RMB28 angular magnetic encoder module
|
|
- Theresa Stokes
- 6 years ago
- Views:
Transcription
1 sheet RM28D01_06 Issue 6, 17 th November 2010 RM28 angular magnetic encoder module The image does not represent all variants. The RM28 encoder module is designed for direct integration to high volume OEM applications. The low cost 28 mm square PC can also be provided with a connector for easy installation. The encoder module consists of a magnetic actuator and a separate sensor board. Rotation of the magnetic actuator is sensed by a custom encoder chip mounted on the sensor board, and processed to give the required output format. Output signals are provided in industry standard absolute, incremental, analogue or linear formats. The RM28 can be used in a wide range of OEM applications including motor control and industrial automation. RM28MD - Sine/Cosine + bsolute binary synchro-serial + Incremental, 5 V RM28I - Incremental, Open Collector, 24 V RM28IE - Incremental, Open Collector, 5 V RM28IC - Incremental, RS422, 5 V RM28SC - bsolute binary synchroserial, RS422, 5 V RM28SI - bsolute binary synchroserial (SSI) + Incremental, RS422, 5 V RM28V - Linear voltage output, 5 V 28 mm square module Low cost for OEM integration 24 V and 5 V power supply versions High speed operation to 60,000 rpm bsolute - to 13 bit resolution (8,192 counts per revolution) Industry standard absolute, incremental, analogue and linear output formats ccuracy to ±0.5 RoHS compliant (lead free) associate company
2 sheet RM28D01_06 RM28 installation drawing magnetic actuator magnet Ø ± component area 2.5 max D Ø31 component area 28 PC RM28 ±0.1 ± ±0.2 Output type Hole diameter (D) RM28MD 3.5 ±0.1 RM28I 3.5 ±0.1 RM28IE 3.5 ±0.1 RM28IC - 128, 256 cpr 3.5 ±0.1 RM28IC - all other resolutions 2.5 ±0.1 RM28SC - 8 bit 3.5 ±0.1 RM28SC - all other resolutions 2.5 ±0.1 RM28SI 2.5 ±0.1 RM28V 3.5 ±0.1 wise (CW) rotation of magnet 2
3 RM28MD Sine/Cosine + bsolute binary synchro-serial (SSI) + Incremental Complex feedback device for absolute position at start-up as well as during operation + incremental outputs Power supply = 5 V ± 5% Resolution 8 bit + 64 ppr (256 cpr) + one period per revolution Power consumption 13 m incremental and SSI (not loaded) SSI output code Natural binary output Serial data input Incremental outputs,, Sin/Cos outputs Signal amplitude: 1.1 ± 0.2 V Operating temperature -40 C to +125 C Maximum speed 60,000 rpm ccuracy* ±0.7 Hysteresis 0.45 * Worst case within operational parameters including magnet position and temperature. Timing diagram - SSI 900 khz 16 μs t m 22 μs Position increases for clockwise rotation of magnet. Timing diagram - Incremental 360 x 4 counts per rev = 1 cycle edge separation RM28MD reference impulse leads for clockwise rotation of magnet. Timing diagram - Sine/Cosine 360 Cos Sin V 2.2 V pp 3 5 V V leads V for clockwise rotation of magnet. associate company 3
4 sheet RM28D01_06 RM28I Incremental, Open Collector, 24 V Square wave output Power supply Resolution Power consumption Maximum output load = 8 V to 26 V 32, 64 ppr (128, 256 cpr) 13 m (not loaded) 20 m Output signals,, Operating temperature Ext. operat. temp. 0 C to +70 C -40 C to +125 C Maximum speed 60,000 rpm ccuracy* ±0.7 Hysteresis 0.45 * Worst case within operational parameters including magnet position and temperature. RM28I Timing diagram 360 x 4 counts per rev = 1 cycle reference impulse leads for clockwise rotation of magnet. Recommended signal termination edge separation PC,, +5 V R = mimimal value,, RM28IE Incremental, Open Collector, 5 V Low cost alternative for ball bearing encoders Power supply = 5 V ± 5% Resolution Power consumption Maximum output load 32, 64 ppr (128, 256 cpr) 13 m (not loaded) 20 m Output signals,, Operating temperature Ext. operat. temp. 0 C to +70 C -40 C to +125 C Maximum speed 60,000 rpm ccuracy* ±0.7 Hysteresis 0.45 * Worst case within operational parameters including magnet position and temperature. Timing diagram reference impulse 360 x 4 counts per rev = 1 cycle leads for clockwise rotation of magnet. edge separation RM28IE Recommended signal termination V+5 dd V PC R = mimimal value,,,, 4
5 RM28IC Incremental, RS422, 5 V lternative for optical encoders Power supply = 5 V ± 5% Power consumption Output signals 13 m for 7, 8 bit resolutions 35 m for all other resolutions,,, -, -, - (RS422) Timing diagram Complementary signals not shown 360 x 4 counts per rev = 1 cycle edge separation Operating temperature Ext. operat. temp. Edge separation -25 C to +85 C -40 C to +125 C 1 µs minimum Resolution options (counts per revolution) Maximum speed (rpm) ccuracy* Hysteresis 128, ,000 ± , 400, 500, ,000 ± , 1,000, 1,024 20,000 ± reference impulse leads for clockwise rotation of magnet. 1,600, 2,000, 2,048 10,000 ± ,096 5,000 ± ,192 2,500 ± Recommended signal termination * Worst case within operational parameters including magnet position and temperature. Encoder Customer electronics Cable 0 = 120R 120R 10 nf RM28IC - 32, 64 positions per revolution (128, 256 cpr) RM28IC - all other resolutions associate company 5
