Titan Series Systems - PDF Free Download

Titan Series Systems Since 1995 - Celebrating 20 Years of Professional Service Proudly made in USA for Lab Furniture by A Division of LFFH, Inc. Lab Furniture & Fume Hoods 2385 South Norton 179th Center Street Drive, Muskegon, -C MI 49441 231.798.1111 231.798.4000 fax airmastersystems.com P: 262-204-70 New Berlin, WI 53146 F: 888-358-7380 O ce 262-204-70 www.l hi.com www.labfurnitureandfumehoods.com www.labtech-midwest.com!"#$ 2015

Standards You Deserve pg 3 pg 4 pg 5 pg 6 pg 7 pg 8 pg 9 pg 10, 11 pg 12, pg 13,14 pg 15 pg 16,17 pg 18,19 pg 20, 21 pg 22, 23 pg pg 25 pg 26 pg 27 About Titan Core Systems Series Titan 12 Box Core Titan 9 Box Core Titan 6 Box Core Titan 12 & 9 Lower Core Titan 3 Lower Core Upper & Lower Section Side panels Titan 12 & 3 Box Frame & Box Frame Side Panels & Titan Hanging Rail Kit Titan Over-Counter Shared Upright Titan Shelf Kit Cantilever Table Frames Wall Rail System & Shelf Kits HD Wall Rail System & Shelf Kits Titan Mobile Cart Titan Heavy Duty Mobile Cart Titan Electrical Raceway, Hanging Rail Kits Titan Work Bench (no services) Titan Work Bench (with services) Titan Table Frame 2

Titan Series The complete versatility of the Titan system will handle a multitude of functions in the laboratory environment. From research facilities to teaching labs, there is a configuration to meet your requirements. The island core design is extremely adaptable and durable to exceed your laboratory needs. The core has slotted uprights for shelving, table frames, and cabinet options. Key Features 3 Titan Core System configurations can be readily created and easily changed as well as moved for new applications or changing space. Can be used in conjunction with suspended, mobile or floor-mounted casework. Solid durable construction Includes a fine adjust leveling foot Static capacity of 20lbs (on a double sided, four shelves, two table frame unit) SEFA tested Cantilever table frames available in depths of & Available in:,,,,,, Cabinets: mobile, hanging, or floor mounted ordered separately Counter top options available in Phenolic & Epoxy Order shelving separately. There are a variety of options. Shelf brackets are adjustable in 1 increments to allow for multiple configurations. Shelf depths vary based on necessity. Standard shelves are 12, 14, 16, and 18 deep. Shelves can be flush to the core uprights or inset 6 between core uprights. 12 inner shelves available to work in conjunction with standard exterior shelves.

