Grooved Panel Systems. Plankwall Euro-click All-Ali Display Accessories Slatbox

A Grooved Panel Systems Plankwall Euro-click All-Ali Display Accessories Slatbox

Grooved Panel Systems PAGE NO# A1... PLANKWALL A2... PLANKWALL Grooved Wall Panels A3... PLANKWALL Colour Selection A4... PLANKWALL Capping Sections A5... SYSTEMS 1 Panels & Gondolas A6... PLANKWALL Gondolas A7... PLANKWALL Gondolas A8... PLANKWALL All-Ali A9... ALL-ALI & UNI SLAT A10... CAPPING COMPONENTS A11... STORBOX & POPBOX A12... SHELF BOX A13... Shoe Shelves A14... Shoe Shelves A15... Display Bins / Info Holders A16... Shelf Brackets A17... Acrylic Shelves & Display Bins A18... Metal Shelves / Paper Shelves A19... Shelf Brackets A20... Shelving A21... Shelving A22... Display Prongs A23... Utility Hooks A24... Scanning Hooks / Trouser Displays A25... Clothing & Hat / Cap Displays A26... Metal Faceouts A27... Hangrail Brackets / Ticket Frames A28... Hangrails / Bag Faceouts A29... Wire Baskets / shelves A30... Accessory Displays A31... Spectacle Displays A32... Magazine / Card Displays A33... Office Trays / Golf Displays A34... Stationery / Video Displays A35... Brochure Holders A36... Wire Brochure Holders A37... Brochure Holder Systems

PLANKWALL Let us help you bring the pieces together! A1 1 2 3 4 A shop fit-out, whether it is a complete makeover or partial renovation is always a demanding time for the store owner/manager. With our large stock holding and huge product range, we can minimize the stress for you. On multi-store roll-outs, we can work with you to develop a supply system to ensure that your project comes together. We work with designers and architects to ensure that specified items are the best option and the products are available when required for the store opening. You can take advantage of our complete cutting service and have your wall panelling pre-cut according to your requested dimensions. This eliminates on-site mess and alleviates OH&S concerns as to dusty and manual handling issues.

A2 A1 PLANKWALL GROOVED WALL PANELS PLANKWALL Australia s favorite merchandising panel provides the ultimate solution for flexible merchandising of a wide range of products. Our huge range of display accessories simply hook in to the grooves and can be changed around just as simply. You get to select from accessories that hangsell, faceouts or side-hanging rails for clothing to shelving options through to industry specific displays such as golf equipment and office trays. PLANKWALL is stocked in a range of decorative colours to enhance your decor. In fact, we now stock it in 17 melamine colours (& silver acrylic mirror) that we have selected through years of experience to meet most of the needs of the modern retail market. PLANKWALL is manufactured from premium-grade 18mm thick MDF sourced from reputable suppliers with sustainable forestery management programmes. You get to select from a range of groove inserts that slides into the end of the panel - from aluminium inserts that provide maximum strength and quality appearance to coloured PVC inserts for a range of decorative effects. Standard panel size - 2400mm long x 1200 high. AP4020 - WHITE - Melamine both sides grooved one side. Panels are supplied standard with a half-groove on one edge. This allows for panels to be placed on top of one another with horizontal joins concealed by a standard groove insert. AP4011 - COLOURS - Melamine one side grooved one side. AP4021 - COLOURS - Melamine both sides grooved one side. ALUMINIUM T INSERT Slides into end of board. PVC L INSERT May be snapped into the groove from the front, after the panel is fixed to the wall. AP4255-2400mm (L) AP4260-2440mm (L) Colours available - White (WH), Black (BL), Grey (GY), Cream (CR) or Beech (BE). ALUMINIUM L INSERT Slides into end of board. AP4250-2400mm (L)

PLANKWALL COLOUR SELECTION A3 A1 WHITE PLANKED MAPLE BLACK CHALK BEECH QUARRYSTONE BUTTERMILK JARRAH LITE ALUMINIUM SILVER GREY WENGE BRIGHT RED FROST GREY MDF CLEARCOAT BRIGHT BLUE ARMOUR GREY MDF RAW BRIGHT YELLOW PLAIN MDF WHITE BEECH BLACK BRIGHT BLUE BRIGHT RED BRIGHT YELLOW ARMOUR GREY FROST GREY SILVER GREY CHALK CLEARCOAT PLANKED MAPLE JARRAH QUARRYSTONE LITE ALUMINIUM PLAIN PANELS FACED 2 SIDES 18mm AP9072 AP9074 BEE AP9074 BLA AP9074 BLU AP9074 RED AP9074 YEL AP9074 ARM AP9074 FGY AP9074 SIL AP9074 CHA AP9074 CLR AP9074 MAP AP9074 JAR AP9074 QUA AP9074 ALU AVAILABILITY CHART FACED 2 SIDES 25mm AP9082 AP9084 BEE AP9084 BLA AP9084 ARM AP9084 FGY AP9084 SIL AP9084 CHA AP9084 CLR AP9084 MAP AP9084 JAR AP9084 ALU FACED 1 SIDE GROOVED 1 SIDE* AP4001 AP4011 BEE AP4011 BLA AP4011 ARM AP4011 FGY AP4011 SIL AP4011 CHA AP4011 CLR AP4011 MAP AP4011 JAR AP4011 ALU PLANKWALL PANELS FACED 2 SIDE GROOVED 1 SIDE* AP4020 AP4021 BEE AP4021 BLA AP4021 BLU AP4021 RED AP4021 YEL AP4021 ARM AP4021 FGY AP4021 SIL AP4021 CHA AP4021 CLR AP4021 MAP AP4021 JAR AP4021 QUA AP4021 ALU FACED 2 SIDE GROOVED 2 SIDE** AP4081 AP4040 AP4041 BEE AP4041 BLA AP4041 BLU AP4041 RED AP4041 YEL AP4041 ARM AP4041 FGY AP4041 SIL AP4041 CHA AP4041 CLR AP4041 MAP AP4041 JAR AP4041 QUA AP4041 ALU BUTTERMILK AP9074 BUT AP4021 BUT AP4041 BUT WENGE ACRYLIC MIRROR AP9074 WEN AP4021 BU T AP4041 WEN AP4009 Ex Stock Available within 5 days * Plankwall panels are stocked with grooves at 100mm between centres 111 /2 grooves. Other groove spacings are available to special order - lead time 5 days. All grooved 1 side panels have 1 x 1 /2 groove along top of sheet. Grooved 2 side panels have 23 ** grooves with no 1 /2 grooves.

A1 A4 PLANKWALL CAPPING SECTIONS ALUMINIUM U CHANNEL The universal solution to capping the ends of PLANKWALL sheets. Can be straight cut for ends only or we can provide you with a fully framed panel with mitred corners. Channel size: 22mm wide with 25mm legs RADIUS ALUMINIUM CAPPING Our radius aluminium end caps and 90 corners can transform a basic square edge into a designer item. Moulded plastic corners complete the effect, providing a simple and effective finishing method. END CAP Straight cut - for end capping. AP4224-2400mm (L) AP4224/5M - 5000mm (L) Available in clear anodised aluminium AP8100-5000mm (L) Available in Clear Anodised (A) or Mill Finish (M). 90 CORNER Mitred corners. We can also provide you with full framed panels with mitred corners around all sides. Maximum fully assembled size: 2400mm x 1800mm. Larger sizes provided as separate components. Enquire for pricing. AP8110-5000mm (L) Available in Clear Anodised (A) or Mill Finish (M). ALUMINIUM ANGLES We stock a range of aluminium angles to provide convenient solutions for end trimming, internal and external corners, etc. Length: 6500mm. PLASTIC CORNERS For 2 or 3 way corners. Injection-moulded plastic. ALUMINIUM H JOINER Provides covering for panel butt joints. Lenght: 5500mm AP9210A - 25 x 25mm AP9215A - 20 x 20mm AP9216A - 20 x 12mm Available in clear anodised finish. PLASTIC END CAPS AP8102 Available in Black (B), White (W) or Silver (S). With hole for leveller. Injection-moulded plastic. AP4236A Available in clear anodised finish. AP8104 Available in Black (B), White (W) or Silver (S).