6 sheet RM28D01_06 RM28SC bsolute binary synchro-serial (SSI), RS422, 5 V lternative for optical encoders Power supply = 5 V ± 5% Power consumption 13 m for 8 bit resolution 35 m for all other resolutions SSI output code Natural binary output Serial data (RS422) input (RS422) Operating temperature -40 C to +125 C Maximum speed 60,000 rpm Resolution options (positions per rev) Maximum speed (rpm) ccuracy* * Worst case within operational parameters including magnet position and temperature. Hysteresis ,000 ± , 400, 500, ,000 ± , 1,000, 1,024 20,000 ± ,600, 2,000, 2,048 10,000 ± ,096 5,000 ± ,192 2,500 ± Timing diagram 900 khz 16 μs t m 22 μs for 8 bit resolution 4 MHz 12.5 μs t m 20 μs for all other resolutions Position increases for clockwise rotation of magnet. Recommended signal termination For data output lines only Encoder Cable 0 = 120R Customer electronics 120R 10 nf RM28SC - all other resolutions RM28SC positions per revolution
7 RM28SI bsolute binary synchro-serial (SSI) + Incremental, RS422, 5 V Complex feedback device for absolute position at start up as well as during operation + incremental outputs. oth the incremental and the SSI output always have the same fixed resolution. Power supply = 5 V ± 5% Power consumption SSI output code output input Incremental outputs Operating temperature Ext. operat. temp. 35 m Natural binary Serial data (RS422) (RS422),,, -, -, - (RS422) -25 C to +85 C -40 C to +125 C Timing diagram - SSI 4 MHz 12.5 μs t m 20.5 μs Position increases for clockwise rotation of magnetic actuator. Resolution options (positions/counts per rev) Maximum speed (rpm) ccuracy* Hysteresis 320, 400, 500, ,000 ± , 1,000, 1,024 20,000 ± ,600, 2,000, 2,048 10,000 ± ,096 5,000 ± ,192 2,500 ± * Worst case within operational parameters including magnet position and temperature. Timing diagram - Incremental Complementary signals not shown 360 x 4 counts per rev = 1 cycle edge separation RM28SI - - reference impulse leads for clockwise rotation of magnetic actuator. Recommended signal termination For incremental signals + SSI data output lines only - Encoder Customer electronics - - Cable 0 = 120R 120R 10 nf RM28V Linear voltage output lternative for potentiometers Power supply = 5 V ± 5% Power consumption 20 m (not loaded) Output voltage 0 V to Output loading Max. 10 m Nonlinearity 1 % Operating temperature -40 C to +125 C Maximum speed 30,000 rpm Electrical output Output type and electrical variant RM28V Vout φ FS CW V V VC VD CCW VE VF VG VH associate company 7
8 sheet RM28D01_06 RM28 ordering code RM28 IC 08 S 10 Series Output type MD - SSI + Incremental + nalogue sinusoidal, 5 V I - Incremental, open collector, 24 V IE - Incremental, open collector, 5 V IC - Incremental, RS422, 5 V SC - bsolute binary synchro-serial (SSI), RS422, 5 V SI - SSI + Incremental, RS422, 5 V V x - Linear voltage: Linear voltage output 0-5 V, supply 5 V DC CW V V VC VD CCW VE VF VG VH NOTE: Not all combinations are valid. Shape S - Square Special requirements 10 - No special requirements (standard) 18 - Extended operating temperature (see I, IC, IE, SI specifications for details) Resolution counts or positions per revolution counts or positions per revolution counts or positions per revolution (for output type V X only) For output types IC, SC and SI: Decimal inary D D D D D D D * For sample quantities of RM28 supplied with a magnet please add KIT to the end of the required RM28 part number, eg. RM28IC09S10KIT 8
9 Magnetic actuator and magnet ordering information ctuator for integration onto shaft Shaft = Ø*h7 Fixing: Grub screw provided magnet 6 Ø10 Ø*H8 Ø Part numbers: For resolutions up to 9 bit absolute (512 cpr incremental) RM04200 Ø4 mm shaft RM10200 Ø10 mm shaft RM05200 Ø5 mm shaft RM19200 Ø3/16 shaft RM06200 Ø6 mm shaft RM25200 Ø1/4 shaft RM08200 Ø8 mm shaft RM37200 Ø3/8 shaft For resolutions from 10 bit absolute (800 cpr incremental) and above RM04300 Ø4 mm shaft RM10300 Ø10 mm shaft RM05300 Ø5 mm shaft RM19300 Ø3/16 shaft RM06300 Ø6 mm shaft RM25300 Ø1/4 shaft RM08300 Ø8 mm shaft RM37300 Ø3/8 shaft ctuator for integration into shaft magnet Ø8 Part numbers: For resolutions up to 9 bit absolute (512 cpr incremental) RMH06200 For resolutions from 10 bit absolute (800 cpr incremental) and above RMH06300 ± With N-pole marker scribed to a ± 5 accuracy: with N-pole marker Ø6h8 For resolutions up to 9 bit absolute (512 cpr incremental) RMH06202 For resolutions from 10 bit absolute (800 cpr incremental) and above RMH06302 Hole = Ø6G7 Fixing: Glue (recommended LOCTITE 648) Magnet for direct recessing in non-ferrous shafts Ø4 ±0.1 4 ±0.1 Part numbers: For resolutions up to 9 bit absolute (512 cpr incremental) RMM44200 (individually packed) for sample quantities only RMM442C00 (packed in tubes) For resolutions from 10 bit absolute (800 cpr incremental) and above RMM44300 (individually packed) for sample quantities only RMM443C00 (packed in tubes) Fixing: Glue (recommended LOCTITE 648) associate company 9