Titan Box Cores T12 Core: 85 High, available from to wide. Levelers with 1 adjustment. Floor mounted. Suitable for wall or island configurations where general services are needed. T9 Core: 85 High, available from to wide. Levelers with 1 adjustment. Floor and wall mounted. Suitable for wall configuration where general services are needed. T6 Core: 85 High, available from to wide. Levelers with 1 adjustment. Floor mounted. Suitable for island configuration where general services are needed. T3 Core: 85 High, available from to wide. Levelers with 1 adjustment, Lower Removable Panels optional For wall configuration: Floor and wall mounted when used with cantilever tables, not necessary when used with base cabinets or structural cantilever table frames For island configurations: used only with base units or structural table frames Gauges Post: 14 gauge T12, T9, T3 Inserts: 18 gauge T12, T9 Horizontal supports: 14 gauge T12, T9, T3 Floor Bracket: 10 gauge T12, T9, T3 Shelves: 16 gauge T12, T9, T3 Inserts: T12 & T9, order side covers separately (see side panels section) Shelves: Ordered separately adjustable in 1 increments max load: 200 lbs per shelf (SEFA). These work with all Titan cores. (see Titan shelf kit section) Cantilever table: ordered separately adjustable in 1 increments for or counter top max load: 800lbs (SEFA). These work with all Titan cores. T12-BC-84-0N TITAN 12" CORE TITAN 12" CORE REAGENT PANEL (12") Box Core REAGENT Box Core REAGENT PANEL (12") (1 CUTOUT PER FOOT, " WD= 3 CUTOUTS) WIDTH WIDTH HEIGHT LOWER REM. PANELS OPTIONS 0= NO REM. PANELS 1= REM. PANELS - ONE SIDE 2= REM. PANELS - BOTH SIDES COUNTERTOP OPTIONS N= NO TOP E= EPOXY TOP P= PHENOLIC TOP LOWER REM. PANELS OPTIONS 0= NO REM. PANELS 1= REM. PANELS - ONE SIDE 2= REM. PANELS - BOTH SIDES HEIGHT T12-RBC-84-2E ELEC. CUTOUT REAGENT 1 ONE SIDE 2 BOTH SIDES COUNTERTOP OPTIONS N= NO TOP E= EPOXY TOP P= PHENOLIC TOP T12-RBCE2-84-0N TITAN 12" CORE Box Core WIDTH LOWER REM. PANELS OPTIONS 0= NO REM. PANELS 1= REM. PANELS - ONE SIDE 2= REM. PANELS - BOTH SIDES HEIGHT COUNTERTOP OPTIONS N= NO TOP E= EPOXY TOP P= PHENOLIC TOP Structural Cantilever table: ordered separately adjustable in 1 increments for or counter top. These work with all Titan cores. Hanging Cabinets: ordered separately and to be used with cantilever tables. 4 2016 2015

T9-BC-84-1N TITAN 9" CORE Box Core WIDTH HEIGHT LOWER REM. PANELS OPTIONS 0= NO REM. PANELS 1= REM. PANELS - ONE SIDE COUNTERTOP OPTIONS N= NO TOP E= EPOXY TOP P= PHENOLIC TOP TITAN 9" CORE REAGENT PANEL (12") REAGENT HEIGHT T9-RBC-84-0N Box Core WIDTH LOWER REM. PANELS OPTIONS 0= NO REM. PANELS 1= REM. PANELS - ONE SIDE COUNTERTOP OPTIONS N= NO TOP E= EPOXY TOP P= PHENOLIC TOP TITAN 12" CORE REAGENT T9-RBCE-84-0N Box Core Electrical REAGENT PANEL (12") (1 CUTOUT PER FOOT, " WD= 3 CUTOUTS) ELEC. CUTOUT WIDTH HEIGHT LOWER REM. PANELS OPTIONS 0= NO REM. PANELS 1= REM. PANELS - ONE SIDE 2= REM. PANELS - BOTH SIDES COUNTERTOP OPTIONS N= NO TOP E= EPOXY TOP P= PHENOLIC TOP 5 2016 2015

Lower Cores T12 Core: 3-6 -3 Available in 47 and 35 heights available from to wide Levelers with 1 adjustment. Floor mounted. Suitable for wall or island configurations where general services are needed. T9 Core: 3-6 Available in 47 and 35 heights available from to wide Levelers with 1 adjustment. Floor and wall mounted. Suitable for wall configuration where general services are needed. Gauges Post: 14 gauge T12, T9, Inserts: 18 gauge T12, T9 Horizontal supports: 14 gauge T12, T9, Floor Bracket: 10 gauge T12, T9, Inserts: T12 & T9, ordered separately lower removable Panels, side covers Cantilever table: ordered separately adjustable in 1 increments for or counter top max load: 800lbs (SEFA) T12, T9, Structural Cantilever table: ordered separately adjustable in 1 increments for or counter top T12, T9, Hanging Cabinets: ordered separately and to be used with cantilever tables. 25 and 31 heights available T12, T9, Example: SHB-25 The Titan Core T12-RLC-47-0N T12-LC-35-0N T9-LC-35-0N T12-RLC-47-2E T12-LC-35-2E T9-LC-35-1N Size: T12: Titan 12 core T9: Titan 9 core T3: Titan 3 core Style: L: Lower C: Core I: Island P: Panel R: Reagent T12-LC-35-2E Top: E Epoxy P Phenolic O Other N None Height Inches: 35 47 Panels: 0: no panels 1: panels one side 2: panels both sides 7 T9-RLC-47-0N T9-RLC-47-1N