SYSTEMS 1 SYSTEMS 1 PANELS & GONDOLAS Our Systems 1 framing system is a range of aluminium sections that provide structural support to the PLANKWALL panels allowing the possibility of free-standing panels and gondolas. 18mm thick panels can be grooved on both sides with offset-grooves that can provide double-sided display panels very economically. ECONOMY GONDOLAS A5 A1 FREE-STANDING DISPLAY PANELS Select from our large range of standard panels sizes and choose the leg brackets that will suit your needs. Leg brackets simply slide over the aluminium side extrusion to support the panel. Order components separately: 1) Order the display panel (refer to standard sizes) 2) Order the corresponding base: AP4460-600mm x 600mm AP4461-800mm x 600mm AP4462-1200mm x 600mm 3) Order the metal legs. Panel sizes: (panels grooved both sides for double sided display). AP4450-600mm (W) x 1200mm (H) AP4452-600mm (W) x 1400mm (H) AP4455-800mm (W) x 1200mm (H) AP4456-800mm (W) x 1400mm (H) AP4454-1200mm (W) x 1200mm (H) (1400mm high panels have 200mm plain panel at the bottom). AP4421A Sold in pairs. Double-sided PLANKWALL panels are stocked in White, Silver Grey, Beech & Lite Aluminium. All other standard ADP colours are available subject to small minimum order quantities. METAL LEGS (SOLD IN PAIRS) AP4420 Flat. AP4421 Legs with castors.

A1 A6 PLANKWALL GONDOLA SINGLE SIDED GONDOLA PLANKWALL GONDOLAS Exclusive radius framing system incorporates invisible screw fixing with moulded corners for an upscale appearance. Our range of PLANKWALL double thickness gondolas offer you the convenience of a heavy duty display unit that comes to you flat packed and ready for very simple assembly. These units include metal legs that slide in between the PLANKWALL panels and attach to the base of the unit, providing a strong structural support. Available in single sided configuration to stand against a wall or as a mobile double sided unit with a variety of options. Proven performers for displaying a wide range of merchandise, including hangsell, shelving, etc... Single sided PLANKWALL panel with melamine base on plinth. DOUBLE SIDED GONDOLA Double sided PLANKWALL panel with melamine base on castors. Base Dimension: AP4015 1200 x 800mm AP4016 1800 x 800mm AP4017 2400 x 800mm Base Height: 120mm Overall Height: 1300mm AP4013 AP4014 Base Dimension: 1200mm x 535mm (Effective shelf width: 450mm) Base Height: 120mm Overall Height: AP4013-1300mm AP4014-1800mm END PANEL Incorporates heavy duty plastic clip-on extrusion that snaps onto aluminium gondola capping. Includes 2 x base brackets for attaching end panel to base. AP4018 600mm (W) x 1200mm (L) AP4019 800mm (W) x 1200mm (L) SIGN CLIPS For attaching signage up to 3mm thick. Plastic clip-on extrusion. End panel clip (2 included per panel). AP4475 For gondola panel. AP4426 For end panel. OPTIONS AVAILABLE: Powdercoated aluminium capping. Fully enclosed plinth base without castors. Custom Panel Heights. PLANKWALL Gondolas are available in the full range of ADP melamine colours.

PINWHEEL GONDOLA PLANKWALL GONDOLAS Offers efficient merchandising capabilities with display on all 4 sides. Available in all standard ADP colours. All displayed merchandise is contained within the base area for safety. Individual panels framed in the rigid SYSTEMS 1 aluminium sections and simply slide together. Incorporates top shelf for additional display. Fully flat packs and simply assembled.s AP4030 Base Size: 900 x 900mm Display Panel Size: 4 off 600 x 1200mm B A7 A1 AP4031 Base Size: 1500 x 900mm Display Panel Size: 2 off 600 x 1200mm 2 off 1200 x 1200mm AP4032 Base Size: 2100 x 900mm Display Panel Size: 2 off 600 x 1200mm 2 off 1800 x 1200mm Steel rods are tightened into the pre-drilled holes in the gondola base. The frame of the display panels simply slides over these rods. A B A An aluminium extrusion on the back of each panels slides into the aluminium frame to hold the panels together. REVOLVING DISPLAY PANEL Convenient double sided panel on circular revolving base. AP4453 Panel Size: 400mm (W) x 1300mm (H) Circular Base: 450mm dia. Available in white only. Other colours available subject to minimum to 10 units.

A1 A8 PLANKWALL ALL-ALI PLANKWALL ALL-ALI The PLANKWALL ALL-ALI system is a range of extruded aluminium profiles that offers modern high-tech design with the following features: Available in long lengths - 5 metres - for display walls with minimal joins. Totally concealed fixing, with each successive plank covering the fixiings on the previous one. Lightweight and easy to assemble - only requires 1 man installation. Extensive colours and finish options available. Stocked in clear anodised finish to give you a sophisticated metallic look or in mill finish that may be powdercoated in a whole range of colours to your specification. The extruded section provides a more seamless finish without the visible distraction of different coloured inserts in the grooves on a timber panel. Effective Panel Height: 150mm Standard Length: 5000mm Section Thickness: 12mm Specify Mill Finish (M) or Clear (natural) Anodised (A). To calculate overall panel height = [No. of planks x 150mm] + Top cap height. 75mm GROOVE SPACING 50mm GROOVE SPACING AP4303 AP4308 25mm GROOVE SPACING AP4315 Top cap. Effective height - 25mm. 150mm GROOVE SPACING AP4315 Top cap. Effective height - 25mm. AP4305 AP4306 AP4304 Top cap. Effective height - NIL. AP4315 Top cap. Effective height - 25mm.

END CAP Aluminium J channel. 13mm inside. AP4311 5000mm (L) ALL-ALI / UNI SLAT 2-PIECE RADIUS CORNER Aluminium extrusions clip together to cover 90 external angles. Can also be used for internal angles. A9 A1 AP4230 5000mm (L) INSTALLATION INSTRUCTIONS - ALL-ALI On flushed plasterboard walls, aluminium planks can be screwed directly into the steel studs. Fixings must be at a maximum of 600mm centres. On brick/masonry walls, the best results are obtained when the aluminium planks are fixed onto vertical timber wall battens. Recommended batten spacing is every 450mm. Further strength can be obtained by using panel adhesive on the back of the plank - where it touches the wall. UNI-SLAT Extruded aluminium section for applications requiring only a single level of merchandising. Ideal for office workstations, workshop and home applications. Use in conjunction with the new SLATBOX range. Clever clip-on brackets leave no visible fixings. Injection-moulded plastic end caps complete the installation. WALL CLIP Strong white nylon clip incorporates wall marking pins. Simply attach clips to the back of the extrusion, position on the wall and tap in place. The sharpe, moulded pins will leave an impression in the wall for easy bracket alignment. AP4320 Size: 10mm (D) x 95mm (H) Length: 5000mm Available in Mill Finish (M) or Clear Anodised (A). Specify colour. RETAIL Use as an inconspicuous, laterally adjustable system for single level merchandising. OFFICE Use as a convenient storage method for efficient workstation organisation. WORKSHOP Use with SLATBOX or other accessories for a functional and flexible component storage solution. END CAPS Injection-moulded caps finish off the end. AP4324 At least 2 clips needed per strip - 3 recommended per metre. AP4321 Sold in pairs (1 x LH, 1 x RH). Available in grey plastic.