10 Head office RLS merilna tehnika d.o.o. Cesta II. grupe odredov 25 SI-1261 Ljubljana - Dobrunje Slovenia T F E mail@rls.si Document issues Issue Date Page mendments done New document New layout with outputs I and V x, minor amendments Power consumption for I output type changed to 13 m - New connection images with high resolution data added New layout Hole diameter table added Extended operating temperature range description changed is our worldwide sales support partner for Magnetic Encoders. ustralia T E australia@renishaw.com Germany T E germany@renishaw.com The Netherlands T E benelux@renishaw.com Sweden T E sweden@renishaw.com ustria T E austria@renishaw.com Hong Kong T E hongkong@renishaw.com Poland T E poland@renishaw.com Switzerland T E switzerland@renishaw.com razil T E brazil@renishaw.com Hungary T E hungary@renishaw.com Russia T E russia@renishaw.com Taiwan T E taiwan@renishaw.com Canada T E canada@renishaw.com India T E india@renishaw.com Singapore T E singapore@renishaw.com UK T E uk@renishaw.com The People s Republic of China T E beijing@renishaw.com Israel T E israel@renishaw.com Slovenia T E mail@rls.si US T E usa@renishaw.com Czech Republic T E czech@renishaw.com France T E france@renishaw.com Italy T E italy@renishaw.com Japan T E japan@renishaw.com South Korea T E southkorea@renishaw.com Spain T E spain@renishaw.com For all other countries Please contact RLS head office T E mail@rls.si RLS d.o.o. has made considerable effort to ensure the content of this document is correct at the date of publication but makes no warranties or representations regarding the content. RLS d.o.o. excludes liability, howsoever arising, for any inaccuracies in this document RLS d.o.o.
RMB28 angular magnetic encoder module
sheet RM28D01_07 Issue 7, 14 th May 2014 RM28 angular magnetic encoder module The image does not represent all variants. The RM28 encoder module is designed for direct integration to high volume OEM applications.
More informationRMF44 Magnetic encoder module
sheet Issue 5, 16 th May 2014 RMF44 Magnetic encoder module The image does not represent all variants. The RMF44 is a compact encoder module is designed for easy installation with a self aligning metal
More informationRMB30 angular magnetic encoder module
Data sheet RM30D01_10 Issue 10, 21 st May 2014 RM30 angular magnetic encoder module The image does not represent all variants. The RM30 encoder module provides the functionality of the RM36 encoder in
More informationRM44 magnetic encoder base unit
Issue 3, 14 th January 2009 RM44 magnetic encoder base unit General description System features The RM44 is an encoder designed for integration onto electric motors or other devices for shaft position
More informationRMB30 angular magnetic encoder module
Data sheet RMB30D01_08 Issue 8, 14 th January 2009 RMB30 angular magnetic encoder module The RMB30 encoder module provides the functionality of the RM36 encoder in a component format for simple customer
More informationRE22 series rotary encoders
RED01_01 Issue 1, 13 th January 009 RE series rotary encoders The RE is a compact, high-speed rotary magnetic encoder designed for use in harsh environments. The traditional design allows for easy integration
More informationRM36 series non-contact rotary encoders
Issue 1, 13 th January 2009 RM36 series non-contact rotary encoders The RM36 is a high-speed magnetic rotary encoder designed for use in harsh industrial environments. The non-contact two-part design removes
More informationRMB30 angular magnetic encoder module
RM30D01_11 Issue 11, 3 rd March 2017 RM30 angular magnetic encoder module The image does not represent all variants. The RM30 encoder module provides the functionality of the RM36 encoder in a component
More informationRMB28 / RMF44 angular magnetic encoder modules
RM28D01_12 Issue 12, 27 th July 2018 RM28 / RMF44 angular magnetic encoder modules The images do not represent all variants. The RM28 encoder module is designed for direct integration to high volume OEM
More informationRM08 super small non-contact rotary encoder
Data sheet RM08D01_02 Issue 2, 5 th March 2014 RM08 super small non-contact rotary encoder The RM08 is a compact, super small high speed rotary magnetic encoder designed for use in harsh environments.
