Metal Glazed Film Resistor High Voltage & High Ohmic Type Metal Glazed Film Resistor High Voltage & High Ohmic Type Features Low cost High resistance range (100KΩ to 100MΩ) Standard tolerance: ±1%, ±5% Varied temperatures coefficient: ±200ppm/ C RoHS compliant and halogen free Mechanical Data Bulk and 52mm tape and reel standard; ammo pack, cut and formed, and radial Panasert/Avisert available upon request Dimensions (in mm) Outline Type L ΦD H Φd T-25 RMV25 6.3±0.5 2.4±0.2 28±2.0 0.55±0.05 T-50 RMV50 9.0±0.5 3.9±0.3 26±2.0 0.55±0.05 T-100 RMV1W 11.5±1.0 4.5±0.5 35±2.0 0.80±0.05 T-200 RMV2W 15.5±1.0 5.0±0.5 33±2.0 0.80±0.05 TAITRON COMPONENTS INCORPORATED www.taitroncomponents.com Tel: (800)-TAITRON (800)-824-8766 (661)-257-6060 Fax: (800)-TAITFAX (800)-824-8329 (661)-257-6415 Page 1 of 6
Absolute Maximum Ratings & Characteristics Description RMV25 RMV50 RMV1W RMV2W Unit Power Rating at 70 C 1/4 1/2 1 2 W Maximum Working Voltage (DC) 1600 3500 5000 7000 V Maximum Overload Voltage (DC) 3000 7000 10000 14000 V Voltage Proof on Insulation 300 500 700 700 V Temperature Coefficient ±200 ppm/ C Resistance Range ±1%,±5% 100K~100M Ω Operating Temperature Range -55 to +155 C Power derating curve For resistors operate in the ambient temperature over 70 C, loading power ratio will derate in accordance with following curve. Percentage of the rated dissipating (%) Ambient Temperature ( C) www.taitroncomponents.com Page 2 of 6
Environmental Characteristics Item Test Methods Specifications Short Time Overload IEC 60115-1 4.13 2.5 Times RCWV for 5 seconds ±(2.0%+0.05Ω) Voltage Proof on Insulation IEC 60115-1 4.7 In V-Block for 60 Seconds by Type Temperature Coefficient IEC 60115-1 4.8-55 to +155 C by Type Insulation Resistance IEC 60115-1 4.6 In V-Block for 60 Seconds >10000MΩ Solderability IEC 60115-1 4.17 235 C±5 C for 3±0.5 Seconds 95% Min. Coverage Solvent Resistance of Marking IEC 60115-1 4.30 IPA for 5±0.5 Min. with ultrasonic Robustness of Terminations IEC 60115-1 4.16 Periodic-pulse Overload IEC 60115-1 4.39 Damp Heat Steady State IEC 60115-1 4.24 Endurance IEC 60115-1 4.25 Temperature Cycling IEC 60115-1 4.19 Resistance to Soldering Heat IEC 60115-1 4.18 Direct load for 10 seconds in the direction of the terminal leads 4 Times RCWV 10000 Cycles (1 sec. on, 25 sec. off) 40±2 C, 90-95% RH at RCWV for 56 days, loaded with 0.1 times RCWV 70 C at RCWV for 1000 Hrs (1.5 Hrs. on, 0.5 Hrs. off) -55 C Rom Temp. +155 C Rom Temp. for 5 Cycles 260 C±3 C for 10±1 Seconds, immersed to a point 3±0.5mm from the body Accidental Overload Test IEC 60115-1 4.26 4 