A10 SYSTEMS 1 CAPPING CAPPING COMPONENTS A convenient capping system for 18mm thick panels. Capping is retained by counter-sunk screws - there is no visible fixing. Extrusions simply slide over screw heads. A B C End capping AP4401-5000mm (L). Top capping AP4405-4750mm (L). Available in mill finish (M) or clear anodised (A) aluminium. Die-cast corner AP4451 PANEL JOINER Mill-finish aluminium. Slides into SYSTEMS 1 end cap. FIXING PIN Zinc finish steel pin, threaded on 1 end including flat washers and nut for attaching to solid base. Pin slides inside SYSTEMS 1 end cap. AP1767-4000mm (L). AP4030PIN - 200mm (L). PANEL HINGE Polypropylene hinge clips onto SYSTEMS 1 end cap, allow panels to hinge from 0-180. SYSTEMS 2 CAPPING Small capping for unobtrusive finishing of PLANKWALL. Retained by 6g counter-sunk screw heads - no visible fixing required. AP4408-5000mm (L). Available in anodised aluminium. AP4412 AP4409A - Die cast corner. Available in chrome finish. GONDOLA CAPPING SYSTEM Designed as a capping for double-sided gondola panels with a combined thickness of 58mm. SYSTEMS 2 HORIZONTAL CORNER Designed for capping around horizontal edges using SYSTEMS 2 capping. Plastic moulded. B A Capping is retained by a PVC clip. PVC clips are fixed to the edges of the panel - the aluminium cap simply springs onto this clip. A B Aluminium capping AP4448-5000mm (L). Available in mill finish (M) or clear anodised (A). Die-cast corner AP4458-5000mm (L). Available in raw (R) Bright Silver powdercoat (A). PLASTIC CLIP EXTRUSION AP4407 Satin chrome finish. Grey PVC extrusion will clip tightly onto aluminium gondola capping. Ideal for attaching end panels or other fixtures. C B Plastic clip AP4457-60mm (L). Also available in 2400mm lengths AP4457/8. AP4459-2400mm (L).

SLAT-BOX A11 super tough small parts storage solution slathook ensures fitting to existing store fixtures point of purchase made easy elegant design to suit retail applications slathook ensures fitting to existing store fixtures convenient label holder optional dividers provide extra flexibility AP4621 AP4623 4 sizes to suit all needs Slotted Wall Slatgrid Pegboard (with adaptor) Square Grid (with adaptor) Slotted Wall Slatgrid Pegboard (with adaptor) Square Grid (with adaptor) Storbox-Std AP4620 130mm (W) x 140mm (L) x 97mm (H) Popbox-Std AP4600 136mm (W) x 140mm (L) x 98mm (H) Storbox-Wide AP4622 130mm (W) x 290mm (L) x 97mm (H) Popbox-Cube AP4602 160mm (W) x 140mm (L) x 191mm (H) Storbox-Cube AP4624 150mm (W) x 150mm (L) x 178mm (H) Popbox-Bia AP4604 357mm (W) x 280mm (L) x 183mm (H) Storbox-BIg AP4626 275mm (W) x 280mm (L) x 170mm (H) Popbox-Jumbo AP4606 357mm (W) x 560mm (L) x 183mm (H) Colours: (add colour code to end of product code). Custom colours available. Colours: (add colour code to end of product code). Custom colours available. Red (RD) Blue (BL) Clear (CL) Black (BK) White (WH)

A12 SLAT-BOX ADAPTORS slathook serves as a hanglock sturdy slathook doubles as a shelf hanglock convenient label holder AP4608 - Pegboard STORBOX DIVIDER AP4609 - Square Grid optional dividers provide extra flexibility AP4611 AP4621-118 x 85mm AP4623-270 x 170mm SHELFBOX DIVIDER Slotted Wall Slatgrid Pegboard (with adaptor) Square Grid (with adaptor) Shelfbox-100 AP4610 Shelfbox-200 AP4612 Shelfbox-300 AP4614 145mm (W) x 140mm (L) x 95mm (H) 235mm (W) x 140mm (L) x 95mm (H) 335mm (W) x 140mm (L) x 95mm (H) AP4611-116 x 87mm IMPLEMENT PRONGS Double prong injection-moulded from glass re-inforced polymer. Perfect for hanging garden implements, eg. shovels, rakes, booms, etc. Shelfbox-400 AP4616 435mm (W) x 140mm (L) x 183mm (H) AP4630-60mm (L) AP4631-120mm (L) Colour - Black. Colours: (add colour code to end of product code). Custom colours available. Red (RD) Blue (BL) Clear (CL) Black (BK) White (WH)

SWIVEL SHOE DISPLAYER With toe stop. Angled shelf size: 90mm x 260mm. Injection-molded clear plastic. AP069 SHOE SHELVES SLOPING SHOE SHELF Face out style. Angled shelf size: 75mm x 300mm. Clear acrylic AP141 A13 SWIVEL SHOE DISPLAYER With toe stop. Angled shelf size: 70mm x 220mm. Injection-molded clear plastic. AP070 SLOPING SHELF 40 deg down slope. Angled shelf size: 240mm x 150mm with 30mm lip. Clear acrylic. AP144 SWIVEL SHOE DISPLAYER With heel stop. Angled shelf size: 70mm x 220mm Injection-molded clear plastic AP071 SLOPING SHELF 15 deg down slope for caps, a pair of shoes, etc. Angled shelf size: 175mm x 295mm. Injection-molded clear plastic AP146 SLOPING SHOE SHELF With toe stop. Angled shelf size: 90mm x 260mm. Clear acrylic. AP073 (pictured) AP074 (opposite side) MOBILE PHONE SHELF Sloping face out style with side retainers. Can be used in conjunction with security clip. AP140 SLOPING SHOE SHELF With heel stop. Angled shelf size: 95mm x 260mm. Clear acrylic. AP077 (pictured) AP078 (opposite side) SECURITY CLIP 2 piece clip attaches onto grooves of 75mm or 100mm centre plank wall. Injection-molded polycarbonate. AP158

A14 SMALL FLAT SHELF Injection-molded styrene. 250mm x 100mm 3mm thickness. AP090 SHOE SHELVES OVAL SHELF Injection-molded styrene-frosted. Size: 250mm x 120mm. AP185 SMALL FLAT SHELF Injection-molded styrene. 250mm x 100mm 4mm thickness. AP091 FLAT SHELF W/30mm LIP Small shelf with lip for screen printed branding. Injection-molded styrene. Size: 250mm x 100mm. AP095 FLAT SHELF W/30mm LIP (UPTURN) Heavy-duty 4mm fabricated acrylic. Size: 240mm x 150mm. AP122 SMALL FLAT SHELVES Injected molded styrene. AP093 250mm x 150mm AP097 125mm x 75mm AP098 200mm x 100mm AP099 300mm x 150mm FLAT SHELF Injected molded styrene. Size: 400mm x 230mm. AP107 FLAT SHELF 4mm thick acrylic with support under. Size 240mm x 240mm. AP094 FLAT SHELF Injected-molded styrene. Size: 400mm x 290mm. AP108

