LTE B3/B7 BAW Diplexer (75MHz/7MHz) Product Overview The is a high performance Bulk Acoustic Wave (BAW) Duplexer designed for Band 3 uplink and Band 7 uplink applications. The provides low insertion loss and high rejection, making it an ideal choice for Small Cells. This duplexer is housed in a compact, RoHs compliant 3. mm x 3. mm x.91 surface mount pacakge (SMP). The is part of Qorvo s extensive portfolio of RF BAW and SAW filters. Functional Block Diagram Pin Configuration Pin No. GND ANT In GND 2 3 Label 1, 3, 5 Ground 2 ANT In Top View 4 Band 7 Uplink Out 6 Band 3 Uplink Out 1 6 5 4 B3 UL Out GND B7 UL Out 6 Pad 3. mm x 3. mm x.91 mm SMP Key Features 75 MHz Bandwidth Band 3 UL 7 MHz Bandwidth Band 7 UL High Attenuation Low Loss No External Matching Required Single Input, Dual Output Operation Small Size: 3. mm x 3. mm x.91 mm Surface Mount Package (SMP) RoHS Compliant, Pb-Free Applications LTE Band 3 / Band 7 Uplink Diplexer Infrastructure Base Station Infrastructure Small Cells Repeaters Routers LTE Dongles General Purpose Wireless Ordering Information Part No. SB SR TR7 EVB Description 5 filter modules (loose) 1 pieces on a 7 reel 2,5 pieces on a 7 reel (standard) Evaluation Board Data Sheet March 24, 217 Subject to change without notice 1 of 12 www.qorvo.com
Absolute Maximum Ratings Parameter Rating Storage Temperature 4 to +125 C Operation Temperature 4 to +85 C Life Test Conditions TBD TBD Rating > TBD Typ hours > TBD hours Electrical specifications are measured at specified test conditions. Electrical Specifications B3 Uplink (1) Test conditions unless otherwise specified. Temperature Range: 4 to +85 C Parameter Conditions (1, 2) Min Ty p Max Unit Insertion Loss (2) 171 1785 MHz - 2.4 3.6 Amplitude Variation (3) 171 1785 MHz - - 2.2 Input / Output Return Loss 171 1785 MHz 8 - - Group Delay Variation 171 1785 MHz (+25 C) - - 4 ns 171 1785 MHz - - 55 ns 171 1785 MHz (5MHz sliding window) - - 3 ns Attenuation (4) 5 72 MHz 27 - - 72 167 MHz 27 - - 167 169 MHz 17 - - 185 1825 MHz 32 - - 1825 188 MHz 44 - - 188 192 MHz 3 - - 192 211 MHz 4 - - 211 217 MHz 33 - - 217 25 MHz 24 - - 25 269 MHz 26 - - 269 38 MHz 9 - - 38 5 MHz 2 - - Notes: 1. All specifications are based on the QORVO schematic for the main reference design. 2. Maximum Insertion Loss within defined frequency range. 3. Amplitude Variation is defined as the difference between the lowest loss and the highest loss within 1 MHz channels. 4. Attenuation is referenced to zero Data Sheet March 24, 217 Subject to change without notice 2 of 12 www.qorvo.com
Electrical Specifications B7 Uplink (1) Test conditions unless otherwise specified. Temperature Range: 4 to +85 C Parameter Conditions (1, 2) Min Ty p Max Unit Insertion Loss (2) 25 257 MHz - 2.3 3.8 Amplitude Variation (3) 25 257 MHz - 1.5 2.3 Input / Output Return Loss 25 257 MHz 8 - - Group Delay Variation Attenuation (4) 25 257 MHz (+25 C) - - 2 ns 25 257 MHz - - 4 ns 25 257 MHz (5MHz sliding window) - - 3 1 11 MHz 35 - - 11 171 MHz 3 - - 171 188 MHz 36 - - 188 217 MHz 3 - - 217 226 MHz 32 - - 226 245 MHz 31 - - 245 248 MHz 12 - - 259 262 MHz 1 - - 262 269 MHz 39 - - 269 29 MHz 32 - - 29 38 MHz 25 - - 38 5 MHz 13 - - Notes: 1. All specifications are based on the QORVO schematic for the main reference design. 2. Maximum Insertion Loss within defined frequency range. 3. Amplitude Variation is defined as the difference between the lowest loss and the highest loss within 1 MHz channels. 4. Attenuation is referenced to zero Electrical Specifications Isolation (1) Test conditions unless otherwise specified. Temperature Range: 4 to +85 C Parameter Conditions (1, 2) Min Ty p Max Unit Isolation 171 1785 MHz 39 - - 25 257 MHz 33 - - Notes: 1. All specifications are based on the QORVO schematic for the main reference design. Data Sheet March 24, 217 Subject to change without notice 3 of 12 www.qorvo.com
EVB Evaluation Board Bill of Material EVB Reference Des. Value Description Manuf. Part Number U1 n/a Qorvo SMA n/a SMA connector Amphenol 91-1-44-6RFX PCB n/a 3-Layer Multiple 96562 Data Sheet March 24, 217 Subject to change without notice 4 of 12 www.qorvo.com
Performance Plots Band 3 Uplink Test conditions unless otherwise noted: Temp= +25 C B3 Uplink Frequency Response -1-2 -3-4 -5-6 -7 156 1635 171 1785 186 1935 B3 Uplink Wideband Response B3 Uplink Passband Response -1-2 -3-4 -5-6 -7-8 -9-1 1635 166 1685 171 1735 176 1785 181 1835 186 B3 Uplink Return Loss -1-2 -3-4 -5-5 -1-15 -2-6 1 2 3 4 5 6 Ant Port Impedance -25 1635 166 1685 171 1735 176 1785 181 1835 186 B3 Uplink Port Impedance Data Sheet March 24, 217 Subject to change without notice 5 of 12 www.qorvo.com
Performance Plots Band 7 Uplink Test conditions unless otherwise noted: Temp= +25 C B7 Uplink Frequency Response -1-2 -3-4 -5-6 -7 236 243 25 257 264 271-1 -2-3 -4-5 B7 Uplink Wideband Response B7 Uplink Passband Response -1-2 -3-4 -5-6 -7-8 -9-1 243 2465 25 2535 257 265 264-5 -1-15 -2-25 -3 B7 Uplink Return Loss -6 1 2 3 4 5 6 Ant Port Impedance -35 243 2465 25 2535 257 265 264 B7 Uplink Port Impedance Data Sheet March 24, 217 Subject to change without notice 6 of 12 www.qorvo.com
