distributed by : Newman Tools Inc. Tel 1-800-465-1384 Fax 1-800-605-2442 Tel 613-836-6776 Fax 613-836-9070 www.newmantools.com
thread mills - product overview Thread Mills cut a thread using helical interpolation. Helical interpolation involves moving three axes simultaneously. The X and Y axes move in a circular motion while the Z axis moves in a linear motion. This allows Thread Mills to cut both right and left hand threads and to produce a variety of thread sizes (of the same pitch). ll Thread Mills are made from premium sub-micron carbide (except for T15 Powdered Metal Thread Mills) and are stocked with or without a TiLN coating. They are ground on state-of-the-art N tool and cutter grinders and have been engineered for high performance. Programming assistance is available. Straight Flute Thread Mills: Straight Flute Thread Mills are economical, offered in a large variety of sizes, and excel in a large variety of materials. ll the solid carbide straight flute thread mills (except staggered tooth) are crest cutting and are for internal threads only. UN Page 5; Metric Page 8; NPT Page 10 Staggered Tooth Thread Mills: Staggered Tooth Thread Mills have every other tooth removed in a staggered pattern. This reduces the side cutting pressure in half while still cutting the entire form. ll staggered tooth thread mills will cut both internal and external threads and excel in course pitches and difficult-to-cut materials. Page 7 Helical Flute Thread Mills: Helical Flute Thread Mills are for high performance applications in all materials. The 30º helical flute allows for reduced side cutting pressure and will cut both internal and external threads. UN Page 6; Metric Page 9; NPT Page 10 Valueline Helical Flute Thread Mills: Valueline Helical Thread Mills have a 15º helical flute and cut internal threads only. They are available only in the more popular sizes that allow for large production and economy. UN Page 6; Metric Page 9; NPT Page 10 T15 Powdered Metal Thread Mills: T15 Powdered Metal Thread Mills come with a TiN coating. They are more break resistant than carbide, excelling where rigidity is a problem. These tools will cut both internal and external threads and should be run at about one third the surface feet per minute of their carbide counterparts. Page 7 LR Long Reach Thread Mills: Long Reach Thread Mills have three teeth and a helical flute that provide reduced side cutting pressure. The first tooth roughs, the second and third finish. This allows for the efficient cutting of extremely deep threads in small sizes. These tools cut internal threads only. Page 12 SP Single Profile Thread Mills: Single Profile Thread Mills have multiple flutes but only one thread form. This provides the lowest possible side cutting pressure. It also allows for one tool to cut a large range of thread sizes in both inch and metric. ll SP s will cut both internal and external threads. Page 13 SPEILTY END MILLS - PRODUT OVERVIEW These specialty end mills feature the same premium carbide as the rest of the product line. They are ground on modern N tool and cutter grinders to tight tolerances and have been engineered for high performance. orner Rounding End Mills: orner Rounding End Mills have three flutes and are double ended to provide maximum value. The cutter diameter and the cut depth are held to ±0.001 tolerance to provide ease of set-up. Page 14 Engraving Tools: Engraving Tools come in a large variety of angles and sizes. These solid carbide tools will engrave on a large variety of materials. The tool tip is held to ±0.001 tolerance for uniformity. Page 14 i
SINGLE POINT S - product overview ll single point tools are designed for internal machining on a lathe. The helical boring bars can be used for both lathe and mill applications. ll cutting tools are made from premium sub-micron carbide and are stocked with or without a TiLN coating. HOLDERS Single Point Holders: oolant Holders have two flats on the shank, two coolant holes, and four set screws. They can be used with or without the ack Stop. Standard holders have two set screws and no flats on the shank. Page 15 ORING RS Radial Relief oring ars: Radial Relief oring ars have a radial relief behind the cutting edge that provides for a strong cutting edge. Page 16 Mini-oring ars: Mini-oring ars come in a range of diameters from to of an inch. They are fluted to retain maximum strength. Page 16 oring ars: oring ars come in both right hand and left hand cut. The right hand cut boring bars come with or without a corner radius. The radius provides improved surface finish and performance. These boring bars feature a primary and secondary relief behind the cutting edge. Right hand with radius Page 18. Right hand cut without radius Page 17, Left hand Page 19 Diamond Tipped oring ars: PD Tipped oring ars are for cutting abrasive non-ferrous materials. N Tipped oring ars are for cutting hard cast iron and ferrous metal over 45 R. Page 20 Helical oring ars: Helical oring ars have a helical flute that produces less side cutting pressure (Page 21). This facilitates cutting unfavorable length-to-diameter ratios. The tools on page 22 are dimensioned to cut the minimum bore when rotated on a mill. Profile oring ars: Profile oring ars are ideal for internal profiling on N lathes. Page 23 ack hamfer oring ars: ack hamfer oring ars are designed to bore a diameter and cut a chamfer at the end of a hole. They also excel for cutting thread reliefs. Page 23 THREDING S cme Threading Tools: cme Threading Tools come in both stub acme and full acme profiles. Page 24 Thread Tools Qualified: Thread Tools Qualified have a positive top rake on the flute and a qualified length from the thread form to the back of the tool. Page 25 Thread Tools: Threading Tools come in many different sizes. This facilitates selecting the tool with maximum rigidity. Page 26 GROOVING S Groove Tools Retaining Ring: Retaining Ring Groove Tools cut an internal groove with straight edges. Page 27 Groove Tools Full Radius: Full Radius Groove Tools cut an internal groove with straight edges and a full radius. Page 28 O-Ring Groove Tools: O-Ring Groove Tools are ideal for machining a groove with tapered sides. Page 28 ii
GROOVING S (cont.) Undercut Groove Tools: Undercut Groove tools are offered in two different styles: with or without a radius. They are ideal for undercutting a sharp inside corner. The undercut tool with a radius can also be used as a profile tool. Page 29 Face Groove Tools: Face Groove Tools cut a groove in the face of the part. Page 29 PORT S - product overview ll Port Tools are ground between centers to ensure absolute concentricity. They are made from heat-treated alloy steel with brazed carbide inserts. They are designed to enlarge a pre-drilled hole and easily produce a complex form. Port Tools can be used for both lathe and mill applications. Tapered Pipe Reamer: Tapered Pipe Reamers prepare a hole to be threaded with a NPT thread. They cut the 1º47 angle and the 45º lead in angle. Page 30 ritish Standard Parallel Pipe: ritish Standard Parallel Pipe port tools cut the minor thread diameter, the 45º angle, and the spot face. Page 30 MS16142: MS16142 port tools come in two different styles. With the solid pilot tool, the minor diameter must be cut to size before the tool can be used. This tool excels when the thread depth deviates from standard. The reamer pilot tool cuts the minor thread diameter to size. Other names for this port are SEJ1926, SEJ514, and the O-Ring oss (OR). Page 31 ISO6149-1: ISO6149-1 port tools come in two different types. s indicated by the ISO6149-1 specification, the port can be with or without an ID notch. This port is also called the SEJ2244-1. Page 32 MS33649: MS33649 port tools come in two different styles. With the solid pilot tool, the minor diameter must be cut to size before the tool can be used. This tool excels when the thread depth deviates from standard. The reamer pilot tool cuts the minor thread diameter to size. lso know as the S5202. Page 33 ND10050: ND10050 port tools come in two different styles. With the solid pilot tool, the minor diameter must be cut to size before the tool can be used. This tool excels when the thread depth deviates from standard. The reamer pilot cuts the minor thread diameter to size. Page 34 MS33514: MS33514 port tools are essentially a solid pilot tool. The bore diameter must be cut to size before the tool is used. Other names for this port tool include MS33515 and S33514. Page 35 RPT Rosan avity: RPT port tools cut the rosan cavity per S1300 specification. nother name for this port is PS10035. Page 35 Hydraforce: Hydraforce arbide Valve Tools are designed to quickly and easily cut these otherwise difficult-to-cut cavities. Roughing step drills are also available. Page 36 MS21921: MS21921 port tools are made with the same quality heat-treated steel and carbide as the rest of our port tools. Page 37 MS33651: This carbide tipped port tool also meets the requirements of the ND10071 port. Page 37 Hard To Find Port Tools: Many of these hard-to-find port tools are stocked tools. They also serve as an example of the types of specials we make on a daily basis. Page 38 iii
Table of ontents THRED MILLS Page UN THRED - STRIGHT FLUTE... 5 UN THRED - HELIL FLUTE... 6 UN THRED - VLUELINE HELIL... 6 UN THRED - STGGERED TOOTH... 7 UN THRED - T15 POWDERED METL... 7 METRI THRED - STRIGHT FLUTE... 8 METRI THRED - HELIL FLUTE... 9 METRI VLUELINE HELIL FLUTE... 9 NPT THRED... 10 SPP, SPT & EXTERNL UNJ THRED... 11 LONG REH THRED MILLS (LR).... 12 SINGLE PROFILE THRED MILLS (SP)... 13 THRED MILL FEED & SPEED HRT... 39 SPEILTY END MILLS ORNER ROUNDING END MILLS... 14 ENGRVING S.... 14 SINGLE POINT S HOLDERS OOLNT & STNDRD HOLDERS.... 15 K STOPS... 15 ORING RS RDIL RELIEF / I-ORING RS... 16 ORING RS... 17 Radius oring ars - Solid arbide... 18 LEFT HND ORING RS.... 19 N - PD ORING RS... 20 HELIL ORING RS.... 21, 22 PROFILE / K HMFER.... 23 THREDING S ME THREDING S... 24 THRED S QULIFIED... 25 THRED S... 26 GROOVE S RETINING RING.... 27 FULL RDIUS / O-RING.... 28 UNDERUT / FE GROOVE... 29 PORT S TPERED PIPE REMERS & SPP... 30 MS16142-S / MS16142-R.... 31 ISO6149-1 / ISO6149-1 with ID Notch... 32 MS33649-S / MS33649-R..... 33 ND10050-S / ND10050-R.... 34 MS33514 & RPT(S1300)-ROSN... 35 HYDRFORE RTRIDGE VLVE S - RIDE TIPPED... 36 MS21921 / D2036.... 37 HRD TO FIND Port tools... 38 1 thread mills specialty end mills single point S port tools
