Advantages of the 70S2 Series SECTION Since acquiring this line of miniature SSRs from Grayhill, this product has continuously evolved both functionally and visually. The 70S2 Series relays are designed for medium-power loads. The design incorporates a triac output for AC loads and MOSFETs for DC loads. The 70S2 Series relays use optical isolation to protect the control from transients. The 70S2 compact package is available in a combination of screw, fast-on or PCB terminals. Its compact size makes it ideal for designs where space is limited. The 70S2 Series relays have excellent thermal performance. Small Packages Ideal for Tight Designs.. Eight Different Packages Wide Choice of Design Options. Optically Isolated Input Isolated from Output. Switching Reduced Current Surges for Most Loads. Internal Snubber Excellent Transient Protection. - Switch up to 2 Amps - Screw Terminals - Panel Mount - Switch up to Amps - Integrated Thermal Management - PCB Mount 70S2 ( Amp) 70S2 S 70S2 ( Amp) INPUT POWER SUPPLY + LOAD - Switch up to 12 Amps - Blade Terminals - Panel Mount - - SSR INPUT OUTPUT AC INPUT + + WIRING DIAGRAM 70S2 N /28
- Switch up to Amps - Solder Terminals - PCB Mount We re very pleased at the breadth of products and solutions we are able to offer engineers and designers. And this is just the beginning. We will continue to develop high value products - with innovative features not offered anywhere else in the industry. 70S2 F - Switch up to 10 Amps - Solder Terminals - PCB/Panel Mount 70S2 M SECTION - Switch up to 2. Amps - Solder Terminals - PCB Mount 70S2 H - Switch up to Amps - Solder Terminals - PCB/Panel Mount 70S2 L - Switch up to Amps - Socket Compatible 70S2 K www.magnecraft.com 87-1-20 /29
70S2 Series Solid State Relays/, Amp, Style Integrated Thermal Management Input Terminals UL Recognized File No. E28297 Printed Circuit Board Mounting Output Terminals SECTION General Specifications (@ 2 C) Output Characteristics Number and type of Contacts Switching Device Current Rating Switching voltage Switching Type Maximum Rate of Rise Off State oltage (dv/dt) Min. Load current to maintain on Non-Repetitive Surge Current (1 cycle) Max. Off state leakage current (rms) Typical On State oltage Drop (rms) Minimum Peak Blocking oltage (UL 08) Units A /us A 70S2-0-D / 8.0 AC / 0 0 / / 10 1. AC 200 AC 70S2-0-D 8.0 AC 0 1. AC 200 AC 70S2-0-B / 2.10 AC / 0 0 / / 10 1. AC 00 AC Input Characteristics oltage Range Must Release oltage Typical Input Current @ DC or 20AC Max. Reverse Control oltage.2 DC 1.19 DC.2 DC 1. DC.2 DC 1.19 DC Performance Characteristics Operating time (response time) Dielectric strength On Off Terminals to Chassis Input to Output ms ms 000 AC 000 AC 000 AC 000 AC 000 AC 000 AC Environment Product certifications Ambient air temperature around the device Standard version Storage Operation C C -0 +12-0 +100-0 +12-0 +100-0 +12-0 +100 Miscellaneous Characteristics Thermal Resistance (Junction to Case) Weight C/W g (oz) 2 (0.9) 2 (0.9) 2 (0.9) /0