More informationAM256Q Angular magnetic encoder IC
AM256Q Angular magnetic encoder IC Features Contactless angular position encoding over 360 Ideal for harsh environments due to magnetic sensing Complete system-on-chip solution 8 bit absolute encoder Output
More informationRMB20 OnAxis TM magnetic encoder module
RMB0D01_1 Issue 1, 6 th October 016 RMB0 Onxis TM magnetic encoder module The RMB0 encoder module provides the functionality of the RM encoder in a compact component format for simple customer integration.
More informationLinACE absolute linear shaft encoder
20 th April 2012 LinACE absolute linear shaft encoder LinACE is an extremely robust absolute linear cylindrical encoder system designed for direct integration into hydraulic, pneumatic, electromechanical
More informationLM13 magnetic ring encoder system
Data sheet LM13D01_04 Issue 4, 5 th May 2011 LM13 magnetic ring encoder system 0.1-1 mm The LM13 is a contactless high-speed magnetic ring encoder designed for use in harsh environments. The LM13 features
More informationRM22 rotary magnetic modular encoder
Data sheet RM22D01_02 Issue 2, 14 th February 2017 RM22 rotary magnetic modular encoder The RM22 is a compact, high-speed rotary magnetic encoder designed for use in harsh environments. The non-contact
More informationRM44 and RM58 rotary magnetic encoders
Data sheet RM44D01_10 Issue 10, 5 th July 2018 RM44 and RM58 rotary magnetic encoders The RM44/RM58 is an encoder designed for integration onto electric motors or other devices for shaft position and rotational
More informationRM08 super small non-contact rotary encoder
Data sheet RM08D01_11 Issue 11, 16 th February 2017 RM08 super small non-contact rotary encoder The RM08 is a compact, sealed, super small, high speed rotary magnetic encoder designed for use in space
More informationLM10 linear magnetic encoder system
Data sheet LM10D01_11 Issue 11, 5 th May 2011 LM10 linear magnetic encoder system 0.1-1 mm Track system The LM10 is a contactless high-speed linear magnetic encoder designed for use in harsh environments.
More informationRMC22 commutation and incremental encoder solution / complementary sinusoidal outputs
Data sheet RMCD01_0 Issue, th pril 015 RMC commutation and incremental encoder solution / complementary sinusoidal outputs The RMCUx is designed for use in motor feedback applications requiring both, B,
More informationRM08 super small non-contact rotary encoder
Data sheet RM08D01_06 Issue 6, 3 rd December 2015 RM08 super small non-contact rotary encoder The RM08 is a compact, sealed, super small, high speed rotary magnetic encoder designed for use in space limited
More informationRM36 series non-contact rotary encoders
Issue 2, 14 th February 2017 RM36 series non-contact rotary encoders The RM36 is a high-speed magnetic rotary encoder designed for use in harsh industrial environments. The non-contact two-part design
More informationLMA10 absolute magnetic encoder system
Data sheet LMA10D01_01 Issue 1, 6 th May 2013 LMA10 absolute magnetic encoder system LMA10 is an absolute magnetic linear encoder system which has been designed for motion control applications as a position
More informationLMA10 absolute magnetic encoder system
Data sheet LM10D01_02 Issue 2, 22 nd pril 201 LM10 absolute magnetic encoder system LM10 is an absolute magnetic linear encoder system which has been designed for motion control applications as a position
More informationRM08 super small non-contact rotary encoder
Data sheet RM08D01_11 Issue 11, 16 th February 2017 RM08 super small non-contact rotary encoder The RM08 is a compact, sealed, super small, high speed rotary magnetic encoder designed for use in space
More informationRMC22 commutation and incremental encoder solution / complementary sinusoidal outputs
RMCD01_06 Issue 6, 6 th March 018 RMC commutation and incremental encoder solution / complementary sinusoidal outputs The RMCUx is designed for use in motor feedback applications requiring both, B, Z incremental
More informationCommutation and incremental magnetic encoder solutions
Data sheet UVWD01_01 Issue 1, 26 th June 2017 Commutation and incremental magnetic encoder solutions Commutation and incremental encoders for motor applications Onxis TM commutation magnetic rotary encoder
More informationAM256 Angular magnetic encoder IC
AM256 Angular magnetic encoder IC Features: Contactless angular position encoding over 360 Ideal for harsh environments due to magnetic sensing Complete system-on-chip solution 8 bit absolute encoder Output
More informationRE36 rotary magnetic shaft encoders
Issue 4, 4 th July 2018 RE36 rotary magnetic shaft encoders The RE36 is a high-speed rotary magnetic encoder designed for use in harsh environments. The traditional design enables easy integration on existing
More informationPRELIMINARY RE36 SERIES MAGNETIC ENCODER
RE6 SERIES MGNETIC EODER The RE6 is a high-speed rotary magnetic encoder designed for use in harsh environments. The traditional design enables easy integration on existing machines. magnet is mounted
More informationAM8192B Angular magnetic encoder IC
AM8192B Angular magnetic encoder IC Features Contactless angular position encoding over 36 13 bit absolute encoder Binary and decimal resolution options Incremental and serial SSI output options High speed
More informationAksIM off-axis rotary absolute encoder
Data sheet MHD01_02 Issue 2, 24 th pril 2013 ksim off-axis rotary absolute encoder ksim is a non-contact high performance off-axis absolute rotary encoder designed for integration into space-constrained
More informationRM36. Rotation sensors RM36 Absolute rotary encoder
Rotation sensors RM36 Absolute rotary encoder RM36 Description The RM36 is a high-speed magnetic rotary encoder designed for use in harsh industrial environments. The non-contact two-part design removes
More informationAM4096 Angular magnetic encoder IC
AM4096 Angular magnetic encoder IC Features Contactless angular position encoding over 360 12 bit absolute encoder Output options: Incremental Serial SSI Serial two wire interface (TWI) UVW commutation
More informationAksIM rotary absolute encoder module
MBD01_03 Issue 3, 5 th ugust 2014 ksim rotary absolute encoder module ksim is a non-contact high performance off-axis absolute rotary encoder designed for integration into space-constrained applications.