Side Panels UPPER SECTION TSRP-U-BC Titan Side Rem. Panel BC = BOX CORE RBC = REAGENT BOX CORE Titan Side Rem. Panel UPPER SECTION 2 ELEC. CUTOUTS * TSRP-U-BC-2E2P 2 PLUMBING BC = BOX CORE 7/8" CUTOUTS * RBC = REAGENT BOX CORE UPPER SECTION TSRP-U-BC-2DG Titan Side Rem. Panel DOUBLE GANG CUTOUTS * BC = BOX CORE RBC = REAGENT BOX CORE * Elec. boxes & fixtures needed are ordered separately. Wiring and plumbing to be done on the field LOWER SECTIONS PANELS TSRP-L Titan Side Rem. Panel Lower Section Titan Side Rem. Panel UPPER SECTION ELEC. CUTOUTS * TSRP-U-BC-4E BC = BOX CORE RBC = REAGENT BOX CORE TSRP-M Titan Side Rem. Panel Middle Section (Only for reagent cores) 9

T12 Box Frame Box Frame S Service Plates T12-B--S Titan 12 Core Height Titan Box Frame T12 Box Frame Gauge: Uprights are made with 14 gauge CRS 2x3 tubing. The top support is made of Formed 14 gauge CRS. Counter top Brackets are 7 gauge CRS. Optional side panels are 18 gauge CRS Sizes: Box frames are high and 12 deep. Available from to wide in 6 increments Shelves: Load ratings 200lbs per shelf, 400lbs per side (total) Features: Allow use of vertical space above work surface when needed. Box frames are easily bolted to countertop. Shelving and wall storage used with Titan cores work with box frame uprights. Slotted uprights with 1 increments to allow height adjustment cabinets and shelves. Side panels to cover the space between uprights can be ordered separately and services can be run thru them. T9 Box Frame (wall mounted) This unit is designed for use when the casework is against the wall. This unit has the same specifications as the T12 Box Frame above except it is 9 deep. This unit is also a single sided unit. 10

Titan T3 Box Frame T3 Box Frame Gauge: Uprights are made with 14 gauge CRS 2x3 tubing. The top support is made of Formed 14 gauge CRS. Counter top Brackets are 7 gauge CRS. Optional side panels are 18 gauge CRS Sizes: Box frames are high and 3 deep. Available from to wide in 6 increments. Load Rating Shelves: 120lbs total per shelf. (0lbs maximum total per side.) Features: Allow use of vertical space above work surface when needed. Box frames are easily bolted to countertop. Shelving and wall storage used with Titan cores work with box frame uprights. Slotted uprights with 1 increments to allow height adjustment cabinets and shelves. Side panels to cover the space between uprights can be ordered separately and services can be run thru them. Shelves: Sold Separately(See Titan Shelf Kits page. Shelves are adjustable in 1 increments.) Box Frame T3-B- Titan 3 Core : 66 Height 11

Titan Over-Counter Shared Upright T12 & T3 Over-Counter Shared Upright Gauge: Uprights are made with 14 gauge CRS 2x3 tubing. The top support is made of Formed 14 gauge CRS. Counter top Brackets are 7 gauge CRS. Optional side panels are 18 gauge CRS Sizes: Box frames are high and 3 deep. Available from to wide in 6 increments. Features: Allow use of vertical space above work surface when needed. Box frames are easily bolted to countertop. Shelving used with Titan cores work with box frame uprights. Slotted uprights with 1 increments to allow height adjustment cabinets and shelves. Side panels to cover the space between uprights can be ordered separately and services can be run thru them. 94 46 46.000 44 44 Box Frame Crossmember T3-BFCM- Titan 3 Core : 66 10 12.00 6.00.000 94.000 44.000 44.000.00 14.00.00 Box Frame Single Upright T12-BFSU- Titan 12 Core Height ***Both the Single Uprights and Crossmembers must be ordered at the same time to create a complete Titan Shared Upright. Shelf kits must be ordered separately also based on sizes to fit you needs. 12