www.magnecraft.com 87-1-20 70S2 ( Amp) 70S2 ( Amp) NEW NEW NEW NEW NEW 70S2-0-B 2.10 AC 0 1. AC 00 AC 70S2-0-C / 2.280 AC / 0 0 / / 10 1. AC 00 AC 70S2-0-C 2.280 AC 0 1. AC 00 AC 70S2-01-A MOSFET.0 DC N/A 100 (1 SEC) 10 µ A 1.2 DC 10 DC 70S2-02-A MOSFET.0 DC N/A 100 (1 SEC) 10 µ A 1.2 DC 10 DC SECTION.2 DC 1. DC.2 DC 1.19 DC.2 DC 1. DC.1 DC.0 DC 9.0 DC.17 DC 000 AC 000 AC 000 AC 000 AC 000 AC 000 AC µs 00 µs 000 AC 000 AC µs 00 µs 000 AC 000 AC -0 +12-0 +100-0 +12-0 +100-0 +12-0 +100-0 +12-0 +100-0 +12-0 +100 2 (0.9) 2 (0.9) 2 (0.9) 2 (0.9) 2 (0.9) /1
70S2 Series Solid State Relays/, Amp, Style continued Integrated Thermal Management Input Terminals UL Recognized File No. E28297 Printed Circuit Board Mounting Output Terminals SECTION 0. (10.2) 1.7 (.2) 0.2 (.7) 1 (2.) 0. (10.2) 0.0 DIA. (1) IN 0.9 (22.9) OUT 0. (10.2) 0. (7.) 1.1 (27.9) 0.1 (2.) /2
www.magnecraft.com 87-1-20 70S2 ( Amp) 70S2 ( Amp) NEW NEW NEW NEW NEW Standard Part Numbers BOLD-FACED PART NUMBERS ARE NORMALLY STOCKED DC Operated Input oltage Range Output oltage Range Contact Configuration Switching Type Rated Current Load (Amps) 70S2-0-D-0-70S2-0-D-0-70S2-0-D-0-70S2-0-B-0-70S2-0-B-0-70S2-0-B-0-70S2-0-C-0-70S2-0-C-0-70S2-0-C-0-70S2-01-A-0-70S2-02-A-0-.2 DC.2 DC.2 DC.2 DC.2 DC.2 DC.2 DC.2 DC.2 DC.1 DC 9.0 DC 8.0 AC 8.0 AC 8.0 AC 2.10 AC 2.10 AC 2.10 AC 2.280 AC 2.280 AC 2.280 AC.0 DC.0 DC SECTION Part Number Builder Series Input oltage Output oltage Output Current Package Style 70S2 01 = to 1 DC, DC/DC RELAYS 02 = 9 to 0 DC, DC/DC RELAYS 0 = to 0 DC, 2 A S PACK 0 = to 0 DC (OR 2 DC), DC/AC RELAYS 0 = to 0 DC (OR 2 DC), DC/AC RELAYS A = to 0 DC B = 2 to 10 AC C = 2 to 280 AC D = 8 to 0 AC 02 = 2. AMPS 0 = AMPS 0 = AMPS 0 = AMPS 0 = AMPS 10 = 10 AMPS 12 = 12 AMPS 2 = 2 AMPS = STYLE N = N STYLE S = S STYLE F = F STYLE M = M STYLE H = H STYLE L = L STYLE K = K STYLE Maximum Continuous Current vs. Ambient Temperature /
70S2 Series Solid State Relays/N and S Style Input Terminals Output Terminals UL Recognized File No. E28297 Panel Mounting SECTION General Specifications (@ 2 C) Output Characteristics Number and type of Contacts Switching Device Current Rating Switching voltage Switching Type Maximum Rate of Rise Off State oltage (dv/dt) Min. Load current to maintain on Non-Repetitive Surge Current (1 cycle) Max. Off state leakage current (rms) Typical On State oltage Drop (rms) Minimum Peak Blocking oltage (UL 08) Units A /us A 70S2-0-B / 12 2.10 AC / 100 0 / 10 1. AC 00 AC 70S2-0-B / 12 2.10 AC / 100 0 / 10 1. AC 00 AC 70S2-0-C / 12 2.280 AC / 100 0 / 10 1. AC 00 AC Input Characteristics oltage Range Must Release oltage Typical Input Current @ DC or 20AC Max. Reverse Control oltage.0 DC 7.1 DC.0 DC.10 DC.0 DC 7.1 DC Performance Characteristics Operating time (response time) Dielectric strength On Off Terminals to Chassis Input to Output ms ms Environment Product certifications Ambient air temperature around the device Standard version Storage Operation C C -0 +12-0 +100-0 +12-0 +100-0 +12-0 +100 Miscellaneous Characteristics Thermal Resistance (Junction to Case) Weight Mounting Screw Torque C/W g (oz) Nm 7 (1.7) 7 (1.7) 7 (1.7) Maximum Continuous Current vs. Ambient Temperature 2 20 1 10 STYLE S, 2A STYLE N & S, 12A STYLE N & S, A /
