Sustainable New Zealand Timber Solutions www.sppnz.co.nz
ECOPINE PROFILED MOULDINGS OFFER NEW ZEALAND S MOST COMPREHENSIVE RANGE OF RE-MANUFACTURED TIMBER MOULDINGS AND JAMBS. ECOPINE moulding profiles offers New Zealand s most comprehensive range of re-manufactured timber mouldings and jambs. Available in finger-jointed or clears, ECOPINE covers a wide range of mouldings available in untreated, untreated primed, H3.1 treated, and H3.1 treated primed options to suit your individual requirements. With sawmilling operations at Stillwater, near Greymouth, Radiata and MDF moudling plants at Christchurch and Auckland, Southern Pine Products offers New Zealand s most comprehensive range of remanufactured timber products. This brochure should serve as a guide to our standard product range, however other profiles and products may be manufactured to order. BUILDING OR RENOVATING? TRUST YOU ARE MAKING THE RIGHT CHOICE FOR YOUR NEXT BUILDING PROJECT: Proudly manufactured in New Zealand. 0% FSC Certified. Available in untreated, untreated primed and H3.1 treated More choice ECOPINE mouldings and jambs come in a wide range of profiles to create your desired look. Buy a brand that you know and can trust Specify ECOPINE mouldings and jambs. 1
GENERAL INFORMATION 1. STORAGE All Southern Pine timber products both pre-painted and natural/raw, untreated and H3.1 treated must be stored in a dry environment, protected from moisture, direct sunlight and ecessive heat. In addition, mouldings, sarking and flooring profiles should be acclimatised to their surrounding environment for at least 4 hours prior to installation. 2. FIXING Mouldings can be nailed, glued or installed using a combination of both nails and adhesives. Nailing: for -mm thick profiles, fi using -50mm brads or panel pins. For -19mm thick profiles, fi using mm brads or panel pins. Adhesives: Mouldings can be glued using more commercial brands of adhesives. All joints should be mitre cut and glued during installation. For best results we recommend mouldings are installed using a combination of nailing and gluing. 3. FINISHING/PAINTING (INTERIOR) Un-painted Mouldings 1. Fill nail holes and any indentations with an interior filler and lightly sand smooth. 2. Apply one-coat of acrylic interior sealer or acrylic interior undercoat, allow to dry and sand smooth as required. 3. Apply 2-3 coats of premium water based enamel, lightly sanding after the first coat if required. Pre-painted Mouldings 1. Fill nail holes and indentations with an acrylic interior filler and lightly sand smooth. 2. Check the machine applied coating is smooth and even, lightly sand as required, and spot prime any bare areas. 3. Apply two coats of premium water based enamel lightly sanding between coats if required. NOTE: Always follow the paint manufacturers instructions on the paint can. For painting and staining eterior products please refer to the Southern Pine Weatherboard and Fascia brochure or the Timeline weatherboard brochure. MORE INFORMATION For more information about Southern Pine Products, our products, and recommended installation and finishing details, please contact us: Christchurch Auckland Ph: 03 349 9175 Ph: 09 573 044 Fa: 03 349 Fa: 09 573 0191 Website www.sppnz.co.nz EXTERIOR RANGE EAVES MOULD LINEA SILL.0 3.0 25.0 EM X EM 25X EM X27 SB 65X3 SB X3 SCRIBERS SCR 43X SCR X SCR X SCR X SCR 25X 2
