ITEM PG. bout riney...2 Shank ata...3 Shrink Fit enefits...4 Shrinker dvantages...5 Induction Heating Units...6 Thermax & ccessories...7-8 Tru-Therm & ccessories...9-10 Induction Unit hanging System...11 Induction Heating Units...11 Induction Machine ccessories...12 ooling evices...13 Shrinker Tooling...14 40 V-Flange Tooling...15 50 V-Flange Tooling...16 40 T Flange Tooling...17 50 T Flange Tooling...18 HSK32 Tooling...19 HSK32 Tooling...20 HSK32E Tooling...21 HSK63 Tooling...22 HSK63 Tooling...23 HSK63E Tooling...24 HSK63SF Tooling...25 HSK100 Tooling...26 HSK100 Tooling...27 epth Setting Units...28 Locking Rings...29 Micrometer Head...29 Induction Spacer Rings...30 HSK oolant Tubes...31 Installation Wrenches for oolant Tubes...31 oolant Thru ore Tooling...32 Precision N Toolholding...33 Recommended Machine Start-up Tooling Packages...34-35 Eccentric ore Toolholders....36-37 Ordering oolant Thru Face Tooling...38 High Speed alanced Tooling...38 alance Information Tru Velocity & Maximum Velocity...39 V40 End Mill dapters Stub Length...40 V40 End Mill dapters ST. Length...40 V40 End Mill dapters Int. Length...40 V40 End Mill dapters Ext. Length...40 V40 Metric End Mill dapters...41 V40 Morse Taper dapters...41 V40 Jacobs Taper dapters...41 V40 ouble ngle ollet hucks...41 V40 riney Flex ollet hucks...42 V40 TG ollet hucks...42 V40 Ultra Precision ollet hucks (ER)...42 V40 oring Head dapters...43 V40 lank ars...43 V40 Precision Test ar...43 V40 Shell Mill dapters...44 V40 Ext. Length Shell Mill dapters...44 V40 Stub rbor Screw Type dapters...44 V40 Stub rbor Nut Type...44 V45 End Mill dapters Upon Request...45 V50 End Mill dapters Stub Length...46 V50 End Mill dapters Std. Length...46 V50 End Mill dapters Ext. Length...47 V50 End Mill dapters Extra Ext....47 riney INEX V50 Metric End Mill dapters...48 V50 Morse Taper dapters...48 V50 Jacobs Taper dapters...48 V50 ouble ngle ollet hucks...48 V50 riney Flex ollet hucks...49 V50 TG Style ollet hucks...49 V50 Ultra Precision ollet hucks (ER)...49 V50 oring Head dapters...50 V50 lank ars...50 V50 Precision Test ar...50 V50 Shell Mill dapters Std. Length...51 V50 Stub rbor Screw Type...51 V50 Stub rbor Nut Type...51 T30 End Mill dapters...52 T30 Jacobs Taper dapters...52 T30 TG ollet hucks...52 T30 Ultra Precision ollet hucks (ER)...53 T30 Shell Mill dapters...53 T35 End Mill dapters Upon Request...53 T40 End Mill dapters Stub Length...54 T40 End Mill dapters Std. Length...54 T40 End Mill dapters Ext. Length...54 T40 Morse Taper dapters...55 T40 Jacobs Taper dapters...55 T40 ouble ngle ollet hucks...55 T40 riney Flex ollet hucks...56 T40 TG ollet hucks...56 T40 Ultra Precision ollet hucks (ER)...56 T40 lank ars...57 T40 Precision Test ars...57 T40 Shell Mill dapters...57 T50 End Mill dapters...58 T50 Morse Taper dapters...58 T50 Jacobs Taper dapters...58 T50 TG ollet hucks...59 T50 Ultra Precision ollet hucks (ER)...59 T50 lank ars...59 T50 Precision Test ars...60 T50 Shell Mill dapters...60 NMT Q 30 End Mill dapters Standard Length...61 NMT Q 30 Jacobs Taper dapters...61 NMT Q 30 ouble ngle ollet hucks...61 NMT Q 30 TG Style ollet hucks...62 NMT Q 30 Shell Mill dapters...62 NMT Q 40 End Mill dapters...63 NMT Q 40 Morse Taper dapters...63 NMT Q 40 Jacobs Taper dapters...63 NMT Q 40 TG Style ollet hucks...64 NMT Q 40 Shell Mill dapters...64 NMT Q 50 End Mill dapters...65 NMT Q 50 Morse Taper dapters...65 NMT Q 50 Jacobs Taper dapters...65 NMT Q 50 TG Style ollet hucks...66 NMT Q 50 Shell Mill dapters...66 HSK...67 HSK Technical ata...68 HSK 63 End Mill dapters...69 HSK 100 End Mill dapters...69 HSK 63 R ollet huck dapters...70 HSK 100 R ollet huck dapters...70 HSK 63 Shell Mill dapters...70 HSK 100 Shell Mill dapters...70 HSK oolant Tubes...71 HSK oolant Tube Wrenches...71 Tightening Fixtures...72 Locking Tightening Fixture...72 Shell Mill Screws...73 Shell Mill rive Keys...73 End Mill Set Screws...73 Stop Screws...74 Stub rbor Nuts...74 Stub rbor Spacer Sets...74 Stub rbor Nut Spacer Sets...74 Tool Storage Units & ccessories...75 SpindleMate leaner Kits...76 ILZ V Flange Tap Holders T/...77-78 ILZ T Flange Tap Holders T/...78 ILZ NMT Flange Tap Holders T/...78 ILZ Straight Shank Tap Holders T/...78 ILZ V Flange Tap Holders Rigid...79 ILZ T Flange Tap Holders Rigid...79 ILZ NMT Flange Tap Holders Rigid...79 ILZ Straight Shank Tap Holders Rigid...79 ILZ Tap dapters Positive rive...80 ILZ Tap dapters Torque ontrol...80 riney V Flange Tap Holders T/...81 riney T Flange Tap Holders T/...81 riney NMT Flange Tap Holders T/...81 riney Straight Shank Tap Holders T/...81 riney V Flange Tap Holders Rigid...82 riney T Flange Tap Holders Rigid...82 riney Straight Shank Tap Holders Rigid...82 riney Tap dapters Positive rive...83 riney Tap dapters Torque ontrol...83 Tap Holder Shanks...84 Tapping Head Holders...84 Tap Extensions...85 Straight Shank End Mill dapters...86 Straight Shank Shell Mill dapters...86 ouble ngle ollet Extensions...87 ouble ngle ollet Nuts...87 ouble ngle Wrenches...87 TG ollet Extension...88 TG ollet Nuts...88 TG Wrenches...88 riney Flex ollet Extensions...89 riney Flex ollet Nuts...89 riney Grip ollet Nuts...89 F Wrenches & G Wrenches...89 Ultra Precision ollet Extensions (ER)...90 Ultra Precision ollet Nuts (ER)...90 Ultra Precision Wrenches (ER)...90 Jacobs Plain earing hucks...91 Jacobs all earing hucks...91 Jacobs High Precision Keyless all earing hucks...92 Jacobs High Torque/High Precision Keyless all earing hucks...92 ouble ngle ollets ()...93 TG075 ollets (TG)...94 TG100 ollets (TG)...94 TG150 ollets (TG)...94 riney Flex ollets...95 Ultra Precision ollets (ER)...96-97 Retention Knobs nsi & incinnati...98 Retention Knobs ISO & JMT...99 Retention Knobs Machine Index...100-102
riney bout riney riney is an ISO 9001-certified Michigan based privatelyowned corporation with a dedicated commitment to quality from the corporate executives, managing staff, and the entire highly-skilled work force. riney operates two shifts and employs approx. 100 people, all committed to serving the merican machining industry and the world market. riney uses the Quality Team manufacturing philosophy, implementing the best ideas from all levels of the company, thus producing quality products and new innovative manufacturing ideas and tooling designs. SELETION Look to riney for the most complete line of tooling for your N machining center or your manual milling machine: V Flange Shank 30, 40, 45, 50; T Shank 30, 35, 40, 50; NMT(Q) Shank 30, 40, 50; QSwitch 100, 200, 300, 400 and Qhange; Straight Shank tools; ilz Quick hange Tapping systems for all shank styles; riney Quick hange Synchronized Tapping systems (for rigid tapping machines with coolant thru spindles); Jacobs rill hucks, and the most complete line of collet systems available in the industry. TG, ER,, and riney Flex, collets are available from stock in all the popular sizes. You can count on riney to have the tools you need for any machine style, in stock for immediate delivery. QULITY Shank quality is the key to machining accuracy. riney shanks and bores are ground on state-of-the-art N grinding equipment, enabling riney to provide the most accurate shank and concentricity in the industry. ll shanks are traverse-ground to T3 NSI tolerance (.001 taper per ft.) and inspected with the latest, most accurate air/electronic dedicated gaging system. Toolholder I..s (collet chuck tapers, end mill adapters, etc.) are traverse-ground on N I grinders under simulated operating conditions. This enables riney to offer size repeatability and concentricity of.0002 or less from the tool shank to the bore. ll grinding operations are closely monitored to ensure the highest quality and consistency in the industry. The result of these quality features is superior performance, longer tool life, increased speeds and feed rates, and better surface finish resulting in lower operating costs. Materials used for all riney Tooling are certified and traceable to NIST standards. With in-plant heat treating, riney controls the carbonizing and hardening process to ensure all tools have a.050 minimum case depth to maximize tool life and reduce distortion from prolonged use, mishaps, and mishandling. Shanks are ground after black-oxide to guarantee the best concentricity, superior finish, and better spindle contact. The critical grinding process is the last operation. This eliminates any distortion by heat treating or changing surface conditions of the tool. These conditions will affect the concentricity or cause the tool to be difficult for your toolchanger to operate. oth deeper case hardening and superior shank accuracy extend tool life, providing superior quality and superior value. SPEIL TOOLING ount on riney to manufacture your special tooling requirements to the same high quality as standard riney products. Just fax your requirements to 1-989-269-9559, and you will receive a prompt quotation on your requirements. Our design team will provide a computer designed print for your approval before manufacturing to insure tooling is manufactured precisely to your specifications. LNE TOOLING riney leads the industry with the most complete line of high quality balanced tools. hoose the tooling to match your machining speeds. While the improved design of our standard tooling will perform well in most machining applications, for higher spindle speeds choose our Tru Velocity TM (TV) tooling. riney s Tru Velocity line is balanced to 20,000 RPM. For even higher speeds, riney s Maximum Velocity TM (MV) tooling is fully balanced and designed to perform up to speeds of 30,000 RPM. lso available from riney is alanced Engineered tooling for ultra high-speed applications you choose the speed, and we ll balance to it. Whatever your balanced tooling needs, riney is your choice for tooling. 2
riney SHNK T SHNK SIZE V30 V40 V45 V50 GGE LINE 1.250 1.750 2.250 0 1.812 0 3.250 3.875 1.875 2.687 3.250 0 1/2-13 5/8-11 3/4-10 1-8 V FLNGE SHNKS SHNK SIZE GGE LINE *T30 *T35 T40 T50 1.250 1.500 1.750 0 1.985 2.299 2.654 4.126.787.866.984 1.378 1.811 2.087 2.480 3.937 M12 M12 M16 M24 NOTE: Made to JIS 6339-1992 Specifications (equivalent to ISO 7388/1-1983) *.4920 pilot for pull stud E T SHNKS SHNK SIZE GGE LINE NMT OR QUIK HNGE SHNKS NMT or Q30 NMT or Q40 NMT or Q50 1.250 1.750 0 3.75 5.12 1/2-13 5/8-11 1-8 3
riney SHRINKER TOOLING ENEFITS For critical high speed or high precision cutting applications, the Shrinker's TIR and tremendous holding strength are benefit enough most toolholders simply can't achieve this degree of precision. Shrinker technology and design provides these benefits: est possible TIR (Total Indicator Reading). est possible balance. est available gripping power. Increased tool and spindle life. Fastest tool change in seconds! Thin profile holders for machining hard-to-reach places. esign and build custom holders for any application. Short gage lengths available for increased rigidity. bility to preset for required tool length. Ideal for end milling, drilling, reaming, boring and all other critical rotary tool applications regardless of cutting tool material. Eliminates wrenches, collets, set screws and other accessories. Reduces costs associated with tool changes, holder maintenance and machine downtime. HOW IT WORKS: The concept is simple. Each Shrinker toolholder is manufactured with an inside diameter slightly smaller than the shank diameter of the cutting tool. heat induction unit is used to quickly heat the holder end of the Shrinker, expanding this inside diameter. t this point, the tool shank slips easily into the holder. s the holder cools, the resulting thermal contraction exerts a tremendous, uniform pressure around the entire surface of the tool shank. No moving parts... no accessories... just total concentric gripping strength. Heat expands the inside diameter. ooling contracts the inside diameter. Removing the tool is just as simple you simply reverse the process! Tool changes can be accomplished in seconds, dramatically increasing machining productivity by reducing tool change downtime. 4
SUPERIOR ONENTRIITY - The concentricity of Shrink Fit Tooling is guaranteed.0002 or better with the cutting tool set in the shrunk condition. SUPERIOR LNE - Shrink Fit Tools are manufactured for high speed operation. alance pockets are machined in the drive keys on all V-Flange tooling, eliminating the inherent imbalance in V-Flange tooling. Shrink Fit tools are dynamically balanced on our Hoffman 2 plane balancing machine to G 2.5 at 20,000 RPM's. Special tools have been manufactured at a G 1.0 tolerance at 40,000 RPM. This results in balanced chip loads, better finishes, and increased speeds and feed rates. With no set screws and no moving parts, the toolholder remains in balance leaving the cutting tool as the only variable. SUPERIOR RIGIITY - The average gripping force imposed on the shank of the cutting tool is 10,000 lbs. more than 5 times that of collet, milling, or hydraulic chucks. It would take over 100 horsepower in order to turn the tool within the bore of the toolholder. n additional advantage is the shank of the tool is gripped 360 degrees the entire length of the bore. Impossible with milling chucks and hydraulic chucks. These chucks leave an area of up to 1/4 inch from the end of the toolholder with no force applied to the tool shank. Using the Shrinker gives you the closest possible rigidity to an Integral Shank Tool with lower costs and more flexibility. SUPERIOR TOOL LIFE - The Shrinker Toolholding System extends tool life up to 100% or more. With the superior holding force, concentricity, and balance, the chip load is evenly distributed on the cutting edge. The rigidity established with the Shrinker enables cutting tool technology to be pushed to the maximum. SUPERIOR HIGH SPEE OPERTION - In extreme high speed operations centrifical force becomes an important factor in desired speeds and feed rates. With the holding force induced by the Shrinker system being superior, no other system can meet and maintain the clamping force. The Shrinker System is a must in extreme high speed applications and is superior at any speed. very important feature of alanced Shrinker Tooling is the extended spindle life with the superior balance and rigidity the Shrinker offers. SUPERIOR OPERTING PRMETERS - No holding system offers shorter extension length capability with concentricity of.0002 or less. Milling and hydraulic chucks offer excellent concentricity, but the mechanical clamping system requires additional extension and sacrifices rigidity. onventional end mill holders can provide very short extension lengths, but sacrifice concentricity and provide 2 or 3 point clamping. The thin profile required for the Shrinker enable the operations to be performed with less interference. Tooling can be preset by simply controlling the depth the shank extends into the bore. SIMPLE OPERTION - The Shrinker System is truly the easiest system to use. The induction tool changer is by far the fastest and simplest method to change tooling. The average induction cycle takes 7 seconds to expand the bore, enabling the operator to remove the dull tool and insert the new tool. Seconds after the new tool is inserted, the bore shrinks back and can then be cooled. No wrenches to find, no vices, uniform chucking without torque wrenches, and faster than conventional clamping methods. ONLUSION - The Shrinker Thermo ontraction Toolholding System is by far the most economical system in the world today. The increased productivity and increased tool life can be measured. dditionally, reduced toolchange down time will contribute to the considerable reduction in costs. riney SHRINKER VNTGES 5
INUTION UNIT riney INUTION HETING UNITS INUTION HETING UNITS TTIU-075-220................ 7-8 TT-075-220..................9-10 TI 10/10 N12.............. 11-12 ooling evices.................13 TT-075-220 TTIU-075-220 TI 10/10 N12 6
THERMX riney INUTION HETING UNITS The riney THERMX Heat Shrink Unit opens the door to professional grade Shrinker tooling technology. This system offers; 7.5 kw output power operating at 20-25 khz, minimum 30% duty cycle, superior coil efficency, and operating consistency. Safety features are also built in: overcurrent, overvoltage, overtemperature protection, which distinguishes riney THERMX. INUTION UNIT Foolproof operation is designed into THERMX. hoose the coil that fits the toolholder nose, insert into the vertical slide, lower slide, and press the carbide or steel keyswitch on the simple control panel. The PL manages the preprogrammed cycle from there. Toolholder bores expand in seconds to permit insertion or removal of the cutting tool. oil retracts automatically after heating cycle is complete. ooling is accomplished rapidly with the most efficient fans available conveniently integrated into the base. So you can prepare several tools at a time. Tool capacity range from.125 - in. (3mm - 25mm), 18.75 in length. THERMX is also provided with your choice of 5 different heat sinks for high-efficiency cooling, 4 heating coils and a cooling sleeve. Protection from overheating of toolholder with timed cycles. THERMX ESSORIES THERMX INUTION HETING UNIT NUMER ESRIPTION TTIU - 075-220 Vertical unit with 220V/3 phase power requirement. INUTION UNIT SE POT NUMER -LR-SE 5.875 4.75 7