www.magnecraft.com 87-1-20 70S2 N 70S2 S 70S2-0-C / 12 2.280 AC / 100 0 / 10 1. AC 00 AC 70S2-0-B 2 2.10 AC 100 1.7 AC 00 AC 70S2-0-C 2 2.280 AC 100 1.7 AC 00 AC 70S2-01-A MOSFET.0 DC N/A 100 7 (1 SEC) 10 µ A 1.8 DC 10 DC 70S2-02-A MOSFET.0 DC N/A 100 7 (1 SEC) 10 µ A 1.8 DC 10 DC SECTION.0 DC.10 DC.0 DC 7.1 DC.0 DC.10 DC.1 DC.0 DC 9.0 DC.17 DC µs 0 µs µs 0 µs -0 +12-0 +100-0 +12-0 +100-0 +12-0 +100-0 +12-0 +100-0 +12-0 +100 7 (1.7) 7 (1.7) 7 (1.7) 7 (1.7) (1.2) /
70S2 Series Solid State Relays/N and S Style continued Input Terminals Output Terminals Panel Mounting 1 (2.2) -0 DC + 20 AC A 0.9 (22.9) 0.9 (22.9) SECTION 70S2 S 0. (1.) 0.2 (.) (12.7) 0.2 (.) 0.2 (.) 0.8 (19.1) OUTPUT INPUT 1.2 1.9 (1.2) (7.) 2.2 (.9) 0.9 (22.9) OUTPUT INPUT 1.2 MAX (1.2) 1.9 (7.) 2.2 (.9) 0. (10.2) 0.187 (.) 0. (10.2) 0.02 () TERMINALS 0.02 (0.8) TERMINALS 70S2 N 1 MAX (2.2) 0.9 MAX (22.9) - -0 DC + 20 AC A /
www.magnecraft.com 87-1-20 70S2 N 70S2 S Standard Part Numbers DC Operated Input oltage Range.0 DC.0 DC.0 DC.0 DC.0 DC.0 DC.0 DC.0 DC.1 DC Output oltage Range 2.10 AC 2.10 AC 2.10 AC 2.10 AC 2.280 AC 2.280 AC 2.280 AC 2.280 AC.0 DC BOLD-FACED PART NUMBERS ARE NORMALLY STOCKED Contact Configuration Switching Type Rated Current Load (Amps) 12 12 12 12 70S2-0-B-0-N 70S2-0-B-0-N 70S2-0-B-12-N 70S2-0-B-12-N 70S2-0-C-0-N 70S2-0-C-0-N 70S2-0-C-12-N 70S2-0-C-12-N 70S2-01-A-0-N SECTION 70S2-0-B-0-S 70S2-0-B-0-S 70S2-0-B-12-S 70S2-0-B-12-S 70S2-0-B-2-S 70S2-0-C-0-S 70S2-0-C-0-S 70S2-0-C-12-S 70S2-0-C-12-S 70S2-0-C-2-S 70S2-01-A-0-S 70S2-02-A-0-S.0 DC.0 DC.0 DC.0 DC.0 DC.0 DC.0 DC.0 DC.0 DC.0 DC.1 DC 9.0 DC 2.10 AC 2.10 AC 2.10 AC 2.10 AC 2.10 AC 2.280 AC 2.280 AC 2.280 AC 2.280 AC 2.280 AC.0 DC.0 DC 12 12 2 12 12 2 Part Number Builder Series Input oltage Output oltage Output Current Package Style 70S2 01 = to 1 DC, DC/DC RELAYS 02 = 9 to 0 DC, DC/DC RELAYS 0 = to 0 DC, 2 A S PACK 0 = to 0 DC (OR 2 DC), DC/AC RELAYS 0 = to 0 DC (OR 2 DC), DC/AC RELAYS A = to 0 DC B = 2 to 10 AC C = 2 to 280 AC D = 8 to 0 AC 02 = 2. AMPS 0 = AMPS 0 = AMPS 0 = AMPS 0 = AMPS 10 = 10 AMPS 12 = 12 AMPS 2 = 2 AMPS = STYLE N = N STYLE S = S STYLE F = F STYLE M = M STYLE H = H STYLE L = L STYLE K = K STYLE /7