AP125 SHOE SHELVES/DISPLAY BINS/INFO HOLDERS FLAT SHELF W/TICKET LIP Injection-molded styrene. Ticket size: 250mm x 30mm. Shelf size: 250mm x 100mm. FLAT SHELF W/CLIP-ON TICKET LIP Injection-molded styrene. Ticket size: 250mm x 26mm. Shelf size: 250mm x 100mm. AP096 A15 FLAT SHELF W/TICKET LIP Injection-molded styrene. Ticket size: 250mm x 50mm. Shelf size: 250mm x 100mm. AP127 DISPLAY BIN W/SLOPING SIDES Length: 240mm. Front height: 75mm. Back height:145mm. Width: 200mm. AP210 FLAT SHELF W/TICKET LIP Fabricated acrylic. Ticket size: 240mm x 35mm. Shelf size: 250mm x 150mm. AP126 DEEP DISPLAY BIN With radiussed ends. Front height: 200mm. Back height: 150mm. AP173 240mm x 150mm AP174 240mm x 200mm AP175 240mm x 290mm OVAL SHELF W/CURVED TICKET LIP Offers maximum branding potential. Injection-molded styrene. Ticket size: 300m x 35mm. Shelf size: 250mm x 120mm. AP187 ACRYLIC INFORMATION HOLDERS Folded acrylic sandwich panel for single sheet information display. AP435 148mm x 210mm (A5) AP436 210mm x 297mm (A4) AP437 297mm x 420mm (A3) AP438 420mm x 594mm (A2) AP439 594mm x 840mm (A1) AP440 840mm x 1188mm (A0) AP441 500mm x 760mm AP442 760mm x 1000mm All information holders are in portrait format. Landscape also available, use suffix L on item number.

A16 PLANKWALL SHELF BRACKETS PLANKWALL SHELF BRACKETS A unique system utilizing a selection of straight or sloping brackets with a range of shelving options to give a completely versatile display. Brackets are manufactured from unbreakable, injection molded transparent polycarbonate. The versatility of the system allows you to convert from flat to sloping shelves or vice versa at any time. FLAT BRACKET Includes slide-on locking stud and friction pad. Alternative mounting on side of bracket. Length: 280mm. AP167 DOWNSLOPE 25 BRACKET With molded pin for retaining shelves. Length: 150mm. AP148 Clear button attaches through the fixture and into receptacle on the bracket. A single bracket may be used in the middle of the 2 fixtures for a continuous display. AP163 (only compatible with AP167 bracket) LOCKING STUD & FRICTION PAD DOWNSLOPE 60 BRACKET With molded pin for retaining shelves. Length: 140mm. AP149 AP168 Locking stud AP169 Friction pad UPSLOPE 10 BRACKET Includes slide-on locking stud and friction pad. Length: 130mm. AP164 FLAT ACRYLIC SHELF Including polycarbonate shelf brackets. AP100 400mm x 150mm (10 upslope) AP101 400mm x 230mm AP102 400mm x 290mm AP103 560mm x 150mm (10 upslope) AP104 560mm x 230mm AP105 560mm x 290mm FLAT BRACKET Includes slide-on locking stud and friction pad. AP165 180mm AP166 230mm

ACRYLIC SHELVES & DISPLAY BINS ACRYLIC SHELVES W/30mm LIP This simple and versatile and economic shelving method allows for either flat or sloping shelves. Flat shelves have the option of either upturn or downturn front lips. N.B. Brackets are purchased separately. A17 SIZE BRACKETS REQ (purchase separately) ITEM #: L x W (mm) FLAT SLOPING QTY AP106 240 x 180 AP164 AP148/9 2 AP109 240 x 300 AP166 AP148/9 2 AP110 560 x 150 AP164 AP148/9 2 AP111 810 x 150 AP164 AP148/9 3 AP112 560 x 230 AP165 AP148/9 2 AP113 810 x 230 AP165 AP148/9 3 AP114 560 x 290 AP166/7 AP148/9 2 AP115 810 x 290 AP166/7 AP148/9 3 AP117 1150 x 150 AP164 AP148/9 3 AP118 1150 x 230 AP165 AP148/9 3 AP119 1150 x 290 AP166/7 AP148/9 3 AP124 560 x 350 AP167 AP148/9 2 AP128 810 x 350 AP167 AP148/9 3 AP129 1150 x 350 AP167 AP148/9 4 ACRYLIC SHELVES W/80mm LIP For sloping display of thicker items. SIZE BRACKETS REQ ITEM #: L x W (mm) QTY AP130 560 x 300 2 AP131 810 x 300 3 AP132 1150 x 300 3 AP135 560 x 350 2 AP136 810 x 350 3 AP137 1150 x 350 4 ACRYLIC DISPLAY TRAYS Ideal for a range of loose merchandise that requires retaining; these trays can be used with flat or sloping brackets (brackets purchased separately). All trays have a 55mm internal depth. Dividers are available to provide separate compartments. The AP167 bracket can be use to mount the 300mm & 350mm width trays in a continuous row with a common central bracket. Use AP163 buttons to fasten onto bracket (4 per tray) TRAY DIVIDERS AP215 150mm AP216 230mm AP217 290mm AP218 350mm SIZE BRACKETS REQ (purchase separately) ITEM #: L x W (mm) FLAT SLOPING QTY AP170 240 x 150 AP164 AP148/9 2 AP171 240 x 230 AP165 AP148/9 2 AP172 240 x 300 AP166/7 AP148/9 2 AP190 560 x 150 AP164 AP148/9 2 AP191 560 x 230 AP165 AP148/9 2 AP192 560 x 300 AP166/7 AP148/9 2 AP193 810 x 150 AP164 AP148/9 3 AP194 810 x 230 AP165 AP148/9 3 AP195 810 x 100 AP166/7 AP148/9 3 AP196 560 x 350 AP167 AP148/9 2 AP197 810 x 350 AP167 AP148/9 3

A18 METAL SHELVES / PAPER SHELVES FLAT METAL SHELF Including polycarbonate shelf brackets. Powder coated finish. Front lip: 25mm. AP176 600mm x 200mm AP180 600mm x 250mm AP181 600mm x 300mm AP182 600mm x 350mm SLOPING PAPER SHELVES For effective and tidy display of loose paper sheets. Available for A4 or 300mm x 300mm paper sheets. Incorporates front lip with cut out for easy access. Use with AP148-25 down slope brackets ordered separately. Available in Raw finish (RAW). Other powder coat finishes available to order. A4 PAPER LENGTH AP152 2 compartment 460mm AP153 5 compartment 1150mm 300mm x 300mm PAPER AP160 2 compartment 640mm AP161 3 compartment 950mm SLOPING METAL SHELVES Ideal for frontal display of boxed items, e.g. software, packaged paper, books, etc. Back height: 200mm. Designed for use with 60 down slope brackets (AP149) ordered separately. AP138 560mm x 100mm AP139 560mm x 150mm Available in Raw finish (RAW). Other powder coat finishes available to order. SLOPING METAL SHELVES W/50mm LIP Designed for use with either sloping bracket (order brackets separately). AP150 560mm x 300mm AP151 560mm x 350mm SLOPING TRAY Ideal for A4 size brochures, paper, etc. Injection-molded styrene. Front height: 25mm. Width: 225mm x 355mm. AP145 PERFORATED METAL SHELF Square punched hole pattern with bullnose front edge. Available in Raw finish (RAW). Other powder coat finishes available to order. SLOPING METAL SHELVES W/150mm LIP Designed for use with either sloping bracket (order brackets separately). AP155 560mm x 300mm AP156 560mm x 400mm AP923 1200mm x 300mm AP924 1200mm x 400mm Stocked finish: Raw Steel (powder coated to selected colour) Available in Raw finish (RAW). Other powder coat finishes available to order.