INUTION UNIT riney THERMX ESSORIES TPERE HOLER RING NUMER LR - V40 LR - HSK32 LR - HSK40 LR - HSK50 LR - HSK63 LR - HSK80 HET SINK NUMER o -IR-012.883.750 6 +/-.25 o -IR-018.946.813 6 +/-.25 o -IR-025, 6M 8.875 6 +/-.25 o -IR-031 1.071.938 6 +/-.25 o -IR-038, 8M,10M 1.133 0 6 +/-.25 o -IR-044 1.188 1.057 6 +/-.25 o -IR-050, 12M 1.258 1.125 6 +/-.25 o -IR-062, 14M, 16M 1.383 1.250 6 +/-.25 o -IR-075, 18M, 20M 1.508 1.340 6 +/-.25 o -IR-088 1.633 1.460 6 +/-.25 o -IR-100, 25M 1.758 1.590 6 +/-.25 o -IR-125, 32M 8 1.800 6 +/-.25 o -IR-150 2.258 2.040 6 +/-.25 o -IR-200 8 0 6 +/-.25 o -IR-6M, 8M 1.071.787 9 +/-.25 o -IR-10M, 12M 1.268.945 9 +/-.25 o -IR-14M, 16M 1.347 1.063 9 +/-.25 o -IR-18M, 20M 1.662 1.300 9 +/-.25 o -IR-25M, 32M 2.095 1.733 9 +/-.25 o o o o o o o o o o o o o o o o o o o OOLING SLEEVE NUMER -IR-HOUSING 9.75 4.75 8
TRU-THERM riney INUTION HETING UNIT ENHNE ONTROL - This high quality power supply provides more than ample power for shrink-fit heating applications. With 7.5 kw, cutting tool sizes can range from 3/16 through 1.500 with HSS in sizes larger than 3/8. INUTION UNIT With its water cooled induction coils it offers unmatched durability. The water flow allows for the use of copper coils for the induction coil. These coils are far more efficient and several times more durable than the wrapped wire coils. This system also features a four station tool holder chilling unit built right into it. It uses an enclosed circulating coolant system to quickly draw the heat from the tool holder. With the quick-change removable cooling sleeves, you can switch size to match your cooling needs in seconds. Touch screen programming guides the operator through the tool change cycle. It is designed for 100% duty cycle. INUTION HETING UNIT NUMER TT - 075-220 ESRIPTION Vertical unit with 220V/3 phase power requirement. INUTION HETING UNIT ESSORIES INUTION OILS FOR VERTIL UNIT NUMER I - 1.19 I oil I - 1.45 I oil I - 1.71 I oil I - 2.07 I oil To hange 3/16, 1/4, and 3/8 tools To hange 1/2 and 5/8 tools To hange 3/4 and 7/8 tools To hange 1 and 1 1/4 tools 9
INUTION UNIT riney INUTION HETING UNIT ESSORIES INUTION PTERS N REUERS NUMER TI HSK63-HSK40R TI V50-V40R TI V50-HSK40R PTS TO From HSK 63 to HSK 40 From V50 to V40 From V50 to HSK 40 OOLING EVIES TIIPS-11 Single aluminum cooling blocks to dissipate the heat from the toolholder. The interior diameter is tapered to match taper on O.. of toolholder. The toolholder uses conduction to draw the heat from the holder. The cooling blocks can be immersed in water or coolant between tool changes to speed the cooling process. verage cooling times using a cold cooling block is 90 seconds. The cooling blocks can be ordered by specifying the I size of the toolholder that is to be used. WRNING: o not immerse toolholders in water or coolant without cooling first, it could cause distortion or breakage of toolholder due to rapid cooling (quenching) of the steel. OOLING SLEEVES NUMER TIIPS-11-012 TIIPS-11-018 TIIPS-11-025, 6M TIIPS-11-031 TIIPS-11-038, 8M, 10M TIIPS-11-044 TIIPS-11-050, 12M TIIPS-11-062, 14M, 16M TIIPS-11-075, 20M, 18M TIIPS-11-088 TIIPS-11-100, 25M TIIPS-11-125, 32M TIIPS-11-150 TIIPS-11-200 UTTING TOOL SIZE.125 TOOLS.187 TOOLS.250 & 6MM TOOLS.312 TOOLS.375,8MM, & 10MM TOOLS.437 TOOLS.500 & 12MM TOOLS.625,14MM, & 16MM TOOLS.750,20MM, & 18MMTOOLS.875 TOOLS 1.0 & 25MM TOOLS 1.25 & 32MM TOOLS 1.50 TOOLS 2.0 TOOLS 10
riney INUTION TOOL HNGING SYSTEM INUTION UNIT SUPERIOR ONTROL - Our ETL-approved, solid state Induction Tool hanging unit enables the operator to have total control over the heating process. The variable power setting on the machine provides a method of controlling the output of power. The power control regulates the amount of energy to be transmitted into heat and can easily be adjusted to the various sized tools. To assist in directing the correct amount of heat, the automatic cycle time control can be adjusted to the proper length of time necessary. This control can be set from 1 to 22 seconds. The normal settings for tooling from 1/4" thru 1 1/2" diameter is 70% power setting. If the outer diameter of the toolholder is relatively close in diameter to the coil the efficiency of the coil is enhanced. If the outer diameter is relatively small in relationship, the efficiency is reduced. The efficiency of the coil effects the cycle length, but small diameter tooling requires less shrink fit interference, therefore allowing for minimal adjustments of the machine to operate on most tooling. The normal cycle length for changing tooling is 7 seconds. INUTION HETING UNITS & OPTIONS INUTION HETING UNITS NUMER TI 10/10 N12 TI 10/10 HN12 TI 10/10 N12480 TI 10/10 HN12480 ESRIPTION Vertical unit with 220V/3 phase power requirement with NEM 12 electrical cabinet. Horizontal unit with 220V/3 phase power requirement with NEM 12 electrical cabinet. Vertical unit with 480V transformer with NEM 12 electrical cabinet. Horizontal unit with 480V transformer with NEM 12 electrical cabinet. 11
INUTION UNIT riney INUTION MHINE ESSORIES INFRRE SENSOR OPTION The Infrared Sensor Option allows for the most effective use of the Induction Machine in the shrink fit process. With the Infrared Option, the controls of the Induction Unit are overridden by using the desired temperature setting. When the toolholder reaches the desired temperature the machine shuts down automatically. This virtually eliminates improper use of the machine and operator error due to incorrect power and timer settings. Infrared is a practical addition for all shrink fit users. NUMER TIIR ESRIPTION Infrared Sensor For use with all Induction Units. INUTION OILS FOR VERTIL UNITS NUMER TII - 050 1.375 1.12 To change.500 max diameter tool shank TII - 125 2.125 1.25 To change 1.250 max diameter tool shank TII - 200 2.875 2.12 To change 0 max diameter tool shank ENLOSE INUTION OILS FOR HORIZONTL UNITS NUMER TIEI - 050 TIEI - 125 TIEI - 200 1.375 1.12 To change.500 max diameter tool shank 2.125 2.875 1.25 To change 1.250 max diameter tool shank 2.12 To change 0 max diameter tool shank HORIZONTL LMPING FIXTURE For clamping of additional toolholder styles on horizontal induction machines. NUMER SHNK SIZE TIHF - V40 TIHF - V45 TIHF - V50 TIHF - T40 TIHF - T50 TIHF - HSK32 TIHF - HSK40 TIHF - HSK50 TIHF - HSK63 TIHF - HSK100 V40 V45 V50 T40 T50 HSK32 HSK40 HSK50 HSK63 HSK100 3.25 3.88 2.48 3.94 1.26 1.58 1.97 2.48 3.94 One clamping fixture is included with the horizontal machine. 12
TI 12/U II riney OOLING EVIES 12-station cooling unit with self contained cooler unit for temperature regulation of the block and interchangeable cooling sleeves. The unit includes 12-TI 1 interchangeable cooling blocks to customize the unit to meet your needs. The 12- station block is designed and supplied with coolant channels throughout the block. Fittings, piping, pump and adjustable cooler unit to regulate the temperature of the coolant and block for rapid cooling of inducted heated tooling. The unit is mounted on a free standing shelving unit with casters for better mobility. The storage shelves hold between 10 and 40 toolholders based on the size of the toolholders. INUTION UNIT TI 24/U III 24-station cooling unit manufactured from aluminum. omes complete with moveable stand with shelves for tooling. Includes 24 TI 1 single cooling blocks to customize the unit to meet the needs of the customers. The 24-station block is designed and supplied with coolant channels throughout the block, fittings, piping and fully contained chiller unit to regulate the temperature of the coolant and block within +/- 2 degrees. The unit is free standing on a shelving unit with casters for easy movement. The storage shelves hold between 10 and 40 toolholders based on the size of the holders. This unit is designed for high volume shrink fit users. OOLING UNITS NUMER TI12/U II TI 24/U III ESRIPTION 12-Station with cooler eluxe ooling Unit 24-Station with hiller TI 1 Single aluminum cooling blocks to dissipate the heat from the toolholder. The interior diameter is tapered to match taper on O.. of toolholder. The toolholder uses conduction to draw the heat from the holder. The cooling blocks can be immersed in water or coolant between tool changes to speed the cooling process. verage cooling times using a cold cooling block is 90 seconds. The cooling blocks can be ordered by specifying the I size of the toolholder that is to be used. WRNING: o not immerse toolholders in water or coolant without cooling first, it could cause distortion or breakage of toolholder due to rapid cooling (quenching) of the steel. OOLING SLEEVES UTTING NUMER TOOL SIZE TI 1-3/16.187 TI 1-1/4.250 TI 1-5/16.312 TI 1-3/8.375 TI 1-7/16.437 TI 1-1/2.500 TI 1-5/8.625 NUMER TI 1-3/4 TI 1-7/8 TI 1-1 TI 1-1 1/4 TI 1-1 1/2 TI 1-2 TI 1-6M UTTING TOOL SIZE.750.875 1.25 1.50 6MM NUMER TI 1-8M TI 1-10M TI 1-12M TI 1-16M TI 1-20M TI 1-25M TI 1-32M UTTING TOOL SIZE 8MM 10MM 12MM 16MM 20MM 25MM 32MM 13
riney SHRINKER TOOLING SHRINKER TOOLING EROSPE UTOMOTIVE GENERL MHINING 14
riney T 40 V FLNGE PTERS For coolant thru ore Tooling, see page 32 V FLNGE TOOLING STNR LENGTH NUMER E V40SF-018-275.1875 0.937.500 3.75 V40SF-025-275.2500 0 0.750 3.75 V40SF-038-275.3750 0 1.125 3.75 V40SF-050-275.5000 0 1.250 V40SF-062-275.6250 0 1.375 2.12 V40SF-075-275.7500 0 1.500 1.25 2.25 V40SF-088-275.8750 0 1.625 1.25 2.25 V40SF-100-275 00 0 1.750 1.25 2.25 V40SF-125-275 1.2500 0 0 1.50 V40SF-150-325 1.5000 3.250 2.250 1.75 METRI STNR LENGTH (mm) NUMER E V40SF-6M-70 6 70 25.40 19.05 V40SF-8M-70 8 70 28.58 25.40 V40SF-10M-70 10 70 28.58 25.40 38.10 V40SF-12M-70 12 70 31.75 25.40 44.45 V40SF-14M-70 14 70 34.93 25.40 44.45 V40SF-16M-70 16 70 34.93 25.40 50.80 V40SF-18M-70 18 70 38.10 31.75 50.80 V40SF-20M-70 20 70 44.45 31.75 57.15 V40SF-32M-70 32 70 50.80 38.10 57.15 EXTENE LENGTH NUMER E V40SF-018-600.1875 6.000.937.500 V40SF-025-600.2500 6.000 0.750 V40SF-038-600.3750 6.000 1.125 V40SF-050-600.5000 6.000 1.250 V40SF-062-600.6250 6.000 1.375 2.12 V40SF-075-600.7500 6.000 1.500 1.25 2.25 V40SF-088-600.8750 6.000 1.625 1.25 2.25 V40SF-100-600 00 6.000 1.750 1.25 2.25 V40SF-125-600 1.2500 6.000 0 1.50 V40SF-150-600 1.5000 6.000 2.250 1.75 15
riney T 50 V FLNGE PTERS V FLNGE TOOLING For coolant thru ore Tooling, see page 32 STNR LENGTH NUMER E V50SF-018-300.1875.937.500 V50SF-025-300.2500 0.750 V50SF-038-300.3750 1.125 V50SF-050-300.5000 1.250 V50SF-062-300.6250 1.375 V50SF-075-300.7500 1.500 1.25 V50SF-088-300.8750 1.625 1.25 2.25 V50SF-100-300 00 1.750 1.25 2.25 V50SF-125-300 1.2500 0 1.50 V50SF-150-300 1.5000 2.250 1.75 V50SF-200-300 00 0 EXTR EXTENE LENGTH NUMER E V50SF-018-700.1875 7.00.937.500 V50SF-025-700.2500 7.00 0.750 V50SF-038-700.3750 7.00 1.125 V50SF-050-700.5000 7.00 1.250 V50SF-062-700.6250 7.00 1.375 V50SF-075-700.7500 7.00 1.500 1.25 V50SF-088-700.8750 7.00 1.625 1.25 2.25 V50SF-100-700 00 7.00 1.750 1.25 2.25 V50SF-125-700 1.2500 7.00 0 1.50 V50SF-150-700 1.5000 7.00 2.250 1.75 V50SF-200-700 00 7.00 0 EXTENE LENGTH NUMER E V50SF-018-500.1875 5.00.937.500 V50SF-025-500.2500 5.00 0.750 V50SF-038-500.3750 5.00 1.125 V50SF-050-500.5000 5.00 1.250 V50SF-062-500.6250 5.00 1.375 V50SF-075-500.7500 5.00 1.500 1.25 V50SF-088-500.8750 5.00 1.625 1.25 2.25 V50SF-100-500 00 5.00 1.750 1.25 2.25 V50SF-125-500 1.2500 5.00 0 1.50 V50SF-150-500 1.5000 5.00 2.250 1.75 V50SF-200-500 00 5.00 0 METRI STNR LENGTH (mm) NUMER E V50SF-6M-75 6 75 25.40 19.05 V50SF-8M-75 8 75 28.58 25.40 V50SF-10M-75 10 75 28.58 25.40 38.10 V50SF-12M-75 12 75 31.75 25.40 44.45 V50SF-14M-75 14 75 34.93 25.40 44.45 V50SF-16M-75 16 75 34.93 25.40 50.80 V50SF-18M-75 18 75 38.10 31.75 50.80 V50SF-20M-75 20 75 38.10 31.75 50.80 V50SF-25M-75 25 75 44.45 31.75 57.15 V50SF-32M-75 32 75 50.80 38.10 57.15 16
riney 40 T FLNGE PTERS For coolant thru ore Tooling, see page 32 T FLNGE TOOLING STNR LENGTH NUMER E T40SF-018-275.1875.937.500 T40SF-038-275.3750 1.125 T40SF-050-275.5000 1.250 T40SF-062-275.6250 1.375 2.12 T40SF-075-275.7500 1.500 1.25 2.25 T40SF-088-275.8750 1.625 1.25 2.25 T40SF-100-275 00 1.750 1.25 2.25 T40SF-125-275 1.2500 0 1.50 T40SF-150-275 1.5000 2.250 1.75 EXTENE LENGTH NUMER E T40SF-018-600.1875 6.00.937.500 T40SF-038-600.3750 6.00 1.125 T40SF-050-600.5000 6.00 1.250 T40SF-062-600.6250 6.00 1.375 2.12 T40SF-075-600.7500 6.00 1.500 1.25 2.25 T40SF-088-600.8750 6.00 1.625 1.25 2.25 T40SF-100-600 00 6.00 1.750 1.25 2.25 T40SF-125-600 1.2500 6.00 0 1.50 T40SF-150-600 1.5000 6.00 2.250 1.75 17
riney 50 T FLNGE PTER For coolant thru ore Tooling, see page 32 T FLNGE TOOLING STNR LENGTH NUMER E T50SF-018-300.1875.937.500 T50SF-038-300.3750 1.125 T50SF-050-300.5000 1.250 T50SF-062-300.6250 1.375 T50SF-075-300.7500 1.500 1.25 T50SF-088-300.8750 1.625 1.25 2.25 T50SF-100-300 00 1.750 1.25 2.25 T50SF-125-300 1.2500 0 1.50 T50SF-150-300 1.5000 2.250 1.75 T50SF-200-300 00 0 EXTENE LENGTH NUMER E T50SF-018-500.1875 5.00.937.500 T50SF-038-500.3750 5.00 1.125 T50SF-050-500.5000 5.00 1.250 T50SF-062-500.6250 5.00 1.375 T50SF-075-500.7500 5.00 1.500 1.25 T50SF-088-500.8750 5.00 1.625 1.25 2.25 T50SF-100-500 00 5.00 1.750 1.25 2.25 T50SF-125-500 1.2500 5.00 0 1.50 T50SF-150-500 1.5000 5.00 2.250 1.75 T50SF-200-500 00 5.00 0 18
riney HSK32 IN69893 For coolant thru ore Tooling, see page 32 HSK TOOLING STNR LENGTH NUMER E HSK32SF-018-236.1875 2.36.937.500 1.25 HSK32SF-025-236.2500 2.36 0.750 1.25 HSK32SF-038-256.3750 2.56 1.125 1.50 HSK32SF-050-276.5000 2.76 1.250 1.60 EXTENE LENGTH NUMER E HSK32SF-018-315.1875 3.15.937.500 1.25 HSK32SF-025-315.2500 3.15 0.750 1.25 HSK32SF-038-315.3750 3.15 1.125 1.50 HSK32SF-050-354.5000 3.54 1.250 1.60 METRI STNR LENGTH (mm) NUMER E HSK32SF-6M-60 6 60 25.40 19.05 31.75 HSK32SF-10M-65 10 65 28.57 25.40 38.10 HSK32SF-12M-70 12 70 31.75 25.40 40.64 19
riney HSK32 IN69893 For coolant thru ore Tooling, see page 32 HSK TOOLING STNR LENGTH NUMER E HSK32SF-018-236.1875 2.36.937.500 1.25 HSK32SF-025-236.2500 2.36 0.750 1.25 HSK32SF-038-256.3750 2.56 1.125 1.50 HSK32SF-050-276.5000 2.76 1.250 1.60 EXTENE LENGTH NUMER E HSK32SF-018-315.1875 3.15.937.500 1.25 HSK32SF-025-315.2500 3.15 0.750 1.25 HSK32SF-038-315.3750 3.15 1.125 1.50 HSK32SF-050-354.5000 3.54 1.250 1.60 METRI STNR LENGTH (mm) NUMER E HSK32SF-6M-60 6 60 25.40 19.05 31.75 HSK32SF-8M-60 8 60 28.58 25.40 31.75 HSK32SF-10M-65 10 65 28.57 25.40 38.10 HSK32SF-12M-70 12 70 31.75 25.40 40.64 20
riney HSK32E IN69893 For coolant thru ore Tooling, see page 32 HSK TOOLING STNR LENGTH NUMER E HSK32ESF-018-236.1875 2.36.937.500 1.25 HSK32ESF-025-236.2500 2.36 0.750 1.25 HSK32ESF-038-256.3750 2.56 1.125 1.50 HSK32ESF-050-276.5000 2.76 1.250 1.60 EXTENE LENGTH NUMER E HSK32ESF-018-315.1875 3.15.937.500 1.25 HSK32ESF-025-315.2500 3.15 0.750 1.25 HSK32ESF-038-315.3750 3.15 1.125 1.50 HSK32ESF-050-354.5000 3.54 1.250 1.60 METRI STNR LENGTH (mm) NUMER E HSK32ESF-6M-60 6 60 25.40 19.05 31.75 HSK32ESF-10M-65 10 65 28.57 25.40 38.10 HSK32ESF-12M-70 12 70 31.75 25.40 40.64 21
riney HSK63 IN69893 For coolant thru ore Tooling, see page 32 HSK TOOLING STU LENGTH NUMER E HSK63SF-018-236.1875 2.36.937.500 1.25 HSK63SF-025-236.2500 2.36 0.750 1.25 HSK63SF-038-256.3750 2.56 1.125 1.50 HSK63SF-050-295.5000 2.95 1.250 1.75 HSK63SF-062-315.6250 3.15 1.375 HSK63SF-075-315.7500 3.15 1.500 1.25 HSK63SF-100-374 00 3.74 1.750 1.25 2.25 HSK63SF-125-394 1.2500 3.94 0 1.50 EXTENE LENGTH NUMER E HSK63SF-018-590.1875 5.90.937.500 1.25 HSK63SF-025-590.2500 5.90 0.750 1.25 HSK63SF-038-590.3750 5.90 1.125 1.50 HSK63SF-050-590.5000 5.90 1.250 1.75 HSK63SF-062-590.6250 5.90 1.375 HSK63SF-075-590.7500 5.90 1.500 1.25 HSK63SF-100-590 00 5.90 1.750 1.25 2.25 HSK63SF-125-590 1.2500 5.90 0 1.50 STNR LENGTH NUMER E HSK63SF-018-315.1875 3.15.937.500 1.25 HSK63SF-025-315.2500 3.15 0.750 1.25 HSK63SF-038-315.3750 3.15 1.125 1.50 HSK63SF-050-354.5000 3.54 1.250 1.75 HSK63SF-062-394.6250 3.94 1.375 HSK63SF-075-394.7500 3.94 1.500 1.25 HSK63SF-100-433 00 4.33 1.750 1.25 2.25 HSK63SF-125-433 1.2500 4.33 0 1.50 METRI STNR LENGTH (mm) NUMER E HSK63SF-6M-80 6 80 25.40 19.05 31.75 HSK63SF-8M-80 8 80 28.58 25.40 38.10 HSK63SF-10M-80 10 80 28.58 25.40 38.10 HSK63SF-12M-90 12 90 31.75 25.40 44.45 HSK63SF-14M-95 14 95 34.93 25.40 44.45 HSK63SF-16M-100 16 100 34.93 25.40 50.80 HSK63SF-18M-100 18 100 38.10 31.75 50.80 HSK63SF-20M-100 20 100 38.10 31.75 50.80 HSK63SF-25M-110 25 110 44.45 31.75 57.15 HSK63SF-32M-110 32 110 50.80 38.10 57.15 22