EXMPLE: How to use the THRED MILL LOTOR thread mills LINE NUMER THRED SIZE PGE NUMER ROW LOTION 50 3/8-20 5E, 6K, 7, 7, 13L, 40 50 3/8-20 5E, 6K, 7, 7, 13L, 40 51 3/8-24 5F, 6H, 6L, 7, 7, 13L, 41 52 3/8-27 5G, 6M, 7D, 13I-13L 53 3/8-28 7, 13L, 43 54 3/8-32 5H, 6N, 7D, 13L, 44 55 3/8-36 7E, 13L, 45 56 3/8-40 7F, 13L, 46 57.390-27 52 58 7/16-14 5I, 6I, 6O, 7Y, 13L 59 7/16-16 7G, 48 60 7/16-18 5J, 6P, 7H, 49 61 7/16-20 5K, 6Q, 6G, 7I, 50 LOTION OF LL THRED MILLS THT WILL UT THE 3/8-20 THRED LL THRED MILLS IN LINE 50 WILL LSO UT THE 7/16-20 THRED 61 7/16-20 5K, 6Q, 6G, 7I, 50 To find a thread mill to cut a 7/16-20 internal thread, simply look for the 7/16-20 in the chart. It s located on line 61. Line 61 lists several location numbers. These numbers will show all the tools available to produce this thread. The location numbers on line 61 are 5K, 6Q, 6G, 7I, 50. The first number indicates the page in the catalog where the tool is found. For 5K, look on catalog page 5 and then search for 5K. The letters follow alphabetically down the columns. The 6Q, 6G and 7I are more options for cutting the 7/16-20 thread. Notice the 50 located at the end of line 61. This indicates that Line 50 lists more thread mills that will cut the 7/16-20 thread. The tools in line 50 will cut both the 3/8-20 and the 7/16-20 internal threads. Why use the 3/8-20 thread mill for cutting a 7/16-20 thread? lthough the 7/16-20 is larger and stronger, the smaller thread mill will allow for better chip evacuation and better coolant penetration. lso, the smaller thread mill will run at a higher RPM for the designated Surface Feet Per Minute (SFPM). oth would be an excellent choice. If the thread mill is small and the length of thread deep, always use the largest tool available. For larger thread sizes with more favorable length-to-diameter ratios, a smaller size thread mill of the same pitch can be used quite effectively. 2
thread mill locator INTERNL UN THREDS LINE THRED LOTION LINE THRED LOTION LINE THRED LOTION 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 0-80 1-64 1-72 2-56 2-64 3-48 3-56 4-40 4-48 5-40 5-44 6-32 6-40 8-32 8-36 10-24 10-28 10-32 10-36 10-40 10-48 10-56 12-24 12-28 12-32 12-36 12-40 12-48 12-56 1/4-20 1/4-24 1/4-27 1/4-28 1/4-32 1/4-36 1/4-40 1/4-48 1/4-56 5/16-18 5/16-20 5/16-24 5/16-27 5/16-28 5/16-32 5/16-36 5/16-40 5/16-48 3/8-16 3/8-18 3/8-20 3/8-24 3/8-27 3/8-28 3/8-32 3/8-36 3/8-40.390-27 7/16-14 13 13 13 12, 13, 13D 13, 13D 13E 13-13E 5, 6W, 12, 13F 13E, 13F 8 13F 5, 6X, 12, 13G 5, 12D, 13F, 13G 5D, 5G, 6Y, 7K, 12E, 13G, 13H 5E, 7L, 13G, 13H 5F, 5H, 6, 6, 6Z, 7M, 12F, 13I 5I, 6, 6, 7N, 13I 5J, 6D, 6, 7O, 12G, 13G-13I 13I, 15 13F-13I, 13 5K, 6E, 12H, 13E-13I 13-13I 16 17 18 5P, 6J, 13G-13I 20 21 13-13I 5L, 5Q, 6F, 6K, 6 7P, 12I, 13J 5M, 5R, 6G, 6L, 7Q, 13I, 13J 13I, 13J 5N, 5S, 6H, 6M, 6D, 7R, 12J, 13J 5O, 5T, 6I, 6N, 7S, 12K, 13G-13J 5P, 5U, 6J, 6O, 13G-13J 5V, 6P, 13F-13J 5W, 13E-13J 13-13J 5X, 6Q, 6E, 7T, 12L, 13K 5Y, 6R, 7U, 13K, 30 5Z, 6S, 6F, 7V, 12M, 13K, 31 13I-13K 5, 6T, 7W, 12N, 13K, 33 5, 6U, 7X, 12O, 13K, 34 13K, 35 5, 6V, 12P, 13K, 36 13K, 37 5D, 6G, 6J, 7Z, 12Q, 13K, 13L 7, 13L, 39 5E, 6K, 7, 7, 13L, 40 5F, 6H, 6L, 7, 7, 13L, 41 5G, 6M, 7D, 13I-13L 7, 13L, 43 5H, 6N, 7D, 13L, 44 7E, 13L, 45 7F, 13L, 46 52 5I, 6I, 6O, 7Y, 13L 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 7/16-16 7/16-18 7/16-20 7/16-24 7/16-27 7/16-28 7/16-32 1/2-12 1/2-13 1/2-14 1/2-16 1/2-18 1/2-20 1/2-24 1/2-27 1/2-28 1/2-32 9/16-12 9/16-14 9/16-16 9/16-18 9/16-20 9/16-24 9/16-27 9/16-28 9/16-32 5/8-11 5/8-12 5/8-14 5/8-16 5/8-18 5/8-20 5/8-24 5/8-27 5/8-28 5/8-32 11/16-12 11/16-16 11/16-20 11/16-24 11/16-28 11/16-32 3/4-10 3/4-12 3/4-14 3/4-16 3/4-18 3/4-20 3/4-24 3/4-27 3/4-28 3/4-32 13/16-12 13/16-16 13/16-20 13/16-28 13/16-32 7/8-9 7G, 48 5J, 6P, 7H, 49 5K, 6Q, 6G, 7I, 50 5L, 6R, 7J, 51 52 5M, 6S, 53 54 5N, 6T, 12R, 13M 5O, 6U, 6H, 7N, 13M 13M, 58 5P, 6V, 13M, 59 12S, 13M, 60 5Q, 6W, 7O, 12T, 13M, 61 5R, 6X, 7P, 13M, 62 13M, 52 5S, 6Y, 7Q, 13M, 64 5T, 6Z, 7R, 13M, 54 5W, 6, 6I, 66 13M, 58 5X, 6D, 69 5Y, 6E, 6J, 70 5Z, 6F, 71 72 13M, 52 74 75 5V, 6, 6K, 7T, 13N 5, 7E, 7U, 13N, 76 5, 7F, 13M, 13N, 58 5, 7G, 7V, 13N, 78 7W, 13N, 79 7X, 13N, 80 13N, 72 13M, 13N, 52 13N, 74 13N, 75 86 88 90 13N, 72 13N, 74 13N, 75 5U, 6, 6L, 7S, 13O 6M, 7Z, 13O, 86 6N, 7, 13O, 87 6O, 7, 13O, 88 13O, 89 7, 13O, 90 13N, 13O, 72 13M-13O, 52 13N, 13O, 74 13N, 13O, 75 102 104 106 13N, 13O, 74 13N, 13O, 75 5E, 6P, 7Y, 13P 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 7/8-10 7/8-12 7/8-14 7/8-16 7/8-18 7/8-20 7/8-24 7/8-27 7/8-28 7/8-32 15/16-12 15/16-16 15/16-20 15/16-28 15/16-32 1-8 1-10 1-12 1-14 1-16 1-18 1-20 1-24 1-27 1-28 1-32 1-1/4-7 1-1/4-8 1-1/4-10 1-1/4-12 1-1/4-14 1-1/4-16 1-1/4-18 1-1/4-20 1-1/4-24 1-1/4-28 1-3/8-6 1-3/8-8 1-3/8-10 1-3/8-12 1-3/8-14 1-3/8-16 1-3/8-18 1-3/8-20 1-3/8-24 1-3/8-28 1-1/2-6 1-1/2-8 1-1/2-10 1-1/2-12 1-1/2-14 1-1/2-16 1-1/2-18 1-1/2-20 1-1/2-24 1-1/2-28 13P, 101 5F, 13P, 102 5G, 13P, 103 5H, 13P, 104 13O, 13P, 89 13P, 106 13N-13P, 72 13M-13O, 52 13N, 13O, 74 13N, 13O, 75 118 120 13P, 106 13N, 13O, 74 13N, 13O, 75 5D, 5J, 6Q, 7D, 13P 5K, 7E, 117 5L, 7H, 7F, 118 5M, 7I, 7G, 119 5N, 7H, 120 7J, 13O, 13P, 89 5O, 7K, 7I, 13P, 106 13N-13P, 72 13M-13O, 52 13N, 13O, 74 13N, 13O, 75 5I, 13Q 13Q, 132 133 134 135 136 137 138 13N-13P, 72 13N, 13O, 74 13Q 13Q, 132 133 134 135 136 137 138 13N-13P, 72 13N, 13O, 74 5P, 13Q 5Q, 13Q, 132 5R, 133 5S, 7L, 134 135 5T, 7M, 136 137 138 13N-13P, 72 13N, 13O, 74 thread mills 3
thread mill locator INTERNL METRI THREDS thread mills LINE THRED LOTION LINE THRED LOTION LINE THRED LOTION 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 M1.4-.3 M1.6-.35 M1.8-.35 M2-.4 M2.5 -.45 M3-.35 M3-.5 M3.5-.35 M3.5-.6 M4-.5 M4-.7 M4.5-.5 M4.5-.75 M5-.5 M5-.7 M5-.8 M6-.5 M6-.75 M6-1.0 M6-1.25 M8-.75 13 13 13, 13 12U, 13, 13 13, 13D 13-13E 8, 8Q, 12V, 13E, 13F 13-13E 8, 8R, 13F, 13G 8, 8S, 12W, 13G, 13H, 7 8D, 8T, 12X, 13G, 13H 9L, 13I, 10 8E, 8U, 13G-13H 13I, 10 8F, 8L, 13I, 11 8G, 8M, 9M, 12Y, 13G-13I 8H, 8N, 9, 9J,13I, 13J, 10 8I, 8O, 9, 9K, 13I, 13J, 13 8J, 8P, 9, 9N, 9, 12Z, 13I, 13J 8K, 8Q, 9D, 9 8L, 9E, 9O, 12, 13K, 18 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 M8-1.0 M8-1.25 M9-1.25 M10-.75 M10-1.0 M10-1.25 M10-1.5 M11-1.5 M12-1.0 M12-1.25 M12-1.5 M12-1.75 M12-2.0 M14-1.0 M14-1.25 M14-1.5 M14-1.75 M14-2.0 M16-1.0 M16-1.5 M16-2.0 8M, 9F, 13K, 19 8N, 9G, 9P, 12, 13J, 13K, 20 23 13L, 21 8O, 9H, 12, 13L, 22 13L, 23 8P, 9I, 9Q, 12D, 13K, 13L 28 8Y, 9U, 9, 13M, 26 8V, 9R, 13L, 13M, 23 8W, 9S, 13M, 28 8X, 9T, 9D, 13L, 13M 12E, 13M 13N, 30 8Z, 9V, 31 8, 9W, 9E, 32 8, 9X, 33 8, 9Y, 34 13N, 30 13N, 37 9F, 13N, 39 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 M18-1.0 M18-1.5 M18-2.5 M20-1.0 M20-1.5 M20-2.0 M20-2.5 M24-1.0 M24-1.5 M24-2.0 M24-2.5 M24-3.0 M27-3.0 M30-1.0 M30-1.5 M30-2.0 M30-3.0 M30-3.5 M33-3.5 M36-4.0 M40-6.0 13N, 13O, 30 9G, 13N, 13O, 37 8D, 9Z 13N, 13O, 30 13N, 13O, 37 13N, 13O, 42 9H, 13O, 45 8E, 43 8F, 13P, 44 8G, 13O, 13P, 42 8H, 13O, 13P, 45 8I, 13P 54 50 51 52 54 13Q 13Q 8J, 13Q 8K, 13Q TPI UN EXternal EXTERNL THREDS metric EXT. -4 13Q 6.00 13Q -6 13Q 5.50 13Q -7 13Q 5.00 13Q -8 7D, 13P, 13Q 4.50 13Q -9 7Y, 13P 4.00 13Q -10 6, 7S, 7E, 13O, 13P 3.50 13Q -11 6, 7T, 13N-13P 13P -12 6T, 6, 7E, 7H, 7L, 7U, 7Z, 7F, 13M-13P 9Z, 13O, 13P -13 6U, 7N, 13M-13P 9Y, 13M-13P -14 6O, 7Y, 7F, 7I, 7, 7G, 13L-13P 1.75 9T, 9X, 13L-13P -16 6J, 6V, 6D, 7G, 7Z, 7G, 7M, 7V, 7, 7H, 13K-13P 9I, 9S, 9W, 13K-13P -18 6Q, 6P, 6E, 7H, 7T, 7, 7J, 7W, 13J-13P 1.25 9G, 9R, 9V, 13J-13P -20 6R, 6K, 6Q, 6W, 6F, 7, 7I, 7U, 7, 7K, 7O, 7X, 7, 7I, 13J-13P 1.00 9F, 9H, 9U, 13I-13O -24 6S, 6L, 6R, 6X, 7, 7J, 7V, 7, 7P, 13I-13P 0.80 13G-13O -27 6M, 7D, 13I-13O 0.75 9E, 13G-13O -28 6T, 6S, 6Y, 7, 7W, 7Q, 13I-13O 0.70 13G-13L -32 6U, 6N, 6Z, 7D, 7X, 7R, 13G-13O 0.60 13F-13L -36 7E, 13G-13L 0.50 13E-13K -40 6V, 7F, 13F-13L 0.45 13-13J -48 13E-13K 0.40 13-13G -56 13-13J 0.35 13-13E -64 13-13G 0.30 13-13E -72 13-13D -80 13-13D 4
THRED MILLS - UN THRED - STRIGHT FLUTE - RIDE Internal only Thread Mills can cut any larger size internal thread of the same pitch ID THRED/ DI. UNOTED Internal Threads Only - TiLN TiLN LO 3 flute solid carbide, 1/4" shank dia., 2 ½" oal 4-40 0.210 080-40 080-40 5 6-32 6-40 8-32 8-36 8-24 8-32 10-24 10-28 10-32 10-48 1/4-20 1/4-24 1/4-28 1/4-32 1/4-36 1/4-20 1/4-24 1/4-28 1/4-32 1/4-36 1/4-40 1/4-48 5/16-18 5/16-20 5/16-24 5/16-28 5/16-32 5/16-40 0.098 0.098 0.235 0.235 0.235 0.235 0.235 0.235 0.263 0.260 0.325 0.345 0.345 0.392 0.409 0.388 0.383 0.570 0.559 0.552 0.545 0.540 0.570 0.559 0.552 0.545 0.540 0.560 0.560 0.689 0.670 0.684 0.657 0.669 0.660 098-32 098-40 110-32 110-36 125-24 125-32 140-24 140-28 140-32 140-48 170-20 170-24 170-28 170-32 170-36 187-20 187-24 187-28 187-32 187-36 187-40 187-48 235-18 235-20 235-24 235-28 235-32 235-40 098-32 098-40 110-32 110-36 125-24 125-32 140-24 140-28 140-32 140-48 170-20 170-24 170-28 170-32 170-36 187-20 187-24 187-28 187-32 187-36 187-40 187-48 235-18 235-20 235-24 234-28 235-32 235-40 5 5 5D 5E 5F 5G 5H 5I 5J 5K 5L 5M 5N 5O 5P 5Q 5R 5S 5T 5U 5V 5W 5X 5Y 5Z 5 5 5 4 flute solid carbide, 5/16" shank dia., 3 ½" oal 3/8-16 3/8-20 3/8-24 3/8-27 3/8-32 0.775 0.820 0.809 0.794 0.794 290-16 290-20 290-24 290-27 290-32 290-16 290-20 290-24 290-27 290-32 5D 5E 5F 5G 5H 4 flute solid carbide, 3/8" shank dia., 3 ½" oal 7/16-14 7/16-18 7/16-20 7/16-24 7/16-28 0.345 0.345 0.345 0.345 0.345 0.816 0.821 0.809 345-14 345-18 345-20 345-24 345-28 345-14 345-18 345-20 345-24 345-28 5I 5J 5K 5L 5M Internal only ID THRED/ DI. UNOTED TiLN LO 4 flute solid carbide, 1/2" shank dia., 3 ½" oal 1/2-12 1/2-13 1/2-16 1.035 1.108 1.030 400-12 400-13 400-16 400-12 400-13 400-16 5N 5O 5P 1/2-20 1/2-24 1/2-28 1/2-32 3/4-10 5/8-11 9/16-12 9/16-16 9/16-18 9/16-20 1.070 1.058 1.050 1.077 1.140 1.127 1.117 1.150 1.134 1.070 400-20 400-24 400-28 400-32 450-10 450-11 450-12 450-16 450-18 450-20 400-20 400-24 400-28 400-32 450-10 450-11 450-12 450-16 450-18 450-20 5Q 5R 5S 5T 5U 5V 5W 5X 5Y 5Z 6 flute solid carbide, 1/2" shank dia., 3 ½" oal 5/8-12 1.035 490-12 490-12 5 5/8-14 1.030 490-14 490-14 5 5/8-16 1.030 490-16 490-16 5 6 flute solid carbide, 5/8" shank dia., 3 ½" oal 1.0-8 7/8-9 7/8-12 7/8-14 7/8-16 0.620 0.620 0.620 0.620 0.620 1.052 1.050 1.039 1.035 1.031 620-8 620-9 620-12 620-14 620-16 620-8 620-9 620-12 620-14 620-16 5D 5E 5F 5G 5H 4 flute carbide TIPPED, 3/4" STEEL shank, 6" oal 1 ¼-7 1-8 1-10 1-12 0.740 0.740 0.740 0.740 1.135 1.118 1.097 1.080 740-7 740-8 740-10 740-12 740-7 740-8 740-10 740-12 5I 5J 5K 5L 1-14 1-16 1-20 0.740 0.740 0.740 1.140 1.122 1.097 740-14 740-16 740-20 740-14 740-16 740-20 5M 5N 5O 6 flute carbide TIPPED, 1" STEEL shank, 7 ½" oal 1 ½-6 1 ½-8 0.990 0.990 1.152 1.122 990-6 990-8 990-6 990-8 5P 5Q 1 ½-10 1 ½-12 1 ½-16 0.990 0.990 0.990 1.195 1.166 1.122 990-10 990-12 990-16 990-10 990-12 990-16 5R 5S 5T thread mills Tools in box can be shortened for increased strength. 24 hour tunaround. No extra charge. Stocked: TiLN = ; Optional: TiN =, TiN = N 5