70S2 Series Solid State Relays/F and M Style Input Terminals Output Terminals UL Recognized File No. E28297 Panel Mounting SECTION General Specifications (@ 2 C) Output Characteristics Number and type of Contacts Switching Device Current Rating Switching voltage Switching Type Maximum Rate of Rise Off State oltage (dv/dt) Min. Load current to maintain on Non-Repetitive Surge Current (1 cycle) Max. Off state leakage current (rms) Typical On State oltage Drop (rms) Minimum Peak Blocking oltage (UL 08) Units A /us A 70S2-0-B 10 2.10 AC 100 0 110 1. AC 00 AC 70S2-0-B 10 2.10 AC 100 0 110 1. AC 00 AC Input Characteristics oltage Range Must Release oltage Typical Input Current @ DC or 20AC Max. Reverse Control oltage.0 DC 7.1 DC.0 DC.10 DC Performance Characteristics Operating time (response time) Dielectric strength On Off Terminals to Chassis Input to Output ms ms Environment Product certifications Ambient air temperature around the device Standard version Storage Operation C C -0 +12-0 +100-0 +12-0 +100 Miscellaneous Characteristics Thermal Resistance (Junction to Case) Weight Mounting Screw Torque C/W g (oz) Nm (1.2) (1.2) Maximum Continuous Current vs. Ambient Temperature Style F, Amp 7 Style F, Amp 2 1 2 1 /8
www.magnecraft.com 87-1-20 70S2 F 70S2 M 70S2-0-C 10 2.280 AC 100 0 110 1. AC 00 AC 70S2-0-C 10 2.280 AC 100 0 110 1. AC 00 AC 70S2-01-A MOSFET.0 DC N/A 100 N/A 10 µ A 1.2 DC 10 DC 70S2-02-A MOSFET.0 DC N/A 100 N/A 10 µ A 1.2 DC 10 DC SECTION.0 DC 7.1 DC.0 DC.10 DC.1 DC.0 DC 9.0 DC.17 DC µs 00 µs µs 00 µs -0 +12-0 +100-0 +12-0 +100-0 +12-0 +100-0 +12-0 +100 (1.2) (1.2) (1.2) (1.2) 8 7 2 1 Style M, Amp CURRENT IN AMPS 1 12 10 8 2 Style M, 10 Amp 0º 10º 20º 0º 0º 0º 0º 70º 80º 90º AMBIENT TEMPERATURE (ºC) /9
70S2 Series Solid State Relays/F and M Style continued Input Terminals Output Terminals Panel Mounting 1.2 (1.7) 1 (2.2) 0.2 (.7) 0.8 (20.7) SECTION 0. (7.) 0. (7.) 0. (10.2) 0.2 (.) 1.9 (7.) 0.0 (0.7) PLACES POTTING MIGRATION ON LEADS NOT TO EXCEED 0.02" 70S2 F 0. (7.) 1.2 (1.2) 0. (10.2) (11.) 0. (7.) (11.) INPUT OUTPUT 1.2 MAX (1.2) 2.2 (.9) 0.2 (.1) 0. (1.2) 0.2 (.1) 0. (1.2) 70S2 M 1 (2.2) 0.9 MAX (22.9) 0. (.) 0.0 (0.7) PLACES /0
www.magnecraft.com 87-1-20 70S2 F 70S2 M Standard Part Numbers DC Operated 70S2-0-B-0-F 70S2-0-B-0-F 70S2-0-C-0-F 70S2-0-C-0-F 70S2-01-A-0-F 70S2-02-A-0-F 70S2-0-B-0-M 70S2-0-B-0-M 70S2-0-B-10-M 70S2-0-B-10-M 70S2-0-C-0-M 70S2-0-C-0-M 70S2-0-C-10-M 70S2-0-C-10-M Input oltage Range.0 DC.0 DC.0 DC.0 DC.1 DC 9.0 DC.0 DC.0 DC.0 DC.0 DC.0 DC.0 DC.0 DC.0 DC Output oltage Range 2.10 AC 2.10 AC 2.280 AC 2.280 AC.0 DC.0 DC 2.10 AC 2.10 AC 2.10 AC 2.10 AC 2.280 AC 2.280 AC 2.280 AC 2.280 AC BOLD-FACED PART NUMBERS ARE NORMALLY STOCKED Contact Configuration Switching Type Rated Current Load (Amps) 10 10 10 10 SECTION Part Number Builder Series Input oltage Output oltage Output Current Package Style 70S2 01 = to 1 DC, DC/DC RELAYS 02 = 9 to 0 DC, DC/DC RELAYS 0 = to 0 DC, 2 A S PACK 0 = to 0 DC (OR 2 DC), DC/AC RELAYS 0 = to 0 DC (OR 2 DC), DC/AC RELAYS A = to 0 DC B = 2 to 10 AC C = 2 to 280 AC D = 8 to 0 AC 02 = 2. AMPS 0 = AMPS 0 = AMPS 0 = AMPS 0 = AMPS 10 = 10 AMPS 12 = 12 AMPS 2 = 2 AMPS = STYLE N = N STYLE S = S STYLE F = F STYLE M = M STYLE H = H STYLE L = L STYLE K = K STYLE /1
