Frenchwood Gliding Patio Doors

Frenchwood 400 Frenchwood Naturally occurring variations in grain, color and texture make each wood door panel one-ofa-kind. These defining features create a character unattainable in vinyl, steel or aluminum products. CUSTOM SIZING! in 1/8 increments. SECTION REFERENCE Tables of Basic Sizes 132 Opening Specifications 133 Basic Unit Details 134 Joining Details 135 Sidelights & Transoms 154 Standard Divided Light Patterns 156 Art Glass Options 123 Combination Designs 231 Performance Data 247 Combining the beauty of traditional French Door styling with space-saving design, Frenchwood gliding patio doors ride smoothly and easily on stainless steel and precision ball bearing rollers. 129

Frenchwood Standard Features C Options FRAME A The sill of the Frenchwood gliding patio door has an extruded aluminum track, with a stainless steel cap that resists stain, rust and denting **. A thermal barrier reduces conductive heat loss and checks condensation on the inside. The sill has an attractive wear-repellent, F heat-baked finish in a neutral gray color. Standard frame depth is 4-9/16". B All basic exterior G frame members are covered with a rigid vinyl (PVC) sheath that maintains an attractive appearance while minimizing maintenance. Andersen Frenchwood gliding patio doors are available in four neutral colors. Specify White, Sandtone, Terratone or Forest Green color. C Wood frame members are treated with a water-repellent preservative for long-lasting ** protection and performance. Interior frame trim pieces are clear unfinished pine. Oak and maple veneer and prefinished white interior options are available. Factory-assembled doors are now available (2-panel doors) and arrive at the jobsite ready to install. Unassembled doors are also available and require jobsite assembly. I H E A D A flexible PVC weatherstrip on the side jambs, and a pile weatherstrip on the head, provide a positive seal between the frame and panels. PANEL E The exterior of the wood door panel is protected with a low-maintenance urethane base finish in White, Sandtone, Terratone or Forest Green color. F Panel interior surfaces are unfinished clear pine. Unfinished oak and maple veneers are available as options. Low-maintenance prefinished white interiors are also available on units with White exteriors. D B G Dual ball bearing rollers on door panels provide smooth gliding operation with selfcontained leveling adjusters. GLASS H Panels are silicone bed glazed and finished with an interior wood stop and an exterior silicone bead. I High-Performance Low-E4 tempered and High-Performance Low-E4 Sun tempered glass deliver optimum insulating performance. An invisible titanium dioxide coating on the exterior glass pane makes cleaning easier when it s activated by sunlight. A removable translucent film helps shield the glass from damage and simplifies finishing at the jobsite. (Glass option must be specified.) COLOR Exterior Color Specify a unit color option to complete your order: White, Sandtone, Terratone or Forest Green. Prefinished Interior Andersen 400 Series Frenchwood gliding patio doors with white exteriors are available with a prefinished white interior. Grilles are available with interior/exterior colors to match. Interior Veneer Available in pine, oak and maple. Interior veneer options can be specified with any exterior color. HARDWARE* Expanded Offering Andersen gliding patio doors are available with hardware from the Metro, Estate and Andiron hardware collections in a variety of styles and finishes. Mix-and-match style and finish options are available to get just the right look inside and out. See pages 4-5 for complete descriptions. PATTERNED GLASS Patterned glass options are available. See page 7 for more details. Unassembled Frenchwood gliding patio doors are available with Stormwatch protection. For a copy of the Andersen Coastal Product Guide, contact your Andersen supplier. Reachout