THRED MILLS - UN THRED - helical FLUTE - RIDE thread mills Internal only Internal or external ID THRED/ DI. UNOTED Internal or External Threads - TiLN Thread Mills can cut any larger size internal thread of the same pitch TiLN LO 3 FLUTE SOLID RIDE, 1/4" SHNK DI., 2 ½" Oal 10-24 125-24H 125-24H 6 10-24 10-28 10-32 10-48 1/4-20 1/4-24 1/4-28 1/4-32 1/4-36 1/4-20 1/4-24 1/4-28 1/4-32 1/4-36 1/4-40 0.392 0.407 0.388 0.383 0.520 0.517 0.514 0.513 0.511 0.520 0.517 0.514 0.513 0.511 0.511 140-24H 140-28H 140-32H 140-48H 170-20H 170-24H 170-28H 170-32H 170-36H 187-20H 187-24H 187-28H 187-32H 187-36H 187-40H 140-24H 140-28H 140-32H 140-48H 170-20H 170-24H 170-28H 170-32H 170-36H 187-20H 187-24H 187-28H 6 6 6D 6E 6F 6G 6H 6I 6J 6K 6L 6M 187-32H 6N 187-36H 6O 187-40H 6P 3 FLUTE SOLID RIDE, 1/4" SHNK DI., 2 ½" Oal 5/16-18 5/16-20 5/16-24 5/16-28 5/16-32 5/16-40 0.235 0.235 0.235 0.235 0.235 0.235 0.689 0.670 0.684 0.657 0.669 0.660 235-18H 235-20H 235-24H 235-28H 235-32H 235-40H 235-18H 235-20H 235-24H 234-28H 235-32H 235-40H Stocked: TiLN = ; Optional: TiN =, TiN = N 6Q 6R 6S 6T 6U 6V Internal or external ID THRED/ DI. UNOTED TiLN LO 4 flute solid carbide, 5/16" shank dia., 3 ½" Oal 3/8-16 3/8-20 3/8-24 3/8-27 3/8-32 0.775 0.820 0.808 0.793 0.794 290-16H 290-20H 290-24H 290-27H 290-32H 290-16H 290-20H 290-24H 290-27H 290-32H 6J 6K 6L 6M 6N 4 flute solid carbide, 3/8" shank dia., 3 ½" Oal 7/16-14 7/16-18 7/16-20 7/16-24 7/16-28 0.345 0.345 0.345 0.345 0.345 0.814 0.820 0.808 345-14H 345-18H 345-20H 345-24H 345-28H 345-14H 345-18H 345-20H 345-24H 345-28H 6O 6P 6Q 6R 6S 4 flute solid carbide, 1/2" shank dia., 3 ½" Oal 1/2-12 1/2-13 1/2-16 1.117 1.108 1.088 400-12H 400-13H 400-16H 400-12H 400-13H 400-16H 6T 6U 6V 1/2-20 1/2-24 1/2-28 1/2-32 3/4-10 5/8-11 9/16-12 9/16-16 9/16-18 9/16-20 1.120 1.100 1.086 1.094 1.140 1.127 1.117 1.088 1.078 1.120 400-20H 400-24H 400-28H 400-32H 450-10H 450-11H 450-12H 450-16H 450-18H 450-20H 400-20H 400-24H 400-28H 400-32H 450-10H 450-11H 450-12H 450-16H 450-18H 450-20H thred MILLS - VLUELINE HELIL FLUTE - SOLID RIDE 6W 6X 6Y 6Z 6 6 6 6D 6E 6F Internal only ID THRED/ DI. TiLN LO 2 flute solid carbide, 1/4" shank dia., 2 ½" oal 4-40 6-32 0.079 0.185 0.263 I079-40H I100-32H 6W 6X 3 flute solid carbide, 1/4" shank dia., 2 ½" oal 8-32 10-24 10-28 10-32 1/4-20 1/4-28 5/16-18 5/16-24 0.115 0.234 0.234 0.263 0.351 0.336 0.326 0.521 0.515 0.632 0.641 I115-32H I120-24H I120-28H I120-32H I180-20H I180-28H I234-18H I234-24H 6Y 6Z 6 6 6 6D 6E 6F 4 FLUTE SOLID RIDE, 5/16" SHNK dia., 3" oal 3/8-16 3/8-24 7/16-14 0.285 0.285 0.305 0.775 0.766 0.886 Internal Threads Only - TiLN I285-16H I285-24H I305-14H 6G 6H 6I Internal only ID THRED/ DI. TiLN LO 4 flute solid carbide, 3/8" shank dia., 3" oal 7/16-20 1/2-13 9/16-12 9/16-18 0.335 0.370 0.370 0.870 0.877 0.867 0.911 I335-20H I350-13H I370-12H I370-18H 6G 6H 6I 6J 4 flute solid carbide, 1/2" shank dia., 4" oal 5/8-11 3/4-10 3/4-12 3/4-14 3/4-16 0.470 0.495 0.495 0.495 0.495 1.309 1.340 1.283 1.314 1.338 I470-11H I495-10H I495-12H I495-14H I495-16H 6K 6L 6M 6N 6O 4 FLUTE SOLID RIDE, 5/8" shank dia., 4" oal 7/8-9 1.0-8 0.620 0.620 1.489 1.550 I620-9H I620-8H 6P 6Q 6
THRED MILLS - UN THRED - RIDE Internal or external ID THRED/ DI. Staggered Tooth Internal or External Threads - TiLN Thread Mills can cut any larger size internal thread of the same pitch UNOTED TiLN 4 flute solid carbide, 1/4" shank DI., 2 ½" Oal 3/8-20 3/8-24 3/8-28 3/8-32 3/8-36 3/8-40 0.675 0.687 0.661 0.672 0.682 0.662 250-20 250-24 250-28 250-32 250-36 250-40 250-20 250-24 250-28 250-32 250-36 250-40 LO 7 7 7 7D 7E 7F 4 FLUTE SOLID RIDE HED, 3/4" STEEL SHNK, 6" Oal 7/16-16 7/16-18 7/16-20 7/16-24 0.783 0.807 0.823 0.856 350-16 350-18 350-20 350-24 350-16 350-18 350-20 350-24 7G 7H 7I 7J Internal or external ID THRED/ DI. UNOTED TiLN LO 4 flute solid carbide head, 3/4" steel shank, 6" oal 5/8-12 5/8-14 5/8-16 1.042 1.037 1.033 500-12 500-14 500-16 500-12 500-14 500-16 7E 7F 7G 4 FLUTE RIDE TIPPED, 3/4" STEEL SHNK, 6" Oal 1-12 1-14 1-18 1-20 1.176 1.152 1.117 1.106 750-12 750-14 750-18 750-20 750-12 750-14 750-18 750-20 7H 7I 7J 7K 6 FLUTE RIDE TIPPED, 1" STEEL SHNK, 7 ½" Oal 1 ½-12 1 ½-16 1.176 1.196 1000-12 1000-16 1000-12 1000-16 7L 7M thread mills Stocked: TiLN = ; Optional: TiN =, TiN = N Thread Mills - un thread - T15 powdered metal Internal only Internal or external ID THRED/ DI. TiN 3 flute, 1/4" shank DI., 2 ½" oal 8-32 8-36 10-24 10-28 10-32 1/4-20 1/4-24 1/4-28 1/4-32 0.115 0.115 0.130 0.130 0.130 0.325 0.407 0.336 0.356 0.520 0.517 0.514 0.513 115-32N 115-36N 130-24N 130-28N 130-32N 180-20N 180-24N 180-28N 180-32N 3 flute, 1/4" shank DI., 2 ½" oal 5/16-18 5/16-20 5/16-24 5/16-28 5/16-32 0.240 0.240 0.240 0.240 0.240 0.689 0.670 0.683 0.693 0.669 240-18N 240-20N 240-24N 240-28N 240-32N 4 FLUTE, 3/8" SHNK DI., 3 ½" oal 7/16-14 3/8-16 3/8-18 3/8-20 3/8-24 3/8-27 0.295 0.295 0.295 0.295 0.295 0.295 0.814 0.838 0.856 0.820 0.850 0.830 Internal or External Threads - TiN 295-14N 295-16N 295-18N 295-20N 295-24N 295-27N LO 7K 7L 7M 7N 7O 7P 7Q 7R 7S 7T 7U 7V 7W 7X 7Y 7Z 7 7 7 7D Internal or external ID THRED/ DI. TiN 4 flute, 1/2" shank DI., 4" oal 1/2-13 1/2-20 1/2-24 1/2-28 1/2-32 0.395 0.395 0.395 0.395 0.395 0.877 0.870 0.892 0.871 0.888 395-13N 395-20N 395-24N 395-28N 395-32N 6 flute, 1/2" shank DI., 4" oal 3/4-10 5/8-11 5/8-12 5/8-16 5/8-18 5/8-20 0.480 0.480 0.480 0.480 0.480 0.480 1.140 1.127 1.117 1.088 1.134 1.120 480-10N 480-11N 480-12N 480-16N 480-18N 480-20N 6 flute, 5/8" shank DI., 4" oal 7/8-9 3/4-12 3/4-14 3/4-16 3/4-20 1.156 1.117 1.100 1.088 1.120 600-9N 600-12N 600-14N 600-16N 600-20N 6 flute, 3/4" shank DI., 4" oal 1.0-8 1.0-10 1.0-12 1.0-14 1.0-16 1.0-20 0.735 0.735 0.735 0.735 0.735 0.735 1.300 1.340 1.283 1.314 1.338 1.320 735-8N 735-10N 735-12N 735-14N 735-16N 735-20N LO 7N 7O 7P 7Q 7R 7S 7T 7U 7V 7W 7X 7Y 7Z 7 7 7 7D 7E 7F 7G 7H 7I 7
thread mills - metric - straight flute - carbide thread mills Internal only Thread Mills can cut any larger size internal thread of the same pitch ID THRED/ DI. UNOTED Internal Threads Only - TiLN TiLN 3 flute solid carbide, 1/4" shank dia., 2 ½" oal 3-.5 3.5-.6 4-.5 4-.7 4.5-.75 5-.7 5-.8 6-.5 6-.75 6-1 6-1.25 0.264 0.269 0.323 0.342 0.337 0.397 0.391 0.520 0.543 0.528 0.561 3-.5mm 3.5-.6mm 4-.5mm 4-.7mm 4.5-.75mm 5-.7mm 5-.8mm 6-.5mm 6-.75mm 6-1mm 6-1.25mm 3-.5mm- 3.5-.6mm- 4-.5mm- 4-.7mm- 4.5-.75mm- 5-.7mm- 5-.8mm- 6-.5mm- 6-.75mm- 6-1mm- 6-1.25mm- 3 flute solid carbide, 1/4" shank dia., 2 ½" oal 8-.75 8-1 8-1.25 0.235 0.235 0.235 0.662 0.685 0.660 8-.75mm 8-1mm 8-1.25mm 8-.75mm- 8-1mm- 8-1.25mm- 4 flute solid carbide, 5/16" shank dia., 3 ½" oal 10-1 10-1.5 0.803 0.792 10-1mm 10-1.5mm 10-1mm- 10-1.5mm- LO 8 8 8 8D 8E 8F 8G 8H 8I 8J 8K 8L 8M 8N 8O 8P Internal only ID THRED/ DI. UNOTED ORDER TiLN 4 flute solid carbide, 3/8" shank dia., 3 ½" oal 12-1.25 12-1.5 12-1.75 0.345 0.345 0.345 0.807 0.792 0.787 12-1.25mm 12-1.5mm 12-1.75mm 12-1.25mm- 12-1.5mm- 12-1.75mm- 4 flute solid carbide, 1/2" shank dia., 3 ½" oal 12-1 1.079 12-1mm 12-1mm- LO 8V 8W 8X 8Y 14-1.25 14-1.5 14-1.75 14-2 16-2.5 1.103 1.087 1.134 1.134 1.122 14-1.25mm 14-1.5mm 14-1.75mm 14-2mm 16-2.5mm 14-1.25mm- 14-1.5mm- 14-1.75mm- 14-2mm- 16-2.5mm- 8Z 8 8 8 8D 4 flute carbide TIPPED, 3/4" steel Shank dia., 6" oal 24-1 24-1.5 24-2 24-2.5 24-3 0.740 0.740 0.740 0.740 0.740 1.062 1.058 1.100 1.076 1.058 24-1mm 24-1.5mm 24-2mm 24-2.5mm 24-3mm 24-1mm- 24-1.5mm- 24-2mm- 24-2.5mm- 24-3mm- 8E 8F 8G 8H 8I 6 flute carbide TIPPED, 1" steel Shank dia., 7 ½" oal 36-4 40-6 0.990 0.990 1.095 1.192 36-4mm 40-6mm 36-4mm- 40-6mm- 8J 8K metric - short series* - solid carbide Internal Threads Only - TiLN Internal only ID THRED DI. UNOTED ORDER TiLN 3 flute solid carbide, 1/4" shank dia., 2 ½" oal 3-.5 3.5-.6 4-.5 4-.7 4.5-.75 0.165 0.175 0.205 0.204 3-.5mm-S 3.5-.6mm-S 4-.5mm-S 4-.7mm-S 4.5-.75mm-S 3-.5mm-S 3.5-.6mm-S 4-.5mm-S 4-.7mm-S 4.5-.75mm-S Stocked: TiLN = ; Optional: TiN =, TiN = N LO 8Q 8R 8S 8T 8U Internal only ID THRED DI. UNOTED TiLN 3 flute solid carwbide, 1/4" shank dia., 2 ½" oal 5-.7 5-.8 6-.5 6-.75 6-1 6-1.25 0.259 0.265 0.325 0.337 0.333 0.364 5-.7mm-S 5-.8mm-S 6-.5mm-S 6-.75mm-S 6-1mm-S 6-1.25mm-S 5-.7mm-S 5-.8mm-S 6-.5mm-S 6-.75mm-S 6-1mm-S 6-1.25mm-S LO 8L 8M 8N 8O 8P 8Q * IS REDUED FOR ETTER -TO-DIMETER RTIO 8
thread mills - metric - helical flute - carbide Internal only Internal or external Thread Mills can cut any larger size internal thread of the same pitch ID THRED/ DI. UNOTED Internal or External Threads - TiLN TiLN 3 flute solid carbide, 1/4" shank dia., 2 ½" oal 6-.5 6-.75 6-1 6-1.25 0.520 0.543 0.528 0.561 6-.5mm-H 6-.75mm-H 6-1mm-H 6-1.25mm-H LO 6-.5mm-H 9 6-.75mm-H 9 6-1mm-H 9 6-1.25mm-H 9D 3 flute SOLID carbide, 1/4" shank dia., 2 ½" oal 8-.75 8-1 8-1.25 0.235 0.235 0.235 0.662 0.685 0.660 8-.75mm-H 8-1mm-H 8-1.25mm-H 8-.75mm-H 9E 8-1mm-H 9F 8-1.25mm-H 9G 4 flute SOLID carbide, 5/16" shank dia., 3 ½" oal 10-1 0.803 10-1mm-H 10-1mm-H 9H 10-1.5 0.792 10-1.5mm-H 10-1.5mm-H 9I Internal or external ID THRED/ DI. UNOTED TiLN 4 flute solid carbide, 3/8" shank dia., 3 ½" oal 12-1.25 12-1.5 12-1.75 0.345 0.345 0.345 0.807 0.792 0.787 12-1.25mm-H 12-1.5mm-H 12-1.75mm-H 12-1.25mm-H 12-1.5mm-H 12-1.75mm-H 4 flute SOLID carbide, 1/2" shank dia., 3 ½" oal 12-1 1.079 12-1mm-H 12-1mm-H 14-1.25 14-1.5 14-1.75 14-2 16-2.5 1.103 1.087 1.134 1.134 1.122 14-1.25mm-H 14-1.5mm-H 14-1.75mm-H 14-2mm-H 16-2.5mm-H 14-1.25mm-H 14-1.5mm-H 14-1.75mm-H 14-2mm-H 16-2.5mm-H LO 9R 9S 9T 9U 9V 9W 9X 9Y 9Z thread mills METRI DIMETER SHNKS VILLE UPON REQUEST Short Series* - Internal Threads Only - TiLN Internal only ID THRED/ DI. UNOTED TiLN 3 flute solid carbide, 1/4" shank dia., 2 ½" oal 6-.5 6-.75 0.325 0.337 6-.5mm-SH 6-.75mm-SH 6-.5mm-SH 6-.75mm-SH LO 9J 9K Internal only ID THRED/ DI. UNOTED TiLN 3 flute solid carbide, 1/4" shank dia., 2 ½" oal 6-1 6-1.25 0.331 0.364 6-1mm-SH 6-1.25mm-SH 6-1mm-SH 6-1.25mm-SH LO 9 9 Stocked: TiLN = ; Optional: TiN =, TiN = N * IS REDUED FOR ETTER -TO-DIMETER RTIO Internal only metric - VLUELINE HELIL FLUTE - carbide ID THRED/ (mm) DI. Internal Threads Only - TiLN TiLN 3 FLUTE SOLID RIDE, 6mm shank dia., 58 oal M4.5 M5.0 M6.0 M8.0 M8.0 0.75 0.80 1.00 0.75 1.25 0.118 0.118 0.169 0.236 0.236 0.248 0.328 0.488 0.632 0.659 I4.5-0.75-H I5.0-0.80-H I6.0-1.00-H I8.0-0.75-H I8.0-1.25-H LO 9L 9M 9N 9O 9P 4 flute solid carbide, 8mm shank dia., 75 oal M10 0.790 I10--H 9Q Internal only ID THRED/ (mm) DI. TiLN LO 4 flute solid carbide, 10mm shank dia., 100 oal M12 M12 M14 1.00 1.75 0.370 0.881 0.923 0.909 I12-1.00-H I12-1.75-H I14--H 9 9D 9E 4 flute solid carbide, 12mm shank dia., 100 oal M16 M18 M20 0.470 0.470 0.470 1.290 1.263 1.318 I16--H I18--H I20--H 9F 9G 9H 9
thread mills - npt - carbide (national pipe taper) thread mills Internal or external Internal or external SHNK DIMETER/ OVERLL 4 Flute solid carbide 1/4" shank, 2 ½" OL 3/8 shank, 3 ½ OL 3/8 shank, 3 ½ OL 7/16 shank, 3 ½ OL 1/2 shank, 3 ½ OL THRED DI./ 1/16, 1/8-27 1/8-27 1/4, 3/8-18 1/4, 3/8-18 1/2, 3/4-14 5 Flute solid carbide 3/4 shank, 4 OL 3/4 shank, 4 OL SHNK DIMETER/ OVERLL 4 Flute carbide 1/4" shank, 2 ½" OL 3/8 shank, 3 ½ OL 3/8 shank, 3 ½ OL 7/16 shank, 3 ½ OL 1/2 shank, 3 ½ OL 3/4 steel shank, 6 OL Straight Flute - Internal or External Threads - TiLN 1 to 2-11 ½ 2 ½ up-8 THRED DI./ 1/16, 1/8-27 1/8-27 1/4, 3/8-18 1/4, 3/8-18 1/2, 3/4-14 1/2, 3/4-14 DI. 0.218 0.280 0.330 0.382 0.430 0.650 0.650 DI. 0.220 0.275 0.335 0.387 0.435 0.440 0.534 0.758 0.693 1.105 1.605 1.560 0.534 0.758 0.693 0.805 1.034 1.034 UNOTED 218-27NPT 280-27NPT 330-18NPT 382-18NPT 430-14NPT 650-11.5NPT 650-8NPT UNOTED 220-27NPT 275-27NPT 335-18NPT 387-18NPT 435-14NPT 440-14NPT TiLN 218-27NPT- 280-27NPT- 330-18NPT- 382-18NPT- 430-14NPT- 650-11.5NPT- 650-8NPT- TiLN 220-27NPT- 275-27NPT- 335-18NPT- 387-18NPT- 435-14NPT- 440-14NPT- DRYSEL UNOTED TILN 218-27NPTF 280-27NPTF 330-18NPTF 382-18NPTF 430-14NPTF 650-11.5NPTF 650-8NPTF 218-27NPTF- 280-27NPTF- 330-18NPTF- 382-18NPTF- 430-14NPTF- 650-11.5NPTF 650-8NPTF Straight Flute Staggered Tooth - Internal or External Threads - TiLN DRYSEL UNOTED TiLN 220-27NPTF 275-27NPTF 335-18NPTF 387-18NPTF 435-14NPTF 440-14NPTF 220-27NPTF- 275-27NPTF- 335-18NPTF- 387-18NPTF- 435-14NPTF- 440-14NPTF- 6 Flute carbide tipped 1 shank, 7 ½" OL 1 ¼ to 2-11 ½ 2.083 1.0-11.5NPT 1.0-11.5NPT- 1.0-11.5NPTF 1.0-11.5NPTF- Internal or external SHNK DIMETER/ OVERLL 4 Flute solid carbide 1/4" shank, 2 ½" OL 3/8 shank, 3 ½ OL 3/8 shank, 3 ½ OL 7/16 shank, 3 ½ OL 1/2 shank, 3 ½ OL Helical Flute - Internal or External Threads - TiLN THRED DI./ 1/16, 1/8-27 1/8-27 1/4, 3/8-18 1/4, 3/8-18 1/2, 3/4-14 DI. 0.218 0.280 0.330 0.382 0.430 0.534 0.758 0.693 1.105 Stocked: TiLN = ; Optional: TiN =, TiN = N THRED SIZE DI. 3 Flute solid carbide UNOTED 218-27NPT-H 280-27NPT-H 330-18NPT-H 382-18NPT-H 430-14NPT-H TiLN 218-27NPT-H 280-27NPT-H 330-18NPT-H 382-18NPT-H 430-14NPT-H SHNK DI. OVERLL DRYSEL UNOTED TiLN 218-27NPTF-H 280-27NPTF-H 330-18NPTF-H 382-18NPTF-H 430-14NPTF-H Valueline Helical Flute - Internal or External Threads - TiLN Internal or external TiLN 1/6 & 1/8 NPT 27 0.222 0.461 X222-27-H 4 Flute solid carbide 1/4 & 3/8 NPT 1/2 & 3/4 NPT 1" to 2" NPT 18 14 11.5 0.270 0.440 0.550 0.636 0.890 1.171 4.00 4.00 X270-18-H X440-14-H X550-11.5-H 218-27NPTF-H 280-27NPTF-H 330-18NPTF-H 382-18NPTF-H 430-14NPTF-H 10