riney HSK63 IN69893 For coolant thru ore Tooling, see page 32 HSK TOOLING STU LENGTH NUMER E HSK63SF-018-236.1875 2.36.937.500 1.25 HSK63SF-025-236.2500 2.36 0.750 1.25 HSK63SF-038-256.3750 2.56 1.125 1.50 HSK63SF-050-295.5000 2.95 1.250 1.75 HSK63SF-062-315.6250 3.15 1.375 HSK63SF-075-315.7500 3.15 1.500 1.25 HSK63SF-100-374 00 3.74 1.750 1.25 2.25 HSK63SF-125-394 1.2500 3.94 0 1.50 METRI STU LENGTH NUMER E HSK63SF-6M-60 6 60 25.40 19.05 HSK63SF-8M-60 8 60 28.58 25.40 HSK63SF-10M-65 10 65 28.58 25.40 38.10 HSK63SF-12M-75 12 75 31.75 25.40 44.45 HSK63SF-14M-75 14 75 34.93 25.40 44.45 HSK63SF-16M-80 16 80 34.93 25.40 50.80 HSK63SF-18M-80 18 80 38.10 31.75 50.80 HSK63SF-20M-80 20 80 38.10 31.75 50.80 HSK63SF-25M-95 25 95 44.45 31.75 57.15 HSK63SF-32M-95 32 95 50.80 38.10 57.15 STNR LENGTH NUMER E HSK63SF-018-315.1875 3.15.937.500 1.25 HSK63SF-025-315.2500 3.15 0.750 1.25 HSK63SF-038-315.3750 3.15 1.125 1.50 HSK63SF-050-354.5000 3.54 1.250 1.75 HSK63SF-062-394.6250 3.94 1.375 HSK63SF-075-394.7500 3.94 1.500 1.25 HSK63SF-100-433 00 4.33 1.750 1.25 2.25 HSK63SF-125-433 1.2500 4.33 0 1.50 METRI STNR LENGTH (mm) NUMER E HSK63SF-6M-80 6 80 25.40 19.05 31.75 HSK63SF-8M-80 8 80 28.58 25.40 38.10 HSK63SF-10M-80 10 80 28.58 25.40 38.10 HSK63SF-12M-90 12 90 31.75 25.40 44.45 HSK63SF-14M-90 14 90 34.93 25.40 44.45 HSK63SF-16M-100 16 100 34.93 25.40 50.80 HSK63SF-18M-100 18 100 38.10 31.75 50.80 HSK63SF-20M-100 20 100 38.10 31.75 50.80 HSK63SF-25M-110 25 110 44.45 31.75 57.15 HSK63SF-32M-110 32 110 50.80 38.10 57.15 23
riney HSK63E IN69893 For coolant thru ore Tooling, see page 32 HSK TOOLING STU LENGTH NUMER E HSK63ESF-018-236.1875 2.36.937.500 1.25 HSK63ESF-025-236.2500 2.36 0.750 1.25 HSK63ESF-038-256.3750 2.56 1.125 1.50 HSK63ESF-050-295.5000 2.95 1.250 1.75 HSK63ESF-062-315.6250 3.15 1.375 HSK63ESF-075-315.7500 3.15 1.500 1.25 HSK63ESF-100-374 00 3.74 1.750 1.25 2.25 HSK63ESF-125-394 1.2500 3.94 0 1.50 STNR LENGTH NUMER E HSK63ESF-018-315.1875 3.15.937.500 1.25 HSK63ESF-025-315.2500 3.15 0.750 1.25 HSK63ESF-038-315.3750 3.15 1.125 1.50 HSK63ESF-050-354.5000 3.54 1.250 1.75 HSK63ESF-062-394.6250 3.94 1.375 HSK63ESF-075-394.7500 3.94 1.500 1.25 HSK63ESF-100-433 00 4.33 1.750 1.25 2.25 HSK63ESF-125-433 1.2500 4.33 0 1.50 EXTENE LENGTH NUMER E HSK63ESF-018-590.1875 5.90.937.500 1.25 HSK63ESF-025-590.2500 5.90 0.750 1.25 HSK63ESF-038-590.3750 5.90 1.125 1.50 HSK63ESF-050-590.5000 5.90 1.250 1.75 HSK63ESF-062-590.6250 5.90 1.375 HSK63ESF-075-590.7500 5.90 1.500 1.25 HSK63ESF-100-590 00 5.90 1.750 1.25 2.25 HSK63ESF-125-590 1.2500 5.90 0 1.50 METRI STNR LENGTH (mm) NUMER E HSK63ESF-6M-80 6 80 25.40 19.05 31.75 HSK63ESF-10M-80 10 80 28.50 25.40 38.10 HSK63ESF-12M-90 12 90 31.75 25.40 44.45 HSK63ESF-16M-100 16 100 34.93 25.40 50.80 HSK63ESF-20M-100 20 100 38.10 31.75 50.80 HSK63ESF-25M-110 25 110 44.45 31.75 57.15 24
riney HSK63SF IN69893 For coolant thru ore Tooling, see page 32 UTOMOTIVE HSK TOOLING STNR LENGTH NUMER E F HSK63SF-6M-80 6MM 80MM 27MM 26MM 36MM M5X0.8LH HSK63SF-8M-80 8MM 80MM 27MM 26MM 36MM M6X1.0LH HSK63SF-10M-85 10MM 85MM 32MM 32MM 42MM M8X1.25LH HSK63SF-12M-90 12MM 90MM 32MM 37MM 47MM M10X1.5LH HSK63SF-14M-90 14MM 90MM 34MM 37MM 47MM M12X1.75LH HSK63SF-16M-95 16MM 95MM 34MM 40MM 50MM M14X2.0LH HSK63SF-18M-95 18MM 95MM 42MM 40MM 50MM M16X2.0LH HSK63SF-20M-100 20MM 100MM 42MM 42MM 52MM M18X1.5LH HSK63SF-25M-115 25MM 115MM 53MM 48MM 58MM M18X1.5LH HSK63SF-32M-120 32MM 120MM 53MM 48MM 58MM M18X1.5LH 25
riney HSK100 IN69893 For coolant thru ore Tooling, see page 32 HSK TOOLING STU LENGTH NUMER E HSK100SF-038-315.3750 3.15 1.125 1.50 HSK100SF-050-315.5000 3.15 1.250 1.75 HSK100SF-062-315.6250 3.15 1.375 HSK100SF-075-315.7500 3.15 1.500 1.25 HSK100SF-100-315 00 3.15 1.750 1.25 2.25 HSK100SF-125-315 1.2500 3.15 0 1.50 HSK100SF-150-315 1.5000 3.15 2.250 1.75 STNR LENGTH NUMER E HSK100SF-038-394.3750 3.94 1.125 1.50 HSK100SF-050-394.5000 3.94 1.250 1.75 HSK100SF-062-394.6250 3.94 1.375 HSK100SF-075-433.7500 4.33 1.500 1.25 HSK100SF-100-472 00 4.72 1.750 1.25 2.25 HSK100SF-125-472 1.2500 4.72 0 1.50 HSK100SF-150-472 1.5000 4.72 2.250 1.75 EXTENE LENGTH NUMER E HSK100SF-038-650.3750 6.50 1.125 1.50 HSK100SF-050-650.5000 6.50 1.250 1.75 HSK100SF-062-650.6250 6.50 1.375 HSK100SF-075-650.7500 6.50 1.500 1.25 HSK100SF-100-650 00 6.50 1.750 1.25 2.25 HSK100SF-125-650 1.2500 6.50 0 1.50 HSK100SF-150-650 1.5000 6.50 2.250 1.75 METRI STNR LENGTH (mm) NUMER E HSK100SF-6M-100 6 100 25.40 19.05 HSK100SF-8M-100 8 100 28.58 25.40 HSK100SF-10M-100 10 100 28.58 25.40 HSK100SF-12M-100 12 100 31.75 25.40 44.45 HSK100SF-14M-105 14 105 34.93 25.40 44.45 HSK100SF-16M-110 16 110 34.93 25.40 50.80 HSK100SF-18M-110 18 110 38.10 31.75 50.80 HSK100SF-20M-120 20 120 38.10 31.75 50.80 HSK100SF-25M-120 25 120 44.45 31.75 57.15 HSK100SF-32M-120 32 120 50.80 38.10 57.15 26
riney HSK100 IN69893 For coolant thru ore Tooling, see page 32 HSK TOOLING STU LENGTH NUMER E HSK100SF-038-315.3750 3.15 1.125 1.50 HSK100SF-050-315.5000 3.15 1.250 1.75 HSK100SF-062-315.6250 3.15 1.375 HSK100SF-075-315.7500 3.15 1.500 1.25 HSK100SF-100-315 00 3.15 1.750 1.25 2.25 HSK100SF-125-315 1.2500 3.15 0 1.50 HSK100SF-150-315 1.5000 3.15 2.250 1.75 STNR LENGTH NUMER E HSK100SF-038-394.3750 3.94 1.125 1.50 HSK100SF-050-394.5000 3.94 1.250 1.75 HSK100SF-062-394.6250 3.94 1.375 HSK100SF-075-433.7500 4.33 1.500 1.25 HSK100SF-100-472 00 4.72 1.750 1.25 2.25 HSK100SF-125-472 1.2500 4.72 0 1.50 HSK100SF-150-472 1.5000 4.72 2.250 1.75 EXTENE LENGTH NUMER E HSK100SF-038-650.3750 6.50 1.125 1.50 HSK100SF-050-650.5000 6.50 1.250 1.75 HSK100SF-062-650.6250 6.50 1.375 HSK100SF-075-650.7500 6.50 1.500 1.25 HSK100SF-100-650 00 6.50 1.750 1.25 2.25 HSK100SF-125-650 1.2500 6.50 0 1.50 HSK100SF-150-650 1.5000 6.50 2.250 1.75 METRI STNR LENGTH (mm) NUMER E HSK100SF-6M-100 6 100 25.40 19.05 HSK100SF-8M-100 8 100 28.58 25.40 HSK100SF-10M-100 10 100 28.58 25.40 HSK100SF-12M-100 12 100 31.75 25.40 44.45 HSK100SF-14M-105 14 105 34.93 25.40 44.45 HSK100SF-16M-110 16 110 34.93 28.58 50.80 HSK100SF-18M-110 18 110 38.10 28.58 50.80 HSK100SF-20M-120 20 120 38.10 28.58 50.80 HSK100SF-25M-120 25 120 44.45 31.75 57.15 HSK100SF-32M-120 32 120 50.80 38.10 57.15 27
riney EPTH SETTING UNITS Use our depth setting unit to preset the projection of the cutting tool. Select the proper unit for the tool to be pre-set: EPTH SETTING UNITS to JUSTLE EPTH SETTING UNITS 28 NUMER TISU-038.3750 0 1.500 TISU-050.5000 0 1.500 TISU-062.6250 0 1.500 TISU-075.7500 0 1.500 TISU-100 00 0 1.500 TISU-125 1.2500 0 1.500 TISU-150 1.5000 0 1.500 TISU-200 00 0 1.500 TO JUSTLE EPTH SETTING UNITS NUMER TISU4-038.3750 0 3.500 TISU4-050.5000 0 3.500 TISU4-062.6250 0 3.500 TISU4-075.7500 0 3.500 TISU4-100 00 0 3.500 TISU4-125 1.2500 0 3.500 TISU4-150 1.5000 0 3.500 TISU4-200 00 0 3.500 METRI NUMER TISU-6M 6mm 0 1.500 TISU-10M 10mm 0 1.500 TISU-12M 12mm 0 1.500 TISU-16M 16mm 0 1.500 TISU-20M 20mm 0 1.500 TISU-25M 25mm 0 1.500 TISU-32M 32mm 0 1.500 TO JUSTLE EPTH SETTING UNITS NUMER TISU4-6M 6mm 0 3.500 TISU4-10M 10mm 0 3.500 TISU4-12M 12mm 0 3.500 TISU4-16M 16mm 0 3.500 TISU4-20M 20mm 0 3.500 TISU4-25M 25mm 0 3.500 TISU4-32M 32mm 0 3.500 1.) Place locking ring over cutting tool to approximate depth. 2.) Insert the cutting tool in to depth setting unit. 3.) djust the micrometer to the projection length desired. 4.) Hold locking ring in place against setting unit and clamp in place using lock screw. Remove depth setting unit. 5.) Select proper toolholder and cycle Induction Unit to expand bore. 6.) Insert cutting tool shank into heat expanded toolholder. 7.) When the toolholder cools and the shank is clamped remove locking ring. 8.) llow toolholder to cool in cooling unit or cooling block. 9.) Tool and holder are ready for use. ll Shrinker toolholders are qualified from the gage line or flange shoulder to the end of the holder to within +/-.001. The locking collars are precision ground to.5000 +/-.0002. y controlling the projection from the face of the holder, tools can be preset to.001 or less. If required, the toolholders can be qualified to closer tolerance and presetting to +/-.0002 or less can be achieved. Shrinker toolholders are being used extensively on multiple spindle machines using this method of presetting. dditional locking rings are available on page 29.
riney LOKING RINGS Select the proper locking ring to clamp onto the cutting tool and control the projection of the tool. 1.) Place the locking ring over the cutting tool, adjust to the proper depth and clamp in place using the locking screw. 2.) Insert the Tool Shank into the heat expanded bore of the toolholder. 3.) When the Tool holder cools and the shank is clamped, remove the locking ring. 4.) Tool and Toolholder are ready for use. LOKING RINGS NUMER TILR-038.3750 1.50.5000 TILR-050.5000 1.50.5000 TILR-062.6250 1.75.5000 TILR-075.7500 1.75.5000 TILR-100 00.5000 TILR-125 1.2500 2.25.5000 TILR-150 1.5000.5000 TILR-200 00.5000 METRI LOKING RINGS NUMER TILR-6M 6mm 1.50.5000 TILR-8M 8mm 1.50.5000 TILR-10M 10mm 1.50.5000 TILR-12M 12mm 1.50.5000 TILR-14M 14mm 1.50.5000 TILR-16M 16mm 1.50.5000 TILR-20M 20mm 1.50.5000 TILR-25M 25mm 1.50.5000 TILR-32M 32mm 1.50.5000 LOKING RINGS MIROMETER HE NUMER TIMH-100 0 - TIMH-200 0 - Micrometer heads are for use with depth setting units on page 28. 29
riney INUTION SPER RINGS SPER RINGS FOR V FLNGE HOLERS NUMER SHNK SIZE EXT. LENGTH ISR-V40-275 V 40 0 2.25 ISR-V40-325 V 40 3.250 2.25 ISR-V45-200 V 45 0 3.25 3.50 ISR-V45-400 V 45 0 3.25 3.50 ISR-V50-200 V 50 0 3.88 4.12 3.62 ISR-V50-400 V 50 0 3.88 4.12 3.62 FOR HSK SHNK HOLERS NUMER SHNK SIZE EXT. LENGTH ISR-HSK32-040 HSK32.400 1.26 1.51 1.01 ISR-HSK32-075 HSK32.750 1.26 1.51 1.01 ISR-HSK32-100 HSK32 0 1.26 1.51 1.01 ISR-HSK40-040 HSK40.400 1.58 1.83 1.33 ISR-HSK40-060 HSK40.600 1.58 1.83 1.33 ISR-HSK40-160 HSK40 1.600 1.58 1.83 1.33 ISR-HSK50-040 HSK50.400 1.97 2.22 1.72 ISR-HSK50-060 HSK50.600 1.97 2.22 1.72 ISR-HSK50-120 HSK50 1.200 1.97 2.22 1.72 ISR-HSK50-160 HSK50 1.600 1.97 2.22 1.72 ISR-HSK63-040 HSK63.400 2.48 2.73 2.23 ISR-HSK63-060 HSK63.600 2.48 2.73 2.23 ISR-HSK63-120 HSK63 1.200 2.48 2.73 2.23 ISR-HSK63-160 HSK63 1.600 2.48 2.73 2.23 ISR-HSK63-197 HSK63 1.970 2.48 2.73 2.23 ISR-HSK63-354 HSK63 3.540 2.48 2.73 2.23 ISR-HSK100-080 HSK100.800 3.94 4.19 3.69 ISR-HSK100-118 HSK100 1.180 3.94 4.19 3.69 ISR-HSK100-157 HSK100 1.570 3.94 4.19 3.69 ISR-HSK100-178 HSK100 1.780 3.94 4.19 3.69 ISR-HSK100-217 HSK100 2.170 3.94 4.19 3.69 ISR-HSK100-256 HSK100 2.560 3.94 4.19 3.69 ISR-HSK100-335 HSK100 3.350 3.94 4.19 3.69 Use our Induction Spacer Rings to eliminate the adjustment of the table height on the Vertical Induction Heating Units. These spacer rings allow for quick change over from standard to extended and extra extended length holders. EXMPLE: set the Induction machine table at the proper height to change a standard length V50SF-100-300. The 300 designates the projection is from the gage line to the end of the toolholder. If you wish to change a V50SF-100-500 a 5.00 projection toolholder, you select the ISR-V50-200, ( extension spacer) place the ring on the Induction Machine table and insert the toolholder. The spacer ring will suspend the toolholder at the proper changing height without adjusting the table. 30
HSK OOLNT TUES riney HSK OOLNT TUES & INSTLLTION WRENH HSK OOLNT TUES NUMER TPER SIZE TIT-HSK32 HSK32.236.216 1.012 M10X1 TIT-HSK40 HSK40.315.295 1.150 M12X1 TTIT-HSK50 HSK50.394.374 1.287 M16X1 TIT-HSK63 HSK63.472.452 1.425 M18X1 TIT-HSK100 HSK100.630.610 1.716 M24X1.5 INSTLLTION WRENH NUMER TPER SIZE TIIW-HSK32 HSK32.334 4.21 TIIW-HSK40 HSK40.413 4.40 TIIW-HSK50 HSK50.570 4.60 TIIW-HSK63 HSK63.650 4.80 TIIW-HSK100 HSK100.866 5.55 31
OOLNT ORE TOOLING riney OOLNT THROUGH ORE TOOLING EXMPLE: V40SF-050-250 riney offers the ultimate in coolant through bore toolholders. y utilizing the shrink fit connection, which creates an air and coolant tight seal, coolant grooves can be added to the bore, to direct coolant down the flutes of the cutting tool, directly onto the cutting edge. Our system eliminates the need for special coolant through tools, sealing accessories or altering the tool shank for coolant delivery. To order coolant through bore tooling, please add a after the SF in the part number. EXMPLE: V40SF-050-250. Send for your quote today for the best in coolant through tooling. The shrinker toolholding system delivers more gripping strength and machining accuracy than any other toolholder. 32
riney PREISION N TOOLHOLING RINEY TOOL HOLERS OLLET HUKS T-FLNGE OLLET HUKS T-FLNGE EN MILL PTERS EN MILL PTERS V-FLNGE HSK NMT V-FLNGE HSK NMT MILL TP RILL REM 33
STRT-UP PKGES V 40 & T 40 FLNGE MHINE STRT-UP PKGE * PLESE SPEIFY V 40 or T 40 Flange Tooling riney These items are a suggested package of toolholders to allow you to perform the various machining operations on your new N mill. QUNTITY ORERE QUNTITY REOMMENE 1 1 1 1 1 1 ESRIPTION / NUMER 3/8 EN MILL PTER 1/2 EN MILL PTER 5/8 EN MILL PTER 3/4 EN MILL PTER 1" EN MILL PTER 1-1/4 EN MILL PTER 4 OLLET HUK PTER 3/32-1" RNGE 1 SET TG100-30 1 TG100-HW 1 1 SHELL MILL PTER SHELL MILL PTER 1.25 1 1 #33 JOS TPER PTER #6 JOS TPER PTER 1 1 #9682 #9685 2 1 1 #2 MORSE TPER PTER #3 MORSE TPER PTER #4 MORSE TPER PTER 2 TP HOLERS NOTE: THE OVE ITEMS O NOT INLUE RETENTION KNOS. PLESE INFORM RINEY OF THE MKE & MOEL OF YOUR MHINE, N WE WILL QUOTE THE PROPER KNOS. 34
riney * PLESE SPEIFY V 50 or T 50 Flange Tooling V 50 & T 50 FLNGE MHINE STRT-UP PKGE STRT-UP PKGES These items are a suggested package of toolholders to allow you to perform the various machining operations on your new N mill. QUNTITY ORERE QUNTITY REOMMENE 1 2 2 2 2 2 1 1 4 ESRIPTION / NUMER 3/8 EN MILL PTER 1/2 EN MILL PTER 5/8 EN MILL PTER 3/4 EN MILL PTER 1" EN MILL PTER 1-1/4 EN MILL PTER 1-1/2 EN MILL PTER 2" EN MILL PTER OLLET HUK PTER 3/32-1 RNGE 1 SET TG100-30 1 TG100-HW 1 1 1 SHELL MILL PTER SHELL MILL PTER 1.25 SHELL MILL PTER 1.50 1 1 #33 JOS TPER PTER #6 JOS TPER PTER 1 1 #9682 #9685 2 1 #3 MORSE TPER PTER #4 MORSE TPER PTER 2 #1 SIZE TP HOLERS 1 #2 SIZE TP HOLERS NOTE: THE OVE ITEMS O NOT INLUE RETENTION KNOS. PLESE INFORM RINEY OF THE MKE & MOEL OF YOUR MHINE N WE WILL QUOTE THE PROPER KNOS. 35
RINEY EENTRI ORE TOOLHOLERS riney EENTRI ORE TOOLHOLERS riney Eccentric ore Tooling, an innovative, proven end mill holder design dramatically reduces total indicator runout (TIR) typical of all end mill holders using a set screw or Weldon flat set screw. Improving the out-of-concentric condition of the tool holder bore from.0008 to.0002, the riney holders feature an eccentric bore, imparting.0003 eccentricity in the direction of the set screw. For example, a standard 1 tool holder bore diameter is 01, and the end mill for that holder is.9997 ; the clearance between the diameters is.0004. With the riney.0003 eccentric bore, as the set screw is tightened, the clearance is pushed to within.0001 of center, while the standard holder maintains the.0004 clearance and the clearances are pushed.0004 off-center. So, when a set screw is turned down in the standard holder and the tool is rotated 180 degrees, the total runout is.0008. Eccentric ore Toolholders are available in these styles: V40 V50 T40 T50 36
riney RINEY EENTRI ORE TOOLHOLERS EENTRI ORE TOOLHOLERS The riney Eccentric ore concept. special grinding technique reduces runout in all riney end mill holders to.0002 from.0008 typical in other holders. With the riney Eccentric ore Tooling, the shallow recess of the.0003 eccentric ground into the bore effectively reduces the potential off-center condition of the tool caused by the application of the set screw, keeping TIR to.0002 when the tool is rotated and properly located, according to the company. patented internal grinding technique reduces bore runout in riney end mill holders after clamping from 0.002 typical in every other holder to our new standard 0.0002 regradless of size, without affecting other tool holder features and tolerances. ll riney V40, V50, T40 and T 50 holders are ground with bores featuring the offset, improving milling quality and tool and holder life without additional cost to the user. VNTGES INLUE: Less runout means a more even chip load and a lot less chatter Fewer passes to mill slots because of improved on-center rotation, saving time and improving machining quality Twice the tool life you can get with any other end mill holder plus half the tooling replacement expense because tools last longer 37
OOLNT THRU FE TOOLING riney TF & TRU-VELOIYTY EN MILL PTERS riney builds coolant through the face (TF) holders. TF holders are sometimes referred to as IN holders. IN 69871 Form calls for metric retention knob threads and an orientation notch. IN 69871 also calls for a larger safety diameter than TF holders. TF holders are used primarily in Mori Seiki machining centers to accommodate through the face coolant routing. NOTE! To order coolent thru face tooling specify with an TF after part number. Example: V40E-018-250-TF or see back page of book for details. HIGH SPEE LNE TOOLING RINEY offers a choice to match your high speed needs: Tru Velocity and Maximum Velocity alanced Tooling TRU VELOITY alanced Tooling Static or dynamic balanced for speeds up to 20,000 RPM. Recommended for all machines over 5,000 RPM and up to 20,000 RPM. oncentric.0002 shank-to-bore. N precision traverse ground to T3 Taper Quality. enefits: Extended tool life. Faster speeds and feed rates. Increased accuracy and repeatability. Superior surface finish. 38 TI Model TH-25 ynamic alancing Machine MXIMUM VELOITY ynamic alanced Tooling ynamically balanced for speeds up to 30,000 RPM. oncentric.0002 shank-to-bore. N precision traverse ground to T3 Taper Quality. Recommended for machines 20,000 RPM to 30,000 RPM spindle speed. enefits: Extended tool life. Optimum speeds and feed rates. Increased accuracy and repeatability. Eliminates vibration and chatter. Increases productivity. ost savings (tooling and machine time).
