THIS ACTIVITY REQUIRES ADULT SUPERVISION CREATIVE GLOWING LUMINARY BAGS YOU WILL NEED: Printer / Paper / Paper Bags / Scissors Glue Stick / LED Lights DIRECTIONS UNDER ADULT SUPERVISION» PRINT & TRIM Print the attached template pages of your choice. Carefully trim around the edges with scissors or a craft knife. ASSEMBLE Arrange the artwork on top of a brown craft bag, then glue to the surface. FINISH Place an LED candle light inside the bag. Use LED lights only. Do not use real candles! Place in your room or along a walkway!
ADULT SUPERVISION IS REQUIRED FOR THIS ACTIVITY HALLOWEEN LUMINARIES
ADULT SUPERVISION IS REQUIRED FOR THIS ACTIVITY HALLOWEEN LUMINARIES
ADULT SUPERVISION IS REQUIRED FOR THIS ACTIVITY HALLOWEEN LUMINARIES
THIS ACTIVITY REQUIRES ADULT SUPERVISION CREATIVE CARVING DORY PUMPKIN YOU WILL NEED: Pumpkin Printer Paper Pen or Pencil Graphite Paper Paint Paint Brush Light Straight Pins Linocut Tool Black Marker CD PAINTING AND CARVING: THE FOLLOWING REQUIRES ADULT SUPERVISION 1. Cut graphite paper to the size of the stencil. 2. Position and pin stencil with graphite paper under it to the pumpkin. 3. Trace over the lines of the stencil with a ball point pen or pencil. 4. Remove pins, stencil and graphite paper from pumpkin. 5. Copy over graphite lines with a black marker where black is indicated. 6. Mix paint with water to create a translucent color and brush in the desired colors in appropriate areas. 7. When dry, use the linocut tool to etch out the white areas of the stencil (I.e. Whites of the eyes, PRINT TEMPLATE the highlight in the pupil and around the outer edge of the character s outline). 8. Cut a square in the back of the pumpkin large enough to fit a CD and your light source. 9. Use a CD to gut the pumpkin, using the edge of the CD to skin away the debris from inside the pumpkin. 10. Clean up any design areas that are revealed with the light, touch up black lines or colors. 11. Pumpkin is ready for display, be sure to place on a trivet or stand so the underside of the pumpkin can breath. 12. Place an LED candlelight inside your pumpkin, turn out the lights and enjoy! TIPS: NEXT PAGE NEVER use a candle inside the pumpkin or ever cut around the stem of the pumpkin. Store the gutted and cleaned pumpkin in the refrigerator when not on display. it will last for a week or more. Do not cover in plastic as it may cause mold. If mold starts to form use the CD, to remove interior mold and spray with 50/50 water and bleach. HAPPY HALLOWEEN!
CREATIVE CARVING DORY TEMPLATE
CREATIVE CARVING» BONUS TITLE TEMPLATE
THIS ACTIVITY REQUIRES ADULT SUPERVISION TREAT BAGS Take Dory & Hank trick-or-treating with you this Halloween! YOU WILL NEED: Empty cereal box, glue gun, hole punch, string. For Dory: Soft felt in dark blue. Stiff felt in medium blue, light blue, yellow, white, red, black. For Hank: Soft felt in burgundy. Stiff felt in light blue, black, white, and three variations of coral, pink or orange. *Use construction paper as an alternative to felt!
DORY TREAT BAG ADULT SUPERVISION IS REQUIRED FOR THIS ACTIVITY DIRECTIONS UNDER ADULT SUPERVISION» Step 1: Wrap a cereal box in dark blue felt, secure with a hot glue gun. Step 2: Print all the template pages, then carefully cut out each piece from felt or construction paper (x2) one set for each side. Step 3: Glue each piece of your character to the cereal box according to the template. Step 4: Punch a hole on each side of the cereal box, (through the box and felt) then pull string through the hole and tie a knot to secure.
HANK TREAT BAG ADULT SUPERVISION IS REQUIRED FOR THIS ACTIVITY DIRECTIONS UNDER ADULT SUPERVISION» Step 1: Wrap a cereal box in dark maroon felt, secure with a hot glue gun. Step 2: Print all the template pages, then carefully cut out each piece from felt or construction paper (x2) one set for each side. Step 3: Glue each piece of your character to the cereal box according to the template. Step 4: Punch a hole on each side of the cereal box, (through the box and felt) then pull string through the hole and tie a knot to secure.