RMB0D01_1 Issue 1, 6 th October 016 RMB0 Onxis TM magnetic encoder module The RMB0 encoder module provides the functionality of the RM encoder in a compact component format for simple customer integration. With a PCB diameter of only 0 mm the module fits into miniature designs. The encoder module consists of a magnetic actuator and a separate sensor board. Rotation of the magnetic actuator is sensed by a custom encoder chip mounted on the sensor board, and processed to give the required output format. Output signals are provided in industry standard absolute, incremental, analogue, commutation and linear formats. The RMB0 can be designed into equipment used in a wide range of applications including marine, medical, print, converting, industrial automation, motor control and instrumentation. Product range RMB0C/BC nalogue sinusoidal outputs with a single sine/cosine period per revolution. RMB0IC Incremental with 80 to,048 pulses per revolution (30 to 8,19 counts per revolution with x4 evaluation). RMB0PC bsolute parallel interface with 51 positions per revolution (9 bit). RMB0SC Synchro serial interface (SSI) with 30 to 8,19 positions per revolution. RMB0Vx Linear voltage output in a range of variants. 0 mm diameter circular module 5 V power supply High speed operation to 60,000 rpm bsolute - to 13 bit resolution (8,19 counts per revolution) Industry standard absolute, incremental, analogue, commutation and linear output formats ccuracy to ±0.5 RoHS compliant (lead free) - see Declaration of conformity
RMB0D01_1 Installation drawing Component area Ø 4 Ø 0. 0 Ø1.7 0.1 14 = = Magnet Ø 4 4 17 ±0.1 0 Ø0 0.5 1.5 ±0. B 0.15 Max. Component area Module RMB0 C RMB0 BC RMB0 IC RMB0 PC RMB0 SC PCB surface to magnet distance [mm] B Chip height [mm].35 ± 0. Max. 1.00 3.50 ± 0. Max. 1.60 RMB0Vx.80 ± 0. Max. NOTE: For the accuracy specified the center line of the magnet needs to be square to the chip within and aligned within the center of the board ±0.1 mm (mid point between the mounting holes). Clockwise (CW) rotation of magnet
RMB0C nalogue sinusoidal outputs channels V and sinusoids (90 phase shifted, single ended) Power supply = 5 V ± 5 % 0 m 360 Outputs Signal amplitude ± 0. V pp V Signal offset dd ± 5 mv Maximum speed 60,000 rpm Internal serial impedance 70 Ω 90 V ± 0. V pp RMB0C V leads for clockwise rotation of magnet V RMB0BC nalogue complementary sinusoidal outputs channels V and differential sinusoids in quadrature (90 phase shifted) Power supply = 5 V ± 5 % 0 m 360 Outputs Signal amplitude 0.5 ± 0.1 V pp V Signal offset dd ± 5 mv Maximum speed 60,000 rpm 40 C to +85 C Internal serial impedance 100 Ω (option 7: 10 Ω) (V +) (V ) 90 1 ± 0.1 V pp ( +) ( ) V leads for clockwise rotation of magnet V RMB0BC RMB0BC with connector V + NC V + V + + NC NC Connector type Molex 501568-1107 Mating connector* Molex 501330-1100 Crimp terminal 501334-xxxx *Not provided 3
RMB0D01_1 RMB0IC Incremental output Square wave differential line driver to RS4 Power supply = 5 V ±5% Output signals 35 m, B, Z,, B, Z (RS4) Complementary signals not shown 360 x 4 counts per rev = 1 cycle edge separation Resolution options (counts per revolution) Maximum speed (rpm) ccuracy* Hysteresis 18, 56 60,000 ±0.7 0.45 30, 400, 500, 51 30,000 ±0.7 0.18 800, 1,000, 1,04 0,000 ±0.5 0.18 1,600,,000,,048 10,000 ±0.5 0.18 4,096 5,000 ±0.5 0.18 8,19,500 ±0.5 0.18 *Worst case within operational parameters including magnet position and temperature. B Z reference impulse B leads for clockwise rotation of magnet. Recommended signal termination Encoder Customer electronics RMB0IC Cable Z 0 = 10R 10R 10 nf Z Z B B RMB0PC bsolute binary parallel interface Parallel absolute position measurement Output code Natural binary Power supply = 5 V ±5% Output voltage Resolution Hysteresis 0.45 ccuracy ±0.7 Repeatability 0.07 Data outputs Data input Maximum speed 0 m without load V H 4 V at I H 3 m V L 1 V at I L 3 m 9 bit (51 positions per revolution) D0 (LSB) - D8 (MSB) LE - latch enable input signal, active high Maximum sampling rate 500 khz 60,000 rpm Latch enable Data Data Data latched Data t r t r t r (reaction time) 1 µs Position increases for clockwise rotation of magnet. RMB0PC D8 D7 D6 D5 D4 D3 D D1 D0 4 LE