riney LNE TOOLING Understanding Unbalance Tolerance The merican National Standards Institute for alance Quality of Rigid Rotating odies NSI S.19-1989, defines permissible residual unbalance for a rotating body relative to its maximum service speed. Machine builders follow this specification in manufacturing spindles used in today s machining centers. alance quality specifications for spindles is G 2.5mm/sec. However, the typical at V Flange tool has 250 gr/mm unbalance due to the unequaled drive slots in the original design. To correct for this design unbalance, all riney tooling is manufactured with an altered standard drive slot to properly equalize the weight. This change in tool design enables the ynamically alanced riney Tru Velocity tools to meet the G 2.5 tolerance of machine spindles. Tru Velocity tools can run up to 20,000 RPM without putting undue stress on the machine spindle. In developing the formulas for unbalance, spindle speed is the primary factor in determining the balance tolerance. For machines with spindle speeds that exceed 20,000 RPM, the amount of unbalance allowed to meet the G 2.5 specification is greatly reduced. TF & TRU-VELOIYTY Projected Tool Life GOO VG POOR Maximum Velocity Holder Tru Velocity Holder Standard Unbalanced Holder 5,000 10,000 15,000 20,000 30,000 Tests based on 3lb. Toolholder bove 30,000 RPM riney recommends the adapter be custom-manufactured for each tool and operation to ensure proper balance and safety. To meet this stricter balance specification, riney offers Maximum Velocity tooling. Maximum Velocity tools are manufactured with improved designs, special operations, and improved accessory items. The final step in the process is a complete dynamic balancing operation. Our dynamic balancing machine is a stateof-the-art hard bearing 2-plane balancing system with spindleless drive and highly sensitive electronic measuring system. riney Maximum Velocity tooling is balanced to G 2.5 or better at 30,000 RPM. This specification meets or exceeds the spindle balance specification for all machine tool builders. For spindle speeds over 30,000 RPM, contact riney for a quotation on alanced Engineered tooling. These special tooling requirements will be engineered and manufactured to meet the high speed specification required and then custom balanced with the cutting tools assembled to ensure the correct balance at ultra high speed. 39
V 40 FLNGE EN MILL PTERS STU LENGTH NUMER V40E-050-175 V40E-062-175 V40E-075-175 V40E-100-175 *V40E-125-200.500.625.750 0 1.250 1.75 1.75 1.75 1.75 2.25 riney E 1.75 1.75 1.75 1.75 2.38 2.25 2.35.88.94 1.12 1.12 SET SREW 7/16-20W 9/16-18W 5/8-18W 3/4-16W 3/4-16W EN MILL TYPE SINGLE EN Order retention knobs separately, specify machine make and model #. *annot be used with some automatic tool changers. V FLNGE TOOLING STNR LENGTH SET E F NUMER SREW TYPE V40E-012-250 V40E-018-250 V40E-025-250 V40E-031-250 V40E-038-250 V40E-044-250 V40E-050-262 V40E-062-375 V40E-075-375 V40E-088-400 V40E-100-300 V40E-100-400 V40E-125-425 V40E-150-462.125.1875.250.3125.375.4375.500.625.750.875 0 0 1.250 1.500.68.68.88 1.25 1.25 1.50 1.75 2.62 3.75 3.75 4.25 4.62 3.62 4.50.31.44.44.44.74.74.88.94 1.12 1.12 1.12 1.12.81 8-32W 1/4-28W 1/4-28W 10-32W 3/8-24W 3/8-24W 7/16-20W 9/16-18W 5/8-18W 5/8-18W 3/4-16W 3/4-16W 3/4-16W 3/4-16W SINGLE OR OULE EN SINGLE OULE SINGLE EN Order retention knobs separately, specify machine make and model #. INTERMEITE LENGTH NUMER V40E-025-450 V40E-038-450 V40E-050-450 V40E-062-475 V40E-075-475.250.375.500.625.750 0.88 1.25 1.50 1.75 E 4.50 4.50 4.50 4.75 4.75 3.62.44.74.88.94 F SET SREW 1/4-28W 3/8-24W 7/16-20W 9/16-18W 5/8-18W TYPE SINGLE OR OULE EN Order retention knobs separately, specify machine make and model #. EPTH FOR OULE ENE ENMILLS EXTENE LENGTH NUMER E F SET SREW ENMILL TYPE V40E-018-600 V40E-025-600 V40E-038-600 V40E-050-600 V40E-062-600 V40E-075-600 V40E-088-600 V40E-100-600 V40E-125-600.1875.250.375.500.625.750.875 0 1.250.68.88 1.25 1.50 1.75 6.00 6.00 6.00 6.00 6.00 6.00 6.00 6.00 6.00 3.62 4.50.44.44.74.88.94 1.12 1.12.81 1/4-28W 1/4-28W 3/8-24W 7/16-20W 9/16-18W 5/8-18W 5/8-18W 3/4-16W 3/4-16W SINGLE OR OULE EN SINGLE EN Order retention knobs separately, specify machine make and model #. 40
riney V 40 FLNGE METRI STNR LENGTH SET ENMILL E F NUMER SREW TYPE V40E-6MM-250 V40E-8MM-250 V40E-10MM-250 V40E-12MM-262 V40E-16MM-375 V40E-20MM-375 6MM 8MM 10MM 12MM 16MM 20MM.88 1.25 1.50 1.75 2.62 3.75 3.75 3.62.44.44.74.88.94 M6 W M8 W M10 W M12 W M16 W M16 W OULE EN Order retention knobs separately, specify machine make and model #. METRI EN MILL PTERS NUMER MORSE TPER MORSE TPER PTERS V FLNGE TOOLING V40-MT1 1.475 1.75 V40-MT2 2.700 1.25 2.44 V40-MT3 3.938 1.62 V40-MT4 4 1.231 3.75 Order retention knobs separately, specify machine make and model #. NUMER JOS TPER JOS TPER PTERS V40-JT2 2.559 V40-JT3 3.811 V40-JT4 4 1.12 V40-JT6 6.676 V40-JT33 33.624 Order retention knobs separately, specify machine make and model #. rill chucks sold separately, pages 91 and 92. OULE NGLE OLLET HUKS NUMER V40-100-300 V40-180-300 V40-180-500 V40-200-300 V40-200-500 V40-300-300 OLLET SERIES 100 180 180 200 200 300 OLLET RNGE.062-.562 1.39.062-.750 1.70.062-.750 1.70.062-.375 1.125.062-.375 1.125.031-.250.86 Order retention knobs separately, specify machine make and model #. Includes collet nut and standard stop screw. Purchase collets and wrenches separately, pages 87 and 93. NOTE! o not exceed the following torque recommendations: 300-20 ft/lbs. 200-25 ft/lbs. 100-35 ft/lbs. 180-45 ft/lbs. 5.00 5.00 3.82 OLLET NUT N-100 N-180 N-180 N-200 N-200 N-300 STOP SREW 5/8-LH 13/16-LH 13/16-LH 7/16-LH 7/16-LH 5/16-LH OLLET NUT WRENH 10W 18W 18W 20W 20W 30W 41
V 40 FLNGE riney RINEY FLEX OLLET HUKS NUMER V40F-075-272 V40F-100-300 OLLET SERIES F075 F100 OLLET RNGE.109-.750.234-0 1.94 2.72 3.50 3.25 OLLET NUT FN-75 FN-100 STOP SREW 13/16-LH Order retention knobs separately, specify machine make and model #. Includes collet nut and standard stop screw. Purchase collets and wrenches separately, pages 89 and 95. NOTE! ollet must be assembled into collet nut before inserting tool or assembling onto chuck. NOTE! o not exceed the following torque recommendations: F075-60 ft/lbs. F100-75 ft/lbs. OLLET WRENH FG75SW FG100SW V FLNGE TOOLING TG OLLET HUKS * NUMER V40H-075-275 V40H-100-300 V40H-100-400 V40H-100-550 V40H-100-650 V40H-150-488. OLLET SERIES TG075 TG100 TG100 TG100 TG100 TG150 OLLET RNGE.062-.750.093-0.093-0.093-0.093-0.500-1.50 1.87 2.245 2.245 2.245 2.245 3.25 OLLET NUT WRENH Order retention knobs separately, specify machine make and model #. Includes collet nut and standard stop screw. Purchase collets and wrenches separately, pages 88 and 94. NOTE! ollet must be assembled into collet nut before inserting tool or assembling onto chuck. NOTE! o not exceed the following torque recommendations: TG75-60 ft/lbs. TG100-75 ft/lbs. TG150-90 ft/lbs. *No Safety iameter 5.50 6.50 4.88 3.31 3.68 4.68 5.68 7.18 3.22 OLLET NUT TGN-075 TGN-100 TGN-100 TGN-100 TGN-100 TGN-150 STOP SREW 13/16-LH 1-1/8-LH 1-1/8-LH 1-1/8-LH 1-5/8-LH TG075HW TG100HW TG100HW TG100HW TG100HW TG150SW ULTR PREISION OLLET HUKS NUMER V40R-11-300 V40R-16-250 V40R-16-500 V40R-20-275 V40R-20-400 V40R-20-525 V40R-25-250 V40R-25-400 V40R-25-600 V40R-32-238 V40R-32-300 V40R-32-400 V40R-32-600 V40R-40-315 OLLET SERIES R11 R16 R16 R20 R20 R20 R25 R25 R25 R32 R32 R32 R32 R40 OLLET RNGE.019-.276.019-.393.019-.393.039-.512.039-.512.039-.512.039-.630.039-.630.039-.630.078-.787.078-.787.078-.787.078-.787.394-1.339.63 1.10 1.10 1.34 1.34 1.34 1.65 1.65 1.65 1.97 1.97 1.97 1.97 3.07 5.00 5.25 6.00 2.38 6.00 3.15 5.00 OMP NUT RN-11M RN-16 RN-16 RN-20 RN-20 RN-20 RN-25 RN-25 RN-25 RN-32 RN-32 RN-32 RN-32 RN-40 STOP SREW 5/16-LH 7/16-LH 7/16-LH 9/16-LH 9/16-LH 9/16-LH M18LH M18LH M18LH 7/8-LH 7/8-LH 7/8-LH 7/8-LH 1-1/8-LH OLLET NUT WRENH R11MW R16HW R16HW R20HW R20HW R20HW R25SW R25SW R25HW R32SW R32SW R32SW R32SW R40SW Order retention knobs separately, specify machine make and model #. Includes collet nut and standard stop screw. Purchase collets and wrenches separately, pages 90, 96, 97. NOTE! ollet must be assembled into collet nut before inserting tool or assembling onto chuck. NOTE! o not exceed the following torque recommendations: R11-25 ft/lbs. R16-40 ft/lbs. R20-65 ft/lbs. R25-65 ft/lbs. R32-80 ft/lbs. R40-90 ft/lbs. 42
riney V 40 FLNGE NUMER THRE ORING HE MFG. FIT ORING HE PTERS V40H-625-18 V40H-875-20 V40H-150-18 V40H-200-12 5/8-18 7/8-20 1-1/2-18 2-12 1.50 1.80 1.80.45.51.51.62 RIGEPORT #1 ORING H ERIKSON #37 OR #50 RITERION ORING H RITERION ORING H FLYNN #32, 33, 36, 47, 48, 49, 65, 67, 68 Order retention knobs separately, specify machine make and model #. V FLNGE TOOLING NUMER V40-250-600 V40-250-800 V40-400-600 V40-400-800 V40-400-1200 6.00 8.00 6.00 8.00 1 Order retention knobs separately, specify machine make and model #. TPPE HOLE 10-24 x 1/2 10-24 x 1/2 1/4-20 x 3/4 1/4-20 x 3/4 1/4-20 x 3/4 MTERIL PHT 4150 LNK RS NUMER V40PT-200-1000 10.00.0002 Order retention knobs separately, specify machine make and model #. Test bars are calibrated and certified, bar diameters are concentric to taper within.0002. ONENTRIITY PREISION TEST RS 43
V 40 FLNGE riney SHELL MILL PTERS STNR LENGTH NUMER V40SM-075-138 V40SM-100-206 V40SM-125-212 V40SM-150-240.750 0 1.250 1.500 1.75 2.19 2.88 3.81 1.375 2.062 2.125 2.406.68.68.68.94 E KEY.31.38.50.62 F G THRE SREW 3/8-24 1/2-20 5/8-18 3/4-16 Order retention knobs separately, specify machine make & model #. Includes shell screw and drive keys. 5002 5003 5004 5005 V FLNGE TOOLING EXTENE SHELL MILL PTERS EXTENE LENGTH NUMER V40SM-075-400 V40SM-100-400 V40SM-125-400 V40SM-150-400.750 0 1.250 1.500 1.75 2.19 2.88 3.81.68.68.68.94 E KEY.31.38.50.62 F G THRE SREW 3/8-24 1/2-20 5/8-18 3/4-16 Order retention knobs separately, specify machine make & model #. Includes shell screw and drive keys. 5002 5003 5004 5005 STU ROR SREW TYPE NUMER V40S-100-400 V40S-125-400 V40S-150-400 1.25 1.50 SREW 5003 5004 5005 THRE 1/2-20 5/8-18 3/4-16 E SPER 6031 6041 6051 Order retention knobs separately, specify machine make & model #. Includes 2 spacers, 1/4 and 1/2, key and standard shell screw. dditional spacers available, page 74. F KEY.250.312.375 STU ROR NUT TYPE NUMER V40SN-100-400 V40SN-125-400 V40SN-150-400 1.25 1.50 6.19 6.44 6.69 NUT 5040 5050 5060 E KEY.250.312.375 F SPER 6030 6040 6050 Order retention knobs separately, specify machine make & model #. Includes 3 spacers, 1/8, 3/8, 3/4, key and nut. dditional spacers available on page 74. 44
riney V 45 FLNGE V 45 Flange Toolholders are available upon request in these styles: EN MILL PTERS MORSE TPER PTERS JOS TPER PTERS OULE NGLE OLLET HUKS RINEY FLEX OLLET HUKS TG OLLET HUKS ULTR PREISION OLLET HUKS LNK RS SHELL MILL PTERS V FLNGE TOOLING 45
V 50 FLNGE riney EN MILL PTERS V FLNGE TOOLING STU LENGTH NUMER V50E-062-206 V50E-075-206 V50E-100-225 V50E-125-225 V50E-150-275.625.750 1.25 1.50 2.06 2.06 2.25 2.25 E SET SREW 4.50.94 1.12 1.12 1.12 9/16-18W 5/8-18W 3/4-16W 3/4-16W 3/4-16W ENMILL TYPE SINGLE OR OULE SINGLE EN Order retention knobs separately, specify machine make and model #. STNR LENGTH NUMER V50E-018-250.1875 V50E-025-250.250 V50E-031-250.3125 V50E-038-250.375 V50E-044-250.4375 V50E-050-262.500 V50E-062-375.625 V50E-075-375.750 V50E-088-375.875 V50E-100-400 0 V50E-125-400 1.250 V50E-150-400 1.500 V50E-175-400 1.750 V50E-200-562 0.68.875 1.25 1.25 1.50 1.75 3.12 3.75 2.62 3.75 3.75 3.75 5.62 E F SET SREW 4.50 3.50.56.56.56.75.75.88.94 1.12 1.12 1.50 1.12 1.41.81 1.50 1/4-28W 1/4-28W 1/4-28W 3/8-24W 3/8-24W 7/16-20W 9/16-18W 5/8-18W 5/8-18W 3/4-16W 3/4-16W 3/4-16W 3/4-16W 1"-14W Order retention knobs separately, specify machine make and model #. ENMILL TYPE SINGLE OR OULE EN SINGLE EN 46
riney V 50 FLNGE EN MILL PTERS EXTENE LENGTH NUMER E F SET SREW V50E-018-450.1875.68 4.50.56 1/4-28W V50E-025-450.250.875 4.50.56 1/4-28W V50E-031-450.3125.100 4.50.56 1/4-28W V50E-038-450.375 4.50.75 3/8-24W V50E-044-450.4375 1.25 4.50.75 3/8-24W V50E-050-462.500 1.25 4.62.88 7/16-20W V50E-062-575.625 1.50 5.75.94 9/16-18W V50E-075-575.750 1.75 5.75 5/8-18W V50E-088-575.875 5.75.81 5/8-18W V50E-100-600 0 6.00 4.50 1.12 3/4-16W V50E-125-600 1.250 6.00 1.12 3/4-16W V50E-150-600 1.500 6.00 1.50 3/4-16W V50E-200-762 0 3.75 7.62 3.50 1.41 1.50 1"-14W Order retention knobs separately, specify machine make and model #. ENMILL TYPE SINGLE OR OULE EN SINGLE EN V FLNGE TOOLING EPTH FOR OULE ENE ENMILLS EXTR EXTENE LENGTH NUMER V50E-018-650 V50E-025-650 V50E-031-650 V50E-038-650 V50E-044-650 V50E-050-662 V50E-062-775 V50E-075-775 V50E-088-775 V50E-100-800 V50E-125-800 V50E-150-800 V50E-200-962.1875.250.3125.375.4375.500.625.750.875 0 1.250 1.500 0.68.875 1.25 1.25 1.50 1.75 3.75 6.50 6.50 6.50 6.50 6.50 6.62 7.75 7.75 7.75 8.00 8.00 8.00 9.62 E F SET SREW 4.50 3.50.56.56.56.75.75.88.94 1.12 1.12 1.50 1.41.81 1.50 1/4-28W 1/4-28W 1/4-28W 3/8-24W 3/8-24W 7/16-20W 9/16-18W 5/8-18W 5/8-18W 3/4-16W 3/4-16W 3/4-16W 1"-14-W Order retention knobs separately, specify machine make and model #. ENMILL TYPE SINGLE OR OULE EN SINGLE EN 47
