6xT, F6xT, B6xT Dual Common Cathode Ultrafast Plastic Rectifier TO-220AB ITO-220AB FEATURES Power pack Glass passivated pellet chip junction Ultrafast recovery time Low switching losses, high efficiency 6xT PIN PIN 3 CASE 2 3 2 3 F6xT TO-263AB PIN PIN 3 High forward surge capability Meets MSL level, per J-STD-020, LF maximum peak of 245 C (for TO-263AB package) Solder dip 275 C max. 0 s, per JESD 22-B06 (for TO-220AB and ITO-220AB package) AEC-Q0 qualified (for ITO-220AB and TO-263AB package) 2 Material categorization: for definitions of compliance please see www.vishay.com/doc?9992 B6xT PIN HEATSIN TYPICAL APPLICATIONS For use in high frequency rectifier of switching mode power supplies, inverters, freewheeling diodes, DC/DC converters, and other power switching application. PRIMARY CHARACTERISTICS I F(AV) 2 x 8.0 A V RRM 50 V to 600 V I FSM 200 A, 25 A t rr 35 ns, 50 ns V F 0.95 V,.30 V,.50 V T J max. 50 C Package Diode variations TO-220AB, ITO-220AB, TO-263AB Common cathode MECHANICAL DATA Case: TO-220AB, ITO-220AB, TO-263AB Molding compound meets UL 94 V-0 flammability rating Base P/N-E3 - RoHS-compliant, commercial grade Base P/NHE3 - RoHS-compliant, AEC-Q0 qualified Terminals: matte tin plated leads, solderable per J-STD-002 and JESD 22-B02 E3 suffix meets JESD 20 class A whisker test, HE3 suffix meets JESD 20 class 2 whisker test Polarity: as marked Mounting Torque: 0 in-lbs max. MAXIMUM RATINGS (T C = 25 C unless otherwise noted) PARAMETER SYMBOL 6AT 6BT 6CT 6DT 6FT 6GT 6HT 6JT UNIT Maximum repetitive peak reverse voltage V RRM 50 00 50 200 300 400 500 600 V Maximum RMS voltage V RMS 35 70 05 40 20 280 350 420 V Maximum DC blocking voltage V DC 50 00 50 200 300 400 500 600 V Maximum average forward rectified current at T C = 00 C Peak forward surge current 8.3 ms single half sine-wave superimposed on rated load per diode Operating storage and temperature range Isolation voltage (ITO-220AB only) from terminal to heatsink t = min I F(AV) 6 A I FSM 200 25 A T J, T STG -55 to +50 C V AC 500 V Revision: 5-Nov-7 Document Number: 88596 ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?9000
6xT, F6xT, B6xT ELECTRICAL CHARACTERISTICS (T C = 25 C unless otherwise noted) PARAMETER TEST CONDITIONS SYMBOL Maximum instantaneous forward voltage per diode Maximum DC reverse current per diode at rated DC blocking voltage Maximum reverse recovery time per diode Typical junction capacitance per diode Note () Pulse test: 300 μs pulse width, % duty cycle 6AT 6BT 6CT 6DT 6FT 6GT 6HT 6JT 8.0 A V F () 0.95.30.50 V I F = 0.5 A, I R =.0 A, I rr = 0.25 A T C = 25 C 0 I R T C = 00 C 500 UNIT t rr 35 50 ns 4.0 V, MHz C J 85 60 pf μa THERMAL CHARACTERISTICS (T C = 25 C unless otherwise noted) PARAMETER SYMBOL F B UNIT Typical thermal resistance from junction to case per diode R JC 2.2 3. 2.2 C/W ORDERING INFORMATION (Example) PACAGE PREFERRED P/N UNIT WEIGHT (g) PACAGE CODE BASE QUANTITY DELIVERY MODE TO-220AB 6JT-E3/45.85 45 50/tube Tube ITO-220AB F6JT-E3/45.97 45 50/tube Tube TO-263AB B6JT-E3/45.35 45 50/tube Tube TO-263AB B6JT-E3/8.35 8 800/reel Tape and reel ITO-220AB F6JTHE3/45 ().97 45 50/tube Tube TO-263AB B6JTHE3/45 ().35 45 50/tube Tube TO-263AB B6JTHE3/8 ().35 8 800/reel Tape and reel Note () AEC-Q0 qualified, available in ITO-220AB and TO-263AB package Revision: 5-Nov-7 2 Document Number: 88596 ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?9000
