Laminate Locker Series PL7000 Key Features Wide selection of textured and smooth laminates Single-tier, multi-tier, and Z-style lockers available Over 40 years of industry experience FSC & AWI certified Made in the USA (Irving, Texas), 300,000 ft2 manufacturing facility Page 1 PL7000
INTERIOR OPTIONS Single-Tier Lockers Hollman Standard Size Options Height: 60, 72, 84 Width: 12, 15, 18 Depth: 15, 18, 20 * These sizes represent exterior dimensions. A1 Hollman Standard: upper shelf, coat rod, coat hook, shoe shelf A2 Double shoe shelf A3 Accessory cubbies and double shoe shelf, lockable box Double-Tier Lockers B1 Hollman Standard: coat rod, coat hook s B2 Hanging cubbies Z1 Elongated hanging space, coat rod, coat hooks Multi-Tier Lockers C1 Hollman Standard: coat hooks D1 Hollman Standard: clear storage E1 Hollman Standard: clear storage F1 Hollman Standard: clear storage Page 2 PL7000
FINISH OPTIONS Textured Laminates: Realistic wood texture gives the natural elegance of wood with the benefits of laminate. Each of these designs has been selected by Hollman as an optimum choice for lockers and is available with a custom-produced matching edge band. Cool Spectrum Silver Driftwood, 21947 Sepia Walnut, 21867 Rustic Heather, 21859 Retro Teak, 21870 Charcoal Mahogany, 21948 Rustic Natural, 21860 Blonde Cedar, 21952 Native Cherry, 21868 Chocolate Teak, 21869 Ebony Elm, 21949 Warm Spectrum Bleached Elm, 21950 Interior Color Options: Almond (standard) Page 3 PL7000 White (standard) Gray (standard) Black (premium)
LAMINATE OPTIONS Wilsonart Solid Colored Laminates: Designed specifically to meet the decor needs of athletic projects, these selections also feature AEON Enhanced Performance Technology, which has been proven to dramatically outperform traditional laminate for wear and scuff resistance. D495-60 COFFEE BEAN D495K-18 COFFEE BEAN D96-60 SHADOW D327-60 PEPPERDUST D50-60 KHAKI BROWN D91-60 SLATE GREY 1595-60 BLACK 1595K-01 BLACK 1595K-18 BLACK D381-60 FASHION GREY 1500-60 GREY D97-60 HAZE D90-60 NORTH SEA D92-60 DOVE GREY D315-60 PLATINUM D30-60 NATURAL ALMOND 1531-60 LIGHT BEIGE D439-60 WALLABY D456-60 CAFE CREME D331-60 SAND 1530-60 BEIGE D427-60 NEW 2014 LINEN 1573-60 FROSTY WHITE 1572-60 ANTIQUE WHITE D403-60 WHITE SAND D403K-18 WHITE SAND D431-60 ALABASTER 1503-60 PUTTY 1570-60 WHITE D354-60 DESIGNER WHITE D499-60 NEW 2014 SUNSHINE D501-60 NEW 2014 ORANGE GROVE D497-60 NEW 2014 FLAMINGO D307-60 HOLLYBERRY D14-60 PORT D12K-18 REGIMENTAL RED D498-60 NEW 2014 ISLAND D498K-18 NEW 2014 ISLAND D321-60 BRITTANY BLUE D502-60 NEW 2014 OCEAN D502K-18 NEW 2014 OCEAN D26K-18 PERSIAN BLUE D417-60 LAPIS BLUE D25-60 ATLANTIS D379-60 INDIGO D79-60 HUNTER GREEN D478-60 AMAZON Page 4 PL7000
LAMINATE OPTIONS Wilsonart Textured Laminates: This collection includes Wilsonart s most popular wood grains and other textured laminates 7979K-12 NEW 2014 RED BARN 7978K-12 NEW 2014 BLUE BARN 7977K-12 NEW 2014 WHITE BARN 7972K-12 NEW 2014 TRUSS MAPLE 7973K-12 NEW 2014 OLD MILL OAK 7980K-18 NEW 2 ZEBRAWOOD 7981K-12 NEW 2014 LANDMARK WOOD 7974K-12 NEW 2014 OILED CHESTNUT 7975K-12 NEW 2014 RAW CHESTNUT 7964K-12 SKYLINE WALNUT 7966K-12 5TH AVE. ELM 7960K-18 STUDIO TEAK 7976K-12 NEW 2014 WHITE CYPRESS 7970K-18 HIGH LINE 7967K-12 PARK ELM 7968K-12 LOFT OAK 7933K-07 CAFELLE 7969K-12 WAREHOUSE OAK 7965K-12 WALNUT HEIGHTS 7971K-12 UPTOWN WALNUT 7937-38 RIVER CHERRY 7946-38 BRAZILWOOD 7953-38 HARVEST MAPLE 7925-38 MONTICELLO MAPL 7928-38 CASTLE OAK 7850-60 BEIGEWOOD 7954-38 NATURAL RIFT 7938-38 NEW AGE OAK 7911-60 MANITOBA MAPLE 10776-60 KENSINGTON MAPL 10734-60 LIMBER MAPLE 7943K-07 COLOMBIAN WALNUT 7956K-78 HONDURAN MAHOGANY 7959K-78 HAMPTON WALNUT 7948K-07 MAMBO 7935K-07 SHAKER CHERRY 7909-60 FUSION MAPLE 7922K-07 BRIGHTON WALNUT 7936K-07 WILLIAMSBURG CHERRY 7947K-18 RIO 7957K-78 ZANZIBAR 7054-60 WILD CHERRY Page 5 WD8000