thread mills - bspp - SOLID RIDE (ritish standard pipe parallel) Internal or external THRED DI./ DI. 4 flute SOLID RIDE 1/16, 1/8-28 1/4, 3/8-19 1/2, 3/4-14 0.245 0.345 0.657 0.811 1.100 SHNK DI. OL 3.50 3.50 UNOTED 245-28SPP 345-19SPP 450-14SPP TiLN 245-28SPP- 345-19SPP- 450-14SPP- 5 flute SOLID RIDE 1.0 up-8 0.620 1.125 3.50 620-11SPP 620-11SPP- thread mills thread mills - bspt - SOLID RIDE (ritish standard pipe taper) Internal or external THRED DI./ DI. 4 flute SOLID RIDE 1/16, 1/8-28 1/4, 3/8-19 1/2, 3/4-14 0.215 0.335 0.430 0.550 0.650 1.100 SHNK DI. OL 3.50 3.50 UNOTED 215-28SPT 335-19SPT 430-14SPT TiLN 215-28SPT- 335-19SPT- 430-14SPT- 5 flute SOLID RIDE 1.0 up-8 0.550 1.127 3.50 550-11SPT 550-11SPT- thread mills - EXj - SOLID RIDE (external j thread) External Only EXTERNL THRED/ DI. ROOT RDIUS UNOTED 4 flute SOLID RIDE, 1/4" shank DI., 2 ½" oal UNJ-32 UNJ-28 UNJ-24 0.245 0.245 0.245 0.668 0.657 0.683 0.0051 0.0059 0.0069 245-32EXJ 245-28EXJ 245-24EXJ 5 flute SOLID RIDE, 3/8" shank DI., 3 ½" oal UNJ-20 UNJ-18 UNJ-16 0.370 0.370 0.370 0.773 0.774 0.0082 0.0091 0.0103 370-20EXJ 370-18EXJ 370-16EXJ TiLN 245-32EXJ- 245-28EXJ- 245-24EXJ- 370-20EXJ- 370-18EXJ- 370-16EXJ- External Only EXTERNL THRED/ DI. ROOT RDIUS UNOTED 6 flute SOLID RIDE, 1/2" shank DI., 3 ½" oal UNJ-14 UNJ-12 UNJ-10 UNJ-8 0.495 0.495 0.495 0.495 1.027 1.031 1.037 1.046 0.0118 0.0137 0.0165 7 495-14EXJ 495-12EXJ 495-10EXJ 495-8EXJ Stocked: TiLN = ; Optional: TiN =, TiN = N TiLN 495-14EXJ- 495-12EXJ- 495-10EXJ- 495-8EXJ- 11
thread mills LONG REH (LR) - SOLID RIDE thread mills UN Threads Internal Threads Only - TiLN Small bore thread milling made easy. Economical cost per hole. ID THRED/ DI. TiLN LO 3 flute SOLID RIDE, 1/4" Shank DI., 2 ½" OL 2-56 2-56 4-40 4-40 0.065 0.065 0.082 0.082 0.225 LR065-56 LR065-56EL LR082-40 LR082-40EL 12 12 12 12 Helical cutting geometry. TiLN coated micrograin carbide. Excels in difficult-to-thread materials. Thread sizes starting from 2-56un or M2 x.4mm. Internal only 6-32 6-32 6-40 6-40 8-32 8-32 10-24 10-24 10-32 10-32 10-48 10-48 1/4-20 1/4-20 1/4-28 1/4-28 1/4-32 1/4-32 5/16-18 5/16-18 5/16-24 5/16-24 5/16-28 5/16-28 5/16-32 5/16-32 5/16-40 5/16-40 0.139 0.139 0.139 0.139 0.139 0.139 0.186 0.186 0.186 0.186 0.186 0.186 0.238 0.238 0.238 0.238 0.238 0.238 0.238 0.238 0.238 0.238 0.260 0.260 0.850 0.850 0.850 0.850 0.850 LR100-32 LR100-32EL LR100-40 LR100-40EL LR126-32 LR126-32EL LR139-24 LR139-24EL LR139-32 LR139-32EL LR139-48 LR139-48EL LR186-20 LR186-20EL LR186-28 LR186-28EL LR186-32 LR186-32EL LR238-18 LR238-18EL LR238-24 LR238-24EL LR238-28 LR238-28EL LR238-32 LR238-32EL LR238-40 LR238-40EL 12 12 12D 12D 12E 12E 12F 12F 12G 12G 12H 12H 12I 12I 12J 12J 12K 12K 12L 12L 12M 12M 12N 12N 12O 12O 12P 12P 3 flute SOLID RIDE, 3/8" SHNK DI., 3 ½" OL 3/8-16 3/8-16 1/2-12 1/2-12 1/2-18 1/2-18 1/2-20 1/2-20 0.295 0.295 0.370 0.370 0.370 0.370 0.370 0.370 1.200 1.200 1.200 LR295-16 LR295-16EL LR370-12 LR370-12EL LR370-18 LR370-18EL LR370-20 LR370-20EL 12Q 12Q 12R 12R 12S 12S 12T 12T Internal only Metric Threads Internal Threads Only - TiLN ID THRED/ DI. TiLN LO 3 flute SOLID RIDE, 1/4" Shank DI., 2 ½" OL M2-.4 M2-.4 M3-.5 M3-.5 M4-.5 M4-.5 M4-.7 M4-.7 M5-.8 M5-.8 M6-1 M6-1 M8-.75 M8-.75 M8-1.25 M8-1.25 0.061 0.061 0.234 0.234 0.234 0.234 0.225 0.850 0.850 LR2-.4mm LR2-.4mmEL LR3-.5mm LR3-.5mmEL LR4-.5mm LR4-.5mmEL LR4-.7mm LR4-.7mmEL LR5-.8mm LR5-.8mmEL LR6-1mm LR6-1mmEL LR8-.75mm LR8-.75mmEL LR8-1.25mm LR8-1.25mmEL 12U 12U 12V 12V 12W 12W 12X 12X 12Y 12Y 12Z 12Z 12 12 12 12 3 flute SOLID RIDE, 3/8" SHNK DI., 3 ½" OL M10-1 M10-1 M10-1.5 M10-1.5 M12-2 M12-2 0.310 0.310 0.310 0.310 0.370 0.370 1.200 LR10-1mm LR10-1mmEL LR10-1.5mm LR10-1.5mmEL LR12-2mm LR12-2mmEL 12 12 12D 12D 12E 12E 12
single profile thread mills (SP) - solid carbide Manufactured from solid carbide, providing maximum tool rigidity. Long reach tools available from stock for unfavorable length-to-diameter ratios. With only seventeen different Thread Mills, you can mill coarse or fine threads from 0 to 1 ½ plus. Single profile design provides controllable pitch diameter and cut depth. The tools will cut both UN and Metric sizes. Tools will cut both internal and external threads. thread mills UN & Metric Threads Internal or External UN & Metric Threads Internal or External I.D. THRED DI. NEK NEK DI. REOM- MENDED T.P.I. UNOTED TiLN 2 Flute SOLID RIDE, 1/8" SHNK DI., 1 ½" OL LO I.D. THRED DI. NEK NEK DI. REOM- MENDED T.P.I. UNOTED 4 FLUTE SOLID RIDE, 1/4" SHNK DI., 2 ½" OL TiLN LO Internal or external 0 0 0.022 0.022 72 to 90 72 to 90 SP040 SP040L 3 Flute SOLID RIDE, 1/8" SHNK DI., 1 ½" OL 1 1 2 2 0.059 0.059 0.028 0.028 0.034 0.034 64 to 80 64 to 80 56 to 80 56 to 80 SP050 SP050L SP059 SP059L 3 Flute SOLID RIDE, 3/16" SHNK DI., 2.0" OL 2 2 3 3 4 4 6 6 8 8 10 10 0.072 0.072 0.098 0.098 0.138 0.138 0.190 0.034 0.034 0.049 0.049 56 to 80 56 to 80 48 to 72 48 to 72 40 to 64 40 to 64 32 to 64 32 to 64 32 to 56 32 to 56 24 to 56 24 to 56 SP060 SP060L SP072 SP072L SP080 SP080L SP098 SP098L SP120 SP120L SP138 SP138L SP040 SP040L SP050 SP050L SP059 SP059L SP060 SP060L SP072 SP072L SP080 SP080L SP098 SP098L SP120 SP120L SP138 SP138L 13 13 13 13 13 13 13D 13D 13E 13E 13F 13F 13G 13G 13H 13H 13I 13I Internal or external 1/4 1/4 5/16 5/16 0.182 0.182 0.240 0.240 0.650 0.104 0.104 0.153 0.153 18 to 56 18 to 56 16 to 48 16 to 48 SP182 SP182L SP240 SP240L 4 FLUTE SOLID RIDE, 3/8" SHNK DI., 3" OL 3/8 3/8 1/2 1/2 0.372 0.372 1.200 0.192 0.192 0.240 0.240 14 to 40 14 to 40 12 to 32 12 to 32 SP290 SP290L SP372 SP372L 5 FLUTE SOLID RIDE, 1/2" SHNK DI., 3 ½" OL 5/8 5/8 0.488 0.488 0.850 1.350 0.340 0.340 11 to 32 11 to 32 SP488 SP488L 6 FLUTE SOLID RIDE, 5/8" SHNK DI., 4" OL 3/4 3/4 0.595 0.595 0 0.430 0.430 10 to 32 10 to 32 SP595 SP595L 6 FLUTE SOLID RIDE, 3/4" SHNK DI., 5" OL 7/8 7/8 1 ¼ 1 ¼ 0.695 0.695 0.745 0.745 0 0 8 to 24 8 to 24 4 to 8 4 to 8 SP695 SP695L SP745 SP745L SP182 SP182L SP240 SP240L SP290 SP290L SP372 SP372L SP488 SP488L SP595 SP595L SP695 SP695L SP745 SP745L 13J 13J 13K 13K 13L 13L 13M 13M 13N 13N 13O 13O 13P 13P 13Q 13Q Stocked: TiLN = ; Optional: TiN =, TiN = N 13
orner rounding end mills - SOLID RIDE ENGRVING S SOLID RIDE specialty end mills RDIUS SIZE OR DI. UT UNOTED 3 FLUTE, 1/8" SHNK DI., 1 ½" oal 0.005 0.008 0.010 0.023 R125005 R125008 R125010 R125015 3 FLUTE, 3/16" SHNK DI., 2" oal 0.010 0.031 0.046 R187010 R187015 R187020 R187031 3 FLUTE, 1/4" SHNK DI., 2 ½" oal 0.010 0.031 0.046 0.062 0.072 0.046 0.061 0.065 0.077 0.087 R250010 R250015 R250020 R250025 R250031 R250035 R250040 R250046 R250050 R250055 R250062 R250072 3 FLUTE, 3/8" SHNK DI., 2 ½" oal 0.078 0.085 0.118 0.098 0.105 0.114 0.130 0.138 0.145 R375078 R375085 R375094 R375100 R375110 R375118 R375125 3 FLUTE, 1/2" SHNK DI., 3" oal 0.156 0.172 0.176 0.192 0.207 R500140 R500156 R500172 R500187 TiLN R125005 R125008 R125010 R125015 R187010 R187015 R187020 R187031 R250010 R250015 R250020 R250025 R250031 R250035 R250040 R250046 R250050 R250055 R250062 R250072 R375078 R375085 R375094 R375100 R375110 R375118 R375125 R500140 R500156 R500172 R500187 SHNK DI. OVERLL TIP DI. 30 DEGREE INLUDED NGLE 0 5 0 5 0 0 0.005 0.007 0.009 0.011 0.013 40 DEGREE INLUDED NGLE 0 5 0 5 0 0 0.005 0.007 0.009 0.011 0.013 60 DEGREE INLUDED NGLE 0 5 0 5 0 0 0.005 0.007 0.009 0.011 0.013 90 DEGREE INLUDED NGLE 0 5 0 5 0 0 0.005 0.007 0.009 0.011 0.013 120 DEGREE INLUDED NGLE 0 5 0 5 0 0 0.005 0.007 0.009 0.011 0.013 UNOTED EN125-30 EN187-30 EN250-30 EN312-30 EN375-30 EN500-30 EN125-40 EN187-40 EN250-40 EN312-40 EN375-40 EN500-40 EN125-60 EN187-60 EN250-60 EN312-60 EN375-60 EN500-60 EN125-90 EN187-90 EN250-90 EN312-90 EN375-90 EN500-90 EN125-120 EN187-120 EN250-120 EN312-120 EN375-120 EN500-120 TiLN EN125-30 EN187-30 EN250-30 EN312-30 EN375-30 EN500-30 EN125-40 EN187-40 EN250-40 EN312-40 EN375-40 EN500-40 EN125-60 EN187-60 EN250-60 EN312-60 EN375-60 EN500-60 EN125-90 EN187-90 EN250-90 EN312-90 EN375-90 EN500-90 EN125-120 EN187-120 EN250-120 EN312-120 EN375-120 EN500-120 Stocked: TiLN = ; Optional: TiN =, TiN = N 14
coolant holders standard holders QH Holders Standard Holders I.D. 0 0.1562 5 0 5 0 0 0.1562 5 0.2187 0 O.D. NPT OL Order 0.062NPT 0.062NPT 0.062NPT NPT NPT NPT NPT NPT NPT NPT NPT QH37-1/8 QH37-5/32 QH37-3/16 QH50-1/8 QH50-3/16 QH50-1/4 QH62-1/8 QH62-5/32 QH62-3/16 QH62-7/32 QH62-1/4 Replacement Parts Kit (6) Set Screws (1) llen Key PKH-3/16 PKH-3/16 PKH-3/16 PKH-3/16 PKH-3/16 I.D. 0 0.1562 5 0.2187 0 0 0.1562 5 0.2187 0 5 0 O.D. OL Order DH37-1/8 DH37-5/32 DH37-3/16 DH37-7/32 DH37-1/4 DH50-1/8 DH50-5/32 DH50-3/16 DH50-7/32 DH50-1/4 DH50-5/16 DH50-3/8 Replacement Parts Kit (6) Set Screws (1) llen Key PKH-3/16 PKH-3/16 PKH-3/16 PKH-3/16 PKH-1/8 PKH-3/16 PKH-3/16 PKH-3/16 PKH-1/8 0 0.1562 5 0.2187 0 5 0 0 5 0 5 0 0 NPT NPT NPT NPT NPT NPT NPT NPT NPT NPT NPT NPT NPT QH75-1/8 QH75-5/32 QH75-3/16 QH75-7/32 QH75-1/4 QH75-5/16 QH75-3/8 QH10-1/8 QH10-3/16 QH10-1/4 QH10-5/16 QH10-3/8 QH10-1/2 back stops PKH-3/8 PKH-3/8 PKH-1/2 PKH-1/2 PKH-3/8 PKH-3/8 PKH-3/8 ack Stops for QH Series 0 0.1562 5 0.2187 0 5 0 0 5 0 5 0 0 DH62-1/8 DH62-5/32 DH62-3/16 DH62-7/32 DH62-1/4 DH62-5/16 DH62-3/8 DH75-1/8 DH75-3/16 DH75-1/4 DH75-5/16 DH75-3/8 DH75-1/2 PKH-3/16 PKH-3/16 PKH-3/8 PKH-3/8 PKH-3/16 single point S Outside Diameter NPT Thread Stop Rod Diameter Stop Rod OL Holder Series Order Kit (6) Set Screws (1) llen Key 0.062NPT NPT NPT NPT NPT 0.093 3.50 QH37 QH50 QH62 QH75 QH10 QH37-KS QH50-KS QH62-KS QH75-KS QH10-KS PKH-1/8 PKH-1/8 PKH-3/16 PKH-3/16 PKH-3/16 15
oring ars - Radial Relief - Solid arbide single point S OL 1/8" SHNK DI. 0.105 0.105 0.105 0.105 MX 3/16" SHNK DI. MX 0.155 0.155 0.155 0.155 0.155 0.185 0.185 0.185 0.185 UNOTED 61 62 63 64 71 72 73 74 91 92 93 94 95 102 103 104 105 122 123 124 125 126 153 154 155 156 158 183 184 185 186 TiLN 61 62 63 64 71 72 73 74 91 92 93 94 95 102 103 104 105 122 123 124 125 126 153 154 155 156 158 183 184 185 186 OL 3/16" SHNK DI. 0.185 0.185 1/4" SHNK DI. 0.220 0.220 0.220 0.220 0.220 0.248 0.248 0.248 0.248 0.248 0.248 MX 5/16" SHNK DI. 0.310 0.310 0.310 0.310 0.310 0.310 0.310 3/8" SHNK DI. 0.373 0.373 0.373 0.373 0.373 0.373 0.373 0.373 0.373 1.750 1.750 0 UNOTED 188 1812 224 225 226 228 2212 254 255 256 258 2512 2514 314 316 316L 318 3112 3114 3116 374 376 376L 378 3712 3714 3714L 3716 3718 Mini-oring ars - SOLID RIDE UNOTED TiLN 1/8" SHNK DI., 1 ½" Oal M015050 M020075 M015050 M020075 M025100 M025125 M030100 M030125 M030150 M025100 M025125 M030100 M030125 M030150 MX UNOTED 1/8" SHNK DI., 1 ½" Oal M035100 M035150 M035200 M040100 M040150 M040200 M040250 TiLN M035100 M035150 M035200 M040100 M040150 M040200 M040250 MX TiLN 188 1812 224 225 226 228 2212 254 255 256 258 2512 2514 314 316 316L 318 3112 3114 3116 374 376 376L 378 3712 3714 3714L 3716 3718 UNOTED 1/8" SHNK DI., 1 ½" Oal M045100 M045150 M045200 M045250 M045300 M045350 TiLN M045100 M045150 M045200 M045250 M045300 M045350 HOLDERS - SEE PGE 15 Stocked: TiLN = ; Optional: TiN =, TiN = N 16