METAL SHELF BRACKETS AP800-150 AP800 AP801 AP802 AP803 AP804 AP805 150mm L 200mm L 250mm L 300mm L 350mm L 400mm L 450mm L SHELF BRACKETS Finishes: Chrome (C) or White (W). POLYCARBONATE SHELF BRACKETS Crystal clear, injection-molded shelf brackets including suction caps for glass shelves. AP079 100mm L AP080 150mm L AP081 200mm L AP082 250mm L AP083 300mm L AP084 350mm L A19 SHELF BRACKET CLIPS AP807 clear plastic clip for attaching melamine shelf with 6g x 16mm screw. AP808 clear plastic clip with grey rubber grommet inserted. May be used with glass or melamine shelves. AP809 grey rubber grommet only. BRACE SUPPORT For shelves 300mm or longer. Provides excess of double the weight capacity of the shelf. AP806. TRIANGULAR SHELF BRACKET Low-profile metal bracket for 18mm thick melamine shelves up to 300mm deep. AP818 ALUMINIUM SHELF BRACKET For 8-10mm thick glass. (May be used with 6mm thick glass with extra piece of glazing rubber on top please specify if this is required.) Length: 50mm AP890/2 Finish: Clear anodized (includes pair of shelf rests for either thickness). ADJUSTABLE SHELF BRACKETS Adjustable angle brackets adjust from 15 up, flat, 15, 30, 45 down. AP811 250mm L AP812 300mm L AP813 350mm L AP814 400mm L AP815 450mm L. FRONT END STOP 50mm long overall to retain sloping shelves. AP817. ALUMINIUM SHELF BRACKET For 16mm 18mm thick melamine shelves. Length: 50mm. AP891/2 Finish: Clear anodized (includes pair of shelf rests for either thickness). Also available as 5m long extrusion. AP890/5M For 8mm 10mm thickness. AP891/5M For 16mm 18mm thickness. AP892 Individual pair of shelf rests: 50mm long

A1 A20 SLOTTED ADAPTOR BRACKETS Converts 40mm pitch slotted brackets into plank wall shelf brackets. AP837 2 slot AP838 3 slot Finishes: Chrome (C) or White (W). SHELVING MELAMINE SHELVING 18mm thick MDF board in the full range of ADP standard colors. Shelves are edged on 2 short & 1 long edge with 2mm thick PVC tough edge to resist knocks and chips. Color groups: White (WHI) Group 1 plain colors* Chalk (CHA), Silver Grey (SIL), Frost Grey (FGY), Armor Grey (ARM), Clear Coat (CLR), Buttermilk (BUT), Black (BLA) Group 2 pattern & bright colors* Plank Maple (MAP), Beech (BEE), Jarrah (JAR), Quarry stone (QUA), Lite Aluminum (ALU), Wenqe (WEN), Bright Red (RED), Bright Blue (BLU), Bright Yellow (YEL) *Subject to small minimum quantity SHELF DIVIDER Use above melamine shelves to divide into compartment. Ideal for manchester, folded knitwear, etc. AP881 270mm deep x 200mm high. Available in chrome finish. AP4140 600mm x 240mm AP4141 600mm x 300mm AP4142 600mm x 350mm AP4143 600mm x 450mm AP4145 900mm x 240mm AP4146 900mm x 300mm AP4147 900mm x 350mm AP4148 900mm x 450mm AP4150 1200mm x 240mm AP4151 1200mm x 300mm AP4152 1200mm x 350mm AP4153 1200mm x 450mm AP4154 1200mm x 600mm AP4155 1800mm x 240mm AP4156 1800mm x 300mm AP4157 1800mm x 350mm AP4158 1800mm x 450mm AP4159 1800mm x 600mm AP4160 2400mm x 240mm AP4161 2400mm x 300mm AP4162 2400mm x 350mm AP4163 2400mm x 450mm AP4164 2400mm x 600mm GLASS SHELVES 6mm thick toughened glass with polished edges and front 2 corners with 10mm radius. AP4170 600mm x 250mm AP4171 600mm x 300mm AP4172 600mm x 350mm AP4173 600mm x 450mm AP4175 900mm x 250mm AP4176 900mm x 300mm AP4177 900mm x 350mm AP4178 900mm x 450mm AP4180 1200mm x 250mm AP4181 1200mm x 300mm AP4182 1200mm x 350mm AP4183 1200mm x 450mm MELAMINE SHELVING W/50MM FRONT Aluminum angle screwed onto front of shelf provides slot to retain a 4mm thick clear acrylic front. AP4130 600mm L AP4131 900mm L AP4132 1200mm L AP4133 1800mm L AP4134 2400mm L N.B. To order, order your selected melamine shelf size from list above and add the shelf front of appropriate length e.g. AP4151 + AP4132

INJECTION-MOULDED SHELF The new plastic shelf in a frosted transparent finish provides exciting merchandising possibilities. Moulded in one piece plastic with strengthening ribs - virtually unbreakable. SHELVING ALUMINIUM TREADPLATE SHELF Aluminium shelf with raised treadplate pattern providing the classic industrial look. A21 A1 AP6326-600mm x 400mm AP6327-900mm x 400mm AP6336-610mm x 330mm AP6337-1220mm x 330mm AP6338-1220mm x 380mm SHELF BRACKET With front lip. Specially for use with injection moulded shelf. PELMET BRACKET Extends from 400-600mm from the wall. AP6340-305mm - suit 330m moulded shelf. AP6341-355mm - suit 380m moulded shelf. SOFT-FORMED TIMBER SHELF With distinctive bullnosed frontedge to give you an upmarket feel - 25mm thick board in the full range of colours excluding Roble and Wenge AP899 Available in Bright Silver powdercoat finish. TORSO FITTING Suitable for all torsos with neck fitting. See page D6/7. AP885 CURVED WATERFALL 7 pin, 300mm long.. AP6346-600mm x 400mm AP6347-900mm x 400mm AP6348-1200mm x 400mm AP893 Available in chrome finish.

A1 A22 PEGBOARD HOOKS STANDARD DUTY 3mm diameter wire. AP550 50mm L AP551 100mm L AP552 150mm L AP553 200mm L. DISPLAY PRONGS HEAVY DUTY PRONGS With metal back plate. 6mm diameter wire with rounded end. AP840-75 75mm L AP840 100mm L AP841 150mm L AP842 200mm L AP843 250mm L AP844 300mm L (C), Black (B) or White (W) PEGBOARD HOOKS HEAVY DUTY 6mm diameter wire. AP560 100mm L AP561 150mm L AP562 200mm L AP563 250mm L AP564 300mm L. DOUBLE PRONG 4mm diameter wire loop style prong with metal backplate to suite pegboard or plankwall. AP830 AP831 AP832 AP833 AP834 100mm L 150mm L 200mm L 250mm L 300mm L PLASTIC HOOK Injection-molded clear polycarbonate. Length: 25mm AP086 DOUBLE HOOKS For slotted hole packages. Standard duty wire prong with black plastic cover. AP575 100mm L AP576 150mm L AP577 200mm L PLASTIC HOOK Injection-molded polycarbonate. AP087J AP088J 100mm L 150mm L Finish: Clear (CL) or Black (B) PEG HOOK ACCESSORIES Nylon Safety Tip AP586 To suit standard-duty prongs (3mm dia) AP587 To suit heavy-duty prongs (6mm dia) Short Stop Snaps easily and screwed onto prong, keeps merchandise up front. Also allows for pre-packed merchandise to be in place during transit. AP593 To suit standard-duty prongs (3mm dia): yellow AP594 To suit heavy-duty prongs (6mm dia): red Scanning Plate Snaps easily and securely onto prong. simplest and cheapest way to convert standard peg hooks to scanning hooks. Plate size: 62mm x 30mm AP598 To suit standard-duty prongs (3mm dia) AP599 To suit heavy-duty prongs (6mm dia)