V 50 FLNGE riney V FLNGE TOOLING METRI EN MILL PTERS MORSE TPER PTERS METRI STNR LENGTH SET ENMILL E F NUMER SREW TYPE V50E-6MM-250 V50E-8MM-250 V50E-10MM-250 V50E-12MM-262 V50E-16MM-375 V50E-20MM-375 V50E-25-MM-400 V50E-32MM-400 6MM 8MM 10MM 12MM 16MM 20MM 25MM 32MM.875 1.25 1.50 1.75 2.62 3.75 3.75 4.50 2.52.44.44.74.88.94 1.12 1.12 M6 W M8 W M10 W M12 W M16 W M16 W M20 W M20 W OULE EN OULE EN SINGLE EN Order retention knobs separately, specify machine make and model #. NUMER V50-MT2 V50-MT3 V50-MT4 V50-MT5 MORSE TPER 2 3 4 5.700.938 1.231 1.748 Order retention knobs separately, specify machine make and model #. 3.38 3.75 1.25 1.62 JOS TPER PTERS NUMER JOS TPER V50-JT2 V50-JT3 V50-JT4 V50-JT6 V50-JT33 2 3 4 6 33.559.811 1.12.676.624 Order retention knobs separately, specify machine make and model #. rill chucks sold separately, pages 91 and 92. OULE NGLE OLLET HUKS NUMER V50-100-300 V50-100-600 V50-180-300 V50-180-600 OLLET SERIES 100 100 180 180 OLLET RNGE.062-.56.062-.56.062-.75.062-.75 1.39 1.39 1.70 1.70 6.00 6.00 4.04 4.04 OLLET NUT N-100 N-100 N-180 N-180 STOP SREW 5/8-LH 5/8-LH 13/16-LH 13/16-LH OLLET NUT WRENH 10W 10W 18W 18W Order retention knobs separately, specify machine make and model #. Includes collet nut and standard stop screw. Purchase collets and wrenches separately, pages 87 and 93. NOTE! o not exceed the following torque recommendations: 100-35 ft/lbs. 180-45 ft/lbs. 48
riney V 50 FLNGE NUMER V50F-100-300 V50F-100-600 OLLET SERIES F100 F100 OLLET RNGE.118-.118- Order retention knobs separately, specify machine make and model #. Includes collet nut and standard stop screw. Purchase collets and wrenches separately, pages 89 and 95. NOTE! ollet must be assembled into collet nut before inserting tool or assembling onto chuck. NOTE! o not exceed the following torque recommendations: F100-75 ft/lbs. 6.00 4.44 6.00 OLLET NUT FN-100 FN-100 STOP SREW 1-1/8-LH 1-1/8-LH OLLET NUT WRENH FG100SW FG100SW RINEY FLEX OLLET HUKS NUMER OLLET SERIES OLLET RNGE V50H-100-300 V50H-100-550 V50H-100-750 V50H-150-300 V50H-150-500 V50H-150-700 TG100 TG100 TG100 TG150 TG150 TG150.093-0.093-0.093-0.500-1.500.500-1.500.500-1.500 2.245 2.245 2.245 3.25 3.25 3.25 5.50 7.50 5.00 7.00 4.50 7.00 9.00 4.50 7.00 9.00 TGN-100 TGN-100 TGN-100 TGN-150 TGN-150 TGN-150 1-1/8-LH 1-1/8-LH 1-1/8-LH 1-5/8-LH 1-5/8-LH 1-5/8-LH TG100HW TG100HW TG100HW TG150SW TG150SW TG150SW Order retention knobs separately, specify machine make and model #. Includes collet nut and standard stop screw. Purchase collets and wrenches separately, pages 88 and 94. NOTE! ollet must be assembled into collet nut before inserting tool or assembling onto chuck. NOTE! o not exceed the following torque recommendations: TG100-75 ft/lbs. TG150-90 ft/lbs. TG200-120 ft/lbs. OLLET NUT STOP SREW OLLET NUT WRENH TG OLLET HUKS V FLNGE TOOLING NUMER V50R-16-400 V50R-16-500 V50R-16-700 V50R-20-400 V50R-20-600 V50R-25-400 V50R-25-600 V50R-32-400 V50R-32-650 V50R-40-400 V50R-40-630 V50R-50-400 OLLET OLLET SERIES RNGE R16 R16 R16 R20 R20 R25 R25 R32 R32 R40 R40 R50.019-.393.019-.393.019-.393.039-.511.039-.511.039-.630.039-.630.078-.787.078-.787.118-1.024.118-1.024.394-1.339 1.10 1.10 1.10 1.34 1.34 1.65 1.65 1.97 1.97 2.48 2.48 3.07 5.00 7.00 6.00 6.00 6.50 6.30 OLLET NUT RN-16 RN-16 RN-16 RN-20 RN-20 RN-25 RN-25 RN-32 RN-32 RN-40 RN-40 RN-50 STOP SREW 7/16-LH 7/16-LH 7/16-LH 9/16-LH 9/16-LH M18LH M18LH 7/8-LH 7/8-LH 1-1/8-LH 1-1/8-LH 1-1/2-LH OLLET NUT WRENH R16HW R16HW R16HW R20HW R20HW R25SW R25SW R32SW R32SW R40SW R40SW R50SW ULTR PREISION OLLET HUKS Order retention knobs separately, specify machine make and model #. Includes collet nut and standard stop screw. Purchase collets and wrenches separately, pages 90, 96 and 97. NOTE! ollet must be assembled into collet nut before inserting tool or assembling onto chuck. NOTE! o not exceed the following torque recommendations: R16-40 ft/lbs. R20-65 ft/lbs. R25-65 ft/lbs. R32-80 ft/lbs. R40-90 ft/lbs. R50-90 ft/lbs. 49
V 50 FLNGE riney ORING HE PTERS NUMER V50H-625-18 V50H-150-18 V50H-200-12 THRE 5/8-18 1-1/2-18 2"-12 ORING HE MFG. 2.18 2.18 2.18.44.44.44 ERIKSON #37 OR #50 RITERION, SPI & YUS FLYNN SERIES #32, 33, 36, 47, 48, 49, 65, 67, 68 Order retention knobs separately, specify machine make and model #. V FLNGE TOOLING LNK RS NUMER TPPE HOLE MTERIL V50-400-600 V50-400-800 V50-600-1200 6.00 6.00 8.00 1 1/4-20 x 3/4 1/4-20 x 3/4 1/4-20 x 3/4 PHT 4150 Order retention knobs separately, specify machine make and model #. PREISION TEST RS NUMER V50PT-200-1200 1.0002 Order retention knobs separately, specify machine make and model #. Test bars are calibrated and certified, bar diameters are concentric to taper within.0002. ONENTRIITY UTOMOTIVE SHNK PTER NUMER V50-106 V50-138 1.062 1.375 3.375 4.25 Order retention knobs separately, specify machine make and model #. 50
riney V 50 FLNGE NUMER V50SM-075-150.750 0 1.50.68.31 3/8-24 5002 V50SM-075-350.750 1.750 3.50.68.31 3/8-24 5002 V50SM-075-550.750 1.750 5.50.68.31 3/8-24 5002 V50SM-100-200 0 2.190.68.38 1/2-20 5003 V50SM-100-400 0 2.190.68.38 1/2-20 5003 V50SM-100-600 0 2.190 6.00.68.38 1/2-20 5003 V50SM-125-150 1.250 0 1.50.68.50 5/8-18 5004 V50SM-125-350 1.250 2.880 3.50.68.50 5/8-18 5004 V50SM-125-550 1.250 2.880 5.50.68.50 5/8-18 5004 V50SM-150-240 1.500 3.810 2.40.93.62 3/4-16 5005 V50SM-150-400 1.500 3.810.93.62 3/4-16 5005 V50SM-150-600 1.500 3.810 6.00.93.62 3/4-16 5005 V50SM-200-240 0 4.875 2.40.93.75 1"-14 5006 * V50SM-200-400 0 4.875.93.75 1"-14 5006 * V50SM-200-600 0 4.875 6.00.93.75 1"-14 5006 * V50SM-250-240 0 4.875 2.40 1.125 1"-14 5007 * V50SM-250-400 0 4.875 1.125 1"-14 5007 * V50SM-250-600 0 4.875 6.00 1.125 1"-14 5007 * Order retention knobs separately, specify machine make and model #. Includes shell screw and drive keys. Includes 4 5/8-11 tapped holes on a 4" bolt circle. * E KEY F G THRE SREW SHELL MILL PTERS V FLNGE TOOLING NUMER SREW THRE E SPER F KEY V50S-125-400 V50S-150-400 1.25 1.50 5004 5005 5/8-18 3/4-16 6041 6051.312.375 Order retention knobs separately, specify machine make and model #. Includes 1/4 and 1/2 spacers, key and shell screw. dditional spacers available, page 74. STU ROR SREW TYPE NUMER V50SN-125-400 V50SN-150-400 1.25 1.50 6.44 6.69 5040 5060.312.375 6040 6050 Order retention knobs separately, specify machine make and model #. Includes 3 spacers, 1/8, 3/8, 3/4, key and nut. dditional spacers available, page 74. NUT E KEY F SPER STU ROR NUT TYPE 51
T 30 FLNGE riney EN MILL PTERS NUMER E F SET SREW 1/4-28W 1/4-28W 3/8-24W 7/16-20W 9/16-18W 5/8-18W 5/8-18W 3/4-16W T30E-018-250 T30E-025-250 T30E-038-250 T30E-050-250 T30E-062-300 T30E-075-300 T30E-088-400 T30E-100-400.1875.250.375.500.625.750.875 0.68.875 1.25 1.50 1.75 2.62 2.63 3.13.44.44.75.88.94 1.12.81 Order retention knobs separately, specify machine make and model #. ENMILL TYPE SINGLE OR OULE EN SINGLE EN T FLNGE TOOLING JOS TPER PTERS NUMER TPER T30-JT2 T30-JT3 T30-JT33 2 3 33.559.811.624 Order retention knobs separately, specify machine make and model #. rill chucks sold separately, pages 91 and 92..870 1.22 1.09 TG OLLET HUKS NUMER OLLET SERIES OLLET RNGE OLLET NUT STOP OLLET NUT SREW WRENH T30H-075-300 TG075.062-.750 1.87 3.12 TGN-075 TG075HW Order retention knobs separately, specify machine make and model #. Includes collet nut and standard stop screw. Purchase collets and wrenches separately, pages 88 and 94. NOTE! ollet must be assembled into collet nut before inserting tool or assembling onto chuck. NOTE! o not exceed the following torque recommendations: TG75-60 ft/lbs. 52
riney T 30 FLNGE NUMER T30R-16-275 T30R-32-275 OLLET SERIES R16 R32 OLLET RNGE.019-.393.078-.787 1.10 1.97 OLLET NUT RN-16 RN-32 STOP OLLET NUT SREW WRENH 7/16-LH R16HW R32SW Order retention knobs separately, specify machine make and model #. Includes collet nut and standard stop screw. Purchase collets and wrenches separately, pages 90, 96 and 97. NOTE! ollet must be assembled into collet nut before inserting tool or assembling onto chuck. NOTE! o not exceed the following torque recommendations: R16-40 ft/lbs. R32-80 ft/lbs. ULTR PREISION OLLET HUKS NUMER E KEY F THRE G SREW T30SM-075-200 T30SM-100-200.750 0 1.750 2.19.687.687.31.38 3/8-24 1/2-20 5002 5003 Order retention knobs separately, specify machine make and model #. Includes shell screw and drive keys. SHELL MILL PTERS T FLNGE TOOLING T 35 FLNGE T 35 Flange Toolholders are available upon request in these styles: EN MILL PTERS JOS TPER PTERS TG OLLET HUKS ULTR PREISION OLLET HUKS SHELL MILL PTERS 53
T 40 FLNGE riney EN MILL PTERS STU LENGTH SET ENMILL E NUMER SREW TYPE T40E-050-175.500 1.25 1.75.88 7/16-20W T40E-062-175.625 1.50 1.75 2.38.94 9/16-18W SINGLE T40E-075-175.750 1.75 1.75 2.25 5/8-18W EN T40E-100-175 0 1.75 1.12 3/4-16W T40E-125-200 1.250 2.25 1.12 3/4-16W Order retention knobs separately, specify machine make and model #. T FLNGE TOOLING STNR LENGTH NUMER T40E-018-250 T40E-025-250.1875.250.68.88 E F.44.44 SET SREW 1/4-28W 1/4-28W ENMILL TYPE T40E-031-250.3125.44 1/4-28W T40E-038-250 T40E-044-250 T40E-050-262 T40E-062-375 T40E-075-375.375.4375.500.625.750 1.25 1.25 1.50 1.75 2.62 3.75 3.75 3.62.74.74.88.94 3/8-24W 3/8-24W 7/16-20W 9/16-18W 5/8-18W SINGLE OR OULE EN T40E-088-400.875.81 5/8-18W T40E-100-400 0 4.50 1.12 3/4-16W T40E-125-425 1.250 4.25 1.12 3/4-16W SINGLE T40E-150-462 1.500 4.62 1.12 3/4-16W SINGLE Order retention knobs separately, specify machine make and model #. EXTENE LENGTH NUMER E SET SREW TYPE T40E-038-600 T40E-050-600 T40E-062-600 T40E-075-600 T40E-088-600.375.500.625.750 0 1.50 1.75 6.00 6.00 6.00 6.00 6.00 3.62.74.88.94 3/8-24W 7/16-20W 9/16-18W 5/8-18W 3/4-16W SINGLE OR OULE EN Order retention knobs separately, specify machine make and model #. 54
riney T 40 FLNGE NUMER TPER MORSE TPER PTERS T40-MT2 2.700 T40-MT3 3.938 T40-MT4 4 1.231 Order retention knobs separately, specify machine make and model #. 1.25 1.62 2.44 3.75 NUMER T40-JT2 T40-JT3 T40-JT4 T40-JT6 T40-JT33 TPER 2 3 4 6 33.559.811 1.12.676.624 Order retention knobs separately, specify machine make and model #. rill chucks sold separately, pages 91 and 92..875 1.21 1.65 JOS TPER PTERS T FLNGE TOOLING NUMER T40-100-300 T40-180-300 T40-200-300 OLLET SERIES 100 180 200 OLLET RNGE.062-.562.062-.750.062-.375 1.39 1.70 1.125 OLLET NUT N-100 N-180 N-200 STOP SREW 9/16-LH 13/16-LH 7/16-LH OLLET NUT WRENH 10W 18W 20W Order retention knobs separately, specify machine make and model #. Includes collet nut and standard stop screw. Purchase collets and wrenches separately, pages 87 and 93. NOTE! o not exceed the following torque recommendations: 300-20 ft/lbs. 200-25 ft/lbs. 100-35 ft/lbs. 180-45 ft/lbs. OULE NGLE OLLET HUKS 55
T 40 FLNGE riney RINEY FLEX OLLET HUKS NUMER T40F-075-256 T40F-100-315 OLLET SERIES F75 F100 OLLET RNGE.109-3/4.218-1.94 2.56 3.15 3.12 3.25 OLLET NUT FN-75 FN-100 STOP SREW 13/16-LH 1-1/8-LH OLLET NUT WRENH FG75SW FG100SW Order retention knobs separately, specify machine make and model #. Includes collet nut and standard stop screw. Purchase collets and wrenches separately, pages 89 and 95. NOTE! ollet must be assembled into collet nut before inserting tool or assembling onto chuck. NOTE! o not exceed the following torque recommendations: F075-60 ft/lbs. F100-75 ft/lbs. T FLNGE TOOLING TG OLLET HUKS NUMER T40H-075-275 T40H-100-300 T40H-100-500 OLLET OLLET SERIES RNGE TG075.062-.750 TG100.093-0 TG100.093-0 1.87 2.245 2.245 5.00 3.31 3.68 5.68 OLLET NUT TGN-075 TGN-100 TGN-100 STOP SREW 13/16-LH 1-1/8-LH 1-1/8-LH TG075HW TG100HW TG100HW Order retention knobs separately, specify machine make and model #. Includes collet nut and standard stop screw. Purchase collets and wrenches separately, pages 88 and 94. NOTE! ollet must be assembled into collet nut before inserting tool or assembling onto chuck. NOTE! o not exceed the following torque recommendations: TG075-60 ft/lbs. TG100-75 ft/lbs. OLLET NUT WRENH ULTR PREISION OLLET HUKS NUMER T40R-16-250 T40R-16-500 T40R-20-275 T40R-20-400 T40R-20-531 T40R-25-590 T40R-32-300 T40R-40-315 OLLET OLLET SERIES RNGE R16 R16 R20 R20 R20 R25 R32 R40.019-.393.019-.393.039-.511.039-.511.039-.511.039-.630.078-.787.110-1.024 1.10 1.10 1.34 1.34 1.34 1.65 1.97 2.48 5.00 5.31 5.90 3.15 2.85 3.25 OLLET NUT RN-16 RN-16 RN-20 RN-20 RN-20 RN-25 RN-32 RN-40 STOP SREW 7/16-LH 7/16-LH 9/16-LH 9/16-LH 9/16-LH M18LH 7/8-LH 1-1/8-LH OLLET NUT WRENH R16HW R16HW R20HW R20HW R20HW R25HW R32SW R40SW Order retention knobs separately, specify machine make and model #. Includes collet nut and standard stop screw. Purchase collets and wrenches separately, pages 90, 96 and 97. NOTE! ollet must be assembled into collet nut before inserting tool or assembling onto chuck. NOTE! o not exceed the following torque recommendations: R16-40 ft/lbs. R20-65 ft/lbs. R25-65 ft/lbs. R32-80 ft/lbs. R40-90 ft/lbs. 56
