 Coating Specifications TECHSPEC imaging filters Filter NUV Blue Cyan Green UV/IR Cut-Off Orange Light Red Dark Red UV/VIS Cut-Off Thread Stock No. Stock No. Stock No. Stock No. Stock No. Stock No. Stock No. Stock No. Stock No. M22.5 x.5 #89-753 #89-763 #89-773 #89-783 #89-793 #89-3 #89-813 #89-823 #89-833 M25.5 x.5 #89-754 #89-764 #89-774 #89-784 #89-794 #89-4 #89-814 #89-824 #89-834 M3.5 x.5 #89-755 #89-765 #89-775 #89-785 #89-795 #89-5 #89-815 #89-825 #89-835 M34. x.5 #89-756 #89-766 #89-776 #89-786 #89-796 #89-6 #89-816 #89-826 #89-836 M35.5 x.5 #89-757 #89-767 #89-777 #89-787 #89-797 #89-7 #89-817 #89-827 #89-837 M4.5 x.5 #89-758 #89-768 #89-778 #89-788 #89-798 #89-8 #89-818 #89-828 #89-838 M43. x.75 #89-759 #89-769 #89-779 #89-789 #89-799 #89-9 #89-819 #89-829 #89-839 M46. x.75 #89-7 #89-77 #89-7 #89-79 #89- #89-81 #89-82 #89-83 #89-84 M55. x.75 #89-761 #89-771 #89-781 #89-791 #89-1 #89-811 #89-821 #89-831 #89-841 M62. x.75 #89-762 #89-772 #89-782 #89-792 #89-2 #89-812 #89-822 #89-832 #89-842 Filter Center Wavelength Full Width Half Max Average (%) Absolute Blocking Range OD 3 OD 4 NUV 33 95 74 4-65 2-25 Blue 47 85 95 2-4 55-12 Cyan 518 95 89-1 2-45 Green 524 92 94 2-45 - 1 UV/IR Cut-Off 548 29 95 2-37 75-11 Orange 59 79 89 7-15 2-5 Light Red 634 7 93 2-55 7-15 Dark Red 6 66 94 2-55 72-112 UV/VIS Cut-Off 8 135 96 2-75 1-12 COPYRIGHT 217 EDMUND OPTICS, INC. ALL RIGHTS RESERVED 1/17

Technical Note Filter Capabilities Durable, Hard Coated, Single Substrate Filters High, Deep Blocking, Steep Slopes Custom Designs - Prototype and Production Volumes Edmund Optics provides precision filters for the most demanding applications. With ultra-durable coatings deposited on precision substrates, our filter designs challenge the most sophisticated metrology available today. Filter coatings can be designed for applications where high optical density, high transmission, and steep slope transitions are all key features. Our coating capabilities cover the entire range of filter designs including shortpass, longpass, laser line bandpass, fluorescence bandpass, dichroic, notch filters and many more. Custom filters are available for both large manufacturing needs and prototype volumes. Contact us for more information or to arrange a quote. Filter Coating Capabilities Description Dimensions (Diameter or Square) 2-1mm Substrates All Glass Types Spectral Ranges 193nm - 14μm Edge Steepness (T5% to OD >4) <.5% Spectral Edge Tolerance <1% Deviation, <.2% Special Cases Blocking >OD 7, Measured Neutral Density Tolerance OD ±5% Center Wavelength (CWL) ±1nm Bandwidth 1nm - Broadband >95%, Typical Reflection.1-99.95% Polarization (S:P) 1,:1 Laser Damage Threshold Up to 2 J/cm 2 @ 2ns Pulses Durability MIL-STD-81F, Section 57.4, MIL-C-48497A, Section 3.4.1 Parallelism 1 arcsec Surface Quality 2-1 Fluorescence Filter sets Excitation and Emission Dichroic Filter Dimensions (mm): 25. +./-.1 25.2 x 35.6 +./-.1 Thickness (mm): 3.5 ±.1 1.5 ±.1 Clear Aperture (mm): 22. 22. x 3. Transmitted Wavefront (RMS): < l/4 <1l Angle of Incidence ( ):. ±5. 45. ±1. Have You Seen Our Curves? Download Coatings Curves for ALL TECHSPEC Filters www.edmundoptics.com/filters Excitation, Emission, and Dichroic Filters and Fluorescence Imaging >93% and OD 6 Blocking for Maximum Brightness and Contrast Hard Sputtered Coatings on Single Substrate Individual Filters Also Available To View All Fluorescence Filter Sets, Visit www.edmundoptics.com/filter-sets want easy integration? Use Pre-mounted Fluorescence Filter Cubes For Olympus & Nikon Microscopes www.edmundoptics.com/filter-cubes COPYRIGHT 217 EDMUND OPTICS, INC. ALL RIGHTS RESERVED 1/17 Contact us for a Stock or Custom Quote Today! USA: +1-856-547-3488 EUROPE: +44 () 194 78 ASIA: +65 6273 6644 JAPAN: +81-3-3944-621 www.edmundoptics.com/filters