RMB0SC bsolute binary synchro-serial interface (SSI) Serial encoded absolute position measurement Output code Natural binary Power supply = 5 V ± 5 % Repeatability 0.07 Data output Data input 3 m for 9 bit resolution 35 m for all other resolutions Serial data (RS4) Clock (RS4) Clock Data Clock 4 MHz 1.5 µs t m 0.5 µs Position increases for clockwise rotation of magnet. Resolution options (positions per revolution) Maximum speed (rpm) ccuracy* Hysteresis 56, 30, 400, 500, 51 30,000 ±0.7 0.18 Recommended signal termination For data output lines only 800, 1,000, 1,04 0,000 ±0.5 0.18 1,600,,000,,048 10,000 ±0.5 0.18 Encoder Customer electronics 4,096 5,000 ±0.5 0.18 8,19,500 ±0.5 0.18 * Worst case within operational parameters including magnet position and temperature. Cable Z 0 = 10R 10R 10 nf RMB0SC - all other resolutions RMB0SC - 9 bit resolution only Clock Clock Data Data Data Data- Clock- Clock 5
RMB0D01_1 RMB0Vx Linear voltage output Power supply = 5 V ± 5 % Output voltage Output load Resolution of DC Max. speed Typ. 6 m 0 V to Max. m 10 bit Nonlinearity 1 % 30,000 rpm RMB0V V out The digital relative angular position information is converted into linear voltage with a built-in 10 bit D/ converter. The linear output voltage swing ranges from 0 V and (5 V). The number of periods within one revolution (N period ) can be 1,, 4 or 8, representing one full swing over an angle (φ period ) of 360, 180, 90 or 45 respectively. The signal is made up of steps which represent the angular movement needed to register a change in the position (φ step ) and the resulting change in the output voltage (V step ). The number of steps in one period (N step ) is given in the table below. For clockwise rotation of the magnetic actuator, the output voltage increases. For counterclockwise rotation, the output voltage decreases. V Detail V step 0 period for linear voltage output step = period V = step step N step N step φ period = ngle covered in one period (one sawtooth) V period = Output voltage range for one period φ step = Step angle (angular movement needed to register a change in the position) V step = Output voltage range for one step N period = Number of periods in one revolution N step = Number of steps in one period φ period N period N step φ step 360 1 104 0.35 180 104 0.18 90 4 104 0.09 45 8 51 0.09 Output type and electrical variant φ period 360 180 90 45 Rotation Clockwise V VB VC VD Counterclockwise VE VF VG VH 6
RMB 0 ordering code RMB0 IC 09B C 10 Output type C - nalogue sinusoidal BC - nalogue complementary sinusoidal IC - Incremental, RS4 PC - bsolute binary parallel SC - bsolute binary synchro-serial (SSI), RS4 Vx - Linear voltage: Linear voltage output 0-5 V, supply 5 V DC 360 180 90 45 CW V VB VC VD CCW VE VF VG VH Special requirements* 1 - No special requirements (standard for C, BC, PC and Vx) 10 - No special requirements (standard for IC and SC) 1 - With Molex connector (for BC only) 7 - With 10 Ω serial resistors (for BC only) Shape C - Circular Resolution For C and BC: 01S - one sine/cosine wave per revolution For PC: 09B - 51 positions per revolution For IC and SC (counts/positions per revolution): Decimal D3-30 D80-800 D0-000 D40-400 1D0-1000 D50-500 1D6-1600 Binary 07B - 18 10B - 104 13B - 819 08B - 56 11B - 048 09B - 51 1B - 4096 For Vx: 10B - 1,04 steps per revolution NOTE: Not all combinations are valid. * For sample quantities of RMB0 supplied with a magnet please add KIT to the end of the required RMB0 part number, eg. RMB0IC09BC10KIT. Series Output type Resolution Shape Special requirements RMB0 C PC 01S 09B BC 01S 1 / 1 / 7 IC SC D0 / 1D6 / 1D0 / D80 / D50 / D40 / D3 / 13B / 1B / 11B / 10B / 09B / 08B / 07B D0 / 1D6 / 1D0 / D80 / D50 / D40 / D3 / 13B / 1B / 11B / 10B / 09B / 08B / 07B Vx 10B 1 C 1 10 7