70S2 Series Solid State Relays/H and L Style Output Terminals Input Terminals UL Recognized File No. E28297 Panel Mounting SECTION General Specifications (@ 2 C) Output Characteristics Number and type of Contacts Switching Device Current Rating Switching voltage Switching Type Maximum Rate of Rise Off State oltage (dv/dt) Min. Load current to maintain on Non-Repetitive Surge Current (1 cycle) Max. Off state leakage current (rms) Typical On State oltage Drop (rms) Minimum Peak Blocking oltage (UL 08) Units A /us A 70S2-0-D 2. 8.0 AC 0 1. AC 200 AC 70S2-0-D 2. 8.0 AC 0 1. AC 200 AC Input Characteristics oltage Range Must Release oltage Typical Input Current @ DC or 20AC Max. Reverse Control oltage.0 DC 1.17 DC.0 DC 1. DC Performance Characteristics Operating time (response time) Dielectric strength On Off Terminals to Chassis Input to Output ms ms Environment Product certifications Ambient air temperature around the device Standard version Storage Operation C C -0 +12-0 +100-0 +12-0 +100 Miscellaneous Characteristics Thermal Resistance (Junction to Case) Weight Mounting Screw Torque C/W g (oz) Nm. 22 (0.8). 22 (0.8) Maximum Continuous Current vs. Ambient Temperature 8 7 2 1 STYLE L, A STYLE H, 2.A /2
www.magnecraft.com 87-1-20 70S2 H 70S2 L 70S2-0-B 2. 2.10 AC 0 1. AC 00 AC 70S2-0-B 2. 2.10 AC 0 1. AC 00 AC 70S2-0-C 2. 2.280 AC 0 1. AC 00 AC 70S2-0-C 2. 2.280 AC 0 1. AC 00 AC SECTION.0 DC 1.17 DC.0 DC 1. DC.0 DC 1.17 DC.0 DC 1. DC -0 +12-0 +100-0 +12-0 +100-0 +12-0 +100-0 +12-0 +100. 22 (0.8). 22 (0.8). 22 (0.8). 22 (0.8) /
70S2 Series Solid State Relays/H and L Style continued Output Terminals Input Terminals Panel Mounting 1 (2.2) (1.) SECTION 0.0 (0.7) 0.2 (.7) MIN 0. (7.) 1.2 (1.2) 0. (10.2) 0. (7.) 70S2 H 0. (7.) 0. (10.2) 0.2 (.) 0.2 (.1) 0. (1.2) (11.) 0. (7.) (+) (11.) INPUT OUTPUT 1.2 MAX (1.2) 1.9 (7.) 2.2 (.9) 70S2 L 0.2 (.1) 1 (2.2) 0. (1.2) 0.2 MIN. (.7) MAX (1.) / 0.0 (0.7) SQUARE PINS
www.magnecraft.com 87-1-20 70S2 H 70S2 L Standard Part Numbers BOLD-FACED PART NUMBERS ARE NORMALLY STOCKED DC Operated Input oltage Range Output oltage Range Contact Configuration Switching Type Rated Current Load (Amps) 70S2-0-D-02-H 70S2-0-D-02-H 70S2-0-B-02-H 70S2-0-B-02-H 70S2-0-C-02-H 70S2-0-C-02-H.0 DC.0 DC.0 DC.0 DC.0 DC.0 DC 8.0 AC 8.0 AC 2.10 AC 2.10 AC 2.280 AC 2.280 AC 2. 2. 2. 2. 2. 2. SECTION 70S2-0-B-0-L 70S2-0-B-0-L 70S2-0-C-0-L 70S2-0-C-0-L.0 DC.0 DC.0 DC.0 DC 2.10 AC 2.10 AC 2.280 AC 2.280 AC Part Number Builder Series Input oltage Output oltage Output Current Package Style 70S2 01 = to 1 DC, DC/DC RELAYS 02 = 9 to 0 DC, DC/DC RELAYS 0 = to 0 DC, 2 A S PACK 0 = to 0 DC (OR 2 DC), DC/AC RELAYS 0 = to 0 DC (OR 2 DC), DC/AC RELAYS A = to 0 DC B = 2 to 10 AC C = 2 to 280 AC D = 8 to 0 AC 02 = 2. AMPS 0 = AMPS 0 = AMPS 0 = AMPS 0 = AMPS 10 = 10 AMPS 12 = 12 AMPS 2 = 2 AMPS = STYLE N = N STYLE S = S STYLE F = F STYLE M = M STYLE H = H STYLE L = L STYLE K = K STYLE /