oring ars - Solid arbide MX UNOTED 1/8" SHNK DI., 1 ½" Oal 050150 050200 050300 050400 060150 060200 060300 060400 060500 080150 080200 080300 080400 080500 080600 100150 100200 100300 100400 100500 100600 100700 110150 110200 110300 110400 110500 110600 110700 3/16" SHNK DI., 2" Oal 120250 120350 120500 120600 120700 120800 140250 140400 140500 140600 140700 140750 140800 160250 160400 160500 TiLN 050150 050200 050300 050400 060150 060200 060300 060400 060500 080150 080200 080300 080400 080500 080600 100150 100200 100300 100400 100500 100600 100700 110150 110200 110300 110400 110500 110600 110700 120250 120350 120500 120600 120700 120800 140250 140400 140500 140600 140700 140750 140800 160250 160400 160500 MX UNOTED 3/16" SHNK DI., 2" Oal 160600 160750 160900 1601000 1/4" SHNK DI., 2 ½" Oal 1.180 1.100 1.100 1.200 1.300 180350 180500 180600 180750 180900 1801000 1801100 1801250 1801500 200400 200500 200600 200700 200800 200900 2001000 2001100 2001200 2001300 TiLN 160600 160750 160900 1601000 180350 180500 180600 180750 180900 1801000 1801100 1801250 1801500 200400 200500 200600 200700 200800 200900 2001000 2001100 2001200 2001300 5/16" SHNK DI., 2 ½" Oal 1.100 1.150 1.200 1.400 1.600 230400 230500 230600 230700 230800 230900 2301000 2301100 2301150 2301200 2301250 2301400 2301500 2301600 230400 230500 230600 230700 230800 230900 2301000 2301100 2301150 2301200 2301250 2301400 2301500 2301600 1.100 1.350 1.600 1.750 290500 290600 290750 290900 2901000 2901100 2901250 2901350 2901500 2901600 2901750 290500 290600 290750 290900 2901000 2901100 2901250 2901350 2901500 2901600 2901750 MX UNOTED 3/8" SHNK DI., 2 ½" Oal 320500 320600 320750 320900 3201000 1.100 3201100 3201250 3201500 1.600 3201600 1.800 3201800 3/8" SHNK DI., 4" Oal 0 0 0 3202000 3202500 3203000 3/8" SHNK DI., 2 ½" Oal 1.150 1.600 1.800 360500 360600 360750 360900 3601000 3601150 3601250 3601500 3601600 3601800 3/8" SHNK DI., 4" Oal 0 0 0 3602000 3602500 3603000 1/2" SHNK DI., 3" Oal 490750 4901000 4901250 4901500 1/2" SHNK DI., 4" Oal 0 0 2.600 0 4902000 4902500 4902600 4902750 1/2" SHNK DI., 6" Oal 0 3.500 4.000 4.500 4903000 4903500 4904000 4904500 HOLDERS - SEE PGE 15 TiLN 320500 320600 320750 320900 3201000 3201100 3201250 3201500 3201600 3201800 3202000 3202500 3203000 360500 360600 360750 360900 3601000 3601150 3601250 3601500 3601600 3601800 3602000 3602500 3603000 490750 4901000 4901250 4901500 4902000 4902500 4902600 4902750 4903000 4903500 4904000 4904500 single point S Stocked: TiLN = ; Optional: TiN =, TiN = N 17
Radius oring ars - Solid arbide Radius.003" to.005" 1/8" SHNK DI. Radius.005" to.008" 3/16" to 1/2" SHNK DI. single point S MX UNOTED 1/8" SHNK DI., 1 ½" Oal 050150R 050200R 050300R 050400R 060150R 060200R 060300R 060400R 060500R 080150R 080200R 080300R 080400R 080500R 080600R 100150R 100200R 100300R 100400R 100500R 100600R 100700R 110150R 110200R 110300R 110400R 110500R 110600R 110700R 3/16" SHNK DI., 2" Oal 120250R 120350R 120500R 120600R 120700R 120800R 140250R 140400R 140500R 140600R 140700R 140750R 140800R 160250R 160400R 160500R TiLN 050150R 050200R 050300R 050400R 060150R 060200R 060300R 060400R 060500R 080150R 080200R 080300R 080400R 080500R 080600R 100150R 100200R 100300R 100400R 100500R 100600R 100700R 110150R 110200R 110300R 110400R 110500R 110600R 110700R 120250R 120350R 120500R 120600R 120700R 120800R 140250R 140400R 140500R 140600R 140700R 140750R 140800R 160250R 160400R 160500R MX UNOTED 3/16" SHNK DI., 2" Oal 160600R 160750R 160900R 1601000R 1/4" SHNK DI., 2 ½" Oal 1.180 1.100 1.100 1.200 1.300 180350R 180500R 180600R 180750R 180900R 1801000R 1801100R 1801250R 1801500R 200400R 200500R 200600R 200700R 200800R 200900R 2001000R 2001100R 2001200R 2001300R TiLN 160600R 160750R 160900R 1601000R 180350R 180500R 180600R 180750R 180900R 1801000R 1801100R 1801250R 1801500R 200400R 200500R 200600R 200700R 200800R 200900R 2001000R 2001100R 2001200R 2001300R 5/16" SHNK DI., 2 ½" Oal 1.100 1.150 1.200 1.400 1.600 230400R 230500R 230600R 230700R 230800R 230900R 2301000R 2301100R 2301150R 2301200R 2301250R 2301400R 2301500R 2301600R 230400R 230500R 230600R 230700R 230800R 230900R 2301000R 2301100R 2301150R 2301200R 2301250R 2301400R 2301500R 2301600R 1.100 1.350 1.600 1.750 290500R 290600R 290750R 290900R 2901000R 2901100R 2901250R 2901350R 2901500R 2901600R 2901750R 290500R 290600R 290750R 290900R 2901000R 2901100R 2901250R 2901350R 2901500R 2901600R 2901750R MX UNOTED 3/8" SHNK DI., 2 ½" Oal 320500R 320600R 320750R 320900R 3201000R 1.100 3201100R 3201250R 3201500R 1.600 3201600R 1.800 3201800R 3/8" SHNK DI., 4" Oal 0 0 0 3202000R 3202500R 3203000R 3/8" SHNK DI., 2 ½" Oal 1.150 1.600 1.800 360500R 360600R 360750R 360900R 3601000R 3601150R 3601250R 3601500R 3601600R 3601800R 3/8" SHNK DI., 4" Oal 0 0 0 3602000R 3602500R 3603000R 1/2" SHNK DI., 3" Oal 490750R 4901000R 4901250R 4901500R 1/2" SHNK DI., 4" Oal 0 0 2.600 0 4902000R 4902500R 4902600R 4902750R 1/2" SHNK DI., 6" Oal 0 3.500 4.000 4.500 4903000R 4903500R 4904000R 4904500R HOLDERS - SEE PGE 15 TiLN 320500R 320600R 320750R 320900R 3201000R 3201100R 3201250R 3201500R 3201600R 3201800R 3202000R 3202500R 3203000R 360500R 360600R 360750R 360900R 3601000R 3601150R 3601250R 3601500R 3601600R 3601800R 3602000R 3602500R 3603000R 490750R 4901000R 4901250R 4901500R 4902000R 4902500R 4902600R 4902750R 4903000R 4903500R 4904000R 4904500R Stocked: TiLN = ; Optional: TiN =, TiN = N 18
oring ars - Left hand - Solid arbide MX UNOTED 1/8" SHNK DI., 1 ½" Oal LH050150 LH050200 LH050300 LH050400 LH060150 LH060200 LH060300 LH060400 LH060500 LH080150 LH080200 LH080300 LH080400 LH080500 LH080600 LH100150 LH100200 LH100300 LH100400 LH100500 LH100600 LH100700 LH110150 LH110200 LH110300 LH110400 LH110500 LH110600 LH110700 3/16" SHNK DI., 2" Oal LH120250 LH120350 LH120500 LH120600 LH120700 LH120800 LH140250 LH140400 LH140500 LH140600 LH140700 LH140750 LH140800 LH160250 LH160400 LH160500 TiLN LH050150 LH050200 LH050300 LH050400 LH060150 LH060200 LH060300 LH060400 LH060500 LH080150 LH080200 LH080300 LH080400 LH080500 LH080600 LH100150 LH100200 LH100300 LH100400 LH100500 LH100600 LH100700 LH110150 LH110200 LH110300 LH110400 LH110500 LH110600 LH110700 LH120250 LH120350 LH120500 LH120600 LH120700 LH120800 LH140250 LH140400 LH140500 LH140600 LH140700 LH140750 LH140800 LH160250 LH160400 LH160500 MX UNOTED 3/16" SHNK DI., 2" Oal LH160600 LH160750 LH160900 LH1601000 1/4" SHNK DI., 2 ½" Oal 1.100 1.100 1.200 1.300 LH180350 LH180500 LH180600 LH180750 LH180900 LH1801000 LH1801100 LH200400 LH200500 LH200600 LH200700 LH200800 LH200900 LH2001000 LH2001100 LH2001200 LH2001300 5/16" SHNK DI., 2 ½" Oal 1.150 1.200 1.400 1.600 1.100 1.350 1.600 1.750 LH230400 LH230500 LH230600 LH230700 LH230800 LH230900 LH2301000 LH2301150 LH2301200 LH2301250 LH2301400 LH2301500 LH2301600 LH290500 LH290600 LH290750 LH290900 LH2901000 LH2901100 LH2901250 LH2901350 LH2901500 LH2901600 LH2901750 TiLN LH160600 LH160750 LH160900 LH1601000 LH180350 LH180500 LH180600 LH180750 LH180900 LH1801000 LH1801100 LH200400 LH200500 LH200600 LH200700 LH200800 LH200900 LH2001000 LH2001100 LH2001200 LH2001300 LH230400 LH230500 LH230600 LH230700 LH230800 LH230900 LH2301000 LH2301150 LH2301200 LH2301250 LH2301400 LH2301500 LH2301600 MX UNOTED 3/8" SHNK DI., 2 ½" Oal LH320500 LH320600 LH320750 LH320900 LH3201000 1.100 LH3201100 LH3201250 LH3201500 1.600 LH3201600 1.800 LH3201800 3/8" SHNK DI., 4" Oal 0 0 0 LH3202000 LH3202500 LH3203000 3/8" SHNK DI., 2 ½" Oal 1.150 1.600 1.800 LH360500 LH360600 LH360750 LH360900 LH3601000 LH3601150 LH3601250 LH3601500 LH3601600 LH3601800 3/8" SHNK DI., 4" Oal 0 0 0 LH3602000 LH3602500 LH3603000 1/2" SHNK DI., 3" Oal LH490750 LH4901000 LH4901250 LH4901500 1/2" SHNK DI., 4" Oal 0 LH4902000 LH290500 0 LH4902500 LH290600 2.600 LH4902600 LH290750 0 LH4902750 LH290900 LH2901000 1/2" SHNK DI., 6" Oal LH2901100 0 LH4903000 LH2901250 3.500 LH4903500 LH2901350 4.000 LH4904000 LH2901500 4.500 LH4904500 LH2901600 LH2901750 HOLDERS - SEE PGE 15 TiLN LH320500 LH320600 LH320750 LH320900 LH3201000 LH3201100 LH3201250 LH3201500 LH3201600 LH3201800 LH3202000 LH3202500 LH3203000 LH360500 LH360600 LH360750 LH360900 LH3601000 LH3601150 LH3601250 LH3601500 LH3601600 LH3601800 LH3602000 LH3602500 LH3603000 LH490750 LH4901000 LH4901250 LH4901500 LH4902000 LH4902500 LH4902600 LH4902750 LH4903000 LH4903500 LH4904000 LH4904500 single point S Stocked: TiLN = ; Optional: TiN =, TiN = N 19
ORING RS - cbn - pcd - diamond tipped PD for abrasive non-ferrous materials N for hard ferrous metal - 45R plus Solid arbide for maximum rigidity For non-interrupted cuts only Faster speeds and feeds For tighter tolerances PD tipped boring bars provide excellent tool life for abrasive, non-ferrous metals, such as silicon aluminum, ceramics, and composites. N tipped boring bars provide excellent tool life for abrasive cast iron and super alloys. They excel on ferrous metals over 45R. oth PD and N provide longer tool life, higher machining feeds and speeds, better quality finishes and tighter tolerances. MX PD N MX PD N MX PD N 3/16" SHNK DI., 2" Oal PD-120250 PD-120350 PD-120500 N-120250 N-120350 N-120500 1/4" SHNK DI., 2 ½" Oal PD-200800 PD-200900 PD-2001000 N-200800 N-200900 N-2001000 3/8" SHNK DI., 2 ½" Oal PD-320500 PD-320600 PD-320750 N-320500 N-320600 N-320750 PD-120600 PD-120700 PD-120800 N-120600 N-120700 N-120800 1.100 1.200 1.300 PD-2001100 PD-2001200 PD-2001300 N-2001100 N-2001200 N-2001300 1.100 PD-320900 PD-3201000 PD-3201100 N-320900 N-3201000 N-3201100 single point S PD-140250 PD-140400 PD-140500 PD-140600 PD-140700 PD-140750 PD-140800 PD-160250 PD-160400 PD-160500 PD-160600 PD-160750 PD-160900 PD-1601000 1/4" SHNK DI., 2 ½" Oal 1.100 PD-180350 PD-180500 PD-180600 PD-180750 PD-180900 PD-1801000 PD-1801100 PD-200400 PD-200500 PD-200600 PD-200700 N-140250 N-140400 N-140500 N-140600 N-140700 N-140750 N-140800 N-160250 N-160400 N-160500 N-160600 N-160750 N-160900 N-1601000 N-180350 N-180500 N-180600 N-180750 N-180900 N-1801000 N-1801100 N-200400 N-200500 N-200600 N-200700 5/16" SHNK DI., 2 ½" Oal 1.150 1.200 1.400 1.600 1.100 1.350 1.600 1.750 PD-230400 PD-230500 PD-230600 PD-230700 PD-230800 PD-230900 PD-2301000 PD-2301150 PD-2301200 PD-2301250 PD-2301400 PD-2301500 PD-2301600 PD-290500 PD-290600 PD-290750 PD-290900 PD-2901000 PD-2901100 PD-2901250 PD-2901350 PD-2901500 PD-2901600 PD-2901750 N-230400 N-230500 N-230600 N-230700 N-230800 N-230900 N-2301000 N-2301150 N-2301200 N-2301250 N-2301400 N-2301500 N-2301600 N-290500 N-290600 N-290750 N-290900 N-2901000 N-2901100 N-2901250 N-2901350 N-2901500 N-2901600 N-2901750 1.600 1.800 PD-3201250 PD-3201500 PD-3201600 PD-3201800 3/8" SHNK DI., 4" Oal 0 0 0 PD-3202000 PD-3202500 PD-3203000 3/8" SHNK DI., 2 ½" Oal 1.150 1.600 1.800 PD-360500 PD-360600 PD-360750 PD-360900 PD-3601000 PD-3601150 PD-3601250 PD-3601500 PD-3601600 PD-3601800 3/8" SHNK DI., 4" Oal 0 0 0 PD-3602000 PD-3602500 PD-3603000 HOLDERS - SEE PGE 15 N-3201250 N-3201500 N-3201600 N-3201800 N-3202000 N-3202500 N-3203000 N-360500 N-360600 N-360750 N-360900 N-3601000 N-3601150 N-3601250 N-3601500 N-3601600 N-3601800 N-3602000 N-3602500 N-3603000 20