PICTURE HOOK - METAL AP839 UTILITY HOOKS SMALL UTILITY HOOKS For everything you ve ever wanted to hang on a hook! Clever 2-piece design self-locks the hook onto the board so that it won t tip or fall out during use. Ideal for commercial, office and home use including displays, hardware, office items, kitchen and bathroom utensils, stationery, cosmetics, etc. B E A D A23 PICTURE HOOK PLASTIC Injection-molded clear polycarbonate. AP085 PLASTIC BUCKET HOOK Metal hook for supporting plastic containers designed to fit onto louver panel. AP0836 Finish: Galvanized Steel F G A) AP578 Single Bracket 30mm AP579 Single J hook (not pictured) 38mm (h) x 12mm (w) B) AP580 25mm dia ring C) AP581 25mm dia clip D) AP582 Double bracket 30mm E) AP583 Single bracket 15mm F) AP584 12mm dia ring G) AP585 12 dia clip REEL DISPLAY SYSTEM Designed for displaying and dispensing items on plastic reels, e.g. electrical cable, flexible plastic extrusions, scrap booking ribbons, etc. C KEYHOLE CLIP Designed for attaching commonly available hardware accessories onto plank wall. Injection-molded grey plastic. AP159 METAL BACKPLATES Standard back plates available for various attachments or custom-made fixtures. Size: 50mm W x 70mm H. AP9300 Raw steel. AP9300C Chrome finish. With 2x pre-drilled 5mm diameter holes. Reel Bracket AP827 150mm Finish: Powder coat Grey. BELT HOLDER 4 prong. 300mm long overall. AP887 Reel Tubing AP828 150mm AP829 300mm 19mm diameter chrome tube including screw-in end caps.

A1 A24 SCANNING HOOKS / TROUSER DISPLAY SCANNING HOOK All-metal design with flat back plate to prevent wall being marked (Order label holders separately). AP820 100mm L AP821 150mm L AP822 200mm L AP823 250mm L AP824 300mm L SCANNING LABEL HOLDERS Clear plastic holder for all out scanning hooks - clips onto front of hook and hangs vertical flips up out of the way for easy stocking, then falls back into full view. Designed for use with plain paper labels. AP825 50mm (W) x 32mm (H) AP826 76mm (W) x 32mm (H) PLASTIC SCANNING HOOK Glass-filled acetyl plastic gives this hook 3x the strength of un-filled plastic hooks. Self-locking design locks hooks onto panel so that it can t wobble or lift out during use. Self-loading slant-back design. (Order label holders separately). AP635 100mm L AP636 150mm L AP637 200mm L TROUSER RAIL SYSTEM An extremely space-efficient display system for trousers, tea towels, etc Swivel arms with non-slip plastic coating swivel from side to side for a full view of the product, allowing easy selection by customers. 2-PIECE SCANNING HOOK MEDIUM DUTY White plastic molded back plate with 4.5mm diameter galvanized wire prong with angled safety ends. (Order label holders separately). AP620 100mm L AP621 150mm L AP622 200mm L AP623 250mm L Tubing Bracket Clamps onto 25mm square tubing. AP895 2-PIECE SCANNING HOOK HEAVY DUTY Grey plastic molded back plate with 6mm diameter galvanized wire prong with angled safety ends. (Order label holders separately). N.B. Label holders fit tightly on these hooks and they will not automatically sit in the vertical position. AP645 150mm L AP646 200mm L AP647 250mm L AP648 300mm L Our 2-piece scanning hooks allow you to layout your hooks on the wall without having to lift the whole hook to insert it. This also means that you can place hooks directly under shelves. Crossbar Tubing 25mm square tubing with holes at 25mm centers. AP896 1200mm Trouser Arm 350mm long metal prong with non-slip plastic coating. 6mm diameter wire. AP897 Finish: Black ROTATING DISPLAY 8 prong. Ideal for belts, accessories etc. AP886

CLOTHING & HAT / CAP DISPLAYS CAP DISPLAYER Injection molded clear styrene flat shelf with curved sign slot. Size: 175mm (w) x 305mm (d) AP147 A25 A1 SLOPING FACEOUT Injection-molded clear polycarbonate with 9 ball stops. AP227 375mm L WIRE CAP DISPLAYER Wire cap holder. Holds up to 6 caps. AP878 SLOPING HANDBAG FACEOUT Injection-molded clear polycarbonate with 5 J hooks. AP228 375mm L HAT DISPLAY ARM Extends 250mm from wall with 75mm diameter wire disc on top. AP879 (C) or White (W) SWIVEL SKIRT/SLACK HANGER Injection-molded clear polycarbonate with 2 metal spring clamps. AP220 WESTERN HAT ARM For wide rimmed hats or motorcycle helmets. AP872 HEADBAND DISPLAY Acrylic tube for clipping on head bands. Dimensions: 300mm (L) x 127mm (dia). Clear acrylic. AP225 SINGLE WATCH DISPLAY Injection-molded clear plastic. AP231

A1 A26 STRAIGHT FACEOUT 20mm square tubing. AP850 300mm L AP850/400 400mm L (C) or White (W) 300mm only METAL FACEOUTS WATERFALL ARM 20mm square tubing 6 ball stops. Length: 400mm AP855 (C), White (W) or Black (B) STRAIGHT FACEOUT 38mm x 13mm rectangular tubing. AP851 300mm L AP851/400 400mm L (C) or Black (B) WATERFALL ARM 38mm x 13mm rectangular tubing 7 cube stops. Length: 400mm AP856 (C), White (W) or Black (B) STRAIGHT FACEOUT 30mm x 15mm oval tubing. AP865 300mm L AP865/400 400mm L (C) WATERFALL ARM 20mm square tubing 9 pin stops. Length: 500mm AP857 (C), White (W) or Black (B) CRANKED FACEOUT 38mm x 13mm rectangular tubing. Length: 400mm. AP880 (C) WATERFALL ARM 30mm x 15mm oval tube 7 pin stops. Length: 300mm AP866 (C) CRANKED FACEOUT 30mm x 15mm oval tubing. Length: 400mm AP870 (C) WATERFALL ARM 30mm x 15mm oval tube 10 pin stops. Length: 400mm AP868 (C)