riney T 40 FLNGE NUMER T40-250-600 Order retention knobs separately, specify machine make and model #. TPPE HOLE MTERIL 6.00 10-24 x 1/2 PHT 4150 LNK RS NUMER T40PT-200-1000 10.00.0002 Order retention knobs separately, specify machine make and model #. Test bars are calibrated and certified, bar diameter is concentric to taper within.0002. ONENTRIITY PREISION TEST RS T FLNGE TOOLING NUMER G SREW T40SM-075-138.750 1.75 1.375.68.31 3/8-24 5002 T40SM-100-206 0 2.19 2.06.68.38 1/2-20 5003 T40SM-125-212 1.250 2.88 2.12.68.50 5/8-18 5004 T40SM-150-240 1.500 3.81 2.40.94.62 3/4-16 5005 Order retention knobs separately, specify machine make and model #. Includes shell screw and drive keys. E KEY F SHELL MILL PTERS 57
T 50 FLNGE riney EN MILL PTERS NUMER E F SET SREW T50E-038-300 T50E-050-300 T50E-062-300 T50E-075-300 T50E-088-400 T50E-100-400 T50E-125-400 T50E-150-462 T50E-200-525.375.500.625.750.875 0 1.250 1.500 0 1.25 1.50 1.75 3.75 4.62 5.25 4.50 3.50.750.875.937 0 0 1.125 1.125 1.125 1.406.81 1.50 3/8-24W 7/16-20W 9/16-18W 5/8-18W 5/8-18W 3/4-16W 3/4-16W 3/4-16W 1-14W Order retention knobs separately, specify machine make and model #. ENMILL TYPE SINGLE OR OULE EN SINGLE EN T FLNGE TOOLING MORSE TPER PTERS NUMER TPER T50-MT2 2.700 1.25 T50-MT3 3.938 1.62 T50-MT4 4 1.231 3.75 T50-MT5 5 1.748 4.81 Order retention knobs separately, specify machine make and model #. JOS TPER PTERS NUMER TPER T50-JT3 3.811 1.21 T50-JT6 6.676 T50-JT33 33.624 Order retention knobs separately, specify machine make and model #. rill chucks sold separately, pages 91 and 92. 58
riney T 50 FLNGE NUMER T50H-100-350 T50H-100-600 T50H-150-350 OLLET SERIES TG100 TG100 TG150 OLLET RNGE.093-0.093-0.500-1.500 2.245 2.245 3.25 Order retention knobs separately, specify machine make and model #. Includes collet nut and standard stop screw. Purchase collets and wrenches separately, pages 88 and 94. NOTE! ollet must be assembled into collet nut before inserting tool or assembling onto chuck. NOTE! o not exceed the following torque recommendations: TG100-75 ft/lbs. TG150-90 ft/lbs. 3.50 6.00 3.50 4.75 4.15 4.50 OLLET NUT TGN-100 TGN-100 TGN-150 STOP SREW 1-1/8-LH 1-1/8-LH 1-5/8-LH OLLET NUT WRENH TG100HW TG100HW TG150SW TG OLLET HUKS NUMER OLLET SERIES OLLET RNGE T50R-16-532 T50R-20-532 T50R-32-532 T50R-40-315 T50R-50-400 R16 R20 R32 R40 R50.019-.393.039-.511.078-.787.118-1.024.393-1.339 1.10 1.34 1.97 2.48 3.10 5.32 5.32 5.32 3.15 4.50 RN-16 RN-20 RN-32 RN-40 RN-50 7/16-LH 9/16-LH 7/8-LH 1-1/8-LH 1-1/2-LH R16HW R20HW R32SW R40SW R50SW Order retention knobs separately, specify machine make and model #. Includes collet nut and standard stop screw. Purchase collets and wrenches separately, pages 90, 96 and 97. NOTE! ollet must be assembled into collet nut before inserting tool or assembling onto chuck. NOTE! o not exceed the following torque recommendations: R16-40 ft/lbs. R20-70 ft/lbs. R32-80 ft/lbs. R40-90 ft/lbs. R50-90 ft/lbs. OLLET NUT STOP SREW OLLET NUT WRENH ULTR PREISION OLLET HUKS T FLNGE TOOLING NUMER T50-400-600 Order retention knobs separately, specify machine make and model #. TPPE HOLE MTERIL 6.00 1/4-20 x 3/4 PHT 4150 LNK RS 59
T 50 FLNGE riney PREISION TEST RS ONENTRIITY NUMER T50PT-200-1200 1.0002 Order retention knobs separately, specify machine make and model #. Test bars are calibrated and certified, bar diameters are concentric to taper within.0002. T FLNGE TOOLING SHELL MILL PTERS NUMER T50SM-075-200 T50SM-100-200 T50SM-125-200 T50SM-150-240.750 0 1.250 1.500 1.75 2.19 2.88 3.88 2.40.68.68.68.94.31.38.50.62 3/8-24 1/2-20 5/8-18 3/4-16 5002 5003 5004 5005 T50SM-200-350 0 4.88 3.50.94.75 1"-14 5006 * T50SM-250-350 0 4.88 3.50 1.125 1"-14 5007 Order * retention knobs separately, specify machine make and model #. Includes shell screw and drive key. Includes 4 5/8-11 tapped holes on a 4" bolt circle. * E KEY F G THRE SREW 60
riney NMT Q 30 SHNK NUMER E F SET SREWS EN MILL TYPE EN MILL PTERS NMT30E-018-175 NMT30E-025-175 NMT30E-038-175.1875.250.375.688.875 1.75 1.75 1.75.44.44.75 1/4-28W 1/4-28W 3/8-24W SINGLE OR OULE EN NMT30E-050-175 NMT30E-062-175 NMT30E-075-213.500.625.750 1.25 1.44 1.75 1.75 1.75 2.13 3.12 2.13 2.25.88.94 7/16-20W 9/16-18W 5/8-18W SINGLE EN ONLY NMT30E-100-275 NMT30E-125-375 0 1.250 3.75 1.12 1.12 3/4-16W 3/4-16W SINGLE EN ONLY Our Qualified Flange will fit Erickson Tool hange System. NUMER NMT30-JT2 NMT30-JT3 JOS TPER 2 3.559.811.88 1.21 JOS TPER PTERS NMT Q TOOLING NMT30-JT33 33.624 Our Qualified Flange will fit Erickson Tool hange System. rill chucks sold separately, pages 91 and 92. NUMER NMT30-180-300 NMT30-200-300 NMT30-300-162 OLLET SERIES 180 200 300 OLLET RNGE.062-.750.062-.375.031-.250 1.70 1.13.860 Includes collet nut and standard stop screw. Purchase collets and wrenches separately, pages 87 and 93. Our Qualified Flange will fit Erickson Tool hange System. NOTE! o not exceed the following torque recommendations: 300-20 ft/lbs. 200-25 ft/lbs. 180-45 ft/lbs. 1.62 3.12 3.80 2.24 OLLET NUT N180 N200 N300 STOP SREW 13/16-LH 7/16-LH 5/16-LH OLLET NUT WRENH 18W 20W 30W OULE NGLE OLLET HUKS 61
NMT Q 30 SHNK riney TG OLLET HUKS OLLET OLLET OLLET STOP OLLET NUT NUMER SERIES RNGE NUT SREW WRENH NMT30H-075-275 TG075.062-.750 1.87 3.06 TGN-075 13/16-LH TG075HW Includes collet nut and standard stop screw. Purchase collets and wrenches separately, pages 88 and 94 NOTE! ollet must be assembled into collet nut before inserting tool or assembling onto chuck. Our Qualified Flange will fit Erickson Tool hange System. NOTE! o not exceed the following torque recommendations: TG75-60 ft/lbs. NMT Q TOOLING SHELL MILL PTERS NUMER NMT30SM-075-131.750 1.750 1.312.687 NMT30SM-100-131 0 2.190 1.312.687 NMT30SM-125-144 1.250 2.880 1.438.687 Includes shell screw and drive keys. Our Qualified Flange will fit EricksonTool hange System. E KEY.31.38.50 F THRE 3/8-24 1/2-20 5/8-18 G SREW 5002 5003 5004 62
riney NMT Q 40 SHNK NUMER E F SET SREW EN MILL TYPE EN MILL PTERS NMT40E-018-231 NMT40E-025-231 NMT40E-038-231 NMT40E-050-231 NMT40E-062-231 NMT40E-075-231 NMT40E-100-300 NMT40E-125-306 NMT40E-150-395.1875.250.375.500.625.750 0 1.250 1.500.688.875 1.25 1.50 1.75 1.90 2.31 2.31 2.31 2.31 2.31 2.31 3.06 3.95 3.62 4.25.44.44.74.88.94 1.12 1.12 1.12 1/4-28W 1/4-28W 3/8-24W 7/16-20W 9/16-18W 5/8-18W 3/4-16W 3/4-16W 3/4-16W SINGLE OR OULE EN SINGLE EN Our Qualified Flange will fit Erickson Tool hange System. NUMER NMT40-MT2 NMT40-MT3 NMT40-MT4 MORSE TPER 2 3 4.700.938 1.231 1.25 1.62 3.50 Our Qualified Flange will fit Erickson Tool hange System. 1.25 1.75 MORSE TPER PTERS NMT Q TOOLING NUMER NMT40-JT2 NMT40-JT3 NMT40-JT4 NMT40-JT6 NMT40-JT33 JOS TPER 2 3 4 6 33.559.811 1.12.676.624.88 1.21 1.66 Our Qualified Flange will fit Erickson Tool hange System. rill chucks sold separately, pages 91 and 92. JOS TPER PTERS 63
NMT Q 40 SHNK riney TG OLLET HUKS NUMER OLLET SERIES OLLET RNGE OLLET NUT STOP SREW OLLET NUT WRENH NMT40H-075-275 TG075.062-.750 1.87 3.06 TGN-075 13/16-LH TG075HW NMT40H-100-300 TG100.093-0 2.245 3.68 TGN-100 1-1/8-LH TG100HW Includes collet nut and standard stop screw. Purchase collets separately, pages 88 and 94. Our Qualified Flange will fit Erickson Tool hange System. NOTE! ollet must be assembled into collet nut before inserting tool or assembling onto chuck. NOTE! o not exceed the following torque recommendations: TG75-60 ft/lbs. TG100-75 ft/lbs. TG150-90 ft/lbs. NMT Q TOOLING SHELL MILL PTERS NUMER E KEY F G THRE SREW NMT40SM-075-150.750 1.750 1.500.687.31 3/8-24 5002 NMT40SM-100-150 0 2.190 1.500.687.38 1/2-20 5003 NMT40SM-125-150 1.250 2.880 1.500.687.50 5/8-18 5004 NMT40SM-150-240 1.500 3.810 2.400.937.62 3/4-16 5005 Includes shell screw and drive keys. Our Qualified Flange will fit Erickson Tool hange System. 64
riney NMT Q 50 SHNK NUMER E F SET SREW EN MILL TYPE EN MILL PTERS NMT50E-038-275 NMT50E-050-275 NMT50E-062-275 NMT50E-075-275 NMT50E-100-275 NMT50E-125-275 NMT50E-150-350 NMT50E-200-475.375.500.625.750 0 1.250 1.500 0 1.25 1.50 1.75 3.75 3.50 4.75 4.50 3.50.75.88.94 1.12 1.12 1.12 1.41 1.50 3/8-24W 7/16-20W 9/16-18W 5/8-18W 3/4-16W 3/4-16W 3/4-16W 1"-14W SINGLE OR OULE EN SINGLE EN Our Qualified Flange will fit Erickson Tool hange System. NUMER TPER NMT50-MT2 NMT50-MT3 NMT50-MT4 NMT50-MT5 2 3 4 5.700.938 1.231 1.748 2.44 1.62 3.75 3.75 1.25 1.62 Our Qualified Flange will fit Erickson Tool hange System. MORSE TPER PTERS NMT Q TOOLING NUMER NMT50-JT2 NMT50-JT3 NMT50-JT4 NMT50-JT6 NMT50-JT33 TPER 2 3 4 6 33.559.811 1.12.676.624.88 1.21 1.66 Our Qualified Flange will fit Erickson Tool hange System. rill chucks sold separately, pages 91 and 92. JOS TPER PTERS 65
NMT Q 50 SHNK riney TG OLLET HUKS NUMER OLLET SERIES OLLET RNGE NMT50H-100-300 TG100.093-2.245 3.68 TGN-100 1-1/8-LH TG100HW OLLET NUT STOP SREW Includes collet nut and standard stop screw. Purchase collets and wrenches separately, pages 88 and 94. NOTE! ollet must be assembled into collet nut before inserting tool or assembling onto chuck. Our Qualified Flange will fit Erickson Tool hange System. NOTE! o not exceed the following torque recommendations: TG100-75 ft/lbs. TG150-90 ft/lbs. OLLET NUT WRENH NMT Q TOOLING SHELL MILL PTERS * * NUMER NMT50SM-075-150 NMT50SM-100-150 NMT50SM-125-150 NMT50SM-150-240 NMT50SM-200-240 NMT50SM-250-240.750 0 1.250 1.500 0 0 1.75 2.19 2.88 3.81 4.875 4.875 1.50 1.50 1.50 2.40 2.40 2.40.68.68.68.93.93 1.125 Includes shell screw and drive keys. Our Qualified Flange will fit Erickson Tool hange System. Includes 4 5/8-11 tapped holes on a 4" bolt circle. * E KEY.31.38.50.62.75 F G THRE SREW 3/8-24 1/2-20 5/8-18 3/4-16 1"-14 1"-14 5002 5003 5004 5005 5006 5007 66
riney HSK THE HSK ONNETION The HSK connection is the internationally recognized standard for superior high speed toolholder performance. riney offers the premium toolholder with superior materials and processes. These improvements provide extended wear, superior durability, increased rigidity and dependability. HSK The HSK connection utilizes the combination of face contact and improved taper contact to provide users with: Increased stiffness: 5-7 times higher than steep tapers. Repeatability: Taper and face contact increase positioning accuracy thus reducing run out. Superior High Speed Performance: The short taper and hollow shank design results in a reduction in the holder weight, therefore reducing spindle stresses. Interior taper clamping reduces the effects that centrifical forces generates, at higher speeds. High Torque Transmission: The combination of face contact and taper contact create improved friction. This in conjunction with positive drive key design improve torque transfer under heavy cutting loads. Since its introduction in 1993, HSK has proven to be the new world standard for high speed toolholding. riney combines the HSK connection with improved materials and processes to provide the highest quality HSK toolholders in the industry. 67
HSK SHNK IN 69893 riney FORM For utomatic Tool hange FORM For utomatic Tool hange With dditional Face ontact nd oolant Through Face FORM Manual lamping FORM Manual dditional Face ontact nd oolant Through Face HSK FORM E For Ultra High Speed pplication FORM //E FORM F Ultra High Speed With dditional Face ontact FORM //F 1 2 L1 1 2 L1 32 (1.2598) 24 (.945) 16 (.630) -- -- -- 40 (1.5748) 30 (1.181) 20 (.787) 40 (1.5748) 24 (.945) 16 (.630) 50 (1.9685) 38 (1.496) 25 (.984) 50 (1.9685) 30 (1.181) 20 (.787) 63 (2.4803) 48 (1.890) 32 (1.260) 63 (2.4803) 38 (1.496) 25 (.984) 80 (3.1496) 60 (2.362) 40 (1.575) 80 (3.1496) 48 (1.890) 32 (1.260) 100 (3.9370) 75 (2.953) 50 (1.969) 100 (3.9370) 60 (2.362) 40 (1.575) 125 (4.9213) 95 (3.740) 63 (2.480) 125 (4.9213) 75 (2.953) 50 (1.969) 160 (6.2992) 120 (4.724) 80 (3.150) 160 (6.2992) 95 (3.740) 63 (2.480) 68
riney HSK SHNK IN 69893 riney offers HSK tooling from stock in sizes 63 and 100. hoose riney HSK for maximum rigidity in high speed machining. It s the pinnacle of toolholder stiffness, concentricity and consistent position accuracy. Select the size and style you need from HSK32 thru HSK125 sizes and styles thru E. From stock or manufactured to order. HSK EN MILL PTERS NUMER SHNK SIZE SET SREW HSK63E-018-236 HSK63E-025-236 HSK63E-038-315 HSK63E-050-354 HSK63E-062-394 HSK63E-075-394 HSK63E-100-433 HSK63E-125-433 63 63 63 63 63 63 63 63.1875.2500.3750.5000.6250.7500 0 1.250.688.875 1.25 1.50 1.75 2.362 2.362 3.150 3.543 3.937 3.937 4.330 4.330 1.88 1.81 1.90 2.53 1/4-28W 1/4-28W 3/8-24W 7/16-20W 9/16-18W 5/8-18W 3/4-16W 3/4-16W HSK100E-038-394 100.3750 3.937 1.90 3/8-24W HSK100E-050-394 100.5000 1.25 3.937 2.53 7/16-20W HSK100E-062-394 100.6250 1.50 3.937 9/16-18W HSK100E-075-433 100.7500 1.75 4.330 5/8-18W HSK100E-100-472 100 0 4.724 3/4-16W HSK100E-125-472 100 1.250 4.724 3/4-16W HSK100E-150-472 100 1.500 4.724 3/4-16W Order coolant tubes separately, page 71. 69