Titan Shelf Kits Style: T Titan S Shelf K Kit Top: B Bracket I Inside Bracket S Seismic Rod (includes brackets) TSK-18-12B TSK-18-12B (model as shown) Depth inches: inches: Bracket Depth Shelf Kit System: TSK-18-12B Depth-Bracket Depth: 18-12 20-14 22-16 -18 Island Core :,,,,,,,66, TSK-12-12B Depth-Bracket Depth: 12-12 14-14 16-16 18-18 Island Core :,,,,,,,66, TSK-12-12B (model as shown) TSK-12-12I (model as shown for T9 & T12 cores only ) TSK-18-12i Depth-Bracket Depth: 12-12 9-9 Island Core :,,,,,,,66, TSK-12-12SR TSK-12-12SR Seismic Rod/ (available for all shelves) Titan Shelf Kit: These will fit any Titan Core, Titan Box Frames, Titan work Benches, and Titan Mobile Carts. Bracket Types: Bookend -B Inverted (under) -U Seismic Rod -SR Ordering Tips: s: Kit widths should match the width of the core. Box frame or Bench/Cart. (Slots center to center dimension is always 2 less than kit nominal width.) Depth: STD Kits: Shelves are the same depth as brackets and set with flush mount uprights Extended shelf kits: Shelves are deeper than the brackets and extended to the back. We offer 1, 3, and 6 extended shelf kits. 13

Cantilever Table Frame Style: S Structural C Cantilever T Table F Frame Top: E Epoxy P Phenolic O Other N None SCTF-35-E Cantilever Table frames Depth inches: inches: Height Cantilever Table Frames are an essential component setting a titan configuration in your lab. The frame construction is 14 gauge steel. It has widths of to in 6 increments. The Titan also has capabilities to mount hanging cabinets. SCTF-35-N (model as shown) Cantilevered Tables (CTF) attach directly to the core, the core should be bolted to the floor. They can support hanging cabinets or mobile units under the frame. Height adjustable in one inch increments. Depth available to deep. The table will support up to 800lbs. Structural Support Table Frames (SCTF) attach directly to the core. They support the Island or Wall cores when the cores cannot be bolted to the floor. The table has a fixed height of or 35. The table will support up to 800lbs. CTF--N CTF--N (model as shown) TF-SL-N (model as shown) 15

Wall Rail Shelving Style: W Wall R Rail S System H Horizontal V Vertical R Rail D Double S Slotted WRS-VR Depth: " For Shelving Only: If wall rail cabinets or work surfaces are needed go to the section Wall Rail HD Shelving only: 1 deep, 1 wide vertical end rails 2 deer, 2 wide middle vertical rails. Wall Rail: 1 profile, Available heights:,,, & Available widths: from,,,,,,, 66, Proper blocking needed for horizontal rails. Components to order: -Horizontal channels (2) -Vertical Upright - Single Slotted (2) -Vertical Upright - Double Slotted (2) -Cover Panels Shelves: Wall shelf kit ordered separately (See page 17). Adjustable in 1 increments Standard depths: 12, 14, 16, and 18 Gauges: Horizontal channels: 14 Gauge Vertical Uprights: 14 Gauge Channel Cover Panels: 18 Gauge (example for configuration on left) Height WRS-VR (2) Wall Rail System Vertical Rail WRS-HR (2) Wall Rail System Horizontal Rail Height WRS-VRDS (2) (1) Wall Rail System Vertical Rail double slotted SHELVES SHOWN TWSK-13-12B (2) (2) TWSK-12-12B (2) (2) WRCP (2) Wall Rail Cover Panel WRCP (2) Wall Rail Cover Panel 16