HANGRAIL BRACKETS / TICKET FRAMES ROUND HANGRAIL BRACKET To suit 25mm diameter chrome tubing. Length: 270mm. AP835 A27 A1 RECTANGULAR HANGRAIL BRACKET To suit 38mm x 13mm tubing. Length: 300mm. AP858A 75mm AP858 300mm ROUND HANGRAIL TUBING 25mm diameter round tubing. AP846/2 700mm L AP846/5 1600mm L AP846/6 1830mm L AP846/8 2440mm L AP849 Push-in flanged end cap 48mm diameter TUBING WALL BRACKETS To suit 26mm diameter tubing. AP847 Closed design AP848 Open (C) RECTANGULAR HANGRAIL 38mm x 13mm. AP853/6 1830mm AP853/8 2440mm AP853A Push-in end cap 20mm x 50mm Finishes: Chrome (C) or Black (B) RECTANGULAR HANGRAIL JOINER For joining lengths of tubing to form a continuous run. AP845RH TICKET FRAME ATTACHMENTS Screw-on fitting will clamp onto round tubing up to 32mm diameter or rectangular tubing up to 38mm x 13mm. AP524 Threaded stems AP520 75mm AP521 150mm AP522 230mm AP523 300mm (C) ACRYLIC TICKET FRAMES Chrome base channel with clear acrylic ticket holder. AP518 A5 Portrait AP518L A5 Landscape AP519 A4 Portrait AP519L A4 Landscape TICKET FRAME ATTACHMENT CHROME TICKET FRAMES Deluxe mitered-corner chrome frame with top opening. AP545 A4 Portrait AP546 A4 Landscape AP547 A5 Portrait AP549 A3 Landscape (C) AP526 Magnetic corner bracket AP863 Clamp on fitting for 38mm x 13mm tubing

A1 A28 OVAL TUBE HANGRAIL HANGRAILS / BAG FACEOUTS Deluxe design with curved corners in 30mm x 15mm oval tube. RECTANGULAR TUBE HANGRAIL Made from 38mm x 13mm rectangular tubing with square corners. AP871 600mm AP873 900mm AP875 600mm AP877 900mm (C) or Black (B) PERFORATED METAL SHELVES Bolts onto Oval Tube Hang rails (above). Allows for combining a display shelf with hang rail. AP6215 570mm x 230mm AP6216 870mm x 230mm SLOPING HANDBAG FACEOUT 5 J hooks 20mm square tube construction. Length: 400mm. AP860 AP871 + 6215 SLOPING HANDBAG FACEOUT 5 J hooks 38mm x 13mm rectangular tubing construction. Length: 400mm. AP861 GLASS SHELF SUPPORT Clips onto oval tubing for supporting a glass shelf. AP6201 (sold individually) with clear glass cushion STRAIGHT HANDBAG FACEOUT 5 J hooks 38mm x 13mm rectangular tubing construction. Length: 375mm. AP862 GLASS SHELF Another way to combine a display shelf with hang rail. AP6214 565mm x 230mm AP6218 865mm x 230mm LINGERIE FACEOUT 16mm diameter round tubing with 25mm diameter front disc. Length 300mm AP859 Glass shelf only Order oval tube hang rails (#AP871/3) and glass shelf supports (#AP6201) separately.

SMALL WIRE BASKET 300mm (L) x 150mm (W) x 150mm (H). AP901 WIRE BASKETS / SHELVES FLAT WIRE BASKET 600mm (L) x 300mm (W) x 100mm (H). AP905 A29 A1 WIRE BASKET 300mm (L) x 300mm (W) x 200mm (H). AP903 FLAT WIRE BASKET Convenient wire shelves allow for dust-free display. 600mm (L) x 375 (L) with 75mm high front lip. AP911 WIRE BASKET W/SLOPING SIDES 300mm (L) x 300mm (W) x 200/100mm (H). AP904 SLOPING WIRE SHELF 600mm (L) x 375mm (W) with 75mm high front lip. AP912 LONG WIRE BASKET May be supported from either front or back to provide either flat or display. AP931 1220mm (L) x 300mm (W) x 200mm (H) AP933 1220mm (L) x 400mm (W) x 200mm (H) Basket Divider Provides possibilities for compartmenting the basket while giving extra support for the basket. AP936 to suit AP931 AP938 to suit AP933 Plankwall Bracket (3 brackets per basket recommended). AP942

A1 A30 INJECTION-MOULDED BOXES Chrystal clear moulded box for stockings, etc.. Wide - 390 (L) x 190 (W) x 200mm (H). ACCESSORY DISPLAYS AP179 Faceout Small - 190 (L) x 190 (W) x 200mm (H). Open side design - not suitable for small items. WIRE HOSIERY TRAY 200mm wide. AP884 AP178 Faceout Large - 190 (L) x 375 (W) x 200mm (H). AP177 Also see anti-slip base sheets below. HOSIERY DISPLAYS Fabricated clear acrylic sheet. AP375 2 compartments 450mm (L) x 150mm (W) x 170mm (H) AP376 4 compartments 600mm (L) x 150mm (W) x 170mm (H) SHIRT CUBE For folded clothing, towels, etc. Size: 300mm (L) x 400mm (W) x 300mm (H) AP355 Open side design - not suitable for small items. SMALL DISPLAY CASE Clear acrylic case with open back allows you to safely display valuable items on shelves on the plank wall. Single front door with top & bottom lock (Purchase plank wall shelves separately). AP392 450mm (L) x 170mm (W) x 600mm (H) Includes metal Plankwall attachment fittings. LARGE DISPLAY CASE Larger version of the above unit with 2 hinged doors and top & bottom lock. AP393 600mm (L) x 170mm (W) x 750mm (H) Includes metal Plankwall attachment fittings. ANTI-SLIP BASE SHEET Designed for sitting on the bottom of injection-moulded boxes above. Prevents products sliding forward when box emptys. AP188-180 x 180mm AP189-365 x 180mm

SPECTACLE ROD SYSTEM The most flexible method of display all types of spectacles on PLANK WALL. Injection-molded polycarbonate fittings snap securely onto 16mm diameter solid acrylic rod. Plankwall Rod Attachment Required at top and bottom of rod. Snaps onto acrylic rod. AP246 2 required per rod SPECTACLE DISPLAYS SPECTACLE DISPLAYER Injection-molded clear plastic displays open spectacles. Size: 130mm x 175mm. AP242 A31 A1 Bent Acrylic Rod AP244 1000mm FOLDED SPECTACLE DISPLAYER Injection-molded clear plastic displays folded spectacles. AP247 50mm AP243 80mm (For curved spectacles) Standard Spectacle Attachment AP7331 JEWELLERY DISPLAYER Injection-molded clear plastic arm for bangles, necklaces, etc. Length: 400mm AP233 Spectacle Attachment For curved sunglasses. AP7330 Clip-on sign holder A7 acrylic sleeve with clip attachment for feature highlights, etc. AP241 DOUBLE RAIL For gift wrap, towels, etc. Length: 600mm AP223 BALL HOLDER 130mm diameter wire ring. AP888 (C) or White (W) BALL DISPLAYER Injection-molded clear styrene with curved sign slot. Size: 195mm (L) x 275mm (W). AP229 (C) or White (W)

A1 A32 GREETING CARD / MAGAZINE DISPLAY MAGAZINE / CARD DISPLAYS Clear PVC extrusion that can be used individually for greeting cards or in multiple rows for magazines, calendars, etc. Our selection of injection-molded dividers clips onto the extrusion anywhere along its length. This allows you to achieve an orderly display while offering endless arrangement flexibility. Clear PVC Extrusion Approx. 25mm effective width x 85mm high. Length: 2400mm AP335 CLIP-ON DIVIDERS SMALL Small dividers are designed for a flexible brochure display up to A4 size, when used at 150mm centers. The whole range of brochure sizes can be accommodated in the same row. Height: 150mm Small Clip-On Divider AP331 Centre Divider AP338 CLIP-ON DIVIDER LARGE Injection-molded clear divider retains magazines and other larger items. Height: 210mm. AP336 - Centre AP334L - LH end (not pictured) AP334R - RH end (not pictured) LH End Divider AP337 RH End Divider AP339 ACRYLIC MAGAZINE RACKS An ideal method of displaying large quantities of magazines, these fabricated clear acrylic units can be used in a single row or 2 or 3 tier configuration. For a full height display up to 1800mm high, use (2 x 3) + (1 x 2) tier units. Each row is 75mm deep x 250mm high. Single Row AP1291 AP1295 Two-tier AP1292 AP1296 Three-tier AP1293 AP1297 900mm L 1180mm L 900mm L 1180mm L 900mm L 1180mm L