More informationLENORD. +BAUER... automates motion. Magnetic absolute rotary encoder GEL 2037 with heavy duty flange or tooth wheel adapter
Magnetic absolute rotary encoder GEL 2037 with heavy duty flange or tooth wheel adapter LENORD +BAUER... automates motion. Technical information Version 01.12 General Multiturn absolute rotary encoders
More informationMagnetic absolute rotary encoder GEL 235 Singleturn, Multiturn up to 28 bits (SSI)
Magnetic absolute rotary encoder GEL 25 Singleturn, Multiturn up to 28 bits (SSI) Technical information version 09.06 Unique Nonius-evaluation Measuring principle: magnetic, high resolution Evaluation:
More informationAM8192B angular magnetic sensor chip
M8192BD1_8 Issue 8, 17 th December 215 M8192B angular magnetic sensor chip The M8192B is a compact solution for angular position sensing. The IC senses the angular position of a permanent magnet placed
More informationOrbis true absolute rotary encoder
Preliminary product information OrbisP01_06 Issue 6, 21 th July 2016 Orbis true absolute rotary encoder Orbis TM is a true absolute rotary encoder suitable for applications where a typical Onxis encoder
More informationWSE22 - Magnetic shaft encoder
WSE22 - Magnetic shaft encoder Based on Dipole Magnet and Hall Sensors WSE22 is a magnetic rotary enclosed encoder with a shaft. It has a precision sensor having an integrated Hall element for scanning
More informationCOMPACT 700 SERIES ENCODERS FOR DRIVES
COMPACT 700 SERIES ENCODERS FOR DRIVES Robustness in tight spaces An encoder is mounted at the rear of a motor and therefore affects the motor s overall length. In tight spaces, the build length can be
More informationLMA10 absolute magnetic encoder system
LM10D01_04 Issue 4, 5 th July 2016 LM10 absolute magnetic encoder system Track system LM10 is an absolute magnetic linear encoder system which has been designed for motion control applications as a position
More informationAgilent AEDA-3300 Series Ultra Miniature, High Resolution Incremental Kit Encoders Data Sheet
Description The AEDA-3300 series are high performance, cost effective, three-channel optical incremental encoder modules with integrated bearing stage. By using transmissive encoder technology to sense
More informationFeatures & Benefits 360, 512, 720, 1000, 1024, 1440, 1800, 2000, 2048, 2880, 3000, 3600, 4000, 4096, 5000, 5120, 6000, 7200, 8000, 8192, 9000, 10000
CP-800/900 Series Size-25 Housed Rotary Optical Encoders Solid or hollow shaft, incremental, sine/cosine, or absolute format Allied Motion s CP800/900 series are size-25 (2.5 in. (63.5mm)) rotary optical
More informationMAGNETIC 2000 SERIES BEARINGLESS ENCODERS FOR LARGE SHAFTS
MAGNETIC 2000 SERIES BEARINGLESS ENCODERS FOR LARGE SHAFTS Low-maintenance for large shafts Certain motors benefit from having the speed feedback sensor mounted directly on the main shaft. A bearingless
More informationLM15 incremental magnetic encoder system
10 630 Data sheet LM15D01_04 Issue 4, 16 th May 018 LM15 incremental magnetic encoder system IP68 0.1 4 mm Track system 318 34 3168 63 6 634 100,000 Distance coded reference The LM15 is a contactless high-speed
More informationInclinometer Selection Guide
POSITION AND MOTION SENSORS Inclinometer Selection Guide Page No. 1 GLOBAL PRESENCE FRABA Group Sales Partner America FRABA Inc. Hamilton, NJ, USA Asia FRABA Pte. Ltd. Singapore Europe POSITAL GmbH Cologne,
More informationCOMPACT 700 SERIES ENCODERS FOR DRIVES
COMPACT 700 SERIES ENCODERS FOR DRIVES Robustness in tight spaces An encoder is mounted at the rear of a motor and therefore affects the motor s overall length. In tight spaces, the build length can be
More informationWSM22 - Magnetic shaft encoder
WSM22 - Magnetic shaft encoder Based on Dipole Magnet and Hall Sensors WSM22 magnetic encoder module consists of a encoder body and a magnet holder. The magnet holder is fitted on the rotating shaft and
More informationBourns Sensors & Controls Model EM14 Brochure
Bourns Sensors & Controls Model EM14 Brochure Sensors & Controls Bourns Model EM14 Product Description Bourns Model EM14 is a self-contained rotary optical encoder. It produces a 2-bit incremental quadrature
More informationAbsolute Encoders - Singleturn
The Sendix 5853 and Sendix 5873 singleturn encoders with SSI or BiSS interface and optical sensor technology can achieve a resolution of max. 7 bits. These encoders are also available with an optional