HSK SHNK IN 69893 riney HSK OLLET HUK PTERS NUMER SHNK SIZE OLLET RNGE IN./MM OLLET SERIES IN./MM OLLET STOP NUT SREW OLLET NUT WRENH HSK63R-16-65m HSK63.019-.393/.5-10 R16 28mm 2.559/65 51mm RN16 7/16 LH R16HW HSK63R-16-100m HSK63.019-.393/.5-10 R16 28mm 3.937/100 51mm RN16 7/16 LH R16HW HSK63R-16-120m HSK63.019-.393/.5-10 R16 28mm 4.724/120 51mm RN16 7/16 LH R16HW HSK63R-16-160m HSK63.019-.393/.5-10 R16 28mm 6.299/160 51mm RN16 7/16 LH R16HW HSK63R-20-70m HSK63.039-.507/1-13 R20 34mm 6/70 55mm RN20 9/16 LH R20HW HSK63R-20-100m HSK63.039-.507/1-13 R20 34mm 3.937/100 55mm RN20 9/16 LH R20HW HSK63R-20-120m HSK63.039-.507/1-13 R20 34mm 4.724/120 55mm RN20 9/16 LH R20HW HSK63R-20-170m HSK63.039-.507/1-13 R20 34mm 6.693/170 55mm RN20 9/16 LH R20HW HSK63R-25-80m HSK63.039-.624/1-16 R25 42mm 3.150/80 60mm RN25 M18 LH R25SW HSK63R-25-120m HSK63.039-.624/1-16 R25 42mm 4.724/120 60mm RN25 M18 LH R25SW HSK63R-25-175m HSK63.039-.624/1-16 R25 42mm 6.889/175 60mm RN25 M18 LH R25SW HSK63R-32-80m HSK63.078-.787/2-20 R32 50mm 3.937/80 68.5mm RN32 7/8 LH R32SW HSK63R-32-100m HSK63.078-.787/2-20 R32 50mm 3.937/100 68.5mm RN32 7/8 LH R32SW HSK63R-32-130m HSK63.078-.787/2-20 R32 50mm 5.118/130 68.5mm RN32 7/8 LH R32SW HSK63R-32-180m HSK63.078-.787/2-20 R32 50mm 7.087/180 68.5mm RN32 7/8 LH R32SW HSK63R-40-100m HSK63.118-1.024/3-26 R40 63mm 3.937/100 70mm RN40 1-1/8 LH R32SW HSK63R-40-160m HSK63.118-1.024/3-26 R40 63mm 6.299/160 70mm RN40 1-1/8 LH R32SW HSK100R-16-394 HSK100.019 -.393/.5-10 R16 28mm 3.937/100 51mm RN16 7/16 LH R16HW HSK100R-32-394 HSK100.078 -.787/2-20 R32 50mm 3.937/100 51mm RN32 7/8 LH R32SW HSK100R-40-472 HSK100.118-1.024/3-26 R40 63mm 4.724/120 82.5mm RN40 1-1/8 LH R40SW Purchase collets and wrenches separately, pages 90, 96 and 97. Order coolant tubes separately, page 71. SHELL MILL PTERS NUMER HSK63SM-075-197 HSK63.7500 1.750 1.968.68.31 3/8-24 5002 HSK63SM-100-216 HSK63SM-125-216 HSK100SM-075-197 HSK100SM-100-216 HSK100SM-125-216 HSK100SM-150-236 HSK63 HSK63 HSK100 HSK100 HSK100 HSK100 0 1.250.7500 0 1.250 1.500 2.190 2.880 1.750 0 2.880 3.810 2.165 2.165 1.968 2.165 2.165 2.362.68.68.68.68.68.93.38.50.31.38.50.62 1/2-20 5/8-18 3/8-24 1/2-20 5/8-18 3/4-16 5003 5004 5002 5003 5004 5005 70 SHNK SIZE Order coolant tubes separately, page 71. E KEY F THRE G SREW
riney HSK SHNK IN 69893 NUMER TPER SIZE TIT-HSK32 TIT-HSK40 TIT-HSK50 TIT-HSK63 TIT-HSK100 HSK32 HSK40 HSK50 HSK63 HSK100.236.315.394.472.630.216.295.374.452.610 1.012 1.150 1.287 1.425 1.716 M10X1 M12X1 M16X1 M18X1 M24X1.5 HSK OOLNT TUES HSK NUMER TIIW-HSK32 TPER SIZE HSK32.334 4.21 HSK OOLNT TUE WRENHES TIIW-HSK40 HSK40.413 4.40 TIIW-HSK50 HSK50.570 4.60 TIIW-HSK63 HSK63.650 4.80 TIIW-HSK100 HSK100.866 5.55 71
ESSORIES TIGHTENING FIXTURES riney TIGHTENING FIXTURE (LL TPERS) NUMER SHNK SIZE KEY 30TF 35TF 40TF 45TF 50TF 60TF 30 35 40 45 50 60 3.91 4.65 4.65 4.90 6.35 9.00 3.50 6.00.62.62.62.75 ll tightening fixtures fit V flange, T shank and NMT tooling. olt down or use in vise. ESSORIES LOKING TIGHTENING FIXTURE NUMER SHNK SIZE 40LTF 50LTF 40 50 FOR V FLNGE PTERS ONLY For use in any position, to access tool or retention knob. 72
riney ESSORIES NUMER 5001 5002 5003 5004 5005 5006 5007 E.62.88 1.19 1.50 1.865 3.12.34.37.43.37.50.50.62.84 1.25 1.25 1.62 1.93 1.93 1/4-28 3/8-24 1/2-20 5/8-18 3/4-16 1-14 1-14 3/16 1/4 5/16 5/16 3/8 1/2 1/2 SHELL MILL SREWS NUMER K-250 K-312 K-375 K-500 K-625 K-750 K- K-.250.312.375.500.625.750.50.50.59.78.96 1.03 1.38 1.09.13.16.19.25.31.38.50.50.251.313.376.501.626.751 1 1 PTER PILOT SIZE.500.750 0 1.250 1.500 0 0 0 SHELL MILL RIVE KEYS ESSORIES NUMER 10-32W THRE SIZE 10-32 LENGTH.25 EN MILL SET SREWS (WELON FORGE) 1/4-28W 1/4-28.25 3/8-24W 3/8-24.31 7/16-20W 7/16-20.38 9/16-18W 9/16-18.50 5/8-18W 5/8-18.50 3/4-16W 3/4-16.50 1-14W 1-14.88 73
ESSORIES riney STOP SREWS NUMER THRE SIZE 5/16LH 5/16-24LH 7/16LH 7/16-20LH 9/16LH 9/16-18LH 5/8LH 5/8-18LH 13/16LH 13/16-16LH 7/8LH 7/8-14LH 1-1/8LH 1-1/8-16LH 1-1/2LH 1-1/2-12LH 1-5/8LH 1-5/8-12LH Stop screws have coolant thru holes..38.50.50.50.62.62.62.62.62 STU ROR NUTS NUMER 5030 5040 5060 THRE 1.50 1.88 2.08 1.25 1.50 1-14 1-1/4-12 1-1/2-12 ESSORIES STU ROR & STU ROR NUT SPER SETS NUMER 6030 6040 6050 6031 6041 6051 3 1.253 1.503 3 1.253 1.503 1.56 1.88 2.12 1.56 1.88 2.12 Set incl. 1 ea. 1/8-3/8-3/4 1/8-3/8-3/4 1/8-3/8-3/4 1/4-1/2 1/4-1/2 1/4-1/2 74
riney TOOL STORGE MOULR TOOL STORGE SYSTEMS TOOL RTS NUMER *TK-35/40 *TK-45/50 *TK-200 ESRIPTION Tool storage cart Tool storage cart Tool storage cart PITY Holds 54 T35, T40, or V40 shank tools Holds 42 T45, T50, V45, or V50 shank tools Holds 96 QS200 shank tools * Includes your choice of 3 shelves for tooling, collets, or flat shelves. Please specify when ordering. Exact collet shelves must be specified to ensure correct diameter of holes in shelf. TOOL SHELVES NUMER TS-FS TS-32/75S TS-40/100S TS-150S TS-35/40 TS-200 TS-45/50 TS-S TS-#1T TS-#2T ESRIPTION Flat shelf ollet shelf ollet shelf ollet shelf Tooling shelf Tooling shelf Tooling shelf eep shelf Tap collet tray Tap collet tray PITY Flat storage shelf Holds 32 ER32 or TG75 collets Holds 32 ER40 or TG100 collets Holds 18 TG150 collets Holds 18 T35, T40, or V40 shank tools Holds 32 QS200 shank tools Holds 10 T40 or T50 shank tools eep storage shelf with mat Holds 32 #1 series tap adapters Holds 32 #2 series tap adapters TS-FS TS-45/50 ESSORIES TS-32/75S TS-40/100S TS-200 TS-S TS-35/40 TS-150S riney Modular Tool Storage Systems, is the superior choice for all styles of tool shanks. This heavy-duty steel framed mobile kart can be customized to fit your needs. Just choose 3 shelf styles, included in your purchase and add additional shelves now or at a later date. imensions 24" x 24" x 45" HT 75
SPINLEMTE riney SPINLEMTE LENER KIT ESRIPTION NUMER 30-Spindle 30 Taper 3.50 T.P.F. 35-Spindle 35 Taper 3.50 T.P.F. 40-Spindle 40 Taper 3.50 T.P.F. 45-Spindle 45 Taper 3.50 T.P.F. 50-Spindle 50 Taper 3.50 T.P.F. 200-Spindle Q Switch 200 Taper T.P.F. omplete with one set of standard, varnish and polish blades. (Will not work in some Quick hange Spindles due to raw ar will not retract). SPINLEMTE LE KITS NUMER SPINLE 30-ST 35-ST 40-ST 45-ST 50-ST 200-ST 3 lade/set 30-VR 35-VR 40-VR 45-VR 50-VR 200-VR 3 lade/set 30-EP 35-EP 40-EP 45-EP 50-EP 200-EP 6 lade/set 30 35 40 45 50 200 ESSORIES OLLET SPINLEMTE LENER KIT ESRIPTION NUMER TG075-ollet TG75 ollet Taper TG100-ollet TG100 ollet Taper TG150-ollet TG150 ollet Taper R16-ollet ER16 ollet Taper R20-ollet ER20 ollet Taper R25-ollet ER25 ollet Taper R32-ollet ER32 ollet Taper omplete with one set of standard, varnish and polish blades. OLLET SPINLEMTE LE KITS NUMER OLLET SERIES TG075-ST TG100-ST TG150-ST R16-ST R20-ST R25-ST R32-ST 3 lade/set TG075-VR TG100-VR TG150-VR R16-VR R20-VR R25-VR R32-VR 3 lade/set TG075-EP TG100-EP TG150-EP R16-EP R20-EP R25-EP R32-EP 6 lade/set TG75 TG100 TG150 R16 R20 R25 R32 76
riney TPPING PROUTS TPPING PROUTS Through riney Tool Holding, you can order any of the leading brand or type of tapping products you need. oth rigid and tension/compression systems are available off-the-shelf for quick delivery at competitive prices. riney TPPING 77
QUIK HNGE TPPING SYSTEM T/ riney V FLNGE TP HOLERS NUMER WFLK1-V40 WFLK2-V40 WFLK1-V50 WFLK2-V50 WFLK3-V50 HUK SIZE #1 #2 #1 #2 #3 SHNK V40 V40 V50 V50 V50 TP SIZE RNGE 0-9/16 hand,1/8 pipe 5/16-7/8 hand,1/4-1/2 pipe 0-9/16 hand,1/8 pipe 5/16-7/8 hand,1/4-1/2 pipe 13/16-1-3/8 hand,3/4-1" pipe 1.42 2.09 1.42 2.09 3.07 2.955 3.855 2.955 3.855 5.780.300.490.300.490.790.300.490.300.490.790 NOTE: ll holders are 2 piece modular system. Purchase tap adapters separately, page 80. TENSION OMP- RESSION T FLNGE TP HOLERS NUMER WFLK1-T30 WFLK1-T40 WFLK2-T40 WFLK1-T50 WFLK2-T50 WFLK3-T50 HUK TP SIZE SIZE SHNK RNGE #1 #1 #2 #1 #2 #3 T30 T40 T40 T50 T50 T50 0-9/16 hand,1/8 pipe 0-9/16 hand,1/8 pipe 5/16-7/8 hand,1/4-1/2 pipe 0-9/16 hand,1/8 pipe 5/16-7/8 hand,1/4-1/2 pipe 13/16-1-3/8 hand,3/4-1" pipe 1.42 1.42 2.09 1.42 2.09 3.07 3.580 2.642 3.542 3.255 4.355 5.655.300.300.490.300.490.790 NOTE: ll holders are 2 piece modular system. Purchase tap adapters separately, page 80. TENSION OMP- RESSION.300.300.490.300.490.790 ILZ TPPING NMT FLNGE TP HOLERS HUK TP SIZE TENSION OMP- NUMER SIZE SHNK RNGE RESSION WFLK1-NMT40 #1 NMT40 0-9/16 hand,1/8-1/4 pipe 1.42 2.96.300.300 WFLK2-NMT40 #2 NMT40 5/16-7/8 hand,1/4-1/2 pipe 2.09 3.86.490.490 WFLK1-NMT50 #1 NMT50 0-9/16 hand, 1/8-1/4 pipe 1.42 2.96.300.300 WFLK2-NMT50 #2 NMT50 5/16-7/8 hand,1/4-1/2 pipe 2.09 3.86.490.490 WFLK3-NMT50 #3 NMT50 13/16-1-3/8 hand,3/4-1" pipe 3.07 5.16.790.790 NOTE: ll holders are 2 piece modular system. Purchase tap adapters separately, page 80. STRIGHT SHNK TP HOLERS NUMER WFLK1-1"SS HUK SIZE #1 SHNK TP SIZE RNGE 0-9/16 hand,1/8 pipe 1.42 1.580 TENSION.300 OMP- RESSION.300 WFLK2-1"SS #2 5/16-7/8 hand,1/4-1/2 pipe 2.09 2.480.490.490 WFLK3-1.50"SS #3 1.50 13/16-1-3/8 hand,3/4-1" pipe 3.07 3.780.790.790 NOTE: ll holders are 2 piece modular system. Purchase tap adapters separately, page 80. 78 Tapping Head Holders available for all shank sizes on page 84.
riney RIGI QUIK HNGE TPPING SYSTEM NUMER HUK SIZE SHNK TP SIZE RNGE V FLNGE TP HOLERS WF1-V40 WF2-V40 WF1-V50 WF2-V50 WF3-V50 #1 #2 #1 #2 #3 V40 V40 V50 V50 V50 0-9/16 hand,1/8 pipe 5/16-7/8 hand,1/4-1/2 pipe 0-9/16 hand,1/8 pipe 5/16-7/8 hand,1/4-1/2 pipe 13/16-1-3/8 hand,3/4-1" pipe 1.42 2.09 1.42 2.09 3.07 2.955 3.855 2.955 3.855 5.780 NOTE: ll holders are 2 piece modular system. Purchase tap adapters separately, page 80. NUMER HUK SIZE SHNK TP SIZE RNGE T FLNGE TP HOLERS WF1-T30 WF1-T40 WF2-T40 WF1-T50 WF2-T50 WF3-T50 #1 #1 #2 #1 #2 #3 T30 T40 T40 T50 T50 T50 0-9/16 hand,1/8 pipe 0-9/16 hand,1/8 pipe 5/16-7/8 hand,1/4-1/2 pipe 0-9/16 hand,1/8 pipe 5/16-7/8 hand,1/4-1/2 pipe 13/16-1-3/8 hand,3/4-1" pipe 1.42 1.42 2.09 1.42 2.09 3.07 3.580 2.642 3.542 3.255 4.355 5.655 NOTE: ll holders are 2 piece modular system. Purchase tap adapters separately, page 80. NUMER WF1-1"SS WF2-1"SS WF3-1.50"SS HUK SIZE #1 #2 #3 SHNK 1.50 TP SIZE RNGE 0-9/16 hand,1/8 pipe 5/16-7/8 hand,1/4-1/2 pipe 13/16-1-3/8 hand,3/4-1" pipe NOTE: ll holders are 2 piece modular system. Purchase tap adapters separately, page 80. 1.42 2.09 3.07 1.457 2.126 3.350 STRIGHT SHNK TP HOLERS ILZ TPPING Tapping Head Holders available for all shank sizes on page 84. 79
riney How to Order: Select the positive drive OR torque control style and order by part number. dapter size and holder size must match. Positive rive dapter, for positive depth control. Quick hange, change taps or tap sizes in 2 seconds, by hand, without the aid of any tools. Torque ontrol dapter, with safety clutch, protects against breakage of worn taps and when tap bottoms out. Quick hange, change taps or tap sizes in 2 seconds, by hand, without the aid of any tools. ILZ TPPING 80 NUMER POSITIVE RIVE WE1-6 WE1-8 WE1-10 WE1-12 WE1-1/4 WE1-5/16 WE1-3/8 WE1-7/16 WE1-1/2 WE1-9/16 *WER1-1/8SSPT **WER1-1/8LSPT WE1-0012 WE2-5/16 WE2-3/8 WE2-7/16 WE2-1/2 WE2-9/16 WE2-5/8 WE2-11/16 WE2-3/4 WE2-13/16 WE2-7/8 WER2-1/4PT WER2-3/8PT WER2-1/2PT WE2-0013 WE3-13/16 WE3-7/8 WE3-15/16 WE3-1" WE3-1-1/8 WE3-1-1/4 WE3-1-3/8 WER3-3/4PT WER3-1"PT WE3-0009.85.92.92.95.95.98 TORQUE ONTROL NUMER WES1-6 WES1-8 WES1-10 WES1-12 WES1-1/4 WES1-5/16 WES1-3/8 WES1-7/16 WES1-1/2 WES1-9/16 *WESR1-1/8SSPT **WESR1-1/8LSPT.28 1.18.98 1.26 1.05 1.08 1.11 1.17 1.05.85.92.92.95.95.98 1.05 1.08 1.11 1.17 1.05 PTER SIZE 1.05 1.05 12 pc. set WES1-0012 12 pc. set #1 1.49 WES2-5/16 1.49 1.56 WES2-3/8 1.56 1.59 WES2-7/16 1.59 1.62 WES2-1/2 1.62 1.68 WES2-9/16 1.68 1.74 WES2-5/8 1.74.43 1.89 1.81 WES2-11/16 1.34 1.97 1.81 #2 1.87 WES2-3/4 1.87 1.87 WES2-13/16 1.87 1.93 WES2-7/8 1.93 1.18 WESR2-1/4PT 1.18.35 1.24 WESR2-3/8PT 1.24 1.37 WESR2-1/2PT 1.37 #1 HUK TP RNGE 0-9/16 HN 1/8 PIPE PTER TP SIZE #0-#6 #8 #10 #12 1/4 5/16 3/8 7/16 1/2 9/16 1/8 S.S. 1/8 L.S. 0-9/16 hand, 2-1/8 pipe 5/16 3/8 7/16 1/2 9/16 5/8 5/16-7/8 11/16 HN 3/4 13/16 7/8 1/4PT 1/4-1/2 3/8PT PIPE 1/2PT 13 pc. set WES2-0013 13 pc. set #2 5/16-7/8 hand, 1/4-1/2 pipe 2.42 WES3-13/16 2.42 13/16 2.48 WES3-7/8 2.48 7/8 2.48 WES3-15/16 2.48 15/16 13/16 2.54 WES3-1" 2.54 1 THRU.55 2.76 2.61 WES3-1-1/8 1.77 2.83 2.61 #3 1-1/8 1-3/8 2.73 WES3-1-1/4 2.73 1-1/4 HN 2.79 WES3-1-3/8 2.79 1-3/8 1.55 WESR3-3/4PT 1.55 3/4 & 1" 3/4PT.43 1.65 1.68 WESR3-1"PT 1.68 PIPE 1PT 9 pc. set WES3-0009 9 pc. set #3 13/16-1-3/8 hand, 3/4-1" pipe * ccepts tap shank dia..313 ** ccepts tap shank dia..438 Please order by part number. Tap holders sold separately, pages 81, 82.