oring ars - HELIL - Solid arbide Helical ack Rake OL 1/8" SHNK DI. 0.027 0.031 0.031 0.036 0.036 0.042 0.042 0.052 0.057 0.085 MX 0.093 0.156 0.156 0.437 0.562 0.562 WITHOUT FLT UNOTED TiLN H25 H27 H31 H31L H36 H36L H42 H42L H52 H57 H60 H60L H70 H80 H85 H90 H90L H100 H100L H110 H110L H120 H120L H25 H27 H31 H31L H36 H36L H42 H42L H52 H57 H60 H60L H70 H80 H85 H90 H90L H100 H100L H110 H110L H120 H120L WITH FLT UNOTED TiLN H25F H27F H31F H31LF H36F H36LF H42F H42LF H52F H57F H60F H60LF H70F H80F H85F H90F H90LF H100F H100LF H110F H110LF H120F H120LF H25F H27F H31F H31LF H36F H36LF H42F H42LF H52F H57F H60F H60LF H70F H80F H85F H90F H90LF H100F H100LF H110F H110LF H120F H120LF HOLDERS - SEE PGE 15 OL 1.25 1.25 1.25 3.50 4.25 5.25 0.135 0.210 0.210 0.240 0.240 0.480 0.480 SHNK DI. 0.109 0.156 0.156 0.156 0.218 0.218 0.437 0.437 UNOTED H135 H150 H150L H180 H180L H180EL H210 H210L H240 H240L H300 H300L H360 H360L H480 H480L TiLN H135 H150 H150L H180 H180L H180EL H210 H210L H240 H240L H300 H300L H360 H360L H480 H480L single point S Stocked: TiLN = ; Optional: TiN =, TiN = N 21
oring ars - HELIL - Solid arbide minimum bore diameter refers to the size of the hole that is produced when the tools are rotated on centerline. These tools are designed to be used for both mill and lathe applications. single point S ORE MX UNOTED 1/8" SHNK DI., 1 ½" OL 0.062 0.062 0.437 0.562 H020062 H025062 H025125 H030125 H030187 H035125 H035187 H040187 H040250 H050312 H060375 H070437 H080500 H090500 H100562 H120625 H1201000 3/16" SHNK DI., 2" OL 0.135 0.135 H135750 H1351000 H1501000 H1501250 H1801000 H1801250 H1801500 TiLN H020062 H025062 H025125 H030125 H030187 H035125 H035187 H040187 H040250 H050312 H060375 H070437 H080500 H090500 H100562 H120625 H1201000 H135750 H1351000 H1501000 H1501250 H1801000 H1801250 H1801500 Stocked: TiLN = ; Optional: TiN =, TiN = N ORE MX UNOTED 1/4" SHNK DI., 2 ½" OL 0.210 0.210 0.210 0.240 0.240 0.240 1.750 H2101000 H2101250 H2101500 H2401000 H2401500 H2401750 5/16" SHNK DI., 2 ½" OL 1.750 H3001000 H3001500 H3001750 3/8" SHNK DI., 2 ½" OL 1.750 H3601000 H3601500 H3601750 3/8" SHNK DI., 4" OL 0 0 0 H3602000 H3602250 H3602500 1/2" SHNK DI., 3" OL 0.480 0.480 0 H4801500 H4802000 1/2" SHNK DI., 4" OL 0.480 0.480 0 0 H4802500 H4803000 1/2" SHNK DI., 6" OL 0.480 0.480 0.480 3.500 4.000 4.500 H4803500 H4804000 H4804500 HOLDERS - SEE PGE 15 TiLN H2101000 H2101250 H2101500 H2401000 H2401500 H2401750 H3001000 H3001500 H3001750 H3601000 H3601500 H3601750 H3602000 H3602250 H3602500 H4801500 H4802000 H4802500 H4803000 H4803500 H4804000 H4804500 22
profile ORING RS - solid carbide MX OFF SET D RDIUS UNOTED TiLN MX OFF SET D RDIUS UNOTED TiLN 1/8" SHNK DI., 1 ½" OL 5/16" SHNK DI., 2 ½" OL 0.005 0.005 0.005 P090200 P090300 P090400 P090200 P090300 P090400 P290500 P290750 P2901000 P290500 P290750 P2901000 3/16" SHNK DI., 2" OL 0.007 0.007 0.007 0.010 0.010 0.010 1/4" SHNK DI., 2 ½" OL 0.010 0.010 0.010 P120250 P120500 P120750 P180500 P180750 P1801000 P230500 P230750 P2301000 P120250 P120500 P120750 P180500 P180750 P1801000 P230500 P230750 P2301000 3/8" SHNK DI., 2 ½" OL 1/2" SHNK DI., 3" OL P360500 P360750 P3601000 P3601250 P490500 P490750 P4901000 P4901250 P360500 P360750 P3601000 P3601250 P490500 P490750 P4901000 P4901250 back chamfer boring bars - solid carbide MX UT WIDTH D OFF SET 1/8" SHNK DI., 1 ½" OL 3/16" SHNK DI., 2" OL 0.650 1/4" SHNK DI., 2 ½" OL E RDIUS 0.010 0.010 0.010 UNOTED 090300 090400 090500 120400 120500 120600 180500 180650 180800 230500 230700 230900 TiLN 090300 090400 090500 120400 120500 120600 180500 180650 180800 230500 230700 230900 MX UT WIDTH D OFF SET 5/16" SHNK DI., 2 ½" OL 1.100 3/8" SHNK DI., 2 ½" OL 1/2" SHNK DI., 3" OL 0.130 0.130 0.130 HOLDERS - SEE PGE 15 E RDIUS UNOTED 290700 290900 2901100 360750 3601000 3601250 4901000 4901250 4901500 TiLN 290700 290900 2901100 360750 3601000 3601250 4901000 4901250 4901500 single point S Stocked: TiLN = ; Optional: TiN =, TiN = N 23
acme THREDING S - solid carbide single point S MX OFF SET UNOTED 1/4" SHNK DI., 2 ½" Oal *1/4-16S -.024 FLT ST180350-16 ST180500-16 ST180750-16 ST1801000-16 TiLN ST180350-16 ST180500-16 ST180750-16 ST1801000-16 5/16" SHNK DI., 2 ½" Oal *5/16-14S -.028 FLT ST230400-14 ST230600-14 ST230750-14 ST2301000-14 ST2301250-14 ST230400-14 ST230600-14 ST230750-14 ST2301000-14 ST2301250-14 5/16" SHNK DI., 2 ½" Oal *3/8-12S -.033 FLT ST290400-12 ST290600-12 ST290750-12 ST2901000-12 ST2901250-12 ST290400-12 ST290600-12 ST290750-12 ST2901000-12 ST2901250-12 3/8" SHNK DI., 2 ½" Oal *1/2-10S -.037 FLT 0.085 0.085 0.085 0.085 0.085 ST360500-10 ST360750-10 ST3601000-10 ST3601250-10 ST3601500-10 1/2" SHNK DI., 3" Oal *5/8-8S -.048 FLT 0 ST490750-8 ST4901000-8 ST4902000-8 1/2" SHNK DI., 3" Oal *3/4-6S -.065 FLT 0 ST490750-6 ST4901000-6 ST4902000-6 1/2" SHNK DI., 3" Oal *1.0-5S -.079 FLT 0 0.130 0.130 0.130 STU ME ST490750-5 ST4901000-5 ST4902000-5 Stocked: TiLN = ; Optional: TiN =, TiN = N ST360500-10 ST360750-10 ST3601000-10 ST3601250-10 ST3601500-10 ST490750-8 ST4901000-8 ST4902000-8 ST490750-6 ST4901000-6 ST4902000-6 ST490750-5 ST4901000-5 ST4902000-5 MX OFF SET FULL ME UNOTED 1/4" SHNK DI., 2 ½" Oal *1/4-16F -.021 FLT FT180350-16 FT180500-16 FT180750-16 FT1801000-16 TiLN FT180350-16 FT180500-16 FT180750-16 FT1801000-16 5/16" SHNK DI., 2 ½" Oal *5/16-14F -.024 FLT FT230400-14 FT230600-14 FT230750-14 FT2301000-14 FT2301250-14 FT230400-14 FT230600-14 FT230750-14 FT2301000-14 FT2301250-14 5/16" SHNK DI., 2 ½" Oal *3/8-12F -.028 FLT FT290400-12 FT290600-12 FT290750-12 FT2901000-12 FT2901250-12 FT290400-12 FT290600-12 FT290750-12 FT2901000-12 FT2901250-12 3/8" SHNK DI., 2 ½" Oal *1/2-10F -.032 FLT 0.085 0.085 0.085 0.085 0.085 FT360500-10 FT360750-10 FT3601000-10 FT3601250-10 FT3601500-10 1/2" SHNK DI., 3" Oal *5/8-8F -.041 FLT 0 FT490750-8 FT4901000-8 FT4902000-8 1/2" SHNK DI., 3" Oal *3/4-6F -.057 FLT 0 FT490750-6 FT4901000-6 FT4902000-6 1/2" SHNK DI., 3" Oal *1.0-5F -.069 FLT 0 0.130 0.130 0.130 FT490750-5 FT4901000-5 FT4902000-5 HOLDERS - SEE PGE 15 FT360500-10 FT360750-10 FT3601000-10 FT3601250-10 FT3601500-10 FT490750-8 FT4901000-8 FT4902000-8 FT490750-6 FT4901000-6 FT4902000-6 FT490750-5 FT4901000-5 FT4902000-5 * These tools can cut any larger size internal thread of the same pitch. 24
THREDING S QULIFIED - SOLID RIDE MX OFFSET REOM- MENDED TPI* UNOTED ORDER TiLN MX OFFSET REOM- MENDED TPI* UNOTED ORDER TiLN 1/8" SHNK DI., 1 ½" OL 1/4" SHNK DI., 2 ½" OL 40 to 80 40 to 80 40 to 80 40 to 80 TTQ060150 TTQ060200 TTQ060250 TTQ060300 TTQ060150 TTQ060200 TTQ060250 TTQ060300 16 to 40 16 to 40 16 to 40 16 to 40 TTQ200400 TTQ200600 TTQ200800 TTQ2001000 TTQ200400 TTQ200600 TTQ200800 TTQ2001000 0.062 0.062 0.062 0.062 40 to 56 40 to 56 40 to 56 40 to 56 TTQ062150 TTQ062200 TTQ062250 TTQ062300 TTQ062150 TTQ062200 TTQ062250 TTQ062300 0.202 0.202 0.202 0.202 16 to 28 16 to 28 16 to 28 16 to 28 5/16" SHNK DI., 2 ½" OL TTQ202400 TTQ202600 TTQ202800 TTQ2021000 TTQ202400 TTQ202600 TTQ202800 TTQ2021000 0.077 0.077 0.077 0.092 0.092 0.092 0.092 3/16" SHNK DI., 2" OL 0.122 0.122 0.122 0.122 0.152 0.152 0.152 1/4" SHNK DI., 2 ½" OL 0.182 0.182 0.182 0.182 36 to 72 36 to 72 36 to 72 36 to 48 36 to 48 36 to 48 32 to 64 32 to 64 32 to 64 32 to 64 32 to 48 32 to 48 32 to 48 32 to 48 24 to 56 24 to 56 24 to 56 24 to 56 24 to 32 24 to 32 24 to 32 24 to 32 20 to 56 20 to 56 20 to 56 20 to 32 20 to 32 20 to 32 18 to 56 18 to 56 18 to 56 18 to 56 18 to 32 18 to 32 18 to 32 18 to 32 TTQ075200 TTQ075300 TTQ075400 TTQ077200 TTQ077300 TTQ077400 TTQ090200 TTQ090300 TTQ090400 TTQ090500 TTQ092200 TTQ092300 TTQ092400 TTQ092500 TTQ120250 TTQ120400 TTQ120600 TTQ120750 TTQ122250 TTQ122400 TTQ122600 TTQ122750 TTQ150350 TTQ150500 TTQ150750 TTQ152350 TTQ152500 TTQ152750 TTQ180350 TTQ180500 TTQ180750 TTQ1801000 TTQ182350 TTQ182500 TTQ182750 TTQ1821000 TTQ075200 TTQ075300 TTQ075400 TTQ077200 TTQ077300 TTQ077400 TTQ090200 TTQ090300 TTQ090400 TTQ090500 TTQ092200 TTQ092300 TTQ092400 TTQ092500 TTQ120250 TTQ120400 TTQ120600 TTQ120750 TTQ122250 TTQ122400 TTQ122600 TTQ122750 TTQ150350 TTQ150500 TTQ150750 TTQ152350 TTQ152500 TTQ152750 TTQ180350 TTQ180500 TTQ180750 TTQ1801000 TTQ182350 TTQ182500 TTQ182750 TTQ1821000 0.232 0.232 0.232 0.232 0.232 0.292 0.292 0.292 0.292 0.292 14 to 40 14 to 40 14 to 40 14 to 40 14 to 40 14 to 28 14 to 28 14 to 28 14 to 28 14 to 28 12 to 40 12 to 40 12 to 40 12 to 40 12 to 40 12 to 24 12 to 24 12 to 24 12 to 24 12 to 24 3/8" SHNK DI., 2 ½" OL 0.322 0.322 0.322 0.322 0.322 0.362 0.362 0.362 0.362 0.362 10 to 32 10 to 32 10 to 32 10 to 32 10 to 32 10 to 16 10 to 16 10 to 16 10 to 16 10 to 16 8 to 24 8 to 24 8 to 24 8 to 24 8 to 24 8 to 12 8 to 12 8 to 12 8 to 12 8 to 12 TTQ230400 TTQ230600 TTQ230750 TTQ2301000 TTQ2301250 TTQ232400 TTQ232600 TTQ232750 TTQ2321000 TTQ2321250 TTQ290500 TTQ290750 TTQ2901000 TTQ2901250 TTQ2901500 TTQ292500 TTQ292750 TTQ2921000 TTQ2921250 TTQ2921500 TTQ320500 TTQ320750 TTQ3201000 TTQ3201250 TTQ3201500 TTQ322500 TTQ322750 TTQ3221000 TTQ3221250 TTQ3221500 TTQ360500 TTQ360750 TTQ3601000 TTQ3601250 TTQ3601500 TTQ362500 TTQ362750 TTQ3621000 TTQ3621250 TTQ3621500 TTQ230400 TTQ230600 TTQ230750 TTQ2301000 TTQ2301250 TTQ232400 TTQ232600 TTQ232750 TTQ2321000 TTQ2321250 TTQ290500 TTQ290750 TTQ2901000 TTQ2901250 TTQ2901500 TTQ292500 TTQ292750 TTQ2921000 TTQ2921250 TTQ2921500 TTQ320500 TTQ320750 TTQ3201000 TTQ3201250 TTQ3201500 TTQ322500 TTQ322750 TTQ3221000 TTQ3221250 TTQ3221500 TTQ360500 TTQ360750 TTQ3601000 TTQ3601250 TTQ3601500 TTQ362500 TTQ362750 TTQ3621000 TTQ3621250 TTQ3621500 single point S Stocked: TiLN = ; Optional: TiN =, TiN = N HOLDERS - SEE PGE 15 *TPI = Threads Per Inch 25
THREDING S - SOLID RIDE single point S MX OFFSET 1/8" SHNK DI., 1 ½" OL 0.130 0.013 0.013 0.013 0.017 0.017 0.017 3/16" SHNK DI., 2" OL 1/4" SHNK DI., 2 ½" OL REOM- MENDED TPI* 56 to 80 56 to 80 56 to 80 48 to 80 48 to 80 48 to 80 40 to 80 40 to 80 40 to 80 40 to 80 36 to 72 36 to 72 36 to 72 32 to 64 32 to 64 32 to 64 32 to 64 24 to 56 24 to 56 24 to 56 24 to 56 20 to 56 20 to 56 20 to 56 18 to 56 18 to 56 18 to 56 18 to 56 UNOTED TT040080 TT040100 TT040130 TT050100 TT050150 TT050200 TT060150 TT060200 TT060250 TT060300 TT075200 TT075300 TT075400 TT090200 TT090300 TT090400 TT090500 TT120250 TT120400 TT120600 TT120750 TT150350 TT150500 TT150750 TT180350 TT180500 TT180750 TT1801000 Stocked: TiLN = ; Optional: TiN =, TiN = N TiLN TT040080 TT040100 TT040130 TT050100 TT050150 TT050200 TT060150 TT060200 TT060250 TT060300 TT075200 TT075300 TT075400 TT090200 TT090300 TT090400 TT090500 TT120250 TT120400 TT120600 TT120750 TT150350 TT150500 TT150750 TT180350 TT180500 TT180750 TT1801000 MX OFFSET 1/4" SHNK DI., 2 ½" OL 5/16" SHNK DI., 2 ½" OL 3/8" SHNK DI., 2 ½" OL 1.800 1/2" SHNK DI., 3" OL 0 REOM- MENDED TPI* 16 to 40 16 to 40 16 to 40 16 to 40 14 to 40 14 to 40 14 to 40 14 to 40 14 to 40 12 to 40 12 to 40 12 to 40 12 to 40 12 to 40 10 to 32 10 to 32 10 to 32 10 to 32 10 to 32 8 to 32 8 to 32 8 to 32 8 to 32 8 to 32 8 to 32 8 to 32 8 to 32 UNOTED TT200400 TT200600 TT200800 TT2001000 TT230400 TT230600 TT230750 TT2301000 TT2301250 TT290500 TT290750 TT2901000 TT2901250 TT2901500 TT320500 TT320750 TT3201000 TT3201250 TT3201500 TT360500 TT360750 TT3601000 TT3601250 TT3601800 TT490750 TT4901500 TT4902000 TiLN TT200400 TT200600 TT200800 TT2001000 TT230400 TT230600 TT230750 TT2301000 TT2301250 TT290500 TT290750 TT2901000 TT2901250 TT2901500 TT320500 TT320750 TT3201000 TT3201250 TT3201500 TT360500 TT360750 TT3601000 TT3601250 TT3601800 TT490750 TT4901500 TT4902000 HOLDERS - SEE PGE 15 Left Hand Style vailable in ll Sizes. To Order Left Hand Style, Start the Item Number with LH. *TPI = Threads Per Inch 26