Locking Hardware The unique Andersen reachout locking system pulls the door panel snugly into the jamb for weathertightness and enhanced security. Mortise-and-Tenon Joints Panel joints are mortise-and-tenon with patented dowel construction for maximum strength. ** For complete information on our limited warranties, visit andersenwindows.com or contact your Andersen supplier. Flexible Seal A patented full-length combination weatherstrip/ interlock system provides a flexible seal at the meeting stile. * Sold separately. Note: Andersen patio doors are not intended for use as entrance doors. Learn more online at andersenwindows.com 130

Accessories FRAME Extension s * Standard jamb depth is 4-9/16" (116). Pine, oak or maple veneer or white interior extension jambs are available for the following wall thicknesses: 5-1/4" (133) 6-9/16" (167) 7-1/8" (181) Threshold * An oak or maple threshold is available for finishing the interior of the sill on Frenchwood gliding patio doors. Ramped Insert * Provides smooth transition from interior to exterior. Can be used with retractable insect screen, but not gliding insect screen. (Specifier must check with local and federal officials to determine if product meets accessibility codes.) Support * An aluminum sill support is designed to lock into a channel under the sill and tie back into the wall. This will offer support to the outermost sill section when needed. Available in neutral gray finish. HARDWARE Exterior Keyed Lock * A six-pin key cylinder lock is available for all patio doors in styles and finishes that coordinate with hardware. This lock allows the patio door to be locked and unlocked from the exterior. Auxiliary Foot Lock * This gliding door panel auxiliary foot lock provides an extra measure of security when the door is in a locked position. Available in finishes that coordinate with hardware. INSECT SCREENS * Sold separately. ** For complete information on our limited warranties, visit andersenwindows.com or contact your Andersen supplier. Frank Lloyd Wright is a registered trademark of the Frank Lloyd Wright Foundation. Delrin is a registered trademark of E.I. dupont denemours and Company. Perma-Clean Gliding Insect Screen * Available for two- and fourpanel doors in White, Sandtone, Terratone or Forest Green color baked-on enamel finish. Patented square corner joint construction adds considerable strength to the frame members, and the long-lasting ** glass fiber screen cloth has a charcoal finish. Delrin injection molded bottom rollers with self-contained leveling adjusters provide smooth operation. Interior and exterior pulls and latch are provided. Perma-Clean Retractable Insect Screen * The retractable insect screen is installed on the exterior of the door and opens side-to-side across the width of the opening. When the insect screen is not in use, it neatly retracts into a small canister mounted on the exterior of the door. The retractable insect screen canister is available for two-panel patio doors in White, Sandtone, Terratone and Forest Green. Please note, retractable screen track reduces clear opening height by 1". GRILLES Divided Light Patterns * See page 156 for divided light patterns or visit andersenwindows.com/grilles. GLASS Andersen Art Glass Andersen art glass panels come in eleven original patterns, including four Frank Lloyd Wright series designs. See page 123 for complete details on Andersen art glass or visit andersenwindows.com/artglass for pattern information. TRANSOMS * Andersen Frenchwood Patio Door transoms feature elegant lines that match our 400 Series Frenchwood gliding patio doors. They feature pine, oak, maple or prefinished white interior options, plus our four standard exterior colors. Size information available on pages 154-155. SIDELIGHTS Stationary units can also be selected for use as sidelights. See size table on page 132 for size options. CAUTION: Painting and staining may cause damage to