Wall Rail System : Wall Rail System Vertical Rail WRS-VR Height WRS-HR Wall Rail System Horizontal Rail 66 Wall Rail System Vertical Rail WRS-VRDS Double Slotted Height Wall Rail Cover Panel WRCP 66 Standard Titan Wall Shelf Kits: 1 EXT Titan Wall Shelf Kits Top Shelves (side and front lips included 17

Wall Rail HD System Style: W Wall R Rail S System CP Cover Panel H Horizontal V Vertical R Rail WRS-VR-HD Depth: " H Heavy D Duty Wall Rail HD: Heavy Duty Rails- capability to support table frames (with optional hanging cabinets) Profile: 1 deep, 2 wide vertical rails Available heights:,,,, and 78 Available widths: from,,,,,,, 66, Proper blocking needed for horizontal rails, extra blocking required for 78 high rails. Components to order: -Horizontal channels (2) -Vertical Upright - Single Slotted (2 per section) -Cover Panels Gauges: Horizontal channels: 12 Gauge Vertical Uprights: 12 Gauge Channel Cover Panels: 18 Gauge Shelves: Standard or 1 extended shelf kits only. Adjustable in 1 increments. Standard depths: 12, 14, 16, and 18 HOW TO ORDER: BY COMPONENTS (example for configuration on left) WRS-VRA78-HD (4) Wall Rail System Vertical Rail Height WRS-HR-HD (2) Wall Rail System Horizontal Rail WRCP-HD (4) Wall Rail Cover Panel SHELVES SHOWN TSK-13-12B (4) TABLES SHOWN CTF--N (2).000 2.000 2.000 2.000 2.000 78.5 2.000 76.000 14.000 2.000 29.000 18

HD Wall Rail System : VERTICAL RAIL Wall Rail System Vertical Rail Height Heavy Duty WRS-VR-HD HORIZONTAL RAIL Wall Rail System Horizontal Rail Heavy Duty WRS-HR-HD 66 FULL HEIGHT VERTICAL RAIL Wall Rail System Vertical Rail Heavy Duty WRS-VRA78-HD Assembly Height COVER PANEL Cover Panel 66 Heavy Duty WRCP-HD Wall Rail HD Wall Shelf Kits: SHELF KITS FOR TITAN WALL RAIL HD 1" STD TITAN SHELF KITS 1" EXT. TITAN WALL SHELF KITS TSK-12-12SR Titan Shelf Kit Titan Shelf Kit Shelf Depth (Same depth as bracket) Shelf Depth (Same depth as bracket + 1 inch) 66 66 Bracket Type B = bookend u = inverted (under) SR = seismic rod (rod included) Bracket depth 12 14 16 18 TSK-13-12B Bracket Type B = bookend u = inverted (under) SR = seismic rod (rod included) Bracket depth 12 14 16 18 USE TITAN SHELF KITS WHEN USING THE TITAN WALL RAIL HD TIPS TO ORDER: WIDTH: HORIZONTAL RAIL(S) WIDTH SHOULD MATCH THE SUM OF ALL KIT WIDTHS (SEE EXAMPLE ON PRIOR PAGE) DEPTH: STD KITS: SHELVES ARE SAME DEPTH AS BRACKETS AND SET FLUSH WITH UPRIGHTS 1" EXTENDED SHELF KITS: SHELVES ARE 1" DEEPER THAN BRACKETS SHELF LIPS: LIP WIDTH IS 1" LESS THAN KIT WIDTH Maximum Load Ratings Bracket Depth: 12": 200lbs 14": 140lbs 16": 140lbs 18 : 100lbs 1" HIGH SHELF LIPS (FITS FRONT OR BACK1") SHELF LIPS: LIP WIDTH IS 2" LESS THAN KIT WIDTH FLIP34 FRONT / BACK LIP LIP WITDH 22 FOR THE " W TSK 28 FOR THE " W TSK 34 FOR THE " W TSK 40 FOR THE " W TSK 46 FOR THE " W TSK 52 FOR THE " W TSK 58 FOR THE " W TSK 64 FOR THE 66" W TSK 70 FOR THE " W TSK 19