6xT, F6xT, B6xT RATINGS AND CHARACTERISTICS CURVES (T A = 25 C unless otherwise noted) Average Forward Current (A) 20 6 2 8 4 Resistive or Inductive Load Instantaneous Reverse Leakage Current (μa) 00 0 0. 50 V to 400 V T J = 00 C 0 0 50 00 50 Case Temperature ( C) 0.0 0 20 40 60 80 00 Percent of Rated Peak Reverse Voltage (%) Fig. - Forward Current Derating Curve Fig. 4 - Typical Reverse Characteristics Per Diode Peak Forward Surge Current (A) 300 250 200 50 00 50 T C = 00 C 8.3 ms Single Half Sine-Wave Junction Capacitance (pf) 000 00 50 V to 400 V f =.0 MHz V sig = 50 mv p-p 0 0 00 Number of Cycles at 60 Hz 0 0. 0 00 Reverse Voltage (V) Fig. 2 - Maximum Non-Repetitive Peak Forward Surge Current Per Diode Fig. 5 - Typical Junction Capacitance Per Diode 00 Instantaneous Forward Current (A) 0 0. 0.2 0.4 0.6 0.8.0.2.4.6.8 2.0 Instantaneous Forward Voltage (V) Pulse Width = 300 μs % Duty Cycle 50 V to 200 V 300 V to 400 V Fig. 3 - Typical Instantaneous Forward Characteristics Per Diode Revision: 5-Nov-7 3 Document Number: 88596 ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?9000
6xT, F6xT, B6xT PACAGE OUTLINE DIMENSIONS in inches (millimeters) 0.60 (4.06) 0.40 (3.56) 0.057 (.45) 0.05 (2.67) 0.095 (2.4) 0.45 (0.54) max. 0.370 (9.40) 0.360 (9.4) PIN 2 3 0.54 (3.9) 0.48 (3.74) 0.3 (2.87) 0.03 (2.62) 0.635 (6.3) 0.625 (5.87) 0.035 (0.90) 0.028 (0.70) 0.04 (2.65) 0.096 (2.45) 0.205 (5.20) 0.95 (4.95) TO-220AB 0.45 (3.68) 0.35 (3.43) 0.350 (8.89) 0.330 (8.38).48 (29.6).8 (28.40) 0.560 (4.22) 0.530 (3.46) 0.022 (0.56) 0.04 (0.36) 0.85 (4.70) 0.75 (4.44) 0.055 (.39) 0.603 (5.32) 0.573 (4.55) 0.00 (2.54) 45 REF. 0.600 (5.24) 0.580 (4.73) 0.560 (4.22) 0.530 (3.46) 0.057 (.45) 0.025 (0.64) 0.05 (0.38) 0.05 (2.67) 0.095 (2.4) 0.404 (0.26) 0.384 (9.75) PIN 2 3 0.076 (.93) REF. 0.076 (.93) REF. 0.67 (7.04) 0.65 (6.54) 0.9 (4.85) 0.7 (4.35) 0.057 (.45) 0.035 (0.89) 0.025 (0.64) 0.205 (5.2) 0.95 (4.95) ITO-220AB 0.40 (3.56) DIA. 0.25 (3.7) DIA. 0.350 (8.89) 0.330 (8.38) 0.90 (4.83) 0.70 (4.32) 0.00 (2.54) 0.00 (2.54) 0.028 (0.7) 0.020 (0.5) 0.35 (3.43) DIA. 0.22 (3.08) DIA. 0.360 (9.4) 0.320 (8.3) 0.037 (0.940) 0.027 (0.686) 0.05 (2.67) 0.095 (2.4) 0.4 (0.45) 0.380 (9.65) 0.245 (6.22) MIN. 2 D 2 PA (TO-263AB) 0.90 (4.83) 0.60 (4.06) 0.624 (5.85) 0.59 (5.00) 0.205 (5.20) 0.95 (4.95) 0.055 (.40) 0.055 (.40) 0.047 (.9) 0 to 0.0 (0 to 0.254) 0.090 (2.29) 0.02 (0.53) 0.04 (0.36) 0.40 (3.56) Mounting Pad Layout 0.670 (7.02) 0.59 (5.00) 0.08 (2.032) MIN. 0.05 (2.67) 0.095 (2.4) 0.42 (0.66) min. 0.33 (8.38) min. 0.5 (3.8) min. Revision: 5-Nov-7 4 Document Number: 88596 ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?9000
Legal Disclaimer Notice Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, Vishay ), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer s technical experts. Product specifications do not expand or otherwise modify Vishay s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. 207 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 08-Feb-7 Document Number: 9000