rigid vinyl. Products in Sandtone or Terratone color may be painted any color lighter than Terratone using quality oil-base or latex paint. Submit color samples to Andersen for approval when painting White. Submit color samples to Andersen for approval when painting Sandtone or Terratone any color darker than Terratone. Do not paint Forest Green exteriors. Creosote-based stains should not come in contact with Andersen products. Do not paint weatherstripping. Abrasive cleaners or solutions containing corrosive solvents should not be used on Andersen products. For vinyl painting instructions and preparation, contact your Andersen supplier. Andersen does not warrant the adhesion of paint to vinyl. For More Information See pages 1-11 for more about: Glass Options Grilles Hardware Installation Accessories 400 Frenchwood 131

Frenchwood Three Basic Unit Heights Custom Sizes 1/8" increments (2019) 6'-7 1 /2" (2032) 6'-8" (1603) 63 1 /8" (2092) (2108) 6'-10 3 /8" 6'-11" 66" (1676) (2426) (2438) (2010) 7'-11 1 /2" 8'-0" 79 1 /8" 1 FWG xx68 2 FWG xx611 3 FWG xx80 1/8" increments Custom sizes available in 1/8" increments between the smallest and largest standard patio door sizes. Some restrictions apply. Contact your Andersen supplier for availability. Table of Basic Unit Sizes Scale 1/8" = 1'-0" (1:96) Exterior views shown. Arrow indicates direction of panel. Unit Dimension Minimum Rough Opening Unobstructed Glass Available in 3 heights 2'-8" 4'-11 1 /4" 4'-11 1 /4" 9'-9" (813) (1505) (1505) (2972) 2'-8 3 /4" 5'-0" 5'-0" 9'-9 3 /4" (832) (1524) (1524) (2991) 21 1 /8" 21 1 /8" 21 1 /8" 21 1 /8" 21 1 /8" 21 1 /8" 21 1 /8" 21 1 /8" 21 1 /8" (537) (537) (537) (537) (537) (537) (537) (537) (537) AG 1 FWG 2968S 2 FWG 29611S 3 FWG 2980S FWG 5068L FWG 50611L FWG 5080L FWG 5068R FWG 50611R FWG 5080R + 1 /4" to rough opg. FWG 10068-4 * FWG 100611-4 * FWG 10080-4 * Grille order number: FWG2668 FWG2680 FWG26611 Factory Assembled Patio Doors Two-panel units are now available factory assembled and arrive at the jobsite ready to install. (Stormwatch products are not available factory assembled.) Divided Light Patterns for Patio Doors In addition to the Colonial grille patterns shown in the table of basic unit sizes, other standard divided light patterns are available. See page 156 or visit andersenwindows.com/grilles. Unit Dimension Minimum Rough Opening Unobstructed Glass 3'-2" 5'-11 1 /4" 5'-11 1 /4" 11'-9" (965) (1810) (1810) (3581) 3'-2 3 /4" 6'-0" 6'-0" 11'-9 3 /4" (984) (1829) (1829) (3600) 27 1 /8" 27 1 /8" 27 1 /8" 27 1 /8" 27 1 /8" 27 1 /8" 27 1 /8" 27 1 /8" 27 1 /8" (689) (689) (689) (689) (689) (689) (689) (689) (689) Available in 3 heights AG 1 FWG 3368S 2 FWG 33611S 3 FWG 3380S FWG 6068L FWG 60611L FWG 6080L FWG 6068R FWG 60611R FWG 6080R + 1 /4" to rough opg. FWG 12068-4 * FWG 120611-4 * FWG 12080-4 * Grille order number: FWG3068 FWG3080 FWG30611 Unit Dimension Minimum Rough Opening Unobstructed Glass 4'-2" 7'-11 1 /4" 7'-11 1 /4" 15'-9" (1270) (2419) (2419) (4801) 4'-2 3 /4" 8'-0" 8'- 0" 15'-9 3 /4" (1289) (2438) (2438) (4820) 39 1 /8" 39 1 /8" 39 1 /8" 39 1 /8" 39 1 /8" 39 1 /8" 39 1 /8" 39 1 /8" 39 1 /8" (994) (994) (994) (994) (994) (994) (994) (994) (994) Available in 3 heights AG 1 FWG 4368S 2 FWG 43611S 3 FWG 4380S FWG 8068L FWG 80611L FWG 8080L FWG 8068R FWG 80611R FWG 8080R + 1 /4" to rough opg. FWG 16068-4 * FWG 160611-4 * FWG 16080-4 * Grille order number: FWG4068 FWG4080 FWG40611 * Four-panel doors open without obstruction. AG: Andersen art glass panels are available for these sizes. Rough opening dimensions may need to be increased to allow for use of building wraps, flashing, sill panning, brackets, fasteners or other items. See page 12 for details. Unit Dimension always refers to outside frame to frame dimension. Dimensions in parentheses are in millimeters. S designates a stationary unit which can be used as an individual unit or a sidelight. Combinations of door units joined together may require horizontal or vertical reinforcement. This reinforcement should be specified by a professional engineer. When ordering, be sure to specify color desired: White, Sandtone, Terratone or Forest Green. 132