More informationQR12. Output. A = Line Driver B = Line Driver ABZ/ Open Collector UVW C = Sin/Cos/ Line Driver UVW D = Sin/Cos/Open Collector UVW
QR12 DESIGN FEATURES Low profile assembled height of 0.99" Bearing design simplifies encoder attachment Resolutions up to 20,000 lines per revolution SIN/COS outputs available up to 1250 LC 4, 6 or 8 pole
More informationLM13 linear magnetic encoder system
10 630 Data sheet LM13D02_04 Issue 4, 5 th January 2017 LM13 linear magnetic encoder system 0.1 1 mm 318 324 3168 632 6 634 100,000 Distance coded reference Track system The LM13 is a contactless high-speed
More informationAgilent AEDA-3200-Txx Series Ultra Miniature, High Resolution Incremental Encoders
Agilent AEDA-3200-Txx Series Ultra Miniature, High Resolution Incremental Encoders Data Sheet Features Two channel quadrature output with index pulse Quick and easy assembly using Plug and Play tool Cost-effective
More informationAbsolute Encoders Multiturn
Absolute Encoders Multiturn Functional Safety, optical The absolute multiturn encoders Sendix 5863 SIL and 5883 SIL are perfectly suited for use in safety-related applications up to SIL3 according to DIN
More informationHEAVY DUTY 800 SERIES ENCODER MODELS 841, 850, 855, 861, 862, 865
HEAVY DUTY 800 SERIES ENCODER MODELS 841, 850, 855, 861, 862, 865 Robustness and reliability Are you looking for the most robust, maintenance-free and cost-effective encoder? Then the 800 series is for
More informationThe World of Motion Control
PWB-Ruhlatec Industrieprodukte GmbH Siegburger Str.39a D-53757 Sankt Augustin Germany www.pwb-technologies.com info@pwb-technologies.com ME16 1 of 8 Rev.7.22 / 05.02.2007 Description The ME16 is a reliable
More informationLENORD. +BAUER... automates motion. MiniCoder GEL 2444K Speed and position sensor with metal housing and sin/cos output
MiniCoder GEL 2444K Speed and position sensor with metal housing and sin/cos output LENORD +BAUER... automates motion. Technical information Version 03.3 General The measuring unit comprises a sensor and
More informationAbsolute Encoders Multiturn
The Sendix F36 multiturn with the patented Intelligent Scan Technology is an optical multiturn encoder in miniature format, without gears and with 00% insensitivity to magnetic fields. With a size of just
More informationAbsolute Encoders Singleturn
The absolute singleturn encoders Sendix 5853 SIL and 5873 SIL are perfectly suited for use in safety-related applications up to SIL3 according to DIN EN ISO 6800-5- or PLe to DIN EN ISO 3849. The extra
More informationPWB encoders GmbH Am Goldberg 2 D-99817 Eisenach Germany Phone: +49 3691 72580-0 Fax: +49 3691 72580-29 info@pwb-encoders.com www.pwb-encoders.com 1 of 9 Description The ME22 is a reliable low cost optical
More informationLP12 (1.22 ) Diameter Optical Encoder
Improving the Quality of Life through the Power in Light QPhase LP12 (1.22 ) Diameter Optical Encoder Design Features: Low profile assembled height of 0.816 Bearing design simplifies encoder attachment
More informationAbsolute Encoders - Singleturn
The Sendix 5 and Sendix 7 singleturn encoders with SSI or BiSS-C interface and optical sensor technology can achieve a resolution of max. 7 bits. These encoders are also available with an optional SinCos
More informationThrough-beam ring sensors
Throughbeam ring sensors Features Wide range of sizes: ring diameters of 10, 15 and 20 mm Metal housings Separate evaluation unit Connection by means of S8 connector Degree of protection IP 63 Adjustable
More informationAbsolute encoders - SSI Shaft with clamping or synchro flange Optical multiturn encoders 14 bit ST / 12 bit MT
Features Encoder multiturn / SSI Optical sensing Resolution: singleturn 14 bit, multiturn 12 bit Clamping or synchro flange Electronic setting of zero point Counting direction input Suitable for high positive,
More informationindustry guide Maximum reliability for the most aggressive environments Encoders and motor feedback systems for wind power systems
industry guide Maximum reliability for the most aggressive environments Encoders and motor feedback systems for wind power systems SICK always ready to seize new technologies and make them usable for our
More informationEncoders. Series 21 Hollow-Shaft Rotary Optical Encoders Digital incremental or sine/cosine and absolute format. Features & Benefits.