Times RCWV for 1 minute No deterioration of coatings and markings >=2.5kg (24.5N) ±(1.0%+0.05Ω) ±(5.0%+0.05Ω) ±(5.0%+0.05Ω) ±(1.0%+0.05Ω) ±(1.0%+0.05Ω) No evidence of flaming or arching Packing Information: Carrier Tape Dimensions (in mm) Outline Type a A B1-B2 S (Spacing) T-25 RMV25 6±0.5 52.4±1.5 1.2 5 T-50 RMV50 6±0.5 52.4±1.5 1.2 5 T-100 RMV1W 6±0.5 73.0±1.5 1.5 5 T (Max. Deviation of Spacing) 1mm Per 10 Spacings, 0.5mm Per 5 Spacings T-200 RMV2W 6±0.5 73.0±1.5 1.5 10 www.taitroncomponents.com Page 3 of 6
Tape on Reel Pack Information Outline Reel/ Across Flange (A) Size Size (pcs) (mm) (cm) (kg) (pcs) (cm) (kg) T-25 5,000 72 29.0x8.0x29.6 1.40 50,000 60.0x30.5x43.5 16 T-50 2,500 72 29.0x8.0x29.6 1.38 25,000 60.0x30.5x43.5 15 T-100 2,000 95 29.2x9.8x29.6 1.95 20,000 60.0x30.5x54.5 21 T-200 1,000 95 29.2x9.8x29.6 1.50 10,000 60.0x30.5x54.5 16 www.taitroncomponents.com Page 4 of 6
Ammo Pack Information Outline Bulk Pack Information Size Size (pcs) (cm) (kg) (pcs) (cm) (kg) T-25 5,000 25.8x7.4x9.0 1.08 75,000 42.5x28.0x34.8 16.30 T-50 1,000 26.5x9.7x7.8 0.36 30,000 42.5x28.0x34.8 10.90 T-100 1,000 26.3x9.7x9.5 0.74 12,000 42.5x28.0x34.8 8.98 T-200 1,000 26.3x9.7x9.5 1.20 12,000 42.5x28.0x34.8 14.50 Outline Size Size (pcs) (cm) (kg) (pcs) (cm) (kg) T-25 10,000 26.3x9.7x11.7 1.82 100,000 42.5x28.0x34.8 19.0 T-50 5,000 26.3x9.7x11.7 1.93 50,000 42.5x28.0x34.8 20.0 T-100 2,000 26.3x9.7x11.7 1.64 32,000 42.5x28.0x34.8 26.0 T-200 1,000 26.3x9.7x11.7 1.06 16,000 42.5x28.0x34.8 18.0 www.taitroncomponents.com Page 5 of 6
How to order: RMV 25 G 105 J - 52 - RG20 Factory Location Code Packing RG20: 12 Reel with RoHS& halogen free AG: Tape & Ammo with RoHS& halogen free BG: Bulk with RoHS with halogen free Tolerance Code F: ±1% J: ±5% Resistance Value 105=10x10 5 =1MΩ Temperature Coefficiency G: ±200ppm Power Code 25: 1/4W, 50: 1/2W, 1W: 1W, 2W: 2W, Series Number RMV: Metal Glazed Film Resistor High Voltage & High Ohmic Type How to contact us USA HEADQUARTERS 28040 WEST HARRISON PARKWAY, VALENCIA, CA 91355-4162 Tel: (800)-TAITRON (800)-824-8766 (661)-257-6060 Fax: (800)-TAITFAX (800)-824-8329 (661)-257-6415 Email: taitron@taitroncomponents.com Http://www.taitroncomponents.com TAITRON COMPONENTS INCORPORATED TAIWAN BRANCH 6F., NO.190, SEC. 2, ZHONGXING RD., XINDIAN DIST., NEW TAIPEI CITY 23146, TAIWAN R.O.C. Tel: 886-2-2913-6238 Fax: 886-2-2913-6239 TAITRON COMPONENT TECHNOLOG SHANGHAI CORPORATION SUITE 1503, METROBANK PLAZA, 1160 WEST YAN AN ROAD, SHANGHAI, 200052, CHINA Tel: +86-21-5424-9942 Fax: +86-21-2302-5027 www.taitroncomponents.com Page 6 of 6