LOCK OPTIONS Keyless1 by Keyless.Co includes a patented master key exchange system that allows the master key to be updated without removing the lock. Users set their own personal combination with each usage. It s wireless, and uses no batteries. Suggested Usage: Day-use or Permanent Ojmar OCS locks utilize a touch technology with no buttons or membrane keypad. They utilize a user-selected four-digit code and are programmable for advanced features including unlock times and usage auditing. Suggested Usage: Day-use Padlock Hasps allow users to bring their own padlocks, providing flexibility and minimal management. ADA compliant padlocks are available for use with these systems as well. This system includes a metal strike plate mounted to the front of the locker and a z-shaped metal plate that is mounted inside the locker and extends through the front plate. Also includes a pull knob. Suggested Usage: Day-use or Permanent H3 Padlock Hasp by Keyless.Co provide a modern, minimalist look. It is designed with an integrated anti-rotation system for added security. Suggested Usage: Day-use or Permanent Page 6 PL7000
ARCHITECTURAL SPECIFICATIONS, SECTION 10500 PLASTIC LAMINATE LOCKERS 1.0 GENERAL 1.1 SECTION INCLUDES A. Custom plastic laminate lockers and accessories. 1.2 RELATED DOCUMENTS A. Section 10500 Wood blocking and curbing: Wood grounds and attachment strips. B. Section 10500 Finish carpentry: Related trim not specified in this section. 1.3 REFERENCES A. Minimum standard for wood lockers shall conform to AWI (Architectural Woodwork Institute) Architectural Woodwork Quality Standards Illustrated. 1.4 QUALITY ASSURANCE A. All parts and hardware shall be AWI compliant, structurally sound and free from defects, in material and workmanship under normal use and service for the full warranty period. 1.5 SUBMITTALS A. Product Data: Available upon request, including: 1. Preparation instructions and recommendations. 2. Storage and handling requirements and recommendations. 3. Installation methods. 4. Product date specific to materials used in construction of locker. B. Shop Drawings: Indicate locker plan layout for Hollman contracted installations, component profiles and elevations, schedule of finishes, and accessories. 1.6 PRODUCT DELIVERY, STORAGE, AND HANDLING A. Store products in a dry, ventilated area until ready for installation. B. Protect finishes from moisture, soiling and damage during handling. 1.7 PROJECT CONDITIONS A. Maintain environmental conditions (temperature, humidity, and ventilation) within limits recommended by manufacturer for optimum results. Do not install products under environmental conditions outside manufacturer s absolute limits. B. During and after installation, maintain same temperature and humidity conditions in building spaces as will occur after occupancy. C. Protect locker finish and adjacent surfaces from damage. 2.0 PRODUCTS 2.1 MANUFACTURERS A. Acceptable Manufacturer: Hollman Inc.; 1825 Walnut Hill Lane, Irving, TX 75038, Toll Free(800) 433-3630, Fax (972) 815-2921, Email: lockers@hollman. com. B. Substitutions: Not permitted. C. Requests for substitutions will be considered in accordance with provisions of Section 01600. 