Groove tools retaining ring solid carbide MX WIDTH UNOTED TiLN 1/8" SHNK DI.,.020 OFFSET, 1 ½" Oal 0.0320 0.0320 0.0320 GT031-3 GT031-4 GT031-6 GT031-3 GT031-4 GT031-6 1/8" SHNK DI.,.030 OFFSET, 1 ½" Oal 0.0460 0.0460 0.0460 GT045-4 GT045-6 GT045-8 GT045-4 GT045-6 GT045-8 1/8" SHNK DI.,.040 OFFSET, 1 ½" Oal 0.0620 0.0620 0.0620 0.0620 GT061-4 GT061-6 GT061-8 GT061-10 3/16" SHNK DI.,.050 OFFSET, 2" Oal 0.0175 0.0175 0.0175 0.0175 5 5 5 5 5 5 5 5 0 0 0 0 GT017K-4 GT017K-6 GT017K-8 GT017K-10 GT025K-4 GT025K-6 GT025K-8 GT025K-10 GT030K-4 GT030K-6 GT030K-8 GT030K-10 GT062K-4 GT062K-6 GT062K-8 GT062K-10 GT061-4 GT061-6 GT061-8 GT061-10 1/4" SHNK DI.,.060 OFFSET, 2 ½" Oal 0.0175 0.0175 0.0175 0.0175 5 5 5 5 5 5 5 5 0 0 0 0 0.0930 0.0930 0.0930 0.0930 GT017Q-4 GT017Q-6 GT017Q-8 GT017Q-10 GT025Q-4 GT025Q-6 GT025Q-8 GT025Q-10 GT030Q-4 GT030Q-6 GT030Q-8 GT030Q-10 GT062Q-4 GT062Q-6 GT062Q-8 GT062Q-10 GT092Q-4 GT092Q-6 GT092Q-8 GT092Q-10 GT017K-4 GT017K-6 GT017K-8 GT017K-10 GT025K-4 GT025K-6 GT025K-8 GT025K-10 GT030K-4 GT030K-6 GT030K-8 GT030K-10 GT062K-4 GT062K-6 GT062K-8 GT062K-10 GT017Q-4 GT017Q-6 GT017Q-8 GT017Q-10 GT025Q-4 GT025Q-6 GT025Q-8 GT025Q-10 GT030Q-4 GT030Q-6 GT030Q-8 GT030Q-10 GT062Q-4 GT062Q-6 GT062Q-8 GT062Q-10 GT092Q-4 GT092Q-6 GT092Q-8 GT092Q-10 MX WIDTH UNOTED TiLN 5/16" SHNK DI.,.110 OFFSET, 2 ½" Oal 0.0335 0.0335 0.0335 0.0335 0.0385 0.0385 0.0385 0.0385 0 0 0 0 0 0 0 0 GT033-4 GT033-6 GT033-8 GT033-12 GT038-4 GT038-6 GT038-8 GT038-12 GT063-6 GT063-8 GT063-12 GT063-16 GT124-6 GT124-8 GT124-12 GT124-16 GT033-4 GT033-6 GT033-8 GT033-12 GT038-4 GT038-6 GT038-8 GT038-12 GT063-6 GT063-8 GT063-12 GT063-16 GT124-6 GT124-8 GT124-12 GT124-16 3/8" SHNK DI.,.110 OFFSET, 2 ½" Oal 0 0 0 0 0 0 0.0470 0.0470 0.0470 0.0470 0.0470 0.0470 0.0560 0.0560 0.0560 0.0560 0.0560 0.0560 0 0 0 0 0 0 0 0 0 0 0 0 GT039-4 GT039-6 GT039-8 GT039-12 GT039-16 GT039-20 GT046-4 GT046-6 GT046-8 GT046-12 GT046-16 GT046-20 GT055-4 GT055-6 GT055-8 GT055-12 GT055-16 GT055-20 GT062-4 GT062-6 GT062-8 GT062-12 GT062-16 GT062-20 GT069-4 GT069-6 GT069-8 GT069-12 GT069-16 GT069-20 GT039-4 GT039-6 GT039-8 GT039-12 GT039-16 GT039-20 GT046-4 GT046-6 GT046-8 GT046-12 GT046-16 GT046-20 GT055-4 GT055-6 GT055-8 GT055-12 GT055-16 GT055-20 GT062-4 GT062-6 GT062-8 GT062-12 GT062-16 GT062-20 GT069-4 GT069-6 GT069-8 GT069-12 GT069-16 GT069-20 MX WIDTH UNOTED TiLN 3/8" SHNK DI.,.110 OFFSET, 2 ½" Oal 0.088 0.088 0.088 0.088 0.088 0.088 0.127 0.127 0.127 0.127 0.127 0.158 0.158 0.158 0.158 0.158 GT087-4 GT087-6 GT087-8 GT087-12 GT087-16 GT087-20 GT126-6 GT126-8 GT126-12 GT126-16 GT126-20 GT157-6 GT157-8 GT157-12 GT157-16 GT157-20 GT087-4 GT087-6 GT087-8 GT087-12 GT087-16 GT087-20 GT126-6 GT126-8 GT126-12 GT126-16 GT126-20 GT157-6 GT157-8 GT157-12 GT157-16 GT157-20 1/2" SHNK DI.,.160 OFFSET, 3" OL 0.157 0.157 0.157 0.157 0.157 0.188 0.188 0.188 0.188 0.188 0.251 0.251 0.251 0.251 0.251 GT093-8 GT093-12 GT093-16 GT093-20 GT093-24 GT125-8 GT125-12 GT125-16 GT125-20 GT125-24 GT156-8 GT156-12 GT156-16 GT156-20 GT156-24 GT187-8 GT187-12 GT187-16 GT187-20 GT187-24 GT250-8 GT250-12 GT250-16 GT250-20 GT250-24 HOLDERS - SEE PGE 15 GT093-8 GT093-12 GT093-16 GT093-20 GT093-24 GT125-8 GT125-12 GT125-16 GT125-20 GT125-24 GT156-8 GT156-12 GT156-16 GT156-20 GT156-24 GT187-8 GT187-12 GT187-16 GT187-20 GT187-24 GT250-8 GT250-12 GT250-16 GT250-20 GT250-24 single point S Stocked: TiLN = ; Optional: TiN =, TiN = N 27
Groove tools - full radius - solid carbide single point S MX WIDTH UNOTED TiLN 3/16" SHNK DI.,.050 OFFSET, 2" Oal 0.0175 0.0175 0.0175 0.0175 5 5 5 5 5 5 5 5 GFR017K-4 GFR017K-6 GFR017K-8 GFR017K-10 GFR025K-4 GFR025K-6 GFR025K-8 GFR025K-10 GFR030K-4 GFR030K-6 GFR030K-8 GFR030K-10 GFR017K-4 GFR017K-6 GFR017K-8 GFR017K-10 GFR025K-4 GFR025K-6 GFR025K-8 GFR025K-10 GFR030K-4 GFR030K-6 GFR030K-8 GFR030K-10 1/4" SHNK DI.,.060 OFFSET, 2 ½" Oal 0.0175 0.0175 0.0175 0.0175 5 5 5 5 5 5 5 5 GFR017Q-4 GFR017Q-6 GFR017Q-8 GFR017Q-10 GFR025Q-4 GFR025Q-6 GFR025Q-8 GFR025Q-10 GFR030Q-4 GFR030Q-6 GFR030Q-8 GFR030Q-10 GFR017Q-4 GFR017Q-6 GFR017Q-8 GFR017Q-10 GFR025Q-4 GFR025Q-6 GFR025Q-8 GFR025Q-10 GFR030Q-4 GFR030Q-6 GFR030Q-8 GFR030Q-10 5/16" SHNK DI.,.110 OFFSET, 2 ½" Oal 0.0335 0.0335 0.0335 0.0335 0.0385 0.0385 0.0385 0.0385 GFR033-4 GFR033-6 GFR033-8 GFR033-12 GFR038-4 GFR038-6 GFR038-8 GFR038-12 GFR033-4 GFR033-6 GFR033-8 GFR033-12 GFR038-4 GFR038-6 GFR038-8 GFR038-12 MX WIDTH UNOTED TiLN 3/8" SHNK DI.,.110 OFFSET, 2 ½" Oal 0.047 0.047 0.047 0.047 0.047 0.047 0.056 0.056 0.056 0.056 0.056 0.056 0.088 0.088 0.088 0.088 0.088 0.088 GFR039-4 GFR039-6 GFR039-8 GFR039-12 GFR039-16 GFR039-20 GFR046-4 GFR046-6 GFR046-8 GFR046-12 GFR046-16 GFR046-20 GFR055-4 GFR055-6 GFR055-8 GFR055-12 GFR055-16 GFR055-20 GFR062-4 GFR062-6 GFR062-8 GFR062-12 GFR062-16 GFR062-20 GFR069-4 GFR069-6 GFR069-8 GFR069-12 GFR069-16 GFR069-20 GFR087-4 GFR087-6 GFR087-8 GFR087-12 GFR087-16 GFR087-20 GFR039-4 GFR039-6 GFR039-8 GFR039-12 GFR039-16 GFR039-20 GFR046-4 GFR046-6 GFR046-8 GFR046-12 GFR046-16 GFR046-20 GFR055-4 GFR055-6 GFR055-8 GFR055-12 GFR055-16 GFR055-20 GFR062-4 GFR062-6 GFR062-8 GFR062-12 GFR062-16 GFR062-20 GFR069-4 GFR069-6 GFR069-8 GFR069-12 GFR069-16 GFR069-20 GFR087-4 GFR087-6 GFR087-8 GFR087-12 GFR087-16 GFR087-20 MX WIDTH UNOTED TiLN 3/8" SHNK DI.,.110 OFFSET, 2 ½" Oal GFR124-6 GFR124-8 GFR124-12 GFR124-16 GFR124-20 1/2" SHNK DI.,.160 OFFSET, 3" Oal 0.157 0.157 0.157 0.157 0.157 0.188 0.188 0.188 0.188 0.188 0.251 0.251 0.251 0.251 0.251 GFR093-8 GFR093-12 GFR093-16 GFR093-20 GFR093-24 GFR125-8 GFR125-12 GFR125-16 GFR125-20 GFR125-24 GFR156-8 GFR156-12 GFR156-16 GFR156-20 GFR156-24 GFR187-8 GFR187-12 GFR187-16 GFR187-20 GFR187-24 GFR250-8 GFR250-12 GFR250-16 GFR250-20 GFR250-24 HOLDERS - SEE PGE 15 Groove tools - O-Ring - solid carbide GFR124-6 GFR124-8 GFR124-12 GFR124-16 GFR124-20 GFR093-8 GFR093-12 GFR093-16 GFR093-20 GFR093-24 GFR125-8 GFR125-12 GFR125-16 GFR125-20 GFR125-24 GFR156-8 GFR156-12 GFR156-16 GFR156-20 GFR156-24 GFR187-8 GFR187-12 GFR187-16 GFR187-20 GFR187-24 GFR250-8 GFR250-12 GFR250-16 GFR250-20 GFR250-24 MX GROOVE WIDTH RDIUS UNOTED 1/4" SHNK DI.,.110 OFFSET, 2 ½" OL 0.562 0.097 0.142 0.145 GOR096-8 GOR141-9 GOR144-10 TiLN GOR096-8 GOR141-9 GOR144-10 MX GROOVE WIDTH RDIUS UNOTED 3/8" SHNK DI.,.125 OFFSET, 2 ½" OL 0.812 0.937 0.175 0.209 0.242 GOR174-12 GOR208-13 GOR241-15 TiLN GOR174-12 GOR208-13 GOR241-15 Stocked: TiLN = ; Optional: TiN =, TiN = N 28
undercut GROOVE S - SOLID RIDE Undercut Groove Tools MX WIDTH UNOTED TiLN 1/4" SHNK DI., OFFSET, 2 ½" Oal 0.031 0.031 U25030-8 U25030-16 U25030-8 U25030-16 5/16" SHNK DI., OFFSET, 2 ½" Oal 0.310 0.310 0.310 0.310 0.051 0.051 U31050-8 U31050-16 U31062-16 U31062-20 3/8" SHNK DI., OFFSET, 2 ½" Oal U37062-16 U37062-20 U37093-16 U37093-20 U37125-16 U37125-20 1/2" SHNK DI., OFFSET, 3" Oal U50062-16 U50062-24 U50093-16 U50093-24 U50125-16 U50125-24 U31050-8 U31050-16 U31062-16 U31062-20 U37062-16 U37062-20 U37093-16 U37093-20 U37125-16 U37125-20 U50062-16 U50062-24 U50093-16 U50093-24 U50125-16 U50125-24 Undercut & Profile Groove Tools MX WIDTH UNOTED TiLN 1/4" SHNK DI., OFFSET, 2 ½" Oal 0.031 0.031 UP25030-8 UP25030-16 UP25030-8 UP25030-16 5/16" SHNK DI., OFFSET, 2 ½" Oal 0.310 0.310 0.310 0.310 0.051 0.051 UP31050-8 UP31050-16 UP31062-16 UP31062-20 3/8" SHNK DI., OFFSET, 2 ½" Oal UP37062-16 UP37062-20 UP37093-16 UP37093-20 UP37125-16 UP37125-20 1/2" SHNK DI., OFFSET, 3" Oal UP50062-16 UP50062-24 UP50093-16 UP50093-24 UP50125-16 UP50125-24 UP31050-8 UP31050-16 UP31062-16 UP31062-20 UP37062-16 UP37062-20 UP37093-16 UP37093-20 UP37125-16 UP37125-20 UP50062-16 UP50062-24 UP50093-16 UP50093-24 UP50125-16 UP50125-24 FE GROOVE S - SOLID RIDE GROOVE WIDTH GROOVE. DI. UNOTED 1/8" SHNK DI., 1 ½" Oal 0.135 0.135 0.135 0.135 FG125-015 FG125-020 FG125-025 FG125-030 3/16" SHNK DI., 2" Oal 0.195 0.195 0.195 0.195 FG187-035 FG187-040 FG187-045 FG187-050 1/4" SHNK DI., 2 ½" Oal 0.021 0.031 0.041 0.051 0.260 0.260 0.260 0.260 FG250-020 FG250-030 FG250-040 FG250-050 TiLN FG125-015 FG125-020 FG125-025 FG125-030 FG187-035 FG187-040 FG187-045 FG187-050 FG250-020 FG250-030 FG250-040 FG250-050 GROOVE WIDTH GROOVE. DI. UNOTED 5/16" SHNK DI., 2 ½" Oal 0.031 0.041 0.051 0.130 FG312-030 FG312-040 FG312-050 FG312-062 3/8" SHNK DI., 2 ½" Oal 0.031 0.130 0.190 0.385 0.385 0.385 0.385 1/2" SHNK DI., 3" Oal 0.157 0.130 0.190 0.310 0.510 0.510 0.510 0.510 FG375-030 FG375-062 FG375-093 FG375-125 FG500-062 FG500-093 FG500-125 FG500-156 TiLN FG312-030 FG312-040 FG312-050 FG312-062 FG375-030 FG375-062 FG375-093 FG375-125 FG500-062 FG500-093 FG500-125 FG500-156 GROOVE WIDTH GROOVE. DI. UNOTED 5/8" SHNK DI., 3 ½" Oal 0.157 0.188 0.130 0.190 0.310 0.635 0.635 0.635 0.635 0.635 3/4" SHNK DI., 4" Oal 0.157 0.188 0.251 0.130 0.190 0.310 0.760 0.760 0.760 0.760 0.760 0.760 FG625-062 FG625-093 FG625-125 FG625-156 FG625-187 FG750-062 FG750-093 FG750-125 FG750-156 FG750-187 FG750-250 HOLDERS - SEE PGE 15 TiLN FG625-062 FG625-093 FG625-125 FG625-156 FG625-187 FG750-062 FG750-093 FG750-125 FG750-156 FG750-187 FG750-250 single point S Stocked: TiLN = ; Optional: TiN =, TiN = N 29
TPERED PIPE REMERs (NPT) - carbide tipped D F L S OL THRED 0.409 0.543 0.670 0.347 0.586 0.725 0.470 0.655 0.690 0.875 0.875 2.60 2.91 3.44 3.88 1/8-27NPT 1/4-18NPT 3/8-18NPT 1/2-14NPT PRSS-01 PRSS-02 PRSS-03 PRSS-04 0.882 1.107 1.448 0.937 1.173 1.518 0.875 1.060 1.125 1.875 4.62 5.06 5.62 3/4-14NPT 1-11.5NPT 1¼-11.5NPT PRSS-05 PRSS-06 PRSS-07 1.687 2.154 2.561 3.180 1.757 2.230 2.670 3.296 1.125 1.220 1.750 1.875 1.750 0 0 0 5 2.625 3.125 3.750 5.88 6.22 6.75 6.88 1½-11.5NPT 2-11.5NPT 2½-8NPT 3-8NPT PRSS-08 PRSS-09 PRSS-10 PRSS-11 RITISH standard PRLLEL PIPE - PORT carbide tipped D F J L R S Q OL THRED 0.398 0.533 0.671 0.840 0.719 0.938 1.063 0.565 0.683 0.683 0.801 0.345 0.459 0.597 0.741 0.105 3.62 3.62 3.62 3.62 1/8 SPP 1/4 SPP 3/8 SPP 1/2 SPP PT-SPP-1/8 PT-SPP-1/4 PT-SPP-3/8 PT-SPP-1/2 1.055 1.325 1.665 1.897 1.875 2.313 2.563 0.880 0.998 1.078 1.078 0.958 1.201 1.541 1.774 4.12 4.12 4.12 4.38 3/4 SPP 1.0 SPP 1 ¼ SPP 1 ½ SPP PT-SPP-3/4 PT-SPP-1.0 PT-SPP-1 1/4 PT-SPP-1 1/2 port tools 30