riney TENSION OMPRESSION TPPING SYSTEM RINEY QUIK HNGE TPPING SYSTEM NUMER HUK SIZE SHNK TP SIZE RNGE T1-V40 T2-V40 T1-V50 T2-V50 T3-V50 #1 #2 #1 #2 #3 V40 V40 V50 V50 V50 0-9/16 hand,1/8 pipe 5/16-7/8 hand,1/4-1/2 pipe 0-9/16 hand,1/8 pipe 5/16-7/8 hand,1/4-1/2 pipe 13/16-1-3/8 hand,3/4-1" pipe 1.42 2.09 1.42 2.09 3.07 2.955 3.855 2.955 3.855 5.780.300.490.300.490.790.300.490.300.490.790 NOTE! ll holders are 2 piece modular system. Purchase tap adapters separately, page 83. TENSION OMP- RESSION V FLNGE TP HOLERS NUMER T1-T30 T1-T40 T2-T40 T1-T50 T2-T50 T3-T50 HUK SIZE #1 #1 #2 #1 #2 #3 SHNK T30 T40 T40 T50 T50 T50 TP SIZE RNGE 0-9/16 hand,1/8 pipe 0-9/16 hand,1/8 pipe 5/16-7/8 hand,1/4-1/2 pipe 0-9/16 hand,1/8 pipe 5/16-7/8 hand,1/4-1/2 pipe 13/16-1-3/8 hand,3/4-1" pipe 1.42 1.42 2.09 1.42 2.09 3.07 3.580 2.642 3.542 3.255 4.355 5.655 TENSION.300.300.490.300.490.790 OMP- RESSION NOTE! ll holders are 2 piece modular system. Purchase tap adapters separately, page 83..300.300.490.300.490.790 T FLNGE TP HOLERS NUMER HUK SIZE SHNK TP SIZE RNGE T1-NMT40 #1 NMT40 0-9/16 hand,1/8-1/4 pipe 1.42 2.96.300.300 T2-NMT40 #2 NMT40 5/16-7/8 hand, 1/4-1/2 pipe 2.09 3.86.490.490 T1-NMT50 T2-NMT50 T3-NMT50 #1 #2 #3 NMT50 NMT50 NMT50 0-9/16 hand, 1/8-1/4 pipe 5/16-7/8 hand,1/4-1/2 pipe 13/16-1-3/8 hand,3/4-1" pipe 1.42 2.09 3.07 2.96 3.86 5.16.300.490.790.300.490.790 NOTE! ll holders are 2 piece modular system. Purchase tap adapters separately, page 83. TENSION OMP- RESSION NMT FLNGE TP HOLERS RINEY TPPING HUK TP SIZE TENSION OMP- NUMER SIZE SHNK RNGE RESSION T1-1"SS T2-1"SS T3-1.50"SS #1 #2 #3 1.50 0-9/16 hand,1/8 pipe 5/16-7/8 hand,1/4-1/2 pipe 13/16-1-3/8 hand,3/4-1" pipe 1.42 2.09 3.07 1.580 2.480 3.780.300.490.790.300.490.790 NOTE! ll holders are 2 piece modular system. Purchase tap adapters separately, page 83. STRIGHT SHNK TP HOLERS Tapping Head Holders available for all shank sizes on page 84. 81
RIGI/SYNHRONIZE QUIK HNGE TPPING SYSTEM riney V FLNGE TP HOLERS NUMER HUK SIZE SHNK TP SIZE RNGE RT1-V40 RT2-V40 RT1-V50 RT2-V50 RT3-V50 #1 #2 #1 #2 #3 V40 V40 V50 V50 V50 0-9/16 hand,1/8 pipe 5/16-7/8 hand,1/4-1/2 pipe 0-9/16 hand,1/8 pipe 5/16-7/8 hand,1/4-1/2 pipe 13/16-1-3/8 hand,3/4-1" pipe 1.42 2.09 1.42 2.09 3.07 2.95 3.55 2.95 3.55 4.62 NOTE! ll holders are 2 piece modular system. Purchase tap adapters separately, page 83. T FLNGE TP HOLERS NUMER HUK SIZE SHNK TP SIZE RNGE RT1-T30 RT1-T40 RT2-T40 RT1-T50 RT2-T50 RT3-T50 #1 #1 #2 #1 #2 #3 T30 T40 T40 T50 T50 T50 0-9/16 hand,1/8 pipe 0-9/16 hand,1/8 pipe 5/16-7/8 hand,1/4-1/2 pipe 0-9/16 hand,1/8 pipe 5/16-7/8 hand,1/4-1/2 pipe 13/16-1-3/8 hand,3/4-1" pipe 1.42 1.42 2.09 1.42 2.09 3.07 3.57 2.63 3.23 3.46 4.05 5.37 NOTE! ll holders are 2 piece modular system. Purchase tap adapters separately, page 83. RINEY TPPING STRIGHT SHNK TP HOLERS NUMER HUK SIZE SHNK TP SIZE RNGE RT1-1"SS RT2-1"SS RT3-150" SS #1 #2 #3 1.50 0-9/16 hand,1/8 pipe 5/16-7/8 hand,1/4-1/2 pipe 13/16-1-3/8 hand,3/4-1" pipe 1.42 2.09 3.07 1.570 2.16 3.25 NOTE! ll holders are 2 piece modular system. Purchase tap adapters separately, page 83. Tapping Head Holders available for all shank sizes on page 84. 82
riney RINEY TP PTERS How to Order: Select the positive drive OR torque control style and order by part number. dapter size and holder size must match. Positive rive dapter, for positive depth control. Quick hange, change taps or tap sizes in 2 seconds, by hand, without the aid of any tools. Torque ontrol dapter, with safety clutch, protects against breakage of worn taps and when tap bottoms out. Quick hange, change taps or tap sizes in 2 seconds, by hand, without the aid of any tools. POSITIVE RIVE TORQUE ONTROL NUMER NUMER WE1-6 WE1-8 WE1-10 WE1-12 WE1-1/4 WE1-5/16 WE1-3/8 WE1-7/16 WE1-1/2 WE1-9/16 WER1-1/8SSPT* WER1-1/8LSPT** WE1-0012 WE2-5/16 WE2-3/8 WE2-7/16 WE2-1/2 WE2-9/16 WE2-5/8 WE2-11/16 WE2-3/4 WE2-13/16 WE2-7/8 WER2-1/4PT WER2-3/8PT WER2-1/2PT WE2-0013 WE3-13/16 WE3-7/8 WE3-15/16 WE3-1" WE3-1-1/8 WE3-1-1/4 WE3-1-3/8 WER3-3/4PT WER3-1"PT WE3-0009.85.92.92.95.95.98 WES1-6 WES1-8 WES1-10 WES1-12 WES1-1/4 WES1-5/16 WES1-3/8 WES1-7/16 WES1-1/2 WES1-9/16 WESR1-1/8SSPT* WESR1-1/8LSPT**.28 1.18.98 1.26 1.05 1.08 1.11 1.17 1.05.85.92.92.95.95.98 1.05 1.08 1.11 1.17 1.05 1.05 1.05 12 pc. set WES1-0012 12 pc. set #1 1.49 WES2-5/16 1.49 1.56 WES2-3/8 1.56 1.59 WES2-7/16 1.59 1.62 WES2-1/2 1.62 1.68 WES2-9/16 1.68 1.74 WES2-5/8 1.74.43 1.89 1.81 WES2-11/16 1.34 1.97 1.81 #2 1.87 WES2-3/4 1.87 1.87 WES2-13/16 1.87 1.93 WES2-7/8 1.93 1.18 WESR2-1/4PT 1.18.35 1.24 WESR2-3/8PT 1.24 1.37 WESR2-1/2PT 1.37 13 pc. set WES2-0013 13 pc. set 2.42 2.48 2.48 2.54.55 2.76 2.61 2.73 2.79.43 1.55 1.68 PTER SIZE #1 #3 HUK TP RNGE 0-9/16 HN 1/8 PIPE PTER TP SIZE #0-#6 #8 #10 #12 1/4 5/16 3/8 7/16 1/2 9/16 1/8 S.S. 1/8 L.S. 0-9/16 hand, 2-1/8 pipe 5/16 3/8 7/16 1/2 9/16 5/16-7/8 5/8 HN 11/16 3/4 13/16 7/8 1/4-1/2 1/4PT PIPE 3/8PT 1/2PT 5/16-7/8 hand, 1/4-1/2 pipe 13/16 7/8 13/16 15/16 THRU 1 1-3/8 1-1/8 HN 1-1/4 1-3/8 3/4 & 1" 3/4PT PIPE 1PT 9 pc. set #3 13/16-1-3/8 hand, 3/4-1" pipe * ccepts tap shank dia..313 ** ccepts tap shank dia..438 Please order by part number. Tap holders sold separately, pages 81, 82. #2 RINEY TPPING 83
TP HOLER SHNKS riney V FLNGE, T FLNGE, N NMT FLNGE TPPING HE HOLERS V FLNGE NUMER V40-THM-075 V40-THM-100 V50-THM-075 V50-THM-100 V50-THM-150 T30-THM-075 T30-THM-100 T40-THM-075 T40-THM-100 T50-THM-075 T50-THM-100 T50-THM-150 NMT40-THM-100 NMT50-THM-100 NMT50-THM-150.750.750 1.50.750.750.750 1.50 1.50 1.375 1.75 1.75 1.75 1.75 1.38 1.38 1.38 1.38 2.33 1.38 1.38 1.88 1.88 1.88 1.38 1.38 1.38 2.40 2.35 2.40 2.20 3.50 2.40 2.13 2.40 2.20 2.40 2.20 3.60 2.20 2.20 3.60 SET SREW 1/2-20W 1/2-20W 1/2-20W 1/2-20W 1/2-20W 1/2-20W 1/2-20W 1/2-20W 1/2-20W 1/2-20W 1/2-20W 1/2-20W 1/2-20W 1/2-20W 1/2-20W SHNK V40 V40 V50 V50 V50 T30 T30 T40 T40 T50 T50 T50 NMT40 NMT50 NMT50 T FLNGE TPPING NMT FLNGE 84
85 TPPING.120.131.162.201.248.296.252.285.332.370.452.533.244.338.431.541.525 1.04 1.03 1.11 1.18 1.14 1.18 1.33 1.28 1.42 1.51 1.63 2.15 1.15 1.05 1.25 1.35.50.50.50.75.75.75.75.75.75 1.12 1.12 1.12.75.75 1.12 1.12 T0-6-200 T-8-200 T-10-200 T-250-200 T-312-200 T-375-200 T-437-200 T-500-200 T-562-300 T-625-300 T-750-300 T-875-300 PT125S-200 PT125L-200 PT250-200 PT375-300 PT500-300 #0 - #6 #8 #10 1/4 5/16 3/8 7/16 1/2 9/16 5/8 3/4 7/8 1/8 pipe SS 1/8 pipe LS 1/4 pipe 3/8 pipe 1/2 pipe.141.168.194.255.318.381.323.367.429.480.590.697.312.437.562.700.687 NUMER TP SIZE E TP EXTENSIONS riney
86 STRIGHT SHNK NUMER.1250.1875.2500.3125.1250.1875.2500.3125.3750.3750.5000.6250.7500 2.25 2.25 3.12 2.62 3.62 3.75.5000.5000.5000.5000.7500.7500.7500.7500.7500 1.250 1.250 1.250 1.250 SS050E-012-225 SS050E-018-225 SS050E-025-300 SS050E-031-312 SS075E-012-250 SS075E-018-250 SS075E-025-262 SS075E-031-275 SS075E-038-300 SS125E-038-362 SS125E-050-375 SS125E-062-400 SS125E-075-400 EN MILL PTERS SHELL MILL PTERS NUMER E F SREW G KEY.7500 0 0 2.375 2.43 2.43.68.68 1.250 1.250 5002 5003.31.38 SS STRIGHT SHNK H.992.992 SS125SM-075 SS125SM-100 riney
riney SS STRIGHT SHNK NUMER SS050-300-688 SS075-200-723 SS100-100-750 SS125-180-741 OLLET RNGE.047-.250.062-.375.062-.562.062-.750 OLLET SERIES 300 200 100 180.500.750 0 1.250.562.812 1.062 1.437 6.88 7.23 7.50 7.41.500.687.875 1.187 STOP SREW 5/16LH 7/16LH 9/16LH 13/16LH OLLET NUT NP-300 NP-200 NP-100 NP-180 WRENH NP30W NP20W NP10W NP18W OULE NGLE OLLET EXTENSIONS Purchase collets separately, page 93. NOTE! o not exceed the following torque recommendations: 300-20 ft/lbs. 200-25 ft/lbs. 100-35 ft/lbs. 180-45 ft/lbs. NOTE! Nose Piece nut (NP) thread size different from standard nuts (N). NUMER NP TYPE NP-300 NP-200 NP-100 NP-180 N TYPE N-300 N-200 N-100 N-180 OLLET SERIES 300 200 100 180 300 200 100 180.560.810 1.060 1.440.860 1.125 1.390 1.700 1.35 1.50 1.60.700.875.910.875 THRE SIZE 9/16-18 3/4-16 1-14 1-1/4-12 9/16-18 3/4-16 1-14 1-1/4-12 NP TYPE N TYPE OULE NGLE OLLET NUTS NUMER NP-30-W NP-20-W NP-10-W NP-18-W -30-W -20-W -10-W -18-W OLLET NUT NP-300 NP-200 NP-100 NP-180 N-300 N-200 N-100 N-180 1/2 11/16 7/8 1-3/16 3/4 1" 1-1/4 1-1/2 OULE NGLE WRENHES STRIGHT SHNK 87
SS STRIGHT SHNK riney TG OLLET EXTENSIONS NUMER OLLET SERIES OLLET RNGE WRENH SS125H-075-800 SS150H-100-975 SS200H-150-100 TG075 TG100 TG150.062-.750.093-0.500-1.500 1.250 1.500 0 1.87 2.245 3.25 8.00 9.75 10.00 6.00 6.00 TGN-075 TGN-100 TGN-150 13/16LH 1-1/8LH 1-5/8LH TG075HW TG100HW TG150SW Purchase collets separately, page 94. NOTE! ollet must be assembled into collet nut before inserting tool or assembling onto chuck. NOTE! o not exceed the following torque recommendations: TG75-60 ft/lbs. TG100-75 ft/lbs. TG150-90 ft/lbs. OLLET NUT STOP SREW TG OLLET NUTS NUMER TGN-075 TGN-100 * TGN-150 OLLET SERIES TG075 TG100 TG150 1.87 2.245 3.25.910 1.10 1.75 STYLE THRE SIZE 1-1/2-12 1-7/8-12 2-5/8-12 * Hex or Spanner wrenches will work STYLE STYLE TG WRENHES NUMER OLLET NUT STYLE HEX TG075HW TG100HW TG100SW TG150SW TGN-075 TGN-100 TGN-100 TGN-150 1.88 2.25 2.44 3.25 HEX HEX SPNNER SPNNER SPNNER 88
riney SS STRIGHT SHNK NUMER OLLET SERIES OLLET RNGE SS100F-050-750 SS125F-075-800 SS150F-100-975 F50 F75 F100.109-.500.109-.750.218-0 1.25 1.50 1.43 1.94 7.50 8.00 9.75 5.50 6.00 6.75 FN-50 FN-75 FN-100 9/16 LH 13/16 LH 1-1/8 LH FG50HW FG75SW FG100SW Purchase collets separately, page 95. NOTE! ollet must be assembled into collet nut before inserting tool or assembling onto chuck. NOTE! o not exceed the following torque recommendations: F050-40 ft/lbs. F075-60 ft/lbs. F100-75 ft/lbs. OLLET NUT STOP SREW WRENH RINEY FLEX OLLET EXTENSIONS RINEY FLEX OLLET NUTS NUMER OLLET SERIES STYLE THRE SIZE OLLET NUTS FN-50 FN-75 FN-100 F50 F75 F100 1.43 1.94.69 1.06 1.19 HEX SPNNER SPNNER 1-12 1-1/2-12 2-12 NOTE! Interchangeable with Universal ccura-flex nuts. RINEY GRIP OLLET NUTS NUMER OLLET SERIES STYLE THRE SIZE GN-50 GN-75 GN-100 G50 G75 G100 1.25 1.94.88 1.06 1.25 HEX SPNNER SPNNER 1-12 1-1/2-12 2-12 NOTE! Interchangeable with Universal ccura-grip nuts. NUMER FG50HW FG75SW FG100SW OLLET NUT F/GN-50 F/GN-75 F/GN-100 1.25 1.94 STYLE HEX SPNNER SPNNER WRENHES STRIGHT SHNK HEX SPNNER 89
SS STRIGHT SHNK riney ULTR PREISION OLLET EXTENSIONS NUMER SS050R-11-660 SS075R-16-700 SS100R-20-700 SS100R-25-700 SS125R-32-750 OLLET SERIES R11 R16 R20 R25 R32 OLLET RNGE.019-.276.019-.393.039-.511.039-.630.078-.787.500.750 1.25.64.870 1.10 1.61 1.97 6.60 7.00 7.00 7.00 7.50 OLLET STOP NUT SREW WRENH 3.50 RN-11M 5/16LH R11MW RN-16M 7/16LH R16MW RN-20M 9/16LH R20MW RN-25 5/8LH R25SW RN-32 7/8LH R32SW Purchase collets separately, pages 96 and 97. NOTE! ollet must be assembled into collet nut before inserting tool or assembling onto chuck. NOTE! o not exceed the following torque recommendations: R11-25 ft/lbs. R16-40 ft/lbs. R20-70 ft/lbs. R32-80 ft/lbs. R40-90 ft/lbs. ULTR PREISION OLLET NUTS NUMER OLLET NUT STYLE WRENH THRE SIZE STYLE MINI STYLE HEX STYLE SPNNER RN-11M RN-11 RN-16M RN-16 RN-20M RN-20 RN-25 RN-32 RN-40 RN-50 R11 R11 R16 R16 R20 R20 R25 R32 R40 R50.64.74.870 1.10 1.10 1.34 1.61 1.97 2.46 3.10.43.43.670.670.750.750.790.870 1.12 1.39 R11MW R11HW R16MW R16HW R20MW R20HW R25SW R32SW R40SW R50SW M13 x.75 M14 x.75 M19 x 1.0 M22 x 1.5 M24 x 1.0 M25 x 1.5 M32 x 1.5 M40 x 1.5 M50 x 1.5 M64 x 2.0 STRIGHT SHNK ULTR PREISION WRENHES STYLE MINI STYLE HEX NUMER R11MW R11HW R16MW R16HW R20MW R20HW R25SW R32SW R40SW R50SW OLLET NUT RN-11M RN-11 RN-16M RN-16 RN-20M RN-20 RN-25 RN-32 RN-40 RN-50.630.670.870 1.10 1.18 1.65 1.97 2.46 3.10 STYLE STYLE SPNNER 90
riney ESSORIES THE HUK MNUFTURING O. NO. 6223 6228 6230 14442 6295 14445 14451 6309 14865 14866 MOEL NO. 3 3K(2) 3P(3) 34-02 34-06 34-33 34-33(4) 36 36K(2) 36P(3) PITY RNGE IMENSIONS MOUNT KEY MINIMUM MXIMUM LOSE LENGTH OPEN LENGTH SLEEVE JOS NO. IN MM IN MM IN MM IN MM IN MM 0.125 0.125 0.125 0(1) 0(1) 0(1) 0(1) 0.180 0.180 0.180 3 3 3 0 0 0 0 0 5 5 0.625 0.625 0.625 0.500 0.500 0.500 0.500 0.800 0.800 0.800 16 16 16 13 13 13 13 20.3 20.3 20.3 3 JT 3 JT 3 JT 2 JT 6 JT 33 JT 33 JT 3 JT 3 JT 3 JT K3 K3 K3 K3 K3 K3 K3 K4 K4 K4 3.81 4.06 4.06 3.52 3.52 3.52 3.71 4.06 4.25 4.25 96.8 103.1 103.1 89.4 89.4 89.4 94.2 103.1 108.0 108.0 2.87 3.12 3.12 2.74 2.74 2.74 2.93 3.14 3.42 3.42 72.9 79.2 79.2 69.6 69.6 69.6 74.4 79.8 86.9 86.9 2.30 2.29 2.29 2.04 2.04 2.04 2.54 2.54 2.54 58.4 58.2 58.2 51.8 51.8 51.8 50.8 64.5 64.5 64.5 (1) Minimum capacity will hold a No. 70 (.028in/.71 1mm) drill. (2) Equipped with positive drive slot. (3) Equipped with pin-type positive drive. (4) Equipped with locking collar. Features Heavy and Medium uty models for threaded or taper mounting. Jaws center-ground for absolute straightness and alignment. Jaws specially treated to ensure extended thread life and high gripping surface hardness. One-piece sleeve eliminates crack between driving teeth often found in other designs. Through-hardened sleeve teeth, plus hardened nose and keyholes provide outstanding wear resistance. Each chuck 100% inspected for performance and precision. PLIN ERING HUKS The O.E.M. standard for accuracy and durability on all types of industrial power and machine tools. Made in U.S.. NO. 30209 30215 30221 30227 30233 30239 MOEL NO. 8-1/2N 11N 14N 16N 18N 20N PITY RNGE IMENSIONS MOUNT KEY MINIMUM MXIMUM LOSE LENGTH OPEN LENGTH SLEEVE JOS NO. IN MM IN MM IN MM IN MM IN MM 0(1) 0(1) 0(1) 0.125 0.125 0.375 0 0 0 3 3 10 0.250 0.375 0.500 0.625 0.750 6.4 10 13 16 19 25.4 *2JT 2JT 3JT 3JT 4JT 5JT K30 K32 K3 K4 K4 K5 2.41 2.88 3.88 4.31 5.12 5.50 61.2 73.2 98.6 109.5 130.0 139.7 1.95 2.26 2.97 3.26 3.95 4.23 49.5 57.4 75.4 82.8 100.3 107.4 1.56 1.93 2.44 2.63 3.01 3.65 39.7 49.1 62.1 66.9 76.4 92.6 * Short Style (1) Minimum capacity will hold a No. 7 (.028in/.71 1mm) drill. Features all bearing construction maximizes gripping force and drilling accuracy. Jaws center-ground for absolute straightness and alignment. Jaws specially treated to ensure extended thread life and high gripping surface hardness. One-piece sleeve eliminates crack between driving teeth often found in other designs. Through-hardened sleeve teeth, plus hardened nose and keyholes provide outstanding wear resistance. Fluted sleeve standard. Each chuck 100% inspected for performance and precision. LL ERING SUPER HUKS esigned for close tolerance, production drilling on precision equipment. Made in U.S.. RILL HUKS 91
THE HUK MNUFTURING O. ESSORIES riney INUSTRIL KEYLESS HUKS HIGH PREISION MOEL Precision design combines keyless operation with the ultimate in drill chuck accuracy. ertified for maximum.0016" T.I.R. For general machining applications. NO. 9679 9681 9680 9683 9682 9684 9685 MOEL NO. 80-J2S 100-J2 100-J33 130-J2 130-J33 130-J6 160-J6 PITY RNGE (1) IMENSIONS MOUNT MINIMUM MXIMUM LOSE LENGTH OPEN LENGTH SLEEVE JOS IN MM IN MM IN MM IN MM IN MM 0 0 0 0.039 0.039 0.039 0.118 0 0 0 1 1 1 3 0.315 0.394 0.394 0.512 0.512 0.512 0.630 8 10 10 13 13 13 16 J2S J2 J33 J2 J33 J6 J6 2.91 3.50 3.50 3.90 3.90 3.90 4.21 74 89 89 99 99 99 107 2.64 3.19 3.19 3.46 3.46 3.46 3.74.67 81 81 88 88 88 95 1.46 1.61 1.61 1.81 1.81 1.81 2.17 37 41 41 46 46 46 55 Features ertified and guaranteed in writing to.0016" T.I.R. or better. Each chuck precision tested and furnished with an individualized certification number identifying its specific performance characteristics. Self-tightening feature automatically increases gripping force proportional to increased torque to prevent tool shank slippage. ll components exposed to wear are completely hardened to maintain accuracy and extend chuck life. Jacobs taper mount permits use on a wide range of high accuracy drill presses, jig borers, milling machines and production drilling equipment. RILL HUKS HIGH TORQUE / HIGH PREISION MOEL NO. 30526 30527 30528 30529 30530 MOEL NO. 80-J2S 130-J2 130-J33 130-J6 160-J6 PITY RNGE (1) IMENSIONS MOUNT MINIMUM MXIMUM LOSE LENGTH OPEN LENGTH SLEEVE JOS IN MM IN MM IN MM IN MM IN MM 0 0.039 0.039 0.039 0.118 0 1 1 1 3 0.315 0.512 0.512 0.512 0.630 8 13 13 13 16 J2S J2 J33 J6 J6 2.91 3.90 3.90 3.90 4.21 74 99 99 99 107 2.64 3.46 3.46 3.46 3.74 67 88 88 88 95 1.46 1.81 1.81 1.81 2.17 (1) Minimum capacities Models JKP and JKT apacity: 0-8mm rill Size:.012in 0-10mm.020in 1-13mm.033in 3-16mm.114in Features ertified and guaranteed in writing to.0016" T.I.R. or better. For use on N machining centers in drilling, boring, counterboring and milling operations requiring heavy penetration. Furnished with milled wrench flats and spanner wrench to allow the application of supplementary gripping torque. Light tightening increases gripping torque up to 3 times higher than hand tightening. Resists tool loosening on high speed machines with right hand rotation and instant spindle stop. 37 46 46 46 55 92