ECOPINE MOULDINGS CHART TRADA CODE / SIZE CLEARS UT CLEARS H3.1 / H3.2 F/J UT F/J UT PP F/J H3.1 PP F/J H3.1/H3.2 #1 mm Quadrant #2 mm Quadrant #5 2mm Scotia #6 35mm Scotia #7 30 Bevelled Cornice # Bevelled Cornice #9 16mm Eternal Corner #9B 22mm Eternal Corner #11 mm Half Round # 30mm Half Round #13 43 Scriber #13B Scriber #15 25 Scriber #15B Scriber # Double Bevelled Arch. #19 Single Bevelled Arch. #20 Single Bevelled Arch. #20B Single Bevelled Arch. #21 Bullnose Arch. #22 Bullnose Arch. #22B Bullnose Arch. #23 Square Dressed #24 Square Dressed #24A Square Dressed Arrissed #25 24 Square Dressed #25A 20 Square Dressed #26 30 Square Dressed #27 Square Dressed #2 Square Dressed #29 Square Dressed #30 Square Dressed #31 Square Dressed #32 Single Bevelled Arch. Single Bevelled Arch. #32A 5 Single Bevelled Arch. Single Bevelled Arch. #33 Bullnose Arch. #33A 5 Bullnose Arch. #33B Marron Skirting #34 Splayed/Govt Arch. #35 5 Splayed/Govt Arch. Splayed/Govt Arch #37 mm Angle Fillet #37A 23mm Angle Fillet 6 Glazing Bead #3 Glazing Bead 30 Astrical Bead # 27 Eaves Mould 4532 Beazley Sill 653 Linea Sill 259 Cant Strip 259.5 Rustic Plug 7020 Dado Rail 4321 Picture Rail Melbourne Arch. 67 Melbourne Arch. 65 Lambs Tongue mm Bolection 30mm Bolection 45mm Colonial Scotia Colonial Arch. 5 Colonial Arch. Colonial Arch. 0 Colonial Skirting 67 Replica Arch. 5 Replica Arch. Replica Arch. 0 Replica Skirting Square Top Arch. 5 Square Top Arch. Square Top Arch. 3
MOULDINGS PROFILES BEVELLED ARCHITRAVE BULLNOSE ARCHITRAVE R11.5 º 5 R11.5 5 R11.5 BA BA BA BA DBA BA BA 5 BA BNA BNA BNA BNA BNA 5 SPLAYED ARCHITRAVE SQUARE TOP ARCHITRAVE MELBOURNE & LAMBS TONGUE ARCHITRAVE & MARON SKIRTING 37 5 92 2 17 19 MA MA SA SA 5 SA STA STA STA SCOTIA EXTERNAL CORNERS HALF ROUNDS 23 29 16 22 27 35 EC 16 EC 22 QUADRANT ANGLE FILLET BEVELLED CORNICE 23 27 15 39 SC 2 6 30 7 65 4 1 LT 65 MS HR HR 30 Q 25.5 Q AF 23 AF 2323 30 BC 30 BC 4
COLONIAL, REPLICA, AND PICTURE MOULDINGS COLONIAL ARCHITRAVE & SKIRTING REPLICA ARCHITRAVE & SKIRTING 0 0 17.9 35 67 54 5 0 5 9 3 CA CA 5 CS CS 0 RA 67 RA 5 RA RA 0 DADO RAIL BOLECTION PICTURE RAIL PICTURE MOULDINGS 20 70 DR 7020 BOL 30 BOL 30 16 21 43 PR 4321 PM29 20 PM5 3220 PM11 3525 PM37 37 PM26 4520 PM61 4525 PM6s 7020 SQUARE DRESSED MOULDINGS & HAND RAILS SD SD 20 SD 30 SD SD 24 SD 24 SD 2 4 SD SD HAND RAIL 0 6 65 HR1 0mm mm HR2 65mm mm 5
JOINERY PRODUCTS DOOR JAMBS DOOR STOP GLAZING BEADS DS 30 GB 6 GB AB 30 ROD & DOWEL GJ 114X30 FJ 92X SJ 92X Also available: GJ136 / GJ13625 GJ11430 / GJ13630 FJ1 / FJ115 SJ13630 / SJ130 Availabe in: 4.5mm / 6mm / mm / mm / mm 16mm / mm / 20mm / 22mm 25mm / 2mm / 30mm / 32mm 35mm / mm / 45mm / 50mm TGV/TGVF PROFILES PANELLING & FLOORING TGVF 9 3 3mm (45º) ARRI 19 6.5 19 6.5 T&G VJF 19 T&G VJF 19 PANELLING & FLOORING TGV 9 3.5 91 TGV 9 TGV 3.5 3.5 91 TGV 6
SPP SOUTHERN PINE PRODUCTS QUALITY PRODUCTS AVAILABLE Weatherboards Fascia Door Jambs Panelling Flooring Square Dressed Boards Clear Mouldings Finger Joint Mouldings Pre-finished Mouldings Rod & Dowel Handrails Laminated Boards Laminated Posts & Beams Cut-to-Length Mouldings and Boards www.sppnz.co.nz Christchurch Office P.O. Bo 16-200, Christchurch 025 635 Halswell Junction Rd, Halswell, ChCh 025 TEL: (03) 349 9175 FAX: (03) 349 sales@sppchch.co.nz Auckland Office Unit /99 Carbine Road Mt. Wellington, Auckland TEL: (09) 573 044 FAX: (09) 573 0191 sales@sppauck.co.nz