Digital incremental or sine/cosine and absolute format Allied Motion s Series 21 are cost effective, hollow shaft optical encoders that are easy to mount and provide high data rate capabilities. These
More informationAbsolute encoders - SSI Solid shaft with clamping or synchro flange Optical multiturn encoders up to 14 bit ST / 16 bit MT
Features Encoder multiturn / SSI Optical sensing method Resolution: max. singleturn 14 bit, multiturn 16 bit Clamping or synchro flange Electronic setting of zero point Counting direction input Available
More informationTechnical data. General specifications. Linearity error ± 0.1 Functional safety related parameters MTTF d 700 a at 40 C Mission Time (T M ) L 10
Model Number SYNCHRON SERIELLES INTERFACE Features Solid shaft SSI interface Up to Bit multiturn Free of wear magnetic sampling High resolution and accuracy Additionally push buttons for preset function
More informationAN3134 Application note
Application note EVAL6229QR demonstration board using the L6229Q DMOS driver for a three-phase BLDC motor control application Introduction This application note describes the EVAL6229QR demonstration board
More informationST2111FX HIGH VOLTAGE FAST-SWITCHING NPN POWER TRANSISTOR. Features. Applications. Internal Schematic Diagram. Description.
HIGH VOLTAGE FAST-SWITCHING NPN POWER TRANSISTOR Features NEW SERIES, ENHANCED PERFORMANCE FULLY INSULATED PACKAGE (U.L. COMPLIANT) FOR EASY MOUNTING HIGH VOLTAGE CAPABILITY (1500V) HIGH SWITCHING SPEED
More informationRotary Measurement Technology Absolute Encoders, Multiturn
Mechanical drive Safety-LockTM High rotational speed -40 to 90 C IP Temperature High IP High shaft load capacity Shock/ vibration resistant Magnetic field proof Short-circuit proof Reverse polarity protection
More informationTDA0161. Proximity Detectors. Features. Description. Block Diagram. 10mA Output Current Oscillator Frequency 10MHz Supply Voltage +4 to +35V
Proximity Detectors Features 10mA Output Current Oscillator Frequency 10MHz Supply Voltage +4 to +35V Description These monolithic integrated circuits are designed for metallic body detection by sensing
More informationKeysight Technologies N6850A Broadband Omnidirectional Antenna. Data Sheet
Keysight Technologies N6850A Broadband Omnidirectional Antenna Data Sheet 02 Keysight N6850A Broadband Omnidirectional Antenna - Data Sheet Industries and Applications Spectrum monitoring and signal location,
More informationLENORD. +BAUER... automates motion. GEL 2037 with heavy duty flange or tooth wheel adapter. Technical information Version General.
GEL 2037 with heavy duty flange or tooth wheel adapter LENORD +BAUER... automates motion. Technical information Version 2014-07 General Multiturn absolute rotary encoders with a resolution of up to 25
More informationEC35. Optical Commutation Kit Encoder Page 1 of 7. Description. Mechanical Drawing. Features
Page 1 of 7 Description The EC35 quick assembly optical commutation encoder is designed for high volume, low cost, OEM motion control applications. The EC35 provides A/B/Z incremental outputs and U/V/W
More informationAbsolute encoders - SSI Solid shaft with clamping or synchro flange Optical multiturn encoders up to 14 bit ST / 16 bit MT
Features Encoder multiturn / SSI Optical sensing method Resolution: max. singleturn 14 bit, multiturn 16 bit Clamping or synchro flange Electronic setting of zero point Counting direction input Available
More informationrotary encoder system
L-9517-9466-01-B TONiC DSi dual readhead rotary encoder system DSi brings higher accuracy to rotary axes whilst propoz technology offers a selectable reference mark position. Using two readheads on an
More informationData Sheet MEM 16. Incremental Encoder Magnetic
Incremental Encoder Magnetic PWB encoders GmbH Am Goldberg 2 D-99817 Eisenach Germany Phone: +49 3691 72580-0 Fax: +49 3691 72580-29 info@pwb-encoders.com MEM16IE Rev.2.1 / 15.12.2016 info@pwb-encoders.com
More informationData Sheet AS25/AS50. Absolute / Incremental Singleturn Encoder 18 Bit
Absolute / Incremental Singleturn Encoder 18 Bit PWB encoders GmbH Am Goldberg 2 D-99817 Eisenach Germany Phone: +49 3691 72580-0 Fax: +49 3691 72580-29 info@pwb-encoders.com info@pwb-encoders.com / Description
More informationNOVOHALL Rotary Sensor non-contacting. Series RSC2800 digital SSI, SPI, Incremental
NOVOHALL Rotary Sensor non-contacting Series RSC2800 digital SSI, SPI, Incremental The RSC 2800 sensor utilizes a contactless magnetic measurement technology to determine the measured angle. Unlike conventional
More informationThe World of Motion Control
PWB-Ruhlatec Industrieprodukte GmbH Siegburger Str. 39a 53757 Sankt Augustin Germany www.pwb-technologies.com info@pwb-technologies.com AE30 medium temperature range LD 1 of 9 Rev. 3.0 / 06.07.2007 Description
More informationAbsolute encoders - SSI Solid shaft with clamping or synchro flange Optical multiturn encoders 18 bit ST / 12 bit MT
Features High resolution encoder multiturn / SSI Optical sensing method Resolution: singleturn 18 bit, multiturn 12 bit Electronic setting of zero point Counting direction input Available with additional