Performance Plots Isolation Test conditions unless otherwise noted: Temp= +25 C Antenna Return Loss -5-1 -15-2 -25-3 -35 1515 1765 215 2265 2515 2765-1 -2-3 Isolation -4-5 -6-7 1515 1765 215 2265 2515 2765 Data Sheet March 24, 217 Subject to change without notice 7 of 12 www.qorvo.com
Package Dimensions ` Notes: 1. All dimensions are in millimeters. Angles are in degrees. 2. Dimension and tolerance formats conform to ASME Y14.4M-1994. 3. The terminal #1 identifier and terminal numbering conform to JESD 95-1 SPP-12. Data Sheet March 24, 217 Subject to change without notice 8 of 12 www.qorvo.com
Package Marking Package Marking Qorvo Logo Product Identifier: 1237 Trace Code: XXXX PCB Mounting Pattern Notes: 1. All dimensions are in millimeters. Angles are in degrees. 2. This drawing specifies the mounting pattern used on the Qorvo evaluation board for this product. Some modification may be necessary to suit end user assembly materials and processes. Data Sheet March 24, 217 Subject to change without notice 9 of 12 www.qorvo.com
Tape and Reel Information Carrier and Cover Tape Dimensions Tape and reel specifications for this part are also available on the Qorvo website. Standard T/R size = 25 pieces on a 7 reel. Feature Measure Symbol Size (in) Size (mm) Length A.132 3.35 Cavity Width B.132 3.35 Depth K.51 1.3 Pitch P1.157 4. Cavity to Perforation - Length Direction P2.79 2. Centerline Distance Cavity to Perforation - Width Direction F.138 3.5 Cover Tape Width C.213 5.4 Carrier Tape Width W.315 8. Data Sheet March 24, 217 Subject to change without notice 1 of 12 www.qorvo.com
Tape and Reel Information Reel Dimensions Tape and reel specifications for this part are also available on the Qorvo website. Standard T/R size = 2,5 pieces on a 7 reel. Feature Measure Symbol Size (in) Size (mm) Diameter A 6.969 177. Flange Thickness W2.559 14.2 Space Between Flange W1.346 8.8 Outer Diameter N 2.283 58. Hub Arbor Hole Diameter C.512 13. Key Slit Width B.79 2. Key Slit Diameter D.787 2. Data Sheet March 24, 217 Subject to change without notice 11 of 12 www.qorvo.com
Handling Precautions Parameter Rating Standard ESD Human Body Model (HBM) Class TBD ESDA / JEDEC JS-1-212 ESD Charged Device Model (CDM) Class TBD ESDA / JEDEC JS-2-214 MSL Moisture Sensitivity Level Level 3 IPC/JEDEC J-STD-2 Caution! ESD-Sensitive Device Solderability Compatible with both lead-free (26 C max. reflow temp.) and tin/lead (245 C max. reflow temp.) soldering processes. Solder profiles available upon request. Contact plating: TBD RoHS Compliance This part is compliant with 211/65/EU RoHS directive (Restrictions on the Use of Certain Hazardous Substances in Electrical and Electronic Equipment) as amended by Directive 215/863/EU. This product also has the following attributes: Lead Free Halogen Free (Chlorine, Bromine) Antimony Free TBBP-A (C15H12Br42) Free PFOS Free SVHC Free Pb Contact Information For the latest specifications, additional product information, worldwide sales and distribution locations: Web: www.qorvo.com Tel: 1-844-89-8163 Email: customer.support@qorvo.com For technical questions and application information: Email: appsupport@qorvo.com Important Notice The information contained herein is believed to be reliable; however, Qorvo makes no warranties regarding the information contained herein and assumes no responsibility or liability whatsoever for the use of the information contained herein. All information contained herein is subject to change without notice. Customers should obtain and verify the latest relevant information before placing orders for Qorvo products. The information contained herein or any use of such information does not grant, explicitly or implicitly, to any party any patent rights, licenses, or any other intellectual property rights, whether with regard to such information itself or anything described by such information. THIS INFORMATION DOES NOT CONSTITUTE A WARRANTY WITH RESPECT TO THE PRODUCTS DESCRIBED HEREIN, AND QORVO HEREBY DISCLAIMS ANY AND ALL WARRANTIES WITH RESPECT TO SUCH PRODUCTS WHETHER EXPRESS OR IMPLIED BY LAW, COURSE OF DEALING, COURSE OF PERFORMANCE, USAGE OF TRADE OR OTHERWISE, INCLUDING THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. Without limiting the generality of the foregoing, Qorvo products are not warranted or authorized for use as critical components in medical, life-saving, or life-sustaining applications, or other applications where a failure would reasonably be expected to cause severe personal injury or death. Copyright 217 Qorvo, Inc. Qorvo is a registered trademark of Qorvo, Inc. Data Sheet March 24, 217 Subject to change without notice 12 of 12 www.qorvo.com