Titan Mobile Cart: Titan Cart features: Fully welded cart base. Uprights are bolted into the base. Structural vertical support for the tables, cabinets (suspended & wall versions) and shelving. Frames can be ganged side by side or back to back. Equipped with 700 lbs locking casters. Levelers and a 750 lbs leveling caster are an option. Gauge: Uprights are made of 14 gauge Cold Rolled Steel 2x3 tubing. The lower top cart support is 14 gauge Cold Rolled Steel. The cart base is made with 2x3 and 2x2 14 gauge Cold Rolled Steel tubing. Cart gussets are made of formed 10 gauge Cold Rolled Steel. Style: T Titan M Mobile C Cart Titan Mobile Cart TMC--CL width depth Top: CL Casters & Leveling feet C Casters H 750 lb leveling caster MP Modesty Panel height Sizes: Cores come in 2 standard heights: 78 and high units. s come in,,, and. Depth is Max Weight load Breakdown: Shelves 200lbs each (0lbs max) Table Frame 800lbs Bottom Shelf 400lbs Mobile Cart maximum weight load: 1800lbs (model shown with modesty panel) (model shown with modesty panel) 20

Titan Mobile Cart Shelves & Table Frame Mobile Cantilever Table Frame: are made from 14 gauge Cold Rolled Steel 2x2 and 1x2 tubing, 12 gauge unistrut cross rails and box supports are made from 16 gauge Cold Rolled steel. Features of this table attaches directly into core uprights. The work surface height is adjustable in 1 increments. It includes unistrut rails to hang cabinets. Includes a surface leveling bolt. Sizes: Frames are 16 high an 23 - in depth on the work surface. s:,,, and Style: T Titan M Mobile C Cart Titan Mobile Cart depth Top: CL Casters & Leveling feet C Casters H 750 lb leveling caster MP Modesty Panel TMC--CL Mobile Cart Bottom shelf: Gauges: all bottom shelf components are made of 14 gauge steel. Shelf sizes: 26 deep, widths:,,, and. Features: Shelf fits perfectly on base cart assembly, no fasteners required. All shelves have a welded hat channel reinforcement. Max load 400lbs. Shelves: All Titan shelf kits will work with this unit. width height TITAN MOBILE CART - SHELVES & WORK SURFACES TABLE FRAME - " DEEP " DEEP Table Frame TMC-TF--N Titan Mobile Cart Depth N = No top, frame only E = with epoxy top P = with phenolic top COUNTERTOP DIMENSIONS 2.062 TYP 6.063 TYP.000 The depth of the table top will match depth of table frame ( or ) SAME AS CART WIDTH TITAN SHELF KITS All Titan Shelf Kits (TSK ) can be used with Titan Mobile Cart See Titan Shelf Kits for more details CART BOTTOM SHELF TSK-15-12B Botton Shelf Asm TMC-BSA- Titan Mobile Cart Depth 21

Heavy Duty Mobile Cart: Heavy Duty features: Fully welded cart base. Uprights are bolted into the base. Structural vertical support for the tables, cabinets (suspended & wall versions) and shelving. Frames can be ganged side by side or back to back. Equipped with 700 lbs locking casters. Levelers and a 750 lbs leveling caster are an option. Gauge: Uprights are made of 14 gauge Cold Rolled Steel 2x3 tubing. The lower top cart support is 14 gauge Cold Rolled Steel. The cart base is made with 2x3 and 2x2 14 gauge Cold Rolled Steel tubing. Cart gussets are made of formed 10 gauge Cold Rolled Steel. Style: H Heavy D Duty M Mobile C Cart Heavy Duty Mobile Cart HDMC--CL width depth Top: CL Casters & Leveling feet C Casters H 750 lb leveling caster MP Modesty Panel height Sizes: Cores come in 2 standard heights: 78 and high units. s come in,,, and. Depth is Max Weight load Breakdown: Shelves 0lbs each (1200lbs max) Table Frame 800lbs Bottom Shelf 0lbs Mobile Cart maximum weight load: 20lbs 22