More informationBrushless DC-Servomotors with integrated Encoder 4 Pole Technology
rushless DC-Servomotors with integrated Encoder ole Technology mm For combination with Gearheads: F, /, 6 3... X + Encoders 3 ominal voltage Terminal resistance, phase-phase Output power ) Efficiency 3
More informationAutomated Frequency Response Measurement with AFG31000, MDO3000 and TekBench Instrument Control Software APPLICATION NOTE
Automated Frequency Response Measurement with AFG31000, MDO3000 and TekBench Instrument Control Software Introduction For undergraduate students in colleges and universities, frequency response testing
More informationMagnetic Sensor - Incremental / Absolute WMSA50
singleturn sensor magnetic sensing 2port output (absolute + incremental simultaneously) Interface: SSI (synchron serial interface) BiSS (Bidirectional serial synchron) SPI (serial peripheral interface)
More informationBrushless DC-Servomotors with integrated Encoder 4 Pole Technology
rushless DC-Servomotors with integrated Encoder ole Technology 9 mm For combination with Gearheads: /(S),, L, /(S), /(S), /(S)... X + Encoders ominal voltage Terminal resistance, phase-phase Output power
More informationRotary Position Technology
Magnetic Rings LM-2 / RMT-2 High rotational speed IP High IP Shock/vibration resistant Reverse polarity protection Robust Increased ability to withstand vibrations and rough installation: Eliminates machine
More informationFrame through-beam sensors
Frame through-beam sensors Features Wide range of sizes: passage sizes from 25 x 23 mm to 300 x 397.5 mm Metal housings Integrated evaluation unit Connection by means of connector Degree of protection
More informationL9305A DUAL HIGH CURRENT RELAY DRIVER
L9305A DUAL HIGH CURRENT RELAY DRIVER. HIGH OUTPUT CURRENT HYSTERESIS INPUT COMPARATOR WITH WIDE RANGE COMMON MODE OPERATION AND GROUND COMPATIBLE INPUTS INPUT COMPARATOR HYSTERESIS INTERNAL THERMAL PROTECTION
More informationQR12 (1.22 ) Diameter Optical Encoder
Improving the Quality of Life through the Power in Light QPhase QR12 (1.22 ) Diameter Optical Encoder Design Features: Low profile assembled height of Bearing design simplifies encoder attachment Resolutions
More informationProduct Overview. Rotary Encoders with Optimized Scanning
Product Overview Rotary Encoders with Optimized Scanning November 2006 Rotary encoders for electrical drives are subject to high requirements: they are expected to function reliably and provide dependable
More informationUltraminiature Rocker&Lever Switches V ac or dc
Specifications: Contact Rating Mechanical Life Contact Resistance Minimum Insulation Resistance Dielectric Strength Operating Temperature Materials: Case and Bushing Switch Support Contacts/Terminals :
More informationMagnetic Position Sensors
Magnetic Position Sensors Light Sensors Sensor Driven Lighting NFC/HF RFID Audio Lightning Sensor Position Sensors Sensor Interfaces UHF RFID RF Transmitters & Receivers Power Management Lighting Management
More informationDS-70. Absolute position, rotary Electric Encoder
DS-70 Data Sheet, V 2.0,Nov. 2012 DS-70 Absolute position, rotary Electric Encoder The DS-70 is a member of the DS series of Electric Encoders, based on Netzer Precision proprietary technology. These encoders
More informationTECHNICAL DATASHEET Absolute Encoder AC 36 - BiSS / SSI
Overall length: 36 mm For equipment engineering and industry Up to 22 Bit Resolution Singleturn + 12 Bit Multiturn Solid or hollow shaft version available +100 C operating temperature 10,000 rpm (continuous)
More informationObsolete Product(s) - Obsolete Product(s)
ST8812FP HIGH VOLTAGE FAST-SWITCHING NPN POWER TRANSISTOR Features HIGH VOLTAGE CAPABILITY VERY HIGH SWITCHING SPEED TIGHT hfe CONTROL LARGE R.B.S.O.A. FULLY INSULATED PACKAGE U.L. COMPLIANT FOR EASY MOUNTING
More informationDS-58[20] Absolute position, rotary Electric Encoder
DS-58[20] Data Sheet, V 2.0b,June. 2013 DS-58[20] Absolute position, rotary Electric Encoder The DS-58[20] is a member of the DS series of Electric Encoders, based on Netzer Precision proprietary technology.
More informationProgrammable Pulse Generators PSPL10050A, PSPL10060A, PSPL10070A Datasheet
Programmable Pulse Generators PSPL10050A, PSPL10060A, PSPL10070A Datasheet Applications University education and research UWB signal source Semiconductor characterization Laser driver The PSPL10000 Series
More informationED-17 Serial Output Magnetic Encoder
9-bit absolute encoder Serial SSI interface IP52 sealing Ball bearing Excellent stability no optic degradation Custom housings, shafts, connectors available in most cases with little tooling costs DESCRIPTION
More informationRGH45 encoder system. Data sheet L A. Uses RTLR40 and RTLR40-S highaccuracy. steel tape scale. Unique filtering optics and DC light servo
L91793701A Renishaw s RGH readhead offers all the benefits of the market proven RG linear encoder system highspeed, noncontact performance with filtering optics to guarantee reliable performance over dirt,
More information