RMB0D01_1 Magnetic actuator and magnet ordering information ctuator for integration onto shaft Ø10 Part numbers: magnet 14 For resolutions up to 9 bit absolute (51 cpr incremental) RM0400 Ø4 mm shaft RM1000 Ø10 mm shaft RM0500 Ø5 mm shaft RM1900 Ø3/16 shaft RM0600 Ø6 mm shaft RM500 Ø1/4 shaft RM0800 Ø8 mm shaft RM3700 Ø3/8 shaft Shaft = Ø*h7 Fixing: Grub screw provided 6 * Hole diameter for nominal shaft size. See table on the right for more information on available shaft sizes. Ø*H8 Ø15-0.1 7 For resolutions from 10 bit absolute (800 cpr incremental) and above RM04300 Ø4 mm shaft RM10300 Ø10 mm shaft RM05300 Ø5 mm shaft RM19300 Ø3/16 shaft RM06300 Ø6 mm shaft RM5300 Ø1/4 shaft RM08300 Ø8 mm shaft RM37300 Ø3/8 shaft ctuator for integration into shaft Part numbers: magnet Ø8 For resolutions up to 9 bit absolute (51 cpr incremental) RMH0600 For resolutions from 10 bit absolute (800 cpr incremental) and above RMH06300 ±0.05 4 1 With N-pole marker scribed to a ±5 accuracy: with N-pole marker Ø6h8 For resolutions up to 9 bit absolute (51 cpr incremental) RMH060 For resolutions from 10 bit absolute (800 cpr incremental) and above RMH0630 Hole = Ø6G7 Fixing: Glue (recommended LOCTITE 648 or 701) Magnet for direct recessing in non-ferrous shafts Ø4 ±0.1 Fixing: Glue (recommended LOCTITE 648 or 701) 4 ±0.1 Part numbers: For resolutions up to 9 bit absolute (51 cpr incremental) RMM4400 (individually packed) for sample quantities only RMM44C00 (packed in tubes) For resolutions from 10 bit absolute (800 cpr incremental) and above RMM44300 (individually packed) for sample quantities only RMM443C00 (packed in tubes) 8
Head office RLS merilna tehnika d.o.o. Poslovna cona Žeje pri Komendi Pod vrbami SI-118 Komenda Slovenia T +386 1 57100 F +386 1 5719 E mail@rls.si www.rls.si Document issues Issue Date Page mendments done 01 6. 5. 005 - New document 0 16. 11. 005, 3 RMB0BC output and information on resolutions above 9 bit added 03 6. 1. 005 1 New installation drawing 04 1. 1. 006 3 Magnet information added and minor changes in ordering information done 05 10. 4. 006 1 New installation drawing 06. 6. 006 3 Pin out description changed 07 4. 11. 008 - New layout with new connection images 08 14. 1. 009 - New layout 09 7. 5. 011 PCB surface to magnet distance and chip height table added - Redesign of all RMB0 boards with incremental (IC) and absolute binary SSI (SC) outputs - New linear voltage output module added 10 8. 4. 016 4, 5 RMB0IC and RMB0SC 9-bit resolution deleted 6 RMB0Vx description amended 7 Ordering code amended 11 3. 6. 016, 3 RMB0IC and RMB0SC 9 bit resolution added 1 6. 10. 016 3 RMB0BC timing diagram and pinout order amended 4 IC output temperature and power consumption amended, connections 9 bit resolution deleted 7 Special requirements option 1 added, resolution binary table amended, ordering table added RLS merilna tehnika d.o.o. has made considerable effort to ensure the content of this document is correct at the date of publication but makes no warranties or representations regarding the content. RLS merilna tehnika d.o.o. excludes liability, howsoever arising, for any inaccuracies in this document. 016 RLS d.o.o.