Titan System Accessories Style: T Titan H Hanging R Rail K Kit H Horizontal V Vertical R Rail D Double S Slotted THRK- Depth: " Titan System Accessories : Titan Hanging Rail Kit: 1 profile, Available heights:,,, & Titan Raceway: -Horizontal channels (2) Gauges: Horizontal channels: 14 Gauge Vertical Uprights: 14 Gauge Channel Cover Panels: 18 Gauge Shelves: Wall shelf kit ordered separately. Adjustable in 1 increments Standard depths: 12, 14, 16, and 18 Titan Core TC-RW-6G Raceway D-Duplex G-GFI Quantity (Note: Quantities are variable based on space available)

Titan Work Bench (no services) Style: S Structural C Cantilever T Table F Frame Top: E Epoxy P Phenolic O Other N None TWB-35-E Depth inches: inches: Height Titan Work Bench (TWB) gives the maximum flexibility for configuring your lab. Wall and island configurations can be readily created and easily changed as well as moved for new applications or changing space. Can be used in conjunction with suspended, mobile or floor-mounted casework Standard tables are high and deep. Adjustable height units range from 29 38 high. They can be fixed or adjustable in height. In this model you can have leveling feet or casters installed. The table will support up to 1,000lbs. Order WB shelving separately. Shelf brackets are adjustable in 1 increments to allow for multiple configurations. Standard shelves are 12 or 16 deep. 59.969 3.000 TUBES SLOTTED ON 1" INCREMENTS FOR SHELVING ADJUSTMENT OPTIONAL SERVICES IN BACK POSTS (ELECTRICAL, PLUMBING OR DATA) see next page 85.375.000 27.000 CTF--N 1" (model as COUNTERTOP EPOXY shown) MOUNT AN OPTIONAL HANGING CABINET FROM THE UNISTRUT BARS USING STRUT NUTS AND STD BOLTS..000 workbench front view: NON-SKID FINE LEVELING FOOT TF-SL-N (model as shown) workbench end view: TWB-SL-E (model as shown) 25

Style: L Leveling feet C 0lb Standard Casters N 0lb Leveling Casters H 0lb Leveling Casters X 1000lb Leveling Casters Legs: A Adjustable S Stationary Services: (Services Must Be Same on each Post) 1,2,3 Number of Services (max 3) P Plumbing E Electrical D Data TWB-SL-2P-2E-E inches Depth inches Titan Work Bench (with services) Left Post Right Post Top: E Epoxy P Phenolic O Other N None Titan Work Bench (TWB) gives the maximum flexibility for configuring your lab. Wall and island configurations can be readily created and easily changed as well as moved for new applications or changing space. Can be used in conjunction with suspended, mobile or floor-mounted casework Standard tables are high and deep. Adjustable height units range from 29 38 high. They can be fixed or adjustable in height. In this model you can have leveling feet or casters installed. The table will support up to 1,000lbs. Order WB shelving separately. Shelf brackets are adjustable in 1 increments to allow for multiple configurations. Standard shelves are 12 or 16 deep. CTF--N (model as shown) TF-SL-N (model as shown) 26

Table Frame Style: T Table F Frame Top: E Epoxy P Phenolic O Other N None TF-35-E Table Frames Free Standing (TF) gives the maximum flexibility for configuring your lab. These tables are and deep. They can be fixed or adjustable in height. In this model you can have leveling feet or casters installed. The table will support up to 1,000lbs. Depth inches: inches: Height table frame end view: CTF--N (model as shown) table frame front view: TF-SL-N TF-SL-E (model as shown) (model as shown) 27