METAL PHONE SHELF OFFICE TRAYS / GOLF DISPLAYS Includes 2 off 25 down slope brackets (#AP148) AP341 GOLF CLUB DISPLAYS 2-piece acrylic unit with polycarbonate base brackets for maximum strength. Base had green felt insert to prevent scratching. AP365 for LHS clubs A33 A1 Available in Raw finish (RAW). METAL FILE / PHONE BOOK HOLDER 170mm (L) x 230mm (W) x 295mm (H). AP342 Available in Raw finish (RAW). AP366 for RHS clubs ACRYLIC OFFICE TRAY Includes 2 off flat brackets (#AP167) with side attachment buttons. May be used individually or in rows with single central bracket. 225mm (L) x 340mm (W) x 60mm (H) AP347 GOLF PUTTER DISPLAY Holds 15 putters in semi-circular display. Base has green felt insert to prevent scratching. AP367

A1 A34 STATIONERY / VIDEO DISPLAYS GREETING CARD RACKS New design supplied in component form, assembles in minutes with strong aluminum rivets. Eliminates transit breakage. Three-Tier End dimension: 120mm (W) x 295mm (H) AP304A 350mm L AP310A 600mm L AP311A 900mm L AP312A 1200mm L Four-Tier End dimension: 160mm (W) x 370mm (H) AP309A 350mm L AP313A 600mm L AP314A 900mm L AP315A 1200mm L VIDEO / BOOK DISPLAY SHELF Angled back design effectively displays a wide range of product from small books and CD s up to an A4 size book. Channel depth: 75mm. AP326 280mm L AP327 560mm L AP328 810mm L AP329 1150mm L HORIZONTAL PEN DISPLAY 8 compartment with easy access shortened dividers. 600mm (L) x 150mm (W) x 120mm (H). AP317 ALBUM / FRAME DISPLAY ENDS Place brackets wherever you need them for any width book / picture frame, etc. Extends 250mm from wall. AP300 LHS AP301 RHS VERTICAL PEN DISPLAY Slightly angled back to keep pens neat. 600mm (L) x 70mm (W) x 120mm (H). AP318 ALBUM / FRAME DISPLAY CENTRE AP305 SINGLE J SECTIONS For books, videos, etc. Front height: 75mm, Back height: 90mm, Depth of channel: 50mm. AP319 150mm L AP320 600mm L AP321 900mm L AP322 1200mm L CLIP-ON DIVIDER For J section racks, etc. Divider depth: 45mm. AP7135

TAYMAR BROCHURE HOLDERS Premium range of injection-molded clear styrene brochure holders with a range of accessories for attaching multiple pockets or dividing compartments. Single DL Opening size: 104mm x 32mm, Height: 150mm AP470 BROCHURE HOLDERS Single A4 Opening size: 230mm x 32mm, Height: 250mm AP475 A35 A1 4 compartment DL Opening size: 4 @ 104mm x 32mm AP472 A4 Landscape Opening size: 330mm x 32mm, Height: 190mm AP459 DL Landscape Opening size: 230mm x 32mm, Height: 75mm AP477 Triple A4 Opening size: 3 @ 230mm x 32mm, Height: 520mm AP476 3 Compartment DL Opening size: 3 @ 108mm x 32mm, Height: 190mm AP454 Single A5 Opening size: 160mm x 32mm, Height: 190mm AP473 Double A5 Opening size: 2 @ 162mm x 32mm, Height: 190mm AP458 Single A4 Large capacity With curved feature to prevent brochures curling over. Opening size: 220mm x 50mm, Height: 240mm AP1567 ACCESSORIES Wall Spacer Clips onto back of brochure holders so that brochures are sloping back and can t curl forward. Also, can be used to convert wall units to free standing (Works on #AP470, 472, 473, and 475). AP1530 Clip-on Hook For attaching extra holders in front of a holder. AP1531 Divider For converting A4 pockets to double DL. AP1533

A1 A36 WIRE BROCHURE HOLDERS WIRE BROCHURE HOLDERS Our range of wire brochure holders offers several advantages over other forms of brochure display, including: Open design doesn t collect dust and insects! Robust lightweight construction makes them ideal for trade shows, high traffic areas, etc Economical, especially in larger units Two-Row Holders DL 4 wide x 2 rows Overall height (with brochures) 350mm AP1257-460mm wide Opening size: 105mm x 15mm Single Holders Can be used as either free-standing counter units or for hanging on PLANKWALL with back support that keeps holder at an angle. Opening Size (mm) AP1235 DL 105 x 30 AP1236 A5 155 x 30 AP1234 A4 215 x 30 A5 3 wide x 2 rows Overall height (with brochures) - 350mm AP1252-490mm wide Opening size: 155mm x 15mm A4 2 wide x 2 high Overall height (with brochures) - 390mm AP1241-460mm wide Opening size: 218mm x 10mm Five-row Holders DL 4 wide x 5 rows Overall height (with brochures) 650mm AP1258 Opening size: 105mm x 15mm A5 3 wide x 5 rows Overall height (with brochures) 650mm AP1255 460mm wide Opening size: 155mm x 15mm A4 2 wide x 5 rows Overall height (with brochures) 750mm AP1245 460mm wide Opening size: 215mm x 10mm Brochure Columns 20 pocket DL Overall height (with brochures) 1130mm AP1259 Opening size: 105mm x 15mm 10 pocket A5 (not pictured) Overall height (with brochures) 1130mm AP1250 Opening size: 155mm x 15mm Greeting Card / Postcard Column 8 Pocket Landscape Overall height: 1200mm AP1246 Opening size: 195mm x 40mm 12 Pocket Portrait Overall height: 1200mm AP1248 Opening size: 135mm x 35mm 10 pocket A4 Overall height (with brochures) 1130mm AP1240 Opening size: 218mm x 10mm

ACRYLIC BROCHURE TRAY SYSTEM An exceptionally versatile system that allows for the single trays to be used individually or in combinations to cover an entire wall. Brochures are held at an angle from the wall (approx. 130mm out from the wall at the bottom of the tray) prevent brochures curling over Supplied with separate brackets for ease of shipping. These attach to the back of the tray with aluminum fasteners provided. Separate dividers are available to divide the tray into A4 sections. Dividers clip into routed slots on the brochure tray. BROCHURE HOLDERS A37 A1 Overall Length (mm) AP1201 230mm AP1202 450mm AP1203 675mm AP1204 900mm AP1205 1120mm Divider Clear acrylic. AP1206 HI-DENSITY BROCHURE HOLDERS This system provides the solution for displaying a large number of brochures in a small space. Rows are designed so that both A4 & DL (Trifold) brochures can be displayed. Supplied with loose metal hooks for attaching to PLANKWALL. Single Column AP3010 6 row (pictured) 230mm (W) x 120mm (D) x 740mm (H) AP3011 10 row 230mm (W) x 120mm (D) x 1100mm (H) Double Column AP3012 6 row (pictured) 460mm (W) x 120mm (D) x 740mm (H) AP3013 10 row 460mm (W) x 120mm (D) x 1100mm (H) Clip-on Divider For separating individual brochures AP1209