Frenchwood Gliding Door Opening Specifications Unit No. Clear Opg. Sq. Ft. (m 2 ) Clear Opening in Full Open Position Width Inches (mm) Height Inches (mm) Glass Sq. Ft. (m 2 ) Vent Sq. Ft. (m 2 ) Overall Unit Area Sq. Ft. (m 2 ) 2968 9.26 (.860) 17.67 (1.642) 3368 11.89 (1.105) 20.98 (1.949) 4368 17.15 (1.593) 27.60 (2.564) 5068 11.58 (1.076) 22 1 / 8 " (562) 75 3 / 8 " (1915) 18.52 (1.721) 11.58 (1.076) 32.71 (3.039) 6068 14.72 (1.368) 28 1 / 8 " (714) 75 3 / 8 " (1915) 23.78 (2.209) 14.72 (1.368) 39.34 (3.655) 8068 21.00 (1.951) 40 1 / 8 " (1019) 75 3 / 8 " (1915) 34.30 (3.187) 21.00 (1.951) 52.59 (4.886) 10068 23.42 (2.176) 44 3 / 4 " (1137) 75 3 / 8 " (1915) 37.04 (3.441) 23.42 (2.176) 64.59 (6.001) 12068 29.70 (2.759) 56 3 /4" (1441) 75 3 /8" (1915) 47.55 (4.418) 29.70 (2.759) 77.84 (7.232) 16068 42.27 (3.927) 80 3 / 4 " (2051) 75 3 / 8 " (1915) 68.60 (6.373) 42.27 (3.927) 104.34 (9.694) 29611 9.68 (.899) 18.31 (1.701) 33611 12.43 (1.155) 21.74 (2.020) 43611 17.93 (1.666) 28.60 (2.657) 50611 12.04 (1.119) 22 1 / 8 " (562) 78 3 / 16 " (1987) 19.36 (1.799) 12.04 (1.119) 33.89 (3.148) 60611 15.31 (1.422) 28 1 / 8 " (714) 78 3 / 16 " (1987) 24.86 (2.310) 15.31 (1.422) 40.76 (3.787) 80611 21.84 (2.029) 40 1 / 8 " (1019) 78 3 / 16 " (1987) 35.85 (3.331) 21.84 (2.029) 54.49 (5.062) 100611 24.36 (2.263) 44 3 / 4 " (1137) 78 3 / 16 " (1987) 38.72 (3.597) 24.36 (2.263) 66.93 (6.218) 120611 30.89 (2.870) 56 3 / 4 " (1441) 78 3 / 16 " (1987) 49.71 (4.618) 30.89 (2.870) 80.66 (7.494) 160611 43.95 (4.083) 80 3 / 4 " (2051) 78 3 / 16 " (1987) 71.71 (6.662) 43.95 (4.083) 108.12 (10.044) 2980 11.60 (1.078) 21.22 (1.971) 3380 14.90 (1.384) 25.20 (2.341) 4380 21.49 (1.996) 33.16 (3.081) 5080 14.04 (1.304) 22 1 / 8 " (562) 91 3 / 8 " (2321) 23.20 (2.155) 14.04 (1.304) 39.29 (3.650) 6080 17.85 (1.658) 28 1 / 8 " (714) 91 3 / 8 " (2321) 29.80 (2.769) 17.85 (1.658) 47.25 (4.390) 8080 25.46 (2.365) 40 1 / 8 " (1019) 91 3 / 8 " (2321) 42.98 (3.993) 25.46 (2.365) 63.17 (5.869) 10080 28.40 (2.638) 44 3 / 4 " (1137) 91 3 / 8 " (2321) 46.40 (4.311) 28.40 (2.638) 77.59 (7.208) 12080 36.01 (3.345) 56 3 / 4 " (1441) 91 3 / 8 " (2321) 59.60 (5.537) 36.01 (3.345) 93.51 (8.687) 16080 51.24 (4.760) 80 3 / 4 " (2051) 91 3 / 8 " (2321) 85.96 (7.986) 51.24 (4.760) 125.34 (11.644) 400 Frenchwood Clear Opening Dimensions Scale 1-1/2" = 1'-0" (1:8) Insect screen latch Clear Opening Height Clear Opening Width Insect screen Horizontal Section Two-Panel Door Vertical Section 1/4" (6) 1-13/16" (46) Passive Panel Astragal Clear Opening Width Insect screen Horizontal Section Four-Panel Door Light colored areas are basic parts furnished by Andersen. Dark colored areas are recommended Andersen parts to complete unit assembly and must be specifically ordered. 133

Frenchwood Basic Unit and Rough Opening Description Scale 1-1/2" = 1'-0" (1:8) Insect screen 5-13/16" (148) Minimum Rough Opening Height Unit Dimension Height 10-9/16" (268) Meeting Stile 4-9/16" (116) Width* 1-5/16" (33) Vertical Section Operating Door Andersen optional oak threshold 3/8" (10) 3-1/8" 3-1/8" 5-7/16" (138) (79) (79) 5-3/8" (137) Minimum Rough Opening Width Horizontal Section Two-Panel Operating Door 3/8" (10) 4-9/16" (116) Width* Left Hand Meeting Stile Astragal Right Hand Meeting Stile 1-5/16" (33) 5-3/8" (137) 3-1/8" (79) 3-1/8" (79) 4-5/8" (117) 4-5/8" 3-1/8" 3-1/8" (117) (79) (79) 5-3/8" (137) 3/8" (10) Minimum Rough Opening Width Horizontal Section Four-Panel Door 3/8" (10) Frenchwood Gliding Patio Door Center Line Astragal Dimensions 2'-5 5 /8" 2'-5 5 /8" 2'-5 5 /8" 2'-4 7 /8" 2'-4 7 /8" 2'-5 5 /8" 2'-11 5 /8" 2'-11 5 /8" 2'-11 5 /8" 2'-10 7 /8" 2'-10 7 /8" 2'-11 5 /8" 3'-11 5 /8" 3'-11 5 /8" 3'-11 5 /8" 3'-10 7 /8" 3'-10 7 /8" 3'-11 5 /8" (752) (752) (752) (733) (733) (752) (905) (905) (905) (886) (886) (905) (1210) (1210) (1210) (1191) (1191) (1210) 5'-0" WIDTHS 10'-0" WIDTHS 6'-0" WIDTHS 12'-0" WIDTHS 8'-0" WIDTHS 16'-0" WIDTHS * 4-9/16" measurement is from backside of anchoring flange to inside edge of door frame. Light colored areas are basic parts furnished by Andersen. Dark colored areas are recommended Andersen parts to complete unit assembly and must be specifically ordered. 134