70S2 Series Solid State Relays/K Style Input Terminals Socket Compatible UL Recognized File No. E28297 Output Terminals SECTION General Specifications (@ 2 C) Output Characteristics Number and type of Contacts Switching Device Current Rating Switching voltage Switching Type Maximum Rate of Rise Off State oltage (dv/dt) Min. Load current to maintain on Non-Repetitive Surge Current (1 cycle) Max. Off state leakage current (rms) Typical On State oltage Drop (rms) Minimum Peak Blocking oltage (UL 08) Units A /us A 70S2-0-B 2.10 AC 0 1. 00 AC 70S2-0-C 2.280 AC 0 1. 00 AC Input Characteristics oltage Range Must Release oltage Typical Input Current @ DC or 20AC Max. Reverse Control oltage.0 DC 1.17 DC.0 DC 1. DC Performance Characteristics Operating time (response time) Dielectric strength On Off Terminals to Chassis Input to Output ms ms Environment Product certifications Ambient air temperature around the device Standard version Storage Operation C C -0 +12-0 +100-0 +12-0 +100 Miscellaneous Characteristics Thermal Resistance (Junction to Case) Weight C/W g (oz) 1. 0 (1.) 1. 0 (1.) Maximum Continuous Current vs. Ambient Temperature 8 7 2 1 Style K, Amp /
www.magnecraft.com 87-1-20 70S2 K Relay with the 70-9-1 Socket 70S2 K 70S2-0-D 8.0 AC 0 1. 200 AC 70S2-0-B 2.10 AC 0 1. 00 AC 70S2-0-C 2.280 AC 0 1. 00 AC 70S2-0-D 8.0 AC 0 1. 200 AC 70S2-01-A MOSFET.0 DC N/A 100 7 (1 SEC) 10 µ A 1.2 10 DC 70S2-02-A MOSFET.0 DC N/A 100 7 (1 SEC) 10 µ A 1.2 10 DC SECTION.0 DC 1.17 DC.0 DC 1. DC.0 DC 1.17 DC.0 DC 1. DC.1.0 DC 9.0.17 DC µs 00 µs µs 00 µs -0 +12-0 +100-0 +12-0 +100-0 +12-0 +100-0 +12-0 +100-0 +12-0 +100-0 +12-0 +100 1. 0 (1.) 1. 0 (1.) 1. 0 (1.) 1. 0 (1.) 1. 0 (1.) 1. 0 (1.) /7
70S2 Series Solid State Relays/K Style continued Input Terminals Socket Compatible Output Terminals SECTION 1. MAX (2.2) 1.2 MAX (1.2) 0.9 MAX (22.9) 0DC A - + 9-0 - DC 0.187 (.) PLACES 0. MIN. (7.1) 0.02 () PLACES 0.1 (2.1) OUTPUT INPUT 0. (1.) 0.2 (.9) 0. (7.2) 0.2 (.) 0. (7.1) /8
www.magnecraft.com 87-1-20 70S2 K Relay with the 70-9-1 Socket 70S2 K Standard Part Numbers DC Operated 70S2-0-B-0-K 70S2-0-C-0-K 70S2-0-D-0-K 70S2-0-B-0-K 70S2-0-C-0-K 70S2-0-D-0-K 70S2-01-A-0-K 70S2-02-A-0-K Input oltage Range.0 DC.0 DC.0 DC.0 DC.0 DC.0 DC.1 DC 9.0 DC Output oltage Range 2.10 AC 2.280 AC 8.0 AC 2.10 AC 2.280 AC 8.0 AC.0 DC.0 DC BOLD-FACED PART NUMBERS ARE NORMALLY STOCKED Contact Configuration Switching Type Rated Current Load (Amps) SECTION Part Number Builder Series Input oltage Output oltage Output Current Package Style 70S2 01 = to 1 DC, DC/DC RELAYS 02 = 9 to 0 DC, DC/DC RELAYS 0 = to 0 DC, 2 A S PACK 0 = to 0 DC (OR 2 DC), DC/AC RELAYS 0 = to 0 DC (OR 2 DC), DC/AC RELAYS A = to 0 DC B = 2 to 10 AC C = 2 to 280 AC D = 8 to 0 AC 02 = 2. AMPS 0 = AMPS 0 = AMPS 0 = AMPS 0 = AMPS 10 = 10 AMPS 12 = 12 AMPS 2 = 2 AMPS = STYLE N = N STYLE S = S STYLE F = F STYLE M = M STYLE H = H STYLE L = L STYLE K = K STYLE /9