ms16142 (saej1926) (saej514) O-ring boss Solid Pilot - carbide tipped K D E F P J L S OL TUE THRED 12 12 12 12 5 0.4235 0.4895 0.5525 0.082 0.082 0.101 0.101 0.682 0.760 0.838 0.916 0.270 0.331 0.385 0.448 0.430 0.470 0.520 0.560 3.12 3.12 0.188 5-24UNF-2 0-24UNF-2 0.4375-20UNF-2 0-20UNF-2 MS16142-2S MS16142-3S MS16142-4S MS16142-5S 12 0.6185 0.8135 0.9445 1.1505 0.105 0.108 0.108 0.138 0.979 1.198 1.354 1.635 0.504 0.685 0.801 0.975 0.660 3.57 3.66 3.75 0.5625-18UNF-2 0-16UNF-2 0.8750-14UNF-2 1.0625-12UN-2 MS16142-6S MS16142-8S MS16142-10S MS16142-12S 1.2755 1.4005 1.7155 1.9645 2.5895 0.138 0.138 1.775 1.920 2.280 2.570 3.490 1.101 1.225 1.537 1.787 2.412 0.850 0.950 4.00 4.05 4.20 4.20 4.60 0.875 0 1.1875-12UN-2 1.3125-12UN-2 1.6250-12UN-2 1.8750-12UN-2 00-12UN-2 MS16142-14S MS16142-16S MS16142-20S MS16142-24S MS16142-32S ms16142 (saej1926) (saej514) O-ring boss REMER Pilot - carbide tipped K D E F R J L S Q OL TUE THRED TiN 12 12 12 12 5 0.4235 0.4895 0.5525 0.082 0.082 0.101 0.101 0.682 0.760 0.838 0.916 0.271 0.333 0.388 0.479 0.479 0.558 0.558 1.75 1.75 0.032 3.12 3.12 0.188 5-24UNF-2 0-24UNF-2 0.4375-20UNF-2 0-20UNF-2 MS16142-2R MS16142-3R MS16142-4R MS16142-5R MS16142-2R MS16142-3R MS16142-4R MS16142-5R 12 0.6185 0.8135 0.9445 1.1505 0.105 0.108 0.108 0.138 0.979 1.198 1.354 1.635 0.507 0.688 0.804 0.979 0.620 0.699 0.792 0.917 3.38 3.70 3.80 3.94 0.5625-18UNF-2 0-16UNF-2 0.8750-14UNF-2 1.0625-12UN-2 MS16142-6R MS16142-8R MS16142-10R MS16142-12R MS16142-6R MS16142-8R MS16142-10R MS16142-12R 1.2755 1.4005 1.7155 1.9645 2.5895 0.138 0.138 1.775 1.920 2.280 2.570 3.490 1.104 1.229 1.542 1.792 2.417 0.917 0.917 0.917 0.917 0.917 0.095 0.095 0.095 4.21 4.25 4.35 4.35 5.15 0.875 0 1.1875-12UN-2 1.3125-12UN-2 1.6250-12UN-2 1.8750-12UN-2 00-12UN-2 MS16142-14R MS16142-16R MS16142-20R MS16142-24R MS16142-32R MS16142-14R MS16142-16R MS16142-20R MS16142-24R MS16142-32R 31 port tools
32 K (deg) D (mm) E (mm) F (mm) R (mm) J (mm) Q (inch) L (inch) S (inch) OL (inch) THRED 12 12 9.15 11.15 13.85 15.85 17.85 19.85 21.85 23.85 29.45 35.45 44.45 50.45 62.45 1.8 1.8 2.6 2.6 2.6 2.6 2.6 2.6 3.3 3.3 3.3 3.3 3.3 14.1 16.1 19.1 21.1 24.1 26.1 27.1 29.1 34.1 43.1 52.1 57.1 67.1 7.0 9.0 10.5 12.5 14.5 16.5 18.5 20.5 25.0 31.0 40.0 46.0 58.0 11.6 11.6 14.1 14.1 15.6 17.1 17.5 18.1 22.1 22.1 22.6 25.1 27.6 0.032 0.095 0.095 1.75 1.75 3.12 3.38 3.38 3.70 3.75 3.80 3.94 4.25 4.35 4.35 4.35 M8X1 M10X1 M12X1.5 M14X1.5 M16X1.5 M18X1.5 M20X1.5 M22X1.5 M27X2.0 M33X2.0 M42X2.0 M48X2.0 M60X2.0 6149-M8X1 6149-M10X1 6149-M12X1.5 6149-M14X1.5 6149-M16X1.5 6149-M18X1.5 6149-M20X1.5 6149-M22X1.5 6149-M27X2.0 6149-M33X2.0 6149-M42X2.0 6149-M48X2.0 6149-M60X2.0 K (deg) D (mm) E (mm) F (mm) R (mm) J (mm) Q (inch) L (inch) S (inch) OL (inch) THRED 12 12 9.15 11.15 13.85 15.85 17.85 19.85 21.85 23.85 29.45 35.45 44.45 50.45 62.45 1.8 1.8 2.6 2.6 2.6 2.6 2.6 2.6 3.3 3.3 3.3 3.3 3.3 17.1 20.1 23.1 25.1 28.1 30.1 32.1 34.1 40.1 49.1 60.1 66.1 76.1 7.0 9.0 10.5 12.5 14.5 16.5 18.5 20.5 25.0 31.0 40.0 46.0 58.0 11.6 11.6 14.1 14.1 15.6 17.1 17.5 18.1 22.1 22.1 22.6 25.1 27.6 0.032 0.095 0.095 1.75 1.75 3.12 3.38 3.38 3.70 3.75 3.80 3.94 4.25 4.35 4.35 4.35 M8X1 M10X1 M12X1.5 M14X1.5 M16X1.5 M18X1.5 M20X1.5 M22X1.5 M27X2.0 M33X2.0 M42X2.0 M48X2.0 M60X2.0 6149-M8X1-ID 6149-M10X1-ID 6149-M12X1.5-ID 6149-M14X1.5-ID 6149-M16X1.5-ID 6149-M18X1.5-ID 6149-M20X1.5-ID 6149-M22X1.5-ID 6149-M27X2.0-ID 6149-M33X2.0-ID 6149-M42X2.0-ID 6149-M48X2.0-ID 6149-M60X2.0-ID ISO6149-1 (saej2244-1) metric Port Tool carbide tipped ISO6149-1 (saej2244-1) metric Port Tool WITH ID NOTH - carbide tipped port tools
33 ms33649 (S5202) - SOLID PILOT port tool carbide tipped D E F J L P S OL TUE THRED 0.367 0.446 0.508 0.570 0.633 0.696 0.758 0.883 0.946 1.008 1.164 1.242 1.370 1.495 1.808 2.058 2.433 2.683 0.2665 0.3305 0.3925 0.4565 0.5195 0.5825 0.6455 0.7715 0.8345 0.8985 1.0255 1.0885 1.2135 1.3385 1.6505 1.9005 2.2755 2.5265 0.071 0.071 0.071 0.083 0.083 0.091 0.102 0.102 0.115 0.115 0.575 0.742 0.805 0.888 0.950 1.012 1.105 1.240 1.300 1.415 1.602 1.665 1.790 1.965 2.310 2.628 3.050 3.520 0.390 0.430 0.470 0.520 0.560 0.660 0.850 0.950 0.950 0.217 0.274 0.337 0.392 0.454 0.511 0.574 0.692 0.755 0.809 0.923 0.983 1.110 1.233 1.547 1.797 2.172 2.422 3.12 3.12 3.57 3.61 3.66 3.75 3.80 4.00 4.05 4.20 4.20 4.50 4.60 0.188 0.438 0.562 0.688 0.875 1.750 0 0-28UNJF-3 5-24UNJF-3 0-24UNJF-3 0.4375-20UNJF-3 0-20UNJF-3 0.5625-18UNJF-3 0-18UNJF-3 0-16UNJF-3 0.8125-16UNJ-3 0.8750-14UNJF-3 0-12UNJF-3 1.0625-12UNJ-3 1.1875-12UNJ-3 1.3125-12UNJ-3 1.6250-12UNJ-3 1.8750-12UNJ-3 00-12UNJ-3 00-12UNJ-3 MS33649-1S MS33649-2S MS33649-3S MS33649-4S MS33649-5S MS33649-6S MS33649-7S MS33649-8S MS33649-9S MS33649-10S MS33649-11S MS33649-12S MS33649-14S MS33649-16S MS33649-20S MS33649-24S MS33649-28S MS33649-32S D E F J L Q R S OL TUE THRED 0.367 0.446 0.508 0.570 0.633 0.696 0.758 0.883 0.946 1.008 1.164 1.242 1.370 1.495 1.683 1.808 2.058 2.433 2.683 0.2665 0.3305 0.3925 0.4565 0.5195 0.5825 0.6455 0.7715 0.8345 0.8985 1.0255 1.0885 1.2135 1.3385 1.5265 1.6505 1.9005 2.2755 2.5265 0.071 0.071 0.071 0.083 0.083 0.091 0.102 0.102 0.115 0.115 0.575 0.742 0.805 0.888 0.950 1.012 1.105 1.240 1.300 1.415 1.665 1.790 1.965 2.090 2.310 2.628 3.050 3.520 0.425 0.610 0.610 0.675 0.675 0.730 0.745 0.855 0.875 0.950 1.080 1.080 1.080 1.080 1.130 1.130 1.140 1.270 1.400 1.75 1.75 1.75 0.032 0.095 0.095 0.095 0.219 0.276 0.339 0.393 0.455 0.513 0.575 0.693 0.758 0.810 0.925 0.985 1.112 1.235 1.425 1.549 1.799 2.174 2.424 3.12 3.12 3.38 3.38 3.84 3.84 3.94 4.12 4.12 4.37 4.37 4.53 4.54 4.54 4.92 5.15 0.188 0.438 0.562 0.688 0.875 1.125 1.750 0 0-28UNJF-3 5-24UNJF-3 0-24UNJF-3 0.4375-20UNJF-3 0-20UNJF-3 0.5625-18UNJF-3 0-18UNJF-3 0-16UNJF-3 0.8125-16UNJ-3 0.8750-14UNJF-3 0-12UNJF-3 1.0625-12UNJ-3 1.1875-12UNJ-3 1.3125-12UNJ-3 0-12UNJF-3 1.6250-12UNJ-3 1.8750-12UNJ-3 00-12UNJ-3 00-12UNJ-3 MS33649-1R MS33649-2R MS33649-3R MS33649-4R MS33649-5R MS33649-6R MS33649-7R MS33649-8R MS33649-9R MS33649-10R MS33649-11R MS33649-12R MS33649-14R MS33649-16R MS33649-18R MS33649-20R MS33649-24R MS33649-28R MS33649-32R ms33649 (S5202) - REMER PILOT port tool carbide tipped port tools
and10050 - Solid Pilot port tool carbide tipped D E F J L P S OL TUE THRED 0.446 0.508 0.570 0.633 0.3305 0.3925 0.4565 0.5195 0.071 0.071 0.083 0.083 0.742 0.805 0.888 0.950 0.430 0.470 0.520 0.560 0.270 0.331 0.385 0.448 3.12 3.12 0.188 5-24UNF-3 0-24UNF-3 0.4375-20UNF-3 0-20UNF-3 ND10050-2S ND10050-3S ND10050-4S ND10050-5S 0.696 0.883 1.008 1.242 0.5825 0.7715 0.8985 1.0885 0.091 0.102 0.115 1.012 1.240 1.415 1.665 0.660 0.504 0.685 0.801 0.975 3.57 3.66 3.75 0.5625-18UNF-3 0-16UNF-3 0.8750-14UNF-3 1.0625-12UN-3 ND10050-6S ND10050-8S ND10050-10S ND10050-12S 1.495 1.808 2.058 2.433 2.683 1.3385 1.6505 1.9005 2.2755 2.5265 1.965 2.310 2.628 3.050 3.520 0.850 0.950 0.950 1.225 1.537 1.787 2.162 2.412 4.05 4.20 4.20 4.50 4.60 1.750 0 1.3125-12UN-3 1.6250-12UN-3 1.8750-12UN-3 00-12UN-3 00-12UN-3 ND10050-16S ND10050-20S ND10050-24S ND10050-28S ND10050-32S and10050 - Reamer Pilot port tool carbide tipped D E F J L R Q S OL TUE THRED 0.446 0.508 0.570 0.633 0.3305 0.3925 0.4565 0.5195 0.071 0.071 0.083 0.083 0.742 0.805 0.888 0.950 0.515 0.515 0.610 0.610 1.75 1.75 0.271 0.333 0.386 0.449 0.032 3.12 3.12 0.188 5-24UNF-3 0-24UNF-3 0.4375-20UNF-3 0-20UNF-3 ND10050-2R ND10050-3R ND10050-4R ND10050-5R 0.696 0.883 1.008 1.242 0.5825 0.7715 0.8985 1.0885 0.091 0.102 0.115 1.012 1.240 1.415 1.665 0.630 0.735 0.805 0.925 0.506 0.686 0.802 0.976 3.38 3.70 3.80 3.94 0.5625-18UNF-3 0-16UNF-3 0.8750-14UNF-3 1.0625-12UN-3 ND10050-6R ND10050-8R ND10050-10R ND10050-12R port tools 34 1.495 1.808 2.058 2.433 2.683 1.3385 1.6505 1.9005 2.2755 2.5265 1.965 2.310 2.628 3.050 3.520 0.955 1.140 1.260 1.390 1.226 1.538 1.788 2.163 2.413 0.095 0.095 0.095 4.25 4.35 4.54 4.92 5.15 1.750 0 1.3125-12UN-3 1.6250-12UN-3 1.8750-12UN-3 00-12UN-3 00-12UN-3 ND10050-16R ND10050-20R ND10050-24R ND10050-28R ND10050-32R
MS33514 (S33514) - PORT - RIDE TIPPED D F H J L P S X OL TUE THRED 0.163 0.234 0.293 0.356 0.137 0.198 0.263 0.326 0.410 0.470 0.188 0.234 0.234 0.380 0.440 0.440 0.480 0.091 0.123 0.185 0.232 0.128 0.158 0.174 0.190 0.188 5-24UNJF-3 0-24UNJF-3 0.4375-20UNJF-3 0-20UNJF-3 MS33514-2 MS33514-3 MS33514-4 MS33514-5 0.416 0.560 0.686 0.810 0.388 0.516 0.643 0.768 0.530 0.690 0.830 0.305 0.480 0.640 0.740 0.790 0.295 0.420 0.498 0.654 0.193 0.210 0.255 0.253 3.15 3.23 0.5625-18UNJF-3 0-16UNJF-3 0.8750-14UNJF-3 1.0625-12UNJ-3 MS33514-6 MS33514-8 MS33514-10 MS33514-12 1.062 1.316 1.565 2.068 1.018 1.272 1.522 2.024 1.560 1.800 2.400 0.415 0.415 0.485 0.485 0.940 0.950 0.950 1.060 0.873 1.091 1.342 1.811 0.322 0.325 0.390 0.395 3.50 3.62 3.82 4.09 0 1.3125-12UNJ-3 1.6250-12UNJ-3 1.8750-12UNJ-3 00-12UNJ-3 MS33514-16 MS33514-20 MS33514-24 MS33514-32 RPT (S1300) (PS10035) - Rosan avity PORT carbide tipped D E F G J L R S SF OL TUE THRED 0.255 0.287 0.340 0.093 0.093 0.093 0.1555 0.1555 0.1555 0.2985 0.2985 0.2985 0.610 0.670 0.184 0.218 0.275 0.382 0.449 0.496 4.00 4.00 4.00 0.188 0.2160-28UNJF 0-28UNJF 5-24UNJF RPT-2 RPT-3 RPT-4 0.402 0.465 0.583 0.093 0.108 0.108 0.1555 5 5 0.2985 0.3135 0.3135 0.725 0.785 0.850 0.337 0.392 0.511 0.602 0.676 0.785 3.48 3.53 3.85 0-24UNJF 0.4375-20UNJF 0.5625-18UNJF RPT-5 RPT-6 RPT-8 0.726 1.163 1.388 0.108 0.108 0.108 0.135 5 5 5 0.1975 0.3135 0.3455 0.3455 0.3775 0.810 0.950 1.015 1.020 0.650 0.767 1.073 1.261 1.016 1.140 1.428 1.751 3.81 4.20 4.26 4.52 0.6875-24UNJEF 0.8125-20UNJEF 1.1250-18UNJEF 1.3125-18UNJEF RPT-10 RPT-12 RPT-16 RPT-20 35 port tools
HYDRFORE RTRIDGE VLVE S - RIDE TIPPED TWO WY VITY D1 D2 D3 D4 L1 L2 L3 OL S SL 15º 15º 15º 15º 1.188 1.188 1.750 0.813 0.945 1.150 1.401 0.688 0.812 0.977 1.229 0.501 0.626 0.876 1.127 0.108 0.108 0.138 0.138 0.932 1.400 1.344 1.156 1.312 1.920 1.844 4.00 4.25 5.25 5.25 V08-2 V10-2 V12-2 V16-2 THREE WY VITY D1 D2 D3 D4 D5 L1 L2 L3 L4 OL S SL 15º 15º 15º 15º 1.188 1.188 1.750 0.813 0.945 1.150 1.401 0.688 0.812 0.975 1.234 0.626 0.689 0.938 1.127 0.563 0.626 0.876 1.064 0.108 0.108 0.108 0.138 0.718 0.860 1.400 1.344 1.270 2.370 2.469 1.703 1.875 2.890 2.968 5.00 5.00 6.25 6.25 V08-3 V10-3 V12-3 V16-3 FOUR WY VITY D1 D2 D3 D4 D5 D6 L1 L2 L3 L4 L5 OL S SL 15º 15º 15º 15º 1.188 1.188 1.750 0.813 0.945 1.150 1.401 0.688 0.812 0.975 1.234 0.626 0.751 0.938 1.127 0.563 0.689 0.876 1.064 0.501 0.626 0.813 1.002 0.108 0.108 0.138 0.138 0.718 0.870 1.400 1.344 1.270 2.370 2.469 1.830 5 3.330 3.594 2.210 0 3.860 4.094 5.50 5.50 7.00 7.25 V08-4 V10-4 V12-4 V16-4 port tools 36
ms21921 - Port tool - carbide tipped D1 D2 D3 D4 L1 L2 S SL OL TUE THRED 0.475 0.328 0.391 0.453 0.277 0.338 0.393 0.173 0.234 0.302 0.425 0.429 0.547 0.570 0.760 1.75 5-24UNJF-3 0-24UNJF-3 0.4375-20UNJF-3 MS21921-2 MS21921-3 MS21921-4 0.675 0.516 0.578 0.766 0.455 0.513 0.693 0.368 0.427 0.554 0.562 0.578 0.609 0.840 1.75 1.75 1.75 3.50 0-20UNJF-3 0.5625-18UNJF-3 0-16UNJF-3 MS21921-5 MS21921-6 MS21921-8 1.050 1.300 1.550 0.891 1.078 1.328 0.810 0.987 1.236 0.692 0.828 1.076 0.687 0.687 0.687 1.020 1.040 1.090 2.13 3.75 4.00 4.25 0.8750-14UNJF-3 1.0625-12UNJF-3 1.3125-12UNJF-3 MS21921-10 MS21921-12 MS21921-16 D2036 - Port tool - carbide tipped D1 D2 D3 D4 D5 D6 D7 L2 L3 L4 R1 S SL OL THRED 0.888 1.012 1.240 0.570 0.696 0.883 0.4565 0.5825 0.7715 0.393 0.513 0.693 0.387 0.507 0.688 0.2945 0.4195 0.6110 0.280 0.425 0.545 0.480 0.505 0.605 0.971 1.004 1.144 2.13 4.00 4.00 4.25 0.4375-20UNJF-3 0.5625-18UNJF-3 0-18UNJF-3 D2036-4 D2036-6 D2036-8 1.415 1.665 1.965 1.008 1.242 1.495 0.8985 1.0885 1.3385 0.810 0.985 1.235 0.804 0.980 1.230 0.7330 0.8610 1.1140 0.650 0.825 0.665 0.665 0.715 0.755 1.215 1.287 1.392 2.13 2.13 2.13 4.50 4.50 4.50 0.8750-14UNJF-3 1.0625-12UNJF-3 1.3125-16UNJF-3 D2036-10 D2036-12 D2036-16 37 port tools
ms33651 (ND10071) - Port tool - carbide tipped D1 D2 D3 L1 L2 S SL OL THRED 1.050 0.523 0.690-20UNF-3 MS33651 HRD TO FIND Port tools - call FOR VILILITY SUN HYDRULI U24 MS20819 OMMON VITY port tools 38 N818 MS21922