Sidelight Details Scale 1-1/2" = 1'-0" (1:8) 1-5/16" (33) 4-9/16" (116) Width* 1" (25) 13/16" (21) 5-13/16" 4"(102) (148) 3/8" (10) 5-7/16" (138) 5-7/16" (138) Minimum Rough Opening Width 3/8" (10) 4-9/16" * (116)* 1-5/16" (33) 400 Frenchwood Horizontal Section Sidelight 10-9/16" (268) 1/4" (6) 1-13/16" (46) Vertical Section Sidelight Note: Gliding insect screen cannot be used with ramped sill. 8 1 5/16" (8) 1-7/16" (37) 1/4" (6) Vertical Section Ramped Joining Details Scale 1-1/2" = 1'-0" (1:8) 1/16" (1.5) 1-3/8 (35) 3/4" (19) 1-3/8 (35) 1-3/8" (35) 2" (51) Vertical support by others 1/16" (1.5) 3/4" (19) Optional Andersen filler and vinyl trim 2" (51) Non-Reinforced Mullion Overall : The sum of individual Unit Dimension Widths, plus 1/16" (1.5mm) for each unit joining. Overall Rough Opening Width: Add 3/4" (19) to Overall Unit Dimension Width. LVL Reinforced Mullion Overall : The sum of individual Unit Dimension Widths, plus 3/4" (19mm) for each unit joining. Overall Rough Opening Width: Add 3/4" (19mm) to Overall Unit Dimension Width. Support Mullion To meet structural requirements or to achieve a wider mull appearance, you can install units into separate rough openings using vertical supports (supplied by others) in combination with Andersen exterior filler and vinyl trim. Andersen recommends installation of doors into separate rough openings. Consult with an architect or structural engineer regarding minimum requirements for structural support members between adjacent door rough openings. 135

Frenchwood Suggested Product Applications Scale 1-1/2" = 1'-0" (1:8) Andersen optional extension jambs Unit Dimension Height Estate Collection, Newbury handle hardware Min. Rough Opg. Width Minimum Rough Opening Height Unit Dimension Height Metro Collection, Tribeca handle hardware Min. Rough Opg. Width Minimum Rough Opening Height Andersen optional retractable insect screen Andersen optional oak threshold Andersen optional gliding insect screen Andersen optional oak threshold Andersen optional metal sill support 3/4" (19) 2 x 6 Wood Frame Brick Veneer / 2" x 6" Wood Framing Rough openings may need to be increased to allow for the use of building wraps, flashings, sill panning, brackets, fasteners or other items. See page 12 for more details. CAUTION: In masonry wall construction provide a minimum of 1/2" clearance from the top of the brick or masonry to the bottom of any portion of the sill. Failure to do so could result in product damage. Fill the void with closed cell foam backer rod and silicone sealant. Be sure to allow for dimensional change of framework. Proper installation and maintenance of Andersen products is essential to attain optimum performance and operation. Written installation instructions which provide guidelines for proper installation are typically provided with Andersen products. They are also available from your local Andersen supplier or by visiting andersenwindows.com. Remember that every installation is different, and Andersen strongly recommends consultation with the local supplier or an experienced contractor, architect or structural engineer prior to the installation of any Andersen product. The method of attachment for Andersen products, fastener selection and code compliance is the responsibility of the architect, building owner, contractor, installer and/or consumer. For more complete installation details, refer to the Andersen Architectural Detail File or contact Andersen Corporation. 136