2.2 MATERIALS A. Locker Frame: Tops, sides, and back shall be constructed of 5/8 high density thermo-fused melamine. 1. Expansion / contraction within +/- 1/16 per locker. B. Available Locker Models: 1. Single tier, Model A: 1-Top Shelf, 1-Coat Rod, 1-Coat Hook 2. Double tier, Model B: 1-Coat Rod, 1-Coat Hook 3. Triple tier, Model C: 2- Coat Hooks 4. Four tier, Model D 5. Five tier, Model E 6. Six tier, Model F C. Visible Edges: Sealed with a 1.5 millimeter PVC edge banding to closely match locker doors D. Locker Doors: 1. Laminate: 5/8 inch high-industrial grade particle board core with.030 inch vertical grade high pressure Class II-B fire retardant plastic laminate. Matching laminate applied to interior & exterior door face. a. Door edges sealed with eased edge 1.5 mm PVC edge banding to closely match laminate. E. Standard hardware: 1. Number disk, 1-1/2 Dia. flush mounted disc with 3/8 high contrast digits. US Block 1L font. 2. Coat Rod, 1 Dia. recessed rod. 3. Coat Hook(s), 2-prong metal hooks. 4. Hinges are soft-close, concealed, heavy duty European steel allowing 110 degree door opening with lifetime warranty. a. 4 hinges per door 60 H & over. b. 3 hinges per door 36 59 H. c. 2 hinges per door 35 H & under. F. Locks: Selected lock spaced vertically in door per locker type & spaced horizontally per lock type. G. Venting: 12 millimeter openings between door and top and bottom of locker and dividers on multiple opening frames provide continuous natural air flow. 2.3 FABRICATION A. Locker shall be fabricated using doweled and glued & nailed assembly process. B. Fabricate lockers square, rigid and without warp, with the finished faces flat and free of scratches and chips. C. Machine all parts and attachment holes accurately and without chips. 3.0 EXECUTION 3.1 EXAMINATION A. Do not begin installation until adjacent substrates and finishes have been properly prepared. B. Verify prepared bases are in correct position and configuration. C. If preparation is the responsibility of another installer, notify Architect of unsatisfactory preparation before proceeding. 3.2 PREPARATION A. Clean surfaces thoroughly prior to installation. B. Prepare surfaces using the methods recommended by the manufacturer for achieving the best result for the substrate under the project conditions. C. Verify adequacy of backing and support framing. 3.3 INSTALLATION A. Install in accordance with manufacturer s instructions. B. If Hollman is not contracted for installation, client must unload lockers from the delivery truck. C. Set and secure lockers in place; rigid, plumb, and level. D. Use concealed joint fasteners to align and secure adjoining cabinet units. E. Conceal screw heads with plastic caps to match locker interior. F. Secure lockers with anchor devices to suit substrate materials. Minimum Pullout Force: 100 lb (445 N). G. Install end panels, filler panels, tops and bases as indicated on the approved shop drawings. H. Install accessories. 3.4 ADJUSTING A. Adjust moving or operating parts to function smoothly and correctly. 3.5 CLEANING A. Clean locker interiors and exterior surfaces. 3.6 PROTECTION A. Protect installed products until completion of project. B. Touch-up, repair or replace damaged products before Substantial Completion. Hollman reserves the right to change the design or specifications to improve the product or process at anytime, without notice. Page 7 PL7000